| © 2007 lenovolenovo confidential lenovo onekey recovery - ver. 4.65 for y510&y710-

| © 2007 LenovoLenovo Confidential

Lenovo OneKey Recovery - Ver. 4.65 for Y510&Y710-


Disclaimer

This presentation contains specifications about unannounced products that Lenovo intends to bring to market. Please keep it confidential.

This information is subject to change without prior notice. Lenovo reserves the right not to bring any of these products to market. These products might not be made available in all countries.

If you get a call prior to Announcement, you can discuss this information ONLY IF the customer is able to give you a valid machine type and serial number (of the machine they have in their possession).

This presentation is for Lenovo Authorized Service Partners (LASPs) Internal Use Only!

Otherwise, you are not to disclose this information until Announcement.

Lenovo 3000 Y310 Series - Product Training


OneKey Recovery

• OneKey recovery is a preload tool which allow lenovo customer can easily recovery their system to the manufacture default status from a hid service partition:– Vista Home Premium – Drivers– Preload software

• Notice:• For OneKey Recovery will only restore the backup data to Partition C,

all data in partition C will lost.



System Recovery

• Turn off the system• Press the “NOVO” key

• System will boot and enter the OneKey Recovery main interface

Lenovo 3000 K Series - Product Training

NOVO


System Recovery


• There are three option button:• System Recovery• Help• Exit

• Choose System Recovery by pressing ↑ or ↓ keys, press Enter to enter the recovery prompt interface, as figured underneath:


System Recovery

• Press the E key to continue. Then the recovery progress interface appears.

• Press the C key to interrupt and quit the operation. (If you quit system

recovery, you cannot enter the normal system again!!) When System

Recovery finishes, the success prompt appears.



System Recovery

• Press any key to reboot your computer, as figured underneath:



Policy of OneKey Recovery Ver. 4.65

• Customer are allowed to restore the data to manufacture status after they backup their private data in C partition by themselves.

• Customer are not allowed to modify the contents and capacity of service partition.

• Customer are not allowed to backup the system and data to service partition.

• Customer are not allowed to rebuild the service partition or reinstall OneKey recovery tool by themselves, once they erase or destroy the partition and tool in hard disk drive, or the hard disk drive is replaced.



OneKey recovery Installation Procedure

• Customer’s service partition is damaged, or lost factory backup data• HDD is damaged and need to be replaced

• Preparation:– Laptop system from customer– Operating system disk from customer– Driver disk from customer or service center– Application disk or service center– OneKey Recovery tools disk, service center can find it from training

application– Let customer understand the risk that their data will be lost.– Backup customer data to another Hard disk drive



OneKey recovery Installation Procedure


• Build two partitions in HDD, one primary partition, one extend partition• Install operating system drivers and preload software.• Install OneKey recovery with OneKey recovery tools

• Batch command: Install.bat• Backup data with OneKey recovery tools

• Batch command: Backup.bat• Set logical partitions in free space, and format them.


Type12 partition

• Underlying storage type• Installation Command definition• Installation and uninstallation• User interface




Type12 features

- After Windows has been launched, partitions defined as 0x12 will not be mapped as a drive letter.

- Windows device manager cannot manipulate 0x12 (EISA configuration)

- Gdisk, PQMagic can manipulate Type12 partition



Preparing IdeaPad onekey recovery system

>hsetup.exe /quick>hdtool.exe /clr

>hdtool.exe /0201 30m /1003 12000m /sy>hsetup.exe /0201 r4621nEN.bin>hdtool.exe /cre fat32 100m>hdtool.exe /mbr>hdtool.exe /hid

Type12 preparation process



MBR

C: D:

> hsetup.exe /quick> hdtool.exe /clr

What above command does：> delete existing service area （ if any）

Setup command resolution



MBR C: D: Service Area i.e 12000MB

Setup command resolution ( service area )

>hdtool.exe /0201 30m /1003 12000m /sy

What above command does：

define serivice area and its size from the last logical space. i.e: 12000MB in above line.



MBR C: D: Service Area

Setup command resolution (service area)

>hsetup.exe /0201 r466nru.bin

Its role：

Install onkey recovery files into service area



Setup command resolution (service area)

>HDTOOL /cre fat32 100mcreate 100m space in service area

>HDTOOL /mbrmodify MBR

>HDTOOL /hidmodify partition id as 0x12

MBR C: D: Service Area



Type12 review

• Before installation, make sure the disc has been partitioned, which is no less than two partitions.

• After installation of onkey recovery system, format the partition before the service area.

• It is strongly suggested that system partitions should not be changed.



Note:Onekey recovery installation package is available as an image.

OKR installation and Backup process

Before installationOnkey recovery system installation disc

Prepare OKR465 utility bootable disc.

Hard disk IDE or SATA



MSCDEX Version 2.25

Copyright © Microsoft Corp. 1986 – 1995. All rights reserved.

Driver F: - Driver MSCD001 unit 0

Your CD-ROM is drive F

To view help, type HELP and then press ENTER.

A:\>_

A:\>f:

F:\>_

NOTE:Above example is just a references, actual drive letter may vary in your operation

Install demo

Lenovo IdeaPad Y510



F:\>type Install.bathsetup.exe /quickhdtool.exe /clr

hdtool.exe /0201 30m /1003 12000m /syhsetup.exe /0201 r4621nEN.binhdtool.exe /cre fat32 100mhdtool.exe /mbrhdtool.exe /hid

Type and check the batch file

Install demo



F:\>Install.bat

Note:Actual name of the installation batch file may vary with different versions. Please check using type command .

Install onekey recovery



F:\>backup.bat

Complete step by step

• Restart the computer• Install OS• Install drivers• Install software

Then start computer with onekey recovery CD that you burned.Execute the following command to backup system file in order to recover later in the case of system failure.



Three methodFirst:

>Delete.bat

Second: > hsetup.exe /quick > hdtool.exe /clr

Third: Delete TYPE12 partition

Onekey recovery unistallaton



FAQ

Q: After unistalling onekey recovery system, previous data still exist in the service data area.A: HDTOOL /CLR command only deletes service area, not data itself.

Q: What happens when onekey recovery system is installed on a hard disc which has only one partition – C: .A: partition C will either be changed or even damaged. So avoid installng onekey utility on system with only one partition.


End


| © 2007 lenovolenovo confidential lenovo onekey recovery - ver. 4.65 for y510&y710-

Documents

system recovery help

system recovery finishes

lenovo customer

onekey recovery tool

recovery prompt interface

recovery progress interface

laptop system

normal system