documentatie.smc.rodocumentatie.smc.ro/bp17vol/bp2004/14_4_ar.pdf · best pneumatics vol. 14 0 3...
TRANSCRIPT
Best Pneumatics Vol. 14
03
Series IR
Series IRV
Pressure Control Equipment� Regulators
Miniature Regulator: ARJ1020F/210/310 ······························· P. 14-4-4
Pilot Operated Regulator: AR425 to 925, AR435 to 935 ········ P. 14-4-15
Compact Manifold Regulator: ARM10/11 ································ P. 14-4-19
Manifold Regulator: ARM ························································ P. 14-4-52
Direct Operated Precision Regulator: ARP ····························· P. 14-4-59
Regulator for 2 MPa: ARX20 ··················································· P. 14-4-62
Precision Regulator: IR1000/2000/3000 ································· P. 14-5-1
Vacuum Regulator: IRV1000/2000/3000 ································· P. 14-5-17
Precision Regulator: VEX1�3 ··············································· P. 14-6-1
� Combination
MR Unit: AMR ········································································· P. 14-7-1
� New Function/Multi-application Valves
Compact Electro-pneumatic Regulator: ITV0000 ···················· P. 14-8-1
Electro-pneumatic Regulator: ITV1000/2000/3000 ················· P. 14-8-14
Electronic Vacuum Regulator: ITV209� ·································· P. 14-8-30
Controller for Electro-pneumatic Regulator: IC ························ P. 14-8-35
Booster Regulator: VBA ·························································· P. 14-9-1
Electro-pneumatic Proportional Control Valve: VEF/VEP ········ P. 14-9-11
5 Port Electro-pneumatic Proportional Control Valve: VER2000/4000 ···· P. 14-9-17
Power Amplifier for Electo-pneumatic Proportional Valve: VEA···· P. 14-9-24
Electro-pneumatic HYREG®: VY1 ············································ P. 14-10-1
14-4-1
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
14-4-2
RegulatorsSeries
Miniature regulatorARJ1020F
Direct operated relieving typeBack flow function
ManifoldM5 0.1 to 0.7
Miniature regulatorARJ210
Direct operated relieving type BracketPressure gauge
M5 to 0.2 to 0.7
Application/Characteristics Port size Set pressure (MPa) Option Page
18
18
Miniature regulatorARJ310
Small, compactAllows smaller mounting pitch
BracketPressure gauge
M5 0.2 to 0.71
8
to 214Pilot operated regulator
AR425-925AR435-935Compact manifold regulatorARM10/11
Internal pilot typeRelieving type
BracketPressure gauge
0.05 to 0.830.02 to 0.2
Manifold regulatorARM1000/2000
Manifold(Common IN/Individual IN)Direct operated relieving typeBack flow function
Pressure gauge0.08 to 0.7
to 1 21
8
to 1 21
8
, 38
14
, 14
18
Manifold regulatorARM2500/3000
Manifold(Common IN/Individual IN)Modular type
BracketPressure gauge
0.05 to 0.85
14Direct operated
precision regulatorARP3000
Setting sensitivity: 0.001 MPaDirect operated relieving type
BracketPressure gauge
0.005 to 0.3
Regulator for 2 MPaARX20
Compatible with inlet supply pressure of 2.0 MPa
BracketPressure gaugePanel nut
Standard type0.05 to 0.85 MPaLow pressure type0.05 to 0.3 MPa
Vacuum regulatorIRV1000/2000/3000
Able to adjust the pressure forvacuum line
BracketPressure gauge
–100 to –1.3 kPa
(IR1000/2000)0.005 to 0.20.005 to 0.40.005 to 0.8(IR3000)0.01 to 0.20.01 to 0.40.01 to 0.8
Precision regulatorIR1000/2000/3000
Tension controlContact pressure controlSetting sensitivity: 0.2% F.S.Repeatability: ±0.5% F.S.
BracketPressure gauge
Precision regulatorVEX1�3
Large capacity exhaustregulatorsSetting sensitivity: 0.2% F.S.Repeatability: ±0.5% F.S.
BracketFootPressure gaugeSilencer
14-4-4
14-4-6
14-4-11
14-4-15
14-4-19
14-4-52
14-4-55
14-4-59
14-4-61
14-5-15
14-5-1
14-6-1M5 to 2
0.01 to 0.70.05 to 0.71
830 /
/
/
/
/
/
/
/
/
/
/
/
/
/
Pressure Control Equipment
0.05 to 0.7Manifold
CombinationSeries Application/Characteristics Port size Set pressure (MPa) Option Page
New Function/Multi-application ValvesSeries Application/Characteristics Port size Set pressure (MPa) Option
MR unitAMR3000-6000
Mist seperator andregulator integratedFiltration: 0.3 µm
Adapter assemblyAuto-drainPressure gauge
0.05 to 0.85 14-7-1 to 1/14
Fil.
to 12
18
Electronic vacuum regulatorITV209�
–1.3 to –80 kPa 14-8-3014
Electro-pneumatic regulatorITV1000/2000/3000
Bracket0.005 to 0.10.005 to 0.50.005 to 0.9
14-8-14
Compact electro-pneumatic regulatorITV0000
BracketCable connectors
14-8-3
Controller for electro-pneumatic regulatorIC
Pressure gaugeSilencerAir tank
0.2 to 2.0 (VBA1110)0.2 to 1.0 (VBA4200)
14-9-1
ITV001�: 0.001 to 0.1 MPaITV003�: 0.001 to 0.5 MPaITV005�: 0.001 to 0.9 MPaITV009�: –1 to –100 kPa
0.1 to 0.9
to 1 21
4
Electro-pneumatic proportional valveVEF2000/3000VEP2000/3000
Dedicated power amplifier 14-9-11
Page
to 3 41
4
5 port electro-pneumatic proportional control valveVER2000/4000
Dedicated power amplifier 14-9-17 to 3 41
4
0.05 to supply pressureElectro-pneumatic HYREG®
Series VY1BracketPressure gaugeSilencer
14-10-1M5 to 2
For single unit ø4For manifolds ø6
/ /
/ /
/
/
/
/
/
Realizes space savings and re-duction of weight for manifold use.
Pressure controlled steplessly by electric signals Electrostatic paint-ing
Pressure controlled steplessly by electric signals
Pressure increased up to 2 times the inlet pressure
Pressure and flow rate controlled step-lessly by electric signalsPressure control for press die cushion, solvent bridge and low pressure castingMultistage speed control of air cylinders and rpm control of air motorsExclusive power amplifier
A single unit that actuates a cylinder and steplessly controls the applied pressureApplicable cylinders: ø25 to ø125Exhaust air throttling or B port pressure reduction possible
Pressure controlled steplessly by electric signalsCylinder thrust controlCylinder thrust control nozzle suc-tion flow control Pressure control of the tank
Booster regulatorVBA1110-4200
Panel mount adapter setDisplay protective cover
14-8-35M5 female(Built-in sensor type)
Converts digital input signal into analog output signal
14-4-3
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Flow rate (� /min (ANR)) Inlet pressure (MPa)
Initial set point
Miniature Regulator
Series ARJ1020FStandard Specifications
Model
Fluid
OUT side (Applicable tubing O.D.)
IN sidePortsize
Ambient and fluid temperature
Construction
Weight (kg)
Cracking pressure (Valve)
Applicable tubing material
Proof pressure
Maximum operating pressure
Regulating pressure range
ARJ1020F
Description
Manifold base
Part no.
ARJM10-4, -6, -10
M5ARJ 2010
Port size
Option
M5 M5 x 0.8
04
Applicable tubing O.D.04 4 mm06 6 mm
20 Elbow type
1 0.2 MPa setting
Body size
Miniatureregulator
Piping
10 M5
How to Order
Accessory (Option)/Part No.
Max. effective area (OUT � IN)
ø6ø4
0.0160.015
M5 (Male thread)
Air
1.2 MPa
0.02 MPa
1.8 mm2
0.8 MPa
0.1 to 0.7 MPa
0.2 MPa setting 0.05 to 0.2 MPa
–5 to 60°C (No freezing)
Relieving type
Nylon, Soft nylon, Polyurethane
1
With One-touch fitting
F
Note)
Note) Be sure to note the maximum operating pressure for soft nylon and polyurethane. (Refer to Best Pneumatics Vol. 15.)
Inlet pressure: 0.7 MPa
Pressure Characteristics
Flow Characteristics
Conditions (Initial setting)Inlet pressure: 0.7 MPa
Outlet pressure: 0.2 MPaFlow rate: 10 �/min (ANR)
ARJ1020F-M5-06ARJ1020F-M5-04
ARJM10-6
JIS Symbol
Note 1) Compared with standard specifications, its adjusting spring has only been changed. It is not the product which does not allow the pressure more than 0.2 MPa. Adjusting spring is not replaceable.
� Compact and lightweight (16 g)
� Low cracking pressure 0.02 MPaStandard model equipped with backflow function
14-4-4
Warning
Manifold Base (Option)/Dimensions
Component Parts
Dimensions
No. Description
B dimension
NoteBodyValve guidePistonBonnetHandleAdjusting springValveNipple
PBTBrass
Polyacetal BrassBrass
Steel wireBrassBrass
Electroless nickel plated
Electroless nickel platedElectroless nickel plated
Zinc chromatedRubber lining
Electroless nickel plated
Material
82122202
K
17.2
ARJM10-4ARJM10-6ARJM10-10
q
w
e
r
t
y
u
!0
Replacement PartsNo. Description Part no.
13434-30
P233014-04
134313
Valve
Gasket
Spring
Brass, HNBRStainless steel
NBRStainless steel
Materialu
i
o
A dimension
90130210
StationsManifold
base part no.
4 610
J
50
H
15.5
G
3.5
E
6
D
M5 x 0.8
F
10.6(Width across
flats: 10)
C4
6
B10.4
12.8
AModelARJ1020F-M5-04
ARJ1020F-M5-06
21
22
Piping
Mounting/Adjustment
Construction/Dimensions
1. Set up the regulator while verifying the pressure that is indicated on the inlet and the outlet pressure gauges. Turning the handle excessively could damage the internal parts.
1. Release the lock to adjust the pressure. After the adjustment, engage the lock. Failure to observe this procedure could damage the handle or cause the outlet pressure to fluctuate.<Lock operating method>Loosen the lock nut to unlock it, and tighten it to lock it.
2. This product cannot be used as a check regulator by installing it between solenoid valve and actuator.
Be sure to read before handling.Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions.
Lock nutM8 X 0.75
Panel screw
MAX. 2.5t
Applicable tubing O.D. C
Panel mounting hole31
(A
RJ1
020F
-M5-
04)
32 (
AR
J102
0F-M
5-06
)
(Mounting hole)
IN (Common)
Applicable tubing O.D. ø4, ø6
1. To connect the IN side, hold the valve guide at its wrench flats (opposite side 10) and tighten it at the recommended torque of 1.5 to 2 N·m. Excessive torque or holding it at an area other than the specified portion may result in a malfunction.
2. While piping to products or operating the handle, ensure that an excess bending moment should not be applied to a product, because it may result in damage.
∗ When replacing valves and springs, remove nipple first. Note that adhesive is applied to the nipple portion.
Precautions
Warning
Caution
2-ø3.5(Mounting hole)
14-4-5
Miniature Regulator Series ARJ1020F
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Flow rate (� /min (ANR)) Inlet pressure (MPa)
Initial set pointInitial set pointInitial set point
Standard SpecificationsModel
OUT side
IN side
Fluid
Port size
Pressure gauge port size
Ambient and fluid temperature
Weight (kg)
Proof pressure
Maximum operating pressure
Regulating pressure range
ARJ210-M5
1/8 (Male thread), M5 x 0.8 (Female thread)
M5 x 0.8 (Female thread 2 pcs.)
Bracket
Pressure gauge
134856
G27-10-M5-X201
M5ARJ 10 BG
Port size
Option
Accessory
M5IN
OUT M5 x 0.8 (Female thread)
(Male thread)M5 x 0.8 (Female thread)
Symbol DescriptionNilBG
With bracketWith pressure gauge
1 Relieving type (Standard)
1 0.2 MPa setingS With seal
Body size
Miniatureregulator
Model
Air
How to Order
Accessory (Option)/Part No.
1.2 MPa
0.8 MPa
0.2 to 0.7 MPa
0.2 MPa setting 0.05 to 0.2 MPa
0.06
M5 x 0.8 (Female thread)
–5 to 60°C (No freezing)
12
ARJ210-M5BG
ARJ210-M5
1 8
Note)
Miniature Regulator
Series ARJ210
JIS Symbol
Pressure Characteristics
Flow Characteristics Inlet pressure: 0.7 MPa
(Initial setting)Inlet pressure: 0.7 MPa
Outlet pressure: 0.2 MPaFlow rate: 20 � /min (ANR)
Note) If ordering the pressure gauge, M-5N (nipple) is required. Part number of the pressure gauge with a nipple assembled is G27-10-M5-X215.
Note 1) Compared with standard specifications, its adjusting spring has only been changed. It is not the product which does not allow the pressure more than 0.2 MPa. Adjusting spring is not replaceable.
� Lightweight body made of aluminum (60 g)
� Two styles of piping connections provided for the IN side: 1/8 (male thread) and M5 (female thread)
14-4-6
21 (W
idth a
cross
flats)
Lock nut
Panel mounting hole
Bracket(Option)
Pressure gauge(Option) M5 x 0.8
2-M5 x 0.8
M12 x 1
≅37
Max. 4t
Selection
Warning
Construction/Dimensions
No. DescriptionBodyValve guidePistonAdjusting screwAdjusting spring
Electroless nickel platedBlack anodized
Note
Electroless nickel platedZinc chromated
BrassBrass
Aluminum alloyMaterial
BrassSteel wire
q
w
e
r
t
Mounting/Adjustment
1. This product cannot be used as a check regulator by installing it between solenoid valve and actuator. Doing so could lead to equipment damage.
2. When connecting a pipe to the IN side, hold the valve guide at its wrench flats (opposite side 11), and when connecting to the OUT side, hold the body at its hexagon portion and tighten it to the recommended torque. (M5: 1.5 to 2 N·m, R 1/8: 7 to 9 N·m.) Excessive torque or holding it other than at the specified area could lead to equipment damage.
1. Set up the regulator while verifying the pressure that is indicated on the inlet and the outlet pressure gauges. Turning the handle excessively could damage the internal parts.
1. Release the lock to adjust the pressure. After the adjustment, engage the lock.Failure to observe this procedure could damage the handle or cause the outlet pressure to fluctuate.<Lock operating method>Loosen the lock nut to unlock it, and tighten it to lock it.
2. This product cannot be used as a check regulator by installing it between solenoid valve and actuator.
3. Port with a pressure gauge or a plug can be used as an OUT port.
Be sure to read before handling.Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions.
Precautions
Warning
Caution
View A
14-4-7
Miniature Regulator Series ARJ210
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Compact and lightweight (Main body 65 g)
Allows smaller mounting pitch
18.3
≅ 41
18.8 mm
Panel mounting type One-touch fitting featureintroduced to seriesø4, ø6 (Metric size)ø5/32", ø1/4" (Inch size)
Accommodates two types of threadsInside: Female thread (M5 x 0.8)Outside: Male thread (1/8)
Improved flow characteristics
Flow rate (� /min (ANR))
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 100 200 300 400 500
Out
let p
ress
ure
(MP
a)
ARJ210-M5
Inlet pressure: 0.7 MPaInlet pressure: 0.7 MPa
ARJ310-01
ARJ310-01G
≅ 82
.5
Miniature Regulator
Series ARJ310
14-4-9
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
To set the correct pressure1. Make connections after confirming the mark which indicates
the air inlet. Reversed connections can cause malfunction.
1. This product cannot be used as a check regulator by installing it between solenoid valve and actuator. It can result in causing breakdown and malfunction.
2. When piping, tighten the regulator with the recommended proper tightening torque (M5: 1.5 to 2 N·m, R 1/8: 7 to 9 N·m) while holding the wrench flats (width 11) of the valve guide for IN port and holding the hexagonal section of the body for the OUT port. Excessive tightening or holding a part other than those specified can cause damage.
3. While piping to products or operating the handle, ensure that an excess bending moment should not be applied to a product, because it may result in damage.
Warning
Precautions
Design and Selection Mounting
Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions.
Caution
Series ARJ310
14-4-10
How to Order
1/8 (Male thread), M5 x 0.8 (Female thread)01
Port size (IN)R, RcNPT
NilN
Thread type
NoneBracket
Pressure gauge
NilBG
Accessory
Relieving type10
ARJ 3 10 F BGWith One-touch fitting 0401
ARJ 3 10 01
Body size
With One-touch fitting
Model
0.7 MPa setting (Standard)0.2 MPa setting (1)
With seal
Nil1S
Option
ARJ310-014 mm6 mm
0406
Applicable tubing O.D. (OUT)Metric size
1/8 (Male thread), M5 x 0.8 (Female thread)1/8 (Female thread)
INOUT
01
Port size (IN, OUT)
ARJ310F-N015/32"1/4"
0307
Inch size
BG
Standard Specifications
Rc 1/8, NPT 1/8 (Female thread)Air
1.2 MPa0.8 MPa
Standard: 0.2 to 0.7 MPa, Low pressure use (0.2 MPa setting): 0.05 to 0.2 MPa
–5 to 60°C (With no freezing)Approx. 65 g
Pressure gauge port sizeFluidProof pressureMaximum operating pressure
Regulating pressure range
Ambient and operating temperature rangeWeight
Accessory (Option) Part No.
134856
G15-10-01 (Rc 1/8)/G15-P10-N01 (NPT 1/8)Bracket
Pressure gauge Note)
Note) Pressure gauges (G15) for 0.2 MPa are not available.
JIS Symbol
Model
Port sizeIN ∗
R 1/8, M5 x 0.8
NPT 1/8, M5 x 0.8
R 1/8, M5 x 0.8
NPT 1/8, M5 x 0.8
OUT
Rc 1/8
NPT 1/8
ø4 One-touch fitting
ø6 One-touch fitting
ø5/32" One-touch fitting
ø1/4" One-touch fitting
ARJ310-01ARJ310-N01ARJ310F-01-04ARJ310F-01-06ARJ310F-N01-03ARJ310F-N01-07
Model
∗ M5 x 0.8 female thread is cut inside the pipe.
Note 1) Compared with standard specifications, its adjusting spring has been only changed for 0.2 MPa. It is not the product which does not allow the pressure more than 0.2 MPa. Adjusting spring is not replaceable. Besides, in the case with the pressure gauge, the pressure gauge will be the one for 1 MPa.
Note 2) For products with pressure gauge, pressure gauge is shipped together with product.
Miniature Regulator
Series ARJ310
14-4-11
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Flow Characteristics
Pressure Characteristics
Construction
ARJ310-01
ARJ310-01 ARJF310F-01
ARJ310F-01-04 ARJ310F-01-06
Flow rate (� /min (ANR))
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 100 200 300 400 500 600
Out
let p
ress
ure
(MP
a)
Flow rate (� /min (ANR))
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 100 200 300 400 500 600
Out
let p
ress
ure
(MP
a)
Flow rate (� /min (ANR))
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 100 200 300 400 500 600
Out
let p
ress
ure
(MP
a)
0.10
0.15
0.20
0.25
0.30
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
Out
let p
ress
ure
(MP
a)
Inlet pressure (MPa)
Conditions:Inlet pressure 0.7 MPaOutlet pressure 0.2 MPaFlow rate Q = 20 �/min (ANR)
Inlet pressure: 0.7 MPa
ye
!1
q
o
r
!2
!6
i
!5
u
!4
!7
!3
!0
t
w
OUT
IN
No.q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
!7
DescriptionBodyValve guideBonnetPistonValveAdjusting screwPanel nutHexagon nutAdjusting springValve springSpring holderMini Y-sealO-ringLock washerBracketPressure gaugeCassette
Aluminum alloyBrassBrassPOMBrassBrassBrassBrass
Steel wireStainless steel
Steel bandNBRNBRSS
Steel band—
POM, Stainless steel
Material Note
Component Parts
Electroless nickel platedElectroless nickel plated
Rubber lining material: HNBRElectroless nickel platedElectroless nickel platedElectroless nickel plated
Zinc chromated
Zinc chromated
Electroless nickel platedAccessoryAccessory
Black zinc chromated
Set pointSet point
Series ARJ310
14-4-12
Dimensions
192
(Width across flats)11
18.3
32
≅27
≅82.
5
≅57.
28.
5
26
22 M12 x 1Panel cutout dimensions
ø12.5/Panel thickness: 4 or less
2-ø5.5
Port sizeRc, NPT 1/8
Applicable tubing O.D.Metric size ø4, ø6Inch size ø5/32", ø1/4"
M5 x 0.8 (Female thread)
13.6
1
2
1
2
26.1
R, NPT 1/8
Pressure gaugeport sizeRc, NPT 1/8
26.1 ≅3
15
≅31
≅56
≅35
≅56
ARJ310-01 ARJ310F-01
14-4-13
Miniature Regulator Series ARJ310
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Pilot Operated Regulator
Series AR425 to 935
Regulatingpressure range
How to Order
Model
Port size
Fluid
Proof pressure
Max. operating pressure
Set pressure range (MPa)
Air consumption (for bleed hole)
Pressure gauge port size
Ambient and fluid temperature
Construction
Weight (kg)
AR425 AR435 AR625 AR635 AR825 AR835 AR925 AR935
Air
1.5 MPa
1.0 MPa
5 l/min (ANR) (at maximum pressure)
–5 to 60°C (No freezing)
Internal pilot relieving type (Pilot air is always bleeding.)
4.52.51.10.7
Accessory (Option)/Part No.Part no.
AR4�5 AR6�5 AR8�5 AR9�5Description Model
Bracket
Pressure gauge with limit indicator (1)
B24P B25P — —
G46-10-�02 (Max. 1.0 MPa), G46-2-�02 (Max. 0.2 MPa)
(2)
(1)
Note 1) • In the gauge part no. (e.g. G46-10-�02), � indicate kind of the connecting thread. Put nothing for Rc and “N” for NPT thread.• Please consult with SMC for NPT pressure gauge.
Note 2) Use caution not to tighten excessively when mounting a pressure gauge, otherwise it may result in a breakdown. Use a pipe tape for sealing. Recommended torque: 12 to 14 N·m.
1/4, 3/8, 1/2 3/4, 1 1 , 1 241
41
21
0.05 to 0.83 0.02 to 0.2 0.05 to 0.83 0.02 to 0.2 0.05 to 0.83 0.02 to 0.2 0.05 to 0.83 0.02 to 0.2
Internal pilot operated relieving type regulator
AR 254 BG R02
Regulator
Body size
Thread type
Port size
Accessory
Nil
G
Gau
ge
Description Applicable model
With bracket AR4�5 to 6�5AR�25AR�35
21
21
41
B
Symbol1
2
1
2
G46-10-02G46-2-02
OptionNil
Flow direction: Right � Left
None
R
AR8�5 AR6�5
AR425-��BGAR6�5-��BG
Standard Specifications
4689
1
NilNF
RcNPT
G
2535
0.05 to 0.83 MPa
0203040610121420
1 4
83
1 23 4
11 21
Note) 0.02 to 0.2 MPaNote 1) Compared with AR�25
type, its adjusting spring will only be different.
Note 2) Compared with AR�25 type, its adjusting spring will only be changed for 0.2 MPa. It is not the product which does not allow the pressure more than 0.2 MPa.
JIS Symbol
Note 1) Outlet pressure range: P2 is 90% of P1 or less. Note 2) Air consumption differs depending on the set pressure. Due to the construction, the pressure gap between inlet and outlet cannot be set within 0.03 MPa, even if the handle is set at the maximum.
∗ Pressure gauges are shipped with regulator, (but not assembled).
14-4-15
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Flow rate (�/min (ANR)) Flow rate (�/min (ANR)) Inlet pressure (MPa)
Flow rate (�/min (ANR)) Flow rate (�/min (ANR)) Inlet pressure (MPa)
Flow rate (�/min (ANR)) Flow rate (�/min (ANR)) Inlet pressure (MPa)
Flow rate (�/min (ANR)) Flow rate (�/min (ANR)) Inlet pressure (MPa)
Set pointSet point
Set pointSet point
Set pointSet point
Set pointSet point
AR425 AR435 AR425/435
AR625 AR635 AR625/635
AR825 AR835 AR825/835
AR925 AR935 AR925/935
Flow Characteristics PressureCharacteristics
Inlet pressure: 0.7 MPa Inlet pressure: 0.7 MPaOutlet pressure: 0.2 MPaFlow rate: 20 � /min (ANR)
Series AR425 to 935
14-4-16
Warning
No.
No.
Description Material Note
Description MaterialPart no.
BodyBonnetChamberValve guide
q
w
e
r
t!1
y
u
o
!0
Replacement Parts
Stainless steelABS
Steel wire
AR425, 435132586A132581A132572A
135211
AR625, 635132586A132659A132653A
13265613414
Aluminum die-casted ∗Aluminum die-castedAluminum die-casted
Zinc die-casted ∗
Platinum silver paintedPlatinum silver paintedPlatinum silver paintedPlatinum silver painted
∗ In the case of AR825/835/925/935, the material is aluminum alloy.
Note) Diaphragm is included.
∗ For products with pressure gauge, pressure gauges are shipped together with product.
Component Parts
Adjusting springi135053 (AR425)135025 (AR435)
135053 (AR625)135025 (AR635)
AR825, 835132586A13275A
132752A
132713
135053 (AR825)135025 (AR835)
AR925, 935132586A13285A
132829A
13289
135053 (AR925)135025 (AR935)
Dimensions
Construction
A B C D E FG H J
Bracket dimensions
AR425/435AR625/635AR825/835AR925/935
80 98126160
145.5155216241
39.5437590
67 78110140
73 78.5 94.5 109.5
3 7 510
46.585
4852
8090
B24PB25P
Bracket partno.
Pressure gauge port sizePort sizeModel
1/4, 3/8, 1/23/4, 1
1 1/4, 1 1/22
1/41/41/41/4
AR425/435AR625/635
AR825/835AR925/935
Mounting/Adjustment
Exhaust valve assembly Note)
Main valve side diaphragm assemblyValve assembly
Valve springHandle
1. Release the lock to adjust the pressure. After the adjustment, engage the lock. Failure to observe this procedure could damage the handle or cause the outlet pressure to fluctuate.<Lock operating method>Loosen the handle locking screw to unlock it, and tighten it to lock it.
2. Please contact SMC if this product is to be used between solenoid valve and actuator.
1. Install the valve guide (on the opposite side of the handle) 60 mm away from the ground surface to facil i tate maintenance inspection.
2. Do not use the regulator with flow exceeding the Max. flow indicated in “Flow Characteristics” as this can cause failure in pressure adjustment.
Be sure to read before handling.Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions.
Relief port
Bleed port
Handle locking screw
Pressure gauge port size Pressure gauge port sizePressure gauge
(Option)
Port size
Bracket(Option)
Pressure gauge
(Option)
Port size
When handle !0 is turned clockwise to compress pressure adjustment spring i, the pressure from the IN side passes through diaphragm !1, opens pilot valve !2, and enters upper pilot chamber !3. This pressure and the force generated by pressure adjustment spring i act as resistance, resulting in equilibrium. Then, this pressure passes through diaphragm y of the main valve and stem !4, and pushes valve (main valve) u open, thus guiding the pressure to the OUT side. At the same time, the pressure passes through feedback hole !5, and enters diaphragm chamber !6, thus establishing the OUT side pressure (outlet pressure).
Precautions
Caution
14-4-17
Pilot Operated Regulator Series AR425 to 935
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Individual supply
Common supply
Common supply Individual supply Single unit Front handle
KCOLHSUP
SMC
KCOLHSUP
SMC
SMCSMC
KCOLHSUP
SMC
SMC
Upper space is limited.
KCOLHSUP
SMC
KCOLHSUP
SMC
0.5
0.10.3
IS1000MPa
0.6
0.20.4
SMCMADE IN JAPAN
SMCSMC
KCOLHSUP
SMC
SMC
Lower space is limited.
Front handle/Bottom ported Front handle/Top ported
• Handle position: Top, Front, Bottom• Piping direction: Top ported, Bottom ported• One-touch fitting types: Straight, Elbow
IN side
OUT side
Straight, Elbow
Straight, Elbow
4 6 8 10
Applicable tubing O.D. (mm)Fitting type
Also available in inch sizes.
Installation example
IN side
OUT side
Common exhaust type and individual exhaust type can be mounted on the same manifold base.(Available as Simple Specials)
Opening and closing lens cover makes adjustment easy.
Reverse flow function is equipped as a standard.Reverse flow function is equipped as a standard.Can control thrust of the actuator.
The mounting position of the supply block can be selected from the right, left and both sides of the manifold.
Example of panel mounting
Manifold type Single unit type
Front handle type is newly added to the single unit specifications.
With 3-way pressurerelief valve
With pressure switchWith 3-way pressure reliefvalve + Pressure switch
Supply block
Allows high degree of freedom in selection according to the installation conditions.Allows high degree of freedom in selection according to the installation conditions. Four types of supply blocks (for common supply)Four types of supply blocks (for common supply)
Types and sizes of the One-touch fittings can be changed.Types and sizes of the One-touch fittings can be changed.
Mixed manifoldMixed manifold
Pressure gauge with limit indicator.Pressure gauge with limit indicator.
Compact Manifold Regulator
Series ARM10/11
14-4-19
How to Order
ARM11A 1A 1 A Z107
ABC
Top
Front
Bottom
Inch size123456789M
1 station
2 stations
3 stations
4 stations
5 stations
6 stations
7 stations
8 stations
9 stations
10 stations
2. IN/OUT piping position
Symbol
1234
IN side
Bottom
••
Top
••
Bottom
•
•
Top
••
OUT side
Symbol
575859606162697071727374767778798081838485868788
IN side
Straight
ø1/4
••
••
ø5/16
••
••
ø3/8
••
••
ø5/16
••
••
ø1/4
••
••
ø3/8
••
••
ø5/32
•••
•••
ø1/4
•••
•••
ø5/32
••••••
ø1/4
••••••
Elbow Straight Elbow
OUT side
Note) When the handle and the OUT piping are located on the same side, the elbow fitting is directed to the rear side (DIN rail side).
Handle position: TopOUT piping position: Top
Handle position: BottomOUT piping position: Bottom
Front side(Pressure
gauge side)
Rear side(DIN rail side)
Front side(Pressure
gauge side)
Rear side(DIN rail side)
Symbol
070809101112192021222324262728293031333435363738
IN side
Straight
ø6
••
••
ø8
••
••
ø10
••
••
ø8
••
••
ø6
••
••
ø10
••
••
ø4
•••
•••
ø6
•••
•••
ø4
••••••
ø6
••••••
Elbow Straight Elbow
OUT sideNote)
1 2 3 4 5 6 7
FrontTopTop
Bottom IN side fittingElbow
OUT side fittingElbow
IN side fittingStraight
OUT side fittingStraight
1. Handle position
3. Regulator block stations 4. IN/OUT fitting type (Refer to the figure below.)
Metric size
Bottom
Top
Bottom
Compact Manifold Regulator Common Supply Type
Series ARM11A
14-4-20
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Specifications
Electric Circuit
Set Pressure Range
Manifold (Regulator block, Common supply block, 3-way valve common supply block)
Direct acting
Diaphragm regulator
Relief type
Non-relieving type
Within (Unbalance type)
ø6, ø8, ø10, ø1/4, ø5/16, ø3/8
ø4, ø6, ø5/32, ø1/4
1.5 MPa
1.0 MPa
0.05 to 0.7 MPa
0.05 to 0.35 MPa (Low pressure type)
Air
5 to 60°C
Regulator construction
Working principal
Relief mechanism
Backflow function
IN side tubing O.D.
OUT side tubing O.D.
Proof pressure
Maximum operating pressure
Set pressure range
Fluid
Ambient and fluid temperature
Standard
Optional
Standard
Optional
Pressure switch (Common supply block with pressure switch, 3-way valve common supply block + Pressure switch block)
Reed switch mechanism
Reed switch mechanism
1a
Piston mechanism (with magnet installed)
Grommet type
0.5 m
1.0 MPa
0.7 MPa
0.1 to 0.6 MPa
0.08 MPa
±0.05 MPa
Air
–5 to 60°C
AC 2 VA, DC 2 W
48 V
40 mA
30 G
Contact mechanism
Contact structure
Contact configuration
Reed switch operating mechanism
Wiring specifications
Wiring length
Proof pressure
Maximum operating pressure
Set pressure range
Hysteresis
Repeatability
Fluid
Ambient and fluid temperature
Maximum switching capacity
Operating voltage AC/DC
Maximum operating current and range
Impact resistance
24 V or less
50 mA
100 V
20 mA
Up to 100 VAC/VDC
0
0.1
0.2
0.3
0.5
0.4
0.1 0.2 0.3 0.4Pressure setting scale
Ope
ratin
g pr
essu
re M
Pa
Hys
tere
sis
ON pressure OFF pressure
Common supply block Common supply blockwith pressure switch
3-way valve commonsupply block
3-way valve commonsupply block
+Pressure switch block
L side L side
L side L side
Note) When the regulator is used with backflow, operate at a set pressure of 0.1 MPa or above.
5. Accessory
Symbol
NilABCDEFGHJKLMNOPQR
••••••••• •••••••••
•
•
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
••••
••••
••••
••••
•
•
Pressure gauge
NoneWith
pressuregauge
Commonsupplyblock
Commonsupply
block withpressureswitch
3-wayvalve
commonsupplyblock
3-way valvecommon
supply block
Pressureswitchblock
L side(Left)
R side(Right)
B side(Both)
Supply block type Supply block mounting position
+
Symbol
Nil1234567
None
•0.35 MPa
setting Note 1)
•
•••
Note 2)Non-relieving
••••
Oil-free
••••
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.Note 2) The oil-free type has non-greased fluid contact areas.
6. Option
7. Unit representation
Symbol
NilZ Note)
DescriptionDisplay unit for product name plate and pressure gauge: MPa
Display unit for product name plate and pressure gauge: PSI
Note) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.) The pressure switch offers dual unit representation in MPa and PSI.
JIS Symbol
IN
OUT
OUT
Lead
sw
itch
Note 1) Pressure gauges are not available with the copper-free specification.
Note 2) The oil-free specification is not available for pressure switches.
14-4-21
Series ARM11ACompact Manifold RegulatorCommon Supply Type
Flow Characteristics
ARM11AA1-307 (One-touch fittings: IN ø6, OUT ø4) ARM11AA1-307-1 (One-touch fittings: IN ø6, OUT ø4)
Pressure Characteristics
ARM11AA1-307-1ARM11AA1-307
ARM11AA1-310 (One-touch fittings: IN ø8, OUT ø6) ARM11AA1-310-1 (One-touch fittings: IN ø8, OUT ø6)
ARM11AA1-312 (One-touch fittings: IN ø10, OUT ø6) ARM11AA1-312-1 (One-touch fittings: IN ø10, OUT ø6)
0
0.1
0.2
0.3
0.4
0.5
0.60.7
0 50 100 150
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.000 20 40 60 80 100
0
0.1
0.2
0.3
0.4
0.5
0.60.7
0 50 100 150 200 250 3000.00
0.05
0.10
0.15
0.20
0.25
0.300.35
0 50 100 150 200
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 50 100 150 200 250 3000.00
0.05
0.10
0.15
0.20
0.25
0.300.35
0 50 100 150 200
0.10
0.15
0.20
0.25
0.30
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.00.10
0.15
0.20
0.25
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Conditions: Inlet pressure 0.5MPaOutlet pressure 0.2MPaFlow rate 20�/min (ANR)
Conditions: Inlet pressure 0.7MPaOutlet pressure 0.2MPaFlow rate 20�/min (ANR)
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Flow rate �/min(ANR) Flow rate �/min(ANR)
Flow rate �/min(ANR) Flow rate �/min(ANR)
Flow rate �/min(ANR) Flow rate �/min(ANR)
Inlet pressure MPa Inlet pressure MPa
Set point
Set point
14-4-22
Series ARM11A
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Construction
Body for regulator block
Bonnet
Handle
Valve seat
Adjusting screw assembly
Adjustment spring
Regulator clip
Manifold block
Blanking plate assembly
Square nut
Common exhaust bushing
No. Material
PBT
PBT
POM
POM
Reinforced steel
Steel wire
Stainless steel
PBT
—
Steel
POM
Component Parts
Diaphragm assembly
Valve
Valve spring
Gasket
O-ring
O-ring
O-ring
O-ring
Fitting assembly
Port plug
No. Material
Weatherproof NBR, POM
HNBR, Aluminum alloy
Stainless steel
HNBR
NBR
NBR
NBR
NBR
—
PBT/HNBR
Part no.
136126A
136127-30
136131
136137-30
136146
136147
136148
136149
Refer to page 14-4-37.
Refer to page 14-4-38.
Replacement Parts
A-AA
OUTIN
KCOLHSUP
SMC
SMC
K
A
11
J
H
3
6
4
F
E
B
1
C
G
9
10
5
2
A
8
D
7
Description Description
q
w
e
r
t
y
u
i
o
!0
!1
��
��
��
��
��
��
��
�
�
�
14-4-23
Series ARM11ACompact Manifold RegulatorCommon Supply Type
Dimensions
ARM11AA1-�12Handle position: Top/Common supply block
ARM11AA1-�12-AHandle position: Top/Common supply block with pressure switch
5333
.5
14
5718
L2
611.58
5.3
84
56
52.539
L2-10.5
5.5
L1=(28 x n)+5618 20 2828
53
14
33.5
18L2
11.5 6
5.3
84
2828
52.5393
5
28
L2-10.55.
5
8
L1=(28 x n)+5618 20 28
SMC
OUTINOUTIN
SMCSMC
0.50.10.3
MPa
0.60.20.4
IN
SMC
OUTININ OUTIN
SMC
SMC SMC
DIN rail part no. (for L and R sides)
AXT100-DR-9
AXT100-DR-11
AXT100-DR-13
AXT100-DR-16
AXT100-DR-18
AXT100-DR-20
AXT100-DR-22
AXT100-DR-25
AXT100-DR-27
AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
DIN rail part no. (for L and R sides)
AXT100-DR-9 AXT100-DR-11AXT100-DR-13AXT100-DR-16AXT100-DR-18AXT100-DR-20AXT100-DR-22AXT100-DR-25AXT100-DR-27AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
For the dimensions of One-touch fittings and manifold options, please refer to pages 14-4-34 to 14-4-38.
3935
35
14-4-24
Series ARM11A
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
ARM11AA1-�12-BHandle position: Top/3-way valve common supply block
ARM11AA1-�12-CHandle position: Top/3-way valve common supply block + Pressure switch block
DIN rail part no. (for L and R sides)
AXT100-DR-9 AXT100-DR-11AXT100-DR-13AXT100-DR-16AXT100-DR-18AXT100-DR-20AXT100-DR-22AXT100-DR-25AXT100-DR-27AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
DIN rail part no.
AXT100-DR-11AXT100-DR-13AXT100-DR-15AXT100-DR-17AXT100-DR-19AXT100-DR-22AXT100-DR-24AXT100-DR-26AXT100-DR-28AXT100-DR-31
Stations
123456789M
L2 dimension
148
173
198
223
248
285.5
310.5
335.5
360.5
398
14
535133
.518
6
3
11.5
L2
5.3
84
56
52.539
2218
L2-10.55.
5
8
L1=(28 x n)+582828
IN
SM
C
OUTIN
SMC
OUTIN
SMC
5333
.5
14
57 5118
3611.5
L2
5.3
84
56
52.539
202218
L2-10.5
5.5
8
L1=(28 x n)+782828
IN
SM
C
0.50.10.3
MPa
0.60.20.4
OUTINOUTIN
SMC SMC
For the dimensions of One-touch fittings and manifold options, please refer to pages 14-4-34 to 14-4-38.
35
35
35
28
28
14-4-25
Series ARM11ACompact Manifold RegulatorCommon Supply Type
35
35
Dimensions
ARM11AB1-�12Handle position: Front/Common supply block
ARM11AB1-�12-AHandle position: Front/Common supply block with pressure switch
DIN rail part no.
AXT100-DR-9 AXT100-DR-11AXT100-DR-13AXT100-DR-16AXT100-DR-18AXT100-DR-20AXT100-DR-22AXT100-DR-25AXT100-DR-27AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
DIN rail part no.
AXT100-DR-9 AXT100-DR-11AXT100-DR-13AXT100-DR-16AXT100-DR-18AXT100-DR-20AXT100-DR-22AXT100-DR-25AXT100-DR-27AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
18 14 33.5
L2
11.5
5.3
2856
52.581
28
L2-10.5
5.5
8
L1=(28 x n)+5618 20 28
KCOLHSUP
SMC
KCOLHSUP
SMC
OUT IN OUT INS
MC
SMC
IN
SMC
SMC
14
81
33.5
5718
L2
11.5
5.3
28
52.5
56
28
L2-10.5
5.5
8
L1=(28 x n)+5618 20 28
KCOLHSUP
SMC
KCOLHSUP
SMC
OUT IN OUT IN
SMC
SM
C
0.50.10.3
0.60.20.4
SMC
IN
For the dimensions of One-touch fittings and manifold options, please refer to pages 14-4-34 to 14-4-38.
53
14-4-26
Series ARM11A
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
ARM11AB1-�12-BHandle position: Front/3-way valve common supply block
ARM11AB1-�12-CHandle position: Front/3-way valve common supply block + Pressure switch block
DIN rail part no.
AXT100-DR-9 AXT100-DR-11AXT100-DR-13AXT100-DR-16AXT100-DR-18AXT100-DR-20AXT100-DR-22AXT100-DR-25AXT100-DR-27AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
DIN rail part no.
AXT100-DR-11AXT100-DR-13AXT100-DR-15AXT100-DR-17AXT100-DR-19AXT100-DR-22AXT100-DR-24AXT100-DR-26AXT100-DR-28AXT100-DR-31
Stations
123456789M
L2 dimension
148
173
198
223
248
285.5
310.5
335.5
360.5
398
14
33.5
5118
L2
11.5
5.3
5628
52.581
28 2822
L2-10.5
5.5
8
L1=(28 x n)+5818
KCOLHSUP
SMC
KCOLHSUP
SMC
IN
SM
C
OUT IN OUT IN
SMCSMC
57 5118 14
33.5
L2
11.5
5.3
28
52.581
56
2218 28
L2-10.5
5.5
8
L1=(28 x n)+7820 28
KCOLHSUP
SMC
KCOLHSUP
SMC
SM
C
IN OUT INOUT IN
0.5
0.10.3
MPa
0.6
0.20.4
SMCSMC
For the dimensions of One-touch fittings and manifold options, please refer to pages 14-4-34 to 14-4-38.
35
35
14-4-27
Series ARM11ACompact Manifold RegulatorCommon Supply Type
Dimensions
ARM11AC2-�12Handle position: Bottom/Common supply block
ARM11AC2-�12-AHandle position: Bottom/Common supply block with pressure switch
DIN rail part no.
AXT100-DR-9 AXT100-DR-11AXT100-DR-13AXT100-DR-16AXT100-DR-18AXT100-DR-20AXT100-DR-22AXT100-DR-25AXT100-DR-27AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
DIN rail part no.
AXT100-DR-9 AXT100-DR-11AXT100-DR-13AXT100-DR-16AXT100-DR-18AXT100-DR-20AXT100-DR-22AXT100-DR-25AXT100-DR-27AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
5333
.518
14
11.5
L2
5.3
84
56
52.5392828
L2-10.55.
5
8
L1=(28 x n)+5618 20
SM
C
OUT IN
KCOLHSUP
SMC
OUT IN
KCOLHSUP
SMC
SMC
IN
SMC
SMC
5718
5333
.5
14
11.5
L2
5.3
84
56
52.539
L2-10.5
5.5
8
L1=(28 x n)+5618 20 2828
SM
C
OUT IN
KCOLHSUP
SMC
OUT IN
KCOLHSUP
SMC
SMCSMC
0.5
0.10.3
MPa
0.6
0.20.4
IN
For the dimensions of One-touch fittings and manifold options, please refer to pages 14-4-34 to 14-4-38.
28
28
3 53 5
14-4-28
Series ARM11A
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
14-4-29
Series ARM11ACompact Manifold RegulatorCommon Supply Type
ARM11AC2-�12-BHandle position: Bottom/3-way valve common supply block
ARM11AC2-�12-CHandle position: Bottom/3-way valve common supply block + Pressure switch block
DIN rail part no.
AXT100-DR-9 AXT100-DR-11AXT100-DR-13AXT100-DR-16AXT100-DR-18AXT100-DR-20AXT100-DR-22AXT100-DR-25AXT100-DR-27AXT100-DR-29
Stations
123456789M
L2 dimension
123
148
173
210.5
235.5
260.5
285.5
323
348
373
DIN rail part no.
AXT100-DR-11AXT100-DR-13AXT100-DR-15AXT100-DR-17AXT100-DR-19AXT100-DR-22AXT100-DR-24AXT100-DR-26AXT100-DR-28AXT100-DR-31
Stations
123456789M
L2 dimension
148
173
198
223
248
285.5
310.5
335.5
360.5
398
5118
5333
.5
14
L2
11.5
5.3
84
56
28
52.5392218
L2-10.55.
5
8
L1=(28 x n)+582828
IN
SM
C
OUT IN
KCOLHSUP
SMC
OUT IN
KCOLHSUP
SMC
SMCSMC
8
57 5118
5333
.5
14
L2
11.5
5.3
84
56
52.539
202218
L2-10.5
5.5
L1=(28 x n)+782828
IN
SM
C
OUT IN
KCOLHSUP
SMC
OUT IN
KCOLHSUP
SMC
0.5
0.10.3
MPa
0.6
0.20.4
SMCSMC
For the dimensions of One-touch fittings and manifold options, please refer to pages 14-4-34 to 14-4-38.
28
3 53 5
How to Order
JIS Symbol
ARM11B 1A 1 1 Z
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.Note 2) The oil-free type has non-greased fluid contact areas.
06
1. Handle position
6. Option
5. Accessory
3. Regulator block stations
4. IN/OUT fitting type
Metric size
123456789M
1 station
2 stations
3 stations
4 stations
5 stations
6 stations
7 stations
8 stations
9 stations
10 stations
2. IN/OUT piping position
Symbol
565758686970757677828384
IN side
ø5/32
•
•
ø1/4
••
••
ø5/32
•
•
ø5/32
••
••
ø1/4
••
••
ø1/4
•
•
ø5/32
••••
ø1/4
••
Straight ElbowStraight Elbow
OUT side
Note) When the handle and the OUT piping are located on the same side, the elbow fitting is directed to the rear side (DIN rail side).
NilA
Note) Pressure gauges are not available with the copper- free specification.
Without pressure gauge
With pressure gauge
OUT
IN
IN
OUT
IN/OUT: Bottom IN/OUT: TopIN: BottomOUT: Top
IN: TopOUT: Bottom
Handle position: TopOUT piping position: Top
Handle position: BottomOUT piping position: Bottom
Front side(Pressure
gauge side)
Rear side(DIN rail side)
Front side(Pressure
gauge side)
Rear side(DIN rail side)
Symbol
060708181920252627323334
IN side
ø4
•
•
ø6
••
••
ø4
•
•
ø4
••
••
ø6
••
••
ø6
•
•
ø4
••••
ø6
••
StraightStraight Elbow
OUT side
7. Unit representation
1 2 3 4 5 6 7
Inch size
INOUT OUTIN
IN INOUT OUT
ABC
Top
Front
Bottom
FrontTop Bottom Symbol
1234
IN side
Bottom
••
Top
••
Bottom
•
•
Top
••
OUT side
Elbow Note)
Symbol
Nil1234567
None
•0.35 MPasettingNote 1)
•
•••
Note 2)Non-relieving
••••
Oil-free
••••
Symbol
NilZ Note)
DescriptionDisplay unit for product name plate and pressure gauge: MPa
Display unit for product name plate and pressure gauge: PSINote) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)
A
Compact Manifold Regulator Individual Supply Type
Series ARM11B
14-4-30
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Construction
Description
Body for regulator block
Bonnet
Handle
Valve seat
Adjusting screw assembly
Adjustment spring
Regulator clip
Manifold block
Blanking plate assembly
Square nut
Individual supply bushing
No. Material
PBT
PBT
POM
POM
Reinforced steel
Steel wire
Stainless steel
PBT
—
Steel
POM
Component Parts
Specifications
Direct acting
Diaphragm regulator
Relief type
Non-relieving type
Within (Unbalance type)
ø4, ø6, ø5/32, ø1/4
ø4, ø6, ø5/32, ø1/4
1.5MPa
1.0MPa
0.05 to 0.7MPa
0.05 to 0.35MPa (Low pressure type)
Air
5 to 60°C
Regulator construction
Working principal
Relief mechanism
Backflow function
IN side tubing O.D.
OUT side tubing O.D.
Proof pressure
Maximum operating pressure
Set pressure range
Fluid
Ambient and fluid temperature
Standard
Optional
Standard
Optional
OUTIN
KCOLHSUP
SMC
A
A
SMC
Description
Diaphragm assembly
Valve
Valve spring
Gasket
O-ring
O-ring
O-ring
O-ring
Fitting assembly
Port plug
No. Material
Weatherproof NBR, POM
HNBR, Aluminum alloy
Stainless steel
HNBR
NBR
NBR
NBR
NBR
—
PBT/HNBR
Part no.
136126A
136127-30
136131
136137-30
136146
136147
136148
136149
Refer to page 14-4-37.
Refer to page 14-4-38.
Replacement Parts
A-A
Note) When the regulator is used with backflow, operate at a set pressure of 0.1 MPa or above.
�
�
�
�
�
�
�
!1
q
o
e
y
r �
�
t
w
i
!0
u
q
w
e
r
t
y
u
i
o
!0
!1
�
��
��
��
��
��
��
��
�
�
14-4-31
Series ARM11BCompact Manifold RegulatorIndividual Supply Type
Flow Characteristics
ARM11BA1-306 (One-touch fittings: IN/OUT ø4) ARM11BA1-306-1 (One-touch fittings: IN/OUT ø4)
Pressure Characteristics
ARM11BA1-306 ARM11BA1-306-1
ARM11BA1-307 (One-touch fittings: IN ø6, OUT ø4) ARM11BA1-307-1 (One-touch fittings: IN ø6, OUT ø4)
ARM11BA1-308 (One-touch fittings: IN/OUT ø6) ARM11BA1-308-1 (One-touch fittings: IN/OUT ø6)
0.7
0.6
0.5
0.4
0.3
0.2
0.1
00 10050 150
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.000 20 40 60 80 100
0.7
0.6
0.5
0.4
0.3
0.2
0.1
00 10050 150
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.000 20 40 60 80 100
0.7
0.6
0.5
0.4
0.3
0.2
0.1
00 100 200 300
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.000 50 100 150 200
0.30
0.25
0.20
0.15
0.100.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.25
0.20
0.15
0.10
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Flow rate �/min(ANR) Flow rate �/min(ANR)
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Flow rate �/min(ANR) Flow rate �/min(ANR)
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Flow rate �/min(ANR) Flow rate �/min(ANR)
Conditions: Inlet pressure 0.5MPaOutlet pressure 0.2MPaFlow rate 20�/min (ANR)
Conditions: Inlet pressure 0.7MPaOutlet pressure 0.2MPaFlow rate 20�/min (ANR)
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Inlet pressure MPa Inlet pressure MPa
Set point
Set point
14-4-32
Series ARM11B
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
14-4-33
Series ARM11BCompact Manifold RegulatorIndividual Supply Type
Dimensions
ARM11BA1-�08Handle position: Top
DIN rail part no.
AXT100-DR-8
AXT100-DR-10
AXT100-DR-12
AXT100-DR-14
AXT100-DR-16
AXT100-DR-19
AXT100-DR-21
AXT100-DR-23
AXT100-DR-25
AXT100-DR-28
Stations
123456789M
L2 dimension
110.5
135.5
160.5
185.5
210.5
248
273
298
323
360.5
ARM11BB1-�08Handle position: Front
DIN rail part no.
AXT100-DR-8
AXT100-DR-10
AXT100-DR-12
AXT100-DR-14
AXT100-DR-16
AXT100-DR-19
AXT100-DR-21
AXT100-DR-23
AXT100-DR-25
AXT100-DR-28
Stations
123456789M
L2 dimension
110.5
135.5
160.5
185.5
210.5
248
273
298
323
360.5
ARM11BC2-�08Handle position: Bottom
DIN rail part no.
AXT100-DR-8
AXT100-DR-10
AXT100-DR-12
AXT100-DR-14
AXT100-DR-16
AXT100-DR-19
AXT100-DR-21
AXT100-DR-23
AXT100-DR-25
AXT100-DR-28
Stations
123456789M
L2 dimension
110.5
135.5
160.5
185.5
210.5
248
273
298
323
360.5
33.5
16
5314
1212
L2
11.5
3
5.3
84
56
52.539
28
L2-10.5
5.5
8
L1=(28 x n)+3618 28
SM
C
OUTIN
SMC
OUTIN
SMC
33.5
14
8116
1212
L2
11.58
5.3
356
28
52.528
L2-10.5
5.5
L1=(28 x n)+3618 28
KCOLHSUP
SMC
KCOLHSUP
SMC
OUT IN OUT IN
SMC SMC
SM
C
33.5
14 1653
1212
L2
3
11.58
5.3
84
56
52.53928
L2-10.5
5.5
L1=(28 x n)+3618 28
SM
C
OUT IN
KCOLHSUP
SMC
OUT IN
KCOLHSUP
SMC
SMCSMC
Compact Manifold RegulatorOption
Common Supply Type
Individual Supply Type
L side end
block
L side end
block
DIN rail
DIN rail
One-touch fitting for common supply block
Regulator block
Regulator block
One-touch fitting for regulator block
One-touch fitting for regulator block
Port plug
Common supply bushing
Common supply block
Pressure switch block
Pressure gauge
Pressure gauge
R side end block
R side end block
Individual supply bushing
14-4-34
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
ARM11A 1A R 1041. Handle position
5. Option4. Accessory
ABC
TopFront
Bottom
3. OUT fitting type
Metric size
2. OUT piping position
12
Regulator Block
Common supply type
Handle position Top Handle position BottomHandle position Front
BottomTop
Symbol
54556667
ø5/32
•ø1/4
•ø5/32
•ø1/4
•
Straight ElbowSymbol
04051617
ø4
•ø6
•ø4
•ø6
•
Straight Elbow
NilA
Note) Pressure gauges are not available with the copper-free specification.
Without pressure gaugeWith pressure gauge Symbol
Nil1234567
None
•Non-
relieving
••••
Oil-free
••••
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.Note 2) The oil-free type has non- greased fluid contact areas.
0.35 MPasetting Note 1)
••••
ARM11B 1A R 1061. Handle position
5. Option
4. Accessory
Individual supply type
NilA
Note) Pressure gauges are not available with the copper-free specification.
Without pressure gaugeWith pressure gauge
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.Note 2) The oil-free type has non-greased fluid contact areas.
13
6
3 28
51.5
8470
OUTIN
SM
C
13 1512
3
5642
80
28.5
OUT IN
KCO
LH
SUP
SM
C
SM
C
15 1312
3 28
51.5
8470
OUTIN
SM
C
2. IN/OUT piping position
Symbol
1234
IN sideBottom
••
Top
••
Bottom
••
Top
••
OUT side
3. IN/OUT fitting type
Metric size Inch size
Symbol
565758686970757677828384
IN side
ø5/32
•
•
ø1/4
••
••
ø5/32
•
•
ø5/32
••
••
ø1/4
••
••
ø1/4
•
•
ø5/32
••••
ø1/4
••
Straight ElbowStraight ElbowOUT side
Symbol
060708181920252627323334
IN side
ø4
•
•
ø6
••
••
ø4
•
•
ø4
••
••
ø6
••
••
ø6
•
•
ø4
••••
ø6
••
Straight ElbowStraight ElbowOUT side
136
3
51.5
847026(Max.28)
OUT IN
SM
C
136
3
51.5
847026(Max.28)
OUT IN
SM
C
6
13
3
5642
80
OUT IN
KCO
LH
SUP
SM
C
SM
C
28.5
Z
Z
6. Unit representation
Symbol
Nil
ZDisplay unit for product name plate and pressure gauge: PSI
Display unit for product name plate and pressure gauge: MPa
Description
6. Unit representation
1 2 3 4 5 6
1 2 3 4 5 6
Inch size
Handle position Top Handle position Front Handle position BottomABC
TopFront
Bottom
Symbol
Nil1234567
None
•Non-
relieving
••••
Oil-free
••••
0.35 MPasetting Note 1)
••••
A
A
Note) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)
Symbol
Nil
Z Note)
Description
Display unit for product name plate and pressure gauge: PSI
Display unit for product name plate and pressure gauge: MPa
14-4-35
Series ARM11A/BCompact Manifold RegulatorCommon/Individual Supply Type
14-4-36
Series ARM11A/B
ARM11A 1 S 01
3. IN fitting type
Metric size
Common Supply Block
Pressure Switch Block
Common supply block (S) Common supply block with pressure switch (P)
3-way valve common supply block+
Pressure switch block (W)3-way valve common supply block (V)
1. IN piping position
12
Bottom
Top
5. Accessory
NilA
Note) Leave the field blank for types without pressure switch.
Pressure switch lead wire length: 0.5 m
Pressure switch lead wire length: 3.0 m
4. Option
Note) The oil-free type has non-greased fluid contact areas.
Nil3
None
Oil-free
2. Common supply block type
SPVW
Common supply block
Common supply block with pressure switch
3-way valve common supply block
3-way valve common supply block + Pressure switch block
Note) The oil-free specification is not available for P and W types of common supply blocks (types with pressure switch).
Symbol
515253636465
Straight
ø1/4
•ø5/16
•ø3/8
•
ø5/16
•
ø1/4
•
ø3/8
•
ElbowSymbol
010203131415
Straight
ø6
•ø8
•ø10
•
ø8
•
ø6
•
ø10
•
Elbow 5
2417
32.5
20
56
SM
C
5617
5
24 20
56
0.5 0.10.3
MP
a
0.6 0.20.4
5
26 22
56
5017
202456
56
0.5 0.10.3
MP
a
0.6 0.20.4
5617
5
46 4222
56
0.5 0.10.3
MP
a
0.6 0.20.4
ZA
ARM11AW
1. Accessory
NilA
Pressure switch lead wire length: 0.5 m
Pressure switch lead wire length: 3.0 m
ZA
2. Unit representation
6. Unit representation
DescriptionDisplay unit for product name plate: MPa
Display unit for product name plate: PSI
Symbol
NilZ Note)
Note) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.) The pressure switch offers dual unit representation in MPa and PSI.
Symbol
NilZ Note)
DescriptionDisplay unit for product name plate: MPa
Display unit for product name plate: PSI
Note) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.) The pressure switch offers dual unit representation in MPa and PSI.
1 2
1 2
3 4 5 6
Inch size
3
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
DIN Rail
One-touch Fittings for Regulator Block One-touch Fittings for Common Supply Block
X
Y
6.5
X
XX
12.5
Y
NO.L
123
235.5
348
460.5
573
685.5
798
8110.5
9123
10135.5
NO.L
11148
12160.5
13173
14185.5
15198
16210.5
17223
18235.5
19248
20260.5
NO.L
21273
22285.5
23298
24310.5
25323
26335.5
27348
28360.5
29373
30385.5
NO.L
31398
32410.5
33423
34435.5
35448
36460.5
37473
38485.5
39498
40510.5
Note) Put an appropriate No. from the table below in the place of “n.” For the L dimension, please refer to “Dimensions.”
• When only DIN rail is required: DIN rail part no.
AXT100- DR - n
5.5
2535
L
1.25 P=12.5 5.25 7.5
L Dimension L=12.5 x n+10.5
X
337
Fitting size
ø4, ø5/32ø6
ø1/4
Y
19 19.522
Fitting size
ø4, ø5/32ø6
ø1/4
X
5 5 5.55
Fitting size
ø6ø8, ø5/16ø10, ø3/8
ø1/4
Y
20 23 26 20.5
X
11.511.511.5
X
19202219
Fitting size
ø6ø8, ø5/16ø10, ø3/8
ø1/4
VVQ1000 50A C4
Option
Fitting type
Fitting size
One-touchfittings for
regulator block
NilX17
None
Oil-free
NilL1
Straight
Elbow
C4C6N3N7
ø4ø6
ø5/32ø1/4
VVQ2000 51A C6
Option
Fitting type
Fitting size
One-touch fittingsfor regulator
NilX17
None
Oil-free
NilL1
Straight
Elbow
C6C8C10N7N9N11
ø6ø8ø10ø1/4ø5/16ø3/8
Straight type Elbow type Straight type Elbow type
14-4-37
Series ARM11A/BCompact Manifold RegulatorCommon/Individual Supply Type
End Block Pressure Gauge
Port Plug Bushing
VVQ0000 58A
Option
Single unit regulator / Port plug for regulator block
NilX17
None
Oil-free
ARM11EOption
SpecificationsEnd block type
End blockNil3
None
Oil-freeSymbol
LR
Mounting position
Left side
Right side
L
Note 1) Since the L side end block is oil-free, leave the field blank for it.
187
32.526
20
SM
C
2218
7
32.526
20
56 56
SM
C
L side end block R side end block
Part no.
GC3-4A-X2102
GC3-10A-X2102
GC3-P4A-X2102
GC3-P10A-X2102
Pressure gauge indication range
0 to 0.4 MPa
0 to 1.0 MPa
0 to 60 PSI
0 to 150 PSI
Indication unit
MPa
PSI
Part no.
136144-S
136144-K
Description
Common supply bushing
Individual supply bushing
Fluid
Ambient and fluid temperature
Display accuracy
Calibration angle
Limit indicator
Air
-5 to 60°C
±3%F.S. (Full Span)
230°
With limit indicator
8
15
12
A-AA
A8
15
12
A-AA
A
10
ø10
136144-S 136144-K
14.5
ø1.
5
6
17.5
28
28
OPEN
VCO
ER
14-4-38
Series ARM11A/B
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
How to Order
Specifications
ARM10 06 B Z1
Symbol
060708181920252627323334
IN side
Straight
ø4
•
•
ø6
••
••
ø4
•
•
ø6
••
••
ø4
••
••
ø6
•
•
ø4
••••
ø6
••
Elbow Straight Elbow
OUT side
Symbol
565758686970757677828384
IN side
Straight
ø5/32
•
•
ø1/4
••
••
ø5/32
•
•
ø1/4
••
••
ø5/32
••
••
ø1/4
•
•
ø5/32
••••
ø1/4
••
Elbow Straight Elbow
OUT side
Symbol
Nil1234567
None
•0.35 MPasettingNote 1)
•
•••
Note 2)Non-relieving
••••
Oil-free
••••
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.Note 2) The oil-free type has non-greased fluid contact areas.
ARM10
Direct acting
Diaphragm regulator
Relief type
Non-relieving type
Within (Unbalance type)
ø4, ø6, ø5/32, ø1/4
ø4, ø6, ø5/32, ø1/4
1.5MPa
1.0MPa
0.05 to 0.7MPa
0.05 to 0.35MPa (Low pressure type)
Air
5 to 60°C
60g
Model
Regulator construction
Working principal
Relief mechanism
Backflow function
IN side tubing O.D.
OUT side tubing O.D.
Proof pressure
Maximum operating pressure
Regulating pressure range
Fluid
Ambient and fluid temperature
Weight
Standard
Optional
Standard
Optional
Straight
Elbow
Bracket
Panel nut
Pressure gauge
1. IN/OUT fitting type
Metric size Inch size
3. Option
Note 1) Note 2)
Symbol
NilBGP
BGGP
None
•Bracket
•
•
Pressure gauge
•••
Panel nut
(•)
•(•)
•Note 1) In case of a type with bracket, the panel nut is included.Note 2) Pressure gauges are not available with the copper-free specification.
2. Accessory
4. Unit representation
JIS Symbol
Relief type Non-relieving type
Symbol
NilZ Note)
DescriptionDisplay unit for product name plate and pressure gauge: MPa
Display unit for product name plate and pressure gauge: PSINote) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)
Note) When the regulator is used with backflow, operate at a set pressure of 0.1 MPa or above.
1 2 3 4
IN sideOUT side
IN side
OUT side
Regulator Single Unit Type
Series ARM10
14-4-39
14-4-40
Series ARM10
1. IN/OUT piping position
2. IN/OUT fitting type
Inch sizeMetric size
Note 1)
Note 3)
Note 2)
Symbol
NilB
GPBGGP
None
•Bracket
••
Pressure gauge
••••
Panel nut
(•)
(•)
••
Display cover
•Note 1) In case of a type with bracket, the panel nut is included.Note 2) Pressure gauges are not available with the copper-free specification.Note 3) Please note that the dimensions will be big when GPC is required.
3. Accessory
GPC
Panel nut
Display cover
ARM10F 0612
B31
14
Z5
Front handle type
Panel Display cover
Example of panel mounting
How to Order
IN side
IN side
OUT side
OUT side
Top Top
Bottom Bottom
Symbol
060708181920252627323334
IN side
Straight
ø4
•
•
ø6
••
••
ø4
•
•
ø6
••
••
ø4
••
••
ø6
•
•
ø4
••••
ø6
••
Elbow Straight Elbow
OUT side
Symbol
565758686970757677828384
IN side
Straight
ø5/32
•
•
ø1/4
••
••
ø5/32
•
•
ø1/4
••
••
ø5/32
••
••
ø1/4
•
•
ø5/32
••••
ø1/4
••
Elbow Straight Elbow
OUT side
Panel nut
Bracket
Pressure gauge
1234
SymbolIN side OUT side
Bottom Top Bottom Top
•• •
•
•
•••
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.Note 2) The oil-free type has non-greased fluid contact areas.
4. Option
Symbol
Nil1234567
None
•0.35 MPasettingNote 1)
•
•••
Note 2)Non-relieving
••••
Oil-free
••••
5. Unit representation
Symbol
NilZ Note)
DescriptionDisplay unit for product name plate and pressure gauge: MPa
Display unit for product name plate and pressure gauge: PSI
Note) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)
Specifications
ARM10F
Direct acting
Diaphragm regulator
Relief type
Non-relieving type
Within (unbalance type)
ø4, ø6, ø5/32, ø1/4
ø4, ø6, ø5/32, ø1/4
1.5MPa
1.0MPa
0.05 to 0.7MPa
0.05 to 0.35MPa (Low pressure type)
Air
5 to 60°C
72g
Model
Regulator construction
Working principal
Relief mechanism
Backflow function
IN side tubing O.D.
OUT side tubing O.D.
Proof pressure
Maximum operating pressure
Set pressure range
Fluid
Ambient and fluid temperature
Weight
Standard
Optional
Standard
Optional
Note) When the regulator is used with backflow regulator, operate at a set pressure of 0.1 MPa or above.
14-4-41
Series ARM10RegulatorSingle Unit Type
Flow Characteristics
ARM10F�-06ARM10-06 (One-touch fittings: IN/OUT ø4)
ARM10F�-06-1ARM10-06-1 (One-touch fittings: IN/OUT ø4)
Pressure Characteristics
ARM10F�-06ARM10-06
ARM10F�-06-1ARM10-06-1
ARM10F�-07ARM10-07 (One-touch fittings: IN ø6, OUT ø4)
ARM10F�-07-1ARM10-07-1 (One-touch fittings: IN ø6, OUT ø4)
ARM10F�-08ARM10-08 (One-touch fittings: IN/OUT ø6)
ARM10F�-08-1ARM10-08-1 (One-touch fittings: IN/OUT ø6)
0 50 100 150
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.000 20 40 60 80 100
0 50 100 1500.00
0.05
0.10
0.15
0.20
0.25
0.300.35
0 20 40 60 80 100
0.70.6
0.5
0.4
0.3
0.2
0.1
00 50 100 150 200 250 300
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0 50 100 150 200
0.10
0.15
0.20
0.25
0.30
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.10
0.15
0.20
0.25
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Condition:Inlet pressure 0.7MPa
Condition:Inlet pressure 0.5MPa
Conditions: Inlet pressure 0.5MPaOutlet pressure 0.2MPaFlow rate 20�/min (ANR)
Conditions: Inlet pressure 0.7MPaOutlet pressure 0.2MPaFlow rate 20�/min (ANR)
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Out
let p
ress
ure
MP
a
Flow rate �/min(ANR) Flow rate �/min(ANR)
Flow rate �/min(ANR) Flow rate �/min(ANR)
Flow rate �/min(ANR) Flow rate �/min(ANR)
Inlet pressure MPa Inlet pressure MPa
Set point
Set point
14-4-42
Series ARM10
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Construction
Dimensions
Description No. Material
PBT
PBT
POM
POM
Reinforced steel
Steel wire
Stainless steel
—
Steel
Component Parts2
ø23
28
10.535
26(M
ax.2
8)
12
22
28
73.5 59
.5
42 Through hole for M3 ø3.2
SMC
KCOLHSUP
SMC
OUTIN
DescriptionNo. Material
Weatherproof NBR, POM
HNBR, Aluminum alloy
Stainless steel
NBR
NBR
NBR
—
Part no.
136126A
136127-30
136131
136146
136147
136148
Refer to page 14-4-45.
Replacement Parts
Diaphragm assembly
Valve
Valve spring
O-ring
O-ring
O-ring
Fitting assembly
Body
Bonnet
Handle
Valve seat
Adjusting screw assembly
Adjustment spring
Regulator clip
Blanking plate assembly
Square nut
ARM10- 0608
For dimensions and accessories of One-touch fittings, please refer to page 14-4-45.
25
Panel cutout dimensions
ARM10 ARM10F
Plate thickness: Max.2.1
w
��
�
�
�
�
i
o
e
t
y
r
u
q
�
�
i
w
t
e
y
r
�
�
o
q
u
�
�
�
�
�
q
w
e
r
t
y
u
i
o
��
��
��
��
��
��
�
14-4-43
Series ARM10RegulatorSingle Unit Type
14-4-44
Series ARM10
Dimensions
ARM10F1- 0608
ARM10F1- 06GPC08GPC
3758
ø20
28
5
7
15
26(Max.28)
34
�28
to 2
8.5
ø23
Plate thickness: Max.2.1
Panel cutout dimensions
12
INOUT34
�28
to 2
8.5
ø23
Plate thickness: Max.2.1
Panel cutout dimensions
3858
ø20
28
INOUT
7
156
26(Max.28)
�30
734
1462
MPa
1
0.8
0.60.4
0.2
0
OPEN
KCOLHSUPSMC
12
INOUT
4-R1 or less
4-R1 or less
INOUT
7
22
12
31
3414
62SMC
KCOLHSUP
SMC
Through hole for M3 ø3.2
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
One-touch fittingsfor regulator
Regulator/Single Unit TypeOption
Specifications
Pressure Gauge One-touch Fittings for Regulator
Pressure gauge indication range
0 to 0.4MPa
0 to 1.0MPa
0 to 60PSI
0 to 150PSI
Indication unit
MPa
PSI
Part no.
GC3-4A-X2101
GC3-10A-X2101
GC3-P4A-X2101
GC3-P10A-X2101
Panel Nut
Bracket
Air
-5 to 60°C
±3%F.S. (Full Span)
230°
With limit indicator
17g
Fluid
Ambient and fluid temperature
Display accuracy
Calibration angle
Limit indicator
Weight
VVQ1000-50A C4Fitting type
Nil
L1
Straight
Elbow
Fitting sizeC4
C6
N3
N7
ø4
ø6
ø5/32
ø1/4
OptionNil
X17
None
Oil-free
14.5
ø1.
5
6
17.5
28
28
OPEN
VCO
ER
Display Cover
136133
POM
1g
Part no.
Material
Weight
136134
Nickel plated steel
17g
Part no.
Material
Weight
136155
PBT
0.5g
Part no.
Material
Weight
ø27.8
4.5
27(Width across flats of
equilateral octagon)
36.5
4.5
16 11
4
(R)
6.5
2
40
30
ø22
R13.5
23
Fitting size
ø4, ø5/32
ø6
ø1/4
X
2
2
6
Fitting size
ø4, ø5/32
ø6
ø1/4
Y
21.5
22
24.5
X
10.5
10.5
10.5
Fitting size
ø4, ø5/32
ø6
ø1/4
X
7
7
11
Fitting size
ø4, ø5/32
ø6
ø1/4
Y
21.5
22
24.5
X
15.5
15.5
15.5
Straight type
Elbow type
Elbow type
Y
5.5
X
ARM10
Straight type
ARM10F
1�
30
X10
.5
Y
XX
14-4-45
Series ARM10FMade to Order Specifications:Please contact SMC regarding detailed specifications, dimensions and delivery.
Specifications
How to Order
Dimensions
Direct acting
Diaphragm regulator
Relief type
Non-relieving type
Within (Unbalance type)
ø4
ø7
1.5MPa
1.0MPa
0.05 to 0.7MPa
0.05 to 0.35MPa (Low pressure type)
Air
5 to 60°C
73g
Regulator construction
Working principal
Relief mechanism
Backflow function
IN/OUT air passage diameter
IN/OUT gasket sealing O.D.
Proof pressure
Maximum operating pressure
Set pressure range
Fluid
Ambient and fluid temperature
Weight
Standard
Optional
Standard
Optional
Note 1) Mounting bolts and O-rings (2 of each) are attached.Note 2) When the regulator is used with backflow, operate at a set pressure of 0.1 MPa or above.
ARM10F 1A1 2
Z X2013 For manifold
1. Accessory
Nil
A
Without pressure gauge
With pressure gauge
3. Unit representation
Symbol
NilZ Note)
Description
Display unit for product name plate and pressure gauge: MPa
Display unit for product name plate and pressure gauge: PSI
Note) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)
Symbol
Nil1234567
None
•
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.Note 2) The oil-free type has non-greased fluid contact areas.
2. Option
Non-relieving
••••
37
22
58(M
ax.6
0)
9
15 5
31
62 3414
ø20
28
SMC
O-ring sizeø4 x 1.5W
Holding screwM3 x 0.5 x 20
IN OUT
INOUT
KCOLHSUP
SMC
Regulator single unit front handle type/ For manifold
0.35 MPasettingNote 1)
•
•••
Example
Need to prepare manifold base.
Note 2)
Oil-free
••••
14-4-46
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
1. Confirm the specifications.The products appearing in this catalog are designed for use only in compressed air systems.Do not use outside the specified ranges of pressure, temperature, etc., as this may cause damage or faulty operation. Please consult with SMC if fluid other than compressed air is to be used.
2. Do not use the products in this catalog as “safety accessories” stipulated in Art. 1, paragraph 2.1.3 and Art. 3, paragraph 1.4 of Pressure Equipment Directive (97/23/EC).The Pressure Equipment Directive defines a safety accessory as a device which is designed to prevent pressure equipment from exceeding the allowable limit values.
3. Confirm the regulating pressure range.Be sure to install safety devices if output pressure above the set range can lead to damage or malfunction of equipment on the outlet side.
4. Residual pressure relief without inlet pressure.In cases where the inlet pressure has been released while the outlet pressure is in a low-pressure setting state, it may not be possible to exhaust the outlet pressure (residual pressure relief). Provide a residual pressure relief circuit if reliable outlet pressure relief must be performed.
5. When used with a closed downstream circuit and balance circuit.Please contact SMC as there are cases in which the product cannot be used.
3. After inserting the tubing, pull it lightly to confirm that it will not come out. If the tubing is not inserted to the end, air leakage or disconnection may occur.
4. When piping, increase the length of the tubing to allow for any possible warping, increased tension or moment load, etc. to the fittings and tubing.
2) Tubing removal1. Push both the release bushing and flange.2. Pull out the tubing while holding the release bushing so that it
will not be locked again. Insufficient pressure on the release bushing will result in increased biting force that will impede the tubing removal.
3. When re-using a removable tubing, cut of the deformed part. If the deformed part of the tubing is used, it can cause air leakage or impede the tubing removal.
In cases where a tubing brand other than SMC is used, confirm that the tubing outside diameter accuracy satisfies the following specifications.
1. Nylon tubing ±0.1 mm or less2. Soft nylon tubing ±0.1 mm or less3. Polyurethane tubing +0.15 mm or less/–0.2 mm or lessDo not use the tubing if it does not satisfy the outside diameter accuracy. Tubing connection may be impossible or air leakage or tubing disconnection may occur after connection.
Design & Selection
Warning
Compact Manifold Regulator/Series ARM10/11Specific Product Precautions 1Be sure to read before handling.
1. Read the instruction manual carefully.The product should be mounted and operated with a good understanding of its contents. Also, keep the manual where it can be easily referred to at any time.
2. Ensure space for maintenance.Ensure the necessary space for maintenance activities.
3. Strictly observe the tightening torque of the screw.Tighten the screw at the recommended torque in installation.
Mounting
Warning
1. Use clean air.Do not use the regulator if the compressed air contains synthetic oil including chemicals or organic solvents, salt or corrosive gas. It may lead to damage or malfunction.
Air Supply
Warning
1. Install an air filter.Install an air filter on the inlet side in close proximity with the regulator. Select a type with 5 µm or smaller filtration.
2. Install an after cooler, air dryer or mist separator (drain catch) to remove drainage.Compressed air containing excessive drainage may cause malfunction of the regulator, pressure switch or other pneumatic equipment.
3. If an excessive amount of carbon powder is generated, install a mist separator as a measure.If an excessive amount of carbon powder is generated from the compressor, it may adhere to the interior of the regulator and cause malfunction.
Refer to Best Pneumatics Vol. 14 for further details on compressed air quality.
Caution
Piping
Caution
Precautions in use of One-touch fittings1) Tubing installation1. Take a tubing with no flaws on its periphery and cut it off at a
right angle. Use a TK-1, 2 or 3 tubing cutter to cut the tubing. Do not use pinchers, nippers or scissors, etc. The tubing might be cut diagonally or flattened, making installation impossible or causing problems such as disconnection and leakage. Also, ensure sufficient tubing length.
2. Hold the tubing and push it in slowly, inserting it securely all the way into the fitting.
Piping
Caution
14-4-47
Compact Manifold Regulator/Series ARM10/11Specific Product Precautions 2Be sure to read before handling.
Regulator
1. Set up the regulator while verifying the pressure that is indicated on the inlet side and outlet side pressure gauges. Turning the handle excessively could damage the internal parts.
2. The adjustment handle must be operated manually. Using a tool to turn the handle could lead to damage.
Adjustment
Warning
1. Maintenance should be performed according to the procedure indicated in the instruction manual.Improper handling can cause damage and malfunction of equipment and machinery.
2. Maintenance operations.Improper handling of compressed air is dangerous. Therefore, in addition to observing the product specifications, replacement of elements and other maintenance activities should be performed by personnel having sufficient knowledge and experience pertaining to pneumatic equipment.
3. Pre-maintenance inspection.When removing this product, turn off the electric power, and be certain to shut off the supply pressure and exhaust the compressed air in the system. Proceed only after confirming that all pressure has been released to the atmosphere.
4. Post maintenance inspection.After installation or repair, reconnect compressed air and electricity and conduct appropriate inspections to confirm proper operation. If there is an audible air leakage, or if the equipment does not operate properly, stop operation and confirm that the equipment is installed correctly.
5. Modification prohibited.Do not modify or reconstruct the unit.
Maintenance
Warning
Regulator
1. Set up the regulator after carefully verifying the pressure that is indicated on the inlet side pressure gauge.
2. Set the outlet pressure in a range that is within 85% of the inlet pressure.Also, it should not exceed the set pressure range.
3. Release the lock to adjust the pressure. After the adjustment, engage the lock. Failure to observe this procedure could damage the handle or cause the outlet pressure to fluctuate.
4. Turning the pressure adjustment handle clockwise increases the outlet pressure and turning it counter-clockwise decreases the pressure. (To achieve the final set pressure, gradually increase from low pres-sure until the desired pressure is reached.)
Caution
Operating Environment
1. Do not operate in locations having an atmosphere of corrosive gases, chemicals, sea water, fresh water or water vapor, or where there will be contact with the same.
2. In locations which receive direct sunlight, the sunlight should be blocked .
3. Do not operate in locations where vibration or impact occurs.
4. Do not operate in a location near a heat source or where radiated heat will be received.
WarningHow to adjust indicator of the pressure gauge.Make sure to follow the instruction when opening the lens cover to adjust the pressure gauge.
Adjustment
Caution
1. Open the lens cover to the arrow’s direction with finger nail.
2. Adjust the gauge needle with for example, a flat head screw driver.
3. Close the lens cover to the arrow’s direction until it snaps on.
CO
VER
OP
CO
VER To close the lens.
OPE
CO
VER
To open the lens.
14-4-48
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Observe the proper screw tightening torque in installation.Tightening beyond the proper tightening torque may damage the mounting screws, blocks or switches.If the force is below the tightening torque range, the threaded joint can come loose.
1. Tightening torque for fixing screws and panel nuts of a single unit regulator
Warning
2. Tightening torque for regulator assembly fixing screws on regulator block
3. Tightening torque for blanking plates and pressure gauge fixing screws on regulator block
One-touch fitting replacementFor the ease of replacement, One-touch fittings are installed as the cassette type. One-touch fittings are retained with clips inserted from the directions illustrated blow. Remove the clips with a flat head screw driver to replace the One-touch fittings. When installing, insert each One-touch fitting deeply to the end and reinsert the clip to the specified position.
1. Single unit regulator
Caution
Pressure supply of 3-way valve common supply blockMake sure that the handle is set at the OPEN or SHUT position in operation. The block cannot be used for the purpose of containing pressure because it allows a small amount of leakage.
Caution
2. Regulator block
3. Various common supply blocks
4. Tightening torque for pressure switch fixing screws on common supply block with pressure switch and pressure switch block
5. Tightening torque for DIN rail clamp screws on end block
Blocks/Series ARM10/11Specific Product PrecautionsBe sure to read before handling.
Handling
1±0.1N·m
0.32±0.03N·m
0.32±0.03N·m
0.32±0.03N·m
0.18±0.02N·m
1.5±0.15N·m 90°
OPEN
SHUT
14-4-49
1. Operate the switch only within the specified voltage.Use of the switch outside the range of the specified voltage can cause malfunction and damage to the switch, it may also increase the risks of electrical shocks or fire.
2. Never apply a load above the maximum load capacity.It can damage the switch or shorten the service life.
3. Be sure to observe the set pressure range and maximum operating pressure.Use of the switch outside the set pressure range can cause failure and use beyond the maximum operating pressure can damage the switch.
1. Connect the loadBe sure to connect the load to the pressure switch before connecting the power supply.
2. Use a contact protection box.If the load driven by the pressure switch is an induction load or connected with a lead wire of 5 m or longer, use a contact protection box in the following table.
WiringDesign & Selection
3. Contact protection box internal circuit
4. Contact protection box/Connection methodTo connect the switch body and the contact protection box, connect the lead wire of the contact protection box on the side marked with “SWITCH” and the lead wire from the switch body.Connect the switch body and the contact protection box with a lead wire of 1 m or shorter and arrange them as close as possible.
5. Lead wire dimensionsCovering: ø3.4Insulator: ø1.1Conductor: ø0.64
Warning Warning
1. Never use in the presence of explosive gases.These switches are not rated as explosion proof. Never use in the presence of an explosive gas as this may cause a serious explosion.
2. Do not use in an environment where a strong magnetic field is present.The influence of the external magnetic filed may cause the switch to malfunction.
3. Do not use in an environment where the switch is exposed to water or oil splashes.Because the switch has an open type construction, ingress of water or oil can corrode the electric circuit, resulting in malfunction and damage.
4. Do not apply vibration to the switch.If vibration is applied, malfunction or setting errors may result.
Operating Environment
Warning
1. Do not use the switch unless the equipment operates normally.After installation, repair or reform, connect air and electricity and conduct appropriate function and leakage tests to confirm proper installation.
2. Do not apply a tensile force to a cord.Be sure to hold the body to handle the product.Applying a tensile force to a cord may cause damage to the product.
3. Do not drop or bump the product.Dropping or bumping while handling may cause damage to the product.
Mounting
Warning
1. Do not use the switch with corrosive gas or liquid.Do not use the switch with corrosive gas or liquid. Such gas or fluid may cause damage to the switch.
2. Do not use the switch at a vacuum pressure.If used in a vacuum pressure range, the switch will suction the outer air and become unable to operate.
Pressure Supply
Warning
1. The switching setting indication scale shows the set value for pressure decrease.
2. When the ON pressure signal is to be detected, the ON signal comes on at the pressure found by adding the hysteresis to the pressure set on the scale plate.
3. The pressure indication on the scale plate is provided as a guideline. Use a pressure gauge to measure the precise settings.
Pressure Setting
Caution
Pressure Switches/Series ARM10/11Specific Product PrecautionsBe sure to read before handling.
Contact protection box
CD-P11CD-P12
Operating voltage
100V AC
24V DC
Lead wire length
Switch connection side: 0.5 m
Load connection side: 0.5 m
CD-P11Brown lead wire
Surge absorber
Blue lead wire
CD-P12Brown lead wire
Zener diode
Blue lead wire
Chokecoil
Chokecoil
14-4-50
M5 x 0.8
� Precautions—When drain or oil, etc. gets into the gauge, an error may occur for pressure indication.
Manifold Regulator
Series ARM1000/2000FluidProof pressureMaximum operating pressure
Regulating pressure range
Ambient and fluid temperatureFluidCracking pressure (Valve)Construction
Air1.2 MPa0.8 MPa
0.05 to 0.7 MPa0.2 MPa setting 0.05 to 0.2 MPa
–5 to 60°C (No freezing)Air
0.02 MPaRelieving type
Model PipingPort size Weight (g)
IN side OUT side Total weight (n: stations) Regulator (Except manifold)
ARM1000
ARM2000
Common INIndividual INCommon INIndividual IN
1 81 8
1 4
1 8
1 81 8
1 8
1 8
(80 x n) + 23 (79 x n) + 25 (188 x n) + 43 (187 x n) + 45
57
136
How to Order
Port Size/Weight
Standard Specifications
ARM1000-6A1-01G
ARM2000-4B2
ARM2000-4A2-01G
ARM 1000 A15 01 G 1Regulator for manifold
Body size
Numberof stations
Piping
Port size (OUT side)10002000
Thread type
1
···
1 station
10 10 stations
···
Symbol IN OUTA1A2B1B2
Common
Individual
Manifold sideBody side
Manifold sideBody side
NilN
RcNPT
Description
Common INIndividual IN
Manifold
Regulator main bodyARM2000
ARM2000A13622- ∗13623- ∗
ARM1000ARM1000A
13612- ∗13613- ∗
Note 3) When ordering single unit
01 81
AccessoryNilG
None (With plug)With pressure gauge
Option1 0.2 MPa setting
Option: Pressure Gauge: G15-10-01
How to Order
G15 10 01
Thread typeNilN
RcNPT
Max. display pressure10 1.0 MPa
Connectingthread
011/8 male thread, M5 female thread
Note 1) In the case of A1 and B1, a pressure gauge or a plug is mounted on the body side, while in case of A2 and B2, on the manifold side.
Note 2) When mounting a pressure gauge on the body side, its front faces the adjusting screw.
• “∗” in manifold part no. repersents the number of manifold stations of regulator.
Note 1) Use caution not to tighten excessively when mountinga pressure gauge, otherwise it may result in a breakdown. Tightening torque recommended (M5: 1.5 to 2 N·m, R1/8: 7 to 9 N·m) For sealing, use a pipe tape.
Note 4) When a regulator is not mounted on the manifold, use the following blank plate ass'y (with mounting screws and O-ring)For ARM1000: Part no. 136114AFor ARM2000: Part no. 136214A
IN
IN
Individual IN
OUT
OUT
JIS SymbolCommon IN
OUT
OUT
IN
Note 1) Pressure gauge for 1.0 MPa is used.
Note 2) Compared with standard specifications, its adjusting spring has only been changed. It is not the product which does not allow the pressure more than 0.2 MPa. Adjusting spring is not replaceable.
� 4 connection methods
� Small size pressure gauge ø15
� Backflow function available on the standard model
� Space-saving
∗ Not able to set the pressure excceding 1.0 MPa.
14-4-52
Lock nut
(Bod
y si
de)
(Manifold side)
Inlet pressure: 0.7 MPa
Out
let p
ress
ure
(MP
a)
Flow rate (� /min (ANR))
Out
let p
ress
ure
(MP
a)
Flow rate (� /min (ANR))
Out
let p
ress
ure
(MP
a)
Inlet pressure (MPa)
Out
let p
ress
ure
(MP
a)
Inlet pressure (MPa)
Initial set pointInitial set point
Initial set pointInitial set pointInitial set point
Flow Characteristics
Pressure Characteristics
No. NoteDescription Material
No.Part no.
Description Material
BodyManifoldValve guidePistonAdjusting springAdjusting screw
ValveValve springValve guideO-ringO-ring
Aluminum die-castedAluminum alloy
BrassBrass
Steel wireSteel
Brass, HNBRStainless steel
PolyacetalNBRNBR
Chromate treatedChromate treated
Zinc chromatedElectroless nickel plated
q
w
e
r
t
y
u
i
o
!0
!1
Component Parts
Replacement Parts
Construction (Individual IN)
ARM1000 ARM2000134819-30
1361513614
16.5 x 13.5 x 1.5JIS B 2401P7
13626-301362513624
23 x 20 x 1.5JIS B 2401P8
Setting
Warning1. In the case of the common IN style, supply pressure from the two IN ports from both ends.
Failure to observe this procedure could result in an excessive pressure drop.
Mounting/Adjustment
Maintenance
Caution
Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions.
1. Make sure to perform a periodic inspection of the pressure gauge when it is used by installing it between solenoid valve and actuator, etc. Sudden pressure changes could happen and the durability of the product could be reduced. Using an electronic style pressure gauge is recommended, depending on the situation.
1. Make sure to check the inlet pressure before setting the outlet pressure. Turning the pressure adjustment handle clockwise increases the outlet pressure and turing it counterclockwise decreases
the pressure. (To set the pressure, do so in the direction of pressure increase.)
2. Set the outlet pressure to 85% or less of the inlet pressure.
1. Release the lock to adjust the pressure. After the adjustment, engage the lock. Failure to observe this procedure could damage the handle or cause the outlet pressure to fluctuate. <Lock operating method>Loosen the lock nut to unlock it, and tighten it to lock it.
2. This product can be used as a regulator with a check valve by installing it between solenoid valve and actuator.
Precautions
Warning
(Initial setting) Inlet pressure: 0.7 MPaOutlet pressure: 0.2 MPaFlow rate: 10 � /min (ANR)
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
14-4-53
Pressure gauge(Option)
(With
pre
ssur
e ga
uge)
IN (Individual IN) IN (Common IN)
14.5
(W
ith p
ress
ure
gaug
e)Pressure gauge(Option)
(Mounting hole)
(Pitch)
IN (Common IN, with plug)
Dimensions
Model Symbol
ARM1000
ARM2000
ARM1000ARM2000
L1L2L1L2
136274839
255467667
37465
10495
49384
132123
5112103160151
6131122188179
7150141216207
8169160244235
9188179272263
10207198300291
Manifold stations (n)
A4.54.5
B25
34.5
C3443
D2128
E1827
F5670
G1620
H9
11.5
J1824
K1928
M5266
P9
11.5
Q11.516.5
R4.84.8
SymbolModel
Dimensions
Dimensions by the Number of Stations
14-4-54
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
ARM3000
ARM2500
How to Order
ARM 2500 05 A
Regulator for manifold
Body size
Number of stations
Piping
Port size (OUT side)25003000
02
Thread type
G1
02
···
2 stations
10 10 stations
···
Nil Rc
FN
GNPT
AccessoryNilG1G2
None (With plug)
Symbol
AB
Symbol Port size
0203
1/43/8
Applicable model
ARM2500ARM3000
TypeCommon INIndividual IN
INFrom end plate
From OUT port or G port
G33-10-�01GA33-10-�01
Standard Specifications
Port Size/Weight
Weight by the Number of Stations
Proof pressure
Maximum operating pressure
Regulating pressure range
Ambient and fluid temperature
Fluid
Construction
1.5 MPa
1.0 MPa
0.05 to 0.85 MPa
–5 to 60°C (No freezing)
Air
Relieving type
Model Piping
Port size Weight (kg)
IN sideOUT side
Pressuregauge
port size
ARM2500
ARM3000
Common IN
Individual IN
Common IN
Individual IN
BodyRegulator End plate
End plate
0.26 0.06
0.47 0.11
1 43 8
1 41 4
3 81 2
3 83 8
1 8
1 8
1 8
1 8
ARM2500
ARM3000
StationsModel 2 3 4 5 6 7 8 9 10
(kg)
0.68
1.25
0.96
1.75
1.23
2.25
1.51
2.75
1.78
3.26
2.06
3.76
2.33
4.26
2.61
4.76
2.89
5.26
Manifold RegulatorModular Style
Series ARM2500/3000
JIS SymbolCommon IN Individual IN
� A modular type that can be freely mounted on a manifold station.
� Optimal for central pressure control.
� Easily set up using the new handle. Also has a One-touch lock system.
∗ Pressure gauges are shipped together (but not assembled).
14-4-55
Width
acros
s flat
s 10
Caution
Model Part no. A
30
41
Composition of assemblySet nut (1349172)
Bracket (B220)
Set nut (131532)
Bracket (B320)
136314
136414
ARM2500
ARM3000
B
34
40
C
70
75.5
D
5.4
6.5
E
15.4
8
F
55
53
G
2.3
2.3
H
M33 x 1.5
M42 x 1.5
Option: Bracket Assembly Individual IN type can be used as a single unit regulator.
Model Part no.
136313136413
ARM2500ARM3000
Dimensions
Hexagon socket head cap screw (M5 x 70)
Hexagon socket head cap screw (M6 x 85)
Qty.
44
Note
With flat washer
With flat washer
Option: Pressure Gauge (Max. pressure indication: 1.0 MPa) Flow Characteristics
Option: Mounting Bolt Assembly
Inlet pressure: = 0.7 MPa
Pressure Characteristics
Initial settingP1 = 0.7 MPa P2 = 0.2 MPaQ = 20 �/min (ANR)
Mounting/Adjustment
Note) Tighten the set nut securely and fix it. Recommended torque for set nut ARM2500: 17.5 ± 3.5 N·m ARM3000: 22.5 ± 4.5 N·m
1. Release the lock to adjust the pressure. After the adjustment, engage the lock. Failure to observe this procedure could damage the handle or cause the secondary pressure to fluctuate.1) On the ARM2500 type, pull the adjustment
handle to release the lock and push the adjustment handle to engage the lock. If it does not lock easily, turn the handle slightly clockwise or counterclockwise before pushing it.
2) On the ARM3000 type, pull the adjustment handle to release the lock. (An orange colored line is provided at the bottom of the adjustment handle for visual checking.)
Push the adjustment handle to engage the lock. If it does not lock easily, turn the handle slightly clockwise or counterclockwise; then, push it until the orange colored line is no longer visible.
2. Make sure to check the inlet pressure before setting the pressure. The outlet pressure must be set to 85% or less of the inlet pressure. Failure to observe this procedure could cause the outlet pressure to fluctuate.
3. In the case of the common IN type, supply pressure from the two IN ports from both ends. Failure to observe this procedure could lead to an excessive pressure drop.
Example of mounting
Bracket
Set nut
Out
let p
ress
ure
(MP
a)
Flow rate (�/min (ANR))
Out
let p
ress
ure
(MP
a)
Flow rate (�/min (ANR))
Out
let p
ress
ure
(MP
a)
Inlet pressure (MPa)
Out
let p
ress
ure
(MP
a)
Inlet pressure (MPa)
ARM3000
ARM2500
ARM3000
ARM2500
Note 1) � in the gauge part no. (e.g. G33-10-�01) indicates the type of threads used for connection. For Rc, leave the symbol blank, and for NPT, enter “N”.Please consult with SMC for the supply of a pressure gauge with NPT port threads.
Note 2) Use caution not to tighten excessively when mounting a pressure gauge, otherwise it will may result in a breakdown. For sealing, use a pipe tape. Torque recommended: (R 1/8: 7 to 14 N·m).
G33-10-�01 GA33-10-�01
PrecautionsBe sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions.
Series ARM2500/3000
14-4-56
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Component Parts
Replacement Parts
Component PartsNo.
No.
Description
No.
Part no.
Description
Assembly
Component Qty.
1
111
1
222
Material Note
Description MaterialPart no.
q
w
o
!0
!1
!2
!3
!2
!3
Body
Bonnet
Aluminum die-casted
Polyacetal
Chromate treated/Platinum silver painted
Weather resistant NBR
Brass, HNBR
Stainless steel
NBR
NBR
NBR
ARM2500 ARM3000
ARM2500 ARM3000
1349161A
13639A
136310
11.5 x 8.5 x 1.5
JIS B 2401 P3
28 x 25 x 1.5
131515A
13649A
136410
14.5 x 10.5 x 2
JIS B 2401 P5
35 x 31 x 2
Diaphragm assembly
Valve assembly
Valve spring
Valve O-ring
O-ring
O-ring
Regulator
End plate REnd plate L
O-ring
O-ring
ARM2500-A-02
ARM2500-B-02
ARM3000-A-03
13636A
136312 136412
13646A13636B(ExceptO-ring)
13646B(ExceptO-ring)
ARM3000-B-03
Common IN
Individual IN
Common IN
Individual IN
e
r
t
y
u
i
Regulator
End plateassembly
Bracketassembly
Construction
Bra
cket
Bra
cket
Bracket ABracket B
Hex. socket head cap
screw
Bracket ABracket B
Hex. socket head cap
screw
22
1set
1set 2
How to order(1) When adding n stations to ARM - ∗∗ • Regulator n pcs. • Bracket assembly n pcs.(2) When regulators, end plate assembly and bracket assembly are assembled to make the manifold of n stations. • Regulator n pcs. • Bracket assembly n pcs. • End plate assembly 1 pc.
25003000
AB
Common IN
Common IN Common IN
Individual IN
Individual IN Individual IN
14-4-57
Series ARM2500/3000Manifold Regulator Modular Style
Dimensions
ARM2500ARM3000
A
6
7
17
21
44
54
56
68
42
55
126.5
153.5
58
70
45
53
17
23.5
21
27.5
38
48.5
42
55
29
35
48
59
68
85.5
33.5
42.5
B C D E F G H I J K L M N O PSymbolModel
ARM2500
ARM3000
Symbol
L1
L2
L3
L1
L2
L3
118
106
84
152
138
110
2
160
148
126
207
193
165
3
202
190
168
262
248
220
4
244
232
210
317
303
275
5
286
274
252
372
358
330
6
328
316
294
427
413
385
7
370
358
336
482
468
440
8
412
400
378
537
523
495
9
454
442
420
592
578
550
10Model
Dimensions
Manifold stations
Dimensions by the Number of Stations
∗ For products with pressure gauge, pressure gauges are shipped together with product.
Pressure gauge (Option) Pressure gauge (Option)
(With
pre
ssur
e ga
uge)
Panel mounting hole
IN (Common IN)
IN (Individual IN)
Gauge port
Series ARM2500/3000
14-4-58
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Direct Operated Precision RegulatorModular Style
Series ARP3000
Port size
Fluid
Proof pressure
Maximum operating pressure
Regulating pressure range
Setting sensitivity
Repeatability
Air consumption Note)
Pressure gauge port size
Ambient and fluid temperature
Construction
Weight (kg)
Air
1.2 MPa
0.8 MPa
0.005 to 0.3 MPa
0.001 MPa
±0.003 MPa
4 to 6 �/min (ANR) (0.3 MPa)
–5 to 60°C (No freezing)
Bleed type
0.42
How to Order
Standard Specifications
Description
B320
G36-4- 01
Accessory (Option)/Part No.
ARP3000-02
ARP3000-02BG
ARP 3000 BG
Direct operated precision regulator
R02
Thread typeAccessory
OptionNone
Port size41
Pressure gauge (1)
Bracket
0.4 MPa
Part no.
Note) Air consumption differs depending on the set pressure.
( )
Model ARP300041
81
NilNF
RcNPT
G
02
BG
Nil NoneWith bracket
With pressure gauge
Nil
R
JIS Symbol
� Setting sensitivity: 0.001 MPa� Can be connected as a
module to a mist separator.AFM30 + ARP3000AFD30 + ARP3000
� Direct-driven, bleed type (With relieving function)
Note 1) • � in the gauge part no. indicates the threads used for connection. For Rc, leave the symbol blank, and for NPT, enter “N”'.
• Please contact SMC concerning the supply of NPT pressure gauges.Note 2) Use caution not to tighten excessively when mounting a pressure gauge, otherwise
it will may result in a breakdown. (Fastening torque recommended: 7 to 9 N·m.) For sealing, use a pipe tape.
∗ Pressure gauges are shipped together with regulator, (but not assembled).
Reverseflow
14-4-59
Dimensions
Construction
Set nut: Width across flats 50
No. Description Material Note
q
w
e
r
t
y
u
i
o
!0
Body
Bonnet
Aluminum die-casted
Aluminum die-casted
Platinum silver painted
Black painted
No. Description Material Part no.
Diaphragm assembly
Valve assemblyValve springValve mini Y packingO-ringO-ringHandleSet nut
Weather resistant NBR
Brass, HNBRStainless steel
NBRNBRNBR
PolyacetalZinc die-casted
1315510A
1315506A1315516-2
MYN-5JIS B 2401P6
1315451315513131532
Component Parts
Replacement Parts
CautionSelection Air Supply
Orange mark
1. Release the lock to adjust the pressure. After the adjustment, engage the lock.Failure to observe this procedure could damage the handle or cause the outlet pressure to fluctuate.1) Pull the adjustment handle to
release the lock. (An orange colored line is provided at the bottom of the adjustment handle for visual checking.) Push the adjustment handle to engage the lock. If it does not lock easily, turn the handle slightly clockwise or; then, push it until the orange colored line is no longer visible.
2) Install the valve guide (on the opposite side of the handle) 60 mm away from the ground surface.Maintenance and inspection will be facilitated.
3) Air is normally released from the bleed hole. This is necessary for direct-operated precision regulator construction.
4) Please contact SMC if this product is to be used between solenoid valve and actuator.
5) Fasten the main body with a set nut tightly and fix it.Recommended torque for set nut: 22.5 ± 4.5 N·m
1. Set the output pressure to 90% or less of the inlet pressure.Failure to observe this procedure could result in an excessive pressure drop.
1. Use a mist separator on the inlet side. If the air contains drain or debris, it could clog the bleed holes and lead to a malfunction.
2. Do not use a lubricator on the inlet side because it could clog the bleed holes and lead to a malfunction.
Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions.
JIS Symbol
Always bleeding
Panel mounting hole
Pressure gauge port size
Thickness max. 3.5
Pressure gauge(Option)
Port size
M42 x 1.5(Thread size)
Bracket(Option)
Pressure Characteristics
Flow Characteristics
Inlet pressure: 0.5 MPaOutlet pressure: 0.2 MPaFlow rate: 0 �/min (ANR)
Inlet pressure: 0.7 MPa
Out
let p
ress
ure
(MP
a)O
utle
t pre
ssur
e (M
Pa)
Inlet pressure (MPa)
Set pointSet point
Flow rate (�/min (ANR))
∗ For products with pressure gauge, pressure gauge is shipped together with product.
Precautions
Warning
Caution
Series ARP3000
14-4-60
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
��� ��� ���� ���� � ��� ���� ��������
Regulator for 2 MPa
Series ARX20
� Compatible with inlet supply pressure of 2.0 MPa
� Compact type (face to face dimensions 35 mm,
overall length 80 mm)
� Piston type
� 3 out ports for convenient use
� Employs a handle shape for easy operation
� Ideal for discharge pressure adjustment on a
small compressor
� Ideal for pressure adjustment of air blowing
applications
14-4-61
How to Order
RcNPT
G
1348112G36–10–01G46–10–02G36–4–01G46–4–02G36–P10–N01G46–P10–N02G36–P4–N01G46–P4–N021348110A
Bracket
None
Panel nut
∗ Panel nut is also included with B.
Note 1)
Nil
NF
Thread type
1/81/4
0102
BNil
G Pressure gauge
ARX20–N��
ARX21–N��
ARX20– ��NilF
ARX21– ��NilF
PPort size
0.05 to 0.85 MPa0.05 to 0.30 MPa
01
Regulating pressure range
Regulator for 2 MPa Option
Option combination numbers
Regulator for 2 MPa
Series ARX20
BGP
BGGP
ARX2 0 01
Specifications
ARX20
Piston type regulator
Relieving type
Rc 1/8, 1/4
Rc 1/8, 1/4
3.0 MPa
2.0 MPa
0.05 to 0.85 MPa
0.05 to 0.3 MPa
Air
–5 to 60°C (No freezing)
110 g
Regulator construction
Relief mechanism
Port size
Pressure gauge port size
Proof pressure
Maximum operating pressure
Regulating pressure range
Fluid
Ambient and fluid temperature
Weight
Standard type
Low pressure type
JIS Symbol
Note 1) Compared with ARX20, ARX21 is the product which adjusting spring has only been changed.
It is not the product, which does not allow the pressure more than 0.3 MPa.
Note 2) Pressure gauges are shipped together, (but not assembled).
(2)
Model
14-4-62
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Flow Characteristics
Pressure Characteristics
Inlet pressure: 2.0 MPa
Inlet pressure: 2.0 MPaOutlet pressure: 0.3 MPaFlow rate: 60 � /min (ANR)
Inlet pressure: 2.0 MPaOutlet pressure: 0.8 MPaFlow rate: 60 � /min (ANR)
ARX20-01
ARX21-01 ARX21-02
ARX20 ARX21
ARX20-020.900.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
00 100 200 300 400 500 600 700 800 900 1000
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
Flow rate (� /min (ANR)) Flow rate (� /min (ANR))
Flow rate (� /min (ANR)) Flow rate (� /min (ANR))
0.35
0.30
0.25
0.20
0.15
0.10
0.05
00 50 100 150 200 250 300 350 400 450 500
Out
let p
ress
ure
(MP
a)
Out
let p
ress
ure
(MP
a)
0.890.88
0.87
0.86
0.85
0.84
0.83
0.82
0.81
0.800
0.90 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2
Out
let p
ress
ure
(MP
a)
Inlet pressure (MPa) Inlet pressure (MPa)
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
00.90 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2
Out
let p
ress
ure
(MP
a)
0.35
0.30
0.25
0.20
0.15
0.10
0.05
00 50 100 150 200 250 300 350 400 450 500
0.900.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
00 100 200 300 400 500 600 700 800 900 1000
Set pointSet point
Set pointSet point
14-4-63
Regulator for 2 MPa Series ARX20
Construction
Dimensions
JIS Symbol
No.
q
w
Description Material
ADC
POM
NoteBody
Bonnet
No.
e
r
t
y
u
Description Material
POM
POM, NBR
Brass, NBR
Stainless steel
Steel wire
Part no.Handle
Piston assembly
Valve
Valve spring
Adjusting spring
1348102#1
1348104A
1348105
1348109
1348108 (For 0.85 MPa)
1348108-1 (For 0.3 MPa)
Component Parts Replacement Parts
Panel cutout dimensions
SUP OUT
SUP OUT
�35
54
12
25
OUTOUT
AA
ø37
44
5.4
1.6
(Max
. thi
ckne
ss 4
.5)
SMC
P U S H L O CK
ø26
R2.5
1031
.5
79.5
(W
hen
regu
latin
g pr
essu
re =
82)
q
w
e r
u
t
y
Series ARX20
14-4-64
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE�
VY1
G
PPA
AL
Option
Panel NutPart no.
Material
1348110APOM, NBR (Gasket)
Dimensions
∗ Install the gasket underneath the panel and bracket (bonnet side). Tighten the panel nut by hand without the use of tools.
BracketPart no.
Material
1348112SPCC (Black zinc chromated)
Dimensions
41.5
17
1.6
5.4
111.
5
Max
. pan
elth
ickn
ess
4.5
mm
1225
ø26
ø34
R16.5
4-R2.5
ø24
54
2444
Panel nut
Gasket
1. Confirm the regulating pressure range. Be sure to install safety devices in locations where output pressure above the regulating pressure range can lead to damage or malfunction of equipment in the outlet pressure side.
2. Residual pressure relief without supply pressure.In cases where the supply pressure is removed with the downstream pressure in a low pressure setting state, it may not be possible to eliminate the downstream pressure (residual pressure relief). Provide a residual pressure relief circuit for cases in which reliable elimination of downstream pressure must be performed.
Design and Selection
Warning1. To set the correct pressure
1)Set the pressure by increasing from a lower pressure to the desired setting, and lock the handle after the pressure is set.
2)Make connections after confirming the “SUP” mark which indicates the air inlet. Reversed connections will cause malfunction.
Mounting
Caution
Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety Instructions and Common Precautions.
Precautions
14-4-65
Regulator for 2 MPa Series ARX20