ventuzecreated date: 10/15/2013 4:43:17 pm

88
www.fipa.com 2013.2014.Sheet metal | English FIPA Sheet Metal Handling

Upload: others

Post on 27-Oct-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: VentuzeCreated Date: 10/15/2013 4:43:17 PM

www.fi pa.com

2013.2014.Sheet metal | English

FIPA Sheet Metal Handling

Page 2: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Editorial | Only those who think ahead stay ahead

Competence Sheet Metal Handling

FIPA GmbH specialises in developing and selling high-quality products, innovative material-fl ow and “pick &

place” system solutions.

At FIPA, quality means – above all – developing products and solutions that are precisely adapted to the

customer’s requirements. That is why we apply not only standard components but also highly customised

individual solutions. FIPA experts are ready to serve you with advanced application know-how, professional

project management and innovative approaches.

FIPA accepts the challenge of fi nding solutions where others have already given up.

This customer-oriented approach to quality also means that you can choose from modular products to put

together the excact solution you are looking for.

It should come as no surprise that FIPA also provides its customers with equally effective service.

FIPA has long been an internationally oriented company with more than just a fi rst-class line of products.

Thanks to a large sales network, FIPA can be where its customers are. FIPA will provide you with the service and

technical support that you expect from a long-term partnership.

In this catalogue you will fi nd a wide selection of components for handling any type of workpiece, even those

with complex shapes.

We invite you to look through this catalogue and get to know FIPA’s products. You will fi nd what you are looking

for. We promise. Because even if “your” product is not in the catalogue, all you need to do is call us. And FIPA

will develop it for you.

Best regards,

Rainer Mehrer, Chief Executive Offi cer

Page 3: VentuzeCreated Date: 10/15/2013 4:43:17 PM

1www.fi pa.com

Content | Summary

FIPA full product line

FIPA industrial solutions

Overview of materials

Proper storage of elastomers

2

5

6

7

Vacuum cups 8

Joints, Spring levelers 30

Magnetic grippers 34

Vacuum grippers 38

Parallel grippers 40

Grippers 46

Vacuum generation 50

Control technology 70

System monitoring 71

Valve technology 76

Vakuum fi lters 80

Request for quotation

Questonnaire F100 - Vacuum technology

83

84

Page 4: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 02

Service> It‘s part of the

package at FIPA.

The FIPA full product line

Criteria that affect quality, such as choice of materials and strength,

can be taken for granted nowadays. At FIPA, we focus more on

offering the right solution for every requirement.

Expertise in gripper and vacuum technology for sheet metal

processing

As a system provider, FIPA covers the entire process chain for

sheet metal processing, from vacuum generation, through system

peripherals, to the ideal vacuum cups for your product.

A wide range of vacuum pumps and ejectors are available for

optimum vacuum generation.

Highly effi cient compact or multi-chamber ejectors provide a stable

vacuum for the vacuum cups.

This allows very short cycle times and pressurized air savings up to

99% to be achieved in industries such as sheet metal pressing and

shell construction.

On request, FIPA also manages projects for entire vacuum systems.

FIPA offers the widest range of vacuum cups in the world - perfectly

tailored to the needs and application areas found in various different

industries. Dynamic sheet handling processes are possible with

specially designed suction cups that are made from oil-resistant

materials and feature anti-slip cleats. In addition to this, FIPA produces

suction grippers tailor-made to customer requirements.

There is also a wide range of magnetic or parallel grippers and jaw

grippers available for sheet handling. Specially developed rubber tips

protect the workpieces during handling.

Whatever the industry, FIPA produces complete gripper and vacuum

systems that are tailored to customer requirements.

The high level of compatibility also allows third-party systems to be

quickly and easily optimized with quality FIPA products.

FIPA full product line:

Generating

Generating

Regulating

Filtering

Controling

Checking / Monitoring

Suction

Vacuum technology> Request a catalogue now on www.fi pa.com

>Request a vacuum cup catalogue now www.fi pa.com

Page 5: VentuzeCreated Date: 10/15/2013 4:43:17 PM

3www.fi pa.com

The FIPA full product line

Expertise in End-of-Arm-Tooling

For the proper functioning of cups and gripper systems, it is crucial that

all components work together perfectly.

FIPA components therefore focus on effi ciency, strength and saving

space. They are developed in close collaboration with our clients,

on the basis of extensive testing and always with an eye on market

requirements.

Service as a company principle

FIPA is characterized by a strong service culture in combination with

professional project management. Our Technical Sales Team will

provide you with expert practical advice in all questions relating to

the product range, application options, system integration and system

project management.

In order to provide the optimal range of products, the FIPA experts

test and improve your sample parts in practical situations in our own

laboratories.

FIPA - your partner when it comes to material fl ow

FIPA listens to its clients carefully and fi nds the right product

or individual, tailor-made system solution for your application.

FIPA full product line:

Fixing

Cinnection

Gabbing

Changing

Gripping

Gripping

End-of-Arm-Tooling> Request a catalogue now on www.fi pa.com

Combine and extend our products as you wish: a system that meets your requirements.

Page 6: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 04

Notes

Notes:

Page 7: VentuzeCreated Date: 10/15/2013 4:43:17 PM

5www.fi pa.com

FIPA industrial solutions | For all industries

Our material flow specialists are familiar with many industries:

> Automotive

> CD & DVD Industry

> Plastics Industry

> Food & Beverages Industry

> OEM Machines and Automation

Integrators

> Packaging Industry

> And many more ...

Whether you require a standard product, a modifi cation, or an individual

solution: FIPA will provide the right product and the ideal system solution for

your industry. Our modular product range, proven design expertise, extensive

practical experience, and best-practice philosophy ensure that our clients can

also benefi t from the know-how and innovations of other industries. FIPA

comes with service and reliability included.

Automotive CD & DVD Industry

Robust system solutions for the highest process reliability at maximum mechanical load

Secure, fast handling of smooth, delicate workpieces

Plastics Industry Food & Beverages Industry

Suction, gripping and cutting of a wide range of shapes with fast cycle times

Materials suitable for the food industry for "clean" handling

OEM Machines and Automation Integrators Packaging Industry

Innovative system solutions ideal for any application Wear-resistant products for a long life-time and high output

Page 8: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 06

Overview of materials | Order logic

Overview of vacuum cup materialsOverview of vacuum cup materials

Short designation

Material code

Hardness [Shore A ± 5°]

Commercial designation

Commercialname(example)

Short-term working temperature [°C]

Abrasion resistance

Flexi-bility

Oil-resis-tance

Fuelresis-tance

Ozone and weatheringresistance

Acid resis-tance

Leaching resis-tance

BR-AS 10-AS 60 Butadiene rubber, anti-static -50 / +100 ++ + o o o + ++

CR 9 50 - 60 Chloroprene Neoprene® –40 / +110 + + ++ o ++ + +

EPDM 15 50 Vistalon® -40 / +130 + ++ o o ++++ +++ +++

FKM 7 65Fluor rubber (FPM)

Viton® –10 / +230 o o ++++ ++++ ++++ +++ +++

Foam rubber 12 ++++

HNBR 14 55Hydrogenated acrylonitrile-butadiene rubber

Therban® -30 / +160 ++ + ++++ ++ +++ + +

NBR 1 50 - 60 Nitrile rubber Perbunan® –30 / +90 + + +++ + o o o

NBR-AS 1-AS 50 - 70Nitrile rubber, anti-static

-30 / +90 + + +++ ++ o o +

NR 4 35 - 45 Natural rubber SMR –40 / +80 ++ ++++ o o o + ++

NR 3 50 - 65 Natural rubber SMR -40 / +80 ++ +++ o o o + ++

PU 5 50 - 65Polyurethane (EU/AU)

Urepan® –20 / +80 ++ + +++ ++ + o o

SBR 13 50 - 60Styrene-butadiene-rubber (SBR)

Buna® -30 / +80 +++ ++ o o + + +

SI 8 35 - 45 Silicone rubber Elastosil® -40 / +200 o ++++ o o +++ o o

SI 2 50 - 65 Silicone rubber Elastosil® -40 / +200 o +++ o o +++ o o

SI-AS 2-AS 50 - 60Silicone rubber, anti-static

-40 / +200 o +++ o o +++ o o

SI-FS 2-FS 40 Fluorosilicone -50 / +190 o +++ + + +++ ++ +++

Tepuflex® 17 50 Thermoplastic elastomer 0 / +60 +++ ++ o o +++ o o

Thermalon® 19 60 0 / +160 ++ + +++ ++ o + +

TPU 18 60Thermoplastic elastomer

Elastollan® 0 / +65 +++ o +++ ++ +++ o +

Varioflex® 16 30/60Polyurethane (2 Shore Hardnesses)

10 / +50 +++ ++++ +++ +++ ++ o +++

Vinyl V 50 - 55 PVC (soft) 0 / +60 +++ ++ + + ++ ++ ++

Vulkollan® 11 75 Vulkollan® -40 / +80 ++++ + +++ ++ +++ + +

++++ = Excellent +++ = Very good ++ = Good + = Fair 0 = Low to satisfactory

Ordering example: Flat vacuum cup made of silicone 50° Shore A

Item No.

102.030.222._* > Add material code > 102.030.222.2

Note!

> Depending on the application, vacuum cups are subject to mechanical and chemical stresses. The data serve therefore only as guidelines. > Special vacuum cups fitted with felt linings are extremely low-marking and can be deployed at temperatures up to a max. of 500 °C > Material colors may change, but the quality remains unaffected.

> Material colors: bg = beige, bl = blue, br = brown, g = green, ge = yellow, gr = gray, or = orange, r = red, sw = black, tr = transparent, w = white

Page 9: VentuzeCreated Date: 10/15/2013 4:43:17 PM

7www.fi pa.com

Proper storage of elastomers

Some elastomer parts are stored for long periods. This can affect product

quality. Changes are the result of individual or combined influences of special factors, such as

deformation, oxygen, ozone, light, heat, moisture, oils and solvents. For this reason,

precautions must be taken to ensure that the service life will not be considerably shortened

by incorrect storage. Storage and the recording of time in storage is governed by ISO 2230 and

DIN 7716.

Heat

> Storage temperature of elastomers should preferably be between +5 °C and 25 °C. > Direct contact with heat sources (such as radiators) or direct sunlight should be avoided. > Storage at low temperatures can cause elastomers to harden. In this temperature range, therefore, moulded parts must be handled with great care to avoid deformations.

Moisture

> Relative humidity in storage areas should be below 70%. Avoid extremely wet or dry conditions. No condensation should be present.

Light, ozone

> Elastomer parts should be stored away from light sources and ozone. In particular, direct sunlight or strong artificial light containing an ultraviolet band should be avoided. The use of individual containers, especially plastic bags, is preferred, provided they are UV-protected.

Deformation

> Elastomer components should be stored free of compressions or deformations and in an unbent state. Items delivered in an unbent state should be kept in their original packaging.

Contact with liquids or grease

> Moulded elastomer parts should not come into contact during storage with solvents, oils or grease, if not already so packed by the manufacturer.

Contact with metal and non-ferrous metals

> Direct contact with certain metals such as manganese, iron, copper and its alloys, e.g. brass, damages some elastomers and should be avoided during storage. > Due to the potential for plasticiser migration or migration of other components, elastomers should not be stored in contact with PVCs.

Length of storage and inspection (empirical values)

The useful life of elastomeric products depends to a considerable degree on the type of elastomer. If the above-mentioned recommendations for storage are observed, the various elastomers can be stored for the times given below:

AU, EU, BR, SBR, NR, thermoplastics 4 yearsNBR, HNBR, CR 6 yearsEPDM 8 yearsFKM, SI, SI-FS 10 years

After the specified time, moulded elastomer parts should be inspected. An extension of shelf life is then possible. Elastomer parts and components less than 1.5 mm thick are more susceptible to attack by oxidation, even when stored under ideal conditions as recommended. The inspection interval should therefore be shorter than indicated above.

Page 10: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 08

Sheet metal handling | Vacuum cupsFlat vacuum cups for dynamic sheet handling - Series SM-F

Flat vacuum cups for dynamic sheet handling - SM-F series

Product Description Advantage

Robust, circular NBR flat suction cups with vulcanized fitting and large area, multi-part “anti-slip” cleats.Various connection threads available. Silicone-free.

> Reliable, non-slip handling of oily sheets due to “anti-slip” cleats. Good absorption of lateral forces

> Supports help to prevent deep-drawing or deformation of thin sheets > Leak-free suction even with slightly curved surfaces due to flexible sealing lip > Vulcanized connection thread ensures a secure fit

Technical DataModel / Lip dimensions

Thread

G1/4-male G1/4-female G3/8-female M10-male M14x1,5-male Rectangular adapter

SM-F-30 103.030.030.1 103.030.031.1 103.030.032.1 103.030.033.1 103.030.034.1 103.030.035.1 3

SM-F-40 103.040.036.1 103.040.037.1 103.040.038.1 103.040.039.1 103.040.040.1 103.040.041.1 4

SM-F-50 103.050.042.1 103.050.043.1 103.050.044.1 103.050.045.1 103.050.046.1 103.050.047.1 5

SM-F-60 103.060.048.1 103.060.049.1 103.060.050.1 103.060.051.1 103.060.052.1 103.060.053.1 6

SM-F-80 103.080.054.1 103.080.055.1 103.080.056.1 103.080.057.1 103.080.058.1 103.080.059.1 7,6

SM-F-100 103.100.060.1 103.100.061.1 103.100.062.1 103.100.063.1 103.100.064.1 103.100.065.1 9,5

SM-F-125 103.125.066.1 103.125.067.1 103.125.068.1 103.125.069.1 103.125.070.1 103.125.071.1 12,5

Dimensions

h1

H

SW

D

dnG2

hg

h1

H

SW

D

dn

G1

hg

Drawing A Drawing B

h1

HSW

D

dn

L

Drawing C "Anti-slip" Cleats (SM-F-100)

NEW

Page 11: VentuzeCreated Date: 10/15/2013 4:43:17 PM

9www.fi pa.com

Sheet metal handling | Vacuum cupsFlat vacuum cups for dynamic sheet handling - Series SM-F

Item no.

Drawing Ø D [mm]

Ø dn [mm]

G1 (female)

G2 (male)

#L [mm]

H [mm]

h1 [mm]

hg [mm]

SW

103.030.030.1 A 30 4 -- G1/4 -- 20 3 10 17

103.030.031.1 B 30 4 G1/4 -- -- 20 3 12 17

103.030.032.1 B 30 4 G3/8 -- -- 36 3 10 17

103.030.033.1 A 30 4 -- M10 -- 20 3 12 17

103.030.034.1 A 30 4 -- M14x1,5 -- 20 3 12 17

103.030.035.1 C 30 4 -- -- 32 23,2 3 -- 17

103.040.036.1 A 40 4 -- G1/4 -- 22 4 10 17

103.040.037.1 B 40 4 G1/4 -- -- 22 4 12 17

103.040.038.1 B 40 4 G3/8 -- -- 38 4 10 17

103.040.039.1 A 40 4 -- M10 -- 22 4 12 17

103.040.040.1 A 40 4 -- M14x1,5 -- 22 4 12 17

103.040.041.1 C 40 4 -- -- 32 25 4 -- 17

103.050.042.1 A 50 6 -- G1/4 -- 28 5 10 22

103.050.043.1 B 50 6 G1/4 -- -- 33 5 20 22

103.050.044.1 B 50 6 G3/8 -- -- 28 5 15 22

103.050.045.1 A 50 4 -- M10 -- 28 5 12 22

103.050.046.1 A 50 6 -- M14x1,5 -- 28 5 12 22

103.050.047.1 C 50 6 -- -- 32 27,5 5 -- 22

103.060.048.1 A 60 6 -- G1/4 -- 31 6 10 22

103.060.049.1 B 60 8 G1/4 -- -- 36 6 20 22

103.060.050.1 B 60 8 G3/8 -- -- 31 6 15 22

103.060.051.1 A 60 4 -- M10 -- 31 6 12 22

103.060.052.1 A 60 6 -- M14x1,5 -- 31 6 12 22

103.060.053.1 C 60 8 -- -- 32 30,5 6 -- 22

103.080.054.1 A 80 6 -- G1/4 -- 35 7,6 10 22

103.080.055.1 B 80 8 G1/4 -- -- 40 7,6 20 22

103.080.056.1 B 80 8 G3/8 -- -- 35 7,6 15 22

103.080.057.1 A 80 4 -- M10 -- 35 7,6 12 22

103.080.058.1 A 80 6 -- M14x1,5 -- 35 7,6 12 22

103.080.059.1 C 80 8 -- -- 32 34,5 7,6 -- 22

103.100.060.1 A 100 6 -- G1/4 -- 36 9,5 10 22

103.100.061.1 B 100 8 G1/4 -- -- 41 9,5 20 22

103.100.062.1 B 100 8 G3/8 -- -- 36 9,5 15 22

103.100.063.1 A 100 4 -- M10 -- 36 9,5 12 22

103.100.064.1 A 100 6 -- M14x1,5 -- 36 9,5 12 22

103.100.065.1 C 100 8 -- -- 32 35,5 9,5 -- 22

103.125.066.1 A 125 6 -- G1/4 -- 43 12,5 10 22

103.125.067.1 B 125 8 G1/4 -- -- 48 12,5 20 22

103.125.068.1 B 125 8 G3/8 -- -- 43 12,5 15 22

103.125.069.1 A 125 4 -- M10 -- 43 12,5 12 22

103.125.070.1 A 125 6 -- M14x1,5 -- 43 12,5 12 22

103.125.071.1 C 125 8 -- -- 32 42,5 12,5 -- 22

Page 12: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 010

* When ordering please add the appropriate material code to the item no. You will find it on page 6.

Sheet metal handling | Vacuum cupsFlat vacuum cups with double safety sealing lips – Series SFU-S

Flat vacuum cups with double safety sealing lips – Series SFU-S

Product Description Advantage

Flat vacuum cups with dual internal safety sealing lip as well as vulcanized carrier plate made of aluminum.

> High process reliability through multiple sealing lip > Excellent lateral stability due to vulcanized carrier plate and rubberized supports

Technical Data

Item no.

Model / Lip dimensions Connection thread

Material / color

150.030.031._* SFU-S-30 M5-female 3 SI (r), CR (sw)

150.050.032._* SFU-S-50 G1/8-female 5,5 SI (r), CR (sw)

150.075.033._* SFU-S-75 G1/4-female 6 SI (r), FKM (sw), CR (sw)

150.100.034._* SFU-S-100 G 3/8-female 9 NBR (sw), SI (tr), NR (w)

150.150.010._* SFU-S-150 G1/2-female 9 SI (gr), CR (gr)

150.225.018._* SFU-S-225 G3/4-female 9,5 SI (gr), CR (gr)

Dimensions

G1

d1

D

h3

H

h1

SW a G1

d1

D

h3

H

G2

SW

l

h1

a

**

Ø 29 | 50 | 75 | 100 mm Ø 146 | 223 mm

a = Vulcanized aluminum carrier plate ** = Vacuum connection possible on the side

Item no.

Ø D [mm] l [mm] Ø d1 [mm] G1 G2 H [mm] h1 [mm] h3 [mm] SW

150.030.031._* 29 -- 10 M5 -- 17,5 7 3 8

150.050.032._* 50 -- 18 G1/8 -- 18,5 7 5,5 14

150.075.033._* 75 -- 22 G1/4 -- 23 8 5,5 17

150.100.034._* 100 -- 30 G 3/8 -- 30 10 9 24

150.150.010._* 146 30 34 G1/2 G1/8 42 15,5 9 27

150.225.018._* 223 50 49 G3/4 G1/8 52 20 9,5 40

Page 13: VentuzeCreated Date: 10/15/2013 4:43:17 PM

11www.fi pa.com

Sheet metal handling | Vacuum cupsHeavy-duty flat vacuum suction plates – Series SFPL-D

Heavy-duty flat vacuum suction plates – Series SFPL-D

Product Description Advantage

Heavy-duty vacuum suction plate for both smooth and rough surfaces. Central drill hole for connecting to the machine – lateral bore for connection to a vacuum source.

> Vulcanized steel carrier plate allows lifting of very heavy loads > Secure gripping of uneven surfaces thanks to additional inner sealing lip > Lateral vacuum connection

Technical Data

Item no.

Model / Lip dimensions Connection thread

Weight [g] Material / color

152.160.127.9 SFPL-D-160 M12-female 9 970 CR (sw)

152.200.128.9 SFPL-D-200 M12-female 9 1741 CR (sw)

152.250.129.9 SFPL-D-250 M12-female 9 2990 CR (sw)

152.300.130.1 SFPL-D-300 M16-female 12 4370 NBR (sw)

152.350.131.1 SFPL-D-350 M16-female 13 6274 NBR (sw)

Dimensions

G1 G2

d1

D

H

h3

a

d2

a = Vulcanized steel carrier plate

Item no.

Ø D [mm] Ø d1 [mm] Ø d2 [mm] G1 G2 H [mm] h3 [mm]

152.160.127.9 160 124 109 M12 G3/8 28 9

152.200.128.9 200 166 146 M12 G3/8 27 7,5

152.250.129.9 250 212 194 M12 G3/8 27 7

152.300.130.1 300 266 248 M16 G1/2 30 8

152.350.131.1 350 316 298 M16 G1/2 30 8

Page 14: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 012

Sheet metal handling | Notes

Notes:

Page 15: VentuzeCreated Date: 10/15/2013 4:43:17 PM

13www.fi pa.com

Sheet metal handling | Vacuum cupsSuction rings, flat – Series SFR

Suction rings, flat – Series SFR

Product Description

Flat suction seals vulcanized on steel ring for handling very large loads. Connection through circular, circumferentially placed thread holes.

Technical Data

Item no.

Model / Lip dimensions

Weight [g] Material / color

152.450.105.1 SFR-450 18 4,4 NBR (sw)

152.540.106.1 SFR-540 18 5,54 NBR (sw)

152.630.107.1 SFR-630 18 6,95 NBR (sw)

152.720.108.1 SFR-720 18 8,25 NBR (sw)

152.920.109.1 SFR-920 18 11 NBR (sw)

Dimensions

d2

d1

D

H

h3

G1

RG1

a

a = Ring made of vulcanized ST 37

Item no.

Ø D [mm] Ø d1 [mm] Ø d2 [mm] G1 H [mm] h3 [mm] R G1

152.450.105.1 450 375 286 8 x M12 50 18 165

152.540.106.1 540 465 375 8 x M12 50 18 210

152.630.107.1 630 556 464 12 x M12 50 18 255

152.720.108.1 720 646 554 12 x M12 50 18 300

152.920.109.1 920 846 754 12 x M12 50 18 400

Page 16: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 014

Sheet metal handling | Vacuum cupsVacuum suction plates with foam rubber sealing lip – Series SP-PLM

Vacuum suction plates with foam rubber sealing lip – Series SP-PLM

Product Description Advantage

Flat vacuum suction plate in round and oval design with a soft, foamed sealing lip made of EPDM. The sealing lip snaps (form-locking) into a support plate.

> Good sealing of heavily textured surfaces > Cost-effective replacement of worn seals

Technical Data

Item no.

Model / Lip dimensions Connection thread G1

Weight [g] Material / color

Flat vacuum suction plates, round

160.042.001.15 SP-PLM-35 G1/8-female 1 22 EPDM (sw)

160.067.003.15 SP-PLM-60 G1/8-female 1 63 EPDM (sw)

160.107.006.15 SP-PLM-100 G1/2-female 1 234 EPDM (sw)

160.145.014.15 SP-PLM-140 G1/2-female 1 588 EPDM (sw)

160.215.009.15 SP-PLM-200 G3/4-female 2,5 1220 EPDM (sw)

160.315.012.15 SP-PLM-300 G3/4-female 2,5 2482 EPDM (sw)

Flat vacuum suction plates, oval

133.111x31.3.15 SP-PLM-110x30 G1/8-female 1 88 EPDM (sw)

133.211x51.4.15 SP-PLM-210x50 G1/2-female 1 310 EPDM (sw)

Accessories

Item no.

Suitable spare cups Suitable touch valves

Flat vacuum suction plates, round

160.042.001.15 102.038.451.15 270.129

160.067.003.15 102.060.452.15 270.129

160.107.006.15 102.100.453.15 270.130

160.145.014.15 102.140.454.15 270.130

160.215.009.15 102.210.455.15 --

160.315.012.15 102.310.456.15 --

Flat vacuum suction plates, oval

133.111x31.3.15 132.106X26.075.15 --

133.211x51.4.15 132.207X47.076.15 --

Page 17: VentuzeCreated Date: 10/15/2013 4:43:17 PM

15www.fi pa.com

Sheet metal handling | Vacuum cupsVacuum suction plates with foam rubber sealing lip – Series SP-PLM

Dimensions

G1

d5

d4

D

H

h3a

b

G1 G2

d5

D

H

h3

a

b

Flat vacuum suction plates, roundØ 35 | 60 | 100 | 138 mm

Flat vacuum suction plates, roundØ 201 | 300 mm

l1

G 1G G 33 G G 22

L

B

l2

H

h3

a

b

Flat vacuum suction plates, ovalØ 201 | 300 mm / 111x31 | 210x50 mm

a = Aluminum b = Sponge rubber EPDM

Item no.

Ø D [mm] L [mm] B [mm] l1 [mm] l2 [mm] Ø d4 [mm] Ø d5 [mm] G1 G2 G3 H [mm] h3 [mm]

Flat vacuum suction plates, round

160.042.001.15 -- -- -- -- -- -- -- G1/8 -- -- 15 7

160.067.003.15 -- -- -- -- -- -- -- G1/8 -- -- 15 7

160.107.006.15 -- -- -- -- -- -- -- G1/2 -- -- 19 7

160.145.014.15 -- -- -- -- -- -- -- G1/2 -- -- 24 7

160.215.009.15 -- -- -- -- -- -- -- G3/4 G1/8 -- 34 20

160.315.012.15 -- -- -- -- -- -- -- G3/4 G1/8 -- 34 20

Flat vacuum suction plates, oval

133.111x31.3.15 -- 110 30 103 80 -- -- G1/8 M5 M5 19 7,5

133.211x51.4.15 -- 210 50 200 160 -- -- G1/2 G1/8 M6 21 7,5

Page 18: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 016

Sheet metal handling | Vacuum cupsOval vacuum suction plates – Series SOPL-S and SOPL-A

Oval vacuum suction plates – Series SOPL-S and SOPL-A

Product Description Advantage

Oval vacuum cups, vulcanized, on a carrier plate of steel/aluminum for the handling of long, narrow products such as profiles, frames or reinforcing sheets. Rubberized support surfaces prevent deformation of the product and increase lateral stability.

> High suction force on a small footprint > Low marking > High process reliability due to vulcanized steel carrier plate > Individual machines connection possible

Ordering notes

Customized drilling patterns available on request for Series SOPL-S

Technical Data

Item no.

Material / color

Weight [g] Model / Lip dimensions Support surfaces

Series SOPL-S: NBR material, grey, with steel carrier plate

9.200x40.010.1 NBR (gr) 9 140 SOPL-S-200x40 lengthwise

9.110x40.009.1 NBR (gr) 9 122 SOPL-S-110x40 lengthwise

9.125x55.012.1 NBR (gr) 9 320 SOPL-S-125x55 lengthwise

9.150x55.013.1 NBR (gr) 7 255 SOPL-S-150x55 lengthwise

9.200x55.014.1 NBR (gr) 7 538 SOPL-S-200x55 lengthwise

9.250x55.016.1 NBR (gr) 8 770 SOPL-S-250x55 lengthwise

9.300x55.019.1 NBR (gr) 8 902 SOPL-S-300x55 lengthwise

9.370x70.022.1 NBR (gr) 10 1895 SOPL-S-370x70 lengthwise

9.200x100.015.1 NBR (gr) 8 595 SOPL-S-200x100 lengthwise

9.280x100.017.1 NBR (gr) 10 1880 SOPL-S-280x100 lengthwise

9.450x130.025.1 NBR (gr) 6 2660 SOPL-S-450x130 crosswise

9.430x180.024.1 NBR (gr) 6 3720 SOPL-S-430x180 selective

9.580x180.029.1 NBR (gr) 10 3500 SOPL-S-580x180 lengthwise

Series SOPL-A: NR material, orange, with aluminum carrier plate

9.100x55.020.4 NR (or) 8 65 SOPL-A-100x55 lengthwise

9.150x55.083.4 NR (or) 8 114 SOPL-A-150x55 lengthwise

9.200x55.020.4 NR (or) 8 159 SOPL-A-200x55 lengthwise

9.300x55.046.4 NR (or) 8 300 SOPL-A-300x55 lengthwise

Page 19: VentuzeCreated Date: 10/15/2013 4:43:17 PM

17www.fi pa.com

Sheet metal handling | Vacuum cupsOval vacuum suction plates – Series SOPL-S and SOPL-A

Dimensions

L

B

l

H

b

h3h3

a

L

B

d1 d1l

H

b

h3l2

bc

Series SOPL-S: NBR material, grey, with steel carrier plate Series SOPL-A: NR material, orange, with aluminum carrier plate

a = Steel b = Aluminum c = Sealed with rubber

Item no.

L [mm] B [mm] l [mm] b [mm] l2 [mm] Ø d1 [mm] H [mm] h3 [mm]

Series SOPL-S: NBR material, grey, with steel carrier plate

9.200x40.010.1 195 36 176 15 -- -- 19 6

9.110x40.009.1 113 43 87 17 -- -- 19 8,5

9.125x55.012.1 126 56 103 33 -- -- 19 6

9.150x55.013.1 151 56 128 33 -- -- 19 6

9.200x55.014.1 200 55 178 33 -- -- 19 6,3

9.250x55.016.1 250 55 228 33 -- -- 19 6

9.300x55.019.1 300 55 227 33 -- -- 19 6

9.370x70.022.1 378 82 349 53 -- -- 26 9

9.200x100.015.1 190 90 161 61 -- -- 22 8,5

9.280x100.017.1 278 100 250 72 -- -- 25 9

9.450x130.025.1 449 131 420 102 -- -- 20 6,5

9.430x180.024.1 430 180 402 158 -- -- 20 6

9.580x180.029.1 579 179 570 150 -- -- 25 9

Series SOPL-A: NR material, orange, with aluminum carrier plate

9.100x55.020.4 99 54 78 33 25 8 22,5 9

9.150x55.083.4 150 55 128 33 40 8 22,5 9

9.200x55.020.4 201 56 178 33 50 8 22,5 9

9.300x55.046.4 300 55 278 33 100 8 22,5 9

Page 20: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 018

Sheet metal handling | Vacuum cupsFlat and bellows vacuum cups – Series SM-P / SM-T

Flat and bellows vacuum cups – Series SM-P / SM-T

Product Description

Flat and bellows vacuum cups of oil-resistant NBR for handling metal sheets. Distinct radially extending cleats prevent “deep drawing” of the product as well as any slipping of oily sheets (Type SM-P). The firmly bolted fitting (from Ø 20 mm) provides a secure seating.Cups typ SM-T is usually installed as a suction plate. It has a special fitting with built-in orifice restriction. This prevents the overall loss of vacuum should some of the cups become uncovered. The deep design of the fitting results in a support that clearly defines the vacuum cup stroke.

Technical Data Accessories

Item no.

Model / Lip dimensions Connection thread Material / color Number of bellows

Spare cup

Flat vacuum cups slip-resistant with female thread – Series SM-PI

100.010.100.1 SM-PI-10 G1/8-female 0,5 NBR (sw) -- 104.010.065.1

100.020.101.1 SM-PI-20 G1/8-female 1,1 NBR (sw) -- 104.020.066.1

100.030.102.1 SM-PI-30 G1/8-female 1,8 NBR (sw) -- 104.030.067.1

100.040.103.1 SM-PI-40 G1/8-female 2,5 NBR (sw) -- 104.040.068.1

100.050.104.1 SM-PI-50 G1/4-female 3,1 NBR (sw) -- 104.050.069.1

Flat vacuum cups slip-resistant with male thread – Series SM-PI

100.010.110.1 SM-PA-10 G1/8-male 0,5 NBR (sw) -- 104.010.065.1

100.020.111.1 SM-PA-20 G1/8-male 1,1 NBR (sw) -- 104.020.066.1

100.030.112.1 SM-PA-30 G1/8-male 1,8 NBR (sw) -- 104.030.067.1

100.040.113.1 SM-PA-40 G1/8-male 2,5 NBR (sw) -- 104.040.068.1

100.050.114.1 SM-PA-50 G1/4-male 3,1 NBR (sw) -- 104.050.069.1

Bellows vacuum cups with a special fitting for sucker plate units – Series SM-T

20.018.125.1 SM-T-18 M8-male 9,5 NBR (gr) 2,5 21.018.118.1

Page 21: VentuzeCreated Date: 10/15/2013 4:43:17 PM

19www.fi pa.com

Sheet metal handling | Vacuum cupsFlat and bellows vacuum cups – Series SM-P / SM-T

Dimensions

G1

D

h1

H

SW1

G1

H

D

SW1

SW2 h1

Flat vacuum cups slip-resistant with female thread – Series SM-PIØ 10 mm

Flat vacuum cups slip-resistant with female thread – Series SM-PIØ 20 | 30 | 40 | 50 mm

G1

D

h1

H

SW1 G1

HD

SW1

SW2

h1

Flat vacuum cups slip-resistant with male thread – Series SM-PIØ 10 mm

Flat vacuum cups slip-resistant with male thread – Series SM-PIØ 20 | 30 | 40 | 50 mm

G1

dn

d1

d4

D

H

h1

h3

a

Bellows vacuum cups with a special fitting for vacuum carpets – Series SM-TØ 18 mm

a = Special fitting with installed orifice ø 0.4 mm. Material: PA6/ O-ring NBR

Continued on the next page

Page 22: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 020

Sheet metal handling | Vacuum cupsFlat and bellows vacuum cups – Series SM-P / SM-T

Item no.

Ø D [mm] Ø d1 [mm] Ø d4 [mm] Ø dn [mm] G1 H [mm] h1 [mm] h3 [mm] SW1 SW2

Flat vacuum cups slip-resistant with female thread – Series SM-PI

100.010.100.1 10 -- -- -- G1/8 27 9,5 -- 13 --

100.020.101.1 20 -- -- -- G1/8 24 9,5 -- 13 3

100.030.102.1 30 -- -- -- G1/8 26 9,5 -- 13 3

100.040.103.1 40 -- -- -- G1/8 30 9,5 -- 13 3

100.050.104.1 50 -- -- -- G1/4 35 11 -- 17 3

Flat vacuum cups slip-resistant with male thread – Series SM-PI

100.010.110.1 10 -- -- -- G1/8 16 7 -- 13 --

100.020.111.1 20 -- -- -- G1/8 23 8 -- 13 3

100.030.112.1 30 -- -- -- G1/8 25 8 -- 13 3

100.040.113.1 40 -- -- -- G1/8 29 8 -- 13 3

100.050.114.1 50 -- -- -- G1/4 32 10 -- 17 3

Bellows vacuum cups with a special fitting for sucker plate units – Series SM-T

20.018.125.1 18 16 8 0,4 M8 34 6 9,5 -- --

Page 23: VentuzeCreated Date: 10/15/2013 4:43:17 PM

21www.fi pa.com

Sheet metal handling | Vacuum cupsLow-leak suction plates - Series SPLT

Low-leak suction plates - Series SPLT

Sucker plate 67.010

Product Description Advantage

Combination of 4x4 or 6x6 bellows suction cups with 2.5 bellows in oil resistant NBR.Suction plate suspended using a spring leveler with internal vacuum channel (25 mm stroke). Off-center vacuum connection possible.

> Reliable suction with variable product geometries

Application:

Low-leak suction plates are used wherever product variations or perforation could cause a lack of contact with the product surface during suction (e.g. laser cutters).Ordinary vacuum cups would draw in large quantities of excess air when not in contact with the product. This would cause the entire vacuum circuit to collapse, and other suction cups in the circuit would drop the product.The flow limits used in the SPLT series reduce leakage to a degree that allows the central vacuum unit to maintain an acceptable vacuum level in the circuit.

Technical data Accessories

Item no.

Model Number of Vacuum cups

Lift Spring leveler [mm]

Cup lift [mm]

Gripping force *[N]

Max. Leak **(Vacuum cups unassigned )[Nl/min]

Connection to the machine

Vacuum connection

Spare cup

Suction plates (unit)

67.010 SPLT-4x4-25 16 25 9,5 190 24 M20x1,5-male G1/8-female 20.018.125.1 (P. 18)

67.011 SPLT-6x6-25 36 25 9,5 426 54 M30x1,5-male G3/8-female 20.018.125.1 (P. 18)

* theoretical value at 60% vacuum and a dry, smooth product surface. Figure excludes safety factor** at 60 % vacuum

Dimensions

6

75

M20x1,5

4025

5

131

13

115

M30x1,5

5225

10,5

150

67.010 67.011

NEW

Page 24: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 022

Sheet metal handling | Vacuum cupsBellows vacuum cups with 1,5 folds for dynamic sheet handling - Series SM-B

Bellows vacuum cups with 1,5 folds for dynamic sheet handling - Series SM-B

Product Description Advantage

Robust, circular NBR bellows suction cups with vulcanized fitting and large area, multi-part “anti-slip” cleats.Various connection threads available. Silicone-free.

> Internal supports help to prevent deep-drawing or deformation of thin sheets > Leak-free suction even with curved surfaces due to flexible sealing lip > Fold geometry allows handling of three dimensional shaped sheets > Secure fit due to vulcanized connection thread

Technical dataModel / Lipdimensions

Thread

G1/4-male G1/4-female G3/8-female M10-male M14x1,5-male Rectangular adapter

SM-B-30 22.030.171.1 22.030.172.1 22.030.173.1 22.030.174.1 22.030.175.1 22.030.176.1 9

SM-B-40 22.040.177.1 22.040.178.1 22.040.179.1 22.040.180.1 22.040.181.1 22.040.182.1 10

SM-B-50 22.050.183.1 22.050.184.1 22.050.185.1 22.050.186.1 22.050.187.1 22.050.188.1 11,5

SM-B-60 22.060.189.1 22.060.190.1 22.060.191.1 22.060.192.1 22.060.193.1 22.060.194.1 14,5

SM-B-80 22.080.195.1 22.080.196.1 22.080.197.1 22.080.198.1 22.080.199.1 22.080.200.1 22

SM-B-100 22.100.201.1 22.100.202.1 22.100.203.1 22.100.204.1 22.100.205.1 22.100.206.1 26

SM-B-125 22.125.207.1 22.125.208.1 22.125.209.1 22.125.210.1 22.125.211.1 22.125.212.1 32

Dimensions

h1

H

SW

D

dnG2

hg

h1

HSW

D

dnG1

hg

Drawing A Drawing B

h1

H

SW

D

dn

L

Drawing C "Anti-slip" Cleats (SM-B-80)

NEW

Page 25: VentuzeCreated Date: 10/15/2013 4:43:17 PM

23www.fi pa.com

Sheet metal handling | Vacuum cupsBellows suction cups with 1,5 folds for dynamic sheet handling - Series SM-B

Item no.

Drawing Ø D [mm]

Ø dn [mm]

G1 (female)

G2 (male)

#L [mm]

H [mm]

h1 [mm]

hg [mm]

SW

22.030.171.1 A 32 4 -- G1/4 -- 28 9 10 17

22.030.172.1 B 32 4 G1/4 -- -- 28 9 12 17

22.030.173.1 B 32 4 G3/8 -- -- 44 9 10 17

22.030.174.1 A 32 4 -- M10 -- 28 9 12 17

22.030.175.1 A 32 4 -- M14x1,5 -- 28 9 12 17

22.030.176.1 C 32 4 -- -- 32 30,2 9 -- 17

22.040.177.1 A 42 4 -- G1/4 -- 29 10 10 17

22.040.178.1 B 42 4 G1/4 -- -- 29 10 12 17

22.040.179.1 B 42 4 G3/8 -- -- 45 10 10 17

22.040.180.1 A 42 4 -- M10 -- 29 10 12 17

22.040.181.1 A 42 4 -- M14x1,5 -- 29 10 12 17

22.040.182.1 C 42 4 -- -- 32 31,2 10 -- 17

22.050.183.1 A 52 6 -- G1/4 -- 37 11,5 10 22

22.050.184.1 B 52 6 G1/4 -- -- 42 11,5 20 22

22.050.185.1 B 52 6 G3/8 -- -- 37 11,5 15 22

22.050.186.1 A 52 4 -- M10 -- 37 11,5 12 22

22.050.187.1 A 52 6 -- M14x1,5 -- 37 11,5 12 22

22.050.188.1 C 52 6 -- -- 32 36,5 11,5 -- 22

22.060.189.1 A 63 6 -- G1/4 -- 41,5 14,5 10 22

22.060.190.1 B 63 8 G1/4 -- -- 46,5 14,5 20 22

22.060.191.1 B 63 8 G3/8 -- -- 41,5 14,5 15 22

22.060.192.1 A 63 4 -- M10 -- 41,5 14,5 12 22

22.060.193.1 A 63 6 -- M14x1,5 -- 41,5 14,5 12 22

22.060.194.1 C 63 8 -- -- 32 41 14,5 -- 22

22.080.195.1 A 83 6 -- G1/4 -- 50 22 10 22

22.080.196.1 B 83 8 G1/4 -- -- 55 22 20 22

22.080.197.1 B 83 8 G3/8 -- -- 50 22 15 22

22.080.198.1 A 83 4 -- M10 -- 50 22 12 22

22.080.199.1 A 83 6 -- M14x1,5 -- 50 22 12 22

22.080.200.1 C 83 8 -- -- 32 49,5 22 -- 22

22.100.201.1 A 103 6 -- G1/4 -- 57 26 10 22

22.100.202.1 B 103 8 G1/4 -- -- 62 26 20 22

22.100.203.1 B 103 8 G3/8 -- -- 57 26 15 22

22.100.204.1 A 103 4 -- M10 -- 57 26 12 22

22.100.205.1 A 103 6 -- M14x1,5 -- 57 26 12 22

22.100.206.1 C 103 8 -- -- 32 56,5 26 -- 22

22.125.207.1 A 128 6 -- G1/4 -- 68 32 10 22

22.125.208.1 B 128 8 G1/4 -- -- 73 32 20 22

22.125.209.1 B 128 8 G3/8 -- -- 68 32 15 22

22.125.210.1 A 128 4 -- M10 -- 68 32 12 22

22.125.211.1 A 128 6 -- M14x1,5 -- 68 32 12 22

22.125.212.1 C 128 8 -- -- 32 67,5 32 -- 22

Page 26: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 024

Sheet metal handling | Vacuum cupsBellows vacuum cups 1,5 bellows made of Varioflex® - Series SP-BX1

Bellows vacuum cups 1,5 bellows made of Varioflex® - Series SP-BX1

Product Description Advantage

Bellows suction cups with 1,5 bellows made of an extremely wear-resistant polymer.Soft, flexible sealing lip in 30° Shore (red). Stable body in 60° Shore (black).Cleats stabilize the product.

> Long life cycle reduces machine downtimes > Perfect sealing performance on rough or uneven surface > High stability and fast reset > Oil and ozone-resistant > Extremely low-marking > Bellows compensate for height differences > Cleats allow for fast acceleration

Note

Explanation of the type description:> SP-BX1,5 = series name of the bellows suction cup with 1,5 folds> -xx = nominal diameter> Example: SP-BX1,5-15 = bellows suction cup with 1,5 bellows and a nominal diameter of 15 mm

Technical data Accessories

Model / Lip dimensions

Diameternominal[mm]

Connectionthread 1

Item no. Connectionthread 2

Item no. Connection thread 3

Item no. Number of bellows

Usage temperature [°C]

Spare cup

Bellows vacuum cups 1,5 bellows - Series SP-BX1 fully assembled with fitting

SP-BX1,5-15 15 M5-male 22.015.238.16 M6-male 22.015.239.16 4,5 1,5 10 - 50 23.015.256.16

SP-BX1,5-20 20 M5-female 22.020.240.16 G1/8-male 22.020.241.16 7 1,5 10 - 50 23.020.257.16

SP-BX1,5-30 30NPSF1/8-female

22.030.242.16 G1/4-male 22.030.243.16 G3/8-male 22.030.244.16 8 1,5 10 - 50 23.030.258.16

SP-BX1,5-40 40NPSF1/8-female

22.040.245.16 G1/4-male 22.040.246.16 G3/8-male 22.040.247.16 10 1,5 10 - 50 23.040.259.16

SP-BX1,5-50 50NPSF1/8-female

22.050.248.16 G1/4-male 22.050.249.16 G3/8-male 22.050.250.16 13 1,5 10 - 50 23.050.260.16

SP-BX1,5-70 70 G3/8-male 22.070.236.16NPSF3/8-female

22.070.237.16 17 1,5 10 - 50 --

Dimensions

d4D

Hh1

G2

SW

d3

h2

a

d4D

H

G1

h1

SW

d3

h2

a

Drawing A Drawing B

a = Sieve

NEW

COMPOSITE MATERIAL 60°/30°

Page 27: VentuzeCreated Date: 10/15/2013 4:43:17 PM

25www.fi pa.com

Sheet metal handling | Vacuum cupsBellows vacuum cups 1,5 bellows made of Varioflex® - Series SP-BX1

Dimensions

d4

d3

D

Hh1

G2

h2

SW

d4D

d3

H

h1

G1

h2

SW

Drawing C Drawing D

d4D

H

d2

d1

d4

D

H

d2d1

h2

Drawing E Drawing F

a = Sieve

Item no

Drawing Sieve Ø D [mm]

Ø d1 [mm]

Ø d2 [mm]

Ø d3 [mm]

Ø d4 [mm]

G1 (female)

G2 (male)

H [mm]

h1 [mm]

h2 [mm]

SW

Bellows vacuum cups 1,5 bellows - Series SP-BX1 fully assembled with fitting

22.015.238.16 A -- 16 -- -- -- 7 -- M5 24,4 3,6 -- 8

22.015.239.16 A -- 16 -- -- -- 7 -- M6 23,5 6 -- 13

22.020.240.16 B yes 21 -- -- 22 10 M5 -- 24 8 -- 13

22.020.241.16 A yes 21 -- -- 22 10 -- G1/8 23 7,5 -- 13

22.030.242.16 B yes 32 -- -- 32,5 16 NPSF1/8 -- 24,8 6 7,5 19

22.030.243.16 A yes 32 -- -- 32,5 16 -- G1/4 22,8 9 7,5 19

22.030.244.16 A yes 32 -- -- 32,5 16 -- G3/8 22,8 10 7,5 22

22.040.245.16 B yes 42 -- -- 42,4 26,5 NPSF1/8 -- 30,4 6 10 19

22.040.246.16 A yes 42 -- -- 42,4 26,5 -- G1/4 28,4 9 10 19

22.040.247.16 A yes 42 -- -- 42,4 26,5 -- G3/8 28,4 10 10 22

22.050.248.16 B yes 52,5 -- -- 52,5 30 NPSF1/8 -- 38 9 14,3 22

22.050.249.16 A yes 52,5 -- -- 52,5 30 -- G1/4 35 9 14,3 22

22.050.250.16 A yes 52,5 -- -- 52,5 30 -- G3/8 35 10 14,3 22

22.070.236.16 C -- 73 -- -- 74 44 -- G3/8 36,5 10 18 8

22.070.237.16 D -- 73 -- -- 74 44 NPSF3/8 -- 48 11,5 18 8

Spare cups

23.015.256.16 E -- 16 9 3,8 -- 7 -- -- 19 -- -- --

23.020.257.16 E -- 21 12 5 -- 10 -- -- 18 -- -- --

23.030.258.16 F -- 32 16,8 6,5 -- 16 -- -- 16,8 -- 7,5 --

23.040.259.16 F -- 42 22,4 6,5 -- 26,6 -- -- 22,4 -- 10 --

23.050.260.16 F -- 52,5 28 10,5 -- 30 -- -- 29 -- 14,3 --

Page 28: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 026

Sheet metal handling | Vacuum cupsBellows vacuum cups 2,5 bellows made of Varioflex® - Series SP-BX2

Bellows vacuum cups 2,5 bellows made of Varioflex® - Series SP-BX2

Product Description Advantage

Bellows suction cups with 2,5 bellows made of an extremely wear-resistant polymer.Soft, flexible sealing lip in 30° Shore (red). Stable body in 60° Shore (black).

> Long life cycle reduces machine downtimes > Perfect sealing performance on rough or uneven surface > High stability and fast reset > Oil and ozone-resistant > Extremely low-marking > Filter disk from Ø 30 mm installed between the bellows optional > Excellent height and angle compensation

Note

Explanation of the type description: > SP-BX2,5 = series name of the bellows suction cup with 2,5 bellows > -xx = nominal diameter > Example: SP-BX2,5-20 = bellows suction cup with 2,5 bellows and a nominal diameter of 20 mm

Technical data Accessories

Model / Lip dimensions

Diameternominal[mm]

Connectionthread 1

Item no. Connectionthread 2

Item no. Connection thread 3

Item no. Number of bellows

Usage temperature [°C]

Spare cups

Bellows vacuum cups 2,5 bellows - Series SP-BX2 fully assembled with fitting

SP-BX2,5-20 20 M5-female 20.020.133.16 G1/8-male 20.020.134.16 7,5 2,5 10 - 50 21.020.167.16

SP-BX2,5-30 30 M5-female 20.030.135.16 G1/8-male 20.030.136.16 10,5 2,5 10 - 50 21.030.168.16

SP-BX2,5-40 40NSPF1/8-female

20.040.137.16 G1/4-male 20.040.138.16 G3/8-male 20.040.139.16 14 2,5 10 - 50 21.040.169.16

SP-BX2,5-50 50NSPF1/8-female

20.050.140.16 G1/4-male 20.050.141.16 G3/8-male 20.050.142.16 16 2,5 10 - 50 21.050.170.16

SP-BX2,5-70 70 G3/8-male 20.070.131.16NPSF3/8-female

20.070.132.16 24 2,5 10 - 50 --

Bellows vacuum cups 2,5 bellows - Series SP-BX2 fully assembled with fitting and filter

SP-BX2,5-30 30 M5-female 20.030.135.16-FI G1/8-male 20.030.136.16-FI 9 2,5 10 - 50 21.030.168.16-FI

SP-BX2,5-40 40NPSF1/8-female

20.040.137.16-FI G1/4-male 20.040.138.16-FI G3/8-male 20.040.139.16-FI 12 2,5 10 - 50 21.040.169.16-FI

SP-BX2,5-50 50NPSF1/8-female

20.050.140.16-FI G1/4-male 20.050.141.16-FI G3/8-male 20.050.142.16-FI 14 2,5 10 - 50 21.050.170.16-FI

SP-BX2,5-70 70 G3/8-male 20.070.131.16-FINPSF3/8-female

20.070.132.16-FI 21,5 2,5 10 - 50 --

NEW

COMPOSITE MATERIAL 60°/30°

Page 29: VentuzeCreated Date: 10/15/2013 4:43:17 PM

27www.fi pa.com

Sheet metal handling | Vacuum cupsBellows vacuum cups 2,5 bellows made of Varioflex® - Series SP-BX2

Dimensions

d3d4

D

H

h1

G1

SW

a

d4d3D

Hh1

G2

SW

a

Drawing A Drawing B

d4d3

D

Hh1

G2

SW

d4d3D

G1

h1

H

SW

Drawing C Drawing D

d4d3D

H

d2d1

Drawing E

a = Sieve

Item no.

Drawing Sieve Filter Ø D [mm] Ø d1 [mm]

Ø d2 [mm]

Ø d3 [mm]

Ø d4 [mm]

G1 (female)

G2 (male)

H [mm]

h1 [mm]

SW

Bellows vacuum cups 2,5 bellows - Series SP-BX2 fully assembled with fitting

20.020.133.16 A yes -- 21 -- -- 20 11,5 M5 -- 20,5 8 13

20.020.134.16 B yes -- 21 -- -- 20 11,5 -- G1/8 19,5 7,5 13

20.030.135.16 A yes -- 30 -- -- 25,5 14,4 M5 -- 27,3 8 13

Continued on the next page

Page 30: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 028

Sheet metal handling | Vacuum cupsBellows vacuum cups 2,5 bellows made of Varioflex® - Series SP-BX2

Item no.

Drawing Sieve Filter Ø D [mm] Ø d1 [mm]

Ø d2 [mm]

Ø d3 [mm]

Ø d4 [mm]

G1 (female)

G2 (male)

H [mm]

h1 [mm]

SW

20.030.136.16 B yes -- 30 -- -- 25,5 14,4 -- G1/8 26,3 7,5 13

20.040.137.16 A yes -- 40 -- -- 34 17 NPSF1/8 -- 36,4 6 19

20.040.138.16 B yes -- 40 -- -- 34 17 -- G1/4 34,4 9 19

20.040.139.16 B yes -- 40 -- -- 34 17 -- G3/8 34,4 10 22

20.050.140.16 A yes -- 50 -- -- 42,5 21 NPSF1/8 -- 44,5 9 22

20.050.141.16 B yes -- 50 -- -- 42,5 21 -- G1/4 41,5 9 22

20.050.142.16 B yes -- 50 -- -- 42,5 21 -- G3/8 41,5 10 8

20.070.131.16 C -- -- 70 -- -- 59,5 32 -- G3/8 48,5 10 8

20.070.132.16 D -- -- 70 -- -- 59,5 32 NPSF3/8 -- 60 12 8

Bellows vacuum cups 2,5 bellows - Series SP-BX2 fully assembled with fitting and filter

20.030.135.16-FI A yes yes 30 -- -- 25,5 14,4 M5 -- 27,3 8 13

20.030.136.16-FI B yes yes 30 -- -- 25,5 14,4 -- G1/8 26,3 7,5 13

20.040.137.16-FI A yes yes 40 -- -- 34 17 NPSF1/8 -- 36,4 6 19

20.040.138.16-FI B yes yes 40 -- -- 34 17 -- G1/4 34,4 9 19

20.040.139.16-FI B yes yes 40 -- -- 34 17 -- G3/8 34,4 10 22

20.050.140.16-FI A yes yes 50 -- -- 42,5 21 NPSF1/8 -- 44,5 9 22

20.050.141.16-FI B yes yes 50 -- -- 42,5 21 -- G1/4 41,5 9 22

20.050.142.16-FI B yes yes 50 -- -- 42,5 21 -- G3/8 41,5 10 8

20.070.131.16-FI C -- yes 70 -- -- 59,5 32 -- G3/8 48,5 10 8

20.070.132.16-FI D -- yes 70 -- -- 59,5 32 NPSF3/8 -- 60 12 8

Spare cups

21.020.167.16 E -- -- 21 12 5 20 11,5 -- -- 14,5 -- --

21.030.168.16 E -- -- 30 16,5 5 25,5 14,4 -- -- 21,3 -- --

21.040.169.16 E -- -- 40 22 6,5 34 17 -- -- 28,4 -- --

21.050.170.16 E -- -- 50 27,5 10,5 42,5 21 -- -- 35,5 -- --

Spare cups with filter

21.030.168.16-FI E -- yes 30 16,5 5 25,5 14,4 -- -- 21,3 -- --

21.040.169.16-FI E -- yes 40 22 6,5 34 17 -- -- 28,4 -- --

21.050.170.16-FI E -- yes 50 27,5 10,5 42,5 21 -- -- 35,5 -- --

Page 31: VentuzeCreated Date: 10/15/2013 4:43:17 PM

29www.fi pa.com

Sheet metal handling | Vacuum cupsBellows vacuum suction plates – Series SBPL-E

Bellows vacuum suction plates – Series SBPL-E

Product Description Advantage

Vacuum suction plate, 1.5 bellows, vulcanized carrier plate made of steel. Soft sealing lip from a low-marking NBR blend and lightly compressing bellows for gentle handling of heavy but sensitive products (e.g. sheet metal). Divided support surfaces provide a firm grip for all loads.

> Gentle handling of heavy, sensitive products > Good adaptation to both concave and convex surfaces > Rubberised support surfaces prevent deformation of workpieces > Good absorbability when touching the product > Low marking

Ordering notes

Customised drilling patterns available on request

Technical Data

Item no.

Model / Lip dimensions

Connection thread

Weight [g] Number of bellows Material / color

22.150.084.1 SBPL-E-150 G1/2-female 32 460 1,5 NBR (gr)

22.200.087.1 SBPL-E-200 G1/2-female 30 860 1,5 NBR (gr)

22.250.088.1 SBPL-E-250 G1/2-female 38 1900 1,5 NBR (gr)

22.300.091.1 SBPL-E-306 - 60 4200 1,5 NBR (gr)

22.350.102.1 SBPL-E-350 - 55 4200 1,5 NBR (gr)

Dimensions

G1

d4

D

d5

h3

H

a

d4

D

d5

h3

H

a

Ø 150 | 200 | 250 mm Ø 306 | 350 mm

a = Beam: steel

Item no.

Ø D [mm] Ø d4 [mm] Ø d5 [mm] G1 H [mm] h3 [mm]

22.150.084.1 150 94 157 G1/2 54 15,5

22.200.087.1 200 140 206 G1/2 57 17

22.250.088.1 250 190 255 G1/2 61 17,5

22.300.091.1 306 220 310 -- 83 20

22.350.102.1 350 262 350 -- 84 21

Page 32: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 030

Sheet metal handling | JointsG threaded ball joints - Series SZ-GKG

G threaded ball joints - Series SZ-GKG

Product Description Advantage

> Universal articulating mount for vacuum cups > Version: Ball and socket with O-ring seal

> Compensation for sloping surfaces of the product > Angle compensation for sagging products such as sheet goods

Technical Data

Item no.

Thread suction side G2 Thread at the machine G1 Pivoting range S [°] Lifting force [N] Weight [g]

270.072 G1/8-male G1/8-female 2x15 300 26

270.073/1 G1/4-male G1/4-female 2x15 1500 49

270.075 G1/2-male G1/2-female 2x15 2500 116

Dimensions

G 1

G2

h2H

SW 1

h1

S

Item no.

Ø dn [mm] G1 G2 H [mm] h1 [mm] h2 [mm] SW1 S [°]

270.072 2 G1/8 G1/8 25 8,5 7 14 2x15

270.073/1 3,5 G1/4 G1/4 37 11 10 19 2x15

270.075 4 G1/2 G1/2 38,5 14 11,5 24 2x15

Page 33: VentuzeCreated Date: 10/15/2013 4:43:17 PM

31www.fi pa.com

Sheet metal handling | JointsRubber joints - Series SZ-GG

Rubber joints - Series SZ-GG

Product Description Advantage

> Universal articulating mount for vacuum cups > Version: Rubber-metal connection with vacuum channel

> Compensation for sloping surfaces of the product > Angle compensation for sagging products such as sheet goods > Automatic reset of the vacuum cup to normal position

Technical Data

Item no.

Thread suction side G2 Thread at the machine G1 Pivoting range S [°] Lifting force [N] Weight [g]

270.199 G1/4-female G1/4-female 2x25 450 49

270.201 G1/4-female G1/4-female 2x10 850 75

270.202 G3/8-female G3/8-female 2x10 850 63

270.203 G1/2-male G1/2-female 2x12 3000 100

Dimensions

H

G1

G2

h2

h1

dn

D

SW1

SS

a

b

a = Brass/steel b = Rubber

Item no.

Ø D [mm] Ø dn [mm] G1 G2 H [mm] h1 [mm] h2 [mm] SW1 S [°]

270.199 30 5 G1/4 G1/4 46 8 8 17 2x25

270.201 30,5 9 G1/4 G1/4 32 9 9 25 2x10

270.202 30,5 11 G3/8 G3/8 32 9 9 25 2x10

270.203 -- 6 G1/2 G1/2 33,5 14 14 27 2x12

Page 34: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 032

Sheet metal handling | Spring levelersHeavy-duty spring levelers with threaded fitting - Series SZ-NIV-HD

Heavy-duty spring levelers with threaded fitting - Series SZ-NIV-HD

Product Description Advantage

Leveling with stainless steel shaft and high-quality bearings for dynamic handling and short cycle times. Optionally also available non-rotating.Vacuum connection on top. Vacuum channel via spring levelers.

> Long life even under the toughest conditions > Compensate for height differences > Soft attachment for sensitive products

Technical Data

Item no.

Model Thread suction side G2 Lift C [mm] Weight [g] Non-rotating

50.315 SZ-NIV-HD-G1/8-AG-15 G1/8-male 15 0,221 --

50.310 SZ-NIV-HD-G1/8-AG-15-VS G1/8-male 15 0,221 ja

50.316 SZ-NIV-HD-G1/8-AG-25 G1/8-male 25 0,143 --

50.311 SZ-NIV-HD-G1/8-AG-25-VS G1/8-male 25 0,143 ja

50.317 SZ-NIV-HD-G1/8-AG-50 G1/8-male 50 0,097 --

50.312 SZ-NIV-HD-G1/8-AG-50-VS G1/8-male 50 0,097 ja

50.345 SZ-NIV-HD-G1/4-AG-25 G1/4-male 25 0,711 --

50.340 SZ-NIV-HD-G1/4-AG-25-VS G1/4-male 25 0,711 ja

50.346 SZ-NIV-HD-G1/4-AG-50 G1/4-male 50 0,452 --

50.341 SZ-NIV-HD-G1/4-AG-50-VS G1/4-male 50 0,452 ja

50.347 SZ-NIV-HD-G1/4-AG-75 G1/4-male 75 0,262 --

50.342 SZ-NIV-HD-G1/4-AG-75-VS G1/4-male 75 0,262 ja

50.350 SZ-NIV-HD-G3/8-AG-25 G3/8-male 25 3,828 --

50.353 SZ-NIV-HD-G3/8-AG-25-VS G3/8-male 25 3,828 ja

50.351 SZ-NIV-HD-G3/8-AG-75 G3/8-male 75 1,072 --

50.354 SZ-NIV-HD-G3/8-AG-75-VS G3/8-male 75 1,072 ja

50.360 SZ-NIV-HD-G1/2-AG-25 G1/2-male 25 3,828 --

50.363 SZ-NIV-HD-G1/2-AG-25-VS G1/2-male 25 3,828 ja

50.361 SZ-NIV-HD-G1/2-AG-75 G1/2-male 75 1,072 --

50.364 SZ-NIV-HD-G1/2-AG-75-VS G1/2-male 75 1,072 ja

50.366 SZ-NIV-HD-M12-AG-25 M12-male 25 0,711 --

50.367 SZ-NIV-HD-M12-AG-25-VS M12-male 25 0,711 ja

50.368 SZ-NIV-HD-M12-AG-50 M12-male 50 0,452 --

50.369 SZ-NIV-HD-M12-AG-50-VS M12-male 50 0,452 ja

50.370 SZ-NIV-HD-M12-AG-75 M12-male 75 0,262 --

50.371 SZ-NIV-HD-M12-AG-75-VS M12-male 75 0,262 ja

50.372 SZ-NIV-HD-M16-AG-25 M16-male 25 3,828 --

50.373 SZ-NIV-HD-M16-AG-25-VS M16-male 25 3,828 ja

50.374 SZ-NIV-HD-M16-AG-75 M16-male 75 1,072 --

50.375 SZ-NIV-HD-M16-AG-75-VS M16-male 75 1,072 ja

HEAVY-DUTY DESIGN

Page 35: VentuzeCreated Date: 10/15/2013 4:43:17 PM

33www.fi pa.com

Sheet metal handling | Spring levelersHeavy-duty spring levelers with threaded fitting - Series SZ-NIV-HD

Dimensions

h 3

h

h 2

G 2

G 3

SW 1

H

C

G 1

h 1

Item no. C [mm] H [mm] h1 [mm] h2 [mm] h3 [mm] SW1 G1 (female) G2 (male) G3 (male)

50.315 72 8 8 30 22 G1/8 G1/8 M16x1 15

50.310 72 8 8 30 22 G1/8 G1/8 M16x1 15

50.316 85 8 8 30 22 G1/8 G1/8 M16x1 25

50.311 85 8 8 30 22 G1/8 G1/8 M16x1 25

50.317 116 8 8 30 22 G1/8 G1/8 M16x1 50

50.312 116 8 8 30 22 G1/8 G1/8 M16x1 50

50.345 85,5 12 8,5 40 24 G1/8 G1/4 M20x1,5 25

50.340 85,5 12 8,5 40 24 G1/8 G1/4 M20x1,5 25

50.346 115 12 8,5 40 24 G1/8 G1/4 M20x1,5 50

50.341 115 12 8,5 40 24 G1/8 G1/4 M20x1,5 50

50.347 144,5 12 8,5 40 24 G1/8 G1/4 M20x1,5 75

50.342 144,5 12 8,5 40 24 G1/8 G1/4 M20x1,5 75

50.350 104 14 12 53 36 G3/8 G3/8 M30x1,5 25

50.353 104 14 12 53 36 G3/8 G3/8 M30x1,5 25

50.351 175 14 12 53 36 G3/8 G3/8 M30x1,5 75

50.354 175 14 12 53 36 G3/8 G3/8 M30x1,5 75

50.360 104 14 12 53 36 G3/8 G1/2 M30x1,5 25

50.363 104 14 12 53 36 G3/8 G1/2 M30x1,5 25

50.361 175 14 12 53 36 G3/8 G1/2 M30x1,5 75

50.364 175 14 12 53 36 G3/8 G1/2 M30x1,5 75

50.366 97,5 12 10 40 24 G1/8 M12 M20x1,5 25

50.367 97,5 12 10 40 24 G1/8 M12 M20x1,5 25

50.368 127 12 10 40 24 G1/8 M12 M20x1,5 50

50.369 127 12 10 40 24 G1/8 M12 M20x1,5 50

50.370 156,5 12 10 40 24 G1/8 M12 M20x1,5 75

50.371 156,5 12 10 40 24 G1/8 M12 M20x1,5 75

50.372 119 14 10 53 36 G3/8 M16 M30x1,5 25

50.373 119 14 10 53 36 G3/8 M16 M30x1,5 25

50.374 190 14 10 53 36 G3/8 M16 M30x1,5 75

50.375 190 14 10 53 36 G3/8 M16 M30x1,5 75

Recommendation

For the best possible service life do not exceed max. lift indicated.

Page 36: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 034

Sheet metal handling | Magnetic grippersMagnetic grippers - pneumatically controlled

Magnetic grippers - pneumatically controlledSafe handling by permanent magnets

Fast exchangeable NBR sealing rings (70° Shore Hardness)

Product Description

> Safe handling of sheet metal or ferromagnetic workpieces with or without bore holes or cutouts > Very high holding force thanks to powerful permanent magnets > Robust and compact aluminium body, anodized, red > Very wear-resistant and fast exchangeable NBR sealing rings (70° Shore Hardness) to avoid scratches due to contact between gripper and workpiece > Optional magnetic PNP and NPN sensors from model PMG 40 for part control by monitoring the piston position

Ordering notes

Sealing ring included in delivery

Technical Data

Item no. Prin

cip

le o

f op

erat

ion

Pres

sure

ran

ge

[bar

]

Max

. Gri

pp

ing

forc

e [N

]

Rec

omm

end

ed

wor

kloa

d [N

]

Air

co

nsu

mpt

ion

[l/st

roke

]

Min

. re

com

men

ded

sh

eet

thic

knes

s [m

m]

Prot

ecti

on c

lass

Am

bie

nt a

ir

tem

per

atu

re

[°C]

Wei

ght

[g]

Suit

able

ac

cess

orie

s

PMG24 Double 4 - 6 40 13 0,013 0,5 IP67 0 - 70 100 Sealing ring PMG24-NBR

PMG40 Double 4 - 6 170 57 0,04 0,5 IP67 0 - 70 200Sensor GR04.199 Sensor GR04.199/NPN Sealing ring PMG40-NBR

PMG70 Double 4 - 6 400 135 0,142 0,5 IP67 0 - 70 800Sensor GR04.199 Sensor GR04.199/NPN Sealing ring PMG70-NBR

Optional: with magnetic sensor

Magnetic gripper PMG 70 with PNP sensor GR04.199

NEW

Page 37: VentuzeCreated Date: 10/15/2013 4:43:17 PM

35www.fi pa.com

Sheet metal handling | Magnetic grippersMagnetic grippers - pneumatically controlled

Dimensions

24

M5x0.8(2x)9

16

42

524

16

PORT M5x0.8 (2x)PORT

M5x0.8 (2x)

35

62,8

Ø20

Ø24Ø25,2

18

37

M5x8(2x)

5

PORT M5 (2x)

M5x12

M5x8(2x)

4028

2840

28 6

35 (

2x)

62,9

SENSORSLOT

8 (2x)

PMG24 PMG40

M6x12 (4x)

M10x13

58 (2x)

70

58 (

2x)

70

SEN

SOR

SLO

T

739

PORTG 1/8“

PORTG 1/8“

70,5

70

44 (2x) M6x12 (4x)

7,5

35 (2

x)28

(2x)

PMG70

Page 38: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 036

Sheet metal handling | Notes

Notes:

Page 39: VentuzeCreated Date: 10/15/2013 4:43:17 PM

37www.fi pa.com

Sheet metal handling | Magnetic grippersMagnetic grippers - electrical controlled

Magnetic grippers - electrical controlledSecure handling by permanent magnets

Product Description

> Safe handling of sheet metal or ferromagnetic workpieces with or without bore holes or cut-outs > Advantages to pneumatic controlled magnetic grippers:- Nearly twice the holding force- Neglectable remanent magnetism enables high duty cycles also with thin and/or alloyed sheet metal

> No piping required > Highly energy efficient as electrity is only shortly required for product release > Robust design, combination of permanent and electro-magnet > Easy integration in EOAT gripper systems via metric threads or spring plungers

Technical Data

Item no.

Principle of operation

Rated power [W]

Gripping force [N]

Residual gripping force [N]

Operating voltage of the switch-off coil [V]

Power-on time [ED]

Protection class

Max. operating temperature [°C]

Weight [g] Suitable fittings

MG35 electrical 4,6 160 <1 24 25% ED at < 2 min. IP65 80 200 270.448

MG55 electrical 9,0 420 <1 24 25% ED at < 2 min. IP65 80 500 270.449

MG70 electrical 13,3 720 <1 24 25% ED at < 2 min. IP65 80 900 270.450

Dimensions

ø A

B

G1

C

**

** = Holding surface

Item no. Ø A [mm] B [mm] C [mm] G1

MG35 35 30 5 M4

MG55 55 36 6 M5

MG70 70 45 8 M8

Page 40: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 038

Sheet metal handling | Vacuum grippersVacuum grippers

Vacuum grippers

View of the suction chamber

Product Description

> Handling of dimensionally stable or instable workpieces > On board vacuum generation via high performance ejectors for optimum suction power > Dirt-proof design > Foam pad with optimum adjustment to product surface - easy to replace > Optional side channel blower for handling very porous goods

Note

On request: > Splitting of suction chamber for multi-zone picking and release or product adjustment > Depth of the suction chamber can be adjusted for optimum handling of specific products

Technical Data

Item no.

Max. gripping force [N] at 60 % vacuum (-600 mbar) Suitable seal collars

Dense products (e.g. steel) Semi-porous products (e.g. wood) Porous products (e.g. carton boxes)

TG100x250 280 170 70 PPF100x250

TG150x300 500 300 125 PPF150x300

TG200x350 770 470 190 PPF200x350

TG250x400 1100 670 270 PPF250x400

TG300x500 1670 1000 400 PPF300x500

TG400x600 2670 1600 625 PPF400x600

Seal collars

Easy replacement of seal collars

NEW

Page 41: VentuzeCreated Date: 10/15/2013 4:43:17 PM

39www.fi pa.com

Sheet metal handling | Vacuum grippersVacuum grippers

In this catalogue you will find a selection of

products for the sheet metal handling.

For our complete range of products and more

information see www.fipa.com.

Dimensions

250

A

B

Ø7

70

200

*

94

10

100

24

C

*

* = Customer attachment location

Item no.

A [mm] B [mm] C [mm]

TG100x250 100 250 62

TG150x300 150 300 62

TG200x350 200 350 62

TG250x400 250 400 93

TG300x500 300 500 93

TG400x600 400 600 93

Page 42: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 040

Sheet metal handling | Parallel grippers2-finger parallel grippers

2-finger parallel grippersFor pinpoint-accuracy in gripping, placing or inserting

GR04.122-20 with sensor GR04.202P (cable angle 90°)

Product Description

> High gripping force > High gripping precision due to high repeatability of +/- 0,01 mm > Versatile use with customized gripper jaws > 2 versions:- double-acting for internal and external gripping, opening and closing by compressed air- single-acting, only one pneumatic connection required, normally open, (N.O.). Closing by compressed air, opening by return spring

> Optional parts monitoring by detection of piston position- PNP and NPN sensors

> Round nut (cable: 90°): GR04.202P, GR04.202N > Round nut (cable straight): GR04.280P, GR04.280N > T-nut (cable: straight): GR04.199, GR04.199/NPN

Ordering notes

Extension cable for sensors:20.503: 3-Pol M8, length 2.500 mm, open wire20.570: 3-Pol M8, length 1.500 mm, end with plug 3-Pol M8

Technical Data

Item no.

Principle of operation

Pressure range [bar]

Closing force at 6 bar [N]

Opening force at 6 bar [N]

Piston diameter [mm]

Total lift [mm]

Operating temperature [°C]

Max. Operating frequency [1/min]

Weight [g]

Suitable accessories

GR04.122-10 Double 3 - 7 16 11 10 2x2 -10 - 60 180 120

Sensor GR04.199Sensor GR04.199/NPN Connector cable 20.503 Connector cable 20.570

GR04.122-10S Single 3 - 7 16 11 10 2x2 -10 - 60 180 120

Sensor GR04.199 Sensor GR04.199/NPN Connector cable 20.503 Connector cable 20.570

GR04.122-16 Double 3 - 7 44 33 16 2x3 -10 - 60 180 160

Sensor GR04.199Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503 Connector cable 20.570

GR04.122-16S Single 3 - 7 44 33 16 2x3 -10 - 60 180 160

Sensor GR04.199 Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503Connector cable 20.570

Page 43: VentuzeCreated Date: 10/15/2013 4:43:17 PM

41www.fi pa.com

Sheet metal handling | Parallel grippers2-finger parallel grippers

Technical Data

Item no.

Principle of operation

Pressure range [bar]

Closing force at 6 bar [N]

Opening force at 6 bar [N]

Piston diameter [mm]

Total lift [mm]

Operating temperature [°C]

Max. Operating frequency [1/min]

Weight [g]

Suitable accessories

GR04.122-20 Double 3 - 7 65 40 20 2x5 -10 - 60 180 300

Sensor GR04.199 Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503Connector cable 20.570

GR04.122-20S Single 3 - 7 65 40 20 2x5 -10 - 60 180 300

Sensor GR04.199 Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503 Connector cable 20.570

GR04.122-25 Double 3 - 7 105 66 25 2x7 -10 - 60 180 365

Sensor GR04.199 Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503 Connector cable 20.570

GR04.122-25S Single 3 - 7 105 66 25 2x7 -10 - 60 180 365

Sensor GR04.199 Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503 Connector cable 20.570

GR04.122-32 Double 3 - 7 225 156 32 2x11 -10 - 60 60 860

Sensor GR04.199Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503 Connector cable 20.570

GR04.122-32S Single 3 - 7 225 156 32 2x11 -10 - 60 60 860

Sensor GR04.199 Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503 Connector cable 20.570

GR04.122-40 Double 3 - 7 320 255 40 2x15 -10 - 60 60 950

Sensor GR04.199 Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503 Connector cable 20.570

GR04.122-40S Single 3 - 7 320 255 40 2x15 -10 - 60 60 950

Sensor GR04.199 Sensor GR04.199/NPN Sensor GR04.202PSensor GR04.202NSensor GR04.280PSensor GR04.280NConnector cable 20.503 Connector cable 20.570

Continued on the next page

Page 44: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 042

Sheet metal handling | Parallel grippers2-finger parallel grippers

Dimensions

A

C

N B

M G

H

I

E

D

F

J

K

L

Q

O

5

6

2

3

5

6

5 = Sensor slot for GR04.2025 = Sensor slot for GR04.2025 6 = Sensor slot for GR04.1996 = Sensor slot for GR04.1996 2 = Open pneumatic connection 2 = Open pneumatic connection 2 3 = Close pneumatic connection 3 = Close pneumatic connection 3

Item no.

A [mm] B [mm] C [mm] D [mm] E [mm] F [mm] G [mm] H [mm]

I [mm] J [mm] K [mm] L M [mm]

N [mm]

O Q

GR04.122-10 23 16,4 29 57 12 5 15 2 4 3 5,7 M2,5 18 12 M4 M3

GR04.122-10S 23 16,4 29 57 12,5 5 15 2 4 3 5,7 M2,5 18 12 M8 M3

GR04.122-16 31 23,6 38 67,5 15 8 21 3 5 4 7 M3 22 15 M4 M4

GR04.122-16S 31 23,6 38 67,5 15 8 21 3 5 4 7 M3 22 15 M4 M4

GR04.122-20 42 27,6 50 85 20 10 26,3 5 8 5 9 M4 32 18 M4 M5

GR04.122-20S 42 27,6 50 85 20 10 26,3 5 8 5 9 M4 32 18 M4 M5

GR04.122-25 52 33,6 63 102,7 25 12 33,3 7 10 6 12 M5 40 22 M6 M6

GR04.122-25S 52 33,6 63 102,7 25 12 33,3 7 10 6 12 M5 40 22 M6 M6

GR04.122-32 60 40 97 113 29 15 48 11 12 7 14 M6 46 31,4 M6 M6

GR04.122-32S 60 40 97 113 29 15 48 11 12 7 14 M6 46 31,4 M6 M6

GR04.122-40 72 48 119 139 36 18 60 15 14 9 17 M8 56 32 M8 M8

GR04.122-40S 72 48 119 139 36 18 60 15 14 9 17 M8 56 32 M8 M8

Page 45: VentuzeCreated Date: 10/15/2013 4:43:17 PM

43www.fi pa.com

Sheet metal handling | Parallel grippersParallel gripper for long strokes - piston diameter 10 - 20 mm

In this catalogue you will find a selection of

products for the sheet metal handling.

For our complete range of products and more

information see www.fipa.com.

Parallel gripper for long strokes - piston diameter 10 - 20 mmSecure Handling of large workpieces

Product Description

> Wide Stroke range > High gripping force > Optional grip detection

Technical Data

Item no.GR04.510 GR04.510-1 GR04.510-2 GR04.516 GR04.516-1 GR04.516-2 GR04.520 GR04.520-1 GR04.520-2

Principle of operation

Double Double Double Double Double Double Double Double Double

Medium Filtered and oiled / unoiled air

Filtered and oiled / unoiled air

Filtered and oiled / unoiled air

Filtered and oiled / unoiled air

Filtered and oiled / unoiled air

Filtered and oiled / unoiled air

Filtered and oiled / unoiled air

Filtered and oiled / unoiled air

Filtered and oiled / unoiled air

Pressure range [bar]

1,5 - 6 1,5 - 6 1,5 - 6 1 - 6 1 - 6 1 - 6 1 - 6 1 - 6 1 - 6

Closing force at 6 bar [N]

22 22 22 60 60 60 100 100 100

Operating temperature [°C]

-5 - 70 -5 - 70 -5 - 70 -5 - 70 -5 - 70 -5 - 70 -5 - 70 -5 - 70 -5 - 70

Piston diameter [mm]

10 10 10 16 16 16 20 20 20

Lift per gripper jaw [mm]

10 20 30 15 30 40 20 40 50

Material: Housing an jaws

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Material: Piston

Brass Brass Brass Brass Brass Brass Brass Brass Brass

Material: Plunger, gear rack, bevel

Steel Steel Steel Steel Steel Steel Steel Steel Steel

Weight [g]280 350 430 600 800 950 1000 1500 1700

Suitable sensors

GR04.202P GR04.202NGR04.280P GR04.280N

GR04.202P GR04.202NGR04.280P GR04.280N

GR04.202P GR04.202NGR04.280P GR04.280N

GR04.202P GR04.202NGR04.280P GR04.280N

GR04.202P GR04.202NGR04.280P GR04.280N

GR04.202P GR04.202NGR04.280P GR04.280N

GR04.202P GR04.202NGR04.280P GR04.280N

GR04.202P GR04.202NGR04.280P GR04.280N

GR04.202P GR04.202NGR04.280P GR04.280N

Continued on the next pageContinued on the next page

Page 46: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 044

Sheet metal handling | Parallel grippersParallel gripper for long strokes - piston diameter 10 - 20 mm

Dimensions

S

T

P

R

0,5*

* O

N

L M

W

W

F

C

D A

ØE

M5x0,8

M5x0,8

LX*

aa

X

Y

Z

b

* = LX: Distance gripper jaws - workpiece ** = From GR04.520: U=1 a = Compressed air connection

Item no.GR04.510 GR04.510-1 GR04.510-2 GR04.516 GR04.516-1 GR04.516-2 GR04.520 GR04.520-1 GR04.520-2

A [mm] 44 44 44 55 55 55 65 65 65

C M4x0,7x8 M4x0,7x8 M4x0,7x8 M5x0,8x10 M5x0,8x10 M5x0,8x10 M6x1x12 M6x1x12 M6x1x12

D [mm] 34 34 34 42 42 42 52 52 52

ØE [mm] 4,5 4,5 4,5 5,5 5,5 5,5 6,6 6,6 6,6

F [mm] M4x0,7x5 M4x0,7x5 M4x0,7x5 M5x0,8x7 M5x0,8x7 M5x0,8x7 M6x0,8x7 M6x0,8x7 M6x0,8x7

L [mm] 10 10 10 13 13 13 17 17 17

M [mm] 3 3 3 4 4 4 4,5 4,5 4,5

N [mm] 15 15 15 19 19 19 24 24 24

O [mm] 45,5 45,5 45,5 57,5 57,5 57,5 69 69 69

P [mm] 34 34 34 43 43 43 54 54 54

R M4x0,7 M4x0,7 M4x0,7 M5x0,8 M5x0,8 M5x0,8 M6x1 M6x1 M6x1

S [mm] 7 7 7 8 8 8 10 10 10

T [mm] 20 20 20 25 25 25 30 30 30

W open [mm] 90 132 170 116 188 228 147 247 287

W closed [mm] 70 92 110 86 128 148 107 157 187

X [mm] 51 67 85 60 90 110 71 113 133

Y [mm] 36 52 70 45 75 95 58 100 120

Z [mm] 36 52 70 45 75 95 58 100 120

b open [mm] 100 142 180 128 200 240 160 260 300

Page 47: VentuzeCreated Date: 10/15/2013 4:43:17 PM

45www.fi pa.com

Sheet metal handling | Parallel grippers Parallel gripper for long strokes - piston diameter 10 - 20 mm

In this catalogue you will find a selection of

products for the sheet metal handling.

For our complete range of products and more

information see www.fipa.com.

Diagrams

> Opening and closing strokes Ø 10 - versions 1 & 2 > Opening and closing strokes Ø 10 - Standard version

Gri

ppin

g fo

rce

[N]

0

25

30

20

15

10

5

0

35

Distance LX [mm]40 80

6 bar

20 60

5 bar

4 bar

3 bar2 bar

Gri

ppin

g fo

rce

[N]

0

25

30

20

15

10

5

0

35

Distance LX [mm]40 80

6 bar

20 60

5 bar

4 bar

3 bar

2 bar

> Opening and closing strokes Ø 10 - versions 1 & 2 > Opening and closing strokes Ø 16 - Standard version

Gri

ppin

g fo

rce

[N]

0

50

40

30

20

10

0

Distance LX [mm]

80

6 bar

40

5 bar

4 bar

3 bar

2 bar

6 bar

5 bar

4 bar

3 bar3 bar

2 bar2 bar

20 60 100

60G

ripp

ing

forc

e [N

]

0

50

40

30

20

10

0

Distance LX [mm]

80

6 bar

40

5 bar

4 bar

3 bar

2 bar

6 bar

5 bar

4 bar

3 bar3 bar

2 bar2 bar

20 60 100

60

> Opening and closing strokes Ø 10 - versions 1 & 2 > Opening and closing strokes Ø 20 - Standard version

Gri

ppin

g fo

rce

[N]

0

100

80

60

40

20

0

Distance LX [mm]

80 140

6 bar

40 120

5 bar

4 bar

3 bar

2 bar

6 bar

5 bar

4 bar

3 bar

2 bar

20 60 100

Gri

ppin

g fo

rce

[N]

0

100

80

60

40

20

0

Distance LX [mm]

80 140

6 bar

40 120

5 bar

4 bar

3 bar

2 bar

6 bar

5 bar

4 bar

3 bar

2 bar

20 60 100

Page 48: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 046

Sheet metal handling | GrippersGrippers – Series 100

Grippers - Series 100

GR04.100, GR04.102 and GR04.103 without sensor GR04.101A and GR04.104 with sensor

Product Description

> Versatile use due to compact shape and large jaw opening > Maximum reliability thanks to high closing force and robust construction > High wear resistance due to Hartcoat® treated surface > GR04.100 and GR04.104: Safe gripping to 100% gap-free closing gripper jaws > GR04.101A: High process safety due to large part detection > GR04.102: Dual-action (separate opening and closing control) for fast cycle time > GR04.103: Flexible use due to replaceable gripper jaws > GR04.104: Indirect part detection (sensor activated when no part is gripped)

Ordering notes

> GR04.101A, GR04.101A/NPN and GR04.104, GR04.104/NPN: Sensor and 0,2 m with 3-pole M8 connector cable included in delivery

Technical Data

Item no.

Principle of operation

Sensor Closing force at 6 bar [N]

Operating pressure [bar]

Weight [g] Suitable accessories

GR04.100 Single -- 22 2,5 - 8 48 --

GR04.101A Single Yes 22 2,5 - 8 48Sensor GR04.203P Connector cable 20.503

GR04.101A/NPN Single Yes 22 2,5 - 8 48Sensor GR04.203N Connector cable 20.503

GR04.102 Double -- 20 2,5 - 8 49 --

GR04.103 Single -- * 2,5 - 8 44

Gripper jaws GR04.103-1 Gripper jaws GR04.103-2Gripper jaws GR04.103-3Gripper jaws GR04.103-4

GR04.104 Single Yes 22 2,5 - 8 53Sensor GR04.203PConnector cable 20.503

GR04.104/NPN Single Yes 22 2,5 - 8 53Sensor GR04.203N Connector cable 20.503

* = The closing force depends on the geometry of the gripper jaws.

Wiring diagram sensors

BU

BK

BN

Power

+

-

RL+

Power

-BU

BK

BN

RL

GR04.203NGR04.203P

BN = Brown, BK = Black, BU = Blue

MA

IN C

IRCU

IT

MA

IN C

IRCU

IT

GR04.101A, GR04.104: LARGE AREA PART DETECTION

Page 49: VentuzeCreated Date: 10/15/2013 4:43:17 PM

47www.fi pa.com

Sheet metal handling | GrippersGreifzangen – Serie 100

Large area part detection

Direct part detection GR04.101A, GR04.101A/NPN - indirect part detection GR04.104, GR04.104/NPN

Dimensions

ØA

B

D

E

F

G

G1

M5

M5

IJ

K

L

M

N

R

S

C

111

I G1

B

N

Ø AKE

L

D

M5

M5 M

111

GR04.100 GR04.101A/NPN | GR04.101A

F

Ø AKE

CL

N

G1

GB

I

J

M5

M5

MD

111

111111111

G1

N

D LC

Ø AKE

F

IJ

OP M4

M5

MM5

G

B

GR04.102 GR04.103

Ø A

B

C

D

E

F

G

G1

M5

I

J

K

L

M

N

111

GR04.104/NPN | GR04.104

1 = Compressed air connection

Continued on the next page

Page 50: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 048

Sheet metal handling | GrippersGrippers – Series 100

Item no.

ØA [mm]

B [mm]

C [mm]

D [mm]

E [mm]

F [mm]

G [mm]

G1 [mm]

I [mm]

J [mm]

K [mm]

L [mm]

M [mm]

N [mm]

O [mm]

P [mm]

R [mm]

S [mm]

GR04.100 10 33 15 5 30 81 20 0 8 15 16 4 4,3 23 -- -- 24 5,5

GR04.101A 10 35 15 5 30 81 23 1 8 15 16 4 4,3 23 -- -- -- --

GR04.101A/NPN 10 35 15 5 30 81 23 1 8 15 16 4 4,3 23 -- -- -- --

GR04.102 10 35 15 19 30 81 24 0 8 15 16 4 4,3 23,5 -- -- -- --

GR04.103 10 33,4 15 5 30 62 33,4 18 8 15 16 4 4,3 5 3 8 -- --

GR04.104 10 36 15 5 30 82 24 0 8 15 16 4 4,3 23 -- -- -- --

GR04.104/NPN 10 36 15 5 30 82 24 0 8 15 16 4 4,3 23 -- -- -- --

In this catalogue you will find a selection of

products for the sheet metal handling.

For our complete range of products and more

information see www.fipa.com.

Page 51: VentuzeCreated Date: 10/15/2013 4:43:17 PM

49www.fi pa.com

Sheet metal handling | GrippersJaws for GR04.103 - for modular adjustmen

Jaws for GR04.103 - for modular adjustment

Product Description

> Long life and high reliability due to Hartcoat® treated surface > Flexible adjustment of the gripper to the product as well as changing product requirements

Technical Data

Item no.

Closing force [N]

Weight [g]

Application benefit Suitable HNBR elastomer

GR04.103-1 * 40 Several unique designs are possible, e.g. complementary shape of the item to be handled --

GR04.103-2 23 14 Safe and secure grip, Prism shape --

GR04.103-3 23 14 Safe and secure grip, Prism shape / „V“- shape --

GR04.103-4 23 14 Delicate gripping of sensitive components, films and much more. Temperature range up to about 140°C. GR04.103-4HNBR

Dimensions

A

BC

A

BC

D

GR04.103-1 GR04.103-2

A

BC

D

A

EB

C

GR04.103-3 GR04.103-4

* = The closing force depends on the geometry of the special customer-specific jaws.

Item no.

A [mm] B [mm] C [mm] D [mm] E [mm]

GR04.103-1 20 40 8 -- --

GR04.103-2 19 25 8 2 --

GR04.103-3 19 25 8 2 --

GR04.103-4 19,5 25 8 -- 20

Page 52: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 050

Sheet metal handling | Vacuum generationInline ejector EIL, expandable

Inline ejector EIL, expandableNozzle diameter 0.5 - 0.9 mm

Product Description

> Used e.g. for the separation of sheet metal > Light-weight and compact construction

> High suction power for short evacuation times and reduced gripping time> Simple installation directly on the vacuum cup> Installation even in confined spaces> Extremely high mechanical resistance > M5 threaded connection for vacuum switches or blow-off function possible with outlet I18 = G1/8-IG (see ordering notes)

Technical Data

Item no.Nozzle diameter [mm]

Optimal feed pressure [bar]

Final vacuum [%]

Suction power [Nl/min]

Air consumption [Nl/min]

Usage temperature [°C]

Weiht [g] Suitable silencers

EIL.05 0,5 5 87 7 12 -10 - 80 20 72.045

EIL.07 0,7 5 90 14 21 -10 - 80 20 72.045

EIL.09 0,9 5 90 21 36 -10 - 80 20 72.045

Please specify when ordering

1.: Type

EIL.EIL.EIL

Example: EIL.07-M6(Mini-Ejector EIL., nozzle diameter 0,7 mm, with Vacuum output M6-female)

2.: Nozzle diameter

05 ø 0,5 mm

07 ø 0,7 mm

09 ø 0,9 mm

3.: Vacuum output

M6 M6-femalM6-femalM6 e

A18 G1/8-male

A14 G1/4-male

I18 G1/8-female

I14 G1/4-female

Type + nozzle diameter + Vacuum output

4.: No. in drawing

M6 b

A18 d

A14 e

I18 i

I14 h

Evacuation time [sec.] for 1 liter at vacuum level

Item no. 10 % 20 % 30 % 40 % 50 % 60 % 70 % 80 % 85 %

EIL.05 0,92 1,96 3,18 4,63 6,38 8,79 12,17 18,96 27,39

EIL.07 0,46 0,98 1,58 2,28 3,13 4,27 5,8 8,55 11,01

EIL.09 0,31 0,65 1,05 1,52 2,09 2,85 3,87 5,7 7,34

Page 53: VentuzeCreated Date: 10/15/2013 4:43:17 PM

51www.fi pa.com

Sheet metal handling | Vacuum generationInline ejector EIL, expandable

Dimensions

a

b

c

f

g

h

a

a

a

e

a

i

d

Diagrams

> Vacuum against operating pressure > Suction power against operating pressure

Vacu

um [

%]

0 1 20

Feed pressure [bar]3 4 5 6

80

60

40

20

100

EIL.07 | EIL.09

EIL.05

Thro

ughp

ut [

Nl/

min

]

0 1 20

Feed pressure [bar]3 4 5 6

80

60

40

20

100

EIL.09

EIL.07

EIL.05

> Air consumption against operating pressure > Suction power against vacuum level

Thro

ughp

ut [

Nl/

min

]

0 1 20

Feed pressure [bar]3 4 5 6

40

30

20

10

50

EIL.09

EIL.07

EIL.05

Thro

ughp

ut [

Nl/

min

]

0 20 400

Vacuum [%]60 80 100

12

9

6

3

15

18

21

EIL.09

EIL.07

EIL.05

a = Compressed air input G1/4, depth 10 mm

b = Vacuum output M6, depth 6 mm

c = Vacuum cup example d = Vacuum output G1/8, depth 7.5 mm

e = Vacuum output G1/8, depth 10 mm

f = Compressed air g = Exhaust h = Hex. nut (SW14) i = Hex. nut (SW19)

Page 54: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 052

Sheet metal handling | Vacuum generationInline ejector EIL, expandable

Inline ejector EIL, expandableNozzle diameter 1.0 - 1.4 mm; with silencer

Product Description

> Used e.g. for the separation of sheet metal > Light-weight and compact construction

> Installation directly on the vacuum cup> Reduced gripping time> Extremely high mechanical resistance> Optionally:

- Silencer with direct opening (Item no. 72.037): contamination-proof, more comfortable frequency response at higher values of pressure- Closed diffuser silencer (Item no. 72.036)

Technical Data

Item no.

Nozzle diameter [mm]

Optimal feed pressure [bar]

Final vacuum [%]

Suction power [Nl/min]

Air consumption [Nl/min]

Usage temperature [°C]

Suitable accessories

Suitable accessories

EIL.10 1 5 90 27 44 -10 - 80 50

Silencers 72.036 Silencers 72.037 Blow-off device 32.660Check valve 32.638

EIL.12 1,2 5 90 45 66 -10 - 80 50

Silencers 72.036 Silencers 72.037 Blow-off device 32.660 Check valve 32.638

EIL.14 1,4 5 90 64 108 -10 - 80 50

Silencers 72.036 Silencers 72.037 Blow-off device 32.660 Check valve 32.638

Please specify when ordering

1.: Type 2. Nozzle diameter 3.: Vacuum output 4.: Silencer

EIL. 1. 1EIL. 1EIL 0 ø0 ø. 10 ø. 1 1,0 mm A14

M10

G1/4- AG

M10x125-AG

G

O

72.036

72.03712 ø 1 ,2 mm

14 ø 1 ,4 mm

Example: EIL.12-M10G

(Inline ejector EIL, nozzle diameter: 1,2 mm, vacuum output M10x125 male thread with silencer 72.036)

Type + Nozzle diameter + Vacuum output + Silencer = Item number

Evacuation time [sec.] for 1 liter at vacuum level

Art.-Nr.

10 % 20 % 30 % 40 % 50 % 60 % 70 % 80 % 85 %

EIL.10 0,24 0,51 0,82 1,18 1,62 2,21 3,01 4,43 5,71

EIL.12 0,14 0,3 0,49 0,71 0,97 1,33 1,81 2,66 3,42

EIL.14 0,1 0,21 0,34 0,5 0,68 0,93 1,27 1,85 2,44

Page 55: VentuzeCreated Date: 10/15/2013 4:43:17 PM

53www.fi pa.com

Sheet metal handling | Vacuum generationInline ejector EIL, expandable

Dimensions

a

a

c

c

b

d

2264

43

35

M5

39

7,5

14,5

G 1

/4

Ø 18

G1/4

21

22

64

43

M5

7,5

39 8

35

M10

x125

Ø 18

G 1/4

21

Diagrams

> Vacuum against operating pressure > Suction power against operating pressure

Vacu

um [

%]

0 1 20

Feed pressure [bar]3 4 5 6

80

60

40

20

100

EIL.10 | EIL.12 | EIL.14

Thro

ughp

ut [

Nl/

min

]

0 1 20

Feed pressure [bar]3 4 5 6

80

60

40

20

100

EIL.10

EIL.12

EIL.14

> Air consumption against operating pressure > Suction power against vacuum level

Air

con

sum

ptio

n [N

l/m

in]

0 1 20

Feed pressure [bar]3 4 5 6

80

100

120

60

40

20

140

EIL.10

EIL.12

EIL.14

Thro

ughp

ut [

Nl/

min

]

0 20 400

Vacuum [%]60 80 100

40

30

20

10

50

60

70

EIL.10

EIL.12

EIL.14

a = Blow-off or vacuum switch connection b = Silencers c = Vacuum d = Hex. nut (SW19)

Page 56: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 054

Sheet metal handling | Vacuum generationEjector with blow-off boost

Ejector with blow-off boost

Application example: ejector EBA.08H.2-A with digital mini vacuum switch 20.040, closed diffusor silencer 72.000 and flat vacuum cup Ø 40 mm

Product Description

> Used in sheet metal proccessing, e.g. pressing plants, body shell, destacker > Vacuum generator with integrated blow-off valve > Easy installation directly on the vacuum cup for fast vacuum set-up > Very fast response time for very short cycle times > Blow-off with boost effect:- In addition to the blow-off air from the compressed air line, up to ~70 liters/min is taken in from the atmosphere via the exhaust- This enables extremely rapid blow-off, saves up to 50% compressed air, and the workpiece is placed gently and precisely (see example for evacuation /blow-off time: vacuum cup with a 30 mm diameter and 60% vacuum level)

> Small, compact light weight design > Ideally suited for robotic applications with fast cycle times, such as Delta robot (Flexpicker, etc.) > Robust and very durable with > 100 million operations > M5 connection for digital mini vacuum switch to ensure reliable process monitoring > Patented design

Ordering notes

> Included in delivery: control cable 20.550, lenght 1,5 meter, 2-wire, free end

Technical Data

Item no. EBA.08H.2-A

Nozzle diameter [mm] 0,8

Optimal feed pressure [bar] 5

Max. feed pressure [bar] 8

Suction power at 5 bar [Nl/min] 25

Air consumption at 5 bar [Nl/min] 30

Flow rate solenoid valve [Nl/min] 15

Blow-off volumes of flow [Nl/min] 110 - 45

Final vacuum [%] 85

Power-on time solenoid valve (ED) [%] 100

Power-on/ -off time solenoid valve [ms] 5

Power consumption solenoid valve [W] 0,9

Protection class IP40

Usage temperature [°C] -10 - 50

Weight [g] 35

Suitable accessories Vacuum switch 20.040 (PNP), 20.041 (NPN); Silencers 72.000 (closed), Silencers 72.028 (open); Control cable 20.550

NEW VERY SHORT RESPONSE TIME, SAFE AND GENTLE PRODUCT RELEASE

Page 57: VentuzeCreated Date: 10/15/2013 4:43:17 PM

55www.fi pa.com

Sheet metal handling | Vacuum generationEjector with blow-off boost

Control cable 20.550

Blow-off with boost-effect

80 % Vacuum

Ambient air that is takenin via the exhaust

Flow rate solenoid valve15 Nl/min

Ejector flow rate30 Nl/min

Air flow blow-off

0 % Vacuum = atmospheric pressure

Vacuum in the suction cup

Boos

t-ef

fect

Evacuation -/ blow-off time

Evacuation / blow-off time 1 liter volume up to % vacuum / atmospheric pressure [sec.]

0 → 50 % / 50 % → 0 0 → 60 % / 60 % → 0 0 → 70 % / 70 % → 0

1,8 / 0,5 2,5 / 0,56 3,9 / 0,61

Evacuation / blow-off time: example with Ø 30 mm flat suction cups, volume 1.7 cc up to % vacuum / atmospheric pressure [ms]

0 → 50 % / 50 % → 0 0 → 60 % / 60 % → 0 0 → 70 % / 70 % → 0

3 / < 1 4 / < 1 7 / 1

Dimensions

*

a

b

c

5013

42

a = Compressed air connection b = Vacuum connection c = Exhaust outlet * = M5 connection for vacuum switches

Page 58: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 056

Sheet metal handling | Notes

Notes:

Page 59: VentuzeCreated Date: 10/15/2013 4:43:17 PM

57www.fi pa.com

Sheet metal handling | Vacuum generationEjectors with air saving function EMA

Ejectors with air saving function EMADouble energy efficient by integrated pressure control and electronic air saving function

Energy saving ejector EMA.90X14-NC-AVA with bellows vacuum cup and workpiece

Product Description

> Used in sheet metal proccessing, e.g. pressing plants > Handling of dense workpieces > Integrated electronic air-saving system (LSA)- Reduces operating costs from 60 up to 97% with dense workpieces- Automatically adjusts to workpiece type (activiation with dense workpieces, deactivation with higher porosity or uneven surfaces)

> Integrated pressure control- Automatic pressure regulation to 3,5 bar constant- Significantly reduces operating costs up to 50 % also with porous workpieces- Air saving potential increases with difference between supply pressure and operation pressure

> Available versions normally open (NO) or normally closed (NC) > Reduced sound level through integrated open silencer ( ~ 68 dBA without automatic air-saving system, ~ 0 dBA with active automatic air-saving system) > Dirt-proof construction, no filter required > Easy setting via keyboard, operational status and fault detection via display

Note

Version NC:If the ejector experiences power failure, the workpiece is only held by the vacuum between non-return valve and product surface. Vacuum and blow-off are controlled using a single signal.Version NO:Higher security, the vacuum continues to be generated during power failure and this holds the workpiece in place

Technical Data

Item no. Noz

zle

dia

met

er

[mm

]

Suct

ion

pow

er

[Nl/

min

]

Air

con

sum

ptio

n [N

l/m

in]

Fin

al v

acu

um

[%]

Opt

imal

fee

d p

ress

ure

[ba

r]

Wor

kin

g p

ress

ure

[b

ar]

Usa

ge

tem

per

atu

re

[°C]

Cont

rol v

olta

ge

Curr

ent

con

sum

ptio

n fo

r va

cuu

m a

nd

blo

w-

off

feat

ure

[m

A]

Prot

ecti

on c

lass

Wei

ght

[g]

Suit

able

con

nec

tor

cab

le

EMA.90x10 1,0 29 44 90 4 - 8 3,5 10 - 60 24 V DC (adjusted) ± 10% 30 (0,7 W) IP65 130

20.501 20.502 20.50320.507

EMA.90x12 1,2 45 65 90 4 - 8 3,5 10 - 60 24 V DC (adjusted) ± 10% 30 (0,7 W) IP65 130

20.501 20.502 20.50320.507

EMA.90x14 1,4 70 90 90 4 - 8 3,5 10 - 60 24 V DC (adjusted) ± 10% 30 (0,7 W) IP65 130

20.501 20.502 20.50320.507

UP TO 97 % ENERGY SAVING

Continued on the next page

Page 60: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 058

Sheet metal handling | Vacuum generationEjectors with air saving function EMA

Pneumatic Diagram

NC NO

Solenoid valve N.C. Solenoid valve N.O.

Operating principle EMA series

a

b

cd

e

f

g

qs

h

i

°

1. Gripping of the itemThe vacuum-solenoid valve b starts the cycle Venturi tubes c are supplied with compressed air and generate the vacuum to grip the item quickly with the suction gripper -> short-term energy consumption.

2. Operations on the suctioned itemThe vacuum level is continually monitored by the vacuum switch f. When the vacuum threshold limit V1 (65%) is reached the signal “Item suctioned” is triggered. This gives a green light for the scheduled operation (transfer, processing etc.). If the vacuum reaches the threshold limit V2 (75%), the compressed air supply to the Venturi tubes via the solenoid valve e is interrupted. Energy consumption falls to nil. The item remains suctioned because of the vacuum that remains because of the closed non-return valve. Tiny leakages often lead to a slow release of the vacuum. If the vacuum falls to the threshold limit of 65%, a new vacuum is briefly generated, i.e. until the threshold limit V2 (75%) is reached.

3. Depositing of the workpieceAt the end of the procedures blow-off is triggered. The blow-off valve h generates an air jet that closes the blocking valve °. This blows off the item using the air pressure regulator i so that it can be deposited more quickly.

OUT IN

„LSA“ Air-saving system

%VVmax=90%

V2=75%V1=65%

e

e

dcb

a

g

fh i

°

a

a

b

d 0

0

c

b

Page 61: VentuzeCreated Date: 10/15/2013 4:43:17 PM

59www.fi pa.com

Sheet metal handling | Vacuum generationEjectors with air saving function EMA

Nozzle diameter and energy saving

Without automatic air-saving system With automatic air-saving system

Nozzle diameter[mm]

Suction power [Nl/min]

Air consumption[Nl/min]

Air consumption[Nl/min]

Suction duration(65% vacuum) [sec]

Suction duration(75% vacuum) [sec]

1

1,2

1,4

29

45

70

44

65

90

2,38

1,53

0,99

3,33

2,15

1,38

2,2

2,2

2,2

> Automatic air-saving system activation allows a larger tube diameter to grip more quickly without increased consumption.

Air Saving control cycle self-adaptation (LSA)

Cycle 1: Deals with an air tight product under the influence of LSA, resulting in optimum energy savings.

Cycle 2: The porous product generates leaks that provoke repeated intermittent vacuum regeneration. The anomaly is automatically detected, and the cycle goes on but without LSA. A LSA missing signal is then emitted and displayed, and production goes on.

Cycle 3: Illustrates the automatic return to the LSA cycle as soon as leaks are eliminated: air tight products, vacuum circuit maintenance.

The compact-ejektor EMA thus provides the maximum energy saving, without any limitations to the performance and functioning of the overall production system.

LSA

Cycle 3Cycle 2

no LSA„LSA missing

Cycle 1

Air Saving Function (LSA)

%VVmax=90%

V2=75%V1=65%

Phase DurationAir consumption

without "LSAwithout "LSAwithout "LSA" w" w" with "LSA"

Grip 0,28 s 0,4 Nl 0,4 Nl

1,20 s 1,8 Nl 0

Placement 0,14 s 0,2 Nl 0,2 Nl

2,4 Nl 0,6 Nl 75 %

Phase DurationAir consumption

without "LSAwithout "LSA" w" w" with "LSA"

air savingpotential

Fixation 0,55 s 0,8 Nl 0,8 Nl

60 s 90 Nl 0

Placement 0,14 s 0,2 Nl 0,2 Nl

91 Nl 1,0 Nl 99 %

Fixation + Operation process (Nozzle Ø 1,4 mm, Evacuation of 0,4 l)

Example of the air saving potential

The examples show how the automatic air saving function „LSA“ reduces the energy demand:> 75% energy saved during product transfer > 99% energy saved during holding products while they are further processed or treatedThe investment will often amortize itself within a couple of months.

Operation processTransfer

Gripping + Transfer (Nozzle Ø 1,4 mm, Evacuation of 0,2 l)

air savingpotential

Continued on the next page

Page 62: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 060

Sheet metal handling | Vacuum generationEjectors with air saving function EMA

Wiring diagram

Adjustable side exitSignal without LSA+5V normally-closed contact (NO)

OR (setting)

Signal “Vacuum level“ analogue 1 to 5V DC

Signal “Item gripped“ 24V DC switch output normally-closed contact (NO)

OUT IN

24 V DCconstant

Power supply

0 V

24 V DCvacuum

24 V DCBlow-off

Automatic delayed blow-off1 single control signal: Stopping the vacuum triggers blow-off with a delay that can be set at 0 to 3 seconds.

OR (setting, only with

closed NC model)

0 VControlled blow-off via specific Signal2 control signal: “Vacuum” and “Blow-off”

24 V DCvacuum

0 V

Plug wiring1: brown2: white3: blue4: black

> Output signal "object gripped", 24 VDC, Switching output NO, switching current 125 mA, PNP> Adjustable side output: 1. Signal without air saving function, +5V switching output NO: eg. signal for failure indication 2. Signal "vacuum level", analog, 1-5 VDC of metering range

Please specify when ordering

1.:

Type

2.: Vacuum Level

X

3.: Nozzle Diameter 4.: Switching Function 4.: Block Mounting

EMA.10 Ø 1, 0 mm

12 Ø 1, 2 mm

14 Ø 1, 4 mm

Type + Vacuum level x Nozzle diameter + switching function + AVA + block mounting = Item number

Every model is equipped with a controlled blow-off function and an electronic display. Example: EMA.90x14-NO-AVA-X2 oder EMA.90x12-NC-AVA-X7

Suitable connector cables for vacuum switch:20.501: M8 thread, female, 4-pin, straight plug, cable length 5 m20.502: M8 thread, female, 4-pin, 90° elbow plug, cable length 5 m

Suitable connector cables for vacuum valve and blow-off control:20.501: M8 thread, female, 4-pin, straight plug, cable length 5 m20.502: M8 thread, female, 4-pin, 90° elbow plug, cable length 5 m

90 max. 90%Vacuum

NO

NC

X1-X9max. 9 moduleby Nozzle-Ø 10

maximal 7 module by Nozzle-Ø 12

maximal 5 module by Nozzle-Ø 14

X1-X5

X1-X7

normally-open

normally-closed

AVA

Page 63: VentuzeCreated Date: 10/15/2013 4:43:17 PM

61www.fi pa.com

Sheet metal handling | Vacuum generationEjectors with air saving function EMA

z = Compressed air connection q = Vacuum connection a = 2 Bore holes for 4mm screws b = M8 plug

c = 2 continuous screws d = Mounting plate with 4 screws (Item-number EMM.FIX-V)

e = Mounting plate for DIN rail with 4 screws (Item-number EMM.FIX-D) - on plate per EMM-modul

Dimensions and screwing-up options

> Mounting sideways > Mounting in the front

13,5

26

32,5

64,5

59,5

25

18,5

Ø6

Ø8

z

q

a

b

c

61

75 85

25

15

z

d

> Block mounting on a DIN rail > EMA.FIX-BEndpieces for complete island, with connecting screws and closing pins for collecting main

70,2

29,9

6,7

64,5

71,2

26 26

35

ze

Evacuation time [sec.] for 1 liter at vacuum level

Item no.

55 % 60 % 65 % 70 % 75 % 80 %

EMA.90x10 1,76 2,04 2,38 2,80 3,33 4,09

EMA.90x12 1,13 1,31 1,53 1,80 2,15 2,64

EMA.90x14 0,73 0,85 0,99 1,16 1,38 1,70

Page 64: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 062

Multi-chamber ejectorsHigh suction power for fast vacuum build up in particular with porous workpieces

Application example: Multi-chamber ejector with vacuummeter 91.001 (mounting on front or rear side)

Application example multi-chamber ejector 65.340-LSE with air saving function

Product Description

> Used in sheet metal proccessing, e.g. body shell > High efficiency level for maximum vacuum at low pressures, and thus particularly efficient use of compressed air as well as suitability for fluctuating air pressure Levels

> Handling of air-permeable products, or for high leakage > High suction power for short evacuation times and fast vacuum build-up > Noise-optimized operation due open silencer > Industries: for example, packaging and printing industry

Air saving function LSE > Saving compressed air during handling of vacuum-tight products > Examples of application:Automatic switching off of vacuum generation during pick-and-place applications of vacuum-tight workpieces if, e.g. downstream processes are delayedSaving compressed air when using the multi-chamber ejectors for feeding vacuum tanks

Notes

Construction/operation LSE: > Combination of pneumatic control valve with spring return and normally closed (NC) pneumatic vacuum switch > Setting target vacuum values by means of setting screw > The compressed air is conveyed through the valve to the compressed-air inlet of the injector; there is a partial airflow at input 1 of the vacuum switch. > When the set target vacuum is reached, the vacuum switch opens, the compressed air from input 1 is conducted to the control valve via output 2 and closes this – the vacuum generation is now stopped

> If the vacuum sinks to the hysteresis value (see table), the vacuum switch closes again and the spring effect opens the control valve – vacuum generation is activated again

> Please note: The air-saving function does not work with air-permeable products, or in the case of high leakage

Ordering notes

> Seals are available in NBR as standard > Seals are optionally available in EPDM or Viton upon request > Delivery includes two mounting brackets and G1/4“-AG - Ø 10 mm push-in fitting for compressed air connection

Technical Data

Item no. 65.340 65.350 65.360 65.370 65.380 65.390

Optimal feed pressure [bar] 3,4 3,4 3,4 3,4 3,4 3,4

Max. feed pressure [bar] 7 7 7 7 7 7

Final vacuum at 3,4 bar [%] 92 92 92 92 92 92

Final vacuum at 6 bar [%] 89 89 89 89 89 89

Suction power at 3,4 bar [Nl/min] 360 600 760 850 1150 1200

Suction power at 6 bar [Nl/min] 420 700 950 1010 1400 1500

Air consumption at 3,4 bar [Nl/min] 116 230 365 445 545 655

Air consumption at 6 bar [Nl/min] 185 370 610 720 780 810

Evacuation time 1 liter from 0 to 70 % at 3,4 bar [s]

0,95 0,5 0,46 0,27 0,2 0,23

Evacuation time 1 liter from 0 to 70 % at 6 bar [s]

0,62 0,35 0,31 0,19 0,19 0,2

Sheet metal handling | Vacuum generationMulti-chamber ejectors

NEW

Page 65: VentuzeCreated Date: 10/15/2013 4:43:17 PM

63www.fi pa.com

Sheet metal handling | Vacuum generationMulti-chamber ejectors

Item no. 65.340 65.350 65.360 65.370 65.380 65.390

Vacuum switch hysteresis at LSE [mbar] 120 120 120 120 120 120

Noise level with silencer [dB] 60 - 65 60 - 65 60 - 65 60 - 65 60 - 65 60 - 65

Usage temperature [°C] -20 - 80 -20 - 80 -20 - 80 -20 - 80 -20 - 80 -20 - 80

Weight incl. silencer [g] 690 690 880 880 1160 1160

Suitable accessoriesVacuum meterVacuum switchCheck valveDouble nippleCompressed air saving sysem

91.001 20.021 32.662270.138, 270.148MKE-LSE-NC

91.001 20.021 32.662270.138, 270.148MKE-LSE-NC

91.001 20.021 32.662270.138, 270.148MKE-LSE-NC

91.001 20.021 32.662270.138, 270.148MKE-LSE-NC

91.001 20.021 32.662270.138, 270.148MKE-LSE-NC

91.001 20.021 32.662270.138, 270.148MKE-LSE-NC

Dimensions

B3764 67 54

118,5

17,5

40

193

5342

1715

9

G1/8

a

G3

G2

G1

G1b

c

zq

s

a = Air saving function (optional) b = Connection vacuum meter and/or vacuum switch c = Vacuum meter (optional)

z = Compressed air connection q = Vacuum connection s = Exhaust outlet

Item no. 65.340 65.350 65.360 65.370 65.380 65.390

B [mm] 45 45 65 65 85 85

G1 G1/4 G1/4 G1/4 G1/4 G1/4 G1/4

G2 G3/4 G3/4 G3/4 G3/4 G1 G1

G3 G3/4 G3/4 G3/4 G3/4 G1 G1

Technical Data

Please specify when ordering

Item no.

65.340 -LSE

Air saving function LSEThis is already built in for 65.340-LSE to 65.390-LSE.If the LSE is integrated in already delivered structurally identical ejectors without an air-saving function,a non-return valve, item No. 32.662, is necessary at the compressed air input. It is possible to convert anexisting ejector after consultation/confirmation with the technical sales department with FIPA.

For 65-380-LSE and 65.390-LSE:It is recommended you consult with the FIPA technical sales department as to whether an air-savingfunction makes sense in the application.

65.340 without air saving funktion

with air saving funktion

Design

Wiring diagram air saving function LSE

Multi-chamber ejectors

Pneumatic control valvePneumatic vacuum switch

Continued on the next page

Page 66: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 064

Sheet metal handling | Vacuum generationMulti-chamber ejectors

Diagrams > Air consumption against operating pressure > Suction power against operating pressure

Air

con

sum

ptio

n [N

l/m

in]

3,4

500

600

400

300

200

100

0

700

Feed pressure [bar]5 6

65.340

800

65.350

65.360

65.370

65.38065.390

Thro

ughp

ut [

Nl/

min

]

3,4

1000

1200

800

600

400

200

0

1400

Feed pressure [bar]5 6

65.340

1600

65.350

65.3606

65.3706

65.380665.390

> Vacuum level against operating pressure

Vacu

um le

vel [

%]

0

Feed pressure [bar]

80

60

40

20

100

3 4 5 6

65.340 | 65.350 | 65.360 | 65.370 | 65.380 | 65.390

Recommended inner diameter [mm] for hoses up to length 2 meter

Air supply Vacuum Exhaust

65.340

65.350

65.360

65.370

65.380

65.390

Item no.

> 4

> 6

> 8

> 8

> 10

> 10

> 12

> 15

> 19

> 19

> 25

> 25

> 12

> 15

> 22

> 22

> 32

> 32

65.340-LSE

65.350-LSE

65.360-LSE

65.370-LSE

65.380-LSE

65.390-LSE

Page 67: VentuzeCreated Date: 10/15/2013 4:43:17 PM

65www.fi pa.com

Sheet metal handling | Vacuum generationMulti-chamber ejectors

Suction power [Nl/min] at vacuum Level (operating pressure 3,4 bar)

10 % 20 % 30 % 40 % 50 % 60 % 70 % 90 %

65.340

65.350

65.360

65.370

65.380

65.390

80 %Item no.

180

320

445

550

760

830

115

250

340

430

530

550

80

135

175

280

350

360

43

75

110

145

180

215

30

60

85

115

148

170

22,5

46

70

85

115

130

15,5

30

43

60

78

90

7,5

13

20

28

34,5

36

1,2

1,5

1,8

2,2

3,5

5

Suction power [Nl/min] at vacuum Level (operating pressure 6 bar)

10 % 20 % 30 % 40 % 50 % 60 % 70 % 90 %

65.340

65.350

65.360

65.370

65.380

65.390

80 %Item no.

240

510

710

800

1120

1110

125

290

380

460

560

630

100

195

285

385

490

560

82

160

230

310

355

385

65

115

170

215

260

315

38

70

100

125

150

210

12,5

22

32

42

50

65

3,5

8

11

15,5

25

26

--

--

--

--

--

--

Evacuation time [s/l] at vacuum level (operating pressure 3,4 bar)

10 % 20 % 30 % 40 % 50 % 60 % 70 % 90 %

65.340

65.350

65.360

65.370

65.380

65.390

80 %Item no.

0,022

0,014

0,012

0,01

0,006

0,005

0,06

0,031

0,029

0,025

0,015

0,013

0,11

0,06

0,058

0,043

0,029

0,027

0,21

0,1

0,095

0,075

0,052

0,045

0,4

0,2

0,18

0,11

0,085

0,07

0,65

0,34

0,31

0,19

0,145

0,105

0,95

0,5

0,46

0,27

0,202

0,23

1,6

0,8

0,89

0,45

0,33

0,46

4

2,5

1,5

1,2

1

0,9

Evacuation time [s/l] at vacuum level (operating pressure 6 bar)

10 % 20 % 30 % 40 % 50 % 60 % 70 % 90 %

65.340

65.350

65.360

65.370

65.380

65.390

80 %Item no.

0,018

0,01

0,009

0,007

0,005

0,003

0,05

0,022

0,019

0,018

0,013

0,009

0,08

0,048

0,045

0,038

0,026

0,014

0,18

0,08

0,075

0,055

0,045

0,030

0,25

0,11

0,13

0,08

0,062

0,060

0,4

0,2

0,18

0,12

0,115

0,095

0,62

0,35

0,31

0,19

0,194

0,2

1,55

0,78

0,7

0,47

0,56

0,8

--

--

--

--

--

--

Page 68: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 066

Sheet metal handling | Vacuum generationRotary vane vacuum pumps - oil-free

Rotary vane vacuum pumps - oil-freeHandling in dry areas

Product Description

> High reliability and low maintenance costs owing to simple assembly > Universal application: Continuous and alternating operation are easily possible > Compact design due to robust safety housing that also reduces the sound level > DT.140C-3: Universal motor according to IE class 2 with wide voltage spectrum for worldwide use

Ordering notes

> Electric cables not included > Scope of supply:- Safety filter on suction side - Silencer on pressure side

Technical Data

Item no. DT.100C-3 DT.140C-3

Suction power at 50 Hz [m³/h] 100 130

Suction power at 60 Hz [m³/h] 115 150

Final vacuum [mbar rel.] -880 -880

Power supply at 50 (60) Hz [V] Delta: 230 (265) Star: 400 (460) Delta: 230 (265) Star: 400 (460)

Current consumption at 50 (60) Hz [A] Delta: 11,8 (11,4) Star: 6,8 (6,6) Delta: 14,7 (13,5) Star: 8,5 (7,8)

Rated power at 50 Hz [KW] 3 4

Rated power at 60 Hz [KW] 3,6 4,8

Noise level at 50 Hz [dB(A)] 70 70

Noise level at 60 Hz [dB(A)] 72 72

Operating temperature at 50 Hz [°C] 78 - 82 80 - 83

Operating temperature at 60 Hz [°C] 80 - 85 85 - 90

Weight [kg] 87 95

Suitable accessories Pre-filter FC 40F Spare part kit KIT-DT.100C

Pre-filter FC 50F Spare part kit KIT-DT.140C

Page 69: VentuzeCreated Date: 10/15/2013 4:43:17 PM

67www.fi pa.com

Sheet metal handling | Vacuum generationRotary vane vacuum pumps - oil-free

In this catalogue you will find a selection of

products for the sheet metal handling.

For our complete range of products and more

information see www.fipa.com.

Dimensions

� �

363

30527,5

30

348

(DT.

100C

-3)

- 36

2 (D

T.14

0C-3

)

810 (DT.100C-3) - 830 (DT.140C-3)

132

G 1 1/2“

154

34810

174

G 1 1/2“

382

Diagrams

> Suction power against degree of evacuation at 50 Hz > Suction power against degree of evacuation at 50 Hz

Suct

ion

pow

er [

m3 /

h]

0

160

120

80

40

0

Pressure (absolute) [mbar]

DT.140

DT.100

100 500300 700 900 1000

Suct

ion

pow

er [

m3 /

h]

0

160

120

80

40

0

Pressure (absolute) [mbar]

DT.140

DT.100

100 500300 700 900 1000

Page 70: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 068

Sheet metal handling | Vacuum generationRotary vane vacuum pumps – oil-lubricated

Rotary vane vacuum pumps – oil-lubricated

Product Description

> Very high final vacuum > For continuous operation in the pressure range of 60 - 99.95 % vacuum, gas ballast available; can tolerate water vapor > Suitable for moist environments > Effective damping and recovery system with by-pass and novel float valve guarantees oil-free exhaust air > Innovative sealing system prevents oil recirculation at standstill under vacuum > Elastic motor coupling effectively absorbs schocks > Universal motor according to IE class 2 with wide voltage spectrum for worldwide use > Horizontal mounting position

Ordering notes

> Scope of supply: Condensate exhaust filter, gas ballast, oil non-return valve, oil SW 100

Technical Data

Item no. DO.105C-3 DO.150C-3 DO.205C-3 DO.305C-3

Suction power at 50 Hz [m³/h]

105 150 205 305

Suction power at 60 Hz [m³/h]

125 180 245 365

Final vacuum [mbar rel.] -999,5 -999,5 -999,5 -999,5

Gas ballast Yes Yes Yes Yes

Max inlet pressure for water vapour [mbar]

30 25 25 25

Steam capacity [l/hr] 2,2 2,5 3,5 5

Check valve Yes Yes Yes Yes

Power supply at 50 (60) Hz [V]

Delta: 230 (265) Star: 400 (460)

Delta: 230 (265) Star: 400 (460)

Delta: 230 (265) Star: 400 (460)

Delta: 230 (265) Star: 400 (460)

Current consumption at 50 (60) Hz [A]

Delta: 8,8 (9,0) Star: 5,1 (5,2)

Delta: 8,8 (9,0) Star: 5,1 (5,2)

Delta: 20 (20,3) Star: 11,6 (11,7)

Delta: 27,7 (26,8) Star: 16 (15,5)

Rated power at 50 (60) Hz [KW]

2,2 (2,7) 3 (3,6) 4 (4,8) 7,5 (8,6)

Noise level at 50 (60) Hz [dB(A)]

68 (70) 70 (72) 72 (74) 74 (76)

Operating temperature [°C]

75 - 85 75 - 85 70 - 80 75 - 85

Weight [kg] 70 82 154 164

Suitable accessories Pre-filter FB 40 Spare part kit KIT-DO.105C/G*Spare part kit KIT-DO.105C/K***

Pre-filter FB 50 Pre-filter FB 60 Spare part kit KIT-DO.150C/G*Spare part kit KIT-DO.150C/K***

Pre-filter FB 50 Pre-filter FB 60 Spare part kit KIT-DO.205C/G**Spare part kit KIT-DO.205C/K***

Pre-filter FB 60Spare part kit KIT-DO.305C/G**Spare part kit KIT-DO.305C/K***

* = Rubber link, seals, 3 vanes, FKM shaft seal, FKM O-rings, oil filter with bypass

** = Rubber link, FKM and NBR O-rings, 3 x vanes, oil recirculation pipe, gas ballast pipe, filters, oil inspection glas

*** = Oil filter with bypass valve, exhaust filter, gasket

Page 71: VentuzeCreated Date: 10/15/2013 4:43:17 PM

69www.fi pa.com

Sheet metal handling | Vacuum generationRotary vane vacuum pumps – oil-lubricated

Dimensions

382

110 51 10

249

707

390

283

706 (DO.105)

725 (DO.150)

G1 1/2

241,5

315

292

G1

1/4

DO.105C-3 | DO.150C-3

538

47525 323

455

M10279 (DO.205)349 (DO.305)

444

407

G2

G2

855 (DO.205)924 (DO.305)

Ø 50

DO.305C-3 | DO.205C-3

Diagrams

> Suction power against vacuum level at 50 Hz > Suction power against vacuum level at 60 Hz

Suct

ion

pow

er [

m3 /

h]

0

Pressure (absolute) [mbar] | logarithmic scale

200

150

100

50

250

DO.205

DO.150

DO.105

0,1 1 10 100 1000

300 DO.305

350

Suct

ion

pow

er [

m3 /

h]

0

Pressure (absolute) [mbar] | logarithmic scale

200

150

100

50

250DO.205

DO.150

DO.105

0,1 1 10 100 1000

300

DO.305350

Page 72: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 070

Sheet metal handling | Control technologyVacuum regulators with minimized external leakage

Vacuum regulators with minimized external leakage

Product Description

> Vacuum control of e.g. vacuum suction units in handling systems> Automatic compensation of pressure fluctuations in the vacuum supply> High precision stepless vacuum control via adjusting knob with locking mechanism> Suitable for leckage testing for measuring and test purposes> Comes with vacuum meter incl. R1/8 connection adapter

Technical Data

Item no.Maximum flow rate [m³/h]

Regulating range [bar] Accuracy [mbar] Operating temperature [°C]

Weight [g] Suitable vacuum meter

33.220 8,4 -1 - 0 < 1,3 5 - 60 135 91.001-R

33.230 14 -1 - 0 < 1,3 5 - 60 250 91.001-R

Dimensions

34

63

50

15,4 x 5,4

*

**

ab

40

66,4

65

8 x 6,5

ab

**

*

33.220 33.230

a Connection to the vacuum cup/product side (description SET), quick fitting outside-Ø 8 mm.

b Pump connection (description VAC), quick fitting outside-Ø 8 mm * = Plug connection ** = R1/8 Manometer connection

Page 73: VentuzeCreated Date: 10/15/2013 4:43:17 PM

71www.fi pa.com

Sheet metal handling | System monitoringElectronic vacuum switch with analog output

Electronic vacuum switch with analog output

Product Description

> Vacuum control in handling and automation systems> Small, lightweight and compact> Maximum overpressure: 3 bar> Analog output: 1-5 VDC> Plug with integrated LED display> Optional mounting rail 20.008-H with included channel nuts for fixing the vacuum switch, e.g. to FIPA Sline extrusions

Technical Data

Item no. Pres

sure

ran

ge

[bar

]

Sup

ply

vol

tag

e [V

DC]

Curr

ent

con

sum

ptio

n [m

A]

Prot

ecti

on c

lass

Res

pon

se t

ime

Swit

chin

g ou

tput

Con

nec

tion

Swit

chin

g lo

gic

Usa

ge

tem

per

atu

re [

°C]

Tem

per

atu

re

effe

ct

Suit

able

ac

cess

orie

s

20.007 -1 - 0 18 - 30 < 20 IP50 < 5 PNPPlug M8, 4-pin

NO 0 - +50+- 3 % of measuring range

Connector cable 20.501Connector cable 20.502Mounting rail 20.008-H

Dimensions

15

25

61,4

47

G1

/8

8

15

,4

Page 74: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 072

Sheet metal handling | System monitoringMini vacuum switch - digital

Mini vacuum switch - digital

Application example: ejector EBA.08H.2-A with digital mini vacuum switch 20.040, closed diffusor silencer 72.000 and flat vacuum cup Ø 40 mm

Product Description

> Switch outputs a digital signal when a specific vacuum level is reached > Vacuum level is manually set with a potentiometer screw > Hysteresis is fixed at 3 % of the signal set > Red LED indicates set level reached > Very small size > Swithcing output PNP (20.040) or NPN (20.041) > Incl. cable 1,5 m, 3-pole, open wire

Technical Data

Item no.

Switching output

Pressure range [bar]

Max. Over-pressure [bar]

Operating voltage [V DC]

Max. Current consump-tion [A]

Repeat accuracy

Response time [ms]

Hysteresis Protec-tion class

Vacuum connec-tion

Operating tempera-ture [°C]

Weight [g]

20.040 PNP -1 - 0 2 10,8 - 30 10≤ ± 1% F.S.

~ 13 % F.S. max

IP 40 M5 0 - 60 50

20.041 NPN -1 - 0 2 10,8 - 30 10≤ ± 1% F.S.

~ 13 % F.S. max

IP 40 M5 0 - 60 50

Wiring diagram

Brown

Black

Blue

Switchmaincircuit

NPN

Red

DC(+)

RL

DC10.8 ~ 30VOUT

DC(-)

PNP

Switchmaincircuit

Red

Brown

Black

Blue

DC(+)

RL

OUT

DC(-)

DC10.8 ~ 30V

Dimensions

26

10

22,5

8 mm

M5:M5*0,8

Page 75: VentuzeCreated Date: 10/15/2013 4:43:17 PM

73www.fi pa.com

Sheet metal handling | Control technologyVacuum switch - electronic with two digital outputs and display

Vacuum switch - electronic with two digital outputs and display

Product Description

> Monitoring of vacuum levels, e.g. in handling systems> Optimization of cycle times to improve the economy of vacuum systems> Two freely adjustable digital outputs to set lower and upper threshold values> Additional analog output> 7-segmet LED display> Protection class IP65 (no ventilation tube required)> Integrated reverse voltage protection> Compact, lightweight and robust design> UL, CSA certifications> High operation flexibility: control panel can be rotated 360° after installation

Technical Data Dimensions

Item no. Mea

suri

ng

ran

ge

[bar

]

Ove

rpre

ssu

re s

afet

y [b

ar]

Curr

ent

con

sum

ptio

n [m

A]

Dig

ital

sw

itch

ing

outp

uts

Max

imu

m s

wit

chin

g cu

rren

t [m

A]

Rep

eat

accu

racy

[m

bar]

Elec

tric

con

nec

tion

Op

erat

ing

tem

per

atu

re [

°C]

Sup

ply

vol

tag

e [V

]

Prot

ecti

on c

lass

Wei

ght

[g]

Suit

able

med

ia

Suit

able

Co

nn

ecor

cab

les

A [

mm

]

E [m

m]

G1

G2

G3

SW ØB

[m

m]

C [m

m]

20.021 -1 - 0 6 < 552x PNP (NO or NC)

125 +/- 2Plug M8x1, 4-pin

0-5011-30

IP65 25Dry, oil-free air and non-abrasive gases

20.50120.502

75,3 8 M8x1 G1/8 M5 16 -- --

20.022 -1 - 0 6 < 552x PNP (NO or NC)

125 +/- 2Plug M8x1, 4-pin

0-5011-30

IP65 45Dry, oil-free air and non-abrasive gases

20.50120.502

33 -- M8x1 G1/8 -- -- 30 37,5

Dimensions

G3

E

A

G1 G2

SW

q

G2 ØB

G1

C

A

q

20.021 20.022q = Vacuum connection

Page 76: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 074

Sheet metal handling | Notes

Notes:

Page 77: VentuzeCreated Date: 10/15/2013 4:43:17 PM

75www.fi pa.com

Sheet metal handling | System monitoringPressure gauge

Digital pressure gauge – connection at the bottom

G1

G2 ØB

A

C

z

Product Description

> Display range -1 to +1 bar> Calibration feature> Very compact> LCD display with selectable pressure units> Robust aluminium housing

Technical Data Dimensions

Item no. Sup

ply

vol

tag

e [V

D

C]

Curr

ent

con

sum

ptio

n [m

A]

Res

pon

se t

ime

[ms]

Insu

lati

on

resi

stan

ce [

mO

hm]

Elec

tric

al

con

nec

tion

Mou

ntin

g p

osit

ion

Usa

ge

tem

per

atu

re [

°C]

Ove

rpre

ssu

re [

bar]

EMI /

EM

C

Wei

ght

[g]

Suit

able

Co

nn

ecto

r ca

ble

s

A [

mm

]

ØB

[m

m]

C [m

m]

G1

G2

91.01210,8 to 30 (with reverse current protection)

<55 <2,5> 100 at 500 V DC

M8x1 (4-pin)

any-10 to +50

max. 5according to EN 50081-1/50082-2

4520.501 20.502

33 30 37 M8x1 G1/8

z = Pressure- / Vacuum connection

Vacuum meter – connection at the rearWith red-green indication

ØA

G1

B

Product Description

> Examples of application: Visual vacuum monitoring in vacuum gripper systems

Technical Data Dimensions

Item no.

Display range overall [mbar]

Display range green [mbar]

Display range red [mbar]

Weight [g] ØA [mm] B [mm] G1

91.001 0 - -1000 -600 - -1000 0 - -600 45 40 41 G1/8

91.003 0 - -1000 -600 - -1000 0 - -600 90 63 49 G1/4

Page 78: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 076

Sheet metal handling | Valve technology3/2-way solenoid vacuum valves, pneumatically supported

3/2-way solenoid vacuum valves, pneumatically supported

36.210 36.515 - 36.525

Product Description

> Suction, blow-off, ventilation of vacuum cups > High suction power at small construction for short evacuation times and fast vacuum build-up > Pneumatic control for very short cycle times > Function: NC / NO as vacuum supply and blow-off/ventilation inlets can be exchanged > NO: Safe gripping of work-piece during power failure > Robust, yet lightweight housing- 36.210: aluminium anodised- 36.515 to 36.252: Robust and light-weight housing made from high resistant, fiber-glass reinforced Polyarylamide (IXEF®)

Ordering notes

> 36.210: included pilot valve for pneumatic control and coil / plug 24 VDC, power consumption 5 W > 36.515 to 36.525: included pilot valve for pneumatic controlCoil and plug are not included in delivery; please order: power consumption: 24 VDC: 5 W, 230 VAC: 5 VA

Technical Data

Item no.

Nominal width [mm]

Pressure range [bar]

Operating principle

Nominal flow rate [m³/h]

Control pressure [bar]

Closing time [ms]

Operating temperature [°C]

Weight [g] Suitable accessories

36.210 10 -0,99 - 0 NC 10 2,5 22 -5 - 50 360 --

36.515 15 -0,99 - 0 NO / NC 20 2,5 90 -5 - 50 390Solenoid coil 10.0052/24VDCPlug 10.006Solenoid coil 10.0058/230VAC

36.520 20 -0,99 - 0 NO / NC 40 2,5 90 -5 - 50 370Solenoid coil 10.0052/24VDCPlug 10.006Solenoid coil 10.0058/230VAC

36.525 25 -0,99 - 0 NO / NC 90 2,5 90 -5 - 50 500Solenoid coil 10.0052/24VDCPlug 10.006Solenoid coil 10.0058/230VAC

Wiring diagrams

1012

ac

b

NO: Normally open

Assignment:

a= P (Ventilation (Blow-off))

b= A (Product side)

c= R (Vacuum supply)

Assignment:

a= P (Vacuum supply)

b= A (Product side)

c= R (Ventilation (Blow-off))

1012

ac

b

NC: Normally closed

In this catalogue you will find a selection of

products for the sheet metal handling.

For our complete range of products and more

information see www.fipa.com.

Page 79: VentuzeCreated Date: 10/15/2013 4:43:17 PM

77www.fi pa.com

Sheet metal handling | Valve technology3/2-way solenoid vacuum valves, pneumatically supported

Pilot valve

To operate the valves, the setting screw must be nutral position

Wiring diagram how to combine vacuum valve with pneumatic control valve for blow-off

a

b

c12

a

b

c

a Vacuum supply

b Product side

c Ventilation (Blow-off)

a Compressed air in

b Compressed air out

c Use of silencer (e.g. 72.016): this connects valve to atmospheric pressure and enables release of product in case of failure of compressed air line

Application example: 3/2 way vacuum valves 36.520 with control valve 36.061

Dimensions

A I

C

B

H

d1

G1

G2

G3

G4

D

F

K

E

b a

c

Ø A

G4

E

F

d1

C

B

G1

G2

G3

ab

c

d

D

36.210 36.515 | 36.520 | 36.525

a = Vacuum supply / Ventilation (Blow-off) b = Product side c = Ventilation (Blow-off) / Vacuum supply d = Control pressure connection

Item no.

G1 G2 G3 G4 ØA [mm] A [mm] B [mm] C [mm] D [mm] d1 [mm] E [mm] F [mm] H [mm] I [mm] K [mm]

36.210 G3/8 G3/8 G3/8 G1/8 -- 50 83 137 40 4,5 33 32,8 22,5 35 44

36.515 G1/2 G1/2 G1/2 G1/8 75 -- 101 155 63 6,5 22,5 55 -- -- --

36.520 G3/4 G3/4 G3/4 G1/8 75 -- 101 155 63 6,5 22,5 55 -- -- --

36.525 G1 G1 G1 G1/8 92 -- 114,5 168,5 63 6,9 22 58 -- -- --

Page 80: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 078

Sheet metal handling | Valve technology3/2 way vacuum valve, pneumatically controlled with spring reset

3/2 way vacuum valve, pneumatically controlled with spring reset

Product Description

> Assembly of pneumatically controlled vacuum systems > Suction blow-off, ventilation of vacuum cups > High suction power at small construction for short evacuation time and fast vacuum build-up > Short response time > Function: NC or NO as vacuum supply and blow-off/ventilation inlets can be exchanged > Robust and lightweight housing- 36.810, 36.811: aluminium anodised- 36.815 to 36.825: high resistant, fiber-glass reinforced Polyarylamide (IXEF®)- 36.335 to 36.341: high resistant, fiber-glass reinforced Polyamide (GPR)

Ordering notes

> 36.335 to 36.341: electronic valve for switching control independet of compressed air supply available on request; ordering example for version with electronic valve: 36.335_24VDC, 36.341_230VAC etc.

Technical Data

Item no.

Pressure range [bar]

Operating principle

Nominal width [mm]

Suction power [m³/h]

Control pressure [bar]

Closing time [ms]

Operating temperature [°C]

Weight [g]

36.810 -0,99 - 0 NO 10 20 > 2 22 -5 - 50 360

36.811 -0,99 - 0 NC 10 20 > 2 22 -5 - 50 360

36.815 -0,99 - 0 NO / NC 15 34 > 2 90 -5 - 50 350

36.820 -0,99 - 0 NO / NC 20 53 > 2 90 -5 - 50 330

36.825 -0,99 - 0 NO / NC 25 88 > 2 90 -5 - 50 500

36.335 -0,99 - 0 NC 32 130 4 - 8 300 -5 - 50 470

36.336 -0,99 - 0 NO 32 130 4 - 8 300 -5 - 50 470

36.340 -0,99 - 0 NC 50 310 4 - 8 500 -5 - 50 990

36.341 -0,99 - 0 NO 50 310 4 - 8 500 -5 - 50 990

Wiring diagrams

ca

b

ac

b

12 10 12 10

NC: Normally closed NO: Normally open

Description of connections:

a= R (Compressed air, blow-off)

b= A (Product side)

c= P (Vacuum supply)

Description of connections:

a= R (Compressed air, blow-off)

b= A (Product side)

c= P (Vacuum supply)

Page 81: VentuzeCreated Date: 10/15/2013 4:43:17 PM

79www.fi pa.com

Sheet metal handling | Valve technology3/2 way vacuum valve, pneumatically controlled with spring reset

In this catalogue you will find a selection of

products for the sheet metal handling.

For our complete range of products and more

information see www.fipa.com.

Dimensions

B A

D

C

EH

F

G2

G1G1

G1

Ø d1

Ø A

D

B

C

G1

E

G1

F

Ø d1G1

G2

36.810 | 36.811 36.815 | 36.820 | 36.825

G2

G1

G1

B

G1

C

G3

E

Ø D

36.335 | 36.336 | 36.340 | 36.341

Item no.

G1 G2 G3 Ø A [mm] A [mm] B [mm] C [mm] D [mm] Ø D [mm] Ø d1 [mm]

E [mm] F [mm] H [mm]

36.810 G3/8 G1/8 -- -- 50 35 78 40 -- 4,25 21,5 32,75 22,5

36.811 G3/8 G1/8 -- -- 50 35 78 40 -- 4,25 21,5 32,75 22,5

36.815 G1/2 G1/8 -- 75 -- 75 101 63 -- 6,5 22,5 55 --

36.820 G3/4 G1/8 -- 75 -- 75 101 63 -- 6,5 22,5 55 --

36.825 G1 G1/8 -- 75 -- 75 101 63 -- 6,5 22,5 55 --

36.335 G1 1/4 G1/8 G1/8 -- -- 101 144 -- 60 -- 43 -- --

36.336 G1 1/4 G1/8 G1/8 -- -- 101 144 -- 60 -- 43 -- --

36.340 G2 G1/8 G3/8 -- -- 142 183,5 -- 90 -- 56 -- --

36.341 G2 G1/8 G3/8 -- -- 142 183,5 -- 90 -- 56 -- --

Page 82: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 080

Sheet metal handling | Vacuum filtersInline-filter

Inline filterUsed in connection with ejectors

E

A

d1

d1

C

d3

D

B

d2

Product Description

> To protect vacuum components (e.g. ejectors) from damage or excessive wear> Trapping impurities and liquids, which can be suctioned via the vacuum cup or other systems> Economical use due to replaceable filter cartridges

Technical Data Dimensions

Item no. Filt

er s

urf

ace

[cm

²]

Gra

de

of f

iltra

tion

m]

Wei

ght

[g]

Suit

able

ac

cess

orie

s

A [

mm

]

B [

mm

]

C [m

m]

D [

mm

]

d1 [

mm

]

d2 [

mm

]

d3 [

mm

]

E [m

m]

71.000 7,5 10 16Spare cartridge 71.005-Kartusche Spare holder VFUH2

55 18 29 33 4 18,5 4,5 10

71.001 7,5 10 17Spare cartridge 71.005-Kartusche Spare holder VFUH2

58 18 29 33 6 18,5 4,5 10

71.002 12,5 10 25Spare cartridge 71.006-Kartusche Spare holder VFUH3

66 20 35 39,5 6 22,5 4,5 14

71.003 12,5 10 27Spare cartridge 71.006-Kartusche Spare holder VFUH3

67,5 20 35 39,5 8 22,5 4,5 14

71.004 12,5 10 33Spare cartridge 71.006-Kartusche Spare holder VFUH3

75 20 35 39,5 10 22,5 4,5 14

Page 83: VentuzeCreated Date: 10/15/2013 4:43:17 PM

81www.fi pa.com

Sheet metal handling | Vacuum filtersPump filter / Pre-filter with paper cartridge

Pump filter / Pre-filter with paper cartridgeSuitable for dry areas

B

ØA

G1

G1

Product Description

> To protect vacuum pumps from damage or excessive wear> High filtration effeciency due to large filter surface> Robust metallic housing for long service life> Quick fastener for prompt checking or replacement of the filter cartridge

Technical Data Dimensions

Item no.

Max. volume flow [m³/h]

Grade of filtration [µm] Weight [Kg] Suitable spare cartridges

ØA [mm] B [mm] G1

FC 10F 10 5 0,36 FC 10F-Kartusche 72 79 G3/8

FC 20F 20 5 0,78 FC 20F/25F-Kartusche 96 93 G1/2

FC 25F 50 5 0,73 FC 20F/25F-Kartusche 96 93 G3/4

FC 30F 70 5 1,00 FC 30F/35F-Kartusche 120 105 G1

FC 35F 100 5 1,00 FC 30F/35F-Kartusche 120 96 G1 1/4

FC 40F 150 5 1,88 FC 40F-Kartusche 160 161 G1 1/4

FC 50F 200 5 2,19 FC 50F-Kartusche 160 197 G1 1/2

FC 60F 300 5 4,66 FC 60F-Kartusche 185 258 G2

Pump filter / pre-filter with paper cartridgeSuitable for dry areas

C

G1

G1

Ø B

A

Product Description

> To protect vacuum pumps from damage or excessive wear> High filtration efficiency due to large filter surface> Light-weight plastic housing> Inspection glass to monitor the filtration effect> Examples of use: graphics, textile and pharmaceutical industries

Technical Data Dimensions

Item no.

Max. volume flow [m³/h]

Grade of filtration [µm]

Weight [g] Suitable spare cartridges A [mm] ØB [mm] C [mm] G1

71.032 12 7 180 71.032-Kartusche 62 62 82 G1/4

71.033 24 7 370 71.033-Kartusche 85 85 138 G3/8

71.034 30 7 360 71.033-Kartusche 85 85 138 G1/2

71.043 100 7 900 71.043-Kartusche 145 145 240 G1

Page 84: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 082

Sheet metal handling | Notes

Notes:

Page 85: VentuzeCreated Date: 10/15/2013 4:43:17 PM

83www.fi pa.com

Your enquiry | Fax form

Could it be something else?Would you like to have more information from FIPA?

Just ask for it here and now or else at www.fi pa.com.

Brochures

FIPA Vacuum Cups

FIPA Vacuum Components

FIPA End-of-Arm-Tooling

For up-to-date and concise information regarding the company, service offers and FIPA dealers in your neighborhood

please visit www.fi pa.com.

FIPA News is available for all those interested in the company FIPA, its products and services and the current

developments and latest innovations in the fi elds of vacuum technology and End-of-Arm-Tooling.

Keep yourself updated and subscribe to the newsletter via e-mail using this fax form or by registering

at www.fi pa.com.

Please send me the FIPA newsletter to the e-mail address given below.

My contact details:

Company

Given name | Surname

Street Postal code | City

Telephone Telefax

E-mail

Item number Description Quantity

Simply copy the form, fi ll it out and send it by fax to +49(0)89 / 96 24 89 – 11.

Please send me an offer for:

Remarks

Online-Formular and

Downloads: www.fi pa.com

Page 86: VentuzeCreated Date: 10/15/2013 4:43:17 PM

Phone +49 (0)89 / 96 24 89 – 084

Questionnaire F 100 | Vacuum technology

Please also avail yourself of the services

of our consultation hotline:

+ 49 (0) 89 - 962489-0

FIPA GmbHFreisinger Str. 3085737 Ismaning

Fax +49 (0)89 - 96 24 89 - 11info@fi pa.com

From:

Company

Given name / Surname

Street

Postal code / City

Phone/Fax

Please answer the following questions carefully so we can select the vacuum unit best suited for your purpose.

Please quote for the following application:

.............................................................................................................................................................................................................

1.

2. What kind of parts are you handling?

..............................................................................................................................................................................................................

To:

3. The objects are: 4. Dimensions/Weight: 5. Lifting direction: 6. Surface: 7. Temperature:

round

oval

square

rectangular

curved

unstable

Length ................. mm

Width .................. mm

Height

............................. mm

Ø .......................... mm

Weight .............. g/kg

Material:

.................................

smooth

rough

textured

ripples

oily

scaled

wet

dry

porous

8.

9. Vacuum generation:

Vacuum pump Vacuum ejector existing not existing

Duty cycle ....................................................

Distance .......................................................

Suck-in time .................................................

Positioning accuracy ....................................

Acceleration .................................................

Environment .................................................

Vacuum cups

10.

11.

12.

13.

14.

15.16. In use?

no yes, following type ....................................................

17. Annual requirement: approx. .................................................... pieces

Power capacity ......................................................................................

3a.

Use:

indoor

outdoor

briefl y

................. °C

continously

+ .................. °C

- .................. °C

Page 87: VentuzeCreated Date: 10/15/2013 4:43:17 PM

FIPA | Where you need us anywhere in the world

Imprint

Our General Terms and Conditions apply; they can be viewed at our website www.fi pa.com or

requested by calling +49 (0)89 / 96 24 89 - 0.

Copyrights

All pages and their contents are copyright protected (all rights reserved). All names, trademarks,

logos, text and images are the property of the respective owners and must be treated as such.

Exclusion of liability

This catalogue was compiled with the greatest possible care. Nevertheless, FIPA provides no warranty

that the information contained herein will be accurate and free of errors. FIPA rules out any liability for

damages that result directly or indirectly from the use of the FIPA catalogue to the extent that these

damages were not caused by premeditation or gross negligence on behalf of FIPA.

FIPA shall not be held liable for any damage resulting from ready-made modules preassembled by

FIPA if a check as to their suitability for the particular application has not been made prior to them

being put into operation by the customer.

Created in October 2013

FIPA GmbH

Freisinger Straße 30

85737 Ismaning / Germany

Phone +49 (0)89 / 96 24 89 - 0

Fax +49 (0)89 / 96 24 89 - 11

info@fi pa.com

www.fi pa.com

Executive Management: Rainer Mehrer

Company headquarters: Ismaning / Germany

Commercial register: Munich, HRB 104 684

Sales tax ID No.: DE161864784

Germany

Spain

Switzerland

Portugal

Netherlands

Denmark

France

Sweden

Turkey

Poland

Romania

Italy

Israel

Hungary

The Czech Republic

Japan

Ireland

Norway

Great Britain

USA

New Zealand

Australia

Iran

Finland

South America

Canada

MexicoIndia

Thailand

Page 88: VentuzeCreated Date: 10/15/2013 4:43:17 PM

www.vacuumcups24.comwww.vacuumcomponents24.com

www.grippers24.com

> Sie Do you have a technical question about our products?> Do you request a quote?> Or are you interested in CAD data or datasheets of our products?

You will get what you need quickly by calling us at+49 (0) 89/962489-0. by sending us an e-mailat info@fi pa.com! or just by visiting ourwebsite www.fi pa.com.

Contact informationfor your smartphone

Ms. Betina Wanner, Offi ce Management

FIPA GmbH

Vacuum Technology | End-of-Arm-Tooling

Freisinger Straße 30

85737 Ismaning / Germany

Phone +49 (0) 89 / 962489 – 0

Fax +49 (0) 89 / 962489 – 11

info@fi pa.com

www.fi pa.com

FIPA worldwide

FIPA Inc.

Vacuum Technology | End-of-Arm-Tooling

1855 Evans Road

Cary, NC 27513 / USA

Phone 1 (919) 651-9888

Fax 1 (919) 573-0871

sales.us@fi pa.com

www.fi pa.com

Stay up-to -date on everything relatedto material fl ow with the free FIPAnewsletter. Subscribe now at www.fi pa.com!