© 2009 fuji xerox co., ltd. all rights reserved. disclose to : protect until : handling: author :...

© 2009 Fuji Xerox Co., Ltd. All rights reserved.

Disclose to :Protect until :Handling : Author : Prepared on :

APO PM, OpCos PM All2yearsNo Copy etc.FX PM PLG,Oct. 2011

FUJI XEROX INTERNAL USE ONLY

Product Launch GProduct MarketingGlobal Product Sales & Marketing

Fuji Xerox Co., Ltd.

Oct 19th, 2011

Kisyu-II Hands-on


APO PM, OpCos PM All2yearsNo Copy etc.FX PM PLG,Oct.. 2011


© 2009 Fuji Xerox Co., Ltd. All rights reserved. 2

Agenda

1.Hands-on Items for This Training

2.Green – “Zero Waiting Time Experience” by RealGreen

20min

• Smart WelcomEyes

• Smart Energy Management Technology

• Speedy Recovery from Sleep Mode

3.Green – Biomass and Recycled plastics confirmation

3min

4.Convenience – Single Pass Colour DADF

7min





1. Hands-on Items for This Training





Hands-on Items for This Training

No.

Hands-on Items Point to be checked

Green

1 Zero Waiting Time Experience by RealGreen

Smart WelcomEyesSmart Energy Mgmt TechnologySpeedy Recovery from Sleep Mode

•The meaning of RealGreen in the presentation and contribution to optimal operability through three technologies•Stress-free operation throughout copy job, from startup to job completion.

2 Smart WelcomEyes •Auto recovery and its benefit•Detection area•The device does not go back into sleep mode while a user is standing in front of the device.•Device’s behavior when a user passed by the front of the device•How not to make the device automatically recover from sleep mode when approaching the device in order to pick up documents.•Administrator mode setting items （ Auto recovery ON/OFF ）•How to stop Smart WelcomEyes function for sure•CE setting items (extended detection area setting)

3 Biomass and Recycled Plastics •The position of parts

Convenience

4 Single-pass Colour DADF Rated speed, compact (small size) and light weight•Colour/Monochrome, simplex - 80ppm•Colour/Monochrome, duplex - 140ppm





2. Green - “Zero Waiting Time Experience” by RealGreen- Smart WelcomEyes





“Zero Waiting Time Experience” by RealGreen

No.

Training Content Time Remarks ✓

1-1 a) Approaching →Select “Simple Copy” since the device automatically recovers from sleep mode

b) Set documents, select “2up/duplex” and press “Start” button.c) Check that output performance will be started right away.

2min

Since it takes only two seconds to recover the device from sleep mode with Smart WelcomEyes using Smart Energy Mgmt Tech, users can start operation without waiting.

It does not require even an effort to look for the “energy saver” button.

After selecting “Copy”, Output Device irecovers in 3.9 seconds. Since users can operate UI during this 3.9 seconds, they can effectively use this time for function settings etc.

1-2 (When there is Kisyu, compare the operations of Kisyu and Kisyu-II)a)Approach→Look for “energy saver” button and press it→Wait for a while (maximum, 10 seconds)b)Select “Simple Copy” after menu screen is displayed.c)Set documents, select “2up/duplex” and then press “Start” button.d)Output (performance) is started

2min

Users press “Energy Saver” button first. (if a user is not familiar with the device, he/she will start by looking for the button.)

Wait for up to 10 seconds. During this time, users cannot make “Copy” setting etc. and cannot do anything but waiting.

・ Experience “Zero Waiting Time” through copy job

Smart WelcomEyesSmart WelcomEyes Smart Smart Energy Energy Mgmt Tech.Mgmt Tech.

Speedy Recovery Speedy Recovery from Sleep Modefrom Sleep Mode

Auto ResumingAuto Resuming

Quick OperationQuick Operation

Ready while you make your setting

Ready while you make your setting

Press Energy Saver button

Press Energy Saver button

Waiting for recovery

OperationOperation





Smart WelcomEyes

No.


2-1 a) Check the position of the sensors and reconfirm the respective roles.

1 min

See the presentation material or SIG for details.

2-2 a) Check that the sensor detects a user differently depending on how the user approaches.

1) When approaching from the left.

2min

Check the sensor/device behavior and record your feeling in check box using following character:F: Fast (no waiting)M: Medium (waiting for a little bit)S: Slow (waiting for too long time)

a-1-1: Approach from Left side with normal walking speed

a-1-2: Approach from Left side with brisk walking speed

•Getting to know new Smart WelcomEyes’ reaction better•Considering what is the appropriate response if a customer ask a question

1. Pyroelectric sensor

UserUser

Pyroelectric sensorPyroelectric sensor

2. Reflection sensor

UserUser

Reflection sensorReflection sensor

ActivateActivate Cancel Sleep mode

Cancel Sleep mode





Smart WelcomEyes

No.



2) When approaching from the right.

2min

F: Fast (no waiting)M: Medium (waiting for a little bit)S: Slow (waiting for too long time)

a-2-1: Approach from Left side with normal walking speed

a-2-2: Approach from Left side with brisk walking speed


3) When approaching from the front.

2min

F: Fast (no waiting)M: Medium (waiting for a little bit)S: Slow (waiting for too long time)

a-3-1: Approach from front with normal walking speed

a-3-2: Approach from front with brisk walking speed

2-5 b) Check the way the sensor can detect a user for sure.1) Wave the hand over the reflection sensor2) Place the hand over the reflection sensor.3) Even though the device doesn’t recover through Smart

WelcomEyes, device may recovers by setting documents on DADF (Smart Energy Management Technology)

5min

Record if it is effective or not about b-1, b-2 and b-3

b-1: Wave your hand over the sensor

b-2: Place your hand over the sensor

B-3: Place your document on DADF






Smart WelcomEyes

No.


2-5 Check that the device doesn’t enter the sleep mode while LED ramp is flashing even if there is no operation for more than one minute.

5min

Simulate the situation where a user is checking how to operate with a manual or is eagerly talking with others. Make sure to be able to explain to a customer that he/she can use the device in a stress free manner since the device does not enter the sleep mode while the sensor is detecting a user.

2-6 Check that the device will remain in the energy saving mode it is in when a user just pass by the front of the device and approaches the device to pick up the documents.a)Change the speed/ direction (from right to left/from left to right) at/with which a user passes by the front of the device and then check device’s behaviorb)Check how to approach the device and how close a user can approach without reactivating the device.

5min

Check the points described on the left column (2-6), check whether the device miss-detects or not.

a-1) From Right to Left with normal walking

a-2) From Right to Left with brisk walking

a-3) From Left to Right with normal walking

a-4) From Left to Right with brisk walking

b-1) Approach from right side and pick up your documents.

b-2) Approach from front. Go through to the right side then pick your documents up

b-3) Approach from Left. Go through to the right side then pick your documents up


The device does not sleep while the sensor is detecting a user.

The device does not sleep while the sensor is detecting a user.

Preventing unwanted sleep





Smart WelcomEyes

No.


2-7 When there is extra time, check the followings.

a)Check the setting items in Admin Tools Menu, which switches auto recovery by Smart WelcomEyes.[System Settings] > [Common Service Settings] >[Energy Saver Settings] (←TBC)

b)Check where to put the seal for complete deactivation of Smart WelcomEyes and that the sensor is not activated with the seal attached.

c)Change the detection area (CE setting: NVM Changing) and compare the differences in device’s reaction between default setting and the setting with extended detection area.[System Settings] > [Common Service Settings] >[Maintenance]>[NVM Changing]

-

Although auto recovery can be disabled, with Smart WelcomEyes, the device keeps functioning for the prevention of unwanted sleep mode described in 2-5 column (LED ramp keeps flashing as well).

The seal for those who don’t want Smart WelcomEyes function.

It is recommended that a customer with enough space for the device installation change NVM and improve convenience.

・ Getting to know new Smart WelcomEyes’ reaction better

Default setting Extended setting

Reflection sensor Reflection sensor

Pyroelectric sensorPyroelectric sensor





3. Green Biomass and Recycled plastics confirmation





Biomass and Recycled Plastics

No.


3-1 a) Open the front cover of the device and check where two kinds of Biomass Plastics are.

b) You can see “Inedible Woody Biomass Plastic” by opening the cover using a screw driver

2min

In order to correctly respond when a customer asks where Biomass Plastics are..

3-2 Take a look at the back side of the device and check the position of improved recycled parts.

1 min

In order to correctly respond when a customer asks where improved recycled parts are..

・ Check which parts are the new eco-friendly plastics

BP50 logo obtained Biomass Plastics

BP50 logo obtained Biomass Plastics

非可食BP材Knob

BP logo obtained Inedible Woody Biomass Plastic (under the shutter)

BP logo obtained Inedible Woody Biomass Plastic (under the shutter)

Renew recycled plastic. (63% recycled.)

Renew recycled plastic. (63% recycled.)

(You can skip this Item if the time is limited. You may briefly check it after the all session)





4. Convenience – Single-pass Colour DADF





Single Pass Duplex Color Scanning

Compare/check scanning speed of Kisyu-II and Kisyu

No.


4-1 Set the same documents on Kisyu-II and Kisyu

1min

Set 100-sheet mono-colour mixed documents on DADF.

Select 【 Store to Folder 】 on the 【 Services Home 】 screen with Kisyu-II .

Select 【 Store to Folder 】 on the 【 Services Home 】 screen with Kisyu as well

1min

Kisyu-II Kisyu

(You can skip this Item if the time is limited. You may cover the similar training using Volante-IV)





Single Pass Duplex Color Scanning

No.


•Select a folder randomly (any number)•[Color Scanning] = Color•[2-Sided Scanning] = [2sided]• [Original Type] = Text

1min

Press “Start” buttons of Kisyu-II and Kisyu at the same time.Check scanning speed of the two devices.Check that there is less damage to documents with Kisyu-II since documents are not fliped over.

•When there is extra time, make an comparison of simplex colour scanning since scanning speed is improved from 70ipm to 80ipm •Keeping the size and weight in mind, confirm especially that Kisyu-II is smaller and lighter than 30 ppm class device with one pass DADF manufactured by Canon when you see them in J-Smart Centre in Day2

3min

(You can skip this Item if the time is limited. You may cover the similar training using Volante-IV)

© 2009 fuji xerox co., ltd. all rights reserved. disclose to : protect until : handling: author :...

Documents

opcos pm

apo pm

fx pm plg

fuji xerox internal

handson slide

copy job

training slide

handson items