Technical Specifications for the electrical electrocution device for persons remote control for the Directorate General for Security Patrols

Item number

Item title Technical specification Quantity Unit price

Total price

1 Electrical electrocutio

n device packages

for persons remote control

1. The external jacket provides protection against sharp and edged machines and all kinds of light weapons such as ( all types of pistols , half machine guns 19 mm from a distance of 5-25 meters provided that the hollowness should not exceed 1 cm after shooting .

2. The level of protection of the jacket should not be less than 3a3. Weight as shown in accordance with the attached drawing is 100% of

preference to the lesser weight and higher resistance 4. The external protective jacket is made of cafalar substance or any material

that have the same properties without adding any other materials inside this material .

5. The jacket consists of chest , back with a cover for both sides and protector for lower abdomen and protector for the neck that can be removed by an adhesive tape and front and rear pocket size 30x25 cm

6. The jacket is easily worn and flexible and does not hinder rapid movement and is opened from both sides and shoulders and it can be readjusted by the adhesive tape.

7. The external cover of the jacket is made of heat resistant nylon ( fire ) water, steam , chemicals and it provides the quality of internal cooling of the body , the internal lining is enclosed with water proof material .

8. The quantities of the jacket are supplied in xxl – xl – l sizes in accordance with the sizes shown in the table

9. The word “ front “ should be written on the internal lining to know the direction of resistance when removing the sheath .

10. The warranty should not be less than 60 months in case of use or storage effective from the date of supply .

11. A certificate of compatibility with specifications should be attached ( NIJ_ STD) American or equivalent from the reliable international specifications and to be attested by the competent authorities in the country of origin

10,950

1

showing the kinds of materials used in the manufacturing of the jacket.12. Non – returnable sample of the jacket should be forwarded with the tender (

xl size ) black color to conduct experiments without any financial obligation on the Public Security .

13. The required logo should be printed thermally and fixed on the back with adhesive base as shown in the special conditions .

14. When supplying the quantities the date of manufacture should be written in addition to the name of the manufacturing company , country of manufacturing , duration of validity on all quantities supplied in clear hand writing from inside provided that the date of manufacture should not exceed six months from the date of supply .

15. Additional quantities should be brought with the supplied quantity ( in accordance with numbers shown in the table ) to conduct experiments, investigations and inspection without any financial obligation on the Public Security

16. Each jacket that is supplied in a light suit case light weight made of cotton and nylon or any other similar material.

17. Each 10 jackets of the contracted quantity should be put inside a strong box made of wood or any other material that have the same solidity

2

3

Size L XL XXLFROM UPPER SHOULDER TO THE LOWER ABDOMEN 55 60 65

FROM SCAPULA TO LOWER ABDOMEN 40 40

45

CHEST AREA 30 30 35

ABDOMEN AREA 50 55 60

WEIGHT 2.800 3.400 3.900

Quantity 2000 4950 4000

The number of samples 6 15 12

Technical specifications of the board that protects against bullets for the regional police departments – security patrols – diplomatic security

Item number

Item title Technical specification Quantity Unit price

Total price

2 Board for the protection

against bullets

1. The board is anti to all kinds of light weapons and incendiary and penetrating bullets 7.62 x 39.7 mm ( half machine gun with all types and guns caliber 7.62 x 51 mm nano from a distance of 5-25 meters including the ends provided that the cavity should not exceed the cavity after shooting ( 1) cm preference is given to the lighter weight and more resistant .

2. The level should not be less than the fourth level.3. The size of the resistant material (30x25x2 cm with two

faces in the form of beveled oblong provided that it can be easily put in the pocket of the protective jacket that protects against bullets in accordance with the attached drawing .

4. The protective board is able to absorb the strength of the shock that minimizes the effect of the injuries resulting from the acceleration of the bumping shot .

5. The weight should not exceed two kilos only ( + 5%( 6. The warranty period should not be less than 60 months in

case of use or storage starting from the date of supply .7. Testing certificate from one of the reliable international

laboratories should be attached and attested by the competent authorities in the country of origin .

8. A sample of the board that protects against bullets should be submitted with the tender for conducting experiments

10,950

4

such sample shall not be returned after performing experiments on them without any financial obligation .

9. The contracted quantities shall be supplied inside a strong box made of wood or any other material with the same solidity for each 10 boards , the sample should be submitted when the contract is awarded for approval .

10.In case the tended is awarded the date of manufacture should be written in addition to the name of the manufacturer , manufacturing country , validity period in clear handwriting

11.The date of manufacturing should not exceed six months from the date of supply .

12. (24) additional samples of the board should be brought with the supplied quantity for conducting experiments , investigations and inspection without any financial obligation on the Public Security .

5

Length

Width

Thickness

30 cm

25 cm 2 cm

Technical specifications of the helmet that provides protection against bullets required to be supplied for regional police departments Security patrol – diplomatic security special troops

Item number

Item title Technical specification Quantity Unit price

Total price

3 Helmet that protects the face against

bullets

1. Helmet surrounding the whole head and behind the neck and ears for protecting the head and neck against light fire bullets

2. The helmets protects against bullets from 5-25 meters distance provided that the cavity should not exceed 1 cm after shooting

3. The weight should not exceed 1.5 kg for l size and preference should be given to the type that is more resistant and lighter in weight

4. The helmet is equipped with collar to fix the helmet on the head with the lower chin so than the helmet should not be removed during rapid movement during raids and to be properly fixed in the helmet

5. The helmet should not be fixed directly on the head , yet there are internal cushions to minimize the effect of shocks in the head.

6. External sounds are heard with the possibility of installing wireless communication systems

7. A certificate for compliance with NIJ_ STD American standards or equivalent from international reliable specifications and to be attested by the competent authorities in the country of origin

8. Black color and the required logo should be printed thermally as shown in the special conditions

5,581

6

9. Non returned sample should be submitted with tender large size black color to conduct experiments on them without financial obligations on the Public Security

10. In case the tended is awarded the date of manufacture should be written in addition to the name of the manufacturer , manufacturing country , validity period in clear handwriting

11. Quantities should be supplied in xxl – xl – l sizes as shown in the table below .

12. Additional samples should be brought with the supplied quantity for conducting experiments and investigations and inspection without any financial

13. obligations on the Public Security as shown in the following table Size l Xl XXl

Weight Not more than 1500

Not more than 1700

Not more than 1900

Quantity 1395 2791 1395

Number of samples 3 7

3

14. each helmet that is supplied should be put in a light weight suit case made of cotton and nylon or any similar material

15. each 10 helmets of the contracted quantities should be put inside strong box made of wood or any other material with the same solidity .

7

Technical specifications for electrical sticks required for ( regional police departments – roads security special troops – diplomatic security special troops – security patrolling police )

Item number

Item title Technical specification Quantity Unit price

Total price

4 1. The electrical sticks are made of steel covered with Caoutchouc resistant to heat and shocks or any material that has the same properties .

2. The handle is fitted with polyster or leather suspender or any material that has the same properties .

3. The head is fitted with two electrical poles ( negative/ positive).

4. The intensity of electrocution should not be less than ( 500 kv) and that should be explained in the catalogue .

5. The electrical sticks operate with all types of dry batteries available in the local markets with standby batteries .

6. It is preferred that the electrical sticks to be European or American made .

7. The length of the electrical sticks should not be more than

8. A health certificate with Arabic translation should be attached and to be attested by the manufacturing company ( country of origin ) confirming that the electrical sticks do not have any

600

8

health bad effects9. The electrical sticks should be of black color and the

required logo should be printed by thermal printing as shown in the special conditions

10. Stocking made of Nylon or flax to be installed in the middle for carrying the stick

11.A sample of the electrical sticks should be brought for conducting experiments on them

12.The date of the manufacturing year should not exceed six months from the date of supply .

Technical specifications for steel handcuffs required for regional police departments – roads security – diplomatic security – security patrol police)

Item number

Item title Technical specification Quantity Unit price

Total price

5 1. The handcuff is made of polished steel metal of high level of solidity .

2. The handcuffs are electronically coated with nickel that cannot be removed due to use.

3. The size of the handcuffs should not be less than ( 5x7 cm )

4. The handcuffs should be light weigh not more than (400 ) grams.

5. The handcuffs are operated with double lock and preference shall be given to multiple security

600

9

benefits. 6. The collar of the handcuffs is equipped with thick

and strong teeth that are not subject to corrosion and rust.

7. The group of locks is good, flexible and is not affected by weather conditions.

8. The handcuffs is resistant to pulling by hands 9. The handcuffs are equipped with two steel keys

( stainless steel MIM) dust proof 10.The vault is galvanized from inside and smooth11.The two handcuffs are connected with a chain with

length not more than 4 cm and fixed on the body of the handcuffs with mobile rotating ring ( not fixed ) and to weld the heads of the rings

12.Strong and durable manufacturing (European or American) compatible with ( ALL NILEC AND NIJ ) specifications and a certificate of compliance translated into Arabic should be attached .

13.A sample of handcuffs should be brought with the tender provided that it will not be returned after experimentation .

10

Technical specifications for the feet fetters required for ( regional police departments – roads security special troops Item

numberItem title Technical specification Quantity Unit

priceTotal price

6

1. The feet fetters Are made of polished steel Of high solidity .2. The feet fetters are electronically Plated with nickel material that

Cannot be removed due to use. 3. The size of feet fetters should Not be less than ( 7x10cm) 4. The feet fetters should be Of light weight not more than 700

grams 5. The feet fetters are operated by Double lock with the possibility

Of controlling the size of the Collar by pushing it by feet Without the need to go down to The level of the foot of the Fettered detainee.

6. The collar is teethed with thick And strong tooth that are not Subject to corrosion and rust.

7. the group of locks is good Strong and not subject to Corrosion and rust.

8. resistant to hands and feet Pushing9. Equipped with two steel keys ( stainless steel MIM) solid and Rust

proof 10. The vault is galvanized from Inside and soft 11. The fetters are connected with A chain with length not more12. Than 30 cm and fixed on the Body of the fetter with Mobile

rotating ring ( not fixed)With welding the heads of the Rings 13. durable industry (European or American ) compatible with (ALL

NILEC AND NIJ)Specifications and a certificate Of compliance translated into Arabic should be attached

14. A sample of the feet fetters Should be brought with the Tender and it will not be Returned after conducting Experiments on them.

9000

11

Technical spcifications for disposable handcuffs required for ( roads security – diplomatic security – security patrolling ) Item

numberItem title Technical specification Quantity Unit

priceTotal price

7

1. The disposable handcuffs are used for handcuffing the detainees .

2. The disposable handcuffs are easy to use.3. The detainee cannot get rid of disposable handcuffs

quite easily. 4. The disposable handcuffs are made of flexible and

soft woven yarns that do not affect the hands after use.

5. There is handcuffs cutter for each 100 pieces of handcuffs.

6. 10 pieces of handcuffs should be brought with a cutter as a sample packed into tightly closed box .

7. The disposable handcuffs are supplied after awarding the tender in packages with capacity of 100 pieces with cutter.

8. The date of manufacture should not exceed six months from the date of supply.

.

600

12

Technical specifications for the night telescope required to be supplied for regional police departments – special troops of roads security – special troops for diplomatic security )

Item number

Item title Technical specification Quantity Unit price

Total price

8 1. The night telescope is easy to use by hand and to be fixed on the head without helmet ( in the head installation unit) .

2. The night telescope is used during night times and it enables the vision of objects in the opened and closed places.

3. The night telescope operates with infrared rays ( ultraviolet )

4. The night telescope is anti-vibration and can be used during driving of cars or during the tactical raid operations.

5. Automatic adjustment for the level of brightness 6. The zooming power from 1 and above and the

diameter of the eye lens should not be less than 25 mm.

7. The field of vision should not be less than 40 degrees

8. The vision is through both eyes.9. The range of vision from 25 -00 meter with the

possibility of correcting the vision defects.10.The size is small not more than ( 160x150x75)mm.11.Accuracy ( -6 to +5 Diapter

600

13

12.Factory warranty for two years.13.The night telescope is anti-shocks , waterproof ,

dust proof ( military) and the heat reaches 50 degrees upon use and storage

14.Power source ( it operates with all types of dry batteries available in the local markets)

15.Certificate of compliance with European or American standards should be submitted.

16.The night telescope is light weight not more than ( 500 ) grams

17.A health certificate should be brought confirming that the night telescope has not harmful effects on the eye , such certificate should be attested from the country of origin and translated into Arabic language.

18.Accessories : ( suit case- operation and maintenance manual in Arabic language – lens cleaning paper- three kits of batteries )

19.The color is black and the required logo should be printed with thermal printing as shown in the special conditions .

20.The company shall be committed to present an offer regarding the method of use and storage without any financial or moral obligation on the Public Security.

14

Technical specifications of the day telescopes required to be supplied for regional police departments – road security special troops – diplomatic security special troops .

Item number

Item title Technical specification Quantity Unit price

Total price

9 day telescopes

1. The day telescopes shall be sued during the day and it operates with the same quality in the shades places ,, sunrise and sun

2. The day telescope approaches the remote objects from a distance not less than 1000 meters and vice versa with the possibility of adjusting the distances of vision .

3. Zooming force should not be less that ( 8x20x50) with perfect accuracy .

4. The lenses should be completely covered provided that they should give an image distinguished with clarity and high contrast

5. The diameter of the eye lens should not be less than 45 mm.

6. Water proof and dust proof and easy to use.7. Medium size and manually used.8. Lightweight not more than 1500 grams. 9. Accuracy (+- 5) dieter10.Accessories ( suit case- operation and maintenance

manual in Arabic language – lens cleaning paper(

400

15

11.Easy to use , strong and shock resistant. 12.A sample should be submitted with the tender . .

Technical specifications for the long manual search light required for the diplomatic security special troops.Item

numberItem title Technical specification Quantity Unit

priceTotal price

10 Long manual search light

1. Technical specifications The long manual search light is made of aluminum or polycarbonate material or any material with the same quality .

2. The handle is equipped with the non- sliding characteristics 3. Led lamp.4. The lens is made of glass that is not subject to scratch . 5. The long manual search light is operated by dry batteries available

in the local markets. 6. On and off switch . 7. The long manual search light should not be more than 40cm long

and not less than 30 cm 8. The long manual search light should be resistant to rust , vibration

and water.9. The strength of the long manual search light should not be less

than 200 lumen.10. The long manual search light should be supplied with standby

battery kit ( additional ).11. A warrant should be submitted by the factory for one year and to

provide spare parts for 10 years. 12. The color should be black and the required logo should be printed

thermally as shown in the special conditions. 13. All 10 pieces should be packed in a durable and strong box.14. A sample of the long manual search light should be brought and it

will not be returned back .

764

16

Light reflecting jacket required for the police departments in the regions – directorate general of security patrolling police Item

numberItem title Technical specification Quantity Unit

priceTotal price

11 Light reflective

jacket

1. Black color - vision reflective – it helps to seen those who wear it in case there is no vision as shown in the side figure

2. Excellent manufacture from textile that suits the climatic conditions of the Kingdom provided that it should not cause any heat for those wearing it .

3. The jacket should be bored to allow for the entrance of air with exception of areas covered with reflecting color.

4. The jacket should be closed with adhesive tape.5. The jacket should be light weight not more than 100

grams .6. The jacket should be easy to wear ,manufactured in

accordance with international standards as regards the safety of the traffic policemen on the road.

7. The size of the jacket should be ( 65x 60 cm) with a pocket from the front with zipper 27 cm long and 24 cm width.

8. The type of the cloth is bored with distinctive degree of reflective clarity.

9. The jacket should have an adhesive tape from sides for zoom in and zoom out.

10. The required logo should be printed as shown in the

8575

17

special conditions with 16 cm diameter with an adhesive tape installed on it from front and back and on both shoulders

11. Each 100 pieces should packed in a durable and strong box.

12. A sample compatible with the available sample should be submitted .

18

Technical specifications ( for the tactical jacket ) ( jacket without sleeves ) required to be supplied for the diplomatic security special troops .

Item number

Item title Technical specification Quantity Unit price

Total price

13 Tactical jacket black

color

1. The tactical jacket should be worn over the military uniform in the form of a jacket ( jacket without sleeves ) used for carrying equipment .

2. the tactical jacket is closed with high quality zipper.3. The tactical jacket is made of 100 % polyester material with bores

to allow for the entry of air or from any material with the same qualities .

4. The tactical jacket is equipped with front and rear pockets for carrying equipment and military equipment .

5. The lengths of the tactical jacket should not be less than ( 50 cm x 55 cm ) for l size .

6. The tactical jacket should be lightweight not more than ( 300 grams).

7. The tactical jacket should be flexible and not subject to cracking and easy to be worn .

8. The tactical jacket does not hinder the rapid movement . 9. The quantities of the tactical jacket should be supplied with 75 for

the size l and 150 for xl size and 75 for xxl size .10. The color should be compatible with the color camouflaged for

the special troops of diplomatic security. 11. The logo of the special troops of the diplomatic security should be

printed from inside thermally . 12. A large size sample should be brought and it will not be returned

after the tender is submitted. 13. Each 50 pieces should be packed in a durable and strong box.

300

19

Technical specifications ( cyclones glasses) required to be supplied for the diplomatic security special forces

Item number

Item title Technical specification Quantity Unit price

Total price

15 Cyclones glasses

1. Made of a material that is not affected by weather conditions and unbreakable

2. The cyclone glasses are used in all kinds of weather ( wind + rain + sand storms ) .

3. The cyclones glasses are tightly closes for the eyes area from all sides . 4- the cyclones glasses provide protection against protection dust that is scattering and hanging in the air .

4. 5 – the cyclone glasses provide protection against harmful radiation .

5. Cyclone glasses can worn over the ordinary glasses for seeing .

6. The cyclone glasses are supplied in multi colored lenses and it should be easy to dismantle and install.

7. The cyclone glasses are easy to use .8. The size of the cyclone glasses can be adjusted on

the required size( free size ) 9. A sample of the cyclone glasses should be brought

and it will not be returned after tender.

300

20

Technical specifications for ( small search light ) required to be supplied for diplomatic security special troops

Item number

Item title Technical specification Quantity Unit price

Total price

16 Cyclones glasses

1. The small search light is made of Aluminum or poly carbonate material or any material with the same qualities .

2. The handle is fitted with non- slipping quality 3. LED lamp .4. The lenses is made of scratch proof glass 5. It is operated by dry batteries6. On and off switch .7. It should not be more than 20 cm long and not less

15 cm long .8. It should be resistant to rust , vibration and water 9. The Power at least 180 Lumen 10. Carries on the middle range11. Black color with thermal logo printing (Special

forces diplomatic security).12. Provides two batteries backup .13. Each 10 pieces should be packed in a durable and

strong box.14. Should bring A sample.

150

21

Technical specifications for the rain protective coat required to be supplied for diplomatic security special troops

Item number

Item title Technical specification Quantity Unit price

Total price

18 protective against rain

1. the coat is used for protection against rain and it is worn in the form of suit with sleeves and head cover .

2. The coat is made of polyester material 100% or from any material with the same qualities .

3. Light weight 4. Flexible and not subject to rupture 5. Fitted with tape that reflects light – white color one

tape around the body and on tape on the sleeves with width not less than 6 cm as in the side figure

6. a sample with xl size should be brought that is not returned and too large.

7. required sizesDimension l Xl

Length 150 160Width 140 150

8. it is camouflaged with the color of the diplomatic security and the logo of diplomatic security should be printed

9. each 100 pieces should be packed in a durable and strong box 10. The date of the year of manufacture should be printed

1000

22

Technical specifications ( for elbow protector ) required to be supplied for diplomatic security special troops

Item number

Item title Technical specification Quantity Unit price

Total price

21 Elbow protector

1. Pair of elbow protector X- shaped distinguished covering the whole part of the elbow as shown in the side drawing

2. Fitted with protector made of Yoruthan plastic material thermally treated and lined with sponge high density.

3. The device is capable to absorb shocks and anti- sharp machines and sticks during riots

4. The device is easy to wear and it is convent to wear 5. The device is fitted with spandex belts with clips for

quick opening, ring and hook for closure. 6. Black color 7. The need to bring a sample .

500

23

Technical specifications ( knee support ) required to be supplied for the diplomatic security special troops

Item number

Item title Technical specification Quantity Unit price

Total price

22 Knee protector

1. The knee protector should be distinguished X – shaped as shown in the side illustration.

2. pair of knee covering the whole front part of the knee.

3. the device should be provided with a protector made of Yorothan plastic material thermally treated and lines with sponge ( Eva ) high density.

4. the device is capable to absorb shocks and it anti- sharp machines and sticks during riots events .

5. the device is equipped with Spandex belts with clips for quick opening , ring and hook for closure .

6. it is easy to recoil the device which is convenient when wearing it .

7. black color 8. a sample should be brought .

500

24

Technical specifications for the Pepper Resin Atomizer required for the Directorate General of Security Patrol Item

numberItem title Technical specification Quantity Unit

priceTotal price

41

1- The pepper resin atomizer is used to control persons horizontally and vertically in all directions.

2- The atomizer package is filled with pepper resin either ( Organic OC) , or artificial ( PAVA)

3- The effective material is released in the form of directed oil drizzles that reach a distance not less than 5 meters.

4- The capacity of single package should not be less than 50 mm and it should be tightly closed to prevent leakage.

5- The pepper resin atomizer is equipped with safety lock.6- The pepper resin atomizer has no effect on the heath of

the human being. 7- It is carried in the middle range 8- A certificate from one of the global laboratories should

be attached to confirm compliance with global health standards.

9- The pepper resin atomizer is supplied with stocking with black color made of Cordora or any durable similar material

10- A sample should be brought for experimentation provided that it will not be returned without any financial obligation on the Public Security.

10,000

25

Technical Specifications for the electrical electrocution device for persons remote control for the Directorate General for Security Patrols

Item number

Item title Technical specification Quantity Unit price

Total price

Continuation of item number( 42- A)

Electrical electrocution

device packages

for persons remote control

1. Explosives fitted with two heads attached with wires for conducting electrical signal immediately upon touching the body.

2. The explosives give an electrocution force not more than ( 500000 volts (KV)

3. The electrical electrocution device is operated in accordance with affecting the sensory and motor nerves

4. The affecting distance should not be less than (18) feet.

5. The electrical electrocution device can be used by launching the projectile or through contact

6. 6 – the electrical electrocution devices should be manufactured by European or American manufacturers

7. certificate should be obtained from one of the global laboratories confirming that the electrical electrocution device has no health bad effects

8. Ten (10) packages should be brought as a sample and to give consent for performing experiments on the packages.

600

26