-formz tips techniques · formz tips & techniques 4 [7] copy and paste (on active layer)...
TRANSCRIPT
formZ tips & techniques �1
[1] Project Settings: Working UnitsMedium (Building)
formZ tips & techniques �2
[2] Project Settings: AppearanceformZ classic: white background
[3] Project Settings: Layershighlght picked checkmarked
[4] Project Settings: Objectshighlght picked checkmarked
formZ tips & techniques �3
[5] Project Settings: Project FilesKeep Backup checkmarked
[6] From Palettes choose Snap options; check mark Snap to Ghost
formZ tips & techniques �4
[7] Copy and Paste (on Active Layer) existing figures to new layers.
[8] “Pop” the surfaces into solids using the Derive / Extrusion tool.
formZ tips & techniques �5
[9] Devise a layer height system. Heights can be 1ft, 2ft, 4ft, 8t, etc. The height for the overall relief is limited to a maximum of 15 foot height.
[10] Every traced element must be a surface (a closed shape) in order to extrude it into a solid.
formZ tips & techniques �6
[11] Lines can be made into surfaces using Derive / 2d Wall
[12] Lines can be made into vertical surfaces using Derive / Extrusion tool
formZ tips & techniques �7
[13] Use V-Line or Rectangle to trace surfaces over Orthogonal schema.