ÇÁ x ÁÁÁ · 2021. 6. 25. · 404gp, fanmig 404wp & fanmig 504wp versions. other various...
TRANSCRIPT
© Copyright RYWAL-RHC2
www.most.com.pl
3
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
CONTENTS
IWELDING
EQUIPMENT AND ACCESSORIES
1. MIG/MAG equipment and torches 41.1. MIG/MAG equipment 41.2. MIG/MAG torches 7
2. TIG equipment and torches 192.1. TIG equipment 192.2. TIG welding torches 21
3. MMA equipment and torches 293.1 MMA equipment 293.2. MMA electrode holders 31
4. Plasma cutting equipment 324.1. Plasma cutter 32
5. Welding generators 346. Welding accessories 357. Ceramic backings 37
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
1. MIG/MAG equipment and torches © Copyright RYWAL-RHC4
www.most.com.pl
1. MIG/MAG EQUIPMENT AND TORCHES1.1. MIG/MAG equipment
MOST Inverter semi-automatic welding machines from series FANMIGFANMIG 175i
■ Fanmig 175i is the smallest in the family of semi-automatic welding machines MOST, and the first inverter device among them. Allows together with MAG welding to weld with electrode MMA and TIG. Small size and weight make it ideal for repair work, not just for handyman. Fanmig 175i is inverter type semi-automat welding unit dedicated for MIG welding in gas shield, MMA (Stick) welding with coated electrode or Lift TIG welding (Arc ignition by HF). It is a compact unit in which two-roll wire feeder and power source are located in one cover. The device has excellent welding parameters and a wide range of application. It can be used for:* MIG / MAG (synergistic/welding)Used for welding of carbon steel or stainless steel with recommended wire diameters from 0.6 mm to 1.0 mm. Wire feed speed can be set from 2 up to 12 m/min., welding current has stepless (fluent) regulation.The wire feeder is dedicated for spools 5 kg or 1 kg, basket spools require an additional adapter.* MMA electrode weldingRecommended electrode diameter from 2.0 to 3.25 mm, 4.0 mm sporadically. Electrodes with rutile or basic coating (open circuit voltage U = 56V), used for carbon steel or stainless steel.* Lift TIG (DC) weldingArc ignitron by HF, the gas valve opens on the torch handle. For welding stainless or carbon steel, recommended diameter of tungsten electrode 1.6 or 2.4 mm.
Technical data
FANMIG 175iMain voltage 1x230 V 50/60 HzMaximal power consumption 28 AEffective Power 20 APower factor 0,73Power 6,4 kVAOpen circuit voltage U0 56 VRange of welding current● MMA● TIG● MIG
20–175 A10-175 A50-175 A
At duty cycle:● MIG
● MMA
● TIG
175 A/22,8 V /35%135 A/20,7 V /60%
103 A/19,2 V /100%
175 A/25%113 A/60%87 A/100%
175 A/35%135 A/60%
103 A/100%Welding power regulation Steeples/fluentProtection class IP 23SWire feed speed 2-12 m/minWire feeder 2-rollsWire diameters steel 0,6–0,8-1,0 mmSpool wire 5 kgWeight 12,8 kgDimensions (LxWxH) 420x220x439 mmCatalogue No. 51 00 020150
1
2
3
6
5
4
1 — Choosing of welding method MMA/LIFT TIG/MIG 2 — Controlling of wire speed3 — VRD/2-T/4-T switch key 4 — Data selection key (effective under MIG mode) 5 — Multifunctional data adjusting knob (coarse adjustment by
pressing the knob and turning it) 6 — Multifunctional data display
Simple Control Panel with display:
Recommended accessories:Torch MIG/MAG M15 SGRIP, M25 SGRIPTorch TIG 17V (F175) 4 m: 56 03 011110Welding trolley WUS-150 MOST: 50 03 003900
51. MIG/MAG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
MOST semi-automatic welding machinesFANMIG 1701 AND 1701E
■ Easy to use and operate welding units. Although semi-automatic Fanmig 1701 and 1701E MOST are the simplest in the range, their results and welding parame-ters will be appreciated by professionalists.
Main functions of Fanmig 1701 and 1701E MOST:● Switchable power supply 3x400 V or 1x230 V● Suitable for carbon alloy steel welding with Ø 0.6 and Ø 0.8 mm wire● Step regulation of welding current● Fluent regulation of wire feeding● Earth cable plugged to the equipment as well as typical welding torch
(FANMIG 1701) installed euro socket torch (FANMIG 1701E)● 2-rolls wire feed mechanism with FANMIG rolls 22/30 ● Coppered main transformer● Thermal control and fan● Space for gas bottle● User’s manual with Declaration of Conformity CE● Modern design
Technical data
FANMIG 1701 FANMIG 1701E
Welding torch LG140G/2,5 m Euro socket recommended M15 SGRIP 3 m
Main voltage 1x230 V / 3x400 V 1x230 V / 3x400 VFrequency 50 Hz 50 HzInput Current at 60% Duty Cycle 31 A 18 AMax. electricity consumption 7,0 kVA 7,0 kVAPower factor at rated load 0,92 0,92Welding current:● At x10% duty cycle● At x60% duty cycle● At x100% duty cycle
160 A80 A60 A
160 A80 A60 A
Welding current 40-160 A 40-160 ANo-loaded output voltage level 16-36 V 21-36 VWelding range setting No. 4 4Feeding speed 1 - 17 m/min 1 - 17 m/minWire diameters 0,6 - 0,8 mm 0,6 - 0,8 mmProtection class IP23 IP23Insulation class H HWorking temperature range -10 do +40°C -10 do +40°CPermissible relative humidity (t=20°C) ≤90% ≤90%Weight 50 kg 50 kgDimensions (without torch) LxWxH 427x635x815 mm 427x635x815 mmCatalogue No. 51 00 020171 51 00 020175
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
1. MIG/MAG equipment and torches © Copyright RYWAL-RHC6
www.most.com.pl
Most semi-automatic welding machines (main voltage 3x400 V)FANMIG IV ■ MOST proudly presents a series of professional semi-automatic welding machines Fanmig IV MOST designed for industry and crafts. As a result of many tests conducted on selected machines a number of modifications have been made. Upgraded machines are therefore produced under the MOST brand to satisfy both our and customers specific demands. Machines are designed for welding of carbon, stainless steel and aluminum (after retooling the welding torch and feeder). Transformer windings are made of cooper and therefore provide high welding quality. They all have built-in fans for cooling and thermal switches protecting the equipment against overloading. The devices have been equipped with three different kinds of latest technology control panels BASIC, MINOR and SYNERGY.
Functions available with BASIC control panel (model FANMIG 200-2):● Step regulation of welding current● Fluent regulation of wire feeding● Continuous welding, spot and internal welding● 2 or 4 rolls wire feed mechanisms
Functions available with MINOR control panel:● Continuous welding, spot and internal welding● Digital display● 2 or 4 rolls wire feed mechanisms● Values for starting (speed of wire, gas pre-flow / gas past-flow and wire burning-off time) are to
be set by manufacturer according to specific customers demands● Adjustment for gas flow and feeding of wire from a new spool● All the above mentioned settings can be set on a singular knob on the control panel
Functions available with SYNERGY also include:● 9 synergic programs for steel welding (program setting according to welding current A, wire fe-
eding speed m/min or material thickness)● Digital displays of welding current A+V with HOLD function provide values of all adjustable
parameters
FANMIG 504WP SYNERGY
Technical data
FANMIG200-2BASIC
FANMIG280-2NMINOR
FANMIG280-4NMINOR
FANMIG320-4NMINOR
FANMIG400-4N
SYNERGY
FANMIG404GP
SYNERGY
FANMIG404WP
SYNERGY
FANMIG504WP
SYNERGYMain voltage 3x400 V 3x400 V 3x400 V 3x400 V 3x400 V 3x400 V 3x400 V 3x400 V
Fuse 10 A 16 A 16 A 25 A 32 A 32 A 32 A 32 A
Range of welding current 60-180 A 40-290 A 40-290 A 40-340 A 40-400 A 40-400 A 40-400 A 60-530 AHigh duty cycle 40% 30% 30% 25% 25% 30% 30% 25%Welding range:● at 60% duty cycle● at 100% duty cycle
150 A130 A
210 A170 A
210 A170 A
230 A200 A
290 A240 A
320 A260 A
320 A260 A
390 A330 A
Welding range settings no. 7 10 10 12 20 20 20 30Protection class IP 23S IP 23S IP 23S IP 23S IP 23S IP 23S IP 23S IP 23S
Wire feeder 2 - rolls 2 - rolls 4 - rolls 4 - rolls 4 - rolls 4 - rollsseparated
4 - rollsseparated
4 - rollsseparated
Feeding speed 1-19 m/min 1-19 m/min 1-19 m/min 1-19 m/min 1-19 m/min 1-25 m/min 1-25 m/min 1-25 m/minWire diameters:● steel● stainless steel● aluminium
0,6 - 1,0 mm0,6 - 1,0 mm
-
0,8 - 1,0 mm0,8 - 1,0 mm
-
0,8 - 1,0 mm0,8 - 1,0 mm1,0 - 1,2 mm
0,8 - 1,2 mm0,8 - 1,2 mm1,0 - 1,2 mm
0,8 - 1,2 mm0,8 - 1,2 mm1,0 - 1,2 mm
0,8 - 1,2 mm0,8 - 1,2 mm1,0 - 1,2 mm
0,8 - 1,2 mm0,8 - 1,2 mm1,0 - 1,2 mm
0,8 - 1,6 mm0,8 - 1,2 mm1,0 - 1,2 mm
Weight 61 kg 88 kg 88 kg 99 kg 109 kg 106 + 18 kg 126 + 18 kg 161 + 18 kg
Dimensions LxWxH (mm) 474x888x561 500x868x806 500x868x806 500x868x806 500x868x806607x873x803
feeder245x700x450
607x873x803feeder
245x700x450
875x572x874feeder
245x700x450Catalogue No. 51 00 022200 51 00 022290 51 00 022294 51 00 022334 51 00 022420 51 00 023414 51 00 023424 51 00 023504
Delivery includes earth cables and a power-supply cable (3m). The cables connect the power source and the feeder (5m) supplied with Fanmig 404GP, Fanmig 404WP & Fanmig 504WP versions. Other various leng-ths of cable are available on request. We also offer standard welding torches designed for Fanmig machines. Available cable lengths are 3m, 4m and 5m.
Main functions of FANMIG IV semi-automatic welding machines:● Compact machines with built-in or separated wire feeder (FANMIG
404GP, Fanmig 404WP and FANMIG 504WP)● 2 or 4 rolls wire feeding systems● 3x400V main voltage● Water cooled (WP models) or air cooled● Enables welding with solid and fluxed-cored wires, argon or gasmi-
xture shield● Standard cable length (source – feeder) 5m (extended up to 20m
available on request)● Euro-sockets suitable for any welding torches● Ergonomic design, front panel integrated with carrying handle● One of front wheels includes a brake (except FANMIG 200-2 BASIC)● Fanmig MOST machines have 2 years guarantee from the date of
purchase
Range models:● FANMIG 200-2 BASIC: M15 or M25 MOST● FANMIG 280-2, 280-4 MINOR:M24 or M25 MOST● FANMIG 320-4 MINOR, 400-4 SYNERGY: M24 or M36 MOST● FANMIG 404GP:M36 MOST● FANMIG 404WP, 504WP SYNERGY: M401 or M501 MOST● FANMIG 404WP, 504WP SYNERGY: M401 or M501 MOST
71. MIG/MAG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
No. Name Catalogue No.
A
Cylindrical nozzle Ø16 55 12 300885
Conical nozzle* 55 12 300890
Tapered nozzle Ø9,5 55 12 300880
Gas spot welding nozzle 55 12 300882
1 Spring* 55 13 008340
2 Tip adaptor* 55 13 003750
3 Swan neck M-15 complete 55 13 014059
3.1 Swan neck M-15 without nozzle and tip 55 13 014060
4 Hexagonal fitting, brass 55 13 003760
5 Handle location body 55 13 013258
6 Lock nut M10x1 55 13 004309
7 MOST Cable support M15/25 UG8015 55 13 006834
8 MOST Hanger hook UB 2517 55 13 006836
9 MOST Handle nut UG8008 55 13 006837
10 Cable assembly 3 m 55 13 016003
10.1 Cable assembly 4 m 55 13 016004
10.2 Cable assembly 5 m 55 13 016005
11 MOST Handle kit M Grip UG2514/KJ/B 55 13 006515
12 MOST Handle trigger M15/501 B2516 55 13 006516
13 MOST Cable support Uc2841 M15/25 55 13 006835
14 MOST Gun plug body housing M15/36 Uc1518 55 13 006518
15 MOST Euro connector nut M15/501 Uc1519 55 13 006519
16 MOST Gun plug body / Spring pins 55 13 013252
17 Gun plug O-ring 4x1 55 13 013962
18 Liner nut 55 13 004300
B Contact tip (see table page 17)
C Steel liner (see table page 17)
Type M 15 SGRIP
Cooling Gas
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 180 A CO₂150 A mix gas M21
Diameter of wire 0,6 - 1,0 mm
Length Catalogue No.
3,0 m 55 08 301530
4,0 m 55 08 301540
5,0 m 55 08 301550
*) standard version
1.2. MIG/MAG torches
M15 SGRIP 6 5 4 3
A
B
2
1
10 11
12
8
13
15 16 18
C17146
7
9
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
1. MIG/MAG equipment and torches © Copyright RYWAL-RHC8
www.most.com.pl
M15+ MOST
No. Name Catalogue No.
A
Cylindrical nozzle Ø16 55 12 300885
Conical nozzle* 55 12 300890
Tapered nozzle. Ø9,5 55 12 300880
Gas spot welding nozzle 55 12 300882
1 Spring* 55 13 008340
2 Tip adaptor * 55 13 003750
3 Swan neck M-15 55 13 014059
3.1 Swan nech M-15 without nozzle and tip 55 13 014060
4 Hexagonal fitting, brass 55 13 003760
5 MOST handle location body 55 13 013258
6 MOST+ Handle trigger M15/501 58 000044 55 13 006962
7 MOST+ Handle kit with ball joint M15/501 55 13 018000
8 MOST+ Cable support M15/24/25 58/000048 55 13 006844
9
Cable assembly 3 m 55 13 016003
Cable assembly 4 m 55 13 016004
Cable assembly 5 m 55 13 016005
10 Most + Gun plug housing for euro connector M15/36 58/000049 55 13 006982
11 Most +Gun plug nut for euro connector M15/501 58/000024 55 13 006983
12 Most + Gun plug body / Spring pins M15/36 58/000050 55 13 006980
13 Linear nut 55 13 004300
B Contact tips (see in the page 17)
C Steel liner (see table page 17)
Type M 15+ MOST
Cooling Gas
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 180 A CO₂150 A mix gas M21
Diameter of wire 0,6 - 1,0 mm
Length Catalogue No.
3,0 m 55 08 101530
4,0 m 55 08 101540
5,0 m 55 08 101550
*) standard version
91. MIG/MAG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
M24 SGRIP
No. Name Catalogue No.
A
Cylindrical nozzle 17x63,5 55 12 300897
Conical nozzle12,5x63,5* 55 12 300895
Tapered nozzle 10x63,5 55 12 300896
1 Tip adaptor M6* 55 13 009460
2 Diffuser ceramic M-24* 55 13 009465
2.1 Diffuser white M-24 55 13 014063
3 Swan neck M24 55 13 013258
4 Handle location body 55 13 004309
5 Lock nut M10x1 55 13 006834
6 MOST Cable support M15/25 UG8015 55 13 006837
7 MOST Handle lock nut UG8008 55 13 016023
8 Cable assembly M24 3 m 55 13 016024
8.1 Cable assembly M24 4 m 55 13 016025
8.2 Cable assembly M24 5 m 55 13 006515
9 MOST Handle kit M Grip UG2514/KJ/B 55 13 006836
10 MOST Hanger hook UB 2517 55 13 006516
11 MOST Handle trigger M15/501 B2516 55 13 006835
12 MOST Cable support M15/25 Uc2841 55 13 006518
13 MOST Plug body housing M15/36 Uc1518 55 13 006519
14 MOST Plug nut M15/25 Uc1519 55 13 013252
15 MOST Gun plug body / Spring pins 55 13 013962
16 Gun plug O-ring 4x1 55 13 004300
17 Liner nut
B Contact tip (see table page 17)
C Steel liner (see table page 17)
Type M 24 SGRIP
Cooling Gas
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 250 A CO₂220 A mix gas M21
Diameter of wire 0,8 - 1,2 mm
Length Catalogue No.
3,0 m 55 08 302430
4,0 m 55 08 302440
5,0 m 55 08 302450
6 5 4 3
A
B
2
1
8 9
11
10
12
14 15
16135
7
17
C
*) standard version
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
1. MIG/MAG equipment and torches © Copyright RYWAL-RHC10
www.most.com.pl
M24+ MOST
No. Name Catalogue No.
A
Cylindrical nozzle 17x63,5 55 12 300897
Conical nozzle 1212,5x63,5* 55 12 300895
Tapered nozzle 10x63,5 55 12 300896
1 Tip adaptor M6* 55 13 003800
2 Diffuser ceramic M-24* 55 13 009460
2.1 Diffuser white M-24 55 13 009465
3 Swan neck M24 55 13 014063
4 MOST+ Handle triggerM15/501 58/000044 55 13 006962
5 MOST+ Handle kit with ball joint M15/501 55 13 018000
6 MOST+ Cable support M15/24/25 58/000048 55 13 006844
7
Cable assembly M24 3 m 55 13 016023
Cable assembly M24 4 m 55 13 016024
Cable assembly M24 5 m 55 13 016025
8 MOST+ Gun plug housing for euro connector M15/36 58/000049 55 13 006982
9 MOST+ Gun plug nut for euro connector M15/501 58/000024 55 13 006983
10 MOST+ Gun plug body / Spring pins M15/36 58/000050 55 13 006980
11 Liner nut 55 13 004300
B Contact tips (see in the page 17)
C Steel liner (see table page 17)
Type M24+ MOST
Cooling Gas
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 250 A CO₂220 A mix gas M21
Diameter of wire 0,8 - 1,2 mm
Length Catalogue No.
3,0 m 55 08 102430
4,0 m 55 08 102440
5,0 m 55 08 102450
*) standard version
111. MIG/MAG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
M25 SGRIP
No. Name Catalogue No.
A
Cylindrical nozzle 55 12 300901
Conical nozzle 15x57* 55 12 300900
Tapered nozzle 11,5x57 55 12 300904
Spot welding nozzle 55 12 300903
1 Tip adaptor M25* 55 13 003804
2 Spring M25* 55 13 008360
3 Swan neck M-25 55 13 014070
3.1 Swan neck M-25 without nozzle and tip 55 13 014072
4 Handle location body 55 13 013258
5 Lock nut M10x1 55 13 004309
6 MOST Cable support M15/25 UG8015 55 13 006834
7 MOST Handle nut UG8008 55 13 006837
8 Cable assembly M24 3 m 55 13 016060
8.1 Cable assembly M24 4 m 55 13 016070
8.2 Cable assembly M24 5 m 55 13 016075
9 MOST Handle kit MS Grip UG 2514/KJ/B 55 13 006515
10 MOST Hanger hook UB2517 55 13 006836
11 MOST Handle trigger M15/501 B2516 55 13 006516
12 MOST Cable housing M15/25 Uc2841 55 13 006842
13 MOST Gun plug housing for euro connector M15/36 Uc1518 55 13 006518
14 MOST Gun plug nut for euro connector M15/25 Uc1519 55 13 006519
15 MOST Gun plug body / spring pins 55 13 013252
16 Gun plug O-ring 4x1 55 13 013962
17 Liner nut 55 13 004300
B Contact tip (see table page 17)
C Steel liner (see table page 17)
Type M 25 SGRIP
Cooling Gas
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 230 A CO₂200 A mix gas M21
Diameter of wire 0,8 - 1,2 mm
Length Catalogue No.
3,0 m 55 08 302530
4,0 m 55 08 302540
5,0 m 55 08 302550
6 5 4 3
A
B
2
1
8 9
11
10
12
14 15 17
C16135
*) standard version
7
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
1. MIG/MAG equipment and torches © Copyright RYWAL-RHC12
www.most.com.pl
M25+ MOST
No. Name Catalogue No.
A
Cylindrical nozzle 55 12 300901
Conical nozzle 15x57* 55 12 300900
Tapered nozzle 11,5x57 55 12 300904
Spot welding nozzle 55 12 300903
1 Tip adaptor M25* 55 13 003804
2 Spring M25* 55 13 008360
3 Swan neck M-25 55 13 014070
3.1 Swan neck M-25 without nozzle and tip 55 13 014072
4 MOST+ Handle location body 55 13 013258
5 MOST+ Handle trigger M15/501 58/000044 55 13 006962
6 MOST+ Handle kit with ball joint M15/501 55 13 018000
7 MOST+ Cable support M15/24/25 58/000048 55 13 006844
8
Cable assembly M24 3 m 55 13 016060
Cable assembly M24 4 m 55 13 016070
Cable assembly M24 5 m 55 13 016075
9 MOST+ Gun plug housing for euro connector M15/36 58/000049 55 13 006982
10 MOST+ Gun plug nut for euro connector M15/501 58/000024 55 13 006983
11 MOST+ Gun plug body / spring pins M15/36 58/000050 55 13 006980
12 Liner nut 55 13 004300
B Contact tips (see in the page 17)
C Steel liner (see table page 17)
Type M25+ MOST
Cooling Gas
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 230 A CO₂200 A mix gas M21
Diameter of wire 0,8 - 1,2 mm
Length Catalogue No.
3,0 m 55 08 102530
4,0 m 55 08 102540
5,0 m 55 08 102550
*) standard version
131. MIG/MAG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
M36 SGRIP
No. Name Catalogue No.
A
Cylindrical nozzle straight 19x84 55 12 300915
Conical nozzle 16x84* 55 12 300910
Tapered nozzle 12x84 55 12 300913
Spot welding nozzle 55 12 300917
1 Tip adapter M6x28* 55 13 003806
2 Tip adaptorM8x28 55 13 003816
3 Diffuser ceramic M-36* 55 13 009486
3.1 Diffuser white M-36 55 13 009485
4 MOST Swan neck M36 55 13 014080
5 MOST Handle location body 55 13 013258
6 MOST Lock nut M10x1 55 13 004309
7 MOST Cable support M36 UG8016 55 13 006832
8 MOST Handle nut UG8008 55 13 006837
9 Cable assembly M36 3 m 55 13 016083
9.1 Cable assembly M36 4 m 55 13 016084
9.2 Cable assembly M36 5 m 55 13 016085
10 MOST Handle kit MS Grip UG2514/KJ/B 55 13 006515
11 MOST Hanger hook UB2517 55 13 006836
12 MOST Handle trigger M15/501 B2516 55 13 006516
13 MOST Cable support M36 Uc3641 55 13 006833
15 MOST Gun plug housing for euro connector M15/36 Uc1518 55 13 006518
16 MOST Gun plug nut for euro connector M15/501 Uc1519 55 13 006519
17 MOST Gun plug body / spring pins 55 13 013252
18 Gun plug O-ring 4x1 55 13 013962
19 Liner nut 55 13 004300
B Contact tip (see table page 17)
C Steel liner (see table page 17)
Type M 36 SGRIP
Cooling Gas
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 300 A CO₂270 A mix gas M21
Diameter of wire 0,8 - 1,2 mm
Length Catalogue No.
3,0 m 55 08 303630
4,0 m 55 08 303640
5,0 m 55 08 303650
7 6 5 4
A
B
1
3
910
12
11
13
16 17 19
C18156
*) standard version
8
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
1. MIG/MAG equipment and torches © Copyright RYWAL-RHC14
www.most.com.pl
M36+ MOST
No. Name Catalogue No.
A
Cylindrical nozzle straight 19x84 55 12 300915
Conical nozzle 16x84* 55 12 300910
Tapered nozzle 12x84 55 12 300913
Spot welding nozzle 55 12 300917
1 Tip adaptor M6x28* 55 13 003806
1.1 Tip adaptorM8x28 55 13 003816
2 Diffuser ceramic M-36* 55 13 009486
2.1 Diffuser white M-36 55 13 009485
3 Swan neck M36 55 13 014080
4 MOST+ Handle trigger M15/501 58/000044 55 13 006962
5 MOST+ Handle kit with ball joint M15/501 55 13 018000
6 MOST+ Cable support M36 58/000063 55 13 006845
7
Cable assembly M36 3 m 55 13 016083
Cable assembly M36 4 m 55 13 016084
Cable assembly M36 5 m 55 13 016085
8 MOST+ Spring cable support M36 58/000078 55 13 006885
9 MOST+ Gun plug housing for euro connector M15/36 58/000049 55 13 006982
10 MOST+ Gun plug nut for euro connector M15/501 58/000024 55 13 006983
11 MOST+ Gun plug body / spring pins M15/36 58/000050 55 13 006980
12 Liner nut 55 13 004300
B Contact tips (see in the page 17)
C Steel liner (see table page 17)
Type M36+ MOST
Cooling Gas
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 300 A CO₂270 A mix gas M21
Diameter of wire 0,8 - 1,2 mm
Length Catalogue No.
3,0 m 55 08 103630
4,0 m 55 08 103640
5,0 m 55 08 103650
*) standard version
151. MIG/MAG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
M401 SGRIPM501 SGRIP
No. Name Catalogue No.
A
Cylindrical nozzle 20x76 55 13 000610
Conical nozzle 16x76* 55 13 000600
Tapered nozzle 14x76 55 13 000615
Spot welding nozzle 55 13 000613
1 Diffuser ceramic 401/501* 55 13 009493
1.1 Diffuser white 401/501 55 13 009491
2 Tip adaptor M401/501 M6x25 55 13 003991
2.1 Tip adaptor M401/501 M6x29 55 13 003993
2.2 Tip adaptor M401/501 M8x25* 55 13 003990
2.3 Tip adaptor M401/501 M8x29 55 13 003992
3 Insulating water M401/501 55 13 013966
4 Swan neck M401 SGrip NUG 4011 55 13 014086
5 Swan neck M501 SGrip NUG 5002 55 13 014096
6 Water hose clamp 9,5 50 15 000095
11 MOST Handle Lock Nut UG8008 55 13 006837
12 MOST Cable support 401/501 UG 3208 55 13 006831
13 MOST Handle kit MSGrip UG2514/KJ/B 55 13 006515
15 MOST Ball joint assembly 401/501 UG 8010 55 13 006839
16 MOST Handle trigger M15/501 B2516 55 13 006516
17 MOST Spring cable support M401/501 55 13 006827
18 MOST Cable support nut M36/501 55 13 006828
19 Water hose nipple fi 6 50 14 182003
20 Water outlet hose 5x15 51 13 007115
20.1 Water outlet hose 5x1,5 51 13 007120
21 MOST Gun plug housing M401/501 55 13 006522
22 MOST Gun plug nut insert M15/501 B1519 55 13 006519
23 MOST Gun plug body / spring fixed pins WZ-2 55 13 013250
24 Gun plug O-ring 4x1 55 13 013962
25 Liner nut 55 13 004300
26 MOST Hanger hook UB2517 55 13 006836
27 Red cap stopper UBD 80320 55 13 006838
28 Blue cap stopper UBD 80320 55 13 006840
B Contact tip (see table page 17)
C Steel liner (see table page 17)
Type M 401 SGRIP
Cooling Liquid
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 400 A CO₂300 A mix gas M21
Diameter of wire 0,8 - 1,6 mm
Length Catalogue No.
3,0 m 55 08 304013
4,0 m 55 08 304014
5,0 m 55 08 304015
Type M 501 SGRIP
Cooling Liquid
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 520 A CO₂420 A mix gas M21
Diameter of wire 0,8 - 1,6 mm
Length Catalogue No.
3,0 m 55 08 305013
4,0 m 55 08 305014
5,0 m 55 08 305015
No. Description 3,0 m 4,0 m 5,0 m7 Outer linter assembly 55 13 006503 55 13 006504 55 13 006505
8 Gas hose assembly 55 13 015370 (rm)
9 Water inlet hose assembly 5x1,5 51 13 007120 (rm)
10 Power cable assembly 55 13 015968 55 13 015969 55 13 015970
14 Cable assembly 55 13 015660 55 13 015661 55 13 015662
14.1 Cable assembly 55 13 015964 (rm)
*) standard version
A
B
1
569871512
1413
16
2611
2728
19 2017 21 22 6 23 24 C 25
4
3
2
18
10
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
1. MIG/MAG equipment and torches © Copyright RYWAL-RHC16
www.most.com.pl
M401+ MOSTM501+ MOST
No. Name Catalogue No.
A
Cylindrical nozzle 20x76 55 13 000610
Conical nozzle 16x76* 55 13 000600
Tapered nozzle 14x76 55 13 000615
Spot welding nozzle 55 13 000613
1 Diffuzer ceramic 401/501* 55 13 009493
1.1 Diffuser white 401/501 55 13 009491
2 Tip adapror M401/501 M6x25 55 13 003991
2.1 Tip adapror M401/501 M6x29 55 13 003993
2.2 Tip adapror M401/501 M8x25* 55 13 003990
2.3 Tip adapror M401/501 M8x29 55 13 003992
3 Swan neck M401 55 13 014085
3.1 Swan neck M501 55 13 014095
4 MOST+ Handle trigger M15/501 58/000044 55 13 006962
5 MOST+ Handle kit with ball joint M15/501 55 13 018000
6 Water hose clamp Ger 8,7 50 15 000087
7 Water hose lamp Ger 10,0 50 15 000100
14 MOST+ Spring cable support M401/501 58/000025 55 13 006886
15 MOST+ Water hose lamp (set) M401/501 58/000074 55 13 006888
16 Water outlet hose nipple fi 6 50 14 182003
17 Water outlet hose M401/501 58/000075 55 13 006984
18 MOST+ Gun plug housing assembly M401/501 58/000077 55 13 006887
19 MOST+ Gun plug nut M15/501 58/000024 51 13 006983
20 MOST+ Gun plug nut body / spring pins M401/501 58/000076 55 13 006981
21 Liner nut 55 13 004300
27 Red cap stopper UBD 80320 55 13 006838
28 Lue cap stopper UBD 80320 55 13 006840
B Contact tips (see in the page 17)
C Steel liner (see table page 17)
Type M401+ MOST
Cooling Liquid
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 400 A CO₂350 A mix gas M21
Diameter of wire 0,8 - 1,6 mm
Length Catalogue No.
3,0 m 55 08 104013
4,0 m 55 08 104014
5,0 m 55 08 104015
*) standard version
Type M501+ MOST
Cooling Liquid
Technical data according to EN 60 974-7
Max. Load At 60% duty cycle 520 A CO₂420 A mix gas M21
Diameter of wire 0,8 - 1,6 mm
Length Catalogue No.
3,0 m 55 08 105013
4,0 m 55 08 105014
5,0 m 55 08 105015
Lp. Description 3,0 m 4,0 m 5,0 m
8 Input cable assembly55 13 0015999 55 13 016000 55 13 016001
58/000068 58/000069 58/000070
9 Water inlet hose assembly 5x1,5 51 13 007120 (rm)
10 Power cable assembly55 13 015999 55 13 016000 55 13 016001
58/000008 58/000009 58/000010
11 Gas hose assembly 5513015370 (rm)
12 Cover assembly 55 13 006990 55 13 006991 55 13 006992
58/000071 58/000072 58/000073
13 Cable set5513006994 5513006995 5513006996
58/000066 58/000067
171. MIG/MAG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
Contact tips
TypeMOST M15,
MB-15,(M6 slim), M6x25
MOST M24/M25/M36, MB-24, MB-25, MB-36, MB-
240D(M6 thick), M6x28
MOST M401/M501,
MB-401D,MB-501DGRIP ALW
M8x30
Abimig 155MB 15
(M6 slim)M6x25
(No. Abicor Binzel)
Abimig 255 MB 24, MB 25, MB 36
MB-240D(M6 thick)
M6x28(No. Abicor Binzel)
Abimig 305/355/405 MB 401 DMB 501 DGRIP ALW
M8x30(No. Abicor Binzel)
0,6 mm 55 13 002150 - - 140.0008 - -
0,8 mm 55 13 002170 55 13 002180 55 13 002250 140.0059 140.0051 140.0114
1,0 mm 55 13 002320 55 13 002330 55 13 002340 140.0253 140.0242 140.03131,2 mm 55 13 002470 55 13 002480 55 13 002490 - 140.0379 140.04421,4 mm - 55 13 002610 55 13 002600 - - -1,6 mm 55 13 002720 55 13 002730 55 13 002800 - 140.0555 140.05870,6 mm CuCrZr 55 13 002151 - - 140.0855 - -0,8 mm CuCrZr 55 13 002171 55 13 002190 55 13 002251 140.0062 140.0054 140.01171,0 mm CuCrZr 55 13 002321 55 13 002331 55 13 002341 140.0256 140.0245 140.03161,2 mm CuCrZr 55 13 002473 55 13 002482 55 13 002491 - 140.0382 140.04451,4 mm CuCrZr - - 55 13 002602 - - 140.05361,6 mm CuCrZr 55 13 002725 55 13 002731 55 13 002801 - 140.0558 140.05900,8 mm al. 55 13 002172 55 13 002210 55 13 002253 141.0002 141.0001 141.00031,0 mm al. 55 13 002324 55 13 002335 55 13 002365 141.0007 141.0006 141.00081,2 mm al. 55 13 002475 55 13 002484 55 13 002493 - 141.0010 141.00151,6 mm al. 55 13 002726 55 13 002732 55 13 002808 - 141.0020 141.0022
Spare parts for welding torches MIG/MAG
Steel liners for welding torches MIG/MAG – spiral liners for steel wiresMOST M15/M24/M25/M36, MB-15AK, MB-24KD,
MB-25AK, MB-36KD, GRIP ALWMOST M401/M501, MB-240D, MB-401D, MB-501D
non - coatedDiameter 3,0 m 4,0 m 5,0 m 3,0 m 4,0 m 5,0 m
0,8 mm 55 13 012390* 55 13 012400* 55 13 012402* 55 13 012390 55 13 012400 55 13 012402
1,0 mm 55 13 012440** 55 13 012470** 55 13 012480** 55 13 012490 55 13 012500 55 13 012505
1,2 mm 55 13 012440** 55 13 012470** 55 13 012480** 55 13 012490 55 13 012500 55 13 0125051,6 mm 55 13 012510*** 55 13 012530*** 55 13 012541*** 55 13 012570 55 13 012573 55 13 012575
Colours*) blue**) red***) yellow
Steel liners for welding torches MIG/MAG – teflon liners for aluminium wiresMOST M15/M24/M25/M36, MB-15AK, MB-24KD,
MB-25AK, MB-36KD, GRIP ALW MOST M401/M501, MB-240D, MB-401D, MB-501D
Diameter 3,0 m 4,0 m 5,0 m 3,0 m 4,0 m 5,0 m0,8 mm 55 13 012120* 55 13 012170* 55 13 012175* 55 13 012120* 55 13 012170* 55 13 012175*
1,0 mm 55 13 012205** 55 13 012206** 55 13 012207** 55 13 012205** 55 13 012206** 55 13 012207**
1,2 mm 55 13 012205** 55 13 012206** 55 13 012207** 55 13 012205** 55 13 012206** 55 13 012207**1,6 mm 55 13 012210*** 55 13 012212*** 55 13 012214*** 55 13 012210*** 55 13 012212*** 55 13 012214***1,0 - 1,2 mm carbon-teflon-brass 55 13 013010 55 13 013020 55 13 013030 55 13 013010 55 13 013020 55 13 013030
Colours*) blue**) red***) yellow
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
1. MIG/MAG equipment and torches © Copyright RYWAL-RHC18
www.most.com.pl
Wire feeder rollers
Roller type: Fi 37 2R Fanmig II, Lorch M-ProDimension [mm]
Diameter 37
Inner diameter 10
Width 15 (17)
Producer Machine type
MOST Fanmig II: Fanmig 230 C-2Fanmig 271 C-2
Lorch LORCH M-Pro
Catalogue No. Wire diameter5113007802 0,8 – 1,0
5113007883 1,0 – 1,2
5113007803 0,8 – 1,0 Al
5113007884 1,0 - 1,2 Al
5113007797 0,6 - 0,8
Typ: Fi 30 Cooptim (Fanmig III, Bester)Dimension [mm]
Diameter 30
Inner diameter 22
Width 10
Producer Machine type
MOST (Alfa In) Fanmig III compakt, Fanmig 400/600
BesterSome of: Magster 250 4x4, 250T, 315T (TYP COOPTIM
CWF 4010)
Catalogue No. Wire diameter5113007783 0,6 - 0,8
5113007788 0,6 - 0,8 Al
5113007960 1,2 - 1,6 Al
5113007783 0,6 - 0,8
5113007826 0,8 - 1,0
5113007828 0,8 - 1,0 Al
5113007862 1,0 - 1,2
5113007863 1,0 - 1,2 AL
5113007956 1,2 - 1,6
5113007895 1,0 - 1,2 R
5113007899 1,2 - 1,4 R
Roller type: Fi 37 Powertec- Fanmig II-Ozas-Esab
Dimension [mm]Diameter 37
Inner diameter 19
Width 12
Producer Machine type
MOSTFanmig II: Fanmig 271 C-4,
Fanmig 351 C-4, Fanmig 351LWF I Fanmig 451WWF
Lincoln Electric
Powertec:1 roller: 200C, 250C, 300C, feeder LF 22; 2 rollers: 300C, 280Pro, 350Pro, 420Pro; PT 300,
360, 420 i 500 with exter-nal feeder, LF 24, 33
OZAS/ESAB
Minimag-241/341; Magomig with feeder ZP-22/30; Feeder ZP-30/20, OrigoMig; OrigoFeed 30
Catalogue No. Wire diameter5113007793 0,6 - 0,8
5113007808 0,8 - 1,0
5113007809 0,8 - 1,0 Al
5113007856 1,0 - 1,2R
5113007865 1,0 - 1,2
5113007885 1,0 - 1,2 Al
5113007928 1,2 Al
5113007931 1,2 - 1,6
5113007935 1,2 - 1,6 Al
5113007937 1,2 - 1,6R
Roller type: Fi 40 Cooptim (Bester), Fanmig 404/504/604
Dimension [mm]Diameter 40
Inner diameter 32
Width 10
Producer Machine type
Bester
Some of: Magster 350C, 450C, 500W;
All: Magster - 351W, 400 Plus/W, 500PlusW, 501W
(Type COOPTIM CWF 5110)
MOST (Alfa In) Fanmig 404/504/604
Catalogue No. Wire diameter5113007991 2,4 - 3,2 R
5113007787 0,6 - 0,8 Al
5113007792 0,6 - 0,8
5113007819 0,8 - 1,0
5113007830 0,8 - 1,0 Al
5113007879 1,0 - 1,2 Al
5113007866 1,0 - 1,2 R
5113007880 1,0 - 1,2
5113007971 1,2 - 1,6
5113007960 1,2 - 1,6 Al
5113007997 1,6 - 2,0 R
5113007999 1,6 - 2,0
Roller type: Fi 30 Lorch-Esab-OZAS-Bester-Fanmig I
Dimension [mm]Diameter 30
Inner diameter 40Width 12
Producer Machine type
MOSTFanmig I: Fanmig – 190 – 270 C2/C4 – 350 C4 –
350LWF I 450 WWF
Lorch Saprom, C-dialog, P
OZAS
Minimag 164-240-320, feeders ZP-10 – 11 – 12 – 15 – 20 (elder types),
Minimag 281
ESAB LKB-260-320-400, MEK2/4, ESAB Feed 30 and others
Bester
Some of: Magster 250 4x4, 250T, 315 4x4, 315T, 350C,
350W, 450C, 500 (Type Fortrans)
Catalogue No. Wire diameter5113007796 0,6 - 0,85113007805 0,8 Al5113007810 0,8 - 1,05113007811 1,0 Al5113007855 1,0/1,2 R – 1,4/1,6 R5113007860 1,0 - 1,25113007891 1,0/1,2 R5113007905 1,25113007918 1,2/1,4/1,6 R5113007925 1,2 Al5113007934 1,2 - 1,6 Al5113007930 1,2 - 1,65113007989 1,4/1,6 R5113007995 1,6 Al5113007998 2,05113007861 1,0 - 1,2 Al
192. TIG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
2. TIG EQUIPMENT AND TORCHES2.1. TIG equipment
Inverter equipment MOSTPONTIG 1880 HF PONTIG 220 HF PRO
■ PONTIG 1880 HF and PONTIG 2220 HF PRO are machines designed for TIG DC welding in argon shield (steel and stainless steel) or coated elec-trode MMA. Arc ignition can be carried out by the HF ionizer or by friction of the wolfram electrode’s end. Big advantage is clear and easy to use modern panel with welding current display. Control panel is designed for quick and intuitional change of parameters by a single knob. No need to remember the sequence of settings for the given function, which greatly simplifies the welding operation. The knob is designed to set values (e.g. welding current or current fall time), or to switch between functions and working modes. Display on front panel can show welding current, function values or error code if device’s work is disturbed.
Technical data
PONTIG 1880 HF PONTIG 2220 HF PRO
Main voltage (50/60 Hz) 1 x 230 V +20%/-15% 1 x 230 V +20%/-15%Range of welding current 10-160 A 10-200 AMaximal power consumption TIG / MMA 5,4 / 6,7 kVA 6,1 / 7,2 kVA
Welding current TIG/MMA● At x10% duty cycle● At x60% duty cycle● At x100% duty cycle
160 / 160 A 40 / 130 A
120 / 100 A200 / 200 A 150 / 140 A
Open circuit voltage 80 V 58 VProtection class IP23C IP23Isolation class H HDimensions (LxWxH) 320x135x285 mm 430x175x325 mmWeight 4,9 kg 7,4 kg
Equipment
rectifier PONTE 1880HF, TIG holder 17/4 m,
wolfram electrode 1,6, ground cable 3 m, gas hose with connection,
suitcase, operating manual available
rectifier PONTE 2220HF PRO, TIG holder 26/4 m, wolfram electrode 2.4, ground cable 3 m, gas hose with connection,
suitcase, operating manual available
Catalogue No. 52 00 005240 52 00 005280
The control panel with its digital display allows to select the following working modes:PONTIG 1880 HF● coated electrode welding MMA● TIG DC welding with continuous current● 2-stroke operating button on TIG holder● 4-stroke operating button on TIG holder● arc ignition by HF ionizer (TIG) or by friction of wolfram electrode’s end
PONTIG 2220 HF PRO● coated electrode welding MMA● TIG DC welding● TIG DC welding with pulsing current● TIG welding at high frequency pulse (from 10 to 500 Hz)● 2-stroke operating button on TIG holder● 4-stroke operating button on TIG holder● arc ignition by HF ionizer (TIG) or by friction of wolfram electrode’s end
Very modern, ergonomic housing is made of high quality materials. The resistance of the housing is reinforced by producer’s patented solution called DDR (Dual Density Reinforcement). Rubber shields have three basic functions:● non-slip layer on handle● non-slip layer on the sides of the base to increase adhesion to the
ground and to protect from accidental fall● shock absorbing inside the unit to protect electronic componentsDevices automatically switch to STAND BY mode, if the welding does not restart within 15 minutes. It helps to save energy and, signi-ficantly affects on increasing the lifetime of some electronic com-ponents and reducing the risk of accidental run of the electric arc.Built-in intelligent ventilation system, which works in case of we-lding or exceeding specified temperature inside, which allows to li-mit the dust accumulation inside machine and increases lifetime of rectifiers. Devices are equipped with self-diagnosis system, which shows the error codes on the display, in case of their occurrence. In case of electrode welding there are available functions HOT START and Anti-Stick. TIG DC welding at pulsing current (PONTIG 2220 HF PRO) allows welding of thin metal sheets without distor-tion and discoloration thanks to less heat induction into the weld. Working at TIG DC with high frequency pulsing current can be regu-lated from 10 to 5000 Hz.Equipment is delivered in plastic suitcase with a TIG holder and earth cable.
PONTIG 1880 HF MOST PONTIG 2220 HF PRO MOST
panelPONTIG 1880 HF MOST
panelPONTIG 2220 HF PRO MOST
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
2. TIG equipment and torches © Copyright RYWAL-RHC20
www.most.com.pl
■ The PONTIG 200 AC / DC is used for TIG and MMA welding. In TIG welding dedicated for carbon, stainless steel, copper and its alloys using DC power or select AC for aluminum and its alloys. Arc ignition is via HF ionizer or by friction of the worlfram electrode (LiftArc).Setting of welding parameters is done on the front panel in an intuitive way, the values of adjusted parameters indicate two LC displays and the appro-priate LED.Pulsating current in TIG welding is available in the range of 0.5 - 200 Hz. For welding of aluminum with alternative current (TIG AC) positive and negative component of the welding current are controlled. As the inverter device PONTIG 200 AC / DC is characterized by low weight and dimensions.
Technical data
PONTIG 200 AC/DCMain voltage 230 V – 50/60 Hz
Range of welding current TIG: 5-200 A MMA: 5-170 A
Protect network 16 AWelding current TIG / duty cycle:
AC: 200 A/20%, 90 A/60%, 70 A/100% DC: 200 A/25%, 110 A/60%, 80 A/100%
Welding current MMA/ duty cycle:
AC: 170 A/20%, 90 A/60%, 70 A/100% DC: 170 A/25%, 110 A/60%, 80 A/100%
Open circuit voltage Uₒ AC: 73 VDC: 68 V
Isolation class FProtection class IP 23SDimensions- (LxWxH) 250x470x400 mmWeigth 21,8 kgCatalogue No. 52 00 005420
Accessories:Earth and electrode cable 3 m/25 mm² (set.) 53 99 990103Earth cable 4 m/25 mm² 53 99 102504Cooling unit MOST Fancool 601 WA 50 03 003805Welding trolley WUS-150 MOST 50 03 003900TIG torch 26+ 4 m (PONTIG 200) MOST 56 01 032614TIG torch 26+ 8 m (PONTIG 200) MOST 56 01 032618TIG torch 20W+ 4 m (PONTIG 200) MOST 56 01 032014TIG torch 20W+ 8 m (PONTIG 200) MOST 56 01 032018Argon regulator MOST 62 30 750400Leg remote control CTRL 3 m 5.0174 50 10 098595 Connecting set to TIG torch 51 13 014478
PONTIG 200 AC/DCThe first device for TIG welding of aluminum under the brand MOST
212. TIG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
2.2. TIG welding torches
17V MOST
No. Name Catalogue No. Alternative marking
1 Torch body SR-17V MOST 56 13 003417 405P200800
2 Valve SR-17V 56 13 003135 -
3 Handle SR-17V+ MOST 56 13 007512 402P171301
4 Gasket SR-17/18/26 56 13 014810 18CG
5 Back cap long SR-17/18/26 56 13 003181 57Y02
6 Back cap short SR-17/18/26 56 13 003270 57Y04
7
Collet 1,0 SR-17/18/26 56 13 009930 10N22
Collet 1,6 SR-17/18/27 56 13 009932 10N23
Collet 2,0 SR-17/18/28 56 13 009934 -
Collet 2,4 SR-17/18/29 56 13 009936 10N24
8
Collet body TIG 1,0 SR-17/18/29 56 13 003830 10N30
Collet body TIG 1,6 SR-17/18/30 56 13 003883 10N31
Collet body TIG 2,0 SR-17/18/31 56 13 003914 -
Collet body TIG 2,4 SR-17/18/32 56 13 003921 10N32
9
Ceramic nozzle 6,5x47 #4 56 13 000768 10N50
Ceramic nozzle 8,0x47 #5 56 13 000770 10N49
Ceramic nozzle 9,5x47 #6 56 13 000780 10N48
Ceramic nozzle 11,0x47 #7 56 13 000783 10N47
Ceramic nozzle 12,5x47 #8 56 13 000784 10N46
10
Ceramic nozzle 8,0x76#5 56 13 001006 10N49L
Ceramic nozzle 9,5x76 #6 56 13 001008 10N48L
Ceramic nozzle 11,0x76 #7 56 13 001010 10N47L
11 Cable set SR-17 MOST 4 m 56 13 016160 314P10MI40
11.1 Cable set SR-17 MOST 8 m 56 13 016164 314P10MI80
12 Laminar insulator/ gasket 56 13 014812 54N01
13
Gas lens body 1,0 SR-17/18/26 56 13 008235 45V24
Gas lens body 1,6 SR-17/18/26 56 13 008252 45V25
Gas lens body 2,4 SR-17/18/26 56 13 008272 45V26
14
Ceramic nozzle 6,5x42 lam #4 56 13 000902 54N18
Ceramic nozzle 8,0x42 lam #5 56 13 000900 54N17
Ceramic nozzle 9,5x42 lam #6 56 13 000888 54N16
Ceramic nozzle 11,0x42 lam #7 56 13 000886 54N15
Ceramic nozzle 12,5x42 lam #8 56 13 000884 54N14
15 Outer hose 35x1,5 [mb] 51 13 015240 -
16 MOST Plug / insulation boot SR-17V+ MOST 10-25 56 13 016412 711P001005
16.1 MOST Plug / insulation boot SR-17V+ MOST 35-50 56 13 016432 711P001105
17 Gas supply hose nut 1/4 50 14 182035 700P002041
17.1 Gas supply hose Ø5 50 14 182044 420P002012
Type 17V MOST
Cooling Gas
Technical data according to EN 60 974-7Max. load at 60% duty cycle
125 A AC140 A DC
Diameter of wolfram electrode 0,5 - 2,4 mm
Gas flow 5 - 12 l/min
Weight 0,75 kg
Length Catalogue No.
4,0 m/ 10-25 56 03 016810
8,0 m/ 10-25 56 03 016830
V – handle with gas valve, without triggerDC – direct currentAC – alternating current
G1/4”
TSB 10-25
Handle
MOST 17V
Standard version lens
Version withgas lens
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
2. TIG equipment and torches © Copyright RYWAL-RHC22
www.most.com.pl
26+ MOST26F+ MOST (version with flexible torch)
Handle TIGMOST 26F+
Standardversion lens
Version withgas lens
G1/4”
TSB 3550
3 control cables
Trigger STD
MOST 26+
5/8” - 18G
Version withbig gas lens
232. TIG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
26+ MOST26F+ MOST (version with flexible torch)
No. Name Catalogue No. Alternative marking
1 Torch body SR-26+ MOST 56 13 003426 405P2607021.1 Torch body SR-26F+ MOST 56 13 003397 -2 Handle trigger TIG+ -el. plate MOST 56 13 016220 401P1020223 Handle SR-18/20/26 MOST 56 13 007711 401P1015104 Gasket SR-17/18/26 56 13 014810 18CG5 Back cap long SR-17/18/26 56 13 003181 57Y026 Back cap short SR-17/18/26 56 13 003270 57Y04
7
Collet 1,0 SR-17/18/26 56 13 009930 10N22Collet 1,6 SR-17/18/27 56 13 009932 10N23Collet 2,0 SR-17/18/28 56 13 009934 -Collet 2,4 SR-17/18/29 56 13 009936 10N24Collet 3,2 SR-17/18/29 56 13 009940 10N25Collet 4,0 SR-17/18/29 56 13 009942 54N20
7.1Collet 2,4 Jumbo 56 13 010024 702.0009Collet 3,2 Jumbo 56 13 010032 712.6064
8
Collet body TIG 1,0 SR-17/18/29 56 13 003830 10N30Collet body TIG 1,6 SR-17/18/30 56 13 003883 10N31Collet body TIG 2,0 SR-17/18/31 56 13 003914 -Collet body TIG 2,4 SR-17/18/32 56 13 003921 10N32Collet body TIG 3,2 SR-17/18/32 56 13 003952 10N28Collet body TIG 4,0 SR-17/18/32 56 13 003960 406488
9
Ceramic nozzle 6,5x47 #4 56 13 000768 10N50Ceramic nozzle 8,0x47#5 56 13 000770 10N49Ceramic nozzle 9,5x47 #6 56 13 000780 10N48Ceramic nozzle 11,0x47 #7 56 13 000783 10N47Ceramic nozzle 12,5x47 #8 56 13 000784 10N46Ceramic nozzle 16,0x47#10 56 13 000786 10N45Ceramic nozzle 19,5x47 #12 56 13 000788 10N44
10Ceramic nozzle 8,0x76#5 56 13 001006 10N49LCeramic nozzle 9,5x76 #6 56 13 001008 10N48LCeramic nozzle 11,0x76 #7 56 13 001010 10N47L
11 Cable set SR-26+ MOST 4 m 56 13 016180 314P358I4011.1 Cable set SR-26+ MOST 8 m 56 13 016184 314P358I8011.2 Cable set SR-26+ MOST 12 m 56 13 016188 314P358I1C12 Laminar insulator/ gasket 56 13 014812 54N01
12.1 Laminar insulator / gasket Jumbo 56 13 017813 701.112254N63
13
Gas lens body 1,0 SR-17/18/26 56 13 008235 45V24Gas lens body 1,6 SR-17/18/26 56 13 008252 45V25Gas lens body 2,4 SR-17/18/26 56 13 008272 45V26Gas lens body 3,2 SR-17/18/26 56 13 008301 45V27Gas lens body 4,0 SR-17/18/26 56 13 008310 45V28
13.1Gas lens body 2,4 SR-17/18/27 Jumbo 56 13 008276 45V64Gas lens body 3,2 SR-17/18/27 Jumbo 56 13 008280 995795
14
Ceramic nozzle 6,5x42 lam #4 56 13 000902 54N18Ceramic nozzle 8,0x42 lam. #5 56 13 000900 54N17Ceramic nozzle 9,5x42 lam. #6 56 13 000888 54N16Ceramic nozzle 11,0x42 lam. #7 56 13 000886 54N15Ceramic nozzle 12,5x42 lam. #8 56 13 000884 54N14Ceramic nozzle. 19,5x42 lam. #12 56 13 000882 54N19
14.1
Ceramic nozzle 9,5x48 Jumbo #6 56 13 001115 57N75Ceramic nozzle 12,5x48 Jumbo #8 56 13 001116 57N74Ceramic nozzle 16x48 Jumbo #10 56 13 001117 53N88Ceramic nozzle 19,5x48 Jumbo #12 56 13 001119 53N87
15 Outer hose 35x1,5 [mb] 51 13 015240 -16 MOST+ Plug / insulation boot SR-26 MOST 35-50 56 13 016419 701P10102017 Ball joint TIG+ 56 13 016437 401P10203218 Power cable [mb] 56 13 015900 -19 Gas supply hose nut 1/4 50 14 182040 700P002041
19.1 Gas supply hose Ø5 50 14 182044 420P002012
Type26+ MOST
26F+ MOST (version with torch flexible)
Cooling Gas
Technical data according to EN 60 974-7Max. load at 60% duty cycle
200 A AC 240 A DC
Diameter of wolfram electrode 0,5 - 3,2 mm
Gas flow 5 - 12 l/min
Weight 1,05 kg
Length Catalogue No.
26+ MOST
4,0 m 56 01 026004
8,0 m 56 01 026008
12,0 m 56 01 026012
26F+ MOST4,0 m 56 01 002654
8,0 m 56 01 002658
12,0 m 56 01 002662
DC - direct currentAC - alternating current
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
2. TIG equipment and torches © Copyright RYWAL-RHC24
www.most.com.pl
20W+ MOST
Handle TIG
G1/4”
TSB 3550
3 control cables
Trigger STD
MOST 20W+
1/4” - 28G
252. TIG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
20W+ MOST
No. Name Catalogue No. Alternative marking
1 Torch body SR-20W MOST 56 13 003420 405P200800
2 Trigger TIG+ -el. plate MOST 56 13 016220 401P102022
3 Handle SR-9/20/17 MOST 56 13 007710 401P101010
4 Insulator / gasket SR-9/20 56 13 014806 598882
5 Back cap long SR-9/20 56 13 003170 41V24
5.1 Back of average SR-9/20 56 13 003250 41V35
6 Back cap short SR-9/20 56 13 003280 41V33
7
Collet 1,0 SR-9/20 56 13 009920 13N21
Collet 1,6 SR-9/20 56 13 009922 13N22
Collet 2,0 SR-9/20 56 13 009923 -
Collet 2,4 SR-9/20 56 13 009924 13N23
Collet 3,2 SR-9/20 56 13 009927 13N24
8
Collet body TIG 1,0 SR-9/20 56 13 003840 13N26
Collet body TIG 1,6 SR-9/20 56 13 003881 13N27
Collet body TIG 2,0 SR-9/20 56 13 003912 -
Collet body TIG 2,4 SR-9/20 56 13 003920 13N28
Collet body TIG 3,2 SR-9/20 56 13 003950 13N29
9
Ceramic nozzle 6,5x30 #4 56 13 000384 13N08
Ceramic nozzle 8,0x30 #5 56 13 000386 13N09
Ceramic nozzle 9,5x30 #6 56 13 000390 13N10
Ceramic nozzle 11,0x30 #7 56 13 000394 13N11
Ceramic nozzle 12,5x30 #8 56 13 000396 13N12
Ceramic nozzle 16,0x30 #10 56 13 000398 13N13
10
Ceramic nozzle 6,5x25,5 #4 56 13 000908 53N58
Ceramic nozzle 8x25,5 #5 56 13 000910 53N59
Ceramic nozzle 9,5x25,5 #6 56 13 000911 53N60
Ceramic nozzle 11 x25,5 #7 56 13 000912 53N61
11Ceramic nozzle 6,5x63 #4 56 13 000914 796F75
Ceramic nozzle 8x63 #5 56 13 000915 796F76
12
Gas lens body 1,0 SR-9/20 56 13 008230 45V42
Gas lens body 1,6 SR-9/20 56 13 008250 45V43
Gas lens body 2,4 SR-9/20 56 13 008271 45V44
Gas lens body 3,2 SR-9/20 56 13 008300 45V45
13
Ceramic nozzle 6,5x48 #4 56 13 000947 796F71
Ceramic nozzle 8x48 #5 56 13 000946 796F72
Ceramic nozzle 9,5x48 #6 56 13 000945 796F73
14 Cable set SR-20W+ MOST 4 m 56 13 016190 314P10MI40
14.1 Cable set SR-20W+ MOST 8 m 56 13 016194 314P10MI80
14.2 Cable set SR-20W+ MOST 12 m 56 13 016198 314P10MI1C
15 Outer hose 35x1,5 [mb] 51 13 015240 -
16 Power cable [mb] 56 13 015900 -
17 Ball joint TIG+ 56 13 016437 401P102032
18 Nipple nut 1/4 50 14 182040 700P002041
18.1 Nipple Ø 5 50 14 182044 420P002012
19 Water hose blue (supply) [rm] 51 13 007120 -
19.1 Water hose red (return) [rm] 51 13 007115 -
20 Gas hose (supply) [rm] 55 13 015370 -
21 MOST+ Plug TIG 20/18W+ 56 13 016418 701P101020
Type 20W+ MOST
Cooling Liquid
Technical data according to EN 60 974-7
Max. load at 60% duty cycle 200 A AC220 A DC
Diameter of wolfram electrode 0,5 - 3,2 mm
Gas flow 5 - 12 l/min
Weight 0,95 kg
Length Catalogue No.
4,0 m 56 01 002004
8,0 m 56 01 002008
12,0 m 56 01 002012
DC - direct currentAC - alternating current
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
2. TIG equipment and torches © Copyright RYWAL-RHC26
www.most.com.pl
18W+ MOST
Handle TIG
Standardversion lens
Version withgas lens
cooled liquid
TSB 3550
3 control cables
Trigger STD
MOST 18W+
3/8” - 24G LH
Version withbig gas lens
272. TIG equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
18W+ MOST
No. Name Catalogue No. Alternative marking
1 Torch bodySR-18W+ MOST 56 13 003418 405P180702 2 Trigger TIG+ -płytka el. MOST 56 13 016220 401P102022 3 Handle SR-18/20/26 MOST 56 13 007711 401P101510 4 Insulator SR-17/18/26 56 13 014810 18CG 5 Back cap long SR-17/18/26 56 13 003181 57Y02 6 Back cap short SR-17/18/26 56 13 003270 57Y04
7
Collect 1,0 SR-17/18/26 56 13 009930 10N22Collect 1,6 SR-17/18/27 56 13 009932 10N23Collect 2,0 SR-17/18/28 56 13 009934 -Collect 2,4 SR-17/18/29 56 13 009936 10N24Collect 3,2 SR-17/18/29 56 13 009940 10N25Collect 4,0 SR-17/18/29 56 13 009942 54N20
7.1Collect 2,4 Jumbo 56 13 010024 702.0009Collect 3,2 Jumbo 56 13 010032 712.6064
8
Collect body TIG 1,0 SR-17/18/29 56 13 003830 10N30Collect body TIG 1,6 SR-17/18/30 56 13 003883 10N31Collect body TIG 2,0 SR-17/18/31 56 13 003914 -Collect body TIG 2,4 SR-17/18/32 56 13 003921 10N32Collect body k TIG 3,2 SR-17/18/32 56 13 003952 10N28Collect body TIG 4,0 SR-17/18/32 56 13 003960 406488
9
Ceramic nozzle 6,5x47 #4 56 13 000768 10N50Ceramic nozzle 8,0x47 #5 56 13 000770 10N49Ceramic nozzle 9,5x47 #6 56 13 000780 10N48Ceramic nozzle 11,0x47 #7 56 13 000783 10N47Ceramic nozzle 12,5x47 #8 56 13 000784 10N46Ceramic nozzle 16,0x47 #10 56 13 000786 10N45Ceramic nozzle 19,5x47 #12 56 13 000788 10N44
10 Ceramic nozzle 8,0x76 #5 56 13 001006 10N49LCeramic nozzle,5x76 #6 56 13 001008 10N48LCeramic nozzle 11,0x76 #7 56 13 001010 10N47L
11 Cable set SR-18W+ MOST 4 m 56 13 016170 314P10EI40 11.1 Cable set SR-18W+ MOST 8 m 56 13 016174 314P10EI8011.2 Cable set SR 18W+ MOST 12 m 56 13 016178 314P10EI1C 12 Insulator lam / gasket 56 13 014812 54N01
12.1 Insulator lam / gasket Jumbo 56 13 017813 701.1122/54N63
13
Gas lens body 1,0 SR-17/18/26 56 13 008235 45V24Gas lens body 1,6 SR-17/18/26 56 13 008252 45V25Gas lens body 2,4 SR-17/18/26 56 13 008272 45V26Gas lens body 3,2 SR-17/18/26 56 13 008301 45V27Gas lens body 4,0 SR-17/18/26 56 13 008310 45V28
13.1 Gas lens body 2,4 SR-17/18/27 Jumbo 56 13 008276 45V64Gas lens body 3,2 SR-17/18/27 Jumbo 56 13 008280 995795
14
Ceramic nozzle 6,5x42 lam #4 56 13 000902 54N18Ceramic nozzle 8,0x42 lam #5 56 13 000900 54N17Ceramic nozzle 9,5x42 lam #6 56 13 000888 54N16Ceramic nozzle 11,0x42 lam #7 56 13 000886 54N15Ceramic nozzle 12,5x42 lam #8 56 13 000884 54N14Ceramic nozzle 19,5x42 lam #12 56 13 000882 54N19
14.1
Ceramic nozzle 9,5x48 Jumbo #6 56 13 001115 57N75Ceramic nozzle 12,5x48 Jumbo #8 56 13 001116 57N74Ceramic nozzle 16x48 Jumbo #10 56 13 001117 53N88Ceramic nozzle 19,5x48 Jumbo #12 56 13 001119 53N87
15 Outer hose 35x1,5 [mb] 51 13 015240 - 16 Power supply mb 56 13 015900 - 17 Ball joint TIG+ 56 13 016437 401P102032 18 Nipple nut1/4 50 14 182040 700P002041
18.1 Nipple Ø 5 50 14 182044 420P002012 19 Water hose blue supply [rm] 51 13 007120 -
19.1 Water hose red return [rm] 51 13 007115 - 20 Gas hose supply [rm] 55 13 015370 - 21 MOST+ Plug TIG 20/18W+ 56 13 016418 701P101020
Type 18W+ MOST
Cooling Liquid
Technical data according to EN 60 974-7
Max. load at 100% duty cycle 240 A AC320 A DC
Diameter of wolfram electrode 0,5 - 4,0 mm
Gas flow 5 - 12 l/min
Weight 1,06 kg
Length Catalogue No.
4,0 m 56 01 001804
8,0 m 56 01 001808
12,0 m 56 01 001812
DC - direct currentAC - alternating current
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
2. TIG equipment and torches © Copyright RYWAL-RHC28
www.most.com.pl
TIG welding torches
Other TIG holders (substitutes)ABICORBINZEL
ABICORBINZEL (old) TRAFISTEL LE WELDCRAFT ESAB LORCH MOST
ABITIG 9 SRT-9 / SR-9 TIG-9 LT-9 CK-9
BTD123HW-20ARV
BTF-140TXH 120
WLT-9LTG 900 -
ABITIG 17 SRT-17 / SR-17 TIG-17 LT-17 CK-17
BTD153HW-17BTF150TXH 150
WLT-17LTG 1700 MOST 17V+
ABITIG 20 SRT-20 / SR-20 TIG-20 LT-20W CK-20
BTD253WHW-20
BTF250WTXH 250W
WWT-20LTW 3000 MOST 20W+
ABITIG 26 SRT-26 / SR-26 TIG-26 LT-26 CK-26
BTD203HW-26BTF200TXH 200
WLT-26LTG 2600 MOST 26+
ABITIG 18 SRT-18 / SR-18 TIG-18 LT-18W CK-18
BTD403WHW-18
(BTF400W)TXH 400W
WWT-18LTW 1800 MOST 18W+
Plugs
Plugs Name Comment Catalogue No.
Gas
Hose plug fi 6 Faltig + GER 9,5 50 14 182003Nipple nut1/4 299TG2 Esab, Aspa + GER 9,5 50 14 182040Nipple nutfi 5 299TG881 50 14 182044Hose plug 2,7 LE, Lorch + GER8,0 50 14 182006
Control
Plug SzR16P2NG5 Faltig-160 51 13 014495Plug SzR20P4NG4 Faltig-315 51 13 014497Plug Amphenol 2-bolc. ESAB (0349303269) 51 13 014450Plug 3 bolt. Tuchel 175.0009 Faltig 161, 200, 250, 400 56 13 140140Plug 5 bolt. Tuchel 175.0011 LE, Lorch 51 13 014470Plug 5 bolt. round Pontig 1880HF, Pontig 2220 51 13 014490
Liquid Hose plug Ø6 mm GER 9,5 50 14 182003
Clamp GER 9,5 50 15 000095GER 8,0 50 15 000080
Tungsten (wolfram) electrodes for TIG welding
Catalogue No. Name and signature Marking
colour Current Comments Dimension
50 19 92XX17 With Thorium 2% WT20 red DC Slightly radioactive
Electrodes available in
length: 175mm.
Typical diameters (mm):
1,0; 1,6; 2,0; 2,4; 3,0; 3,2; 4,0.
50 19 94XX17 With Thorium 4% WT40 orange DC Withdrawn from the offer
50 19 93XX17 Pure Wolfram WP green AC50 19 91XX17 With Lanthanum WL10 black AC/DC50 19 97XX17 With Cerium WC20 gray AC/DC50 19 94XX17 With Lanthanum WL15 gold AC/DC
50 19 95XX17 With rare-earth-ele-ments Multi-Strike turquoise AC/DC
Best properties with steel and aluminium
welding; length:175 mm; diam. 1.0;
1.6; 2.4; 3.2; 4.0 mmXX - electrode diameter, eg. fi 1.6 mm = 16; 2.4 mm = 24; etc..
AC – alternating current / aluminium weldingDC – direct current / stainless and carbon steel welding
Grinding Angle for tungsten electrodes recommended for DC
welding (according to manufacturer instruction)
Welding Power Electrode angle 20 A 30°20-100 A 60°-90°100 - 200 A 90°-120°> 200 A 120°
Recommended welding curent (according manufacturer instruction)
Electrodes diameter
Recommended DC power
Recommended AC power
1,0 mm 3-40 A 5-30 A*1,6 mm 15-130 A 20-90 A*2,0 mm 45-180 A 45-135 A*2,4 mm 70-240 A 70-180 A*3,2 mm 140-320 A 130-250 A*4,0 mm 220-450 A 200-320 A*
*) Depending on the type of electrode, and AC balance control parameter
293. MMA equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
Wolfram electrodes sharpenerWAG 40 MOST
■ The device is designed only for wolfram electrodes sharpening used in TIG welding.In wolfram electrode welding, the precise sharpening of an electrode is dependent on its diameter, welding current and current intensity. A sharped electrode guaran-tee perfect arc ignition and increases the lifetime of the electrode.
Functions of the sharpener WAG 40 MOST:● sharpening of electrodes from 1,0 to 4,0 mm● adjustment of sharpening angle from 15 to 180°● possibility to adjust the depth to minimize electrode wear in sharpening● sharpening of electrodes from 15 mm length● suitable for sharpening of short electrodes, longer collets (marked L) - additional
equipment needed● suitable to use on the table as well as in hand● built-in replaceable dust filter (type 8511K1.H12)● tabletop stand is optional
Sharpener WAG 40 MOST is necessary in orbital TIG welding, plasma welding and professional manual TIG welding.Equipment is delivered in suitcase, with wolfram electrode handle and clamps for diameters 1,6; 2,4 and 3,2 mm, and set of spanners for sharpener maintenance.
Technical dataWAG 40 MOST
Power P1 650 WMain voltage 230 V / 50-60 HzRotation od 8.000 do 32.000 obr./minNoise level 88,8 dB (A)Vibration level 5 m/sWeight 2,8 kgFilter cartridge disposable filter
Diamond disc � 40 mm(Catalogue No. 59 30 000201)
Catalogue No. 59 30 000110
3. MMA EQUIPMENT AND TORCHES3.1 MMA equipment
Inverter rectifiers MOSTPONTE 3.2 and PONTE 4.0
■ Ponte 3.2 and Ponte 4.0 are the supplements of MMA inverter series powered by single-phase current.Their names are connected with the diameter of the welding electrodes recommended to be used:● Ponte 3.2 – up to the diameter of 3,2 mm● Ponte 4.0 – up to the diameter of 4,0 mmThese units are price-competitive with many welding devices being offered in supermarkets and inthe internet. Easy to use control panel includes everything needed for electrode welding: currentsetting knob, working mode switch (electrode/LiftTIG) and blinking LEDs signaling welder work oroverheating.Sockets for connecting welding cables: PONTE 3.2 size 10-25, PONTE 4.0 size 35-50.The devices are equipped with a VRD function, which reduces the open circuit voltage to 9 V (at themoment of arc ignition 67 V).
Technical dataPONTE 3.2 PONTE 4.0
Main voltage (50/60 Hz) 1x230 V ± 15% 1x230 V ± 15%Maximal power consumption 5,9 kVA 7,1 kVARange of electrodes MMA 1,6-3,2 mm 1,6-4,0 mm
Welding current at duty cycle 140 A (30%) 77 A (100%)
160 A (30%) 88 A (100%)
Range of welding current 10-140 A 10-160 AOpen circuit voltage (VRD) 9 V 9 VProtection class IP 23 IP 23Dimensions 290x120x198 mm 313x120x198 mmWeight 4,7 kg 5,2 kg
Catalogue No.Rectifier MMA Ponte 3.2 Most 53 00 030632Rectifier MMA Ponte 4.0 Most 53 00 030640Earth and electrode cable 3 m (PONTE 4.0) 53 99 990103Earth and electrode cable 3 m (PONTE 3.2) 53 99 990003TIG holder 26V Most 35-50 4 m (PONTE 4.0) 56 03 016520TIG holder 17V Most 4 m 56 03 016810TIG holder 17V Most 8 m 56 03 016830Suitcase for equipment MOST 52 45 200200Argon regulator MOST 62 30 750400
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
3. MMA equipment and torches © Copyright RYWAL-RHC30
www.most.com.pl
Inverter equipment MOSTPONTE 131 and PONTE 151
■ For demanding welders we offer two devices which can fully satisfy professionalists. Ponte 131 and 151 MOST are inverter welding rectifiers for welding with coated electrodes and for TIG DC welding (arc igni-tion by friction start).Ponte 131 and 151 have a high 45% duty cycle for maximum welding current: for Ponte 131-130A and Ponte 151-150A. Both machines have the active functions Hot Start and Anti-Stick System. New, modern, plastic housing assures IP 23 protection class for the equipment. Thanks to this, both Ponte 131 and 151 are suitable for indoor and outdoor working area.Both devices are equipped with sockets for connecting welding cables in size 10-25.
Catalogue No.Rectifier MMA PONTE 131 53 00 030531Rectifier MMA PONTE 151 53 00 030551Earth and electrode cable MOST 3 m 53 99 990003TIG holder 17V MOST (valve) plug 25 length 4 m 56 03 016810TIG holder 17V MOST (valve) plug 25 length 8 m 56 03 016830Argon regulator MOST 62 30 750400
Technical dataPONTE 131 PONTE 151
Main voltage (50/60 Hz) 1x230 V ± 15% 1x230 V ± 15%Maximal power consumption 4,0 kVA 4,7 kVARange of electrodes MMA 1,6-3,2 mm 1,6-4,0 mm
Welding current at duty cycle130 A (45%)110 A (60%)80 A (100%)
150 A (45%)130 A (60%)
100 A (100%)Range of welding current 10-130 A 10-150 AOpen circuit voltage (VRD) 88 V 88 VProtection class IP 23 IP 23Dimensions 270x130x240 mm 270x130x240 mmWeight 5,1 kg 5,3 kg
Inverter rectifier MOSTPONTE 2060 VRD ■ Ponte 2060 VRD MOST is the unit purposed for welding with MMA coated electrodes and TIG DC welding with friction start. Very modern, ergono-mic housing is made of high-quality materials. The resistance of the housing is reinforced by producer’s patented solution called DDR (Dual Density Reinforcement).
Function of rubber coat shields are:● non-slip layer on handle● non-slip layer on the sides of the base to increase adhesion to the ground and to protect from accidental fall● shock absorbing inside the unit to protect electronic components
The unit has an intelligent ventilation system, which works in case of welding or exceeding the temperature spe-cified inside. This solution allows to limit the dust accumulation inside and increases PONTE 2060 VRD lifetime. This device is equipped with a self-diagnosis system, which shows the error codes on the display in case of their occurrence. The purpose of the VRD function is to increase the welder’s safety in dangerous working environ-ment. Particularly working on wet surfaces or in high atmospheric moisture conditions, to protect against electric shock. The VRD function switches off the power supply in milliseconds after the welding is finished and reduces the voltage on the coated electrodes to the safe level (about 11 V). Restarting the welding process activates the machine to work and allows the striking of the arc.The unit is equipped with additional functions which simplify the electrode welding:● HOT START – this function increases the value of the current at the time of arc striking, in relation to the set va-
lue of welding current to simplify start of working;● ANTI-STICK – device reduces the current in case of short-circuit and electrode stick, thus allows its separation
from the workpiece.The unit has a clear control panel with digital display and knob to choose the type of work MMA, MMA & VRD, TIG DC Lift-Arc
Technical dataPONTE 2060 VRD
Main voltage (50/60 Hz) 1x230 V ± 15%Maximal power consumption 7,2 kVARange of electrodes MMA 1,6-4,0 mm
Welding current at duty cycle 200 A (60%)140 A (100%)
Range of welding current 10-200 AOpen circuit voltage (VRD) 58 VProtection class IP 23CDimensions 430x175x325 mmWeight 7,2 kg
Catalogue No.Rectifier MMA PONTE 2060 VRD MOST, suitcase and cables 53 00 003810TIG holder 26V MOST, plug 35-50 length 4 m 56 03 016520Argon regulator MOST 62 30 750400
313. MMA equipment and torches© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
Inverter rectifierMOST PONTE 251 CEL
■ The Most powerful Ponte machine for coated electrode welding. It requires a main power supply of 400 V due to 250 A welding current.It allows to weld with any type of rutile, basic or cellulose coated electrodes including the diameter up to 5.0mm. The welding current display (A or V) and all switches are located on the front panel. The value of ArcForce and Hot Start function can be regulated.
Technical dataPONTE 251 CEL
Main voltage (50/60 Hz) 3x400 V ± 10%Maximal power consumption 10 kWRange of electrodes MMA 1,6-5,0 mm
Welding current at duty cycle250 A (35%)190 A (60%)
150 A (100%)Range of welding current 10-250 AOpen circuit voltage (VRD) 97 VProtection class IP 23SDimensions 490x240x400 mmWeight 22 kg
Catalogue No.Rectifier MMA Ponte 251 CEL 53 00 030735Earth and electrode cable 35-50 3 m 53 99 990103TIG holder 26V MOST plug 35-50 length 4 m 56 03 016520Argon regulator MOST 62 30 750400
3.2. MMA electrode holders
MMA Holders MOST
Type Catalogue No.COMFORT 200 A MOST 57 00 000200COMFORT 400 A MOST 57 00 000400COMFORT 600 A MOST 57 00 000600RATATIONAL 200 A MOST 57 00 001002RATATIONAL 400 A MOST 57 00 001004RATATIONAL 600 A MOST 57 00 001006PRIMA 200 A MOST 57 00 001020PRIMA 400 A MOST 57 00 001040160 A/20 MOST* 57 00 001160200 A/30 MOST* 57 00 001200250 A/40 MOST* 57 00 001250300 A/60 MOST* 57 00 001300
COMFORT MOST
ROTATIONAL MOST PRIMA MOST*) Welding cable is fitted on to box ending
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
4. Plasma cutting equipment © Copyright RYWAL-RHC32
www.most.com.pl
4. PLASMA CUTTING EQUIPMENT4.1. Plasma cutterPlasma Cutting UnitFANCUT 40 ■ Small, portable inverter unit dedicated for metal cutting. Low weight and 230V current supply makes it perfect for assembly works and small production.The cutter uses a plasma torch ABICut 45 with a central connector in length 6mm
The unit is delivered with set of spare parts to the plasma torch (3 electrodes, 8 nozzles, a cover and a fence).
Technical dataFanCut 41
Voltage 1x230 V / 50-60 HzNetwork security 16 APower factor 0,98Range of cutting current 20 – 40 A
Cutting current/duty cycle 40 A /40%26 A /60%
Quality cutting – steel 12 mmWorking air pressure 5 barMax. pressure 8 barAir consumption 119 l/minArc ignition pinProtection level IP 23Dimensions (LxWxH) 170x430x270 mmWeight 12,6 kg
Catalogue No.Plasma cutter FanCut 41 59 00 250050Calipers set 745.D121.1 59 00 250103
Spare parts to cutting torch ABICut 45 for FanCut 40 / 41 MOST
No. Name Catalogue No. 13 Torch body ABI45 748.0020.1 59 13 74802014 Handle 748.0053.1 59 13 74805315 Trigger185.0005 55 13 00736016 Short electrode 748.0032.10 59 13 74803217 Long electrode 748.0048.10 59 13 74804818 Diffuser / swill ring748.0033.2 59 13 748033
19 Cutting tip standard 0,8 mm 748.0035.10 59 13 748035
20 Cutting tip long 0,9 mm (pin) 748.0049.10 59 13 748049
21 Shield cap body 45A 748.0043.2 59 13 74804321.1 Shield cap body 748.0052.2 59 13 74805222 Guide / spacer 748.0050.5 59 13 74805023 Key / cutting buggy 748.0059.1 59 13 748059
334. Plasma cutting equipment© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
Universal cooling system MOST for cooling of welding and plasma cutting torchesFANCOOL 601-WA MOST
■ Fancool 601WA MOST is an independent cooling unit for MIG/MAG, TIG and plasma cutting torches.Old type machines with gas cooled welding torches could not weld efficiently with higher current. The solution is to connect Fancool 601 WA MOST to the welding machine MIG, TIG or plasma cutters.This device enables to connect water-cooled torches to many machines, which increases efficiency of welding unit.
Technical dataFancool 601-WA MOST
Tank max 3,0 lMax. pressure p= 0,35 MPa (3,5 bar)Max flow rate Q= 8 l/min Power 230 V/ 50 HzPower consumption 1,3 AProtection class IP 23SWieght 16,6 kgDimensions (W x L x H) 244 x 525 x 290 mmStandard PN EN 60974-2Recognized current in auto mode system
60 A (if welding with lower current manual mode is recommended)
Catalogue No. 50 03 003805
Cooling liquids MOST for cooling of welding and plasma torchesMOST COOL 30
■ Special cooling liquid to plasma and welding torches MOST COOL 30. High quality substancy for the cooling of all types liquid-cooled handles/torches for welding and cutting.● Frost resistant to -30° C, non-conductive, colorless / transparent● Protects torch, welding cables, coolers, equipment for welding and cutting in front of electrolytic
corrosion.● Do not interact aggressively with rubber parts, including seals.
MOST Cool 30: 5l packageCatalogue No.: 84 23 903005
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
5. Welding generators © Copyright RYWAL-RHC34
www.most.com.pl
5. WELDING GENERATORS
Synchronic generators IP 23Durable and reliable generators with wound rotors designed as power source for all units with an extremely high starting current. Equipped with full thermal and overload protection.
EnginesIndustrial engines Honda and B&S Vanguard working in 3000 r./min. range with automatic rotation stabilizator separated from overload, equipped with oil pressure sensors. Some types of generators equipped with diesel engines HATZ rated as the best power source for continuous working.
IP protectionP XX
First cypher Second cypherProtection against foreign bodies and touch Protection against water0 without protection 0 without protection 1 foreign bodies > 50μ m 1 vertically leaking water2 foreign bodies > 12 μm 2 dropping water till 15˚ from vertical line3 foreign bodies > 2,5 μm 3 water sprayed till 60˚from vertical line4 foreign bodies > 1 μm 4 water spouting from all directions5 protection against dust 5 water pouring from all directions
The machines contain the Certificate of Compliance (CE) according to the relevant European Union guidelines. We provide this certificate with each unit.
Welding generatorsMOST 220SMOST 300SE
■ Welding generators are the power source where the generator has to provide current for a welding using coated electrode MMA.Basic advantage of this solution is perfect cooperation between engine and the welding machine and additionaly lower price than for full set consisting of a power generator plus welding equipment. Welding generators are equipped with output sockets 400V / 230V and they can be used as a standard power source durning welding time breaks.
Technical dataMOST 220S MOST 300SE
Welding current 220 A/35% 300 A/35% Power 3~ max rated 6,7 kVA / 6,5 kVA 10,5 kVA / 10,0 kVA Power 1~ 3,5 kVA 4 kVA Voltage 230 V 400 V 230 V 400 V Current 3~ 9,6 A 15,2 A Current 1~ 15,2 A 17,3 A Frequency 50 Hz 50 Hz Generator synchron IP 23 brush synchron IP 23 brush
EngineHonda, GX390, 4-stroke, 1-cylin-der, OHV, 390 cm³, cord reverse
start, rotation 3000/min
Vanguard, HP22, 4-stroke, 2-cy-linders, OHV, 627 cm³, cord start
or starter, rotation 3000/min.Tank and fuel type 6,5 l Pb95/98 20 l Pb95/98 Fuel consumption at 3/4 power 2,7 l/h 3,6 l/h
Work time at 3/4 power 2,4 h 5,5 h Oil amount in bowl 1,3 l 1,7 l Noise 98 dB 98 dB Dimensions (LxWxH) 775x565x595 mm 900x645x620 mm Weight 92 kg 167 kg
Standard equipment
No oil switch, single-phase socket 16A, triple-phase socket 16A, thermal switch, welder (at
35% duty cycle)
No oil switch, single-phase socket 16A, triple-phase socked
16A, remote control switch, magnetic with differential volt-
meter, frequency meter Catalogue No. 50 10 070722 50 10 071030
356. Welding accessories© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
6. WELDING ACCESSORIES
Welding cables OS1 (H01N2D)
Name Catalogue No.OS-16 54 60 000016OS-25 54 60 000025OS-35 54 60 000035OS-50 54 60 000050OS-70 54 60 000070OS-95 54 60 000095
Connectors for welding cables
Name Catalogue No. PhotoCable plug 10/25 MOST 57 00 007025
Cable plug 35/50 MOST 57 00 007050
Cable plug 50/70 MOST 57 00 007070
Cable plug 70/95 MOST 57 00 007095
Cable socket 35/50 MOST 57 00 007150
Cable socket 50/70 MOST 57 00 007170
Socket for device 10/25 MOST 57 00 007225
Socket for device 50/70 MOST 57 00 007270
Plug to device 50/70 MOST 57 00 007370
Earth crocodile clamp
150A MOST Catalogue No. 57 00 003009200A MOST Catalogue No. 57 00 003010300A MOST Catalogue No. 57 00 003011
Earth screw-crocodile clamp
600A MOST Catalogue No. 57 00 004660
Welding hammers
3300 g spiring MOST Catalogue No. 50 00 001610 300 g euro MOST Catalogue No. 50 00 001620
Magnetic bracket
Small triangle MOST Catalogue No. 57 00 004800 Big triangle MOST Catalogue No. 57 00 004850
Rotating magnetic bracket
Torch bracket MIG MOST Catalogue No. 57 00 004880TIG MOST Catalogue No. 57 00 004890
Magnetic triangles
Catalogue No. 57 00 003000
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
6. Welding accessories © Copyright RYWAL-RHC36
www.most.com.pl
Welding Trolley WUS-150 MOST
■ Welding Trolley is designed to put on it and transport dedicated welding machines and in the back side the gas cylinder with suitable size and weight. It is a universal solution for the transport of wedling equipment that do not have their own gear wheels (eg, Ponte, Fancut, Pontig, Fanmig 175i, etc.) together with additional equ-ipment as: welding torches, spare parts, consumables or other tools. Shelves of trolley and legs are made of steel. Top shelf has the ability to secure by fastenings any welding device against accidental tipping or dropping out of the truck. Back part of trolley is designed to transport gas cylinder and is further enhanced. Trolley is equiped with four wheels: two front swivel wheels including one with brakes and two rear wheels disposed on a common axis. Back side of trolley has hooks to allow the security chain bottle. The chain is supplied. One of the legs has mounted clip cable winder. The whole construction is powder-coated.
Simple application
Dryers and thermos for electrodesPD 0-20 MOSTPD 0-50 MOSTGS-6P MOST
■ Electrode oven PD 0-20 MOST and PD 0-50 MOST is designed to dry the electrodes before welding. Usually electrodes demand drying for 2-3 hours at 350°C. After drying process, electrodes should be kept in the ther-mos at 100°C. We recommend the thermos GS-6P MOST .
■ Electrode thermos GS-6P MOST is designed to proper electrode storage after drying at 350°C e.g. in dryer PO-020 MOST. Usually electrodes should be dried for 2-3 hours at 350°C. After bringing to working place should be kept at 100°C, which protects them from getting moisture again. The device is adapted to a voltage range of 230V.
Technical dataDryer
PD 0-20 MOSTDryer
PD 0-50 MOSTTermos
GS-6P MOSTVoltage 230 V 230 V 230 V Power 1200 W 1600 W 300 W
Capacity 20 kg of electrodesIn 4 chambers
50 kg of electrodesIn 4 chambers
6 of electrodes in1 chamber
Temperature setting 60-400°C 60-400°C 30-110°C Weight 14 kg 26 kg 4 kg Dimensions (LxWxH) 690x215x215 mm 800x310x310 mm 545x305x115 mm Catalogue No. 50 00 003000 50 00 003026 50 00 003006
Thermos for electrodes MOST■ Thermos for electrodes MOST provides passive protection previously dried electrodes and the-ir temporary storage:
● two seals effectively protect against water and moisture● robust and rigid housing made of PE-LD● only a quarter of turn needed to close the thermos● sticker that allows to discribe the content of the thermos to help identify● effectively replaces unstable carton-packagings for electrodes● capacity - up to 6.8 kg electrode with length of 450 mm● maximum temperature of electrodes to be hold, 121 ° C Catalogue No. 50 00 004400
Welding pliers MOST
Welding pliers MOST are dedicated to fulfill additional and assistant works during MIG/MAG we-lding process.This small unit allows to cut edge of welding wire, clear the gas nozzle and contact tip from spatters and to fix the elements of welding connector in right position, etc.
Welding Pliers are presented in two sizes:Welding Pliers MOST 7" (recommended for torch MOST 15/24/25), catalogue No. 557 00 004707Welding Pliers MOST 8" (recommended for torch MOST 36/401/501), catalogue No. 557 00 004708
377. Ceramic backings© Copyright RYWAL-RHC
Wel
ding
equ
ipm
ent a
nd a
cces
sorie
s
ISO 9001
7. CERAMIC BACKINGS
The requirement for better quality of products and higher efficiency of production processes results in high-technological welding action. Inadmissible defects may extensively appear in the root of weld during manual welding with coated electrodes and semi-automatic with gas shielding, such as: slag inclusions, gas blowhole, lack of weld penetration. In automatic welding process with the use of flux, when observation of welding process is infinitesimal and current regulation of parameters is complicated, burn-through of contacts may appear. Therefore welders with the best qualifications are needed to make root of weld layer or the root of weld is cut out and gouged. Cutting out and gouging of root of weld is carried out in very difficult ceiling working position or after turning the construction which requires some other activities (e.g. stiffening the construction).
Problems can be eliminated by the use of ceramic backings protecting melted metal from the side of the root. Backings are mounted in welded construction by means of non-complicated systems, which is not a very labour-consuming process. The advantages of using ceramic backings are as follows:● reduced labour consumption thanks to elimination of whole variety of labour-consuming actions (root of weld cutting
out, the gouging, construction turning)● welding actions can be run on one-side in technically convenient positions● possibility of employment of low qualified welders● elimination of weld defects in the root of weld and necessity of removing themIt should be emphasized, that labour consumption constitutes 70-75% of typical welding construction costs and any reduction of it gives significant savings which considerably surpass the cost of purchasing ceramic backings.
Ceramic backings MOSTNo. Type – dimensions [mm] Length Comments
1 600 mm24 seg x 25 mm
225 mm ceramic blocks are mounted on self--adhesive aluminium tape 85 mm.
Packaging: 30 pieces
Catalogue No.: 50 49 500550
2 600 mm24 seg x 25 mm
25 mm ceramic blocks are mounted on self-adhesive aluminium tape 85 mm
Packaging: 25 pieces
Catalogue No.: 50 49 500500.
3 600 mm24 seg x 25 mm
25 mm ceramic blocks are mounted on self—adhesivealuminium tape 85 mm
Packaging : Ø 8,0 mm - 160 pcs.Ø 10,0 mm - 120 pcs.Ø 12,0 mm - 100 pcs.Ø 15,0 mm - 75 pcs.
Catalogue No. :Ø 8,0 mm - 50 49 500080Ø 10,0 mm - 50 49 500100Ø 12,0 mm - 50 49 500120Ø 15,0 mm - 50 49 500150
MOST LT05 TIA
MOST LT 05TT TIA
MOST LT 06 TIA