pdf drysolidsbro
TRANSCRIPT
-
8/2/2019 .. PDF DrySolidsBro
1/4
D RY SOL ID S PROC ESS IN G EQU I P M EN T BE TTER BY D ESI GN
FOR USE ON POWDERS PELLETS FLAKES CHIPS AGGLOMERATES
-
8/2/2019 .. PDF DrySolidsBro
2/4
BIN ACTIVATORS
StandardTypes
Diameters: 2-16Features an exclusive dualbaffle to prevent compactionof material.
Construction Materials: Carbonsteel, special coatings, 304SS, 316SS.
Posibins
Diameters: 21 models from 20 to 8Capacity: 3 to 750 cu. ft.Bulk Density: to 200 lbs./cu. ft.Construction Materials: Carbonsteel, 304 or 316 stainless,
special coatings.
Sanitary Types
Diameters: 2-12Features an exclusive dual
baffle to prevent compactionof material.Construction Materials:304 or 316 stainless, polishedto a #4 finish. White neoprenefood grade continuous sleeve.
3A Dairy Approved
Live Bins
Diameters: 20 to 60Capacity: 3 to 100 cu. ft.
Bulk Density: to 100 lbs./cu.ft.Construction Materials:Carbon steel, 304 or 316stainless. Pressure designs to14.9 PSIG positive.
Sanitary Construction Available
Pre-Steamer/Discharger
Diameters: 8-16Features an exclusive dualbaffle to prevent compactionof material. Special steaminjection.Processing Temperature:250FConstruction Materials:304 or 316 stainless only.
-
8/2/2019 .. PDF DrySolidsBro
3/4
VOLUMETRIC SCREW FEEDERS
Standard TypesMetaTech
Accuracy: 1 to 1-1/2%(one minute samples)
Screw Sizes: 1/2 to 6 diameter
Feed Rates: 0.03 to550 cu. ft./hr.
With only two moving parts
Construction Materials:Carbon steel, carbon steelepoxy coated, 304 or 316 stainless;other specified materials.
MTP
For more difficult to feed materials;film scrap, wood chips, filter cake,asbestos powders, etc.
Accuracy: 1 to 1-1/2%(one minute samples)
Screw Sizes: 3, 4, 6 diameter; agitator/conditioning screws 8 and 10
Feed Rates: 3 to 550 cu. ft./hr.
Construction Materials: Carbon steel, carbon steelwith special coatings, 304 or 316 stainless
Sanitary TypesMTS
For sanitary applications(foods, pharmaceuticals, etc.)Quick disassembly featurewithout the use of tools.
Accuracy: 1 to 1-1/2%(one minute samples)
Screw Sizes: 1/2 to 6 diameter
Feed Rates: 0.03 to 550 cu. ft./hr.
Construction Materials:Contact surfaces, 304 or 316 stainlesspolished to a #4 finish. Food grade whiteneoprene gasketing. External carbonsteel parts painted white epoxy.
CombinationTypes
MTL CombinationScrew Feeder/Conveyor
Accuracy: 1 to 1-1/2% (one minute samples)
Screw Sizes: 6 to 20
Inlet to Outlet: 3 to 12
Feed Rates: 55 to 18,000 cu. ft./hr.
Construction Materials: Carbon steel, carbon steel epoxycoated, 304 and 316 stainless steel. Other materials available.
Mini Feeders
MTM
Accuracy: 1 to 1-1/2%(one minute samples)
Screw Sizes: 1/2, 3/4, 1,1-1/2, 2
Feed Rates: 0.03 to 20 cu. ft./hr.Requires only 12 x 16 foot print.
Construction Materials:Carbon steel, carbon steel epoxy coated,304 or 316 stainless steel. Other materials
and sanitary construction available.
Better-WeighFeedersAccuracy: 0.25% to 0.50%
Screw Sizes: 1/2, 3/4, 1, 1-1/2,2, 3, 4, 6
Feed Rates: 0.03 to550 cu. ft./hr.
Features: Platform and levelbalance scales, sealed tactile keyboard,7 digit numerical keypad, automaticmanual batching, 2 or 5 cu. ft. hopper.Sanitary construction available.
GRAVIMETRIC FEEDERS
COMPACT & MINIATURE
VOLUMETRIC SCREW FEEDERS
Better-WeighFeeder Controls
For Gain, Loss or ContinuousWeighing Applications
Enclosure: NEMA 4X
Display Type: 5.7 16 shades ofgrey (touch screen)
Visual Display: 4.72 x 3.5(touch screen)
Features: Automatic batching orcontinuous feed rate control,automatic feed rate optimization forfast/ slow speed settings and dribblepoint determination, numerous otheroperating features
-
8/2/2019 .. PDF DrySolidsBro
4/4
Dry Solids Processing EquipmentP.O. Box 9, Prices Switch Rd.,
Vernon, NJ 07462Tel: (973) 764-2000 FAX: (973)764-0272www.metalfabinc.comE-mail: [email protected]
CONTINUOUS MIXERULK BAG UNLOADER
VOLUMETRIC BELT FEEDERSONVEYORS
MODEL CB1Blends two or more materials into one.
Sizes: 6, 8, 10, 12, 16Feed Rates: As high as 2500 cu. ft./hr.
Construction Materials:Carbon steel, carbon steel withspecial coatings, 304 or 316stainless; other specified materials.Features: A/C constant speeddrive standard; other drivesavailable.
Handles: Lined and unlinedulk bags up to 3,300 lbs.
Materials: Powders andifficult to handle dryulk materials.
Construction Materials:arbon steel ortainless; available with or
without frame.eatures: Complete andositive discharge regardlessf bag contents. Dust-freeperation. Requires onlyne person. Unique designliminates spillage or waste.
MODEL APB
Accuracy: 1 to 2%(one minute samples)Belt Widths: 12, 24, 36, 48Belt Lengths: 36, 72, 108, 144respectivelyFeed Rates: to 5,000 cu. ft./hr.Construction Materials: Carbonsteel, 304 or 316 stainless steel, beltsstandard neoprene or HYCAR,Nordel, Viton, and special coatings.
MODEL Convey-All/ FSClexible Screw Conveyors
Handles: Powders, pellets, flakes,nd other dry solids.
Sizes: Two models in configurationsom 10-20 ft. lengths.
Screw Sizes/Conveying Notes: dia. helix screw for up to 150 cu../hr. and 4 dia. helix screw for upo 450 cu. ft./hr.Construction Materials: 304tainless steel helix screw andontact parts with 2B mill type finish.
White UHMW tube at 30-60 inclination.ptional sanitary design.eatures: Only one
moving part. Top andottom cleanout parts.ust-free connections.
MODEL Convey-All/ VTCVibratory Tube Conveyors
Handles: High ratesf difficult flowing or
iable dry solids.Sizes: Nine models in-10 ft. lengths.
Conveying Notes: 6, 8 & 10ia. tubes convey up to 400 cu. ft./hr.
Construction Materials: 304tainless steel with 2B mill type finish.eatures: Only two moving parts.lamp on vibrating tube. Choice of topr bottom mounted conveyor and/orrive. Easily accessible cleanout ports.
For literature and complete information on any of these dependable,
quality-built dry bulk solids processing products, contact your Metalfabrepresentative, or call or write:
onvey-All is a trademark of Metalfab, Inc.Better-Weigh is a registered trademark of Metalfab, Inc.osibin is a trademark of Metalfab, Inc.YCAR is a registered trademark of Noveon, Inc.
ordel
and Viton
are registered tradmarks of DuPontCopyright, Metalfab, Inc., 2003, Rev. 3/07 Printed in USA