© 2008 ibm corporation notes: (c) 2004 ibm corp. all rights reserved. visit periodically for the...

© 2008 IBM Corporation

Notes:(c) 2004 IBM Corp. All rights reserved.

Visit www.ibm.com/pc/safecomputing periodically for the latest information on safe and effective computing.

Warranty Information:For a copy of applicable product warranties, write to: Warranty Information, P.O. Box 12195, RTP, NC 27709, Attn: Dept. JDJA/B203.

IBM makes no representation or warranty regarding third-party products or services including those designated as ServerProven or ClusterProven.

All offers subject to availability.IBM reserves the right to alter product offerings and specifications at any time without notice.IBM is not responsible for photographic or typographic errors.

This publication was developed for products and services offered in the United States.IBM may not offer the products, services or features discussed in this document in other countries.Information is subject to change without notice.Consult your local IBM representative for information on offerings available in your area.

All statements regarding IBM's future direction and intent are subject to change or withdrawal without notice, and represent goals and objectives only.

Contact your local IBM office or IBM authorized reseller for the full text of a specific Statement of General Direction.

The examples given in this paper are hypothetical examples of how a customer can use the products described herein and examples of potential cost or efficiency savings are not based on any actual case study.

There is no guarantee of comparable results.Many factors determine the sizing requirements and performance of a systems architecture.IBM assumes no liability for the methodology used for determining the configurations recommended in this document nor for the

results it provides.Any performance data contained in this presentation was determined in a controlled environment, therefore the results obtained in

other operating environments may vary significantly.Some measurements quoted in this presentation may have been made on development-level systems - there is no guarantee these

measurements will be the same on generally-available systems.Some measurements quoted in this presentation may have been estimated through extrapolation.Actual results may vary. Users of this presentation should verify the applicable data for their specific environment.


IBM Systems & Technology GroupSystem x and BladeCenter®

OUT WITH COMPLEXITY. OUT WITH INEFFICIENCY. OUT WITH CABLES.

IBM BladeCenterin Today’s Data Center. Blade Symposium Bedfont11th/12th November 2008

System x Brand Manager UKINick Slater


Agenda

System x Portfolio

Customer Challenges

BladeCenter Strategy

iDataplex


Scale out / distributed computing

BladeCenter

x3550

x3650

x3250 M2

x3850 M2

Clusters andvirtualization

High density

Large symmetrical multiprocessing (SMP)

x3950 M2

Cluster 1350

IBM x86 portfolio leads the industry

x3400x3500

x3200 M2

Sca

le u

p /

SM

P c

om

pu

tin

g

x3755

x3655

x3455 iDataPlex

x3350

x3450


Customer Challenges

Business Continuity•24/7/365 Requirements Reduced Maintenance Window

•DR Strategy,

•Cost.

IT Optimisation•Multiple model & multiple system Image (1 app = 1 os = 1 server)

•Resource Capacity utilisation (Server, Datacenter, Personnel)

•Cost

Compliance•Data duplication and sprawl

•Security considerations

•Cost!

Green AgendaStakeholder & Customer Perceptions

DataCenter Limitations

Cost!

"The uncomplicated policy of adding

more and more boxes to hold data is

unsustainable economically and

environmentally.

Something has to change, then –

and quickly."


Issue Identification - IT as “Problem”

…Of global CO2 Emissions


Source: IDC

Sca

le u

p /

SM

P c

om

pu

tin

g

BladeCenter TBladeCenter H

Large symmetrical multiprocessing (SMP)

‘Bricks’

‘Blades’

LS21

x3755

HS21

‘Classic Servers’

Scale within / Virtualisation

Scale out / distributed computing

© 2008 IBM Corporation8

Cool Blue™ Portfolio

IBM Director Active Energy Manager™ Optimize and manage datacenter power and coolingTake the guess work out of datacenter power managementMore accurate data center planning helps maximize datacenter performance

Power Configurator Get IT right from the startCalculate Energy savings before deployingMeasure real maximum power requirements

Virtualization tuned & managedMaximize productivity and utilizationDeliver optimal server performance within capital budgets for energyLower TCO and match business objectives with server performance capability

Rear Door Heat ExchangerCapitalize on total data center potentialMaximum performance per watt per square footRemove 55% of heat from racks

IBM Site & Facility ServicesThermal Analysis for High Density Computing Integrated Rack Solution for High Density Computing Scalable Modular Data Center for Small and Medium-sized Businesses


A common set of blades A common set of industry-standard switches and I/O fabrics Common management infrastructure

The RIGHT choice of chassis…

IBM BladeCenter S Distributed, small

office, easy to configure

IBM BladeCenter E Enterprise, best

efficiency, best density

IBM BladeCenter H Enterprise high

performance

IBM BladeCenter T Ruggedized, short-

depth

IBM BladeCenter HT Ruggedized, high

performance

Stable platform through 2011+…

…not rip & replace!


IBM Roadrunner runs on AMD Blades!

IBM recently announced a new milestone in compute performance– Over 1,000,000,000,000,000 (1000 Trillion) Floating Point Operations Per Second

Under the hood of this supercomputer is an engine that screams– 3456 x LS21 blades w/16GB RAM each 2x 2210 1.8GHz Opteron processors

– 6480 x QS22 blades powered by IBM’s own Cell Broadband Engine

– # 3 Green Super Computer With the BladeCenter LS21, any enterprise can leverage the same hardware that

goes into the fastest supercomputer in the world! The LS22 takes performance a step further

– More than 2x performance

LS21 QS22 BladeCenter H

++ ++ == FAST!FAST!

Breaking the petaflop barrier


Reduce TCO by 1/4Reduce power by 1/3

Reduce floor space by 1/2Integrate everything into 1

4433

2211

BladeCenter Solutions – Value Proposition

Traditional Rack Servers

BladeCenter

Line Of Business Executive Simplifies and optimizes my infrastructure Reduce my IT costs and headaches Increases my productivity – solutions that meet my needs High density footprint – Unobtrusive!

IT Executive Powerful integration; Simplified cabling and cooling Easy to deploy, maintain and scale as my needs grow; Easy to manage and Secure Increased availability and reliability Wide availability of applications – Windows, Linux, AIX


Other44%

Planar4%

PCI3%

Memory11%

Processor30%

Standby2%

HDD6%

Processor

Memory

PCI

Planar

HDD

Standby

Other

What’s using the power?

The processor power growth is the largest single contributor but there are many other areas- the more you pack into a server the more power it needs!

HDD7%

Standby2%

Processor46%

Memory13%

PCI4%

Planar5%

Other25% Processor

Memory

PCI

Planar

HDD

Standby

Other

OTHER?

•AC to DC Transitions

•DC to DC Deliveries

•Fans and air movement

Low Voltage processors help

in this area

BladeCenter helps in this area


Get robust power management with Active Energy Manager

Trackheat emitted

Compare rackactual power vs.label power

Trend poweruse over time

Compare actual vs. name platepower at system level

View inlet andexhaust temperature

Trend temperatureover time


Introducing Active Energy Manager power virtualization

Rack density is based on power consumption estimates, which typically leads to a 20% over allocation of power

Result is multiple servers, each with wasted overhead power

Allocation before Active

Energy Manager

Server 1

Server 6

Server 5

Server 2

Server 4

Server 3

Server 7

With Active Energy Manager exact power usage is possible

Server 1

Server 6

Server 5

Server 2

Server 4

Server 3

Server 7

Server 8

Server 9

Allocation after Active

Energy Manager

+2 additional servers

Power is virtualized so you can add more servers The power virtualization feature

allows you to turn that wasted power into real productivity

Put the power where you need itNEW


Simplify your infrastructure and gain control

Layer 2 Switches

Storage Fibre

Switches

StorageFibre

Switches

FileServers

WebServers

SecurityGateway

WebSphere Application

Servers

NetworkServers

ApplicationServers

SecurityServers

ApplicationServers

SAN

Layer 4-7 Switches

Public Internet/Intranet Clients

Routers (L3 Switches)

Firewalls

Public Internet/Intranet ClientsRouters Firewalls

SAN

Multiple server management tools reduced to one

SAN cables removed

LAN cables removed

Multiple external switches integrated inside the chassis

KVM costs eliminated

PDU costs drastically reduced

Power, heat and floor space conserved

RIGHT


Components of the IBM BladeCenter

There are several components that make up an IBM BladeCenter. These components include:

– Blade Servers

– Ethernet Components

– Fibre Channel Components

– High Speed Solution Components


BladeCenter protects your critical business operations

Engineered for reliability Dual power connections Thermal/cooling redundancy Dual blade connections for all I/O Dual switch modules Dual paths through backplane Dual Management Modules Dual N+N power topologies True N+N thermal solutions

Engineered for availability Automated failover capability via Management Module Management Module monitors health of chassis components Comprehensive Predictive Failure Analysis® proactively identifies

many potential issues before they cause failures First Failure Data Capture helps provide integrity of error reporting Light Path Diagnostics for easy trouble shooting

No single point of failure

RIGHT


Meet BladeCenter S; the most exciting BladeCenter yet!

By tailoring BladeCenter S for the Mid-market, IBM is calling the same highly successful play that stormed BladeCenter into dominant market share in the

Data Center

Up to 6 Application blades

Up to 12 3.5 disks - 3.6TB SAS or 6TB SATA

SAS connection to disk

Easy to set up with walk through GUI for storage

Redundant power and cooling

Single Mgmt Module


IBM BladeCenter Office Enablement Kit

Ideal way to deploy BladeCenter S into office environments

Includes Acoustical Module built into the back

Optional Air Filter on the front

Locking door for security

Mobile with rollers

33% (4U) extra room to grow

Available now!


EthernetFibre Channel

InfiniBand

InfiniBand™

Fibre ChannelInfiniBand

1Gb EthernetiSCSISAS

Fibre Channel

Extend blade benefits to connect your entire business

I/O tailored to your specific needs

A common set of blades

A common set of industry-standard switches and I/O fabrics

A common management infrastructure

1Gb, 10GbEthernet

OPEN


Increase number of connections per blade

Unleash blade capacity Virtualization and multi-core environments require more connections

– MSIM and BladeCenter H double the number of blade connections

Double your connectivityIncrease your Ethernet and Fibre Channel connections

– New expansion cards allow up to 8 simultaneous connections per blade

Help protect your investmentNo need to qualify new switch modules

– Supports standard BladeCenter switches in new high-speed switch slots of BladeCenter H

Dual 4G Fibre Channel HCA

Dual Fibre Channel/EthernetExpansion Card

Multi Switch Interconnect Module

(MSIM)

More ports, more flexibility for more applications

OPEN


HS21 XMVirtualization

HS12Entry & SMB

LS22High Performance

Computing

HS21General Purpose

Enterprise

QS22High-performance

A common set of blades A common set of industry-standard switches and I/O fabrics Common management infrastructure

The RIGHT choice – not just the ONLY choice

JS22High-performance

with native virtualization

JS12 ExpressGreat Value

forAIX and IBM i

LS42Scalable, enterprise

performance

HC10Workstation


You’re in good company with the IBM BladeCenter community

Hardware vendors Access to BladeCenter specs Basic technical help 500 companies have downloaded

Open Specification

Blade.org

IBM OEMs

Alliance Program

IBM Collaborators

Accelerating blade platform-based solutions to market

Increasing the number of blade platform solutions

Increasing end-user confidence in blade platform solutions

More than 90 members

Working together to bring offerings to market

BNT Brocade Cisco Emulex McData QLogic Voltaire Devon IT

Hardware and software Making product info available More than 300 members

Network equipment providers Appliances Server vendors

OPEN


IBM BladeCenter PN41 Overview

Overview:• New Specialized, high performance NGN Blade for Deep

Packet Inspection (DPI) of network traffic• DPI looks beyond addresses & ports into packets to deliver

unprecedented visibility, service control and security of network traffic. DPI enables whole new classes of applications

• Application examples available include:– P2P Control, DNS Defender, IPv6 Transition Gateway, Lawful

Intercept, Multi-level Security Guard, DDoS Protection

• Plus, open development environment language using Eclipse-based IDE enables rapid application development with rich services content

• Partnered with CloudShield Technologies of Sunnyvale, Calif. on core technology, application expertise and services

Benefits:• Secure and protect network Infrastructure; from ‘bots’, BGP,

Distributed Denial of Service and DNS attacks

• Lower costs: Save bandwidth by controlling Peer-to-Peer (P2P) traffic and insuring Quality-of-Service (QOS)

• Increase revenue with new service offerings and billing models with security and bandwidth/traffic allocations

Reference Press Release at ClouldShield.com

Key Facts:

DPI blade – 20 Gbps throughput

Supported in H and HT Chassis

Announcement Sept 2nd, 2008

Availability October 17, 2008

24


Themis Joint Development with IBM and Sun Themis has a long history building UltraSPARC workstations on a “Blade-

like” form-factor

IBM approached Themis about building an UltraSPARC based Blade Server for the BladeCenter

Themis, IBM and Sun Engineering teams worked closely together to insure the T2BC integrated seamlessly into the BladeCenter Environment.

UltraSPARC T2 Processor

Solaris Operating System

BladeCenter


Joint Innovation on Themis T2BC Blade Server Sun UltraSPARC T2 processor on an IBM BladeCenter

compatible Blade– Up to 8 Processor Cores

– 64 Simultaneous Threads Runs Solaris 10 Up to 32 GB DDRII Memory Two SATA or One SAS Drive Multiple Fabric Interfaces

– 2 Integrated GigE controllers

– Additional GigE, FibreChannel or InfiniBand® ports with standard IBM daughter cards

– Two 10 GigE ports with optional T2BC specific daughter card

Designed to be compatible with all BladeCenter Chassis including the T, H & HT


Introducing IBM BladeCenter LS22A high-performance blade for memory-intensive applications

IBM BladeCenter LS22

Optimized for speed – more than 2x as fast as the previous generation

Up to 8 processor cores

Up to 32GB of fast 800MHz memory

A memory booster standard

PLUS up to two internal storage bays for SAS or solid state drives

PLUS an internal USB 2.0 port


LS22 memory booster improves memory performanceUp to 96% faster memory throughput in dual-socket configuration running applications requiring fewer cores and more capacity memory

Remote memory access via HT Paddle CardRemote memory write instructionRemote memory read instructionKey

Local memory read instructionLocal memory write instructionLocal memory access

Remote memory access (standard)Remote memory write instructionRemote memory read instructionKey

Local memory read instructionLocal memory write instructionLocal memory access

With the LS22 memory booster, remote memory access runs up to 96% faster for read and 60% faster

for write instructions

Without the LS22 memory booster, remote memory access can slow down an application significantly


Introducing IBM BladeCenter LS42An energy-efficient 4P blade with great performance & price

IBM BladeCenter LS42

Optimized for power, performance and price

Innovative modular design for easy scaling and investment protection

Up to 16 processor cores

Up to 64GB of fast 800MHz memory

PLUS up to two internal storage bays for SAS or solid state drives

PLUS an internal USB 2.0 port


IBM HS21 XM – optimized for virtualizationMaximum density in a 30mm blade

Latest Intel Xeon 5200 and 5400 Series –

Best performance per watt

8 Std. Fully Buffered DIMMs

Better memory-processor performance

Modular Flash Drive with embedded hypervisor

Secure internal location modular device consumes 1W

2.5” Solid State or SAS HDD

Flexible choice - solid state drive consumes 2W

Redundant connectors to the midplane

Fewer potential points of failure in blade chassis

Double the I/O ports – now 8 per bladeWith M-SIM module in BC-H


IBM BladeCenter Open Fabric Manager helps you get the most from your I/O

What is BladeCenter Open Fabric Manager?

Software utility in the Advanced Management Module– Assigns and manages MAC and WWN addresses for blade deployment and re-deployment via a single AMM for up to 100

chassis

An optional stand-alone utility for advanced functions– Assigns and manages MAC and WWN address for blade deployment and re-deployment

– Creates blade failover pools and triggers event action plans

– Provides I/O parameter and VLAN migration in case of failover

Embedded switch enhancements– Has an easy-to-use GUI for switch configuration

– Allows switch stacking for network simplification

EASY


Blade 2

Automate failover with Open Fabric Manager

Ethernet MAC addresses are assigned to blade slot by the Advanced Management

Module

MA

C 1

MA

C 2MA

C 3

MA

C 4

Cisco or BNT switch

Cisco or BNT switch

Blade 1

Blade 14

Advanced Management Module

Blade 2

VLAN A

VLAN B

VLAN C

VLAN D

EASY


Automate failover with Open Fabric Manager

MA

C 1

MA

C 2MA

C 3

MA

C 4

Cisco or BNT switch

Cisco or BNT switch

Blade 1

Blade 14

New blade inherits I/O addressesmove to new blade assigned to

slot

MA

C 1

MA

C 2

Blade 2

MA

C 3

MA

C 4

SpareM

AC

3MA

C 4Advanced

Management Module

VLAN A

VLAN B

VLAN C

VLAN D

EASY


System x Positioning by Workload

iDataPlex

Server Farms

EXA

Dense

Tower + Rack

Traditional

BladeCenter

Easy

Server Workload

ClientWorkload

Infrastr

ucture

Simplifi

catio

n

Virtualization

Consolidation

Massive ParallelComputingIndividual

Application Serving

HC10W

orkstationVirtualClient

Hosted

Client


Customers Spoke, We Listened….

Customer Requirements

Low hardware and operating cost

Efficient power and cooling

“Usable” density

Single point of management

Open infrastructure

Flexible configuration

Rapid scalability

Global deployment

IBM interviewed the customers listed and asked what they needed


Optional iDataPlex Rear Door Heat

Exchanger

Optional iDataPlex Rack Management

Appliance

Combines Nodes, Chassis, Switches, PDUs, Management Appliances and Heat Exchangers to custom fit business needs

PDUs

ChassisServers100U iDataPlex Rack

InfrastructureiDataPlex Solution

Switches

iDataPlex - A More Efficient Form Factor For Data Centers

Flex Nodes 2U Chassis

3U Chassis

Drives & Options


Flex Node Chassis

Shared Power Supply

2 by 1U

Chassis

Shared Fans

System Trays

Contains shared power supply and fans Servers slide out the front Chassis docks into floating AC plug fitted to the mounting rails Servers slide into the front of the chassis docking into the shared power supply


First server types

* With 8GB DIMMs when available

IBM System x iDataPlex dx340

August 2008

Power-optimized Dual Socket

Processor: Quad-Core Intel Xeon Memory: 16 DIMM / 128 GB max*1600 Mhz FSBStoakley – Intel Design

IBM System x iDataPlex dx360

August 2008

High-performance Dual Socket

Processor: Dual or Quad-Core Intel Xeon Memory: 8 DIMM / 64 GB max*667 Mhz FSBBensley – Intel Design


New Power Champion

System* 1U Server iDataPlex

Minimum power drawMaximum power draw

222W288W

138W195W

* Dual Intel LV Processors, 8GB Memory (4x 2GB), 4x 500GB SATA Disks, 1U server w/ 450W P.S. and iDataPlex w/ 375W P.S.

900W Dual-zone

375W Single-zone

40% Power Savings

High Efficiency from Data Center Power Source to the Server 90%+ efficient power supplied 375W & 900W optimization Low voltage and standard processors supported Power-efficient BIOS


Optional Rear Door Heat Exchanger

iDataPlexTypical Enterprise Rack

Top View

Full fan air depth

Half fan air depth

Rack Innovated Power & Space Savings

New DataCenter optimized Rack design -Double server density per rack– 100U in a standard enterprise dimension 42U rack - 84U of servers + 16U for Infrastructure components– Save on data center overhead - floor space, cooling infrastructure, etc.

Air Flow Efficiency = Fan Power Savings– Shallow depth rack reduces the amount of air needed to cool by half – Cuts cooling costs 20% compared to equivalent compute power in an enterprise rack

Rear Door Heat Exchanger – Ultimate in Cooling Savings– Virtually eliminates heat exhaust from the rack

42U Enterprise Rack1

42U Enterprise Rack2


iDPx Rack Exhaust w/o RDHx iDPx Rack Exhaust with RDHx

Number of Servers

Room Temperature

Server heat output

Heat output to datacenter

Temperature output to datacenter

iDataPlex 84 25C/77F 48,000 BTU 48,000 BTU 33C/91F

iDataPlex with RDHX

84 25C/77F 48,000 BTU 0 BTU 17C/62F*

*The Rear Door Heat Exchanger can actually remove more heat than the servers create


‘iDataPlex looks like the next logical evolutionary step from

System x racks and BladeCenter.’

-Charles King, PUND-IT

‘Everything was focused on Solutions vs Components, a

real plus’ -Jed Scaramella, IDC

What the industry experts have to say….

‘IBM had taken an original approach that seemed to place

it ahead of rivals’

"There's a small group of customers but staggering volumes of servers,"

“Nice layout….quiet”


IBM Center for Microsoft Technologies History

– Founded in 1993

– Kirkland Programming Center (KPC)

– 50,000 sq ft complex on Lake Washington in Kirkland, WA

– Minutes from Microsoft’sWorldwide HQ in Redmond, WA

– About 100 Engineers and Developers

– $18M Annual Operating Budget

– The only IBM facility with Microsoft Windows Source Code

Mission– Product Development

– Test, Certification and Logo Support

– Technical Sales and Customer Support


Summary

500 1000 1500 2000 2500 3000 3500

For the 14th consecutive year, IBM led the IT industry.

2007 Patents

IBM

Matsuhita

Canon

Hewlett Packard

Micron Technology

Samsung

Intel

Hitachi

Sony

Toshiba

Innovation with REAL value

– Provides X-Architecture foundation for IBM System x Enterprise Servers

– Combines breakthrough technology with industry-standard hardware and software

– Sparks a revolution in server consolidation and efficiency

– Achieves major performance advantages

– Builds a cost-effective, flexible IT environment

– Enables businesses to become more agile, environmentally efficient and productive


IBM Systems & Technology GroupSystem x and BladeCenter®

OUT WITH COMPLEXITY. OUT WITH INEFFICIENCY. OUT WITH CABLES.

Thank you very much


Footnotes

(c) 2004 IBM Corp. All rights reserved.

Visit www.ibm.com/pc/safecomputing periodically for the latest information on safe and effective computing. Warranty Information: For a copy of applicable product warranties, write to: Warranty Information, P.O. Box 12195, RTP, NC 27709, Attn: Dept. JDJA/B203. IBM makes no representation or warranty regarding third-party products or services.

IBM makes no representation or warranty regarding third-party products or services including those designated as ServerProven or ClusterProven.

All offers subject to availability. IBM reserves the right to alter product offerings and specifications at any time without notice. IBM is not responsible for photographic or typographic errors.

This publication was developed for products and services offered in the United States. IBM may not offer the products, services or features discussed in this document in other countries. Information is subject to change without notice. Consult your local IBM representative for information on offerings available in your area.

All statements regarding IBM's future direction and intent are subject to change or withdrawal without notice, and representgoals and objectives only. Contact your local IBM office or IBM authorized reseller for the full text of a specific Statement of General Direction.

The examples given in this paper are hypothetical examples of how a customer can use the products described herein and examples of potential cost or efficiency savings are not based on any actual case study. There is no guarantee of comparable results. Many factors determine the sizing requirements and performance of a systems architecture. IBM assumes no liability for the methodology used for determining the configurations recommended in this document nor for the results it provides. Any performance data contained in this presentation was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements quoted in this presentation may have been made on development-level systems. There is no guarantee these measurements will be the same on generally-available systems. Some measurements quoted in this presentation may have been estimated through extrapolation. Actual results may vary. Users of this presentation should verify the applicable data for their specific environment.


Information in this presentation concerning non-IBM products was obtained from the suppliers of these products, published announcement material or other publicly available sources. IBM has not tested these products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.

Prices do not include tax or shipping and are subject to change without notice. [Price includes applicable discounts.] Reseller prices may vary. Unless otherwise specified, pricing informationis current as of original publication of this document.

MB, GB, and TB = 1,000,000, 1,000,000,000 and 1,000,000,000,000 bytes, respectively, when referring to storage capacity. Accessible capacity is less.; up to 3GB is used in service partition. Actual storage capacity will vary based upon many factors and may be less than stated. Some numbers given for storage capacities give capacity in native mode followed by capacity using data compression technology.

Maximum internal hard disk and memory capacities may require the replacement of any standard hard drives and/or memory and the population of all hard disk bays and memory slots with the largest currently supported drives available.

Telephone support may be subject to additional charges. For onsite labor, IBM will attempt to diagnose and resolve the problem remotely before sending a technician.

IBM, the eight bar logo, eServer, xSeries, BladeCenter, ServerProven, ClusterProven, and ServeRAID are registered trademarks of International Business Machines Corporation in the U.S. and other countries.

Intel, Intel Inside, the Intel Inside logo, Pentium, Celeron and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation.

Other company, product and service names may be trademarks or service marks of others.

© 2008 ibm corporation notes: (c) 2004 ibm corp. all rights reserved. visit periodically for the...

Documents

ibm bladecenter

ibm corporation notes

ibm x86 portfolio

local ibm office

local ibm representative

ibm authorized reseller

warranty information

latest information