· cle;,nup _ ved_ fo)der ;sfter this many d;sys ЗО : ... schedule causes running of the job...
TRANSCRIPT
3. Additional Options
3.1 Deletion Propagation
3.2 Version Control
3.3 Parallel treads
3.4 Bandwidth Throttling
3.5 Filtering
3.6 Automation
3.7 Conf1ict Resolution
3.8 Notifications
3.9 ACL Permission Propagation
3.10 Сору Locked Files using VSS
3.1 Deletion Propagation
Job Options > General
(Worcstation 1 BackupJ Options
Job type and file deleting
Job Туре: l6ackup left to Right (1-way) ...,. j
( [iJ Propat;iate Oe!etions )
пj
Т Fi!ters
0 Auto
(i Scripts
О Advanced
1� Left Side
Г Right Side
ON in 1-way job: If а file or folder has Ьееn deleted Ьу user оп the source side, GoodSync will delete it on the destiмtion side. ON in 2-way job: If а fi!e or folder has Ьееn deleted Ьу user оп one side, GoodSync will de!ete it оп the other side when doing Sync. OFF in l·way jobs: deletions оп source side are turned into excluded items. OFF in 2-way jobs: not i!illowed.
Qpen Proaram Ootions
Display Ьalloon memges: j Оп Conflicts and Errors ..... j
r] Create left/right Syl"IC folders if they are not found.
Recycle bin � Save deleted/replaced fi !es, !;sst ver.sion only
� Cle;,nup _�ved_ fo)der ;sfter this many d;sys ЗО :
Е] S;sve deleted/repl;sced fi !es, mu1tiple versions
Е] Cle;,nup _history _ folder ;sfter this mi,ny di,ys 30 :
Total sec:onds for Rec:onnect i,ttempts 120 :
С] Run Pi,ri,llel Thre;sds in Sync, this mi,ny: О :
Speed l imit
File Сору Speed Limit in KByte/s, Down
File Сору Speed Limit in KByte/s, Up
о:
о :
3.2 Version Control
Job Options > General
{Worc:station 1 B.кlrup] Options
Т filters
0 Auto
i] Scripts.
Q Advanced
+ Left Side
;- Right Side
Job type and fi!e deletinQ
Job Туре: \&ckup Left to Right (l·way} .... 1
Ы) Propagate Deletions ON in l·way job: If а file or folder has Ьееn de!eted Ьу user on the source side, GoodSync witl de!ete it оп the destination side. ON in 2-wa1y job: If а file or folder has been deleted Ьу user on one side, GoodSync wil! delete lt on the other side when doiПQ Sync. Off in 1-way jobs: de!etions оп source side. are turned into exc:luded items. Off in 2-way jobs: not allowed.
Display balloon memt;ies: 1 Оп Conflicts i!lnd Errors • 1
О Create !eft/right Sync fo!ders if they are not found.
Recyde Ьin [fJ Save deleted/rep!aced files, l1tst version only
0 C!eanup -�ved_ folder 21fter this many days 30 : � Save deleted/rep!aced files, multip!e versions
[JC!eanup _history_ folder after this many days
Totг1I seconds for Reconnect г1ttempts
О Run Pг1ralte! Threг1ds in Sync, this many:
Speed limit
Fi!e Сору Speed Limit in KByte/s, Down
File Сору Speed limit in KByte/s, Up
30 .
120 :
о :
о :
Versioning can Ье set up in two different modes:
• Save deleted/replaced files, last version only (checked Ьу default)lf checked, then GoodSync saves а file just before replacing this file with а newer version or deletingthis file. The file is saved to _gsdata_ \_saved_ folder on the side of the job where the replacement/deletionis about to occur.
Only the most recent version of the file (the one just before the current version) is retained.
• Cleanup _history _ folder after this many days (off Ьу default, 30 days)
lf checked then remove files that were saved to _gsdata_ \_history _ folder, � specified number of days or more.
lf not checked, then keep files in _gsdata_ \_hist
Note that�_ · 1 en folder, so you must check Show Hidden Rles op1jp · �you want to see contents of this folder.
3.3 Parallel Treads
Job Options > General
(Worcstation 1 BackupJ Options
Т Fi lters
0 Auto
liJ Scripts
О Advanced
1� LeftSide
;- Right Side
Job type i!lnd file deleting
Job Туре: l&ckup Left to Right (l·way) ..... )
� Pro�g1ttl!!- Deletions ON in l·way job: If;, fi!e or folder has Ьееп deleted Ьу user on the source side, GoodSync will delete it on the destinaition side. ON in 2-way job: If а fi!e or folder has Ьееn deleted Ьу user on one side, GcюdSyl'IC will de!ete it оп the other side when doing Sync. OFF in 1-way jobs: deletions оп source side aire turned into exduded items. OFF in 2-way jobs: rюt allowed.
Oisplay ba!loon messages: j On Conflicts and Errors ..... j
[] Crezite left/right Sync folders if they i!lre not found.
Recyde bin [tJ Save deleted/replaccd fi(es, !ast version onty
11] Clezinup _saved_ fo!der after this many days 30 :
L] Save deleted/replaced fifes, multiple versions
1ё] Cleanup _history_ folder aft.er this many days
Total seconds for Reconnect attempts
за .
120:
( [] Run Pa�tlel Threads in Sync, this many: о: 1
Qpen PrQQri!lm ODtюns-
Speed limit
File Сору Speed Limit in KByte/s, Down
file Сору Speed Limit in KByte/s, Up
о: о :
lf checked then run main pass of Sync in this many parallel threads. Using this option speeds up file
transfer for remote servers that have high latency.
lt does not increase speed, if your connection bandwidth is used up Ьу а single-thread sync. lf empty
or 1 then run sync in one sequential thread.
Examples of when it helps: many small files uploading to FТР or SFТP server.
Example of when it does not help: several large files uploaded to GSTP or SЗ or FТР serve
3.4 Bandwidth Throttling
Job Options > General
(Worcstation 1 SackupJ Options пj
Т Fi!ters
0 Auto
[i
Scripts
О Advanced
1� Left Side
;;- Right Side
Ooen Proari3m Ootions
Job type and file deleting
Job Туре: l�ckup Left to Right (1-way) ..... j
� Propai;iate Of!!etions ON in 1-way job: If а fi le or folder has Ьееn deleted Ьу user оп the source side, GoodSync will delete it оп the destiмtion side. ON in 2-way job: If а fi!e or folder has Ьееn deleted Ьу user оп one side, GoodSync wi!I de!ete it оп the other side when doing Sync. OFF in l·way jobs: deletions on source side are turned into excluded items. OFF in 2-way jobs: not a!lowed.
Display balloon mes.sages: j Оп Conflicts <Snd Errors ..... !
!С:] Create left/right Sync folders if they are not found.
Recyde bin � Save deleted/replaced fi!es, 1ast version only
� Cleanup _�ved_ folder .sfter thi$ m;sny d;sys
Е] S;sve deleted/repl;sced files, mu1tiple version$
� Cle;snup _history _ folder ;,fter this m;,ny d;,ys
Tot;sl seconds for Reconnec:t ;,ttempts
� Run Pi!lr;,llel Тhre;,ds in Sync, this m;,ny:
[
Speed limit
F:le Сору Speed Limit in KByte/s, Down
F1le Сору Speed Limit in KByte/s, Up
за
30
120
о � ]
This limits file сору speed Ьу the speed in KByte/sec specified in this option.
Separate Download and Upload limits are provided.
lf Download limit is zero, then it is assumed to Ье the same as upload limit.
3.5 Filters
Job Options > Filters
[Worcstation 1 B.кk.up] Options
J.-; Generzil Choose files to Ье inc!uded or excluded from synchronization.
0 Auto
[i Scripts.
О Adv;,nced
+ LeftSide
+ RiQht Side
lrJ Exclude empty folders
[iJ Ex.clude Hidden files and folder.s
� Exclude System files o,nd folders
Ooen Prparzim Qptюns
Exclude (empty Ьу default)
+-
+ - 11
Files and folders that match any line on this list, will Ье excluded from synchronization.
Details are provided in the Exclude Filters Section.
lnclude (empty Ьу default)
lf not empty then only files and folders whose names match one of the lines of this lnclude list and do not match any lines of the Exclude list, are included in synchronization.
Details are provided in the lnclude Filters Section.
lt is recommended for the set of inclusions and exclusions to Ье the same for all jobs that sync with one particular folder. Keeping them different is possiЫe but it is likely to cause confusion as some jobs will not sync files that other jobs would sync.
Exclude Empty Folders (un-checked Ьу default)
lf checked then Exclude folders that are empty or that contain only emr;3ty fo ders. Folder are considered empty if they contain no files or if they contain only files ..-n...,.,._,...-,еге excluded Ьу Filters.
Exclude System Files and Folders (checked Ьу default)
Exclude files and folders that have SYSTEM attribute.
3.6 Automation
Job Options > Auto
[Worc:station 1 8;,ckupJ Options
/f General Auto Analyze and Sync
Т Fi!ters
1iJ Scripts
о Ad\li'.IПCt!!d
+ LeftSide
Aмlyze Sync On file Change* [J Delay О sec:.
Оп folders Connect rJ �
Оп GoodSync start l!J 1!] Delay О sec.
Periodically
Оп Logoff
Оп Schedule
[) ::J Every 2 h. О min.
!:J [j U �riri:_oure ••. 1
;- Rioht S•d• '-. W-o'1<s - fo,-loc, -lhost- ,nd-Gooc__,Sync Connect only.
Run mode ( О Run without User Interface (Uмttern:led) ]
дdvanccd Auto options
Q�n proqrj!lm Qptlon,s
[i:] Do not Sync if chanoed files more than
[1]Wi!lit for Locks to dear, minutes
Automatici!llly reso!ve conflic:tsj-Do �Not Со�ру�• 1
E]Conflict Resolution: Ren.-.ime Losino File, rюt Delete
l:]дuto Cle11r t� tree ;,fter Analyze/Sync has finished
50 %
Неге we will define the automated process that will trigger our data backup.
• On File Change (Real-Time): Analyze and Sync this job when any file changes in left or right sync folder
or its sub-folder.
• On Folders connect: Analyze (and maybe Sync) this job when both folders of the job become connected
, after they were previously disconnected.
• On GoodSync Start: Analyze (and maybe Sync) this job when GoodSync starts.
• Periodically: Analyze (and maybe Sync) this job periodically, every Н Н hours and ММ minutes.
• On Logoff: Analyze and then Sync this job just before Logoff from Windows.
• On Schedule: Analyze (and maybe Sync) this job periodically, on а Schedule--set Ьу Configure button.
Schedule causes running of the job when all specified time uni Yalt:1es match current time.
These time unit values can Ье specified:
- Minute (О to 59),
- Hour(Oto 2
- ау of Month (1 to 31).- Month (1 to 12),
- Оау of Week (O=Sun to 6=Sat)
Run Without User lnterface (Unattended)
lf checked, then this job will run in GoodSync Runner Service, without User lnterface. So the job will auto-start and run even when you are logged off.
3. 7 Conf1ict Resolution
Job Options > Auto
Only for Synchronization Jobs
{WOfc:st.stion 1 B.кlrup] Options
� Generi'II
Т filters
[i Scripts
Q Advllnced
+ left Side
Auto An21!yze and Sync
Aмlyze Sync
Оп Fi!e Change• !С} Del;,y О sec.
Оп Folders Connect Е] [j
Оп GoodSync sti,rt � rJ De!ay О sec.
Periodically � [] Every 2 h. О min.
Оп Logoff 1::1 Оп Schedule
;- Rii;iht Sidl!' * Works for !ocalhost and GoodSync Connect only.
Qpen Prpqr;;m Qpt!ons
Run mode
(] Run without User Interface (Unattended)
Advi'lnced Auto options
11) Do not Sync if cl,;,nged files more than
0 W;,it for locks to cleair, minutes
[ Automatically resol\le conflicts I Do Not Сору ....-J
1 �Conflict Reso!ution: Rename Losing Fi le, not Oe!ete
[]дuto C!ear the tree ;,fter An;,lyze/Syr'IC hc,s finished
50 "·
When synchronization job is about to Ье executed automatically, use this option to automatically resol
conf1icts:
Оо Not Сору (default value)
Leave Conf1icts in unresolved (Оо Not Сору) state.
Left Side Wins
Resolve to Le to.Ri��
Right Side Wins
Resolve to Right to Left propagation.
Newer File Wins
File with the most recent modification date wins.
You must not use this option for backup jobs, use 1-way job instead:
Backup job must Ье 1-way job, not 2 way job with AutoResolve confiicts.
Option: Confiict Resolution: Rename Losing File, Not Delete
lf Automatically Resolve Confiicts option is enaЬled then do not delete file that loses as а result of
confiict resolution. lnstead rename it to 'FileName (Confiicted Сору from COMPUTER on
DATE).ext'.
3.8 Notifications
ln GoodSync Enterprise notifications are done through scripting. Scripts allow us to send notification emails, to log data backup results, or to write logs to а client's database.
Click here for detailed notification setup tutorial.
3.9 ACL Permission Propagation
Job Options > Advanced
[Worcstation 1 8ackupJ Options
Jd Gener;,I
Т Filter.s
0 Auto
Sync � Сору File Cre1ttion Time
[tJ Сору AttriЬutes
(0 Сору ACL and File/folder Owner )
EJ Сору File/Folder Owner
-�
---
-Move Mode: Delete Source ;,fter Сору
Move Mode: Delete Empty folders l!lfter Сору
[11 Сору !ocked fi!es us.ing VSS sмpshots
;- Right Side
Qpen Proarгim Ootюns.
Е1 Retry Sync if .source file changes Ьetween Anzilyze i!lnd Sync
Aмlyze
1[] Com�re Checksums of file Вodies, Verify CheckSum after Syl"IC
EJ Compare Attributes
Compare ACL ;,пd o .... ner
RJ Detect File and Fo!der Move.s and Renames
� UЬer-unlocked mode: source files m;,y Ье deleted during up!oгd
� E�imate disk space reQuired for Sync
SymЬolic links and Junc:tions: 1 Ignore
а) Сору as is
Drill down
Under GoodSync Job Advanced option we can manage ACL permission propagation.
Сору ACL Security Attributes (un-checked Ьу default) lf checked then сору Access Control List (ACL) and File Owner of the file or folder when it is being copied Ьу GoodSync. Windows: lf Сору ACL is On then File Owner is also copied. Мае OS: this option works too, for Мае ACL.
Oetect ACUOwner change even when file is the same (un-checked Ьу default) lf checked then change in ACL or File Owner are detected even when file body does not change. lf not checked then ACL and File Owners are copied only when changed file is copied.
3.10 Сору Locked Files using VSS
Job Options -> Advanced
(Worcstation 1 BackupJ Options
JJ General
Т Filters
0 Auto
Ji Scripts
+ LeftSide
� RiohtSide
Qpen Prpgro,m OPtlOrtS
Sync Е1 Сору File Creation Time
[l] Сору Attributes
EJ Сору ACL and file/Folder Owner
1!:1 Сору File/Folder Owner
Move Mode: Delete Source after Сору
Move Mode: Delett: Empty Folders i!lfter Сору
(RJ Сору !ocked files using VSS snapshots]
[j Retry Syn<: if source file chanoes Ьetwl!:en Analyze and Sync
Analyze
EJ Compare Check:$ums of File Вodies, Verify CheclcSum 21fter Sync
Com�re Attributes
Compare ACL аМ Owner
[1] Oetec:t Fi!II!- ;snd Folder Moves- мd Reмmc:.s
EJ Uber-unlocked mode: sourcc: files may Ье de!eted during uploi!ld
\i] Estimate disk space required for Sync
SymЬolic links and Junctions: Ignore
� Сору as is
Orill down
lf On then сору from locked files using Volume Shadow Servic�V-Sst lf Off then return Cannot Сору Locked File error fo Gekec:J files.
On 64-bit Windows ХР, Vista and 7 you must use GoodSync 64-bit ver$il�t,)f;�CGoodSync can сору only FROM а locked flle and never ТО а loc!<m GoodSync can сору only from locked flle оп local disk, never from а