2016vtsgroup.com/ventus/ventus2016/brochure/brochure_ventus2016_… · 2016. reliable and tight...
TRANSCRIPT
STRUCTURE
AZ 150 ALUZINC SHEET
ALUMINIUM COLUMNS AS STANDARD FOR ALL TYPES
OF UNITS
3000
2500
2000
1500
1000
500
0
RESISTANCE TO CORROSION
Salt spray test according to ASTM B-117
VENTUS AHUnew coating resistance
Num
ber
of h
ours
VS 21-150
Z PROFILEVS 180-650
C PROFILE
GALVANIZED STEEL SUPPORT AS STANDARD FOR ALL TYPES
OF UNITS
CASING SKIN
» metal sheet thickness increased by 20% » increased rigidity and durability of the AHU structure
» low absorption of heat radiation and UV » increased resistance to weather conditions
FAN SECTION CAGE
» increased longitudinal stiffness of the structure
» easier sections assembly
FRAME
» easier transport » greater profile resistance to deflection
STRUCTURAL COLUMNS
» thermal breaks on the mullion as standard » high resistance to weather conditions and UV rays
Aluzinc20 Mu AZ150
Galvanised20 Mu Z275
162
2412
TIGHTNESS
SMART HINGE SYSTEM
VTS PATENTED PROPRIETARY
SOLUTION
INSPECTION PANELS EQUIPPED WITH THE OPEN / CLOSE SMART SYSTEM AND NEW PROTECTIVE CORNERS
» easy to use, enabling quick opening and closing of the inspection panel » smart hinge - prevents seal breaking when the panel is opened (VTS proprietary and patented solution) » improved ergonomics with an integrated handle and hinge function » reduced risk of panel damage
ALUMINIUM STRUCTURAL COLUMNS WITH AN ADDITIONAL SEALING FIN AND A THERMAL BREAK
» thermal breake as standard - ensures no condensation outside the AHU » the fin ensures labyrinth sealing - currently the most effective solution on the market, mainly used in laboratory equipment
» original solution consisting in the use of symmetrical channel tension filled with a sealing compound, which provides 100% tightness of the connection between the column and construction structure
THERMAL BREAK
ADDITIONAL COLUMN SEALING
ADDITIONAL SEALING
FINS
LABYRINTH SEALING
ULTRA+ SMART MAIN LX
SOURCE OF HEATING /COOLING
1 source • • • •2 sources • • •3 sources • •4 and more sources •
COMMUNICA-TION WITH MAS-TER SYSTEM
TCP/IP Modbus • •WebServer • •BacNET • •
FUNCTIONS
Dual methode of heating coil freeze protection (low limit thermostat on the air and water side) • • •Energy recovery systems frost protection (temperature sensor downstreem energy recovery section) • • •
Measurement and control of the constant air volume (CAV) • •Measurement and maintennance of air volume based on system required pressure (VAV) • •
Control of the concentration of carbon dioxide in the air • •Air humidity control • •Pre-heater control for extreme low temperatures (maximization of the energy recovery performance) •
CONTROLS
SOURCES OF HEATING/COOLING
» Primary heater
» Primary cooler
» The recovery (plate heat exchanger or a rotary exchanger, glycol system)
NEW RANGE OF CONTROLLERS
» Mixing box
» Primary heater (before recovery of heat), electric/water
» Reheat coil (mainly used for drying)
CO2
» automatic reduction of the amount of outside air (keeping the CO2 concentration below the set value)
» optimisation of consumption of heat and electricity
HUMIDITY CONTROL
» control over air humidifying - both evaporative and steam
» supports control the drying process
CONTROL OF VS21 – 150 BACKUP ENGINES
» adaptation to the special needs of the building
» protection in case of failure of the first engine
ELECTRIC HEATER CONTROL
» smooth control system that adjusts instantaneous power to the current demand
MIXING BOX CONTROL
» smooth control of the mixing box, external signal or as in the CO2 control function, etc.
» optimization of the ventilation air to save energy
NEW FEATURES
MEASUREMENT AND CONTROL OF THE CONSTANT AIR VOLUME
» adjustment of the preset constant air volume under changing flow resistance - compensation of changing internal resistance of the AHU (e.g. with varying degrees of air filter dirt, different setpoint of the mixing box, etc.)
» adjustment of the fan power to the current needs of the installation
» immediate readiness of the AHU to work with the required performance immediately after installation
CONSTANT PRESSURE CONTROL WITH VARIABLE AIR VOLUME
» control of constant, preset air pressure at variable volume (efficiency change is carried out through the air distribution system – e.g. VAV controllers)
MAIN and LX HMI
SMART HMI
REED SWITCH
» electronic stop of the motor when the panel is opened
FAN SAFETY BARRIER
» protection against fan in-operation
SAFETY OF USE
HANDLE OPEN PROTECTION
» increased safety against accidental opening of the fan section
PANEL CLOSED
Contact closed – fan start permitted
PANEL OPENED
Contact open – fan start prohibited
PLUG fan section
PLUG fan section
Contact
Reed switch
Contact
Reed switch
PLUG fan section
PLUG fan section
Contact
Reed switch
Contact
Reed switch
VTS Group HeadquartersVTS Sp. z o.o.
Olivia Tower, Al. Grunwaldzka 472 A80-309 Gdańsk, Poland
tel: +48 58 628 13 54fax: +48 58 628 13 22
e-mail: [email protected]
Contact