- high quality - - high loading capacity - - worldwide ... made in germany ! ," , - high...

www.saenger-rollenlager.com

Made in Germany !

- High loading capacity -- Low installation height -

- Dimensional adaptability -

- High quality -- Worldwide approved -

Sänger Rollenlager

GmbH & Co. KG

35645 Waldsolms - Germany -

Postbox 41

Phone: (0049) 6085 98 13 0

Fax: (0049) 6085 98 13 50

[email protected]

www.bergab.ru Берг АБ [email protected] Тел.(495)-228-06-21,факс (495) 223-3071


ROW / S

ROH / S

ROW / Wa

ROH / Wa

ROH / W9

Type Rollers Cage Application areasmax.

rotation speed

ROW / S

self-hardened rollers sup-ported at both ends by a journal guide in fl at steel rings with enough play Flat steel rings fastened toge-

ther permanently by rivetted pins

For light or medium loa-ding applications

ca. 800 r.p.m

ROH / S hardened and by request ground rollers.

For heavy loading applica-tions and a rotation speed

> 800 r.p.m.ca. 2000 r.p.m

ROW / Wa

self-hardened, ground or polished steel rollers held

at both ends in milled roller pockets

Milled brass rings fi rmly fa-stened to one another by rivet pins serve as side holders for

the rollers

For heavy and intermittent loading applications (most-ly for engine and apparatus

construction)

ca. 800 r.p.m

ROH / Wahardened and ground preci-sion rollers held at both ends

in milled roller pocketsca. 2000 r.p.m

ROH / W9

hardened and ground precisi-on rollers held in completely

milled, cylindrical roller pockets

Completely closed brass cage with a riveted ring at one end

For extreme heavy loading application – It can also take up axial load to a

slight extent

ca. 2500 r.p.m

Scope of supply: • All types can be offered in nearly every metric and inch dimension • Special tolerances on request • Special materials on request ( for example high temperature steel or special rust and acid steel) • Roller Bearings according to DIN 5402 / Roller Bearings Assemblies on request • Roller Bearings type “Baltzer” on request • Split Roller Bearings on request

Installation tolerance: d = ISA f7 D = ISA F7



ROW / K

ROH / K

RON / K

ROW / P

ROH / P

RON / P

ROK / K

Type Rollers Cage Application areasmax.

rotation speed

ROW / KSelf-hardened rollers supported

over the entire length by the pockets and surrounded by the

polyamide cage

Polyamide cage with a pre-cision axial roller guidance, extremely quite, extremely

high resistance to distortion, high cage abrasion resistance and resistance to chemicals

For light or medium loa-ding applications

ca. 800 r.p.m

ROH / K Hardened and by request ground rollers

For upper loading applica-tions and a rotation speed

> 800 r.p.mca. 2000 r.p.m

RON / K Rollers from rust and acid resistant steel For light or medium loa-

ding applications, where steel is not applicable.

ca. 800 r.p.m

ROK / K Rollers from polyamide ca. 800 r.p.m

ROW / PSelf- hardened rollers held at both ends in cylindrical roller

pockets Side rings from polyamide permanently connceted with one another by steel pins of

the required length

like ROW / K ca. 800 r.p.m

ROH / P Hardened and by request ground rollers

like ROH / K ca. 2000 r.p.m

RON / P Rollers from rust and acid resistant steel

like RON / K ca. 800 r.p.m

Scope of supply: • All types are available in nearly all current dimensions •Special dimensions on request, depending on quantity •Availability of a special cage for extreme stability

* max. Temperature 80° C

Ordering information: Designation of type – Outer diameter (OD) – Inner diameter (Id) – Length ( l ) – Roller diameter ( dr )



Sänger Rollenlager

GmbH & Co. KG

35645 Waldsolms - Germany -

Postbox 41

Phone: (0049) 6085 98 13 0

Fax: (0049) 6085 98 13 50

[email protected]

More products from Sänger Rollenlager:

Sled Roller Bearings Roller Bearing Assemblies Roller Bearing

according DIN 5402

Housing Assemblies RAL

Solid Precision Sleeves Spacer sleeve Synthetic Parts

Split Sleeves


- high quality - - high loading capacity - - worldwide ... made in germany ! ," , - high...

Documents