© 2012 mcgraw-hill education (asia) garrison, noreen, brewer, cheng & yuen standard costs and...

© 2012 McGraw-Hill Education (Asia)Garrison, Noreen, Brewer, Cheng & Yuen

Standard Costs and Operating Performance Measures

Chapter 12

McGraw-Hill Education (Asia) Garrison, Noreen, Brewer, Cheng & YuenMcGraw-Hill/Irwin Slide 2

Standard Costs

Standards are benchmarks or “norms” formeasuring performance. In managerial accounting,

two types of standards are commonly used.

Quantity standardsspecify how much of aninput should be used to

make a product orprovide a service.

Price standardsspecify how muchshould be paid foreach unit of the

input.

Examples: Firestone, Sears, McDonald’s, hospitals, construction and manufacturing companies.


Standard Costs

DirectMaterial

Deviations from standards deemed significantare brought to the attention of management, apractice known as management by exception.

Type of Product Cost

Am

ou

nt

DirectLabor

ManufacturingOverhead

Standard


Variance Analysis Cycle

Prepare standard Prepare standard cost performance cost performance

reportreport

Analyze variances

Begin

Identifyquestions

Receive explanations

Takecorrective

actions

Conduct next period’s

operations


Accountants, engineers, purchasingagents, and production managers

combine efforts to set standards that encourage efficient future operations.

Setting Standard Costs


Setting Standard Costs

Should we useideal standards that require employees towork at 100 percent

peak efficiency?

Engineer Managerial Accountant

I recommend using practical standards that are currently

attainable with reasonable and efficient effort.


Learning Objective 1

Explain how direct Explain how direct materials standards materials standards

and direct laborand direct laborstandards are set.standards are set.


Setting Direct Material Standards

PriceStandards

Summarized in a Bill of Materials.

Final, deliveredcost of materials,net of discounts.

QuantityStandards


Setting Standards

Six Sigma advocates have sought toeliminate all defects and waste, rather than

continually build them into standards.

As a result allowances for waste andspoilage that are built into standards

should be reduced over time.

Six Sigma advocates have sought toeliminate all defects and waste, rather than

continually build them into standards.

As a result allowances for waste andspoilage that are built into standards

should be reduced over time.


Setting Direct Labor Standards

RateStandards

Often a singlerate is used that reflectsthe mix of wages earned.

TimeStandards

Use time and motion studies for

each labor operation.


Setting Variable Manufacturing Overhead Standards

RateStandards

The rate is the variable portion of the

predetermined overhead rate.

QuantityStandards

The quantity is the activity in the

allocation base for predetermined overhead.


Standard Cost Card – Variable Production Cost

A standard cost card for one unit of product might look like this:

A A x BStandard Standard StandardQuantity Price Cost

Inputs or Hours or Rate per Unit

Direct materials 3.0 lbs. 4.00$ per lb. 12.00$ Direct labor 2.5 hours 14.00 per hour 35.00 Variable mfg. overhead 2.5 hours 3.00 per hour 7.50 Total standard unit cost 54.50$

B


Price and Quantity Standards

Price and quantity standards are determined separately for two reasons:

The purchasing manager is responsible for raw material purchase prices and the production manager is responsible for the quantity of raw material used.

The purchasing manager is responsible for raw material purchase prices and the production manager is responsible for the quantity of raw material used.

The buying and using activities occur at different times. Raw material purchases may be held in inventory for a period of time before being used in production.

The buying and using activities occur at different times. Raw material purchases may be held in inventory for a period of time before being used in production.


A General Model for Variance Analysis

Variance Analysis

Price Variance

Difference betweenDifference betweenactual price and actual price and standard pricestandard price

Quantity Variance

Difference betweenDifference betweenactual quantity andactual quantity andstandard quantitystandard quantity


Variance Analysis

Materials price varianceLabor rate varianceVOH rate variance

Materials quantity varianceLabor efficiency varianceVOH efficiency variance


Price Variance Quantity Variance



Actual Quantity Actual Quantity Standard Quantity × × × Actual Price Standard Price Standard Price






Actual quantity is the amount of direct materials, direct labor, and variable

manufacturing overhead actually used.





Standard quantity is the standard quantity allowed for the actual output of the period.





Actual price is the amount actuallypaid for the input used.



Standard price is the amount that should have been paid for the input used.





(AQ × AP) – (AQ × SP) (AQ × SP) – (SQ × SP)

AQ = Actual Quantity SP = Standard Price AP = Actual Price SQ = Standard Quantity




Another Way to Look at the Problems

Actual Quantity x Actual Price = AQ x APPrice variance

Actual Quantity x Standard Price = AQ x SPQuantity variance

Standard Quantity x Standard Price = SQ x SPTotal Variance

SQ = (Aouput x standard quantity for production) = standard quantity allowed for the actual output



Compute the direct Compute the direct materials price and materials price and

quantity variances and quantity variances and explain their explain their significance.significance.


Glacier Peak Outfitters has the following direct material standard for the fiberfill in its mountain

parka.

0.1 kg. of fiberfill per parka at $5.00 per kg.

Last month 210 kgs. of fiberfill were purchased and used to make 2,000 parkas. The material cost a

total of $1,029.

Material Variances – An Example


Material Variances: The Line-by-line Method

AQ x AP = 210 x AP = 1,029(21) F Price variance

AQ x SP = 210 x 5 = 1,05050 U Quantity variance

SQ x SP = (2000 x 0.1) x 5 = 1,00029 U Total Variance


Calculation of Actual Purchase Price (AP) per unit can be done but is not necessary because AP will not be used in subsequent calculation and the total actual purchase cost in total is sufficient for the variance calculation.


210 kgs. 210 kgs. 200 kgs. × × × $4.90 per kg. $5.00 per kg. $5.00 per kg.

= $1,029 = $1,050 = $1,000

Price variance$21 favorable

Quantity variance$50 unfavorable


Material Variances Summary



= $1,029 = $1,050 = $1,000




$1,029 210 kgs = $4.90 per

kg




= $1,029 = $1,050 = $1,000




0.1 kg per parka 2,000 parkas = 200 kgs



Material Variances:Using the Factored Equations

Materials price varianceMPV = AQ (AP - SP)

= 210 kgs ($4.90/kg - $5.00/kg)

= 210 kgs (-$0.10/kg)

= $21 F

Materials quantity varianceMQV = SP (AQ - SQ)

= $5.00/kg (210 kgs-(0.1 kg/parka 2,000 parkas))

= $5.00/kg (210 kgs - 200 kgs)

= $5.00/kg (10 kgs)

= $50 U


Isolation of Material Variances

I need the price variancesooner so that I can better

identify purchasing problems.

You accountants just don’tunderstand the problems thatpurchasing managers have.

I’ll start computingthe price variancewhen material is

purchased rather than when it’s used.


Material Variances

Hanson purchased and used 1,700 pounds.

How are the variances computed if the amount purchased differs from

the amount used?

The price variance is computed on the entire

quantity purchased.

The quantity variance is computed only on

the quantity used.


Materials Price VarianceMaterials Quantity Variance

Production Manager Purchasing Manager

The standard price is used to compute the quantity varianceso that the production manager is not held responsible for

the purchasing manager’s performance.

The standard price is used to compute the quantity varianceso that the production manager is not held responsible for

the purchasing manager’s performance.

Responsibility for Material Variances


I am not responsible for this unfavorable material

quantity variance.

You purchased cheapmaterial, so my peoplehad to use more of it.

Your poor scheduling sometimes requires me to

rush order material at a higher price, causing

unfavorable price variances.

Responsibility for Material Variances


Hanson Inc. has the following direct material standard to manufacture one Zippy:

1.5 pounds per Zippy at $4.00 per pound

Last week, 1,700 pounds of material were purchased and used to make 1,000 Zippies. The

material cost a total of $6,630.

ZippyQuick Check


Quick Check

AQ x AP = 1,700 x AP = 6,630(170) F Price variance

AQ x SP = 1,700 x 4 = 6,800800 U Quantity variance

SQ x SP = (1000 x 1.5) x 4 = 6,000630 U Total Variance


Zippy


Quick Check Zippy

Hanson’s material price variance (MPV)for the week was:

a. $170 unfavorable.

b. $170 favorable.

c. $800 unfavorable.

d. $800 favorable.



b. $170 favorable.


d. $800 favorable.




b. $170 favorable.


d. $800 favorable.



b. $170 favorable.


d. $800 favorable.

MPV = AQ(AP - SP) MPV = 1,700 lbs. × ($3.90 - 4.00) MPV = $170 Favorable

Quick Check Zippy

AQ x AP = 1,700 x AP = 6,630(170) F Price variance

AQ x SP = 1,700 x 4 = 6,800


Quick Check

Hanson’s material quantity variance (MQV)for the week was:


b. $170 favorable.


d. $800 favorable.



b. $170 favorable.


d. $800 favorable.

Zippy




b. $170 favorable.


d. $800 favorable.



b. $170 favorable.


d. $800 favorable. MQV = SP(AQ - SQ) MQV = $4.00(1,700 lbs - 1,500 lbs) MQV = $800 unfavorable

Quick Check Zippy

AQ x SP = 1,700 x 4 = 6,800800 U Quantity variance

SQ x SP = (1000 x 1.5) x 4 = 6,000


1,700 lbs. 1,700 lbs. 1,500 lbs. × × × $3.90 per lb. $4.00 per lb. $4.00 per lb.

= $6,630 = $ 6,800 = $6,000




ZippyQuick Check


Hanson Inc. has the following material standard to manufacture one Zippy:

1.5 pounds per Zippy at $4.00 per pound

Last week, 2,800 pounds of material were purchased at a total cost of $10,920, and 1,700

pounds were used to make 1,000 Zippies.

ZippyQuick Check Continued


Quick Check Continued

AQp x AP = 2,800 x AP = 10,920(280) F Price variance

AQp x SP = 2,800 x 4 = 11,2004,400 U Inventory @ Std cost

AQu x SP = 1,700 x 4 = 6,800800 U Usage variance

SQ x SP = (1000 x 1.5) x 4 = 6,000 (Quantity variance)4,920 U Total Variance

AQp = Actual Quantity PurchasedAQu = Actual Quantity usedSQ = (Aouput x standard quantity for production use) = standard quantity allowed for the actual output

Zippy


Actual Quantity Actual Quantity Purchased Purchased × × Actual Price Standard Price 2,800 lbs. 2,800 lbs. × × $3.90 per lb. $4.00 per lb.

= $10,920 = $11,200


Price variance increases because quantity

purchased increases.



Actual Quantity Used Standard Quantity × × Standard Price Standard Price 1,700 lbs. 1,500 lbs. × × $4.00 per lb. $4.00 per lb.

= $6,800 = $6,000


Quantity variance is unchanged because actual and standard

quantities are unchanged.




Compute the direct Compute the direct labor rate and labor rate and

efficiency variances efficiency variances and explainand explain

their significance. their significance.


Glacier Peak Outfitters has the following direct labor standard for its mountain parka.

1.2 standard hours per parka at $10.00 per hour

Last month, employees actually worked 2,500 hours at a total labor cost of $26,250 to make 2,000

parkas.

Labor Variances – An Example


Labor Variances

AH x AR = 2,500 x AR = 26,2501,250 U Rate variance

AH x SR = 2,500 x 10 = 25,0001,000 U Efficiency variance

SH x SR = (2000 x 1.2) x 10 = 24,0002,250 U Total Variance

AH = Actual hour paid (and worked in this case)AR = Actual rate per hourSR = Standard rate per hourSH = (Aouput x standard hours for the production) = standard hours allowed for the actual output


Rate variance$1,250 unfavorable

Efficiency variance$1,000 unfavorable

Actual Hours Actual Hours Standard Hours × × × Actual Rate Standard Rate Standard Rate

Labor Variances Summary

2,500 hours 2,500 hours 2,400 hours × × ×$10.50 per hour $10.00 per hour. $10.00 per hour

= $26,250 = $25,000 = $24,000




= $26,250 = $25,000 = $24,000


$26,250 2,500 hours = $10.50 per hour






= $26,250 = $25,000 = $24,000


1.2 hours per parka 2,000 parkas = 2,400 hours




Labor Variances:Using the Factored Equations

Labor rate varianceLRV = AH (AR - SR)

= 2,500 hours ($10.50 per hour – $10.00 per hour)

= 2,500 hours ($0.50 per hour)

= $1,250 unfavorable

Labor efficiency varianceLEV = SR (AH - SH)

= $10.00 per hour (2,500 hours – 2,400 hours)

= $10.00 per hour (100 hours)

= $1,000 unfavorable


Responsibility for Labor Variances

Production Manager

Production managers areusually held accountable

for labor variancesbecause they can

influence the:

Mix of skill levelsassigned to work tasks.

Level of employee motivation.

Quality of production supervision.

Quality of training provided to employees.


I am not responsible for the unfavorable labor

efficiency variance!

You purchased cheapmaterial, so it took more

time to process it.

I think it took more time to process the

materials because the Maintenance

Department has poorly maintained your

equipment.

Responsibility for Labor Variances


Hanson Inc. has the following direct laborstandard to manufacture one Zippy:

1.5 standard hours per Zippy at$12.00 per direct labor hour

Last week, 1,550 direct labor hours wereworked at a total labor cost of $18,910

to make 1,000 Zippies.

ZippyQuick Check


Quick Check

AH x AR = 1,550 x AR = 18,910310 U Rate variance

AH x SR = 1,550 x 12 = 18,600600 U Efficiency variance

SH x SR = (1000 x 1.5) x 12 = 18,000910 U Total Variance



Hanson’s labor rate variance (LRV) for the week was:


b. $310 favorable.


d. $300 favorable.



b. $310 favorable.


d. $300 favorable.

Quick Check Zippy




b. $310 favorable.


d. $300 favorable.



b. $310 favorable.


d. $300 favorable.

Quick Check

LRV = AH(AR - SR) LRV = 1,550 hrs($12.20 - $12.00) LRV = $310 unfavorable

Zippy


AH x SR = 1,550 x 12 = 18,600


Hanson’s labor efficiency variance (LEV)for the week was:


b. $590 favorable.


d. $600 favorable.



b. $590 favorable.


d. $600 favorable.

Quick Check Zippy




b. $590 favorable.


d. $600 favorable.



b. $590 favorable.


d. $600 favorable.

Quick Check

LEV = SR(AH - SH) LEV = $12.00(1,550 hrs - 1,500 hrs) LEV = $600 unfavorable

Zippy


SH x SR = (1000 x 1.5) x 12 = 18,000



Rate variance$310 unfavorable

Efficiency variance$600 unfavorable

1,550 hours 1,550 hours 1,500 hours × × × $12.20 per hour $12.00 per hour $12.00 per hour

= $18,910 = $18,600 = $18,000

ZippyQuick Check



Compute the variable Compute the variable manufacturing manufacturing

overhead rate and overhead rate and efficiency variances.efficiency variances.


Glacier Peak Outfitters has the following direct variable manufacturing overhead labor standard for its mountain

parka.

1.2 standard hours per parka at $4.00 per hour

Last month, employees actually worked 2,500 hours to make 2,000 parkas. Actual variable manufacturing

overhead for the month was $10,500.

Variable Manufacturing Overhead Variances – An Example


Variable Manufacturing Overhead Variances







= $10,500 = $10,000 = $9,600




Variable Manufacturing Overhead Variances Summary




= $10,500 = $10,000 = $9,600



$10,500 2,500 hours = $4.20 per hour





= $10,500 = $10,000 = $9,600



1.2 hours per parka 2,000 parkas = 2,400 hours



Variable Manufacturing Overhead Variances: Using Factored Equations

Variable manufacturing overhead rate varianceVMRV = AH (AR - SR)

= 2,500 hours ($4.20 per hour – $4.00 per hour)

= 2,500 hours ($0.20 per hour)

= $500 unfavorable

Variable manufacturing overhead efficiency varianceVMEV = SR (AH - SH)

= $4.00 per hour (2,500 hours – 2,400 hours)

= $4.00 per hour (100 hours)

= $400 unfavorable


Hanson Inc. has the following variablemanufacturing overhead standard to

manufacture one Zippy:

1.5 standard hours per Zippy at$3.00 per direct labor hour

Last week, 1,550 hours were worked to make1,000 Zippies, and $5,115 was spent for

variable manufacturing overhead.

ZippyQuick Check


Quick Check






Hanson’s rate variance (VMRV) for variable manufacturing overhead for the week was:


b. $400 favorable.


d. $300 favorable.



b. $400 favorable.


d. $300 favorable.

Quick Check Zippy




b. $400 favorable.


d. $300 favorable.



b. $400 favorable.


d. $300 favorable.

Quick Check

VMRV = AH(AR - SR) VMRV = 1,550 hrs($3.30 - $3.00) VMRV = $465 unfavorable

Zippy


AH x SR = 1,550 x 3 = 4,650


Hanson’s efficiency variance (VMEV) for variable manufacturing overhead for the week was:


b. $435 favorable.


d. $150 favorable.



b. $435 favorable.


d. $150 favorable.

Quick Check Zippy




b. $435 favorable.


d. $150 favorable.



b. $435 favorable.


d. $150 favorable.

Quick Check

VMEV = SR(AH - SH) VMEV = $3.00(1,550 hrs - 1,500 hrs) VMEV = $150 unfavorable

1,000 units × 1.5 hrs per unit

Zippy


SH x SR = (1000 x 1.5) x 3 = 4,500





= $5,115 = $4,650 = $4,500


ZippyQuick Check


Variance Analysis and Management by Exception

How do I knowwhich variances to

investigate?

Larger variances, in dollar amount or as a percentage of the

standard, are investigated first.


A Statistical Control Chart

1 2 3 4 5 6 7 8 9

Variance Measurements

Favorable Limit

Unfavorable Limit

• • •• •

••

••

Warning signals for investigation

Desired Value


Advantages of Standard Costs

Management byexception

Advantages

Promotes economy and efficiency

Simplifiedbookkeeping

Enhances responsibility

accounting


PotentialProblems

Emphasis onnegative may

impact morale.

Emphasizing standardsmay exclude other

important objectives.

Favorablevariances may

be misinterpreted.

Continuous improvement maybe more important

than meeting standards.

Standard costreports may

not be timely.

Invalid assumptionsabout the relationship

between laborcost and output.

Potential Problems with Standard Costs



Compute delivery cycle Compute delivery cycle time, throughput time, time, throughput time,

and manufacturing and manufacturing cycle efficiency (MCE).cycle efficiency (MCE).


Process time is the only value-added time.

Delivery Performance Measures

Wait TimeProcess Time + Inspection Time

+ Move Time + Queue Time

Delivery Cycle Time

Order Received

ProductionStarted

Goods Shipped

Throughput Time


ManufacturingCycle

Efficiency

Value-added time

Manufacturing cycle time=

Wait TimeProcess Time + Inspection Time

+ Move Time + Queue Time

Delivery Cycle Time

Order Received

ProductionStarted

Goods Shipped

Throughput Time

Delivery Performance Measures


Quick Check

A TQM team at Narton Corp has recorded the following average times for production:

Wait 3.0 days Move 0.5 days Inspection 0.4 days Queue 9.3 days Process 0.2 days

What is the throughput time? a. 10.4 days.b. 0.2 days.c. 4.1 days.d. 13.4 days.











Quick Check

Throughput time = Process + Inspection + Move + Queue = 0.2 days + 0.4 days + 0.5 days + 9.3 days = 10.4 days


Quick Check



What is the Manufacturing Cycle Efficiency (MCE)? a. 50.0%.b. 1.9%.c. 52.0%.d. 5.1%.











Quick Check

MCE = Value-added time ÷ Throughput time

= Process time ÷ Throughput time

= 0.2 days ÷ 10.4 days = 1.9%


Quick Check



What is the delivery cycle time (DCT)? a. 0.5 days.b. 0.7 days.c. 13.4 days.d. 10.4 days.











Quick Check

DCT = Wait time + Throughput time = 3.0 days + 10.4 days = 13.4 days


Generalized Model of the Row by Row Approach and Its Preparation of the Performance Report

(Reconcile Actual Results to the Budgeted Figures)

Supplementary Note


Generalized Model of the Row by Row Approach and Its Preparation of the Performance Report (Reconcile Actual Results to the Budgeted Figures)

Actual Quantity x Actual Price = AQ x APPrice variance

Actual Quantity x Standard Price = AQ x SPQuantity variance

Standard Quantity x Standard Price = SQ x SPTotal Flexible VarianceActivity Variance

Budgeted Quantity x Standard Price = BQ x SPStatic variance

SQ = (Aouput x standard quantity for production) = standard quantity allowed for the actual outputBQ = Budgeted quantity


Performance Report for Variance Analysis: Recall Example from Chapter 11


Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

Appendix 12A



(Appendix 12A)(Appendix 12A)

Compute and interpret the fixed overhead budget and volume

variances.


Fixed Manufacturing Overhead Variances: The Line-by-line method

Actual Fixed OverheadBudget variance

Budgeted Fixed Overhead = BH x SR (Spending variance)

Volume varianceApplied Fixed Overhead = SH x SR

Total VarianceBH = Budgeted hours (a.k.a. Denominator hours)SH = (Aouput x standard hours for the production) = standard hours allowed for the actual output


Budget variance

Fixed Overhead Budget Variance

ActualFixed

Overhead

FixedOverheadApplied

BudgetedFixed

Overhead

Budgetvariance

Budgetedfixed

overhead

Actualfixed

overhead= –


Volumevariance

Fixed Overhead Volume Variance

ActualFixed

Overhead


BudgetedFixed

Overhead

Volumevariance

Fixedoverheadapplied to

work in process

Budgetedfixed

overhead= –


FPOHR = Fixed portion of the predetermined overhead rate DH = Denominator hours SH = Standard hours allowed for actual output

SH × FRDH × FR

Fixed Overhead Volume Variance

ActualFixed

Overhead


BudgetedFixed

Overhead

Volume variance FPOHR × (DH – SH)=

Volumevariance


Computing Fixed Overhead Variances

Budgeted production 30,000 units Standard machine-hour per unit 3 hours Budgeted machine-hour 90,000 hours Actual production 28,000 units Standard machine-hour allowed for the actual production 84,000 hours Actual machine-hour 88,000 hours

Production and Machine-Hour DataColaCo


Computing Fixed Overhead Variances

Budgeted variable manufacturing overhead 90,000$ Budgeted fixed manufacturing overhead 270,000 Total budgeted manufacturing overhead 360,000$

Actual variable manufacturing overhead 100,000$ Actual fixed manufacturing overhead 280,000 Total actual manufacturing overhead 380,000$

ColaCoCost Data


Predetermined Overhead Rates

Predetermined overhead rate

Estimated total manufacturing overhead costEstimated total amount of the allocation base

=


$360,00090,000 Machine-hour

=


= $4.00 per machine-hour


Predetermined Overhead Rates

Variable component of thepredetermined overhead rate


=

Variable component of thepredetermined overhead rate


Fixed component of thepredetermined overhead rate


=

Fixed component of thepredetermined overhead rate



Applying Manufacturing Overhead

Overheadapplied


Standard hours allowedfor the actual output

= ×

Overheadapplied

$4.00 permachine-hour

84,000 machine-hour= ×

Overheadapplied

$336,000=


Fixed Manufacturing Overhead Variances

Actual = = 280,00010,000 U Budget variance

Budgeted = = 270,00018,000 U Volume variance

SH x SR = (28000 x 3) x 3 = 252,00028,000 U Total Underapplied overhead

SH = (Aouput x standard hours for the production) = standard hours allowed for the actual output


Computing the Budget Variance

Budgetvariance

Budgetedfixed

overhead

Actualfixed

overhead= –

Budgetvariance

= $280,000 – $270,000

Budgetvariance

= $10,000 Unfavorable


Computing the Volume Variance

Volumevariance

Fixedoverheadapplied to

work in process

Budgetedfixed

overhead= –

Volumevariance

= $18,000 Unfavorable

Volumevariance

= $270,000 –$3.00 per

machine-hour( ×$84,000

machine-hour)


Computing the Volume Variance

FPOHR = Fixed portion of the predetermined overhead rate DH = Denominator hours SH = Standard hours allowed for actual output

Volume variance FPOHR × (DH – SH)=

Volumevariance

=$3.00 per

machine-hour (× 90,000 machine-hour

– 84,000machine-hour )

Volumevariance

= 18,000 Unfavorable


A Pictorial View of the Variances

ActualFixed

Overhead

Fixed OverheadApplied to

Work in Process

BudgetedFixed

Overhead

252,000270,000280,000

Total variance, $28,000 unfavorable

Budget variance,$10,000 unfavorable

Volume variance,$18,000 unfavorable


Fixed Overhead Variances –A Graphic Approach

Let’s look at a graph showing fixed overhead

variances. We will use ColaCo’s

numbers from the previous example.


Graphic Analysis of FixedOverhead Variances

Machine-hours (000)

Budget$270,000

90

Denominatorhours

00

Fixed overhead applied at

$3.00 per standard hour



Actual$280,000

Machine-hours (000)

Budget$270,000

90

Denominatorhours

00



Budget Variance 10,000 U{


Actual$280,000

Applied$252,000

Machine-hours (000)

Budget$270,000


908400

Standardhours



Denominatorhours

Budget Variance 10,000 U

Volume Variance 18,000 U

{{


Reconciling Overhead Variances and Underapplied or Overapplied Overhead

In a standardcost system:

Unfavorablevariances are equivalent

to underapplied overhead.

Favorablevariances are equivalentto overapplied overhead.

The sum of the overhead variancesequals the under- or overapplied

overhead cost for the period.


Reconciling Overhead Variances and Underapplied or Overapplied Overhead

Predetermined overhead rate (a) 4.00$ per machine-hour Standard hours allowed for the actual output (b) 84,000 machine hours Manufacturing overhead applied (a) × (b) 336,000$ Actual manufacturing overhead 380,000$ Manufacturing overhead underapplied or overapplied 44,000$ underapplied

Computation of Underapplied OverheadColaCo


Variable Overhead Variances

AH x AR = = 100,00012,000 U Rate variance

AH x SR = 88,000 x 1 = 88,0004,000 U Efficiency variance

SH x SR = 84,000 x 1 = 84,000(= 28,000 x 3) 16,000 U Total Variance

SR = Standard rate per hour = Total underappliedSH = (Aouput x standard hours for the production) variable overhead = standard hours allowed for the actual output


Computing the Variable Overhead Variances

Variable manufacturing overhead rate varianceVMRV = (AH × AR) – (AH × SR) = $100,000 – (88,000 hours × $1.00 per hour) = $12,000 unfavorable


Computing the Variable Overhead Variances

Variable manufacturing overhead efficiency varianceVMEV = (AH × SR) – (SH × SR) = $88,000 – (84,000 hours × $1.00 per hour) = $4,000 unfavorable


Computing the Sum of All Variances

Variable overhead rate variance 12,000$ U Variable overhead efficiency variance 4,000 U Fixed overhead budget variance 10,000 U Fixed overhead volume variance 18,000 U Total of the overhead variances 44,000$ U

Computing the Sum of All variancesColaCo


Journal Entries to Record Variances

Appendix 12B



(Appendix 12B)(Appendix 12B)

Prepare journal entriesPrepare journal entriesto record standardto record standard

costs and variances. costs and variances.


Appendix 12BJournal Entries to Record Variances

We will use information from the Glacier Peak Outfittersexample presented earlier in the chapter to illustrate journal

entries for standard cost variances. Recall the following:

Material

AQ × AP = $1,029AQ × SP = $1,050SQ × SP = $1,000MPV = $21 FMQV = $50 U

Material

AQ × AP = $1,029AQ × SP = $1,050SQ × SP = $1,000MPV = $21 FMQV = $50 U

Labor

AH × AR = $26,250AH × SR = $25,000SH × SR = $24,000LRV = $1,250 ULEV = $1,000 U

Labor

AH × AR = $26,250AH × SR = $25,000SH × SR = $24,000LRV = $1,250 ULEV = $1,000 U

Now, let’s prepare the entries to recordthe labor and material variances.


GENERAL JOURNAL Page 4

Date DescriptionPost. Ref. Debit Credit

Raw Materials 1,050

Materials Price Variance 21

Accounts Payable 1,029

To record the purchase of material

Work in Process 1,000

Materials Quantity Variance 50

Raw Materials 1,050

To record the use of material

Appendix 12BRecording Material Variances


GENERAL JOURNAL Page 4

Date DescriptionPost. Ref. Debit Credit

Work in Process 24,000

Labor Rate Variance 1,250

Labor Efficiency Variance 1,000

Wages Payable 26,250

To record direct labor

Appendix 12BRecording Labor Variances


Cost Flows in a Standard Cost System

Inventories are recorded at standard cost.

Variances are recorded as follows: Favorable variances are credits, representing

savings in production costs. Unfavorable variances are debits, representing

excess production costs.

Standard cost variances are usually closed out to cost of goods sold. Unfavorable variances increase cost of goods sold. Favorable variances decrease cost of goods sold.

Inventories are recorded at standard cost.

Variances are recorded as follows: Favorable variances are credits, representing

savings in production costs. Unfavorable variances are debits, representing

excess production costs.

Standard cost variances are usually closed out to cost of goods sold. Unfavorable variances increase cost of goods sold. Favorable variances decrease cost of goods sold.


End of Chapter 12

© 2012 mcgraw-hill education (asia) garrison, noreen, brewer, cheng & yuen standard costs and...

Documents