What’s in the box . . .

Power cord

Soundtracksoundbar

Grille

Feet

On-wall brackets

Subwoofer feet and screws

Soundtracksubwoofer with cradle

(Adaptor for use in horizontal position, wired connection only)

#2 Phillips (not supplied)

3.5 mm Cable Remote

Paradigm, Soundtrack and associated proprietary and patented designs and technologies are registered trademarks of Paradigm Electronics Inc. Copyright © Paradigm Electronics Inc. All rights reserved. All other trademarks are the property of their respective owner(s). Paradigm Electronics reserves the right to change specifications and/or features without notice as design improvements are incorporated.

Paradigm Electronics Inc. 205 Annagem Blvd., Mississauga, ON Canada L5T 2V1

REV. 100912

For more information visit www.paradigm.com/shift

Set-Up Guide

The O�cial Sound of YOU™

Power cordDigital optical cableAmpli�ed Soundbar and Wireless Subwoofer

AB

Dual RCA cable

B C DYour Soundtrack System is capable of learning codes from remote controls you are using for other sources. See manual for details.

Paradigm_Soundtrack_Set-Up_Guide_EN.indd 1 12-10-09 2:33 PM

BEFORE YOU BEGIN, READ THE SAFETY PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS INCLUDED IN THE OWNERS MANUAL.

OPTIONAL Setting up the soundbar

To �nd your iOS version:SETTINGS GENERAL ABOUTIf your version is not 4.3, upgrade now.

YES

NO

50’or 15 Meters

Wireless Range

Wireless pairing

2 31

5

+ BASS

– BASS

+ BASS

– BASS

50’or 15 Meters

Wireless Range

1 2 3 4 5

+ BASS

– BASS

NOTE: Choose analogOR digital connections

OPTIONAL: For wall mounting instructions, refer to Owners Manual.

3.5-mm to mobile audio device,not included

Connecting to source Power connection

Adjust subwoofer loundness

Analog connection to TV (use for good audio)

Digital connection to TV (use for best audio)

B

C

*If the soundbar Wireless Status Indicator alternates between red and blue blinking, pairing has failed and the process must be repeated.

Power on, sync to subwoofer Wireless setting Power connection Wireless status indicator Adjust subwoofer loundness

Volume

Power

Input Selector

Wireless Sync

Attach the Feet Attach feet to subwoofer for horizontal positioning

TV

Lay your soundbar face down on a soft surface. Insert feet as shown, press �rmly until you hear a 'click'.

Attach the feet.

Your subwoofer’s LEVEL switch is set to 12 o’clock to suit average preferences. If desired, adjust up or down to match sound level of your speakers.

Move switch to “wireless” setting on subwoofer.

Connect to power source.Using the Remote or Onboard Interface. Turn Power ON and repeatedly press Input Selector until you hear audio. Press the Wireless Sync button to initiate connection to subwoofer. NOTE: Within 15 seconds plug in subwoofer.

The Wireless Status Indicator on the soundbar should blink blue for less than 30 seconds and then go back to normal operation.

Your subwoofer’s LEVEL switch is set to 12 o’clock to suit average preferences. If desired, adjust up or down to match sound level of your speakers.

Connect to power source.

C

A

B

E

Feet must be attached for heat dissipation clearance

#2 Phillips (not supplied)

2

*If the soundbar Wireless Status Indicator alternates between red and blue blinking, pairing has failed and the process must be repeated.

Wireless status indicator

The Wireless Status Indicator on the soundbar should blink blue for less than 30 seconds and then go back to normal operation.

1 Power on, sync to subwoofer

Volume

Power

Input Selector

Wireless Sync

Using the Remote or Onboard Interface. Turn Power ON and repeatedly press Input Selector until you hear audio. Press the Wireless Sync button to initiate connection to subwoofer.

50’or 15 Meters

Wireless Range

43 Wireless settingPower connectionMove switch to “wireless” setting on subwoofer.

Connect to power source.

D

Paradigm_Soundtrack_Set-Up_Guide_EN.indd 2 12-10-09 2:33 PM