Automatic Edgebander with chain feeding system

E550E550 PM

E550 PMVR E550 CR

E550 PMCR

Pre-milling unit with 2 diamond cutterblocks rotating in opposite directions to obtain an invisible glueing line

The most complete solution for companies who want top quality processing on all types of panels.

Maximum finishing quality Chain feeding system Pre-milling Gluing with polyurethane glue Corner rounding unit 3 free spaces for finishing units

Minimum space occupied 3.2 m PM version 3.7 m PM CR version

High performance 9 m/min feed speed 50 mm panel height 3 mm edge coils 5 mm solid wood strips

E550E550

Easy to use Unit settings with a piece of edge Easy and intuitive use of machine Flush trimmers with multiprofile tool (thin-R1-R2- strips)

Chain feeding system Logic functioning controlled by PLC 3 free spaces for finishing units

PMVR VR End Trim unit with vertical rounding function (Opt)

Corner rounding unit to finish panel corners with straight, bevelled and shaped edges

Automatic edgebander with chain feedAutomatic edgebander with chain feed

HF 12000 RPM

1Free space

1Free space

1Free space

HF 12000 RPM

HF 12000 RPM

1Free space

1Free space

1Free space

HF 12000 RPM

HF 12000 RPM

1Free space

1Free space

1Free space

HF 12000 RPM

1Free space

1Free space

1Free space

HF 12000 RPM

HF 12000 RPM

1Free space

1Free space

1Free space

RR

Processing both with PUR and EVA glue

With PUR glue it is possible to stopmachine (up to 4 days) without having to effect any cleaning procedure.

Automatic cleaning of glue spreader roller

Glue roller with integrated heating –> uniform and constant glue temperatureGranule manual loading(glue pot 0,5 Kg)

Upon request an additionalinterchangeable glue pot is available.

Automatic glue drainage cycle.Equipped with a drip tank of the glue discharged during the drain cycle

Impossibile to go wrong; the graphic visualizes directly the result of the process on the edged panel

Just one click to choose the desired workmanship

Water resistant at any temperature:hold and bonding of edge which cannot be obtained by any other traditional gluing systems.

Invisible joints: finishing quality incomparable in regards to other traditional gluing systems

190°PUR

1 2 3 4 5

1212

190°PUR

1 2 3 4 5

Glueing unit (opt.)

Revolutionary glueing technology

Touchscreen control

Easy to use, Intuitive and Immediate

7” Colour display

Save n° 99 working programmes

Connect to the network (opt.) to read statistical data, diagnosis and on line up dating

“At last, perfect glueing for every level of investment”

End Trimming unit

PERFORMANCEAND VERSATILITY

2 blades for perfect front/rear end trimming on all types of edges

Operating cycle controlled by PLC

HF motor 200 Hz – 12.000 rpm – 0.22 kW

Integrated suction system

Gluing unit PURE (opt.)

POLYURETHANE GLUEWITHOUT ANY PROBLEMS

You can process either with polyu rethane glue (PUR) or with EVA glue

With the PUR glue it is possible to stop machine (up to 4 days) without having to effect any cleaning procedure.

Granule manual loading (glue pot 0,5 Kg) Automatic clearing of glue

spreader roller Interchangeable glue pot

Pre-milling unit

INVISIBLEGLUEING LINE

DIAMOND tools Ø = 60 mm H = 52 mm

HF motors 200 Hz – 12.000 rpm – 0.75 kW (each)

Dedicated suction system and blower for panel cleaning before glueing

HF 12000 RPM

FlushTrimming unit

MULTIRADIUS R1 & R2

Easy to change edge when processing

1. Thin2. Thickness 1 mm3. Thickness 2 mm4. Soldi wood up to 5 mm

N. 2 motors HF 200 Hz. - 12.000 RPM - 0,37 Kw

HF 12000 RPM

MIRROR FINISHING

Spray function controlled by PLC

2 sprayers (lower and upper) and liquid tank

Polishing spray unit (optional)

Buffing unit(optional)

BRIGHT AND SHINY EDGES

Uniform colouring and finishing even on processed edges

2 motors for buffing unit diameter 120 mm rotating at 1.400 rpm

Antistatic and Cooling Spray Unit (opt.)

ALWAYS USE BESTWORKING CONDITIONS

Function of spray controller by PLC electrical

N.2 sprayers (bottom and top) and liquid tank

Suggested optional when the PURE gluing unit is foreseen

Alternatively you can choose the slipping liquid for glossy and delicated panels and edges (High-gloss)

Infraredlamp (optional)

TO GUARANTEE THE BESTGLUEING CONDITIONS

Creates the best conditions for perfect glueing

Heats panels and removes all traces of dampness

Anti-Adherence spraying unit(optional)

INSTANT PERFECT CLEANING

Spray function controlled by PLC

2 sprayers (lower and upper) and liquid tank

Compulsory optional when the PURE gluing unit is foreseen.

Glue Scrapingunit (optional)

REMOVAL OF EXCESS GLUE

Copier discs with automatic cleaning system

Two separate knobs which allow an easy positioning of the tool and a fast exclusion of the unit

Edge Scraping unit (optional)

PERFECT PLASTIC EDGES EVEN IN BACKLIGHT

Blowers for detachment and removal of shavings

Dust extraction system complete with box to separate and collect edge scraping shavings

Corner Rounding unit

PERFECT FINISHING

Finishing of front and rear corners on straight, bevelled and postformed panels

Diamond cutterblock

Possibility to select from PLC the processed front, rear or complete panel

PMCR

PMVR

Pre-milling unit

INVISIBLE GLUEING LINE

DIAMOND tools Ø = 60 mm H = 52 mm

HF motors 200 Hz – 12.000 rpm – 0.75 kW (each)

Dedicated suction system and blower for panel cleaning before glueing

HF 12000 RPM

Buffing unit(optional)

BRIGHT AND SHINYEDGES

Uniform colouring and finishing even on processed edges

2 motors for buffing unit diameter 120 mm rotating at 1.400 rpm

Gluing unit PURE (opt.)

POLYURETHANE GLUEWITHOUT ANY PROBLEMS You can process either with polyurethane glue (PUR) or with EVA glue With the PUR glue it is possible to stop machine

(up to 4 days) without having to effect any cleaning procedure. Granule manual loading (glue pot 0,5 Kg) Automatic clearing of glue spreader roller Interchangeable glue pot

FlushTrimming unit

MULTIRADIUS R1 & R2

Easy to change edge when processing1. Thin2. Thickness 1 mm3. Thickness 2 mm4. Soldi wood up to 5 mm

N. 2 motors HF 200 Hz. - 12.000 RPM - 0,37 Kw

HF 12000 RPM

Anti-Adherencespraying unit(optional)

INSTANTPERFECT CLEANING

Spray function controlled by PLC

2 sprayers (lower and upper) and liquid tank

Compulsory optional when the PURE gluing unit is foreseen.

Infraredlamp (optional)

TO GUARANTEETHE BEST GLUEING CONDITIONS

Creates the best conditions for perfect glueing

Heats panels and removes all traces of dampness

VREnd Trim unit

TWO PROCESSES IN UNIQUE PASSAGE

VR End Trim unit with vertical rounding function (Opt)

Vertically mills off front and rear excess edge of panel whenbeing processed

2 processing modes: - straight (thin edges and wooden strips)- radius (ABS and PVC thick edges)

RR

Edge Scraping unit (optional)

PERFECT PLASTIC EDGES EVEN IN BACKLIGHT

Blowers for detachment and removal of shavings

Dust extraction system complete with box to separate and collect edge scraping shavings

Glue Scrapingunit (optional)

REMOVAL OF EXCESS GLUE

Copier discs with automatic cleaning system

Two separate knobs which allow an easy positioning of the tool and a fast exclusion of the unit

Polishing spray unit (optional)

MIRROR FINISHING

Spray function controlled by PLC

2 sprayers (lower and upper) and liquid tank

We reserve the right to make technical modifications. The machines illustrated may include fittings and accessories not included on standard machine versions.For photographic purposes, some units are shown without protections. Machines must however always be used with all protections fitted and operative.

Min./max. panel height min. 8 – max. 50 mm Min./max. edge thickness 0.4 – 3 mm (coils) / 0.4 – 5 mm (strips)Panel width min. 95 mm Panel length (Side being processed) min. 110 mm Panel feed speed 9 m/min Pre-milling motors (each) 200 Hz – 12.000 rpm – 0.75 kWGlue pot heating element 1315 W – 6 cartridgesEnd trimming motor 200 Hz – 12.000 rpm – 0.22 kWFlush trimming motors (each) 200 Hz – 12.000 rpm – 0.37 kWCutterblocks with combined WIDIA disposable Knives (radius/bevelled) Ø 75 mm Z4 – hole Ø 16 mm (r = 2–3 mm)Total power installed 5 kW approx. Weight 525 Kg approx.

Technical features

Overall dimensions

200

cm

95 c

m

L1

L2

L1 L2 E550

E550 PM

E550 CR

E550 PM CR

261 313

261 313

311 363

311 363

[cm] [cm]

Chain panel feedingTHE DEFINITIVE SOLUTIONFOR INDUSTRIAL QUALITY EDGEBANDING

Firm grip of panel guaranteed by special non-slip rubber on the pads.

Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre.

Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre.

SPECIAL OPERATIONS Allows to edge panels with cavities to hold hardware The flush trim copier is equipped with n. 3 bearings

which guarantee the n.3 supporting points.

The internal led lights on the units allows to make adjustments in safety, even with bad outside lighting.

“Nesting” copiers (opt.) Internal LED light (opt.)

ALL UNITS UNDER CONTROL

Options for free spaces

Options without occupying spaces

HF 12000 RPM

1Free space

1Free space

1Free space

HF 12000 RPM

HF 12000 RPM

1Free space

1Free space

1Free space

HF 12000 RPM

1Free space

1Free space

1Free space

HF 12000 RPM

Compositions

HF 12000 RPM

1Free space

1Free space

1Free space

PMVRHF 12000 RPM

1Free space

1Free space

1Free space

HF 12000 RPM

RR

TWO PROCESSES IN UNIQUE PASSAGE

Cut and vertically mills of front and rear excess edge ofpanel when being processed

2 processing modes:- straight (thin edges and wooden strips)- radius (ABS and PVC thick edges)

Unit managed by the electronic control with the pos-sibility to specifically choose the processing mode for the front and the rear of the panel

High frequency motor 0,22kW – 12.000 RPM

Intergrated dust extraction system

VR End Trim unit with vertical rounding function (Opt)

E 550 - E550 CR - E550 PM - E550 PM CR 072018 - ENG

Via Guardia di Rocca, 14 47899 Serravalle - Repubblica di San Marino Tel. +378 0549 960011sales@smmeccanica.sm

Via Tane di Baragone, 11 47899 Serravalle - Repubblica di San Marino Tel. (+378) 0549/900720sales@newsamec.sm

T E C H N O L O G Y F O R

B U I L D I N G / A R C H I T E C T U R E T R A N S P O R T I N D U S T RY V I S U A L C O M M U N I C AT I O NW O O D W O R K I N G ( E D G E B A N D E R S )

T E C H N O L O G Y F O R A L U M I N I U M A N D C O M P O S I T E PA N E L S :

www.casadei-industria.com