© visonic ltd. 1999 powercode c-2250-9 (rev. 6/99 ...trouble signal t r o u b l a r m mcr-308...
TRANSCRIPT
Product Description Power Supply CurrentConsumption
TypeBatterySupervision
Stationary transmitters & detectors
Mobile transmitters
K-940MCWPet Immune Detector
MCT-100Universal Transmitter
MCT-423Smoke Detector
MCT-302Magnetic Contact
MCT-231MCT-231 WPPendant-Style Transmitters
MCT-134Four-Button HandheldTransmitter
Visonic Ltd fully supervisedwireless components are supportedby every control panel on the market. Innovation and quality are built into everyVisonic Ltd product. Code-Secure™ and Anti-Collision technologies combined withextra long-life batteries ensure signal integrity, reliability, and performance thatcannot be matched.
MCT-211WaterproofWristband-StyleTransmitter
MCR-308Four-Zone Receiver
MCR-304One-Zone Receiver
Receivers
MCR-308 Four-Zone Receiver White 108 x 165 x 38 mm(4-1/4 x 6-1/2 x 1-1/2 in.)
Receivers10.5-16 VDC 45 mA Supervised and
Code-Secure™MCR-304 One-Zone Receiver White 110 x 63 x 25 mm
(4-5/16 x 2-1/2 x 1 in.)12 VDC 32 mA Supervised and
Code-Secure™
MCPIR-3000 Passive Infrared Automatic White 104 x 60 x 32 mm(2.4 x 4.1 x 1.3 in.)
Wireless Detectors3.6 V lithium battery 15 µA standby
9.5 mA operation
MCT-423 Smoke Detector Automatic9 V alkaline battery White 140 x 50 mm(5-1/2 x 2 in.)
Supervised
30 µA standby20 mA operation
Supervised
K-940 MCW Pet Immune PIR Automatic White 104 x 60 x 32 mm(4-1/10 x 2-2/5 x 1-1/3 in.)
3.6 V lithium battery 15 µA standby9.5 mA operation
Supervised
Accessories
MCX-8 8 Zone Expander 12 VDC n/a White 108 x 165 x 38 mm(4-1/4 x 6-1/2 x 1-1/2 in.)
MCX-600 Repeater / Range Expander 13-20 VDC, or11-16 VAC, 100 mA min
Supervised only White 110 x 63 x 25 mm(4-5/16 x 2-1/2 x 1 in.)
5 mA per relayRL-8 8 Relay Output Adapter 10.5-16 VDC 96 x 67 x 15 mm(3-5/8 x 2-5/8 x 19/32 in.)
Gray
Pendant-Style Transmitters
3 V alkaline batteryMCT-231 One-Button 0.1 µA standby6 mA operation
Code-Secure™Manual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
MCT-201 Gray 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
12 V alkaline batteryOne-Button 0 at standby6 mA operation
Non-supervisedManual
Waterproof Pendant-Style Transmitters
MCT-231WP One-Button 3 V alkaline battery 0.1 µA standby6 mA operation
Code-Secure™ GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
PCB only
W I R E L E S S
PowerCode™ Wireless
Visonic Ltd reserves the right to change specifications without prior notice. Fullwarranty statement available upon request.
Color Dimensions
Handheld Transmitters
MCT-201WP One-Button 12 V alkaline battery 6 mA operation Non-supervised GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
MCT-201AT Sealed Waterproof 3 V lithium battery 1 µA standby9 mA operation
Non-supervised GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
Waterproof Wristband-Style Transmitter
MCT-211 One-Button 3 V lithium battery 4.5 mA operation Non-supervised Black ø 35 mm (1.4 in.)Manual
Universal & Magnetic Contact Transmitters
MCT-100 Universal Transmitter 3.6 V lithium battery 5 µA standby8 mA operation
Supervised WhiteAutomatic 110 x 63 x 25 mm(4-5/16 x 2-1/2 x 1 in.)
MCT-302 Magnetic ContactTransmitter
3.6 V lithium battery 5 µA standby8 mA operation
Supervised WhiteAutomatic 81 x 22 x 23.5 mm(3-3/16 x 7/8 x 15/16 in.)
*Models with inactivity supervision must remain within the range of the receiver atall times for proper operation.
Note: Operating Temperatures 0° - 49° C (32° - 120° F)
Committed to Advancing Security
Fully supervised wirelesssystem
�
�
�
�
Long-life lithium battery included
Extended communication range
Anti-collision signaling
Waterproof products
Easy to install and operate
16 million different code combinations
�
�
PowerCode™ WirelessW
IRE
LE
SS
105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
MCT-101* One-Button 3.6 V lithium battery 1 µA standby6 mA operation
Supervised (selectable) GrayManual
MCT-102* 1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Two-Button 3.6 V lithium battery Supervised (selectable)Manual
MCT-104* 1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Four-Button 3.6 V lithium battery Supervised (selectable)Manual
MCT-131 One-Button 3.6 V lithium battery 0.1 µA standby6 mA operation
Code-Secure™ Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Manual
MCT-132 0.1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Two-Button 3.6 V lithium battery Code-Secure™Manual
MCT-134 0.1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Four-Button 3.6 V lithium battery Code-Secure™Manual
�
�
�
�
�
Features
Code-Secure™ technology
Fully supervised
Attractive, elegant design
Reporting of tamper
and RF signal jamming
Transmitter inactivity and
low battery indication
SIISO 9000
Th
eS
t an d a r d s I n s t i t u t i o n
o fI s
r ae
l
Quali
ty
A s s u r ed
Firm
Head Office (Israel): Tel (972-3) 645-6789, Fax (972-3) 645-6788Visonic Inc. (U.S.A.): Tel (1-860) 243-0833, (1-800) 223-0020, Fax (1-860) 242-8094Visonic Ltd (U.K.): Tel (44-1767) 600857, Fax (44-1767) 601098Visonic Iberica (Spain): Tel (34-91) 4134575, Fax (34) 91 4134597Visonic GmbH (Germany): Tel (49-2173) 32422, Fax (49-2173) 32416Visonic Ltda (Latin America): Tel (598-2) 707-6170, Fax (598-2) 707-6169Visonic Ltd Representative Office (Singapore): Tel (65) 832-5090, Fax (65) 832-5091I n t e r n e t W e b s i t e : w w w. v i s o n i c . c o m
© V
ISO
NIC
LT
D. 1
999
PO
WE
RC
OD
E C
-225
0-9
(R
EV.
6/9
9)
TROUBLE
SIGNAL
TROUBL
ARM
MCR-308 ReceiverThe MCR-308 is a superheterodyne UHF receiver designed to convert virtually
any hardwired alarm panel into a fully supervised wireless system. Thisreceiver provides 4 zone outputs, with up to four transmitters per zone,
and four reporting outputs: tamper, inactivity, low battery and RF signaljamming. By using the MCX-8 expander module, this receiver can
provide up to 28 outputs, utilizing 112 transmitter devices.
MCX-8 ExpanderThis module is used in applications that require more than 16
transmitters, or when more than four separate outputs are needed.Each MCX-8 provides eight zone outputs (up to four transmitters per
output). Up to three expanders can be used with a single MCR-308,permitting up to 28 outputs and 112 transmitters in a single system.
Wireless alarm systems are one of the fastest growing segments of the security industry. This tremendous
growth is attributed to the significant reduction in the cost of labor when installing wireless systems compared
to hardwire systems. Reliability and ease of installation are essential elements when considering wireless
products. Visonic Ltd’s fully supervised wireless products provide the features that professional installers
require: reporting of low battery, tamper protection, RF signal jamming, and transmitter inactivity.
Visonic Ltd's innovative Code-Secure™ technology ensures that transmitter signals used for arming and
disarming control panels, or opening doors and gates, are always secure. Visonic Ltd also incorporates a
unique “anti-collision” transmission sequence in its PowerCode™ transmitters. The “anti-collision” feature
assures that signals transmitted at the same time are acknowledged by the receiver. Visonic Ltd's PowerCode™
series of wireless equipment is easy to install, easy to use, and provides reliable operation day in and day out.
The importance of Code-Secure™ technology
Code-Secure™ technology is extremely important when mobile
transmitters are used. Cellular phone codes, car alarm and garage
door opener codes are particularly at risk. Potential intruders copy,
or “clone”, security alarm system codes and use them to disarm
alarm systems whenever they choose. Visonic Ltd’s Code-Secure™
transmitters solve this problem. Every time a Visonic Ltd
Code-Secure™ transmitter sends a signal, it uses a different code
known only to its intended receiver. The result
is a secure system that cannot be cloned, copied or grabbed.
MCPIR-3000 Wireless DetectorThe MCPIR-3000 is the mostcompact wireless PIR detectorin the industry. It provides a standard12m X 12m (40’ X 40’) pattern.Adjustable pulse count, verticaladjustment and a visible lightrejection filter virtually eliminate falsealarms.
MCT-100 Universal TransmitterThe MCT-100 provides two inputs that canbe used to transmit signals from hardwiremagnetic contacts, battery-operatedglassbreak detectors, or any other devicethat provides N.O. or N.C. output.The MCT-100 inputs can be configured asN.O., N.C. or E.O.L. resistor.
MCT-302Magnetic ContactThe MCT-302 is one of the smallestwireless magnetic contacts in the industry.It features a built-in reed switch and an auxiliary hardwired input,programmable as either N.C. or N.O. with an End-of-Line (E.O.L.)resistor. The auxiliary input can be used with additional products,such as pushbuttons, detectors, magnetic contacts and more. AnLED lights during transmission, whenever alarm or tamper signalsare reported.
MCT-231/ MCT-231WP (Waterproof)Small and compact pendant/keychain-style transmitters fit easily into a pocketor on a necklace. Both provideCode-Secure™ technology and will reportlow battery signals to the receiver .
MCT-131
MCT-132
MCT-134
MCT-423 Smoke DetectorThe MCT-423 is a low current smokedetector that uses advanced photoelectrictechnology to detect smoke or fire. Uponsmoke detection, the MCT-423 initiatesan audible sound and sends an RFtransmission.
MCT-131, MCT-132 andMCT-134 TransmittersMCT series handheldtransmitters provide Code-Secure™ technology and areavailable in one, two and four-button configurations. A long-life lithium battery is includedwith each transmitter, and lowbattery signals are reported tothe receiver.
MCT-211 Wristband TransmitterA waterproof wristband transmitter isthe perfect solution for personalemergency signaling when thetransmitter needs to be within easy reachat all times.
Mobile transmitters
Stationary transmitters & detectorsStationary transmitters provide low battery supervision and arepowered by a long-life 3.6 V lithium battery. A supervisory signalis sent every 60 minutes to ensurethat the transmitters are in placeand operational.
K-940 MCW Wireless Pet Immune DetectorThe K-940 MCW offers similar featuresas the MCPIR-3000, and provides petimmunity for animals up to 18 kg (40 lb).
RL-8 Output AdapterThe RL-8 is an "open collector-to-dry
contact" adapter, designed to serve as aninterface unit between the outputs of the
MCR-308 and alarm control panels thatrequire dry contact zone inputs.
The reliability of Supervision
Visonic Ltd’s fully supervised fixed and handheld transmitters are wireless
signaling devices designed for integration with alarm systems. An hourly
Supervision Message informs the receiver of an active presence of a
transmitter in the system and its status. In case of an alarm, a message
is transmitted to the receiver along with the ID of the alarm device.
For increased system reliability, improved maintenance and enhanced
trouble detection capability, Visonic Ltd’s
fully supervised transmitters lead
the way.Expanders
Receivers
Easy Learn ModeCoding transmitters is a quick and easy operation. Simply set the receiverto the "learn" mode, and send a transmission to the receiver. The receiverwill provide both visual and audible feedback upon successful enrollmentof the transmitter into the system.The receiver uses a non-volatile EEPROM memory. In the unlikely event
of power loss, all programming information will be retained.
MCR-304 ReceiverThe MCR-304 is a superheterodyne UHF receiver designed for smallersystems. The MCR-304 provides a one zone (N.O./N.C.) output andthree reporting outputs (tamper, low battery and inactivity). Up to tentransmitters can be assigned to the alarm output. The MCR-304 "learns"the ID of selected transmitters and will provide visual feedback uponsuccessful enrollment of the transmitter(s) into the system.
The MCR-308 converts hardwired alarm control panelsinto a fully supervised wireless system.
MCX-600 ExpanderThis module is a microprocessor-controlled wireless repeater, designedto relay digital data between wireless PowerCode™ transmitters and atarget PowerCode™ receiver. If the distance between the transmitters andthe target receiver is too large to be covered by one repeater, severalauxiliary repeaters may be added along the communication path. This way,a multi-level network is created. Up to 16 repeaters can be added to thesystems. The MCX-600 is not compatible with Code-Secure™ devices.
WIRELESSPOWERCODE™TRANSMITTERSAND DETECTORS(UP TO 4 UNITSPER OUTPUT)
MCR-308 RECEIVERHARDWIREDCONTROL PANEL
• Supervised versions
MCT-101, MCT-102, and
MCT-104 available
TROUBLE
SIGNAL
TROUBL
ARM
MCR-308 ReceiverThe MCR-308 is a superheterodyne UHF receiver designed to convert virtually
any hardwired alarm panel into a fully supervised wireless system. Thisreceiver provides 4 zone outputs, with up to four transmitters per zone,
and four reporting outputs: tamper, inactivity, low battery and RF signaljamming. By using the MCX-8 expander module, this receiver can
provide up to 28 outputs, utilizing 112 transmitter devices.
MCX-8 ExpanderThis module is used in applications that require more than 16
transmitters, or when more than four separate outputs are needed.Each MCX-8 provides eight zone outputs (up to four transmitters per
output). Up to three expanders can be used with a single MCR-308,permitting up to 28 outputs and 112 transmitters in a single system.
Wireless alarm systems are one of the fastest growing segments of the security industry. This tremendous
growth is attributed to the significant reduction in the cost of labor when installing wireless systems compared
to hardwire systems. Reliability and ease of installation are essential elements when considering wireless
products. Visonic Ltd’s fully supervised wireless products provide the features that professional installers
require: reporting of low battery, tamper protection, RF signal jamming, and transmitter inactivity.
Visonic Ltd's innovative Code-Secure™ technology ensures that transmitter signals used for arming and
disarming control panels, or opening doors and gates, are always secure. Visonic Ltd also incorporates a
unique “anti-collision” transmission sequence in its PowerCode™ transmitters. The “anti-collision” feature
assures that signals transmitted at the same time are acknowledged by the receiver. Visonic Ltd's PowerCode™
series of wireless equipment is easy to install, easy to use, and provides reliable operation day in and day out.
The importance of Code-Secure™ technology
Code-Secure™ technology is extremely important when mobile
transmitters are used. Cellular phone codes, car alarm and garage
door opener codes are particularly at risk. Potential intruders copy,
or “clone”, security alarm system codes and use them to disarm
alarm systems whenever they choose. Visonic Ltd’s Code-Secure™
transmitters solve this problem. Every time a Visonic Ltd
Code-Secure™ transmitter sends a signal, it uses a different code
known only to its intended receiver. The result
is a secure system that cannot be cloned, copied or grabbed.
MCPIR-3000 Wireless DetectorThe MCPIR-3000 is the mostcompact wireless PIR detectorin the industry. It provides a standard12m X 12m (40’ X 40’) pattern.Adjustable pulse count, verticaladjustment and a visible lightrejection filter virtually eliminate falsealarms.
MCT-100 Universal TransmitterThe MCT-100 provides two inputs that canbe used to transmit signals from hardwiremagnetic contacts, battery-operatedglassbreak detectors, or any other devicethat provides N.O. or N.C. output.The MCT-100 inputs can be configured asN.O., N.C. or E.O.L. resistor.
MCT-302Magnetic ContactThe MCT-302 is one of the smallestwireless magnetic contacts in the industry.It features a built-in reed switch and an auxiliary hardwired input,programmable as either N.C. or N.O. with an End-of-Line (E.O.L.)resistor. The auxiliary input can be used with additional products,such as pushbuttons, detectors, magnetic contacts and more. AnLED lights during transmission, whenever alarm or tamper signalsare reported.
MCT-231/ MCT-231WP (Waterproof)Small and compact pendant/keychain-style transmitters fit easily into a pocketor on a necklace. Both provideCode-Secure™ technology and will reportlow battery signals to the receiver .
MCT-131
MCT-132
MCT-134
MCT-423 Smoke DetectorThe MCT-423 is a low current smokedetector that uses advanced photoelectrictechnology to detect smoke or fire. Uponsmoke detection, the MCT-423 initiatesan audible sound and sends an RFtransmission.
MCT-131, MCT-132 andMCT-134 TransmittersMCT series handheldtransmitters provide Code-Secure™ technology and areavailable in one, two and four-button configurations. A long-life lithium battery is includedwith each transmitter, and lowbattery signals are reported tothe receiver.
MCT-211 Wristband TransmitterA waterproof wristband transmitter isthe perfect solution for personalemergency signaling when thetransmitter needs to be within easy reachat all times.
Mobile transmitters
Stationary transmitters & detectorsStationary transmitters provide low battery supervision and arepowered by a long-life 3.6 V lithium battery. A supervisory signalis sent every 60 minutes to ensurethat the transmitters are in placeand operational.
K-940 MCW Wireless Pet Immune DetectorThe K-940 MCW offers similar featuresas the MCPIR-3000, and provides petimmunity for animals up to 18 kg (40 lb).
RL-8 Output AdapterThe RL-8 is an "open collector-to-dry
contact" adapter, designed to serve as aninterface unit between the outputs of the
MCR-308 and alarm control panels thatrequire dry contact zone inputs.
The reliability of Supervision
Visonic Ltd’s fully supervised fixed and handheld transmitters are wireless
signaling devices designed for integration with alarm systems. An hourly
Supervision Message informs the receiver of an active presence of a
transmitter in the system and its status. In case of an alarm, a message
is transmitted to the receiver along with the ID of the alarm device.
For increased system reliability, improved maintenance and enhanced
trouble detection capability, Visonic Ltd’s
fully supervised transmitters lead
the way.Expanders
Receivers
Easy Learn ModeCoding transmitters is a quick and easy operation. Simply set the receiverto the "learn" mode, and send a transmission to the receiver. The receiverwill provide both visual and audible feedback upon successful enrollmentof the transmitter into the system.The receiver uses a non-volatile EEPROM memory. In the unlikely event
of power loss, all programming information will be retained.
MCR-304 ReceiverThe MCR-304 is a superheterodyne UHF receiver designed for smallersystems. The MCR-304 provides a one zone (N.O./N.C.) output andthree reporting outputs (tamper, low battery and inactivity). Up to tentransmitters can be assigned to the alarm output. The MCR-304 "learns"the ID of selected transmitters and will provide visual feedback uponsuccessful enrollment of the transmitter(s) into the system.
The MCR-308 converts hardwired alarm control panelsinto a fully supervised wireless system.
MCX-600 ExpanderThis module is a microprocessor-controlled wireless repeater, designedto relay digital data between wireless PowerCode™ transmitters and atarget PowerCode™ receiver. If the distance between the transmitters andthe target receiver is too large to be covered by one repeater, severalauxiliary repeaters may be added along the communication path. This way,a multi-level network is created. Up to 16 repeaters can be added to thesystems. The MCX-600 is not compatible with Code-Secure™ devices.
WIRELESSPOWERCODE™TRANSMITTERSAND DETECTORS(UP TO 4 UNITSPER OUTPUT)
MCR-308 RECEIVERHARDWIREDCONTROL PANEL
• Supervised versions
MCT-101, MCT-102, and
MCT-104 available
TROUBLE
SIGNAL
TROUBL
ARM
MCR-308 ReceiverThe MCR-308 is a superheterodyne UHF receiver designed to convert virtually
any hardwired alarm panel into a fully supervised wireless system. Thisreceiver provides 4 zone outputs, with up to four transmitters per zone,
and four reporting outputs: tamper, inactivity, low battery and RF signaljamming. By using the MCX-8 expander module, this receiver can
provide up to 28 outputs, utilizing 112 transmitter devices.
MCX-8 ExpanderThis module is used in applications that require more than 16
transmitters, or when more than four separate outputs are needed.Each MCX-8 provides eight zone outputs (up to four transmitters per
output). Up to three expanders can be used with a single MCR-308,permitting up to 28 outputs and 112 transmitters in a single system.
Wireless alarm systems are one of the fastest growing segments of the security industry. This tremendous
growth is attributed to the significant reduction in the cost of labor when installing wireless systems compared
to hardwire systems. Reliability and ease of installation are essential elements when considering wireless
products. Visonic Ltd’s fully supervised wireless products provide the features that professional installers
require: reporting of low battery, tamper protection, RF signal jamming, and transmitter inactivity.
Visonic Ltd's innovative Code-Secure™ technology ensures that transmitter signals used for arming and
disarming control panels, or opening doors and gates, are always secure. Visonic Ltd also incorporates a
unique “anti-collision” transmission sequence in its PowerCode™ transmitters. The “anti-collision” feature
assures that signals transmitted at the same time are acknowledged by the receiver. Visonic Ltd's PowerCode™
series of wireless equipment is easy to install, easy to use, and provides reliable operation day in and day out.
The importance of Code-Secure™ technology
Code-Secure™ technology is extremely important when mobile
transmitters are used. Cellular phone codes, car alarm and garage
door opener codes are particularly at risk. Potential intruders copy,
or “clone”, security alarm system codes and use them to disarm
alarm systems whenever they choose. Visonic Ltd’s Code-Secure™
transmitters solve this problem. Every time a Visonic Ltd
Code-Secure™ transmitter sends a signal, it uses a different code
known only to its intended receiver. The result
is a secure system that cannot be cloned, copied or grabbed.
MCPIR-3000 Wireless DetectorThe MCPIR-3000 is the mostcompact wireless PIR detectorin the industry. It provides a standard12m X 12m (40’ X 40’) pattern.Adjustable pulse count, verticaladjustment and a visible lightrejection filter virtually eliminate falsealarms.
MCT-100 Universal TransmitterThe MCT-100 provides two inputs that canbe used to transmit signals from hardwiremagnetic contacts, battery-operatedglassbreak detectors, or any other devicethat provides N.O. or N.C. output.The MCT-100 inputs can be configured asN.O., N.C. or E.O.L. resistor.
MCT-302Magnetic ContactThe MCT-302 is one of the smallestwireless magnetic contacts in the industry.It features a built-in reed switch and an auxiliary hardwired input,programmable as either N.C. or N.O. with an End-of-Line (E.O.L.)resistor. The auxiliary input can be used with additional products,such as pushbuttons, detectors, magnetic contacts and more. AnLED lights during transmission, whenever alarm or tamper signalsare reported.
MCT-231/ MCT-231WP (Waterproof)Small and compact pendant/keychain-style transmitters fit easily into a pocketor on a necklace. Both provideCode-Secure™ technology and will reportlow battery signals to the receiver .
MCT-131
MCT-132
MCT-134
MCT-423 Smoke DetectorThe MCT-423 is a low current smokedetector that uses advanced photoelectrictechnology to detect smoke or fire. Uponsmoke detection, the MCT-423 initiatesan audible sound and sends an RFtransmission.
MCT-131, MCT-132 andMCT-134 TransmittersMCT series handheldtransmitters provide Code-Secure™ technology and areavailable in one, two and four-button configurations. A long-life lithium battery is includedwith each transmitter, and lowbattery signals are reported tothe receiver.
MCT-211 Wristband TransmitterA waterproof wristband transmitter isthe perfect solution for personalemergency signaling when thetransmitter needs to be within easy reachat all times.
Mobile transmitters
Stationary transmitters & detectorsStationary transmitters provide low battery supervision and arepowered by a long-life 3.6 V lithium battery. A supervisory signalis sent every 60 minutes to ensurethat the transmitters are in placeand operational.
K-940 MCW Wireless Pet Immune DetectorThe K-940 MCW offers similar featuresas the MCPIR-3000, and provides petimmunity for animals up to 18 kg (40 lb).
RL-8 Output AdapterThe RL-8 is an "open collector-to-dry
contact" adapter, designed to serve as aninterface unit between the outputs of the
MCR-308 and alarm control panels thatrequire dry contact zone inputs.
The reliability of Supervision
Visonic Ltd’s fully supervised fixed and handheld transmitters are wireless
signaling devices designed for integration with alarm systems. An hourly
Supervision Message informs the receiver of an active presence of a
transmitter in the system and its status. In case of an alarm, a message
is transmitted to the receiver along with the ID of the alarm device.
For increased system reliability, improved maintenance and enhanced
trouble detection capability, Visonic Ltd’s
fully supervised transmitters lead
the way.Expanders
Receivers
Easy Learn ModeCoding transmitters is a quick and easy operation. Simply set the receiverto the "learn" mode, and send a transmission to the receiver. The receiverwill provide both visual and audible feedback upon successful enrollmentof the transmitter into the system.The receiver uses a non-volatile EEPROM memory. In the unlikely event
of power loss, all programming information will be retained.
MCR-304 ReceiverThe MCR-304 is a superheterodyne UHF receiver designed for smallersystems. The MCR-304 provides a one zone (N.O./N.C.) output andthree reporting outputs (tamper, low battery and inactivity). Up to tentransmitters can be assigned to the alarm output. The MCR-304 "learns"the ID of selected transmitters and will provide visual feedback uponsuccessful enrollment of the transmitter(s) into the system.
The MCR-308 converts hardwired alarm control panelsinto a fully supervised wireless system.
MCX-600 ExpanderThis module is a microprocessor-controlled wireless repeater, designedto relay digital data between wireless PowerCode™ transmitters and atarget PowerCode™ receiver. If the distance between the transmitters andthe target receiver is too large to be covered by one repeater, severalauxiliary repeaters may be added along the communication path. This way,a multi-level network is created. Up to 16 repeaters can be added to thesystems. The MCX-600 is not compatible with Code-Secure™ devices.
WIRELESSPOWERCODE™TRANSMITTERSAND DETECTORS(UP TO 4 UNITSPER OUTPUT)
MCR-308 RECEIVERHARDWIREDCONTROL PANEL
• Supervised versions
MCT-101, MCT-102, and
MCT-104 available
Product Description Power Supply CurrentConsumption
TypeBatterySupervision
Stationary transmitters & detectors
Mobile transmitters
K-940MCWPet Immune Detector
MCT-100Universal Transmitter
MCT-423Smoke Detector
MCT-302Magnetic Contact
MCT-231MCT-231 WPPendant-Style Transmitters
MCT-134Four-Button HandheldTransmitter
Visonic Ltd fully supervisedwireless components are supportedby every control panel on the market. Innovation and quality are built into everyVisonic Ltd product. Code-Secure™ and Anti-Collision technologies combined withextra long-life batteries ensure signal integrity, reliability, and performance thatcannot be matched.
MCT-211WaterproofWristband-StyleTransmitter
MCR-308Four-Zone Receiver
MCR-304One-Zone Receiver
Receivers
MCR-308 Four-Zone Receiver White 108 x 165 x 38 mm(4-1/4 x 6-1/2 x 1-1/2 in.)
Receivers10.5-16 VDC 45 mA Supervised and
Code-Secure™MCR-304 One-Zone Receiver White 110 x 63 x 25 mm
(4-5/16 x 2-1/2 x 1 in.)12 VDC 32 mA Supervised and
Code-Secure™
MCPIR-3000 Passive Infrared Automatic White 104 x 60 x 32 mm(2.4 x 4.1 x 1.3 in.)
Wireless Detectors3.6 V lithium battery 15 µA standby
9.5 mA operation
MCT-423 Smoke Detector Automatic9 V alkaline battery White 140 x 50 mm(5-1/2 x 2 in.)
Supervised
30 µA standby20 mA operation
Supervised
K-940 MCW Pet Immune PIR Automatic White 104 x 60 x 32 mm(4-1/10 x 2-2/5 x 1-1/3 in.)
3.6 V lithium battery 15 µA standby9.5 mA operation
Supervised
Accessories
MCX-8 8 Zone Expander 12 VDC n/a White 108 x 165 x 38 mm(4-1/4 x 6-1/2 x 1-1/2 in.)
MCX-600 Repeater / Range Expander 13-20 VDC, or11-16 VAC, 100 mA min
Supervised only White 110 x 63 x 25 mm(4-5/16 x 2-1/2 x 1 in.)
5 mA per relayRL-8 8 Relay Output Adapter 10.5-16 VDC 96 x 67 x 15 mm(3-5/8 x 2-5/8 x 19/32 in.)
Gray
Pendant-Style Transmitters
3 V alkaline batteryMCT-231 One-Button 0.1 µA standby6 mA operation
Code-Secure™Manual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
MCT-201 Gray 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
12 V alkaline batteryOne-Button 0 at standby6 mA operation
Non-supervisedManual
Waterproof Pendant-Style Transmitters
MCT-231WP One-Button 3 V alkaline battery 0.1 µA standby6 mA operation
Code-Secure™ GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
PCB only
W I R E L E S S
PowerCode™ Wireless
Visonic Ltd reserves the right to change specifications without prior notice. Fullwarranty statement available upon request.
Color Dimensions
Handheld Transmitters
MCT-201WP One-Button 12 V alkaline battery 6 mA operation Non-supervised GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
MCT-201AT Sealed Waterproof 3 V lithium battery 1 µA standby9 mA operation
Non-supervised GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
Waterproof Wristband-Style Transmitter
MCT-211 One-Button 3 V lithium battery 4.5 mA operation Non-supervised Black ø 35 mm (1.4 in.)Manual
Universal & Magnetic Contact Transmitters
MCT-100 Universal Transmitter 3.6 V lithium battery 5 µA standby8 mA operation
Supervised WhiteAutomatic 110 x 63 x 25 mm(4-5/16 x 2-1/2 x 1 in.)
MCT-302 Magnetic ContactTransmitter
3.6 V lithium battery 5 µA standby8 mA operation
Supervised WhiteAutomatic 81 x 22 x 23.5 mm(3-3/16 x 7/8 x 15/16 in.)
*Models with inactivity supervision must remain within the range of the receiver atall times for proper operation.
Note: Operating Temperatures 0° - 49° C (32° - 120° F)
Committed to Advancing Security
Fully supervised wirelesssystem
�
�
�
�
Long-life lithium battery included
Extended communication range
Anti-collision signaling
Waterproof products
Easy to install and operate
16 million different code combinations
�
�
PowerCode™ Wireless
WIR
EL
ES
S
105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
MCT-101* One-Button 3.6 V lithium battery 1 µA standby6 mA operation
Supervised (selectable) GrayManual
MCT-102* 1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Two-Button 3.6 V lithium battery Supervised (selectable)Manual
MCT-104* 1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Four-Button 3.6 V lithium battery Supervised (selectable)Manual
MCT-131 One-Button 3.6 V lithium battery 0.1 µA standby6 mA operation
Code-Secure™ Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Manual
MCT-132 0.1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Two-Button 3.6 V lithium battery Code-Secure™Manual
MCT-134 0.1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Four-Button 3.6 V lithium battery Code-Secure™Manual
�
�
�
�
�
Features
Code-Secure™ technology
Fully supervised
Attractive, elegant design
Reporting of tamper
and RF signal jamming
Transmitter inactivity and
low battery indication
SIISO 9000
Th
eS
t an d a r d s I n s t i t u t i o n
o fI s
r ae
l
Quali
ty
A s s u r ed
Firm
Head Office (Israel): Tel (972-3) 645-6789, Fax (972-3) 645-6788Visonic Inc. (U.S.A.): Tel (1-860) 243-0833, (1-800) 223-0020, Fax (1-860) 242-8094Visonic Ltd (U.K.): Tel (44-1767) 600857, Fax (44-1767) 601098Visonic Iberica (Spain): Tel (34-91) 4134575, Fax (34) 91 4134597Visonic GmbH (Germany): Tel (49-2173) 32422, Fax (49-2173) 32416Visonic Ltda (Latin America): Tel (598-2) 707-6170, Fax (598-2) 707-6169Visonic Ltd Representative Office (Singapore): Tel (65) 832-5090, Fax (65) 832-5091I n t e r n e t W e b s i t e : w w w. v i s o n i c . c o m
© V
ISO
NIC
LT
D. 1
999
PO
WE
RC
OD
E C
-225
0-9
(R
EV.
6/9
9)
Product Description Power Supply CurrentConsumption
TypeBatterySupervision
Stationary transmitters & detectors
Mobile transmitters
K-940MCWPet Immune Detector
MCT-100Universal Transmitter
MCT-423Smoke Detector
MCT-302Magnetic Contact
MCT-231MCT-231 WPPendant-Style Transmitters
MCT-134Four-Button HandheldTransmitter
Visonic Ltd fully supervisedwireless components are supportedby every control panel on the market. Innovation and quality are built into everyVisonic Ltd product. Code-Secure™ and Anti-Collision technologies combined withextra long-life batteries ensure signal integrity, reliability, and performance thatcannot be matched.
MCT-211WaterproofWristband-StyleTransmitter
MCR-308Four-Zone Receiver
MCR-304One-Zone Receiver
Receivers
MCR-308 Four-Zone Receiver White 108 x 165 x 38 mm(4-1/4 x 6-1/2 x 1-1/2 in.)
Receivers10.5-16 VDC 45 mA Supervised and
Code-Secure™MCR-304 One-Zone Receiver White 110 x 63 x 25 mm
(4-5/16 x 2-1/2 x 1 in.)12 VDC 32 mA Supervised and
Code-Secure™
MCPIR-3000 Passive Infrared Automatic White 104 x 60 x 32 mm(2.4 x 4.1 x 1.3 in.)
Wireless Detectors3.6 V lithium battery 15 µA standby
9.5 mA operation
MCT-423 Smoke Detector Automatic9 V alkaline battery White 140 x 50 mm(5-1/2 x 2 in.)
Supervised
30 µA standby20 mA operation
Supervised
K-940 MCW Pet Immune PIR Automatic White 104 x 60 x 32 mm(4-1/10 x 2-2/5 x 1-1/3 in.)
3.6 V lithium battery 15 µA standby9.5 mA operation
Supervised
Accessories
MCX-8 8 Zone Expander 12 VDC n/a White 108 x 165 x 38 mm(4-1/4 x 6-1/2 x 1-1/2 in.)
MCX-600 Repeater / Range Expander 13-20 VDC, or11-16 VAC, 100 mA min
Supervised only White 110 x 63 x 25 mm(4-5/16 x 2-1/2 x 1 in.)
5 mA per relayRL-8 8 Relay Output Adapter 10.5-16 VDC 96 x 67 x 15 mm(3-5/8 x 2-5/8 x 19/32 in.)
Gray
Pendant-Style Transmitters
3 V alkaline batteryMCT-231 One-Button 0.1 µA standby6 mA operation
Code-Secure™Manual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
MCT-201 Gray 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
12 V alkaline batteryOne-Button 0 at standby6 mA operation
Non-supervisedManual
Waterproof Pendant-Style Transmitters
MCT-231WP One-Button 3 V alkaline battery 0.1 µA standby6 mA operation
Code-Secure™ GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
PCB only
W I R E L E S S
PowerCode™ Wireless
Visonic Ltd reserves the right to change specifications without prior notice. Fullwarranty statement available upon request.
Color Dimensions
Handheld Transmitters
MCT-201WP One-Button 12 V alkaline battery 6 mA operation Non-supervised GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
MCT-201AT Sealed Waterproof 3 V lithium battery 1 µA standby9 mA operation
Non-supervised GrayManual 32 x 53 x 17 mm(1-1/4 x 2-1/8 x 11/16 in.)
Waterproof Wristband-Style Transmitter
MCT-211 One-Button 3 V lithium battery 4.5 mA operation Non-supervised Black ø 35 mm (1.4 in.)Manual
Universal & Magnetic Contact Transmitters
MCT-100 Universal Transmitter 3.6 V lithium battery 5 µA standby8 mA operation
Supervised WhiteAutomatic 110 x 63 x 25 mm(4-5/16 x 2-1/2 x 1 in.)
MCT-302 Magnetic ContactTransmitter
3.6 V lithium battery 5 µA standby8 mA operation
Supervised WhiteAutomatic 81 x 22 x 23.5 mm(3-3/16 x 7/8 x 15/16 in.)
*Models with inactivity supervision must remain within the range of the receiver atall times for proper operation.
Note: Operating Temperatures 0° - 49° C (32° - 120° F)
Committed to Advancing Security
Fully supervised wirelesssystem
�
�
�
�
Long-life lithium battery included
Extended communication range
Anti-collision signaling
Waterproof products
Easy to install and operate
16 million different code combinations
�
�
PowerCode™ Wireless
WIR
EL
ES
S
105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
MCT-101* One-Button 3.6 V lithium battery 1 µA standby6 mA operation
Supervised (selectable) GrayManual
MCT-102* 1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Two-Button 3.6 V lithium battery Supervised (selectable)Manual
MCT-104* 1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Four-Button 3.6 V lithium battery Supervised (selectable)Manual
MCT-131 One-Button 3.6 V lithium battery 0.1 µA standby6 mA operation
Code-Secure™ Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Manual
MCT-132 0.1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Two-Button 3.6 V lithium battery Code-Secure™Manual
MCT-134 0.1 µA standby6 mA operation
Gray 105 x 45 x 26 mm(4-1/8 x 1-3/4 x 1 in.)
Four-Button 3.6 V lithium battery Code-Secure™Manual
�
�
�
�
�
Features
Code-Secure™ technology
Fully supervised
Attractive, elegant design
Reporting of tamper
and RF signal jamming
Transmitter inactivity and
low battery indication
SIISO 9000
Th
eS
t an d a r d s I n s t i t u t i o n
o fI s
r ae
l
Quali
ty
A s s u r ed
Firm
Head Office (Israel): Tel (972-3) 645-6789, Fax (972-3) 645-6788Visonic Inc. (U.S.A.): Tel (1-860) 243-0833, (1-800) 223-0020, Fax (1-860) 242-8094Visonic Ltd (U.K.): Tel (44-1767) 600857, Fax (44-1767) 601098Visonic Iberica (Spain): Tel (34-91) 4134575, Fax (34) 91 4134597Visonic GmbH (Germany): Tel (49-2173) 32422, Fax (49-2173) 32416Visonic Ltda (Latin America): Tel (598-2) 707-6170, Fax (598-2) 707-6169Visonic Ltd Representative Office (Singapore): Tel (65) 832-5090, Fax (65) 832-5091I n t e r n e t W e b s i t e : w w w. v i s o n i c . c o m
© V
ISO
NIC
LT
D. 1
999
PO
WE
RC
OD
E C
-225
0-9
(R
EV.
6/9
9)