38499502048

wt 'dffil lryOne- Button Remote Transmitter Programming Instructions

This Remote comes from the factory designed to operlte onyGenie@ lntellicadeo type garoge door opener.

A. For use with leorn Cade Button equipped Opefiets {teel to present) -0l{ BEldOlE > 1 . Remove the battery's protective film by pulling it out the bottom of the remote.

0l{ P0WE*iIEI0 > 2. Locate the Learn Code Button and Learn Code lndicator LED on your opener's

I powerhead (FlG. 1A) (See owner's manual).I

V 3. Press and release the Learn Code Button-the Red Learn Code LED will blink rapidly.

0l'JREM0IE> 4. Press and release the Remote Button, (FlG.2)-the Learn Code LED will stay on

I luops blinking)

I t. Press and release the Remote Button again-the Learn Code LED will turn off.

Y 6. Press and release the Remote Button again-the Door Opener will run.

THE REMOTE IS NOW PROGRAMMED.

Repeat as rrecessary for additional remotes.

B. tor use with P rag ro m / Set B utto n e quipped Open ers (20 t 0 to p rcs ent)-

O/llREfi0IE> 1. Remove the battery's proteciive film by pulling it out the bottom of the remote.

0r{P0WgfiHEID > 2. Locate the Program/Set Button and Programming lndicator LEDs on your opener's

I powerhead (FlG. I B) (See ownert manual).I

I 3. Press the Program/Set button until the round LED will turn blue.

V 4. ReleasetheProgram/Setbutton-thelongLEDwillblinkpwple.

0lllBIMoIE>5. PressandreleasetheRemoteButton,(FlG.Z)-thelongLEDwill turnstea*puple

I tr,ops blinking).I

I O. Press and release the Remote Button again-both LEDs will blink blue and turn off.

* 7. Press and release the remote button again-the Door Opener will run.

THE REMOTE IS NOW PROGRAMMED.

Repeat as necessary for additional remotes.

C. Replacing the Battery.(Programming is not affected by battery replacement.)

1. Slide the Battery Cover off the front of the remote (FlG. 2).

2. Slide the old battery toward the bottom of the remote and out.

3. Properly discard the old battery.

4. Slide a new (CR 2032 size) battery into position and slide the Cover back on.

POWER HEADS (for various models)Circle shaws location of Learn Cade Button and LED orProgram/Set button ond LEDs as appropriote.

fr6. rl-mafirg coog Surofrr

,Ns/Df I/GHTIENS

FI6. rB*pro6n{flisEr8urroil opgt{EBs

BOTTOM

BOTTOM'il.ffi ffiffi'*"*ffi

PROTECTIVE+sErlPffi*'-Hl 'ee,#-ffiffi

FOR HELP OR ANSWERS TO QUESTIONS, CALT800-354-3643 or visit wwugeniecompany.com