¦ connecting¦a¦av¦device -...

English -4

¦¦ Connecting¦a¦AV¦device

W

R

Y WR

WR

GB

R

RBG

YW

R

HD¦connection

DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)

Using an HDMI CableHDMI OUT

VCR/Device

Using a Scart Cable

EXT

W

R

Y WR

WR

GB

R

RBG

YW

R

HD¦connection

DVD / Blu-ray player

Using an HDMI to DVI CableDVI OUT

AUDIO OUT

Component connection

VCR, DVD, Blu-ray player, cable box, STB satellite receiver

Using a Component Cable

AUDIO OUTCOMPONENT OUT

VCRAUDIO OUTVIDEO OUT

Using an Audio/Video Cable

[QSG]BN68-02806A-00Eng.indd 1 2010-03-25 오후 2:31:03

¦¦ The¦Supplied¦Accessories

y Remote Control & Batteries (AAA x 2) y Owner’s Instructions

y Cleaning Cloth

y Blanking Bracket & Screw (X1) y Holder-Wire stand

y Cable Tie y Holder-Wire (3EA) y SCART Adapter

y Component Adapter y AV Adapter y Ferrite Core (2EA) y Ferrite Core (2EA)

✎ Ferrite Core: The ferrite cores are used to shield the

cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

Distance between the ferrite core and one end of the cord put into the TV set.

AB

y A : below 50 mm y B : below 20 mm

See separate guide for installing the stand.

s s

s

s

s

y Stand (1EA) y Guide Stand (1EA) y Screws

Plasma TVQUICK SETUP GUIDE

English - 1

BN68-02806A-00

(M4 X L12)

5EA (M4 X L12)

5EA (M4 X L10)


¦¦ Installing¦the¦Stand

✎ Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models (Depending on the model)

Step¦1.¦ Attach your PDP TV to the stand.

✎ Two or more people should carry the TV.

✎ Make sure to distinguish between the front and back of the stand when assembling them.

✎ To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.

Step¦2.¦ Fasten two screws at position 1 and then fasten three screw at position 2.

✎ Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to one side.

¦¦ Using¦the¦remote¦control¦buttons

¦¦ Installing¦Batteries¦in¦the¦Remote¦Control

✎ NOTE

x Use the remote control within 23 feet from the TV.

x Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.

x The colour and shape may vary depending on the model.

English - 2

RETURN ButtonReturn to the previous menu.

ENTERE / DIRECTION ButtonsMove the cursor and select an

item. Select the currently selected item. Confirm the setting.

EXITExit the on-screen menu.

MENU ButtonDisplay the main on-screen menu.

CH LIST

MUTE

POWER

SOURCE

PRE-CH

MENU

TOOLS

RETURN

AD P.SIZE SUBT.

DUAL

EXIT

INFO

TTX/MIX

A B C D

[email protected]

CONTENT GUIDE

ON/OFF

I-II

s

s

s

s

s

1

2

Preset Step¦1 Step¦2

s s

s

s

s

Rear

Front ss

s

s

s s

Top View


English - 3

¦¦ Plug¦&¦Play

When the TV is initially powered on, basic settings proceed automatically and subsequently.If you want to reset this feature, press the MENU button to display menu.You can set the Plug & Play by selecting ‘Setup → Plug & Play’.

On the screen, you can set as follows.

✎ The each step may vary depending on the Antenna source.

ANT OUT

VHF/UHF Antenna

or

Cable

Step 1 Step¦2 Step¦3

Step¦4 Step¦5 Step¦6

Step¦7 Step¦8

Plug & Play

Select the OSD Language.

Menu Language : : English

▲

NederlandsEnglishEesti

▼

U Move E Enter

Plug & Play

Select Country.

Country :

▲

TurkeyUnited KingdomEstonia

▼

U Move E Enter

Plug & Play

Enjoy your TV.

OK

Plug & Play

Select the usage mode.

Store Demo Home Use

Previous U Move E Enter

Plug & Play

Antenna Source : Air ►Channel Source : Digital & Analogue

Previous Skip U Move E Enter

Serch

Plug & PlayAuto Store in progress.Channels : 7

15%

Digital 2TV:2 Radio:0 Data/Other: 0

Analogue 0

E Enter

Stop

Plug & Play

Set the Clock Mode.

Clock Mode : Manual ►

U Move E Enter

AutoManual

Plug & Play

How to get the best perfotmance from your new HDTV1/2

Step 1. Connect the HD Box to the using HDMI or Componentcables.

TV rear view ►

HDMI Cable

HDMI Cable

Previous Skip ► Next


¦ connecting¦a¦av¦device -...

Documents