© 2009 cisco systems, inc. all rights reserved.small business tg 1 sbbu small business wireless...

© 2009 Cisco Systems, Inc. All rights reserved.Small Business TG 1

SBBU Small Business Wireless Portfolio


Wireless Access Point portfolio

WAP200E

WAP200

WAP4410NWET200

Wireless Bridge

802.11g 802.11n

Outdoor

Indoor


Security

Performance/

Mgm

t

Access Point Business Focus Cisco Small Business solution purpose-built to meet the needs of

the small businessesSpecific features are:

Multiple BSSIDs - Solution acts as multiple APs each serving a different wireless network or VLAN. Can use for secure Business network and Guest Access802.1q VLANs - Multiple VLANs keep traffic separate on the LAN sideWPA2 Enterprise – Secure, centralized authentication using a RadiusNew Client and New AP detection – alerts administrator when new Access Points and clients enter the airspaceWMM QoS – Wireless Quality of ServiceGigabit Interface on 11n – high performance802.11F Roaming – Mobility for Wireless clients while connectedAuto-channel Selection – Selects optimal channel for best performanceSNMP – Monitoring from an SNMP Management station


QoS

and R

ange

802.1p QoS to WMM mappingMapping of Wired to wireless QoS maintains consistent Voice/Video quality across both domains

WDSWireless Bridging for building-to-building applications

PowerPOE – Flexibly install AP in optimal locationsU-APSD – optimizes battery power usage of connected WIFI phones

Additional Small Business Features

Pow

er


Wireless Solution ExampleKey Features:

802.11g WiFi with PoE

Multiple SSID->VLAN Mapping

Security and QoS802.1x, WPA, WMM

Multiple AP ModesAP, P to P, P to MP

WAP200PoE or AC/DC Power

Data SSIDVoice SSID

CustomerData

WiFi IP Phone

SRW224G4PManaged PoE SW

WAP200E WAP200E

Guest SSID

Internet

Router/Gateway

Guest


WAP4410N Overview Small Business focused Wireless-N (IEEE 802.11n Draft 2.0

compliant) Key Features

Multiple BSSIDs (4) – Segment wireless network amongst workgroups & guestsWireless Distribution System (WDS) – Bridging and Repeater capabilities for extended reach and deployment scenarios.

Robust security capabilities such as WPA2, an 802.1x supplicant, Rogue AP Detection

Key Differentiators –WDS, Multiple BSSIDs, 802.1x supplicant, VLANs, QoS, WMM

Availability – Now Shipping


SecurityWi-Fi Protected Setup (WPS)802.1x supplicant for wired LAN interfaceWireless Client Isolation between SSIDsMultiple BSSIDs – optional HTTP RedirectRogue AP detection

Advanced TechnologiesWireless Distribution System (WDS)Supports 802.11n Draft v2.0IPv6 SupportWMM to 802.1p QoS (Layer-2 prioritization)Wireless Load Balancing

Product & Feature Enhancements


WAP4410N - Features & Benefits1. Feature: Wireless-N Draft 2.0 Benefit: Maintains throughput at much greater range without interruption

and increased interoperability.Wireless-N Draft 2.0 Certified (Wi-Fi) MIMO: Multiple input / Multiple output using 3x3 (Tx x Rx) AntennasWi-Fi Certified – WMM, U-APSD (WMM Power Save), WPA(2)

2. Feature: Rogue AP detection Benefit: Notifies the administrator when unapproved Access Points are

detected within the airspace. Monitor devices being used in the network and in the vicinity of the business

3. Feature: 802.1x Supplicant Benefit: Allows AP to authenticate to the wired network via RADIUS

4. Feature: HTTP redirect Benefit: Allows the display an HTTP Splash screen or company network

usage policy when clients associate with the AP


Features & Benefits5. Feature: IPv6 Benefit: Delivering the infrastructure to support IPv6-enabled

applications. Peer-to-peer applications like Meetingspace in Vista operates efficiently with IPv6 - uses IPv4 as a last resort SBBU has IPv6 functionality across switches, routers, NAS, Wireless,

Cameras, etc.Dual IPv4/IPv6 stack allows for transitioning of a network to IPv6 in a

controlled fashion

6. Feature: Multiple BSSIDs Benefit: Solution acts as multiple APs each serving a different

wireless network or VLAN. Can use for secure Business network and Guest Access

7. Feature: Power over Ethernet (PoE) Benefit: Flexibility to install AP in optimal and hard-to-reach

locations by sharing power and data on a single cable.


Features & Benefits8. Feature: WPS (WiFi Protected Setup) Benefit: A WiFi Alliance certification for simple and secure setup of

a wireless network.

9. Feature: WMM Power Save (U-APSD) Benefit: optimizes battery power usage of connected WiFi phones

and other mobility devices.

10. Feature: WPA2 Enterprise Benefit: Secure, centralized authentication using RADIUS

11. Feature: VLANs Benefit: Multiple VLANs keep traffic separate on the LAN network

For example – separate Sales, Marketing, Admin & Engineering or Data, Voice, Video, and Guests on individual VLANs.


Features & Benefits12. Feature: Spanning Tree Benefit: Supports 802.1d Spanning Tree protocol to prevent loops when using WDS

links in a redundant fashion for fault tolerance

13. Feature: WDS (Wireless Distribution System) Benefit: Support for Wireless Bridging for building-to-building applications and

Repeater mode for extended reach of the wireless network

14. Feature: Load Balancing Benefit: This capability allows the connections to APs in the network to be spread

across multiple APs

15. Feature: Automatic channel Selection Benefit: On boot up, the AP selects the least congested channel, facilitating optimal

performance of the wireless network


WAP200 – Business Wireless-G AP Low-Cost, Feature-Rich Solution For Price-Sensitive

Environments Key Features

Multiple BSSIDsStrong QoS – 802.1p/q and WMMPOE + External PowerWPA2, WPA-ENT, WPA-PSKSSID to VLAN mappingRemovable antennasAdvanced Wireless Features

RoamingLoad BalancingAuto-Channel Selection

Key Differentiators –1x2 MIMO, Multiple BSSIDs, VLANs, WMM, Auto-channel Selection, Removable Antennas


WAP200E Outdoor Wireless AP Interior Access Point and Exterior Wireless Access Point Key Features:

POE – PD power means AP can be powered from a POE switch 1x2 MIMO – better coverage and rangeQoS (WMM, 802.1p), VLANs, WPA2, 802.1xMultiple BSSIDs; Roaming and Auto-channel selectionNEMA IP53 Weatherproof housing (WAP200E)Internal Directional Antenna

Key Differentiators –1x2 MIMO, Multiple BSSIDs, VLANs, WMM, Auto-channel Selection

Now Shipping


Product DifferencesProduct WAP200 WAP200E WET200 WAP2000 WAP4410NEthernet speed 10/100 10/100 10/100 10/100 GigabitWireless Type 802.11g 802.11g 802.11g 802.11g 802.11g/n# Ports 1 1 5 1 1POE POE or AC POE or AC POE or AC POE or AC POE or ACMIMO 1x2 1x2 1x2 1x2 2x3# Ports 1 1 5 1 1MBSSIDs 4 4 No 4 4802.1q VLAN support Yes Yes Yes Yes Yes802.1x client authentication Yes Yes Yes Yes YesWPA/2 PSK and ENT Yes Yes Yes Yes Yes802.1x AP Authentication No No No No YesSecure Management (HTTPS) Yes Yes Yes Yes YesWMM Yes Yes Yes Yes Yes802.1p Yes Yes Yes Yes YesRemovable Antennas Yes Yes Yes Yes YesRogue AP detection Yes Yes N/A Yes Rogue APMultiple Modes AP,

Repeater, Bridge

AP, Repeater,

Bridge

Client Only AP, Repeater, Bridge

AP, Repeater,

Bridge, Client

Roaming Yes Yes No Yes YesIPv6 Host - Management No No No No YesHTTP Redirect No No No No YesWPS No No No No YesLoad Balancing No No No No YesSpanning Tree No No No No YesCLI support No No No No YesMetal Casing No No No Yes NoLinksys One Ready No No No Yes NoAuto Channel Selection Yes Yes No Yes YesList Price $163 $571 $157 $214 $240


Wireless Security Monitoring Developed by Cisco-Linksys

Provides rogue AP and client detectionSupport on WAP4400N and WPC4400N, and WAP200/E + 200-series Clients – both clients and AP required

AP and clients work as wireless monitoring probesMost solutions rely on the AP onlyUsing clients increases coverage area

Light-weight client utility replaces expensive management serverStatus reports provide:

Channel usageSSIDs in use

Alerts users of new AP and ClientNo alerts for existing devices


Security Monitoring - New AP Detection

New APWAP4400N

WAP4400N


WET200 Wireless Bridge Wireless Bridge with integrated 5-port switch

Solution pairs with WAP200 and WRV200Only product with integrated 5-port switch on the market

Key Features:POE – PD power means Bridge can be powered from a POE switch 1x2 MIMO – better coverage and rangeQoS (WMM, 802.1p), VLANs, 802.1x, WPA2 securityRemovable antennas

Key Differentiators – POE, 1x2 MIMO, QoS, VLANs, WPA2, Multiple Ethernet ports

Now Shipping


200-Series Client Adapters Client solution to pair with WAP200 and WRV200

3 FlavorsWMP200 – PCI Wireless AdapterWPC200 – Cardbus Wireless AdapterWUSB200 – USB Wireless Adapter

1x2 MIMO – provides increased rangeRangebooster

Wireless 802.11G Clients with Business featuresWPA2 (ENT and PSK), WPA (ENT and PSK), WEPHigher Throughput Rogue Detection (when paired with WAP200)

WPC200 WUSB200WMP200


Wireless Adapters Comparison

Product WPC200 WMP200 WUSB200Wireless Type 802.11g 802.11g 802.11g

MIMO 1x2 1x2 1x2New AP/Client

(Wireless Security Monitor)

Yes Yes Yes

802.1x Yes Yes YesWEP Yes Yes Yes

WPA Yes Yes YesWPA2 Yes Yes Yes


Antennas HGA9N

Omni-Directional antenna for:WAP200EWAP54GPE

9 dBi Antenna Gain3600 RadiusLightning Protector and Weatherproof

HGA7SOmni-directional antenna for:

WAP200WET200

7 dBi Antenna gain


Backup


Access Point Mode AP Mode supported on all Cisco

Small Business Access Points

Network wired or wireless devices to network backbone

Primary Functionality Wirelessly connect Clients to network

Multiple SSIDs and BSSIDs – Virtual APs

With Multiple APs in a single network:

Roaming using IAPP - roam in up to 4 seconds so not conducive for roaming of WIFI phones

Auto-channel Selection – minimize interference between APs

Wireless Security Monitor – detects new APs and Clients Roam


WDS (Wireless Distribution System)Bridging and Repeater Mode

WAP200Wireless-G Access Point

Supported on WAP200/2000, WAP200E, WRV200

Network wired or wireless devices to network backbone from areas to which there’s no cabling:

WarehousesConference RoomLabs

Connect Buildings Close Together

Connect to Ethernet switch for large number of devices

Scale to a larger area with Repeater Mode

Repeater can provide expanded coverage for Multiple BSSIDs

Repeater Mode - Throughput reduced 50% for each repeater hop

Disadvantage: Can only use with products using same chipsets

In bridge mode, wireless clients CANNOT connect to the AP

Repeater Mode

Repeater Mode


WDS – Wireless Distribution SystemRepeater Mode Diagram An AP can bridge up to 3 APs in Bridge or Repeater modes

Throughput is cut in half at every hop

Up to 3 levels deep

Max 16 Repeaters


Bridging with WET200 Network wired devices to network

backbone from areas to where there’s no cabling:

Warehouses,Conference RoomLabs

Connect Buildings Close Together Connect multiple Desktop PCs,

Laptops, Printers or IP Phones across a wireless network

For Mixed Vendor Environments or products with different Wireless chipsets

Port Mirror for troubleshooting Disadvantage: Does not provide

connectivity for Wireless Clients

WET200

WAP200Wireless-G Access Point

WET200

© 2009 cisco systems, inc. all rights reserved.small business tg 1 sbbu small business wireless...

Documents