001ss 5/19/10 3:20 pm page 1 power tools · 2016-12-06 · max rpm 0–450/0–1,450/0–1,800 max...

1

Power Tools

Cordless

DCD950KX18V XRP™ Hammerdrill/Drill/Driver Kit• XRP™ extended run-time batteries provide

long run-time & battery life• Patented 3-speed all-metal transmission

matches the tool to task for fastest applicationspeed and improved run time

• Heavy-duty 1/2" self-tightening chuck tightensthroughout operationproviding superior bit grippingstrength

DCD940KXHeavy-Duty 18V 1/2" XRP™Cordless Drill/Driver• • XRP™ extended run-time batteries provide long

run-time & battery life• Patented 3-speed all-metal transmission matches

the tool to task for fastest application speed andimproved run time

• Heavy-duty 1/2"ratcheting chuck helpsprevent bits from slippingand falling out

DW999K-2Heavy-Duty 7/8" (24mm)18V Cordless SDS RotaryHammer Kit• Variable speed, reversing switch delivers

versatility in all applications• Factory-set clutch reduces sudden,

high torque reactions if bit jams• Electro-pneumatic hammer

mechanism for fast penetration andlow vibration

• 360° side handle for better controland ease of use in tight spaces

Voltage 18VMax Power 450 UWO# of Speed Settings 3Max RPM 0–500/0–1,250/0–2,000Max BPM 0–8,500/0–21,250/

0–34,000Clutch Settings 22Chuck Size 1/2"Chuck Type Self-tightening

Voltage 18VMax Power 450 UWO# of Speed Settings 3Max RPM 0–500/0–1,250/0–2,000Clutch Settings 22Chuck Size 1/2"Chuck Type ratchetingTool weight 6.25 lbs

Voltage 18VNo Load Speed 0–1,100 rpmBlows/Min 0–4,100 bpmConcrete Maximum 7/8"Concrete Optimum 5/32"–3/8"Tool Length 16-5/8"Tool Weigh 7.85 lbsShipping Weight 14.1 lbs

DCD939KX14.4V 1/2" XRP Hammerdrill/Drill/Driver • XRP™ extended run-time batteries provide long

run-time & battery life• Patented 3-speed transmission matches the tool to

task application for fastest application speed• Heavy-duty 1/2" self-tightening

chuck tightens throughoutoperation providing superior bit gripping strength



DCD920KX14.4V 1/2" XRP Drill/Driver• XRP™ extended run-time batteries provide long



• Heavy-duty 1/2" ratcheting chuck helps preventbits from slipping andfalling out Voltage 14.4V

Max Power 325 UWO# of Speed Settings 3Max RPM 0–425/0–1,200/0-1,800Clutch Settings 22Chuck Size 1/2"Chuck Type ratchetingTool Weight 5.75 lbs

DCD910KX12V 1/2" XRP Drill/Driver• XRP™ extended run-time batteries provide long



• Heavy-duty 1/2"ratcheting chuck helpsprevent bits from slippingand falling out

• LED Worklight providesincreased visibility inconfined spaces

• High power, highefficiency motor delivers 285 unit watts out of max power for superiorperformance in all drilling and fastening applications

• Best in class length improved balance and better control

Voltage 12VMax Power 285 UWO# of Speed Settings 3Max RPM 0–425/0–1,200/0–1,800Clutch Settings 22Chuck Size 1/2"Chuck Type ratchetingTool Weight 5.25 lbs

001SS 5/19/10 3:20 PM Page 1

2

Power Tools

Cordless

DC520KAHeavy-Duty 18VCordless Drywall/DeckScrewdriver Kit• Dual speed ranges

(0–900/0–2,900 rpm); highspeed for drywall, low speed fordecking

• Depth sensitive “set and forget”nosepiece for consistent fastenerdepth

• DEWALT® built high-performancemotor with fan cooling deliversmaximum power and durability

DC825KAHeavy-Duty 18V CordlessImpact Driver Kit• Compact size & weight allows access

into tighter areas and reduces userfatigue

• 1,330 in-lbs of max torque to perform awide range of fastening applications

• 0–2,400 rpm/0–2,700 ipm for fasterapplication speed

• Textured anti-slipcomfort grip providesmaximum comfort

• Durable magnesiumgear case and allmetal transmission forextended durability

• Heavy duty impactingmechanism directstorque to fastenerwithout kickback

Voltage 18VNo Load Speed 0–900/0–2,900 rpmMax. Torque 180 in-lbsCapacity (CRS) 12 ga.Tool Weight 5.1 lbsShipping Weight 12.3 lbsDrive Size 1/4" Hex in

D28605Heavy-Duty 1/2" Variable SpeedCement Shear• Powerful, 6.5 amp, all ball-bearing motor for

increased power and long life• Head swivels 360° for added cutting

convenience• Variable for increased user

control• Reversible dual cutting edge side

blades for longer cutting life andincreased productivity

• Replaceable center and sideblades for longer cutting life andincreased productivity

Amps 6.5 ampsMax Watts Out 800 WStrokes/Min 0–2,500 spmCapacity (Mild Steel) N/A ga.Capacity (Stainless Steel) N/A ga.Tool Length 9.1"Tool Weight 4.5 lbs

Voltage 18VDrive Size 1/4" hex shank quick release inNo Load Speed 0–2,400 rpmImpacts/Min 0–2,700 ipmMax. Torque 1,330 in-lbsMax. Torque 111 ft-lbsTool Weight 4.6 lbsTool Length 5-3/4"Shipping Weight 11.8 lbs

DC835KAHeavy-Duty 14.4V Cordless Impact Driver Kit• Compact size & weight allow access into tighter

areas and reduces user fatigue• 1,240 in-lbs of max torque to perform a wide range

of fastening applications• 0–2,400 rpm/0–2,700 ipm for faster application

speed• Textured anti-slip comfort

grip provides maximumcomfort

• Durable magnesium gearcase and all metaltransmission for extendeddurability

• Heavy duty impactingmechanism directs torqueto fastener without kickback

Voltage 14.4 VDrive Size 1/4" hex shank quick release inNo Load Speed 0–2,400 rpmImpacts/Min 0–2,700 ipmMax. Torque 1,240 in-lbsMax. Torque 103 ft-lbsTool Weight 3.9 lbsTool Length 5-3/4"Shipping Weight 10.46 lbs

DC830KAHeavy-Duty 1/2" (13mm) 14.4V Impact Wrench Kit• Frameless motor for extended tool durability and life• Compact size & weight allow access into tighter

areas and reduces user fatigue• 1,620 in-lbs of torque to perform a wide range of

fastening applications• 0–2,400 rpm/0–2,700 ipm for faster

application speed• Replaceable brushes for increased

serviceability• Textured anti-slip comfort grip provides

maximum comfort• Durable magnesium gear case and all

metal transmission for extended durability• Heavy-duty impacting mechanism directs torque to fastener without kickback

Voltage 14.4 VNo Load Speed 0–2,400 rpmImpacts/Minute 0–2,700 ipmMax. Torque 1,620 in-lbsTool Weight 3.9 lbsTool Length 5-3/4"Shipping Weight 10.46 lbs

DC9180CHeavy-Duty 1 Hour Charger And 18V Battery Pack With NANO™ Technology• DC9180 18V Battery Pack with NANO™ Technology is compatible with

DEWALT® 18 Volt tools• DEWALT® exclusive NANO™-phosphate lithium ion cells offer long battery life

& durability: 2,000 recharges• Lightweight design – 1.5 lbs; same weight as an 12V NiCd battery• No memory & virtually no self-discharge for maximum productivity & less

downtime• DC9310 Charger Charges all

DEWALT® 7.2V–18VNiCd/NiMH/Li-Ion batteries(except Univolt batteries) sousers need only one chargerfor multiple cordless products

Voltage 18VFeatures High performance battery packCompatible with Entire line of

DEWALT® 18 Volt toolsShipping Weight 3.3 LBS

002SS 5/19/10 3:20 PM Page 2

3

Power Tools

Cordless

COMPACT 1/2'' (13mm) 18VCordless Hammerdrill KitPart No. DC725KA• Compact size: Allows users to fit into tight spaces• Lightweight design (4.9 lbs.) minimizes user fatigue• 1/2'' single sleeve ratcheting chuck reduces bit

slippage• Dual speed range 0-500/0-1,700 rpm 0-8,500/

0-29,000 bpm delivers optimal performance• High performance frameless motor delivers maximum

power of 410 unit watts out• LED work light provides increased visibility in confined spacesTOOL SPECIFICATIONSMax RPM 1,700Max BPM 29,000

Heavy-Duty 1/2" (13mm) 28VCordless Hammerdrill/Drill/Driver with NANO™TechnologyPart No. DC910KL• DEWALT® built high power, high efficiency

motor delivers 650 unit watts out of max powerfor superior performance in all drilling andfastening applications

• DEWALT® exclusive NANO™-phosphate lithium ioncells offer long battery life & durability: 2,000 recharges

• Patented 3-speed all-metal transmission matches the speed to theapplication for optimal performance

• Heavy-duty 1/2" self-tightening chuck tightens throughout operationproviding superior bit gripping strength

• Enhanced durability and reliability to withstand the job-siteenvironment and the most demanding applications

• Anti-Slip comfort grip provides increased comfort and controlTOOL SPECIFICATIONSMax RPM 0-400/0-1,200/0-1,600Max BPM 0-6,800/0-20,400/0-27,200

18V 1/2" XRP™ Li-IonHammerdrill/Drill/DriverPart No. DCD970KL• XRP™ Nano Phosphate Li-Ion

extended run-time batteries providesuperior ergonomics, long run-time &battery life

• Patented 3-speed all-metaltransmission matches the tool to taskfor fastest application speed andimproved run time

• Heavy-duty 1/2" self-tightening chuck tightensthroughout operationproviding superior bitgripping strength

Heavy-Duty 1/2" (13mm) 36VCordless Hammerdrill/Drill/Driver Kit with NANO™ TechnologyPart No. DC900KL• DEWALT® built high power, high efficiency motor

delivers 750 unit watts out of max power forsuperior performance in all drilling and fasteningapplications

• DEWALT® exclusive NANO™-phosphate lithium ion cells offer longbattery life & durability: 2,000 recharges

• Patented 3-speed all-metal transmission matches the speed to theapplication for optimal performance

• Heavy-duty 1/2" self-tightening chuck tightens throughout operationproviding superior bit gripping strength

• Enhanced durability and reliability to withstand the job-siteenvironment and the most demanding applications

• Anti-Slip comfort grip provides increased comfort and controlTOOL SPECIFICATIONSMax RPM 0-400/0-1,200/0-1,600Max BPM 0-6,800/0-20,400/0-27,200

Heavy-Duty 1/4" (6.4mm) 18V ImpactDriver Kit with NANO™ TechnologyPart No. DC827KL• Frameless motor for extended tool durability and life• Compact size & weight allows access into tighter

areas and reduces user fatigue• 1,330 in-lbs of torque to perform a wide range of

fastening applications• 0-2,400 rpm/0-2,700 ipm for faster application speed• Replaceable brushes for increased serviceability• Textured anti-slip comfort grip provides maximum comfort and control• Durable magnesium gear case and all metal transmission for

extended durability• Heavy duty impacting mechanism directs torque to fastener without

kickback• DEWALT® exclusive NANO™-phosphate lithium ion cells offer long

battery life & durability: 2,000 rechargesTOOL SPECIFICATIONSImpacts/Min 0-2,700 bpmMax. Torque 1,330 in-lbs

Heavy-Duty 18V Cordless 7/8" SDS HammerPart No. DC212KA• Variable speed, reversing switch delivers

versatility in all applications• Factory-set clutch reduces sudden, high

torque reactions if bit jams• Electro-pneumatic hammer mechanism

for fast penetration and low vibration• 360° side handle for better control and ease of use in tight spaces• SHOCKS — Active Vibration Control signifcantly reduces vibration

and increases user comfort and productivity• Compact L-Shape Design allows access in tight spaces while

providing optimal balance for the user• 1.7 ft-lbs impact energy provides corded power without the cord• 18V high performance battery pack provides long run-time and

battery lifeTOOL SPECIFICATIONSBlows/Min 0-4,100 bpmConcrete Maximum 7/8"Concrete Optimum 5/32"–3/8"



003SS 5/19/10 3:21 PM Page 3

4

Power Tools

DC390KHeavy-Duty XRP™

18V Cordless Circular Saw Kit• 3,700 rpm for fast rip cuts and cross cuts• 6-1/2" carbide tipped blade for 2x cutting

capacity at 90° and 45°• High strength magnesium shoe and

upper guard provides increaseddurability

• 0-50° bevel capacity providesadditional capacity for a multitude ofapplications

• Fan-cooled motor with replaceablebrushes for maximum power anddurability

• XRP™ extended run-time batteryprovides long run-time and battery life

Voltage 18VNo Load Speed 3,700 rpmBlade Diameter 6-1/2"Bevel Capacity 0-50 DegreesArbor Size 5/8"Depth of Cut at 45° 1-5/8"Depth of Cut at 90° 2-1/4"Tool Weight 8.7 lbsShipping Weight 0 lbs

DCK455XHeavy-Duty XRP™ 18VCordless 4-ToolCombo Kit• DCD950 XRP™ 18V cordless

hammerdrill with patented 3-speedall-metal transmission and 1/2" self-tightening chuck delivers 450 unitswatts out of maximum performance,faster application speed, and superiorbit retention

• DC825 18V Impact Driver delivers 1,330 in-lbs of torque and 0–2,400 rpmsoffering power and speed to perform a wide range of fastening applications atfaster speeds

• DC385 18V reciprocating saw with 4-position keyless blade clamp allows forquick blade change without touching blade or reciprocating shaft

• DW919 18V flexible floodlight provides hands-free use

DCK251XHeavy-Duty XRP™ 18VHammerdrill /Reciprocating SawCombo Kit• DCD950 XRP™ 18V cordless


• DC385 XRP™ 18V cordless reciprocating saw with keyless blade clamp allowsfor quick blade change without touching blade or reciprocating shaft

Voltage 18VNumber of tools in kit 2Shipping Weight 20.7 lbs

Voltage 18VNumber of tools in kit 4Shipping Weight 24 lbs

DCK450XHeavy-Duty XRP™ 18VCordless 4-ToolCombo Kit• DCD950 XRP™ 18V cordless


• DC390 XRP™ 18V circular saw with6-1/2" carbide blade and rip fence can cut 2x4's at a 45° angle in a single pass


• DW919 18V flexible floodlight provides hands-free use


DCK550XHeavy-Duty XRP™ 18V Cordless 5-ToolCombo Kit• DCD950 XRP™ 18V cordless


• DC390 XRP™ 18V circular saw with6-1/2" carbide blade and rip fence can cut 2x4's at a 45° angle in a single pass


• DC330 XRP™ 18V variable speed jig saw with all metal lever action keylessblade change

• DW919 18V flexible floodlight for hands-free use


DCK255XHeavy-Duty XRP™ 18VHammerdrill/ImpactDriver Combo Kit• DCD950 XRP™ 18V cordless

hammerdrill with patented 3-speedall-metal transmission and 1/2" self-tightening chuck delivers 450units watts out of maximumperformance, faster applicationspeed, and superior bit retention

• DC827 18V Impact Driver delivers 1,330 in-lbs of torque and 0–2,400 rpmsoffering power and speed to perform a wide range of fastening applications atfaster speeds


18V Cordless

004SS 5/19/10 3:21 PM Page 4

5

Power Tools

Cordless

DCK655XHeavy-Duty XRP™ 18VCordless 6-Tool Combo Kit• DCD950 XRP™ 18V cordless hammerdrill

with patented 3-speed all-metal transmissionand 1/2" self-tightening chuck delivers450 units watts out of maximumperformance, faster application speed,and superior bit retention

• DC390 XRP™ 18V circular saw with 6-1/2" carbide blade and rip fence can cut2x4's at a 45° angle in a single pass


• DC825 18V impact driver with 1,330 in-lbs of maximum torque• DC411 18V cut-off tool with 6,500 rpm provides high power for cutting and

grinding applications• DW919 18V flexible floodlight provides hands-free useIncludesDCD950 XRP™ 1/2" 18V, hammerdrill/drill/driver; DC390 XRP™ 18V circularsaw; DC385 XRP™ 18V reciprocating saw; DC825 18V impact driver; DC41118V cut-off tool

DC385KHeavy-Duty XRP™

18V Cordless ReciprocatingSaw Kit• 1-1/8" stroke length for faster cutting

speed• 0-3,000 spm for faster cutting speed• 4-position blade clamp allows for

flush cutting and increased verstility• Lever-action keyless blade clamp for

quick and easy blade changes• Anti-slip comfort grip provides increased comfort and control• XRP™ extended run-time battery provides long run-time & battery life• Pivoting adjustable shoe with open top for maximum visibility• Variable speed with trigger lock for increased blade control

DC330KHeavy-Duty XRP™ 18V Cordless JigSaw Kit with Keyless Blade Change• All-metal lever-action keyless blade change allows for

quick and easy blade changes• All-metal keyless shoe bevel with detents

at 0°, 15°, 30° and 45° provides versatilityfor easy bevel cutting

• 4-position orbital action provides controlof cut quality and speed

• Adjustable dust blower keeps line of cutclear of chips

• Variable speed 0-3,000 spm for versatilityin a multitude of materials and applications

• XRP™ extended run-time battery provides long run-time & battery life• Anti-slip comfort grip for increased comfort and control

Voltage 18VStrokes/Min 0-3,000 spmStroke Length 1"Keyless Blade Clamp YesDust Blower YesTool Weight 7.5 lbsShipping Weight 12.5 lbs

Voltage 18VKeyless Blade Clamp YesStrokes/Min 0,3000 spmStroke Length 1-1/8"Electric Brake YesTool Weight 8.2 lbsShipping Weight 13 lbs


DW966K-2Heavy-Duty 3/8" (10mm) 14.4V CordlessRight Angle Drill/Driver Kit• 2 speed ranges 0-400/0-1,250 rpm for increased user

flexibility providing a wide range of applications• 210 unit watts out of maximum power for heavy-duty

applications such as turning large bits and fasteners• Multi-grip trigger provides comfort

and convenience by allowing the userto get into tighter spaces while stillhaving access to the trigger

• Variable speed and reversing givesthe user the ability to control speed

• Durable, right angle transmissionwith sealed ball bearing for a longertool life

Voltage 14.4VMax Power 210 UWOChuck Size 3/8"# of Speed Settings 2RPM 0-400/0-1,250Chuck type Pastic, 2-sleeveTool Weight 4.4 lbs.Shipping Weight 8.2 lbs

DW979K-2Heavy-Duty 12V CordlessDrywall/Deck ScrewdriverKit• Dual speed ranges (0-800/0-2,300 rpm);

high speed for drywall, low speed fordecking

• Depth sensitive “set and forget”nosepiece for consistent fastenerdepth

• DEWALT built high-performancemotor with fan cooling deliversmaximum power and durability

Voltage 12VNo Load Speed 0-800/0-2,300 rpmMax. Torque 180 in-lbsCapactiy (CRS) 12 ga.Tool Weight 4.2 lbsShipping Weight 8.9 lbsDrive Size 1/4" Hex in

DC550KAHeavy-Duty 18V Cordless Cut-Out Tool• Tool-free bit change for fast and easy bit changing without a

wrench• 26,000 rpm motor provides more cutting power• Dust sealed switch

provides durabilityand long switch life

Voltage 18VNo Load Speed 26,000 rpmCollet Diameter 1/4", 1/8" inAdjustable Guide YesTool Weight 4.5 lbsShipping Weight 12.0 lbs

005SS 5/19/10 3:21 PM Page 5

6

Power Tools

Cordless

DC545K18V Cordless AdhesiveDispenser 10 oz• 360° rotateable cartridge holder

fits 10 oz, 1/10 gal, and 300 ml and310 ml cartridges

• Tool delivers up to 650 poundspushing force to dispense thehighest viscosity adhesives andsealants

• Auto-reverse feature helps reducedrips, waste, and clean-up

• Set-and-Forget variable speedcontrol for consistent flow ratesand bead control

Voltage 18VCapacity 10 oz, 1/10 gal, &

300 ml-310ml cartridgesWeight 6.85 lbsMax Speed 25 in/min

DC500Heavy-Duty 2 GallonCordless or CordedWet/Dry Vac• Runs off of 12V–18V DEWALT battery

packs or 120V AC• Gore™ wet/dry filter traps 99.7% of

drywall dust• Wet/Dry filter eliminates change overs• Washable filter-tap or water rinse to

clean• Heavy-duty rubber hose provides

durability and flexibility• Drain port on tank for easy emptying

of liquids• On-board hose, cord and accessory storage provides convenient transport

and storage

DC547K18V Cordless AdhesiveDispenser• 360° rotateable cartridge holder fits

29 oz, and quart size cartridges• Tool delivers up to 650 pounds

pushing force to dispense the highestviscosity adhesives and sealants


• Set-and-Forget variable speed controlfor consistent flow rates and beadcontrol

Voltage 18VCapacity 300 ml & 600 ml

sausage packsWeight 7.00 lbsMax Speed 25 in/min

Tank Size 2 galHose Diameter 1-1/4"Hose Length 5'Voltage (DC Operation) 12–18 VBlower YesTool Weight 7.2 lbsShipping Weight 10.5 lbs

DC011Heavy-DutyWorksiteRadio/Charger• 1 hour charger for 7.2V to

18V DEWALT battery packs(except Univolt®)

• AM/FM Digital Turner withLCD display, built-in clock,and 8 station memorypresets

• Runs off of 7.6V to 18VDEWALT batteries makingit a cordless radio

• Auxiliary port allows connection to CD Players, MP3 Players, and portablesatellite receivers with an audio cable (cable not included)

• High efficiency weather resistant speakers with dual bass ports for maximumbass and range

• Dual pivoting 11" flexible antenna provides more durability and betterreception

• Weather sealed charger door opens easily for fast battery changes• The DEWALT 3-stage charging system provides maximum run-time and

extends overall life of the battery

Voltage 7.2 to 18 (except Univolt) VRadio Output 92 dBCharge Time 1 hr or lessTool Weight 13.2 lbsShipping Weight 13.2 lbs

DC022Heavy-Duty Cordless/CordedWorklight/Dual Port Chargerwith GFCI Protection• Cordless/corded 38W Fluorescent

worklight runs on 12–18V DEWALTbatteries or AC power and providesarea lighting without the extreme heat of halogen

• 1 hour dual port battery charger charges (2) DEWALT 7.2–18V batteries inone hour or less

• (3) GFCI protected power outlets offers more versatility for jobsite power

DC546K18V Cordless AdhesiveDispenser—29 oz.• 360° rotateable cartridge holder fits

29 oz, and quart size cartridges• Tool delivers up to 650 pounds

pushing force to dispense thehighest viscosity adhesives andsealants


• Set-and-Forget variable speedcontrol for consistent flow rates andbead control

Voltage 18VCapacity 29 oz, & quart size

cartridgesWeight 7.75 lbsMax Speed 25 in/min

006SS 5/19/10 3:21 PM Page 6

7

Power Tools

• LXT Lithium-Ion batteryand optimum chargingsystem produces 430%total lifetime work with2.5x more cycles

• Makita-built 4-pole motordelivers 560 in.lbs. ofmaximum torque

• 2-Speed all metaltransmission (0-400 / 0-1,700 RPM) covers awide range of drilling,driving and hammer applications

• Shift-Lock drive system quickly shifts between modes• Compact design at only 9-9/16" long and weighs only

4.9 lbs for reduced operator fatigue

3561414.4V Brute Tough™ 1/2" Cordless Drill/Driver• 3x longer life than previous generation• Increased durability and grip force• Durashield™ Housing• 50 in.-lbs more torque, 200 RPM faster,

than previous generation• 1/2" Metal Chuck• High torque mode produces over

550 in.-lbs. (Dynamic Torque)• High speed mode produces 1,700 RPM• High Strength Metal Collar• 25 Position Clutch• Variable speed trigger• Externally Accessible Brushes

CPK50-1818V 5-Piece Cordless Combo Kit

BDF45118V LXT Lithium-Ion 1/2" Driver-Drill Kit

BTD14118V LXT Lithium-IonCordless Impact Driver Kit

• LXT Lithium-Ion batteryand optimum chargingsystem produces 280%total lifetime work with2x more cycles

• Makita built, 4-polemaximum torque motor

• Compact design at only9-3/8" length and weighsonly 4.6 lbs.

Capacities:Steel 1/2"Wood 2-9/16" No load speed Low: 0–300 rpm

Mid: 0–600 rpmHigh: 0–1,700 rpm

Torque (in.-lbs.) 560Battery (Ah) 3.0

Capacities:Steel 1/2"Wood 2-9/16" Masonry 5/8"No load speed Low: 0–400 rpm

High: 0–1,700 rpmBlows/Min.(BPM)

Low 0-6,000High 0-22,500

Torque (in.-lbs.) 560Battery (Ah) 3.0Length 9-9/16"Net weight (lbs. w/battery) 4.9

Includes• 18V Brute Tough™

Drill/Driver• 18V IMPACTOR™

Fastening Driver• 18V 6-1/2" Circular Saw• 18V Reciprocating

Saw• 18V Flashlight• 2.4A-h Batteries• 30-Minute Dual Bay Charger• Bi-Metal Recip Blades• Double-ended Phillips Bit • Side Handle• Magnetic Bit Holder • Phillips Bit• Circular Saw Blade • Carrying Bag

• LXT Lithium-Ion batteryand optimum chargingsystem produces 280%total lifetime work with2x more cycles

• Makita built, 4-polemaximum torque motor

• 50% more compactdesign at only 5-3/4"long and weighs only 3.3 lbs.

Hex Shank 1/4No Load RPM 0–2,300Impacts/Min.(IPM) 0–3,200Torque (in.-lbs.) 1,280Watt Hours 54.0Battery (Ah) 3.0 (Li-Ion)Length 5–3/4"Net Weight (lbs. w/battery) 3.3Shipping Weight (lbs.) 12.35

3561818V Brute Tough™ 1/2" Cordless Drill/Driver• 3x longer life than previous generation• Increased durability and grip force• Durashield™ Housing• 50 in.-lbs more torque, 500 RPM

faster, than previous generation• 1/2" Metal Chuck• High torque mode produces over

600 in.-lbs. (Dynamic Torque)• High speed mode produces 1,800 RPM• High Strength Metal Collar• 25 Position Clutch• Variable speed trigger• Externally Accessible Brushes

CORDLESS

BHP45418V LXT Lithium-Ion 1/2" Hammer Driver-Drill Kit

007SS 5/19/10 3:21 PM Page 7

8

Power Tools

6349DWDE18V Cordless 1/2" Driver-Drill Kit• Two-piece ND-31 motor with dual ball

bearing for longer motor life• Delivers up to 560 in.-lbs. of

maximum torque• Shift-Lock™ drive system quickly

shifts from “drill” to “driver” modewith one touch

• Powerful 18V (2.6Ah) Ni-MH battery• Ergonomic rubberized grip for comfort

and control• Exclusive refined rare earth magnet

produces maximum power• Two-piece armature and field allows

greater serviceability

CORDLESS TOOLS

Capacity Steel 1/2"No Load RPM

Low 0–300Mid 0–600High 0–1,700

Torque (in.-lbs.) 560Battery (Ah) 2.6Length 9–7/8"

BSS50118V LXT Lithium-IonCordless 5-3/8” CircularTrim Saw Kit• 2" maximum cutting capacity enables

cutting a 2 x 4 in one pass• Built-in L.E.D. lights for more

illuminated work• Built-in dust blower enhances line of

sight and keeps work piece clean• Makita’s 25 Minute Optimum Rapid

Charger (DC18RA) charges faster toallow less down time and moreproductivity

• Ergonomically designed handle withsoft grip provides better fit and evenmore control

• Blade wrench stows away in the sawfor fast and convenient blade changing

SpecificationsBlade Diameter 5-3/8"Blade Type TCT Saw BladeNumber of Blade Teeth 16Arbor 5/8"Cutting Capacity @90° 2"

@45° 1-3/8"No Load 3,600 RPMBevel Capacity 0°–50°Battery 18 VDC (3.0 Ah)

6935FDWDEX14.4V Cordless ImpactDriver, Variable Speed• Powerful efficient impacting 103.3

ft.lbs. (1,240 in.lbs.) for industrialapplications

• Efficient impacts per minute (0–3,200 IPM)

• Impact resistant magnesium alloy gearcase provides increased durability

• True variable speed for smoothincrease in speed and completecontrol to match all applications

• Powerful (2.6Ah) Ni-MH batteries havegreater capacity and longer run timethan any Ni-Cd battery

• Two-piece D-28R motor with dual ballbearings and externally accessiblebrushes for longer tool life

Capacity bit-shank 1/4"No Load RPM 0–2,600Impacts/Min. (IPM) 0–3,200Torque (in.-lbs.) 1,240 (103.3 ft.-lbs.)Battery (Ah) 2.6Length 6-3/8

5093DWD12V 3-3/8" CordlessCircular Saw Kit• Adjustable cutting depth

with easy to read depthgauge on blade housing

• Lock-off lever is convenientlylocated

• Shaft lock for easy blade changes• Cuts up to 15/16" at 90° bevel

cuts 0°–45°

SpecificationsBlade Diameter 3-3/8"Arbor 15mmMax. Cutting Depth 45° 11/16"

90° 15/16"No Load RPM 1,000Watt Hours 31.2Battery (Ah) 2.6Length 12-1/2"Net Weight (lbs. w/battery) 4.2Shipping Weight (lbs.) 9.4

BGA45218V LXT Lithium-Ion CordlessCut-Off/AngleGrinder Kit

• Makita built produces 50%faster grinding with an impressive10,000 RPM

• More compact design at only 12-1/2" long and weighs only 5.6 lbs. for less operator fatigue

• Ergonomic shape fits like a glovewith even pressure and easycontrol

• LXT Lithium-Ion provides longerrun time, 5x lower self-discharge (for use any time) and 16 firmholding contact terminals (for constant high power)

SpecificationsGrinding Wheel 4-1/2"Cut-Off Wheel 4-1/2"Wire Cup Brush 3-1/2"Sanding Disc 4-1/2"No Load RPM 10,000Watt Hours 54.0Battery 18VDC (3.0Ah)Spindle Thread 5/8"-11 UNCOverall Length 12-1/2"

8444DWDEDrill Kit• Two-piece ND-31 motor with dual

ball bearing for longer motor life• 16 torque settings• Delivers up to 560 in.lbs. of

maximum torque• Shift-Lock™ drive system quickly

shifts from “hammer drill” to“driver” mode with one touch

• Powerful 18V (2.6Ah) Ni-MHbattery

• Ergonomic rubberized grip forcomfort and control

• Exclusive refined rare earthmagnet produces maximumpower

• Two-piece armature and fieldallows greater serviceability

• Makita built all metal gears formaximum durability

Capacity Steel 1/2"Masonry 5/8"

No Load Speed (RPM) 1st 0–3002nd 0–6003rd 0–1,700

Blows per minute (BPM) 1st 0–4,0002nd 0–9,0003rd 0–25,500

Maximum Torque 560 in-lb/63N•m

Watt Hours 46.8Battery 18VDC (2.6Ah)Overall Length 10-3/8"Net Weight (lbs. w/battery) 6.0Shipping Weight (lbs.) 14.7

008SS 5/19/10 3:22 PM Page 8

9

Power Tools

CORDLESS TOOLSBTD142HW18V Compact Lithium-IonCordless Impact Driver Kit• Makita built, 4-pole maximum torque

motor delivers 1,280 in. lbs. ofefficient torque in a compact size

• More compact design at only 5-3/4"long and weighs only 2.8 lbs. for lessoperator fatigue

• Batteries charge 4X faster in only 15minutes

• Ergonomic shape fits like a glove witheven pressure and easy control

• Makita Lithium-Ion provides longerrun time, 5x lower self-discharge (foruse any time) & 16 firm holdingcontact terminals (for constant high power)

CapacityHex Shank 1/4"

No Load RPM 0–2,300Impacts/Min.(IPM) 0–3,200Torque (in.-lbs.) 1,280Battery 18V DC 1.5Ah & 3.0AhLength 5-3/4"Net Weight 2.8 lbs.Shipping Weight 11.0 lbs.

BTW25118V LXT Lithium-IonCordless 1/2" ImpactWrench Kit• More compact design at only 6.5" long

and weighs only 3.7 lbs. for lessoperator fatigue

• Batteries charge 2X faster in only25 minutes


• Makita Lithium-Ion provideslonger run time, 5x lower self-discharge (for use any time) &16 firm holding contactterminals (for constant high power)

Capacity Square Drive 1/2"No Load RPM 0–2,100Impacts/Min.(IPM) 0–3,200Torque (in.-lbs.) 2040Watt Hours 54.0Battery (Ah) 3.0Length 6-1/2"Net Weight (lbs. w/battery) 3.7

BDF452HW18V CompactLithium-Ion Cordless1/2" Driver Drill Kit• Makita built, 4-pole maximum

torque motor delivers 450 in. lbs. of efficient torque in a compact size

• More compact design at only 8” long and weighs only 3.5 lbs.for less operator fatigue

• Batteries charge 4X faster in only15 minutes


Capacity Steel 1/2"Wood 1-1/2"

No Load RPM Low 0–450High 0–1,500

Torque (in.-lbs.) 450Watt Hours 27.0Battery (Ah) 1.5 (Li Ion)Accepts(Ah) 3.0 (Li Ion)Length 8"Net Weight (lbs. w/battery) 3.5

BJV18018V LXT Lithium-IonCordless Jig Saw Kit• 4-Pole Position cut settings (3

Orbital and 1 Straight) for fastand efficient cutting in allapplications

• Built-in L.E.D. lights for moreilluminated work

• “Tool-less” push-in locksystem for extremely fast bladeinstallation and removal

• Large variable speed triggerallows for total cutting control(0-2,600 SPM)

• LXT Lithium-Ion provideslonger run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (forconstant high power)

Length of stroke 1"Max. Cutting Capacity Wood 5-5/16"

Steel 3/8"Cut Settings 3 Orbital +

Straight CuttingStrokes/Min. 0–2,600 SPMBevel Capacity 45°Lithium-Ion Battery 18VDC (3.0 Ah)Length 10-1/8"Net Weight 6.1 lbs.(w/battery)

LXT118 Volt LXT 2 PieceCombo Kit, (HammerDriver-Drill andReciprocal Saw)Hammer Driver-Drill:• 3-Speed design produces 25%

faster working speed with moreefficiency in a wider range ofapplications

Reciprocating Saw:• Compact design at only 19-5/8"

length and weighs only 8.1 lbs.for less operator fatigue

Includes:Hammer Driver-Drill BHP451Reciprocating Saw BJR181X145-minute optimum charger DC18SCLXT Lithium-Ion 3.0Ah batteries 194205-3BladeScrewdriver bits 784637-8Tool caseShipping Weight (lbs.) 27

BMR100W18V LXT Lithium-IonCordless FM/AM JobSite Radio• More compact design and weighs

9.2 lbs.• Delivers rich stereo sound from two

powerful 3.25" side-firing drivers• Rugged weather resistant design

for jobsite conditions• Digital backlit quartz display• 10 Pre-Set FM/AM buttons and

mp3 compatible• Dual Volume and Tuning Dial or

easy control• Protective bumper design for

added durability• Compatible with Slide Type and

Pod Style Makita Batteries

Voltage 24–9.6Digital Tuner FM/AMBacklit LCD Display YesClock YesMemory Preset 5 FM/ 5 AMWeather Resistant YesMP3 Compatibility YesPower Souce Compatibility All Slide

Type & Pod Style BatteriesOverall Length (L x W x H) 10.25" x 6.5" x 12"Shipping Weight (lbs.) 14.30

009SS 5/19/10 3:22 PM Page 9

10

Power Tools

CORDLESS TOOLS

POWER TOOLS

BSS61018V 6-1/2" LXT Lithium-IonCircular Saw Kit• Makita built, D35 high torque motor

delivers maximum power for cutting 2xmaterial at 45° with 50° maximumcapacity

• Compact design at only 13-5/8" lengthand weighs only 7.1 lbs. for lessoperator fatigue


• LXT Lithium-Ion provides longer runtime, 5x lower self-discharge (for useany time) and 16 firm holding contactterminals (for constant high power)

Blade Diameter 6-1/2"Arbor 5-8"No Load RPM 3,700Max. Cutting Depth 90° 2-1/4"

45° 1-9/16"50° 1-7/16"

Watt Hours 54.0Battery (Ah) 3.0Length 13-5/8"Net Weight (lbs. w/battery) 7.1Shipping Weight (lbs.) 18.96

BJR18118V LXT Lithium-IonRecipro Saw• Makita built, D35 high torque motor

delivers 50% faster cutting with a 1-1/8" stroke that cuts 2,900 SPM

• Compact design at only 19-5/8" lengthand weighs only 8.1 lbs. for lessoperator fatigue


• LXT Lithium-Ion provides longer runtime, 5x lower self-discharge (for useany time) and 16 firm holding contactterminals (for constant high power)

Max. Cutting DepthPipe 5-1/8"Wood (w/12" blade) 10"

Length of stroke 1-1/8"Strokes/Min.(SPM) 0–2,900Watt Hours 54.0Battery (Ah) 3.0Length 19-5/8"Shipping Weight (lbs.) 17.70

LXT60118V LXT Lithium-Ion 6-Pc. Combo Kit• 1/2" Hammer Driver-Drill

has a new 4-pole motor for 450 in. lbs. of torque andweighs only 3.9 lbs.

• 6-1/2" Circular Saw has a D35high torque motor that deliversmaximum power for cutting 2x material at 45° and is only6.9 lbs.

• Reciprocating Saw with tool-less blade changes & shoeadjustments at only 8.1 lbs.

Includes:18V 1/2" LXT Hammer Driver-Drill BHP45218V 6-1/2" LXT Circular Saw BSS61118V LXT Recipro Saw BJR18218V LXT Impact Driver BTD14118V LXT 4-1/2" Cut-Off/Angle Grinder BGA45218V LXT Flashlight BML185Shipping Weight (lbs.) 44.0

DA312DWD12V 3/8" Cordless AngleDrill Kit (Variable Speed,Reversible)• Compact design ideal for close quarter

drilling and driving; measures only 4-1/8" from tip of the chuck to the topof the tool body

• 3/8" keyless chuck for fast and easy bitinstallation and removal

• Variable speed trigger for precisespeed control (0–800 RPM) in alldrilling and driving applications

• Conveniently located forward/reverseswitch above the trigger

• Electric brake stops the chuck quickly

Capacity Steel 3/8"Wood 3/8"

No Load RPM 0–800Torque (in.-lbs.) 44Watt Hours 31.2Battery (Ah) 2.6Tool Width 4-1/8"Length 12-3/4"Net Weight (lbs. w/battery) 3.5Shipping Weight (lbs.) 8.0

41317-1/4" Metal Cutting Saw• CERMET Tipped blades are made with

a special Ceramic-Metal mixture thatresists heat which can shorten the lifeof traditional carbide-tipped blades

• Fast, effortless cutting through singleor multiple metal pieces with burr-freeends that are cool to the touch

• Virtually spark-free cuts• Heavy-duty blade cover for efficient

chip collection for increasedperformance

• “Tool-less” blade cover removal andchip collection window for operatorconvenience

• Quick release blade guard lever for plunge cutting• Stainless steel base plate for stability and durability

Blade diameter 7-1/4"Arbor 5/8"Max. cutting capacities: 90° 2-1/2"No Load RPM 3,500AMPS 13.0Overall length 11"Net weight (lbs.) 10.6Shipping Weight (lbs.) 10.4

LC123012" Metal Cutting Saw• Powerful 15 AMP motor• D-shape handle for easy gripping• Long lasting carbide tipped blade for

cost efficient, clean and accuratecutting; virtually burr free

• Lock-off button prevents accidentalstarting

• “Tool-less” guide plate adjusts 0–45°for quick and easy miter cutting

• Quick release vise for secure stockretention and fast repeated cut-offs

• Socket wrench stores on base forconvenient blade changes

• Shaft lock for easy blade changes withjust one wrench

• Shavings collection tray for easy wastedisposal and a cleaner work environment

Blade diameter 12"Arbor 1"Max. cutting capacities: 90° 4-1/2"

45° 3-1/2"No Load RPM 1,300AMPS 15.0Overall length 20-1/4"Net Weight (lbs.) 41.9Shipping Weight (lbs.) 50.10

010SS 5/19/10 3:23 PM Page 10

11

Accessories & Supplies

POWER TOOL BATTERIESBattery Packs

Part No. DescriptionDC9096 18 V BatteryDC9091 14.4 V BatteryDC9360 36 V BatteryDC9180 18 V Li-Ion Battery

Battery Chargers

Part No. DescriptionDC9310 1 Hour ChargerDW9117 15 Min. ChargerDW9109 Vehicle ChargerDC9000 36/28 V Charger

Part No. DescriptionBAT181 18 V BatteryBAT140 14.4 V Battery

Cordless Battery

Battery PackPart No. DescriptionBC004 1 Hour Charger

One Hour Charger

Part No. DescriptionDC1804 Universal Battery ChargerDC1822 Auto ChargerDC18RA Li-ion ChargerDC18SE Li-ion Auto

MAKSTAR™ ChargerPart No. Description193159-1 18 V Battery193158-3 14.4 Volt193157-5 12 V Battery192696-2 9.6 V Battery

Li-Ion Batteries

Part No. DescriptionBL1830 3.0 AH Battery, 18 VoltBL1815 1.5 AH Battery, 18 Volt

011SS 5/19/10 3:23 PM Page 11

12

Power Tools

DW252/DW255Heavy-Duty VSR DrywallScrewdriver• Depth-sensitive “set and forget”

nosepiece for consistentfastener depth

• Two-finger trigger for increasedcomfort

• Hi-speed transmission forproduction drywall hanging

• Lightweight with excellentergonomics

• Helical-cut, heat-treated gearsfor long life and durability

DW269Heavy-Duty VSR VERSA-CLUTCH®

Screwdriver

DW276Heavy-Duty VSRDrywall/FramingScrewdriver

PS20-212V Driver™

Amps 6.0No Load Speed 0–4,000 rpmClutch StandardTorque 60 in-lbsMax Fastener Size #8Tool Weight 2.8 lbs

• Helical-cut steel, heat-treatedgears for long life and durability

• High torque for deck buildingand heavy gauge steel studframing

• Metal gear housing forincreased durability

• Depth sensitive, “set and forget”nosepiece for consistentfastener depth

• Rubber grip and two-fingertrigger for increased comfort

• Excellent ergonomics


• Helical-cut steel, heat-treatedgears for long life and durability

• High power motor for metalfastening applications

• VERSA-CLUTCH® torqueadjustment system

• Rubber-grip and two-fingertrigger for increased comfort

• Metal nose and gear case fordurability on the job

• Excellent ergonomics offers lessuser fatigue

Amps 6.5No Load Speed 0–1,000 rpmClutch Versa-Clutch®

Torque 344 in-lbsMax Fastener Size #14Tool Weight 3.7 lbs

• 80 in.-lbs. of Torque • Ultra-Compact Power & Design • LED Light • Forward/Reverse Button • Quick Change Chuck • 10+1 Clutch • Variable Speed Trigger

PS40-210.8V Litheon™ Impactor™Fastening Driver• Produces 800 in.-lbs of torque and

delivers 1,800 RPM/3,000 BPM• LED Light Ring – 3 LEDs illuminate

work area for use in dark areas• Spring-loaded impact mechanism –

Reduces user fatigue• Aluminum gear housing with protective

rubber front• 1/4" hex drive with quick release

Carrying Case Included

Rating 10.8VNo Load RPM 0–1,800No Load BPM 0–3,000Torque (in. lbs.) 800Length (in.) 6-1/2"Weight (lbs.) 1.83

No Load RPM 0–500Torque (in. lbs.) 80Weight (lbs.) 1.8Rating 12VLength 6-1/2"

DW272Heavy-Duty VSRDrywall Screwdriver• Metal gear housing for

increased durability• Depth sensitive “set and forget”

nosepiece for consistentfastener depth

• Rubber grip and two-fingertrigger for increased comfort

• Helical-cut steel, heat-treatedsteel gears for long life anddurability

• Lightweight with excellentergonomics


FASTENING

012SS 5/19/10 3:23 PM Page 12

13

Power Tools

FASTENING

DWD112Heavy-Duty 3/8" VSR PistolGrip Drill with Keyless Chuck

DWD115K3/8" VSR Mid-handle Drill Kit with Keyless Chuck

6824NDrywall ScrewdriverVariable Speed, Reversible

• 8.0 Amp motor delivers highperformance in heavy-dutyapplications

• 3/8" all-metal ratcheting keylesschuck for greater bit retention

• 0-2,500 RPM, VSR trigger forversatility in drilling and fasteningapplications

• Mid-handle grip design with softgrip offers increased balance andcomfort

• All ball-bearing constructionprovides greater durability andlonger tool life

Keyless Chuck YesChuck Size 3/8"No Load Speed 0–2,500 rpmAmps 8.0Max. Watts Out 650WGear Reduction SingleCapacity In Wood (Spade Bit) 1"Capacity In Wood (Self-Feed) N/ACapacity In Wood (Hole Saw)1-1/8"Includes: heavy-duty kit box

• 7.0 Amp motor delivers highperformance in heavy-dutyapplications

• 3/8" all-metal ratcheting keylesschuck for greater bit retention

• 0-2,500 RPM, VSR trigger forversatility in drilling and fasteningapplications

• Soft grip handle design offersincreased gripping surface andcomfort

• All ball-bearing constructionprovides greater durability andlonger tool life

Keyless Chuck YesChuck Size 3/8"No Load Speed 0–2,500 rpmAmps 7.0Max. Watts Out 650WGear Reduction SingleCapacity In Wood (Spade Bit) 1"Capacity In Wood (Self-Feed) N/ACapacity In Wood (Hole Saw) 1-1/8"Capacity In Wood (Auger Bit) N/ACapacity In Steel (Twist Bit) 3/8"Capacity In Steel (Hole Saw) N/A

• Adjustable depth locatorassembly Bit shank 1/4" (6.35 mm) Hex

No load speed 0–4,500 rpmAMPS (115V) 6.5Overall length 11-3/8" (290 mm)Includes: 1 ea. phillips insert bit,Magnetic bit holder, Nose piece

DW268Heavy-Duty VSR VERSA-CLUTCH®

Screwdriver• Helical-cut steel, heat-treated

gears for long life and durability• High power motor for metal

fastening applications• VERSA-CLUTCH® torque

adjustment system to “dial” theproper torque needed toefficiently drive fasteners withoutstripping or breaking fastener

• Rubber-grip and two-fingertrigger for increased comfort

• Metal nose and gear case fordurability on the job

• Excellent ergonomics offers lessuser fatigue

Amps 6.5No Load Speed 0–2,500 rpmClutch VERSA-CLUTCH® SystemTorque 132 in-lbsMax Fastener Size #14Tool Weight 3.7 lbs

DW130VHeavy-Duty 1/2" (13mm)Spade Handle Drill• Variable speed reversing

switch avoids air bubbles whenmixing mud and offers greatercontrol when drilling

• 0-550 RPM provides increasedtorque for drilling and mudmixing

• 9.0 AMPS, 120V motor • 7.5 lbs. (3.4 kg) increases user

productivity and decreasesuser fatigue

• Soft grip handle providessuperior comfort andergonomics

• 2-position rear spade handleand 3-position side handlegives greater control for alldrilling and mixing applications

Chuck Size 1/2"No Load Speed 0-550 rpmMax Watts Out 600 WGear Reduction TripleCapacity In Wood (Spade Bit) 1-1/2"Capacity In Wood (Self-Feed)2-9/16"Capacity In Wood (Hole Saw) 5"Capacity In Wood (Auger Bit) 1-1/2"Capacity In Steel (Twist Bit) 1/2"Capacity In Steel (Hole Saw) 3"

DRILLS

SG45Drywall Screwgun• 6.2 Amps• Plastic Gear Housing• 10.9" Long• 0–4,500 rpm No Load Speed• Plastic/Metal Tip Nose Piece• 120V• 70 in-lbs Torque• 2.6 lbs

SG45MDrywall Screwgun• 7.0 Amps• Metal Gear Housing• 10.9" Long• 0–4,500 rpm No Load Speed• Metal Nose Piece• 120V• 101 in-lbs Torque• 2.95 lbs

013SS 5/19/10 3:24 PM Page 13

14

Power Tools

DW124KHeavy-Duty 1/2" (13mm)Stud & Joist Drill Kit• 100% ball-bearing

construction providesdurability and longer tool life

• Mechanical-slip clutch in lowgear to prevent bit lock-upand to provide control ofreactionary torque

• Adjustable front handle and2-position side handleprovide maximum leverageand control

• Mechanically controlled 2-speed to match RPM/torqueto application requirement

• Triple gear reductionprovides increased torqueand reduces gear stress

DW235GHeavy-Duty 1/2" (13mm)VSR Drill (0–850 RPM)

0233-203/8" Magnum® Drill0–2800 RPMwith Keyless Chuck

1610-1/1630-11660-6Compact Drills andSuper Hole-ShooterFeatures

Chuck Size 1/2"No Load Speed 300/1,200 rpmAmps 11.5Max. Watts Out 850WGear Reduction TripleCapacity In Wood (Spade Bit) 1-1/2"Capacity In Wood (Self-Feed) 4-5/8"Capacity In Wood (Hole Saw) 6"Capacity In Wood (Auger Bit) 1-1/2"Capacity In Steel (Twist Bit) 1/2"Includes: chuck key with holder, 2-position side handle, bail handleand heavy-duty kit box

• Helical-cut steel, heat-treated gears forincreased durability andlong gear life

• Metal gear housing forjobsite durability andincreased reliability

• Two-finger trigger forincreased comfort

• 360° side handle forgreater control andversatility

Keyless Chuck N/AChuck Size 1/2"No Load Speed 0-850 rpmAmps 7.8Max. Watts Out 600WGear Reduction DoubleCapacity In Wood (Spade Bit) 1-1/2"Capacity In Wood (Self-Feed) 2-1/8"Capacity In Wood (Hole Saw) 3-1/2"Capacity In Wood (Auger Bit) 1-1/8"Capacity In Steel (Twist Bit) 1/2"Capacity in Steel (Hole Saw) 1-1/2"Includes: 360° side handle andchuck key with holder

• Extra Long Switch HandleAnd Pipe Handle AllowMaximum Leverage ForDrilling, Reaming LargeHoles And Added Control

• Rear Mounted AssistSpade Handle

• Moly Chrome Alloy SteelGears For High TorqueTransmission WithMinimum Wear

DW160VHeavy-Duty 3/8" (10mm) VSR Right Angle Drill (0–1200 RPM)• 100% ball-bearing construc-

tion provides durability andlonger tool life

• Compact right-angle designfor easy access in tight places

• Paddle switch is ideal for usein awkward positions and lim-ited access areas

• Shielded chuck protects userand improves grip in confinedareas

• Double gear reduction in-creases torque performanceand decreases gear stress

Chuck Size 3/8"No Load Speed 0–1,200 rpmAmps 3.7Max. Watts Out 200WGear Reduction DoubleCapacity In Wood (Spade Bit) 1-1/8"Capacity In Wood (Self-Feed) N/ACapacity In Wood (Hole Saw) 1-1/8"Capacity In Wood (Auger Bit) N/ACapacity In Steel (Twist Bit) 3/8"Includes: chuck key with holder

0201-203/8" Magnum® Drill0–2500 RPMwith All Metal Chuck

DRILLS

• Powerful 7.0 amp motor, 0 to 2500 rpm,variable speed control

• All metal Grip-Lok™ 2-sleeve keyless chuckfor a stronger hold on the bit

• All metal gear case and diaphragm • 10 ft. 2-wire rubber cord • 360° locking side handle • Ergonomic tactile grip and two finger trigger

for user comfort and balance

• 5.5 amp motor, 0 to 2800 rpm, trigger speed control with reversing

• Heavy-Duty industrial keyless chuck • 8 ft. 2-wire rubber cord • Exclusive brush cartridge system changes brushes in less

than one minute

1610-1 650 RPM1630-1 900 RPM1660-1 450 RPM

We appreciate

your business!

014SS 5/19/10 3:24 PM Page 14

15

Power Tools

0244-11/2" Magnum® Drill

0370-20Close Quarter Drill• Unique Ergonomic Design–55°

Angled Chuck for easy accessto tight places

• Lightweight• Comfortable Grip, Efficient

Paddle Switch• Quiet Running• Helical Cut, Heat Treated

Gears for Heavy-Duty Industrial/Construction applications

• All Ball and Roller Bearings

1030VSR3/8" High-Speed Drill

3107-61/2" Right AngleDrill

0234-61/2" Magnum® Drill

Capacity In Steel 3/8"Volts AC Only 120Amps 3.5No Load rpm 0-1300Gear Train Double



• Variable speed kit• Right angle drill features• Use with up to 4-5/8" Selfeed

Bits Model numbers 3107-6• Steel hardened shafts• Head and Handle Swivel

360°–Can be locked tight inany position allow 5-1/2" forright angle drill head andchuck.

Capacity In Steel 1/2"Volts AC Only 120Amps 7.0No Load rpm 0-500

• 7.5 Amp all ball bearing motor,0–2100 rpm

• Precision cut steel gears• Variable speed, reversing switch• Magnesium front housing• Ergonomic handle with soft grip• Two finger trigger with soft grip• 360° side handle• 3 prong grounded plug• Lock-on button• Includes: 360° side handle,

chuck key

• With keyed chuck• Removable Brush Cartridge

System• Heavy-Duty Industrial Chucks• Trigger Speed Control

Reversing Switches• All Ball and Roller Bearings• 8' 3-Wire Quik-Lok® Cord Sets

Quick detachment from tool fortangle free carrying and storage. Instant field repair.

• With keyed chuck• Removable Brush Cartridge

System• Heavy-Duty Industrial Chucks• Trigger Speed Control

Reversing Switches• All Ball and Roller Bearings• 8' 3-Wire Quik-Lok® Cord Sets

Quick detachment from tool fortangle free carrying and storage. Instant field repair.

1033VSR1/2" High-Speed Drill• 8.0 Amp all ball bearing motor,

0–850 rpm• Precision cut steel gears• Variable speed, reversing

switch• Magnesium front housing• Ergonomic handle with soft grip• Two finger trigger with soft grip• 360° side handle• 3-prong grounded plug• Lock-on button

DRILLS

DRILLS

015SS 5/19/10 3:24 PM Page 15

16

Power Tools

RECIPROCATING SAWS

9746VS, Quik-Change™Tiger Saw® Kit

6509-22Sawzall® with Case

6514-2118V Sawzall® — TheHatchet® Recip Saw Kit

DW304PKHeavy-Duty Reciprocating Saw Kit

6536-21Super Sawzall®

• 4-position blade clamp allowsfor flush cutting and increasedversatility

• Powerful 10.0 Amp motordesigned for heavy-duty applications

• Lever-action keyless bladeclamp for quick and easy bladechanging

• 0–2,800 strokes per minute and1-1/8" stroke length deliver fastcutting

Amps 10.0Strokes/min 0–2,800 spmStroke Length 1-1/8"Keyless Blade Clamp LeverAdjustable Shoe FixedTool Length 17.5"Tool Weight 7.0 lbsIncludes: metal cutting blade,instruction manual and heavy-dutycarrying case

• Extra-heavy-duty 10.5 AMPmotor provides maximumpower for all cutting applications.

• Electronic variable speed,0–2,600 SPM, maintains speedunder load for smooth consistent cutting.

• Full 1-1/8" cutting stroke lengthcuts more stock in less timethan shorted stroke saws.

• Quik-Change™ blade clamp forkeyless blade changes in seconds.

• Extra-heavy-duty 11.5 AMPmotor provides maximumpower for all cutting applications.

• Electronic variable speed,0–2,600 SPM, maintains speed

under load for smooth consistent cutting.

• Quik-Change™ blade clamp forkeyless blade changes in seconds.

9748Variable-Speed, DualAction Quik-Change™TIGER SAW® Kit

DW310KHeavy-Duty Reciprocating Saw Kit• 12 Amp motor delivers

increased power for heavy-dutyapplications

• 0–2,700 SPM and 1-1/8" strokelength for fast and efficient cutting

• Keyless stainless steel bladeclamp for quick and easy bladechanges and increased reliability

Amps 12.0Strokes/min 0–2,700 spmStroke Length 1-1/8"Keyless Blade Clamp TwistAdjustable Shoe YesTool Length 18"Tool Weight 8.6 lbsIncludes: metal cutting blade,instruction manual and heavy-dutycarrying case

• 13 Amp Milwaukee built motor• Orbital cutting action• Variable speed trigger,

0–3000 SPM• 1-1/4" stroke

• Counter balanced/Gear protection systems

• Quik-Lok™ blade clamp

• 11 amp Milwaukee-built motor• 0-2,800 SPM variable speed

trigger• Quik-Lok™ blade clamp for

fast, easy blade changes• Double bearing wobble plate

mechanism for less vibration• Center pivot adjustable shoe• Rubber boot for superior

gripping

• Heavy duty 'S' jacket 8 ft. twowire rubber cord

• Double insulated• Uses standard 1/2" shank

Sawzall® blades—blades maybe clamped upside down forspecial cutting needs

• 18 volt, 2.4 amp-hr. Power-Plusbattery for long run time

• Orbital action selector foraggressive wood cutting orstraight reciprocating action formetal and plastics

• Cuts up to 85 2 x 4's on a single charge

• Powerful 18 volt rare earthmotor easily handles allSawzall® applications

RS151-1/4" Reciprocating Saw

• LockJaw™ one-handed blade change system

• 12 Amps, 0–2,800 SPM• Brute™ drive system • Saw hook • Swivel cord • Variable speed trigger • Soft, comfortable,

ergonomic grip

• Soft grip boot • Foot adjustment • Blade holder IncludesAll purpose blade—SAPP6, wood with nails blade, carrying case

016SS 5/19/10 3:24 PM Page 16

17

Power Tools

CIRCULAR SAWS

4200NH4-3/8" Circular Saw

• Ball and needle bearing construction for smooth operation

• Well balanced and light foreasy handling

• Lock-off button helps preventaccidental starts

• Blade is on the left side• Dry cutting of stone and

masonry with optional diamondblade

5007MG7-1/4"MagnesiumCircular Saw

5007FK7-1/4" Circular Saw

Arbor 3/4"Max. cutting capacitiesat 90° 1-1/4"at 45° 3/4"No load speed 11,000 rpmAmps (115V) 9.1Includes: Carbide tipped blade (A-90093),Rip fence (164095-8), Socket wrench (782209-3), Spanner wrench (781011-1)

• 22.0 amp AC/DC switch• Quick release depth and

bevel levers• Diamond blade arbor

Rating 120V ACAmperage 13.0No Load rpm 4,400Max depth of cut 90° 2-3/8"Max depth of cut 45° 1-15/16"

• Magnesium componentscreate a lightweight saw(10.1 lbs.)

• Make quick, one-handedadjustments using large, rubberized levers

• Better fit and more control withcomfortable rubber grip on handle

• Settings are easy to read withoversized number and rulermarkings

Arbor 5/8"Max. cutting capacitiesat 90° 2-1/2"No load speed 5,800 rpmAmps (115V) 15.0Includes: Carbide tipped blade (A-94530),Hex blade wrench (783204-6), Rip fence (164095-8), Tool case (824772-1)

• Powerful blower clears dust• Lightweight with durable

composite footplate• ProVantage 3-year Protection

Plan

Rating 120V ACAmperage 15No Load rpm 5,600Max depth of cut 90° 2-7/16"Max depth of cut 45° 1-7/8"Includes:24 Tooth Carbide Blade—CB724AB,Carrying Bag—261 091 4300

• 13 AMP motor for continuoususe

• Shaft lock for easy bladereplacement

• Ball and needle bearing construction

• Model 5007NBK is AC/DC

Arbor 5/8" Max. cutting capacitiesat 90° 2-3/8"at 45° 1-3/4"No load speed 5,800 rpmIncludes: Carbide tipped blade (A-90009),Wrench #13 (7811203-2), Plastic tool case (824409-0)

• 22.0 amp AC/DC switch• Quick release, depth and bevel

levers• Diamond blade arbor

Rating 120V ACAmperage 13.0No Load rpm 4,300Max depth of cut 90° 2-7/8"Max depth of cut 60° 1-1/2"Max depth of cut 45° 2-1/4"

CS107-1/4" Circular Saw

SHD777-1/4" Worm Drive Circular Saw

HD58608-1/4" Worm Drive Circular Saw

017SS 5/19/10 3:25 PM Page 17

18

Power Tools

CIRCULAR SAWS

6390-21: 15 AMP Tilt-Lok™ 7-1/4" Circular Saws

314: 4-1/2" Trim Saw

• 4.5 Amp, AC/DC• 4,500 rpm• Rugged worm gear drive• 100% ball bearings• Cuts 1-5/16" at 90° & 1-1/16"

at 45°

• Standard Equipment: Saw, 20Tcarbide-tipped Riptide™ blade#12870, blade wrench#859484, knob #882835, basicinsert and operating manual

6405-6: 13 AMP 8-1/4" Circular Saw

HD5790: 10-1/4" Circular Saw

• Exclusive 6405-6 Features• 13 Amp Milwaukee Built Motor• Spindle lock for fast and easy

blade replacement• Lightweight, durable aluminum

shoe

Blade size 8-1/4"Volts AC-DC 120Amps 13.0No Load Speed RPM 5,800

• Exclusive adjustable main handle

• 15 amp, 3.25 maximumhorsepower motor

• Cushion front grip/rear handle• Maximum sight line• Convenient bevel scale• One-touch spindle lock

• Cuts 4 x 4’s in one pass• Drop foot design maintains

hand angle to work surface• AC/DC switch• Calibrated front foot scale

Ratings 120V AC/DCAmperage 15.0No Load rpm 5,200Max Depth of Cut 90° 3-15/16"Max Depth of Cut 45° 2-3/4"Standard equipmentcombination blade 42895

6460: 15 AMP 10-1/4" Circular Saw

• Exclusive 6460 Features• 15 Amp Milwaukee Built Motor• Extreme cut capacity (Cuts 4 x

4’s)• Rigid steel shoe for extra

strength

Blade size 10-1/4"Volts AC-DC 120Amps 15.0No Load Speed RPM 5,200

• Rear pivot depth of cutadjustment allows your hand toremain behind the tool at alldepth of cuts

• 15.0 Amp, high-torque motor forincreased productivity

• 50° bevel capacity increasesrange of applications

• Heavy-gauge, high-strengthaluminum alloy base forincreased durability on worksite

• Electric brake stops blade after use

DW384: Heavy-Duty 8-1/4" (210mm) Circular Sawwith Rear Pivot Depth of Cut Adjustment and Electric Brake

018SS 5/19/10 3:25 PM Page 18

19

Power Tools

JIG SAWS1591EVSK: Barrel Grip Jig Saw

DW331K: Heavy-Duty Top Handle Jig Saw Kit

• Powerful 6.5 Amp motordelivers the cutting power forthe most demanding materials

• Variable speed delivers500–3,100 strokes per minutefor optimal cutting speed for allapplications

• Lever-action keyless bladechange makes bladereplacement fast and easy

DW317K: Heavy-Duty Compact Jig Saw Kit

1590EVSK: Top Handle Jig Saw

Amps 6.5 AmpsStrokes/Min 500–3,100 spmStroke Length 1"Keyless Blade Clamp YesDust Blower YesOrbital Action 4-positionTool Weight 6.4 lbs

• Keyless blade clamp for fast,easy blade installation andremoval

• 5.5 Amp motor deliver powerfulcuts in the hardest materials

• Variable speed delivers0–3,100 strokes per minute foroptimal cutting speed

Amps 5.5Strokes/Min 0–3,100 spmStroke Length 1"Keyless Blade Clamp YesDust Blower N/AOrbital Action 4-position Tool Weight 6.2 lbs

• 6.4 Amps• Precision Control™ system• Soft Grip Ergonomic Barrel • One-Touch® blade change• Constant Response™ circuitry• Fully Counterbalanced

Mechamism• Wrenchless Foot with tension

adjustment• Smooth non-marring base

cover

Rating 120V ACAmperage 6.4Stroke Length 1"No Load Strokes/Min 500–2,800Stroke Length 1"Weight (lbs.) 6Cutting Capacity—Plastics 1-1/4"Cutting Capacity—

Stainless Steel 1/8"Voltage 120VCutting Capacity—Mild Steel 3/8"Max. Bevel Cut 45°

• 6.4 Amps• Precision Control™ system• One-Touch® blade change• Quick bevel adjust cast

aluminum foot• Constant Response™ circuitry• T-shank machined plunger• On/off blower switch• Variable speed trigger• 4-position orbital control• Lock on button• Variable speed dial

Rating 120V ACAmperage 6.4Stroke Length 1"No Load SPM 500–2,800Stroke Length 1"Weight (lbs.) 6Cutting Capacity-Plastics 1-1/4"Cutting Capacity-

Stainless Steel 1/8"Voltage 120VCutting Capacity-Mild Steel 3/8"

Max. Bevel Cut 45°Hertz 50–60 Hz

D28499X: Heavy-Duty 7" & 9" 5.3 HP Large Angle Grinder

• High power 5.3 HP (maximummotor HP) 6,000 rpm motorwith overload protectionprovides higher operatingspeeds under load

• Epoxy coated field andarmature provide long servicelife against abrasion fromairborne debris

• Keyless adjustable guardsallow for guard adjustments tobe made without tools

Amps 15.0 AC/DCMax. Watts Out 3,950WNo Load Speed 6,000 rpmUse Wheels RPM Above 6,600 rpmSpindle Lock YesSpindle Thread 5/8"–11Tool Weight 14.5 lbs.

DW28402: Heavy-Duty 4-1/2" (115mm) Small Angle Grinder

• 10.0 Amp AC/DC 11,000 rpmmotor designed for fastermaterial removal and higheroverload protection

• Dust Ejection System™provides durability by ejectingdust particles that enter the toolthrough the air intake vents

• Jam-pot, low profile gear caseprovides precise gearalignment for a smoother,quieter transmission whileallowing access to tight spaces

Amps 10.0 AC/DCMax. Watts Out 1,200 WNo Load Speed 11,000 rpmUse Wheels 12,000 rpmSpindle Lock YesSpindle Thread 5/8"–11Weight 4.6 lbs.

JIG SAWS

CORDED GRINDERS

019SS 5/19/10 3:25 PM Page 19

20

Power Tools

CORDED GRINDERS

1800A: 4-1/2" Angle Grinder

W7-115: Quick Angle Grinder• Robust Metabo Marathon motor• Die cast aluminum gear

housing• Metabo S-automatic torque

limiting clutch• Spindle stop• Metabo “Quick” tool quick

change• Additional VibraTech handle for

vibration damping• Adjustment of protective hood

without tools• Ergonomic shape for fatigue-

proof rough grinding

1347A: 4-1/2" Angle Grinder

W7-115: 4-1/2" Angle Grinder

• 2-Position auxiliary handlespecifically designed andangled to a “natural” position formaximum comfort and control

• Vibration control side handlereduces vibration up to 60%

• For extended use applications• Lock-on/off switch • AC/DC capability

• Vibration Control Handle• Sealed switch • ServiceMinder™ brushes

Rating 120V AC/DCAmp 7.5Max. Motor HP 1.1No Load rpm 11,000Spindle Thread 5/8"–11

• 7 Amps, 10,000 No Load RPM• 7/8" arbor, 5/8"–11 spindle thread• 4/8 lbs-tool weight• Carrying case included• Switch with lock on capability• Spindle lock• Low profile aluminum die-cast

gear housing

• Toolless guard adjustment• 2-position side handle• Metabo slip clutch• Auto-stop carbon brushes• Winding protection grid• Suitable for occasional

DC use

• Metabo winding protection grid• Auto-stop carbon brushes• Versatile applications through

the extensive range of accessories

Standard equipment:• Guard• Side Handle• Flange Kit• Spanner Wrench• Wheel for Steel• 1 horsepower motor• 5/8"–11 spindle• Ball bearing motor and output• 2-position tool side handle

• Service-Minder brushes takethe guesswork out of preventive maintenance

Rating 120V AC/DCAmp 6.5Max. Motor HP 1No Load rpm 11,000Spindle Thread 5/8"–11

• 15 Amps, 6,000 RPM• Vibration Control Side and Main

Handles — Reduces vibrationup to 60%, providing uncompro-mising user comfort forextended periods of work

• Metal Gear Cover — Maximumdurability

• Lock-on/off switch — forextended use applications

• AC/DC capability — Extendsthe versatility of the tool byworking from DC outlets such

as welders and generators• Epoxy-coated Field Windings —

Provides ultimate protectionagainst abrasive dust and metaldebris

• Precision spiral bevel gears —Quality engineering and con-struction for smooth powertransmission

• Service Minder Brushes —Eliminate guesswork, stops toolwhen preventive maintenance isrequired

1853-5: 7"/9" Large Angle Sander

1775E: 5" Tuckpoint Grinder

• Powerful 8.5 Amp 11,000 RPM motor

• Specially designed guard system — For tuckpointing appli-cations with dust extraction.Meets and exceeds UL®, OSHAand NIOSH standards.

• Dust extraction port — Results incleaner job when used with pro-vided vacuum adapter VAC002.

• Tool-free blade access • Variable depth adjustment • Large viewing window — Pro-

vides the ability to view workingarea for better control and accu-racy.

• Lock-on/off swtich — Forextended use applications

• Sealed switch — Keeps debrisout of the switch mechanism andextends switch life.

• Constant response™ circuitry— Provides soft start, main-tains constant speed underload, provides overload protec-tion

• Epoxy Coated Field Windings • Service minder™ brushes —

Eliminatesw guesswork, stopsthe tools when preventativemaintenance is required

• 5/8"-11 Spindle — Wide flexi-bility for mounting most popu-lar accesories

• Spindle Lock — For quickwheel changes

020SS 5/19/10 3:25 PM Page 20

21

Power Tools

CORDED GRINDERS6153-20: 4-1/2" Super Magnum®

12 AMP Sander/Grinder

DW292: Heavy-Duty 1/2" (13mm) Impact Wrench

• 345 ft-lbs of deliverable torque in forward and reverse

• 1/2" detent pin anvil• AC/DC forward/reverse

rocking switch• Soft grip handle for superior

ergonomics• Ball bearing construction for

increased durability

DW294: Heavy-Duty 3/4" (19mm) Impact Wrench with Detent Pin Anvil

Amps 7.5 AmpsNo Load Speed 2,100 rpmMax. Torque 345 ft-lbsImpacts/Min 2,700 bpmTool Length 11-1/4 "Tool Weight 7.0 lbs

• 345 ft-lbs of deliverable torquein forward and reverse

• 3/4" detent pin anvil• AC/DC forward/reverse

rocking switch• Soft grip handle for superior

ergonomics• Ball bearing construction for

increased durability

Amps 7.5 AmpsNo Load Speed 2,100 rpmMax. Torque 345 ft-lbsImpacts/Min 2,700 bpmTool Length 11-1/4 "Tool Weight 7.0 lbs

• Powerful 12 Amp 2.1 Maximum HP

• Paddle Switch with integrated lock-off button

• Cast aluminum gear housing withrecessed spindle lock

• Adjustable wheel guard

Speed rpm 11,000Disc Dia. 4-1/2"Volts 120 AC-DC

No Load Speed 2,800–10,500 rpmSanding Disc 4-1/2"Amps (120V) 12

• 6.0 Amp Power• Easier to handle—Smaller diameter and 20%

shorter• More Power—New motor technology for 45%

higher speed under load• Easier to maintain—Replaceable motor brushes

and service parts available• Smart Venting—Vents dust away from user• Works with ROTOZIP XBITS and ZIPBITs but not

compatible with attachment series.• Collet System—Includes 1/8", 5/32" and 1/4"

collet and collet nut, also for use with Zip Bits andnew XBITS

DW660:Heavy-Duty Cut-Out Tool

DR1Drywall Router

CORDED IMPACT TOOLS

CORDED CUTOUT TOOLS

• 5 stage variable speed control dial• Improved 12 AMP motor design• Larger and improved carbon brush

material• Electronic limiter stops the motor

and prevents accidental motoroverload and burnout

• “Tool-less” wheel guard adjustmentfor easy clamping

• Labyrinth construction seals andprotects the motor and bearings

9564CV: 4-1/2" Angle Grinder

• Tool-free bit change for fast andeasy bit changing without awrench

• Turn-on/bump-off switch allowsusers to easily shut tool off

• 5.0 Amp, 30,000 rpm motor provides morecutting power

• Slim body design for less fatigue overprolonged use

Includes:• 1 general purpose

bit• 1 drywall cutting bit• 1/4", 1/8" collets

Amps 5.0 AmpsNo Load Speed 30,000 rpmCollet Diameter 1/8", 1/4 "Adjustable Guide Yes Spindle Lock Yes Tool Length 10"Tool Weight 3.2 lbsShipping Weight 5.5 lbs

Let ourtrained

technicianskeep your

power tools in top

condition.

021SS 5/19/10 4:23 PM Page 21

22

Power Tools

BAND SAWS

D28770KHeavy-Duty Deep CutVariable Speed Band Saw Kit

6232-6Deep Cut PortableElectric Band Saws• Two Speed• Optimum Speed Range• Cuts pipes, bolts, re-bar, angle

iron, tracks and other profiles ina variety of materials. Allmodels include Super-Tough®Bi-Metal blades.

• Blade Tightening Lever

6238Deep Cut PortableElectric Band Saws

6226Portable ElectricBand Saws

• Trigger Control• Optimum Speed Range• Cuts pipes, bolts, re-bar,

angle iron, tracks and otherprofiles in a variety of materials.All models include Super-Tough® Bi-Metal blades.

• Blade Tightening Lever

No Load surfaceFt. Per Min. 350–250Volts 120 AC onlyAmps 6.0/5.0

• Rubber bumpers protectguards from jobsite abuse

• Lightweight and well-balanceddesign allows for moreaccurate cuts

• Innovative sight light allows theuser to see cut line in anyjobsite environment

• Powerful 6.0 Amp motordesigned to withstand jobsiteapplications

• 4-3/4" deep cut capacity forround or rectangular stock

• Dual bearing blade guiderollers increase durability in theblade support system

• Two Speed• Use standard 44-7/8" x

1/2" .020" Band SawBlades

• Powerful Motor withLong Life brushes andhigh output fans

• Optimum Speed RangeCuts pipes, bolts, re-bar, angleiron, tracks and other profiles ina variety of materials. Allmodels include Super-Tough®Bi-Metal blades

• Blade tightening Lever

No Load surfaceFt. Per Min. 250/200Volts 120 AC onlyAmps 6/5

11255VSR1" SDS-plus®

BULLDOG XtremeRotary Hammer

• 7.2 Amp; 0–1,300 RPM; 0–5,800 BPM

• HammerHook™ allows quicktool storage

• Multi-function Selector—3 modes of operation, rotationonly, rotary hammer andhammer-only mode

• Vario-Lock™ PositioningRotates and locks chisel into 36different positions to optimizeworking angle

• Patented Rotating Brush Plate

Rating 120VAmperage 7.2No Load RPM 0–1,300No Load BMP 0–5,800Impact Energy 2.2 ft. lbs

11224VSR7/8" Rotary Hammer• D-Handle design for extra

control• Vario-lock positioning enables

36 different positions• Three operational modes• Hammer Only• Rotation Only• Hammer & Rotation• Standard Equipment• 360° Auxiliary handle• Depth Gauge• Plastic Case

Rating 120V ACAmperage 6.9No Load rpm 0–1,100No Load bmp 0–6,150Impace Energy 1.6 ft. lbs

ROTARY HAMMERS

No Load surfaceFt. Per Min. 0–350Volts 120 AC onlyAmps 6.0

Amps 6.0Ft. Per Min. 82–280Max Capacity (Rectangular) 4-3/4"

Max Capacity (Round) 4-3/4"

Tool Length 21.0"Tool Weight 15.0 lbs

022SS 5/19/10 3:26 PM Page 22

23

Power Tools

D25213KHeavy-Duty 1" Three Mode D-HandleSDS Hammer Kit

D25113K1" Pistol Grip ThreeMode SDS Hammer

• 2.5 ft-lbs of impact energy • 8 Amp motor provides high

performance and overloadprotection

• Reverse feature assists in theremoval of fasteners

• Variable speed allows for precisehole placement on work surface

• Factory set clutch reducessudden, high torque reactions ifbit jams

• 360° side handle adjusts easilyfor preference or use in tightspaces

D25600KHeavy-Duty 1-3/4"SDS Max RotaryHammer Kit

11239VS1" Rotary Hammer

Concrete Drilling 1"Impact Energy 2.5 ft/lbsAmps 8 AmpsChipping Yes Loaded Speed 0–850 rpmWood/Steel Drilling w/adaptorNo Load Speed 0–1,150 rpmBlows/Min 0–4,300 bpmSwitch VSR Clutch Factory SetTool Length 14.2"Tool Weight 5.7 lbs

• 11.5 Amp motor • Electronic Variable Speed • 8 ft-lbs of impact energy • SDS max toolholder is

compatible with most bits theuser has

• Rear handle mount

• Factory clutch • Modular construction • 360-degree side handle

Concrete Drilling 1–3/4 "Impact Energy 8 ft/lbsAmps 11.5 AmpsChipping Yes No Load Speed 140–280 rpm

Loaded Speed (bpm) 1,330–2,660 bpm

Clutch Yes Tool Length 18.5"Tool Weight 13.4 lbs

• 2.3 ft-lbs of impact energy • 7.5 Amp motor provides high

performance and overloadprotection

• Reverse feature • Variable speed • Factory set clutch reduces

sudden, high torque reactions ifbit jams

• 360° side handle adjusts easilyfor preference or use in tightspaces

Concrete Drilling 1"Impact Energy 2.3 ft/lbsAmps 7.5 AmpsChipping Yes Loaded Speed 0–800 rpmWood/Steel Drilling w/adaptorNo Load Speed 0–1,100 rpmBlows/Min 0–4,200 bpmSwitch VSRTool Length 16.6"Tool Weight 6.1 lbs

• Electro-pneumatic impactsystem

• SDS-Plus bit system• 2 Modes of operation quickly

converts from rotation only tohammer/rotation

• Variable speed 3 finger switch• 360° side assist handle with

built-in quick release depthgauge

• Standard equipment• Assist Handle• Case

Rating 120V ACAmperage 7.2No Load rpm 0–1,050No Load bpm 0–4,000Impact Energy 2.4 ft. lbs

D25890KHeavy-Duty 19 lb.SDS Max DemolitionHammer• 15 ft-lbs of impact energy • SHOCKS™ — Active

Vibration Control reducesvibration by up to 70%

• Lock-on switch reduces userfatigue while chipping

• Modular design provideseasy access to switch,brushes, & cord-set

• 15 Amp motor providesmaximum overload protection& power

Impact Energy 15 ft/lbsAmps 15 AmpsMax Watts Out WLoaded Speed (bpm) 1,152–

2,304 bpm

Variable Impact Control Dial 8 Settings

Chisel Rotation Yes Tool Length 23"Tool Weight 19 lbs

D25300DHeavy-Duty Rotary Hammer Dust Extraction• For use with D25303 and D25304 hammers• High efficiency filter delivers 99.95%

efficiency at 5 microns• Built-in motor keeps performance high while

drilling• 2-second power-off delay allows dust

extraction to continue for 2 seconds afterdrill is switched off

• Lightweight at only 3.3 lbs

Filtering capacity above 99.95%efficiency

at 5 microns

Dimensions 11.6 x 11.9 x 4"Tool weight 3.3 lbsShipping weight 3.65 lbs.

ROTARY HAMMER

ROTARY HAMMERS

023SS 5/19/10 3:26 PM Page 23

24

Power Tools

DEMOLITION HAMMERS

11318EVSSDS-MAX®

Demolition Hammer

11316EVSDemolition Hammer

11245EVS2" Rotary Hammer

Rating 120V ACAmperage 11No Load BPM 1,300–3,300Impact Energy 8.8 ft. lbsLength 17.75Weight (lbs.) 12.5

• Compact and lightweight• Front handle rotates 360° and

pivots front-to-back• Service-Reminder light• Speed dial allows variable

impact rate• Standard Equipment• 360° Auxiliary Handle• Case

Rating 120V ACAmperage 13.6No Load BPM 900–1,890Impact Energy 18.4 ft. lbsTool Holder SDS-Max

• Our largest, most powerful SDS-max rotary hammer

• Two modes of operations:Hammer and RotationHammer Only

• Service-Reminder light• Standard Equipment• 360° Auxiliary Handle• Case

Rating 120V ACAmperage 14.0No Load RPM 120–250No Load BPM 1,100–2,500Impact Energy 13.3 ft. lbsMax. Capacity Spiral Bit 2"Core Bit 6"

11241EVS1-9/16" SDS-MAX®

Combination Hammer• “Combination” dual mode

selector-2 modes of operation,rotary hammer and hammeronly mode

• Turbo™ Power—delivers 20%more power in hammer onlymode

• Service Minder™ light indicateswhen preventativemaintenance is required

• Power light ensures operatorthat power feed is live

• Patented cord turret providesadded flexibility and reducescord wear

• Constant Response™Circuitry—provides soft-start-Maintains constant speedunder load—Provides overloadprotection

• Service Minder™—Indicateswhen preventativemaintenance is required

• Power light—ensures operatorthat power feed is live

• Patented cord turret—providesadded flexibility and reducescord wear

Rating 120V ACAmperage 11No Load RPM 170–340No Load BPM 1,700–3,300Length 17.25Weight (lbs.) 14

D25550KHeavy-Duty 1-9/16" Spline Rotary Hammer Kit• 11.0 Amp motor delivers high

output and overload protection• Electronic Variable Speed

allows the user to control thespeed of drilling and chipping

• 7.3 ft-lbs of impact energyprovides fast drilling andpowerful chipping

• Rubber grip helps reduce thelevel of vibration felt by the userwhen operating the tool

• Rear handle mount means lessbending over when using tool indown drilling applications

Concrete Drilling 1-9/16"Impact Energy 7.3 ft/lbsAmps 11.0 AmpsChipping Yes Wood/Steel Drilling N/ANo Load Speed 140–280 rpmLoaded Speed (bpm) 1,330–2,660 Clutch Yes Tool Length 18.5"Tool Weight 14.5 lbs.Includes: 360° side handle, depthrod and heavy-duty kit box

11265EVS1-5/8" Spline Rotary Hammer• Unmatched Power to Weight

Ratio - 13 Amps, 8.1 ft-lbsImpact energy & 14.3 lbs

• Active Vibration Control™• One-Hand™ SDS-max®

• Constant Response Circuitry-Maintains speed under load andoverload protection

• Turbo™ Power • Vario-Lock™ Positioning • Auto-Max™ variable speed Dial • Service Minder™ light • Patented cord turret

Rating 120V ACAmperage 13No Load RPM 170–340No Load BPM 1,700–2,900Max. Hole Diameter in Concrete 1-5/8"

Max. Hole Diameterin Concrete-Core Bit 4-1/8"

024SS 5/19/10 3:26 PM Page 24

25

Power Tools

• 11.5 Amp motor delivers high outputand overload protection

• Electronic Variable Speed allows theuser to control the speed of drillingand chipping

• 8 ft-lbs of impact energy providesfast drilling and powerful chipping

• Spline toolholder is compatible withall spline drive bits

• Rubber grip helps reduce the level ofvibration felt by the user whenoperating the tool


ROTARY HAMMERD25901KHeavy-Duty 22 lb. SDSMax DemolitionHammer with Shocks

11335KBreak Hammer—Jack

D25650KHeavy-Duty 1-3/4" SplineRotary Hammer Kit

• Lasts 2 times longer than its closestcompetitor

• Vibrates Less—Shock absorbingtop handle reduces vibration by upto 40% vs. the competition

• Hits Harder—Impact force of 34 ft.-lbs and powerful 1750 Wmotor hits up to 50% harder thanits closest competitor

Rating 120V ACAmperage 15.0No Load BPM 1,300Impact Energy 34 ft. lbsLength 30"Weight 38.0 lbs

• 14.0 Amp motor provides highperformance and overloadprotection

• Active Vibration Control (AVC)™reduces vibration resulting in lessuser fatigue and more productivity

• Non-air pumping beatpiece eliminatesmasonry dust from entering the unitextending tool and seal life

• Spring-loaded dust seals ensurelonger seal life

• Variable Impact Control Dial (19settings) ensures accurate impact energy depending on the application

• Large on/off rocker switch allows for easy single finger operation

Impact Energy 3.7–18.5 ft/lbsAmps 14 AmpsMax Watts Out 750 WLoaded Speed 1,020–2,040 bpmVariable Impact 19 Settings

Control DialChisel Rotation One-step,

12 PositionsTool Length 26.8"Tool Weight 21.6 lbs

Concrete Drilling 1-3/4 "Impact Energy 8 ft/lbsAmps 11.5 AmpsChipping Yes Wood/Steel Drilling N/ANo Load Speed 40–280 rpmLoaded Speed (bpm) 1,330–2,660 bpmClutch Yes Tool Length 18.5"Tool Weight 14.5 lbs

11304K Breaker Hammer Kit• Kit includes model11304, two moil

points, two narrow chisels and onehammer hauler

• Standard Equipment• Breaker Hammer• (2) Moil Point• (2) Narrow Chisel• (1) Hammer Hauler

Rating 120V ACAmperage 15.0No Load BPM 1,340Impact Energy 37 ft. lbsHandle Span (in.) 23-1/2Length (in.) 29-3/4Body Depth (in.) 5-3/4

BREAKER HAMMER

• 11.5 Amp motor delivers high outputand overload protection

• 8 ft-lbs of impact provides powerfulchipping

• Rubber grip helps reduce the level ofvibration felt by the user whenoperating the tool


• Modular construction allows servicetechnicians to repair tools quickly forless down time when you servicetools

DEMOLITION HAMMERD25830KHeavy-Duty 12 lb. SDSMax Demolition Hammer

Impact Energy 8 ft/lbsAmps 11.5 AmpsMax Watts Out WLoaded Speed (bpm) 1,330–2,660 bpmVariable Impact Yes—7 Settings

Control DialChisel Rotation Yes—Manual Tool Length 18.5"Tool Weight 12.3 lbs

DEMOLITION HAMMER

DEMOLITION HAMMER

D25980KHeavy Duty Pavement Breaker with Hammer Truck and Steel• 61 Ft-lbs impact energy provides maximum

performance• SHOCKS—Active Vibration Control reduces user

fatigue and increases comfort and productivity• 15 amp motor provides maximum power and

overload protection• Rubber coated handles provide greater comfort

and control• Electronic soft start increases

productivity by reducing bit walking• Hammer Truck provides easy

transportation of pavement breaker

Impact Energy 61 ft/lbsAmps 15 AmpsMax Watts Out WLoaded Speed (bpm) 900 bpmVariable Impact Settings

Control DialChisel RotationTool Weight 68.3 lbs

025SS 5/19/10 3:27 PM Page 25

26

Power Tools

COMPACT HAMMER DRILLS

DW520KHeavy-Duty 1/2" (13mm)VSR Dual RangeHammerdrill Kit

5371-61/2" Magnum® Hammer Drills• Kit includes 5370–1• Percussion bits 3/16" x 3", 1/4" x 4", 5/16" x 4", 3/8" x 4"• Trigger Speed Control, Reversing• For Percussion Carbide-Bit Drilling In Concrete, Masonry and Drilling

in Wood or Metal• Drives Concrete Screw Fasteners• 8' 3-Wire Quik-Lok Cord On

D25313KHeavy-Duty 1" L-ShapeSDS Rotary Hammer Kit

1194AVSR1/2" Hammer Drill

Volts AC only 120Amps 5.5SpeedLow 0–1,000High 0–2,500

Blows Per MinLow 0–20,000High 0–50,000

Concrete Drilling 1"Impact Energy 2.3 ft/lbsAmps 7.5 AmpsChipping Yes Loaded Speed 0-800 rpmWood/Steel Drilling w/adaptor

No Load Speed 0-1,100 rpmBlows/Min 0-4,200 bpmSwitch VSR Clutch Factory SetTool Length 11.5 "Tool Weight 6.5 lbs

• 8.2 Amp motor provides highperformance and overload protection.

• High/low gear for high speed drilling,or high toque applications

• Dual mode: hammerdrill/drill for wood, steel or masonry application

• Rubber grip and two- finger trigger for increased comfort• 360 degree side handle with depth rod offers greater control,

versitility, and increased depth accuracy• Light weight design for less user fatigue• Variable speed allows for precise hole placement on

work surface

Amps 8.2Max. Watts Out 750WNo Load Speed 0–1,100/

0–2,700 rpmBlows/Min 0-19,000/

0–46,000 bpm

Capacity In Steel 1/2"Capacity In Wood 1-1/2"Concrete Optimum 3/16–7/16"Concrete Maximum 1/2"Tool Length 14"Tool Weight 5.3 lbs

• Dual-torque gear box• 1/2" chuck mounted on a

1/2"–20NF spindle• Selector lever gives full torque

output in low and high gear forrotation only or rotation withhammering action

• Comfortable contoured gapminimizes operator fatigue andallows multiple grippingpositions

Rating 120V ACAmperage 8.0Concrete 1(low)3/4"

2(high)3/8"Steel 1(low)1/2"

2(high)1/4"Aluminum 1(low)5/8"

2(high)3/8"

No Load RPM 1(low)0–1,0002(high)0–2,600

No Load BPM 1(low)0–16,0002(high)0–41,600

Spindle 1/2"–20

5392-63/8" Hammer Drills• 3/8" Keyed Chuck• For percussion drilling with carbide-tipped hammer-drill bits in

concrete and masonry or drilling without hammering in wood or metal

• Trigger Speed Control• Side handle can be used on

either side and with or withoutdepth gauge

• Reversing

Volts AC only 120Amps 5.0No Load rpm 0–2,500No Load Blows Per Min

0–50,000

We welcome

the opportunity to quote

on any special tools

you may require.

• L-Shape design offers superiorbalance and control

• 2.3 ft-lbs of impact energyprovides fast drilling andpowerful chipping

• 7.5 Amp motor provides highperformance and overloadprotection

• At only 11-1/2" this hammer isthe most compact in the marketallowing users to get into tightspaces

• Light weight design (6.5 lbs)provides comfort for extended use

• Dust extraction connectionallows the use of the D25300Ddust collection system

• Chipping (Hammer-Only) modeallows user to perform lightchipping applications such asremoval of mortar splatter

026SS 5/19/10 3:27 PM Page 26

27

Power Tools

HAMMERSHR2811F1-1/8" Rotary Hammerwith L.E.D. Light• 3-Mode Operation: Rotation Only &

Hammering with Rotation andHammering Only

• Extended service life of carbonbrushes

• Recessed Lock-on button forcontinuous use

• “No Hammering When Idling” functionensures extra-low vibration under noload

• 0–1,100 RPM & 0–4,500 BPM fordemanding applications

• Powerful, compact, ergonomic designwith padded grip and side handle forincreased operator comfort

CapacityConcrete (with core bits) 3-1/8"Steel 1/2"Wood 1-1/4"

AMPS 6.7No Load RPM 0–1,100Blows/min.(BPM) 0–4,500Impact Energy (J) 2.7Length 12-5/8"Net Weight (lbs.) 7.3

HR24551" Rotary Hammer with D-Handle (3-Mode)• 2X faster drilling with synchronized

RPM and BPM• Lighter and more powerful than any

hammer in it’s class• 3-mode operation: “rotation only”,

“hammering with rotation” or“hammering only”

• Chisel rotates 360° with 40 differentlocking positions

• Variable speed for complete drillingand hammering control; reversible

• Positive bit lock ensures that the bit issecurely fastened

• Built-in torque limiter helps prevents kickback when hitting reinforcements

CapacityWood 1-1/4’’Steel 1/2"Concrete (with core bits) 1"

AMPS 7.0No Load RPM 0–1,100Blows/min.(BPM) 0–4,500Length 16-3/8"Net Weight (lbs.) 6.2Impact Energy (J) 2.7Shipping Weight (lbs.) 10.31

HP2050F3/4" Hammer Drillwith L.E.D. Light• Powerful 6.6 AMP motor and

lightest tool on the market (5.1 lbs.)

• 2-Modes: hammering withrotation and rotation only

• Positive Stop Mode Selectorprevents accidental modedisengagement

• Built-in Torque Limiter stopsbit rotation when hittingreinforcement to prevent kick-back

• Large trigger switch and 360°swivel side handle for addedcomfort

Capacities:Concrete 3/4"Steel Low 1/2"

High 5/16"Wood 1-9/16"

No Load RPM Low 0–1,200High 0–2,900

Blows/min.(BPM) Low 0–24,000High 0–58,000

AMPS 6.6Length 14-1/4"Net Weight (lbs.) 5.1Shipping Weight (lbs.) 8.80

HR1830F11/16" Rotary Hammer Kitwith L.E.D. Light• Dual operation mode; rotation only

and hammering with rotation• Variable speed (0–1,500 RPM) and

(0–5,000 BPM) for demandingapplications

• “No hammering when idling” functionensures extra-low vibration under no load

• Soft-grip side handle with elastomerfor better comfort

• Ideal for overhead applications andworking in confined areas

• Carbon brushes for extended service life

• Ergonomic and well-balanced design (3.7 lbs.)• Recessed lock-on button for continuous use

CapacityConcrete (with core bits) 11/16"Steel 1/2"Wood 15/16"

AMPS 4.2No Load RPM 0–1,500Blows/min.(BPM) 0–5,000Length 10-7/8"Net Weight (lbs.) 3.7Impact Energy (J) 1.2Shipping Weight (lbs.) 11.0

HR4001C1-9/16" SDS-MAX Rotary Hammer• One touch sliding chuck accepts SDS-

Max hammer steel• 2-mode switch for “hammering only”

or “hammering with rotation”• Preset variable speed dial with 5

settings to match the bit speed to theapplication

• 16.4 ft. jobsite cord for greaterversatility and instant power

• L.E.D. power light indicates switchfailure or cord breakage; L.E.D. servicelight indicates carbon brushes need tobe replaced

• Externally accessible brushes for easyreplacement and longer motor life

CapacityConcrete (with core bits) 4-1/8"

No Load RPM 235–480Blows/min.(BPM) 1,350–2,750Impact Energy (J) 9.5AMPS 11Bit type SDS - Max. shank bitNet Weight (lbs.) 13Shipping Weight (lbs.) 27.56

HR4010C1-9/16" SDS-MAX RotaryHammer with AVTTechnology• Powerful 11 AMP motor; efficient

1,350–2,750 BPM to tackle the mostdemanding jobs

• One touch sliding chuck accepts SDS-Max hammer steel

• 2-mode switch for “hammering only”or “hammering with rotation”

• Preset variable speed dial with 5 settings to match the bit speed tothe application


• L.E.D. power light indicates switch failure or cord breakage; L.E.D. servicelight indicates carbon brushes need to be replaced

CapacityConcrete (with core bits) 4-1/8"

No Load RPM 235–480Blows/min.(BPM) 1,350–2,750Impact Energy (J) 9.5AMPS 11Bit type SDS—Max. shank bitNet Weight (lbs.) 13.9Shipping Weight (lbs.) 28.67

027SS 5/19/10 3:27 PM Page 27

28

Power Tools

HAMMERSHM1202C20 lb. DemolitionHammer (SDS, VariableSpeed)• Hard hitting 21.9J (20 lb.); ideal for

horizontal work• Powerful 13 AMP motor for maximum

performance• Slide on/off switch for easy operation• Comfortable rubber D-shaped side

handle absorbs vibration; adjusts to 8 different positions forward and back

• One touch sliding chuck for easy bitinstallation and removal

• 12 angle settings of bit• Dust proof chuck cap protects tool from damage from dust and debris

Blows/min.(BPM) 950–1,900Impact Energy 21.9AMPS 13.0Bit type SDS-Max.shankLength 22-3/4"Net Weight (lbs.) 20.5Shipping Weight (lbs.) 37.5

HM1304B35 lb. DemolitionHammer• Accepts popular 1-1/8" hex

hammer steel• Rugged side handle swivels

360 degrees and adjusts to several positions

• Convenient lock-on button forcontinuous operation

• Enlarged rubberized grip isergonomically designed to providecomfort, control, and reducedoperator fatigue

• Low noise level at only 103 dB• Lowest vibration level in its class at 16

(meters/second)

Bit type 1-1/8" hexBlows/min.(BPM) 1,450Impact Energy 27.5AMPS 13Noise Level (dB) 103Vibration Level (m/s) 16Cord length 16.4’Length 32-3/4"Net Weight (lbs.) 35.5Shipping Weight (lbs.) 58.1

HK1810Power Scraper(Variable Speed)• Quick change bit retainer for

easy changes• Automatic brush cut-out

system to protect motor• Factory grease packed for

reduced maintenance• All ball bearing construction for

longer tool life• Powerful 5 AMP motor with

0–3,200 BPM for maximumperformance

• Double insulated

Blows/min.(BPM) 0–3,200Impact Energy 3.9AMPS 5.0Length 12-3/8"Net Weight (lbs.) 7.0Shipping Weight (lbs.) 13.7

HM181070 lb. BreakerHammer• Powerful 15 AMP motor; efficient

1,100 BPM to tackle the mostdemanding jobs

• Lowest noise level in its class at only107dB

• Accepts popular 1-1/8" hex hammersteel

• Automatic brush cut-out systemprotects commutator for longer toollife


• Cylindrical tool holder enables newbolt holes to be drilled should the original bolts break

• Warning lamp indicates trouble with the cord; AC/DC switch for use with• Alternative power sources

Bit Type 1-1/8" Hex ShankBlows/Min.(BPM) 1,100Impact Energy (Joules) 63.0AMPS 15.0Noise Level 107dBVibration Level (m/s2) 8Cord Length 16.4’Length 32-1/2"Net Weight (lbs.) 70.6Shipping Weight (lbs.) 81.6

We welcome the opportunityto quote on any special tools

you may require.

028SS 5/19/10 3:27 PM Page 28

29

Power Tools

POWER TOOLS2107FKPortable Band Saw Kit• Dual bearing blade guides and

adjustable stopper plate• Variable speed dial for setting

maximum cutting speed• Blade tightening lever for fast and easy

blade installation• Accepts standard

44-7/8" x 1/2" blade

Cutting capacities:Round workpiece 4-3/4"Rectangular

workpiece 4-3/4" x 4-3/4"No load speed (ft./min.) 200–350AMPS 6.5Overall length 20-5/8"Net Weight (lbs.) 13.9Shipping weight (lbs.) 22.05

TW03501/2" Drive Impact Wrench• 0–2,000 impacts per minute for

maximum efficiency• High max torque (260 ft.lbs.) for

demanding applications• Efficient impact system with less

vibration and longer tool life• Compact length for easy handling and

total operator control• Externally accessible brushes for easy

inspection and replacement• Ergonomically designed rubberized

grip improves control whileminimizing operator fatigue

Square Drive 1/2"No Load RPM 0–2,000Impacts/min.(IPM) 0–2,000Torque (ft.-lbs.) 260AMPS 3.5Net Weight (lbs.) 6.4Shipping Weight (lbs.) 11.0

5046DWB18V 6-1/4" Cordless MetalCutting Circular Saw • Fixed base at 45° for improved dust

collection• Electric brake for quick adjustments• Powerful two-piece “D-35” motor with

replaceable armature for longer life• Exclusive externally accessible

brushes for easy replacement

5057KB7-1/4" Circular Saw (with Dust Collector)• Dust collection container captures

waste for a clean work environment;dust port at rear of housing can beconnected to a vacuum

• Lever enables blade guard to beretracted for easier plunge cuts

• Bearings and switch are dust proof forlonger tool life

• Bevel cuts 0°–45° enabling a widevariety of cuts

• Shaft lock for fast and easy bladechanges

• Includes 28 tooth carbide tipped bladedesigned especially for cutting fiber-cement materials

Blade Diameter 7-1/4"Arbor 5/8"Max. cutting capacity at 90° 2-3/8"

at 45° 1-1/8"No Load RPM 5,800Watts out 2,100AMPS 13.0Length 14"Net Weight (lbs.) 11.7Shipping Weight (lbs.) 15.8

JS8000Fiber Cement Shear Kit(Variable Speed)• Single-piece cutting head is machined

from precisely milled aluminum toensure blades cut straight

• Solid steel blades cut clean, straightlines with a maximum cutting capacityup to 5/16"

• 1/2" protected spindle withstandsheavy torque loads from powerful 6.5 AMP motor

• Lightweight cast aluminum gear housing for durability• Retractable tool hook allows user to work in tight spaces• Lock-on button for continuous operation

Capacity Steel 5/16"AMPS 6.5Strokes/min.(SPM) 0–2,500Net Weight (lbs.) 4.6Shipping Weight (lbs.) 8.2

Blade Diameter 6-1/4"Arbor 5/8"Max. Cutting Depth 2-1/16"No Load RPM 2,400Watt Hours 46.8Battery (Ah) 2.6Length 13-5/16"Net Weight (lbs. w/battery) 8.4Shipping Weight (lbs.) 20.6

BFS45018V LXT Lithium-IonCordless DrywallScrewdriver• Makita built 4-pole motor handles

drywall and framing applications at4,000 RPM in a compact lightweightdesign

• New silent clutch design in forwardmode uses extra durable materialsdecreases driver noise

Bit Shank 1/4" HexNo Load RPM 4,000Watt Hours 54.0Battery (Ah) 3.0 (Li-Ion)Overall Length 10-1/8"Net Weight (lbs. w/battery) 4.2Shipping Weight (lbs.) 12.0

BTL06118V LXT Lithium-IonCordless Angle ImpactDriver• Compact right angle impact driver for

fastening and loosening in tight spaces• Makita built motor and impact

mechanism produces 531 in. lbs. ofmaximum torque and 0–3,000 IPM

Capacity Hex Shank 1/4"No Load RPM 0–2,000Impacts/Min.(IPM) 0–3,000Torque (in.-lbs.) 531Watt Hours 54.0Battery (Ah) 3.0 (Li-Ion)Length 15-1/4"Net Weight (lbs. w/battery) 3.7

029SS 5/19/10 3:28 PM Page 29

30

Power Tools

• Utilizing a carbide tipped blade as opposed toan abrasive wheel, the depth of cut remainsconstant throughout blade life by eliminatingthe need for frequent wheel changesassociated with abrasive wheel cutting

• Multi-Cutter™ cuts 4 times faster than chopsaws and 8 times faster than portableband saws in 2" x 2" x 1/4" angle iron

• 14" 70 tooth carbide tipped blade

Chop Saw

DW872Heavy-Duty 14" Multi-Cutter™ Saw

Amps 15.0 AC/DCHorsepower 4.0 HPNo Load Speed 1,300 rpmWheel Diameter 14"

Max Capacity (Round) 5-3/16"Max Capacity (Rectangular)6-1/2" x 4-1/2"Includes: 14" carbide tipped blade,wrench and vertical clamp

Cut-Off SawCut-Off Saw

2414NB14" Portable Cut-Off Saw

Chop SawD28715Heavy-Duty 14" Chop Saw w/ Quick-Change Keyless Blade Change System

Amps 15.0 AmpsNo Load Speed 4,000 rpmSpindle Lock Yes Quick Lock Vise Yes Wheel Arbor 1

Wheel Diameter 14"Max Capacity (Round) 5"Max Capacity (Rectangular) 4-1/2" x 6-1/2"Tool Length 21"Tool Weight 39.0 lbs

• 15.0 Amp/4.0 HP (maximum motorHP) motor provides overloadprotection

• Ergonomically designed horizontal“D” handle

• Quick-lock vise • 45° pivoting fence • Steel base

Multi-Cutter Saw

D28700Heavy-Duty 14" (355mm) Chop Saw

Amps 15.0 AmpsNo Load Speed 3,800 rpmSpindle Lock Yes Quick Lock Vise Yes Wheel Arbor 1"

Wheel Diameter 14"Max Capacity (Round) 4-1/2"Max Capacity (Rectangular) 4-3/4 x 5-1/3"Tool Length 21"Includes: 14" abrasive wheel and wrench

• 14" Abrasive Cutoff Machine Kitincludes model 1365, masonrycutting wheel, metal cutting wheel,metal case

Rating 120V ACAmperage 15.0Max. Motor Horsepower 4.7No Load RPM 4,300

Wheel Size 14"Depth of Cut 4-7/8"Spindle Thread 5/8"-11

• Powerful 15.0 Amp/5.5 HP (maximummotor HP) motor

• Quick-Change Blade Change System • Patented Quick-Fence™• Quick-lock vise

SAWS

Cut-Off Saw

• Lock-off button to prevent accidentalstarting

• Spark diversion guard for operator’s safety• Guide plate adjusts 45° right and left—

3 locations for various sizes of materials• Quick release vise for secure stock

retention and fast repeated cut-offs• Socket wrench stores on base for

convenience • Adjustable depth stop for precise,

repeatable cutting depth • Shaft lock for easy wheel changes

• 15.0 Amp/5.3 HP (maximummotor HP) motor provideshigh power and speed formetal and concrete cutting

• Epoxy coated field andarmature provide long servicelife against abrasion fromdebris

• Rotation directs sparks anddebris towards the front ofthe tool and helps preventclimbing in the cut

Amps 15.00Max Capacity (Round) 5"Tool Length 23.9"Tool Weight 24.7 lbs

Includes: wrench, masonry wheel, metalcutting wheel and integral dust duct

1365K14" Abrasive Cutoff Machine Kit

D28755Heavy-Duty 14" Cut-Off Machine

030SS 5/19/10 3:28 PM Page 30

31

Power Tools

Gas Demo Saw

Part No. DescriptionDPC7321 14" Power Cutter 73 cc. (Smooth Start)

Engine Displacement 4.5 cu in.Maximum HP 5.6No Load RPM 9,350

Fuel Fuel Mixture 50:1Blades Max. Spindle Speed 4,300 RPM

Wheel Diameter 14"Max. Cutting Depth 4-13/16"

Standard Equipment14" Cut-off WheelUniversal WrenchTorx wrenchScrewdriverAdaptor Ring

Miter Saw

Part No. DescriptionDW713 Heavy-Duty 10" (254 mm) Compound

Miter Saw

• 15.0 Amp motor, 5,000 rpm delivers extendedpower and durability

• Stainless steel detent plate with 11 positivestops improve productivity and ensurescutting accuracy

Amps 15.0No Load Speed 5,000 rpmBlade Diameter 10"Includes: carbide blade, dust bag andblade wrench

Miter Saw

Part No. DescriptionDW716 Heavy-Duty 12" (305mm) Double-Bevel

Compound Miter Saw

• 15.0 Amp, 3,600 rpm motor delivers extended power and durability• Adjustable stainless steel miter detent plate with 11 positive stops

Improves productivity and ensures cutting accuracy• Precise Miter System and Machined Base Fence Support optimizes

cutting accuracy

Amps 15.0No Load Speed 3,600 rpmBlade Diameter 12"Arbor size 5/8" or 1"Includes: carbide blade, dustbag and blade wrench

Miter Saw

Part No. DescriptionDW715 Heavy-Duty 12" (305 mm) Single-Bevel

Compound Miter Saw

• 15 Amp motor, 4,000 rpm • Adjustable stainless steel miter detent plate with 11

positive stops • Exclusive Precise Miter System and Machined Base

Fence Support • Tall sliding fence

Amps 15.0No Load Speed 4,000 rpmBlade Diameter 12"

Includes: carbide blade, extension kit,dust bag and blade wrench

Tool Width 10 1/4"Tool Height 7 1/2"Tool Weight 35.0 lbsShipping Weight 40.0 lbs

Includes: 2 convertible worksupports/stops.

Miter Saw not included

Miter Saw Stand

Part No. DescriptionDW723 Heavy-Duty Miter Saw Stand

• Universal design works with all brands of miter saws• Lightweight aluminum construction• 5 1/2' beam extends to support up to 16 ft. of material and up to 400 lbs.

SAWSMiter Saws

Amps 15.0No Load Speed 3,600 rpmBlade Diameter 12"Arbor Size 5/8" or 1"

• Powerful 15 Amp, 3,600 rpm motordelivers extended power and durability

• Adjustable stainless steel miter detentplate with 10 positive stops improvesproductivity and ensures cutting accuracy

• Precise Miter System and Machined BaseFence optimizes cutting accuracy

Part No. DescriptionDW718 Heavy-Duty 12" (305mm) Double-Bevel

Sliding Compound Miter Saw

031SS 5/19/10 3:28 PM Page 31

32

Power Tools

SAWSMiter SawMiter Saws

Table Saws

• Dual post compound pivoting arm• Bevel cuts up to 45° to the left• Miter cuts 0–45° left and 0–52° right• Positive stops at 9 settings; 15°, 22.5°,

30°, 45°, right or left and 0° (90° cuts)

Blade diameter 10" Arbor 5/8" No Load RPM 4,600AMPS (115V) 15.0

Part No. DescriptionLS1040N 10" Compound Miter Saw Includes:

Socket wrench, carbide-tipped blade, dustbag and triangular rule

Table Saws

Rating 120VHertz 60Amperage 15.0Max Motor HP 4.4No Load RPM 3,650/min

Standard Equipment:40-Tooth Carbide blade,Blade Wrench, Hex Key andMiter Gauge

• Powerful 15 Amp, 4.4 HP max. tool output Power to tackle any material• Precision rip fence with patented “square-lock” technology provides

accuracy with every cut• Soft start for quieter, smoother start-ups

Part No. Description4100 10" Worksite Table Saw (stand not included)

Table Saws

Table Saw Stand

• 15 Amp motor • 16" of rip • Rack and pinion fence design• Weighing only 45 lbs.

Part No. DescriptionDW745 10" Compact Job Site Table Saw

Part No. DescriptionLS1013FL 10" Dual Slide Compound Miter Saw with

Laser and Fluorescent Light. Includes carbidetipped blade, vertical vise, socket wrench #13,dust bag, triangular rule, 2 extension wings

Blade diameter 10"Arbor 5/8"No Load RPM 3,700AMPS 15.0

• Built-in laser with micro fineadjustments clearly indicates line ofcut; independent switch allows laser tobe seen independently of blade rotation

• Built-in high output fluorescent lightilluminates work area

• Exclusive, telescoping fence delivers24-1/2" rip capacity without sacrificingportability

• Rack and pinion design makes fenceadjustments fast, smooth and accurate

Part No. DescriptionDW744S Heavy-Duty 10" Portable Table Saw with StandDW744XRS Same as above w/DW7440RS Stand

Part No. Description4100-09 Bosch 10" Worksite Table Saw with Gravity-

Rise™ Wheeled Stand

Amps 15.0No Load Speed 3,650 rpmBlade Diameter 10"Arbor Size 5/8"

Includes: 10" 24-tooth carbide blade, portable table saw stand and miter gauge

• The Gravity-Rise™ Standbrings the unit into an uprightor folded position

• Well-balanced for transport• Largest table top in its class—

29" x 21-1/2"• Precision rip fence with

patented “square-lock”technology

• Constant Response™ circuitry • Soft start • Wide ripping capacity• Exclusive arbor lock• Gravity-Rise™ Stand• Rugged and portable stand• Universally adaptable

Amperage 15.0No Load RPM 3,650Blade Diameter 10"Arbor Size 5/8"Depth of Cut at 90° 3-1/8"Depth of Cut at 45° 2-1/2"Bevel Angle Range -2° to 47°Height 13" (37-1/2" with stand)Ripping Capacity-Right 25"Ripping Capacity-Left 9"Max. Motor HP 4.4

• Lightweight design weighs only 33 lbs. • Heavy-duty kick stand • Quick connect stand brackets • Wide stand base and offset rear legs• Heavy-duty aluminum construction

withstands loads up to 200lbs.

Part No. DescriptionDW7440RS Heavy-Duty Rolling Table Saw Stand

032SS 5/19/10 3:28 PM Page 32

33

Power Tools

Blade Diameter 10"Arbor 5/8"Speed 4000 rpm Max. Depth of Cut 3-1/8"Max. Depth of Cut at 45° 2-1/8"Max. Rip to Right of Blade 50"Max. Rip to Left of Blade 12"Max. Width of Dado 13/16"Table Height 34-1/2"Overall Height 39-1/2"Overall Width 84"Overall Depth 75"Weight 593–642 lbs.

Motor 1 HPCapacity (ht. under guide) 6 1/4"Frame to blade 13 3/4"Under guide and wheel 6 1/4"Speed 2500/3000 sfpm Table Size 16" x 16"Blade Width 3/4"Height 65-1/2"Width with open stand 31"Front to rear 17 1/2"Weight 201 lbs.

36-L31X-BC50 Delta X5 3 HP Left Tilt Unisaw with Biesemeyer FenceIncludes left tilt 3 HP, singlephase 230V, TEFC motor withfull voltage motor starter (GPE);50" Biesemeyer commercialfence system, carbide-tipped50 tooth ATB&R saw blade,right extension table, adjustablesteel support legs, two 10"cast-iron extension wings,standard insert, miter gage,motor cover, 4" dust connectorand instruction manual.

Speed 215–2720 rpmSpindle Taper Jacobs 33Quill

Diameter 1-3/4"Stroke 4-7/8"

Key chuck 5/8"Chuck to Table 24-1/2"Working Surface 10-1/4" x 11-1/2"Overall Height 68"Overall Width 14"Overall Depth 27-1/2"Weight 195 lbs.

17-96516-1/2" Drill PressIncludes basic machine with3/4HP, 120/240V, inductionmotor; 5/8" capacity chuck andkey, rack and pinion tableraising/lowering mechanism,external depth stop andinstruction manual. Motor Specs 115V/230V; 60 Hz

Blade Diameter 10"Arbor 5/8"Speed 3,000 rpmMax. depth of cut at 90° 3-1/8"Max. depth of cut at 45° 2-1/8"Max. rip to right of blade 30"Max. rip to left of blade 13-1/2"Max. width of dado blade 13-16"Blade tilt direction LeftHeight 39-1/2"Width 40-1/2"Depth 38-1/2"Weight 234 lbs

36-98010" Left Tilt Contractor’sSaw® with Delta® T2 30"Fence, Rail and Two Cast-Iron Table Wings

Includes 1-1/2 HP, 115V/230Vmotor, two cast-iron extensionwings, deluxe miter gauge,mobility kit, see-thru bladeguard with splitter and anti-kickback fingers, 10" sawblade, table insert, V-belt arborpulley, heavy-duty steel stand,dust collection insert, DELTA®

T2 30" Fence and Rail andinstruction manual.

Cutting CapacityWidth 6 1/8"Depth 1/8"Rabbeting 1/2"Cutterhead Speed 4800 rpm,

14,400 cpmNumber of Knives 3Diameter 2-1/2" Table Length 46"Fence Size 4-7/8" x 35"Tilts In and Out 45° right and leftPositive Stops 90°, 45° R & LWeight 225 lbs.

37-275XDelta X5 6" Professional Jointer

Includes a 1 HP, 120/240V,induction motor; enclosedstand, dust collector connector,center-mounted fence, 3-knifecutterhead, cutterhead guard,push blocks and instructionmanual.

Motor Specs 3450 RPM, 120/240V, single phase, 60 Hz

Impeller Diameter 11.5"Filter Bag Area (Total) 20.5 sq. ft., Standard Bag Filtration 1 Micron Chip Bag Area (Total) 2.4 cubic feetLength 35"Width 19"Height 83"Box DimensionsLength 36.1"Width 19.7"Height 18.3"Weight 100 lbs.Max. Static Pressure

(in water) 8Decibel Rating 88 dB

50-7601.5 HP Dust Collector 1200 CFM

Includes motor and blower,support frame, 1 micronfiltration bag, (2) 6 mil plasticchip collection bags, (2) snap inbag rings, (2) 4" intake ports,(4) swivel caster assemblies,cord and plug and instructionmanual.

28-20614" Band Saw with 1HP Motor &Enclosed Stand

033SS 5/19/10 3:29 PM Page 33

34

Power Tools

Hand Planer

Part No. DescriptionDW680K Heavy-Duty 3-1/4" Planer Kit

with 3/32" (2.5mm) Depth of Cut

Part No. Description100 7/8 Peak HP Router

Part No. Description893PK 2-1/4 Peak HP Multi-Base Router Kit

No Load Speed 15,000 rpmAmps 7.0Planing Width 3-1/4"Rabbeting Depth 1/2"Includes: Two Reversible CarbideBlades, Rabbeting Fence andHeavy-Duty Kit Box

Amps 6.5No Load Speed 10,000 rpmArbor Size 7/8"Biscuits Accepted 0, 10, 20Includes: Kit Box, Carbide Blade,Dust Bag, Vacuum Adapter, Torx®

Key and Wrench

Routers

Part No. DescriptionDW682K Heavy-Duty Plate Joiner Kit with Kit Box

Biscuit JointerLaminate Trimmer

Routers

• Heavy-duty 7.0 Amp motor • 3/32" (2.5mm) maximum cut in one pass • Accepts large resharpenable high speed steel blades • Calibrated Depth Adjustment Knob

• 6.5 Amp, AC/DC• 22,000 RPM• 1/4" collet• Precision machined aluminum

motor housing & base• Accurate micrometer depth-of-

cut adjustment• 100% sealed ball bearings• Standard Equipment: Router

motor, base #1001, 1/4" collet#42154, collet wrenches #42157,and operating manual

• Dual rack and pinion fence• Integral one-piece fence is adjustable and tilts 0-90°• Flush cuts can be made at 0° without removing fence• 45° locating notch in fence allows indexing off the outside

surface of a mitered joint

Part No. Description7310 Laminate Trimmer

• 5.6 Amps, AC/DC• 30,000 RPM• 1/4" collet• Spindle lock• Precision cast aluminum base • Micro-set™ depth-of-cut

adjustment knob• 100% ball bearing construction• Standard Equipment: Trimmer motor,

base #7309, collet wrench #44745,and operating manual

• Soft-starting, 12-amp motorfeaturing full-time electronicfeedback (10,000–23,000RPM)

• Motor transitions quicklybetween fixed base(included), plunge base(included), and traditional spi-ral down bases (690 series)

• Dual-position on/off switchwith automatic bit-changing lock-“off”

• Macro-height lever for coarse adjustments and tool-lessmotor release

• Fine depth settings to 1/128" with micro-adjustment knob• Plunge base features thumb rotating stop turret, brass

bushings, finger adjustable micro-depth stop, and through-the-base dust collection

• 12.0 amp motor• Designed for flush sanding up to vertical

surfaces• Belt speed of 1,500 SFPM• Quick-release belt change lever• Fingertip belt tracking knob• Large capacity dust collection bag• Standard Equipment: Sander,

100G zirconium black belt, dust bag assembly #39334 and operating manual

Electric Belt Sander3" x 24"

Part No. 360

034SS 5/19/10 3:29 PM Page 34

35

Power Tools

Part No. Description78121 Replacement bag for 781278117 Replacement filter for 7812

Part No. Description7812 10 Gallon Wet/Dry Vacuum

Part No. 7800

Amps 3.0Orbits/Min 12,000 opmOrbit Diameter 3/32"Dust Collection Yes

Paper Size/Type 5", 8 HoleHook & Loop

DW421K includes: Dust Bag, VacuumAdapter and a heavy-duty kit box

• Pistol-grip shear cuts 14 gauge mild steeland most grades of stainless to 16 gauge.

• Cuts at over 150 inches per minute.

• 3.0 Amp motor operates at 12,000 opm• Textured anti-slip top & body grip• Controlled Finishing System® maintains

pad speed and minimizes gouging duringstart up

• Dust-sealed switch prevents contamination

• Sealed 100% ball-bearing construction• High capacity dust bag with built in

vacuum adapter• Dual plane counter-balanced fan• Accepts 5", 8-hole hook and loop paper

• Variable-speed dial (1,400–2,000 RPM)• Built in dust collection hose• 1-1/4" vacuum hose is 13' long• Standard Equipment: Sander, 100G sand-

ing pad, 13' static-dissipating 1-1/4" vac-uum hose, hook & loop straps formounting power cord to vacuum hose,and operating manual. Vacuum notincluded.

• Powerful 9 Amp motor• Vacuum delivers 99.85% filtration effi-

ciency• Built-in outlet for use with power tools• Includes 15 second vacuum overrun to

clear hose when tool is turned off• Dual filtration system with washable auto-

motive-type paper filter and 2-ply ten-gal-lon paper filter bag for dust pick-up

Electric Shears KD-495 Fiber Cement

Double-Cut Shears KD-200

Variable Speed Shears KD-440

Panel Cutting Saws KS-23AM

Random Orbit Sander Kit

Sander

Wet/Dry Vacuum

The KD-495 single speed 5 amp modelcomes with an aluminum cutting head toprovide fast cutting of up to 5/8" backerboard or fiber-cement board with no air-borne dust and minimal clean-up. The long lasting A-2 toolsteel blades last longer and cut cleaner thanexpensive carbide tipped saw blades.

It easily follows a scribed line-edges are nothardened or burred. The swiping action ofblades seals the edge of coated metals.These shears cut sheet metal up to 18gauge in straight or contour lines at 180inches per minute and plastic or Formicaup to 3/32" thick. 5 amp, 120 volt, 2500rpm.

The KS-23AM allows you to cut from zeroto full 3/8" depth with 2" diameter and 5/8"with 2 1/2" diameter high-speed steel sawblades. This saw handles mild steel to 16gauge; aluminum to 3/16"; and plastics to1/2". Powered by a “D” handle, heavy dutyindustrial type 3/8" capacity 5.5 amp elec-tric motor.

Head Capacity Motor Max RPM Power Source40-20 14 ga. mild steel/ 253-49 2500 120V

16 ga. stainless

Part No. DescriptionD26451K Heavy-Duty 5" Random Orbit Sander With Kit Box

Part No. D26451K

Part No. KD-495

Part No. KD-200

Part No. KD-440

Part No. KS-23AM

Head Capacity Power Source/RPM Length/Weight95-20 5/8" Cement Board 5 amp / 120 Volt 2500 rpm 15" / 5 lbs

035SS 5/19/10 3:29 PM Page 35

36

Power Tools

BHR24018V LXT Lithium-Ion 7/8" Cordless SDS-PlusRotary Hammer Kit

LXT407 Kit18V LXT Lithium-Ion 4-Pc. Combo KitLXT Lithium-Ion battery and optimumcharging system produces 280% totallifetime work with 2x more cycles

• 1⁄2" Hammer Driver-Drill has a new 4-polemotor for 560 in. lbs. of torque & weighsonly 4.9 lbs.

• 6-1/2" Circular Saw has a D35 high torque motor, built-in blower and is 7.1 lbs.• Recipro Saw with tool-less blade changes & shoe adjustments, skyhook and

8.2 lbs.• 4-Position Flashlight with Xenon bulbs runs 5 hrs.• 3-year warranty on tools and 1-year warranty on battery

LXT21118V LXT Lithium-Ion 2-Pc. Combo KitLXT Lithium-Ion battery and optimumcharging system produces 430% totallifetime work with 2.5x more cycles

• 2-Speed 1/2" Hammer Driver-Drill (0–400/0–1,500 RPM) with Makita-built 4-pole motor delivers 450 in.lbs. of torque and weighs only 4.2 lbs.

• Variable speed Impact Driver (0-2,300 RPM) provides 1,330 in.lbs. of torquein a compact design and weighs only 3.4 lbs.

• 3-year warranty on tool and 1-year warranty on battery and charger

BPB18018V LXT Lithium-Ion Portable Band Saw KitLXT Lithium-Ion battery and optimumcharging system produces 280% totallifetime work with 2x more cycles

• Makita built motor delivers 50% fastercutting with 6-setting variable speed dial at 275–530 ft./min.

• Adjustable foot protects material & provides positive support for accurate cuts• More compact design at only 20-5/8" long and weighs only 14.1 lbs. for less

operator fatigue• Ergonomic shape fits like a glove with even pressure and easy control• LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use

any time) and 16 firm holding contact terminals (for constant high power)• 45-minute Optimum Charger and battery communicates throughout the

charging process using the built-in chip in the battery and built-in CPU chip inthe charger. The Charger also uses “Active 3 Control” for current control,thermal control & voltage control

• 45-minute Optimum Charger has a built-in fan to cool the battery to producemore lifetime work

• Two built-in L.E.D. lights with afterglow illuminate the line of cut• Built-in protective rubber bumpers• Built-in skyhook• 3-year warranty on tool and 1-year warranty on battery

DA3010F3/8" Angle Drill with L.E.D. LightLight Up Your Drilling Surface with High Output L.E.D. PowerBuilt-in shock proof, high output, white L.E.D. light illuminates drilling areaand increases visibility with a bulb that never needs replacing throughout thelife of the tool

• Powerful 4.0 AMP motor and lightweight (3.1 lbs.)• Compact (10-5/8" length) design for easy use when working between framing

studs or any other close quarter application• Variable speed (0–2,400 RPM) for controlled drilling in wood/metal and

speedy fastening• Paddle switch with speed limiting dial to prevent over tightening of fasteners

and for easy one-handed operation• Reduced head height (2-5/8") for working in limited space• Ball bearing construction for longer motor life

LXT Lithium-Ion battery and optimum charging system produces 280% totallifetime work with 2x more cycles

• 3-Mode Switch for rotation only, hammering with rotation, or hammering only• 2x faster drilling with synchronized RPM and BPM for more efficient drilling• Built-in torque limiter clutch disengages if bit jams when hitting rebar• Chisel rotates 360° with 40 different positions to get the best working• More compact design at only 16-1/8" long and weighs only 7.1 lbs. for less

operator fatigue• Ergonomic shape fits like a glove with even pressure and easy control• LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use

any time) and 16 firm holding contact terminals (for constant high power)• 45-minute Optimum Charger and battery communicates throughout the

charging process using the built-in chip in the battery and built-in CPU chip inthe charger. The Charger also uses “Active 3 Control” for current control,thermal control & voltage control

• 45-minute Optimum Charger has a built-in fan to cool the battery to producemore lifetime work

• 3-year warranty on tool and 1-year warranty on battery

BCS55018V LXT Lithium-IonCordless 5-3/8" Metal Cutting Saw KitLXT Lithium-Ion battery and optimumcharging system produces 280% total lifetime work with 2x more cycles

• Cuts Unistrut® all thread, channel, corrugated, conduit, pipe, sheet metal,square tubing, steel and more

• Makita built, high torque motor produces 3,400 RPM for faster metal cutting• Compact design at only 12" length and weighs only 6.4 lbs. for less operator

fatigue• Ergonomic shape fits like a glove with even pressure and easy control• LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use

any time) and 16 firm holding contact terminals (for constant high power)• Rapid Optimum Charger and battery communicates throughout the charging

process using the built-in chip in the battery and built-in CPU chip in thecharger. The Charger also uses “Active 3 Control” for current control, thermalcontrol & voltage control

• Rapid Optimum Charger (25 minutes for 3.0 Ah batteries) has a built-in fan tocool the battery to produce more lifetime work

• Built-in LED lights illuminates the work area• 3-year warranty on tool and 1-year warranty on battery

036SS 5/19/10 3:29 PM Page 36

37

Power Tools

9077SL7" Angle GrinderSuper Joint System(SJS) helps preventgear damage“Tool-less” Rotating RearHandle for OperatorComfort

• Powerful 15 AMP motor delivers high torque for industrial work• 6,000 RPM for fast stock removal• All ball bearing and labyrinth construction seals and protects the motor from

dust and debris• “Tool-less” wheel guard for easy adjustment• Sealed gear housing protects and spindle for longer tool life• Double insulated

9564/9564CV4-1/2" Angle GrinderSuper Joint System (SJS)helps prevent gear damage9.5 AMP motor design for highoutput power in a morecompact tool

• All metal gear housing for added protection• Larger and improved carbon brush material for longer tool life• “Tool-less” wheel guard adjustment for easy clamping• Labyrinth construction seals and protects the motor and bearings from dust

and debris by creating a complex set of channels

Variable speed (0–3,000RPM) with pre-setmaximum speed dial; ideal for ultra slow polishing

• Pre-set speed setting dial (from 600–3,000 RPM) for maximum control• Electronic speed control maintains constant speed under load• Easily converts to a sander• 3 prong plug to prevent static electricity accumulation• Fast and powerful polishing for clearcoat finishes• Lock-on button for continuous use at one speed• Shown with optional wool bonnet

9227C7" ElectronicSander-PolisherFast and PowerfulPolishing for Clearcoat Finishes

5 stage variable speed controldial for matching the RPM tothe work

• Improved 12 AMP motor design for increased output power in a morecompact tool

• Larger and improved carbon brush material for longer tool life• Electronic limiter stops the motor and prevents accidental motor overload and

burnout• “Tool-less” wheel guard adjustment for easy clamping• Labyrinth construction seals and protects the motor and bearings from dust

and debris by creating a complex set of channels

9565CV5" Angle GrinderSuper Joint System (SJS)helps prevent gear damage

15 AMPS to handle the toughestindustrial applications

• Protective zig-zag anti-dustvarnish seals the motor fromdebris by forming an impenetrable barrier under rotation for longer life

• Labyrinth construction seals the motor from dust and debris by creating acomplex set of channels prohibiting contamination

• Dust-proof bearing prevents dust and debris from getting into the gears• Externally accessible brushes for greater serviceability and longer motor life• Rotatable gear housing rotates 90° for cutting applications• Large rubber tool rest for added convenience• Great for Welders, Fabricators, Masons, Maintenance/Repair and more

Quick switch drill head for low (0–400 RPM) or high (0–900 RPM) speed

• Powerful 7.5 AMP motor for improved performance• Ergonomically designed rubberized grip for comfort• All ball bearing construction for long tool life and smooth operation• Angle attachment may be removed and drill used as a straight drill• Trigger sensitive variable speed switch for precise control

DA4000LR1/2" Angle Drill(Variable Speed,Reversible)Angle AttachmentRotates 360° to Drill inAny Position

GA70207" 15 AMP Motor and Labyrinth Construction

037SS 5/19/10 3:30 PM Page 37

38

Power Tools

Table Saws• Right extension table• Aluminum die cast, precision

machined table top• Large cutting capacity (3-5/8" at

90° and 2-1/2" at 45°)

• Powerful 15 AMP motor • Large on and off switch and

easy to read scale • Complete storage capacity

Part No. Description2704X1 10" Table Saw Cuts 4x Material

No load speed 4,800 RPMAMPS (115V) 15.0Includes: Carbide TippedBlade, Rip Fence, Angled MiterGauge, Wrench #5, Wrench#19, Socket Wrench #13-22,Portable Table Saw Stand

Reciprocal Saw

Circular Saw

• 4-position orbital/straight cuttingaction

• Variable speed dial for presettingmaximum speed

• Powerful 15 AMP motor withelectronic speed control

maintains constant speedunder load

• Long 1-1/4" stroke for fastercutting

• Tool-less blade change andshoe adjustment

Part No. DescriptionJR3070CT Long 1-1/4" Stroke for Faster Cutting

Length of stroke 1-1/4"Strokes per minute 0–2,800AMPS 15.0Length 19-1/8"Net Weight (lbs.) 9.7

Includes: 1 ea. Blade , Metaltool case

• Weighs only 28.7 lbs.• Electric brake • Powerful motor delivers 1,800

max watts out• Low noise level at only 87dB

• Blade stabilizer • Large depth control lever • Large support handle • Carbide tipped blade

Part No. Description5402NA 16-5/16" Circular Saw (With Electric Brake)

Blade Diameter 16-5/16"Arbor 1"Max. Cutting Capacityat 90° 6-1/4"at 45° 4-3/16"

No Load RPM 2,200

Includes: 32 Tooth CarbideTipped Blade, Hex Wrench #6,Rip Fence

Planer Kit• Redesigned 4 AMP motor • Weighs only 5.5 lbs.

Part No. DescriptionN1900B 3-1/4" Planer Kit

Planing Width 3-1/4"Planing Depth 1/32"No Load RPM 15,000

Includes: Blade GaugeAssembly, Socket Wrench,Guide Rule, Double-EdgedCarbide Blade Set, Plastic Tool Case

Table Saws• Built-in laser • Built-in high output fluorescent

light • Powerful, direct drive 15 AMP

motor

• 9 positive stops • Electronic speed control • Single cast aluminum base • Long slide track and wide

pivot angle

Part No. DescriptionLS1214FL 12" Dual Slide Compound Miter Saw

with Laser and Fluorescent Lights

Includes: 12" Dual SlideCompound Miter Saw withLaser and Fluorescent Light,12" x 70T Carbide-TippedBlade, Vertical vise, (2)Extension wings, Sub-Fence, Dust Bag, Socket Wrench #13,Triangular Rule

Table Saws

• Large 27" x 22" table• Electric brake for maximum

productivity• Dead-on cam locking rip fence• Large handle for quick and

accurate depth setting• Precise rack and pinion bevel

adjustment• Positive stops at 90° and 45°• Rips 4x material on a single pass

Part No. Description2703X1 10" Table Saw with Electric Brake w/Stand122731A Portatable (Optional)

038SS 5/20/10 3:49 PM Page 38

39

Power Tools

C10FSH 10" (255mm) Slide CompoundSaw with laser markerfor USA and Canada• Laser marker for easier

alignment with ink line • Positive angle stoppers for easy

adjustment of the turn tableposition for miter cutting (At theright and left of the 0° centersetting, at 15°, 22.5°, 31.6°, and45° settings)

• High sub fence (3-9/16" (90mm)height)

• Legibly labeled angle scale andbevel scale

• High dust collectingperformance

• Splinter guard, also serving forcut alignment

• Electronically controlled softstart and constant speed forsmooth, accurate cutting, finesurface finish, and low noiseoperation

• Poly V-belt and motor drivingsystem for longer service life

C7YAH7-1/4" Dust Reducing Circular Saw Equipped with PCD HardiBlade

• One of the most efficient dustcollection saws on the market

• Ergonomic dust collectionshroud, keeps work area clearof over 90% of debris

• Dust removal options, includesdust bag, vacuum or dustdeflector to keep the work areaclean and reduce airborneparticles

• Hardiblade optimal,recommended to easily cut fibercement siding products

• Nickel plated cast aluminumbase, resists scratching fibercement siding products

• 13 Amp motor, forcible powerfor the toughest cutting jobs

• Cutting line indicator, highlyvisible sight lines at 45 and 90degrees for duplicate precisioncuts

• Carbon brush access, allowsuser to replace brush as neededto greatly prolong the life of thetool

C12LSH (with digital display and laser marker)

12" (305mm) Slide Compound Sawfor USA and Canada • Powerful 15 amps (full-load

current) motor and aggressivetool design

• Compact body thanks to thenew sliding system: Operableeven in tight places because thedepth of the main unit is930mm(36-5/8")

• Display panel that indicatesmiter / bevel angles (onlyC12LSH)

• Laser guide system for easieralignment with the ink line (onlyC12LSH and C12RCH models(Caution: DO NOT STAREINTO BEAM CLASS II LASERPRODUCT)

• Bevel and Miter angle fineadjustment

• Positive angle stoppers for easyadjustment of the turn tableposition for miter cutting (At theright and left of 0°, 15°, 22.5°,31.6°, and 45° setting)

• Conveniently positioned bevelangle locking mechanism

• 120 mm (4-11/16") high subfence supports the workpiecewidely for stable cutting

CR13VBYReciprocating Saw (Saber Saw)

• Higher cutting speed, heavy-duty motor and swing cuttingaction

• 2-mode cutting: Straight cuttingaction and swing cutting action

• Double-molded front cover andD-handle for comfortablegripping

• One-hand and quick blade-change by “Turn and Open-lock” keyless-Blade-Clamp

• Push button adjustable shoehelps blade last longer

• Variable speed control (Presetdial and trigger-stroke) to meetvarious cutting materials

C 7SB27-1/4" (185mm) Circular Saw

• Powerful motor with ratedcurrent 15 amp(120V)

• 24-tooth Hitachi carbide-tippedsaw blade

• AC/DC switch• Wider bevel-capacity cuts up to

55° with a positive stop 45°• Easy access bevel adjustment

with lever• Heavy duty aluminum base with

scale

• Soft and comfortable grip• Lightweight 10.1 lbs.(4.6Kg);

Magnesium alloy-dicasting gearcover, blade guard and lowerguard

• Spindle Lock

Amps 9.5No-Load Speed 5,500 RPMBlade Diameter 8-1/2"Arbor Size 5/8"Bevel Angle Range Right 0°–5°

Left 0°–48°Miter Angle Range Right 0°–57°

Left 0°–45°Miter Detent Stops (R & L) 15°, 22.5°, 31.6°, 45°

C8FSE8-1/2" Sliding Compound Miter Saw

• Positive miter stops for quickadjustments to 15°, 22.5°, 31.6°, and45° to the left and right.

• Precise compound cuts with 48°bevel angle left and 5° bevel angleright

• Only 31lbs for lightweight portability• Powered by a 9.5Amp motor with a

no-load speed of 5,500 RPM tosmoothly handle the toughest cuttingapplications

039SS 5/19/10 3:30 PM Page 39

40

Power Tools

DH38YE1-1/2" Rotary Hammer, 2-Mode, Spline Shank• 5.2 ft-lbs of impact energy,

delivering high-speed drillingand forcible chipping

• 8 Amp motor, increasesproductivity

• 2-modes of operation, hammer& drill and hammer only forflexibility within a range ofapplications

• Sealed grease system, ensuresminimal maintenance

• Dust proof cover, protects toolfor extended maintenance freeoperation

• Auto-stop carbon brush system,replaceable to prolong tool lifeand protect armature

• Removable side handle withdepth gauge, improves controland ensures accurate drillingdepth

DH50SBK2" Spline Shank Rotary Hammer• 9.6 ft-lbs of impact energy,

delivering high-speed drillingand forcible chipping

• 10.4 Amp motor, increasesproductivity and power

• 2-modes of operation, hammer& drill and hammer only forflexibility within a range ofapplications

• Exclusive “mouth less idle”hammering mechanism,requires less pressing force andreduces wear and tear on tool

• Sealed grease system, ensuresminimal maintenance

• Auto-stop carbon brush system,replaceable to prolong tool lifeand protect armature

• Soft, non-slip Elastomer grip D-handle, absorbs vibration andimproves comfort and handling

• Removable D-shaped sidehandle, minimizes fatigue

• Bar type side handle, improvescontrol

DV 18DL18V Cordless Impact Driver Drill(3.0Ah Li-ion Battery)

• Compact, 4.8lbs. (2.2kg)lightweight and 9-27/32"(250mm) overall length

• Powerful Motor Max. Torque570in-lbs (64Nm)

• Fan-cooled Motor for highpower and improved durability

• 3-Mode settings: Drilling, ImpactDrilling, and Driver

• 1/2" (13mm) keyless chuck isoperable with one hand andequipped with ratcheting lockmechanism

• 22-Stages adjustable clutchtorque setting

• Two (2) step action Switch lever(Power mode/Save mode)

• Electric feedback and brake • Push button type reversing

switch

• Externally replaceable carbonbrushes and separate-typemotor

• Slip-resistant and comfortablesoft grip handle

• Convenient 5-position Belt Hookwith LED light (The specificationmay vary from country tocountry)

• 18V High Capacity Battery: 3.0Ah Lithium-ion EBM1830

• The EBM1830 Li-ion battery forlong life (approx. 1500 batterylife cycles)and lightweight

• The Li-ion battery is equippedwith overdischarge, overheatand overcharge protection

FDV16VB2(5/8") 16mm Impact Drill• 550W (5.0A/120V) Powerful

motor and 3.5 lbs. (1.6Kg)lightweight

• Ball and needle bearingsemployed for all bearings toensure outstanding durability

• Easy-to-select change knob forquick selection of impact drillingor drilling only mode

• 2-finger sized trigger withvariable speed control

• Push-button typeforward/reverse changeoverswitch

• Nonskid large soft grip forcomfortable operation

CC12Y12" Portable Cut-Off Saw, Portable AC/DC• 15 Amp motor, forcible power

for tough cutting jobs • 4” max cutting depth, for

efficient cutting performance • Replaceable cutting wheel,

without removal of base forquick changes

• Wide base, provides extracutting stability

• AC/DC, adds flexibility invarious locations

• Ball and needle bearingconstruction, for addeddurability

• Auto stop carbon brushes,protect armature and extendtool life

• 23.1 lbs, portable designfacilitates maneuverability andease of use

WH 18DL18V Cordless Impact Driver(3.0Ah Li-ion Battery)

• Compact, lightweight 3.5 lbs.(1.6kg) and short body 6-3/8"(162mm)

• Powerful design, class-toptightening speed and tighteningtorque 1,330 in-lbs. (150N-m)

• Powerful large cooling fan forhigh-motor durability

• High durability, dust resistanceand long service life

• Protector protects work piecesfrom scratches and stains, andhas high heat resistance

• Slip-resistant and comfortablesoft grip handle

• Convenient 5-position Belt Hookwith LED light

• Variable speed switch withelectric feedback and brake andforward/reverse changeoverpushing button

• Two(2) step action Switch lever(Power mode/Save mode) (Thespecification may vary fromcountry to country)

• Externally accessible carbonbrushes for easy replacement

• Advanced case for excellentaccommodation

• 18V High Capacity Battery: 3.0Ah Lithium-ion EBM1830

• The EBM1830 Li-ion battery forlong life (approx. 1500 batterylife cycles) and lightweight

• The Li-ion battery is equippedwith overdischarge, overheatand overcharge protection

• The Li-ion battery provides a fullcharge evry time thanks to nomemory effect

• Interchangeable with Hitachiconventional Ni-Cd or Ni-MHbatteries

• New multi-voltage ChargerUC18YRL: The UC18YRL iscapable of recharging Li-ion, Ni-Cd and Ni-MH batteries from7.2V to 18V

040SS 5/19/10 3:30 PM Page 40

41

Power Tools

DG4400B

Part No. DescriptionDG6300B 6300 Watt Commercial Generator

Part No. DescriptionDG4400B 4400 Watt Commercial Generator

• DEWALT 18 volt battery start. Batteryand charger come with the generator

• DEWALT 270cc (9hp) OHV engineprovides worksite reliability

• 20% more starting watts thangenerators in its class

• Proper 120v and 240v outlets for jobsiteapplications

• Worksite tested frame with panelprotection bars for increased durability

• Super quiet muffler reduces enginenoise

• Idle control saves fuel and reducesnoise

• DEWALT 18 volt battery start. Batteryand charger come with the generator

• DEWALT 389cc (13hp) OHV engineprovides worksite reliability

• 20% more starting watts than generatorsin its class

• Proper 120v and 240v outlets for jobsiteapplications

• Worksite tested frame with panelprotection bars for increased durability

• Super quiet muffler reduces engine noise• Idle control saves fuel and reduces noise• Low oil shut-off protects engine

GAS GENERATORS

DIAMOND CORE RIGS

COMPRESSORS

• 12-inch bit capacity (up to 36" withspacers and hydraulic motor and power pack)

• Easy quick-disconnect motor mount• Angle drilling capability up to 45"• Longer columns available up to 60"• 4-spoke sliding handle (can be used on

either side)• Available with choice of electric,

hydraulic or air motors

Heavy-Duty 1.1 HP 4 Gallon Electric Hand Carry Compressor

Heavy-Duty 200 PSI 4.5 Gallon Electric WheeledPortable Compressor

• 4.0 CFM delivered @ 90 PSI pumpprovides rapid recovery

• Oil lubricated pump improves durability• Cast iron cylinder enhances pump life• High-flow regulator for increased

performance• 4 gallon twin stack tank design with

proven acceptance in the market• Dual soft start valves assist in cold

weather start upIncludes: DEWALT Compressor Oil

• 200 PSI max pressure provides a user with80% more usable air than the industryleader

• 5.2 SCFM @ 90 PSI allows the compressorto recover quickly after its initial tankcharge is exhausted

• Vertical stand feature allows a user to savespace by transporting or storing thecompressor in a vertical position

• 78 dBA* operational noise level for aquieter work environment (*tested perISO3477)

• 10" pneumatic wheels allow for easytransportation around the jobsite

• Weighs only 35 lbs. (rig-20 lbs,motor-15 lbs.)

• 6" bit capacity (3" handhold)• Converts to hand held drill motor in

seconds• Combination Stand quickly angles to

45 degrees• 3-speed hand hold drill motors with

overload clutches are available withchoice of 110V electric, 220V electric,air or hydraulic power

• Mast can rotate 360 degrees on swivel stand

• Reversible slide handle

M-4 Rig

Part No. DescriptionM-5 RIG The M-5 Rig combines the drilling

precision of the M-2 Pro Rig with the portability of our M-4 Rig

Part No. DescriptionM-4 RIG 3 speed, very powerful and just 35 lbs.

Part No. DescriptionD55146 Heavy-Duty 200 PSI 4.5 Gallon Electric

Wheeled Portable Compressor

Part No. DescriptionD55153 Heavy-Duty 1.1 HP Continuous 4 Gallon

Electric Hand Carry Compressor

DG6300B

M-5 Rig

041SS 5/19/10 3:30 PM Page 41

42

Power Tools

Gas

COMPRESSORS

PRESSURE WASHERS

• Durable 2-stage sealed lube pump providesextended maintenance free operationwithout oil contamination

• Roll cage and control panel provideprotecton to key compressor components

• DEWALT® 389cc, 13 Gross HP OHVengine for commercial performance • DEWALT® 196cc OHV engine for power

and long life• Low oil shutoff valve prevents engine

damage from low oil• CAT triplex pumps deliver professional

performance and life• DEWALT® heavy-duty spray gun with

rotating side handle makes pressurewashing more comfortable

• 50' x 3/8" rubber coated steel braidedhose is extremely durable

• Long life cast iron pump with exclusivelow oil shut off device prevents lock upsdue to lack of lubrication

• Forced air cooling allows the pump to runmore efficiently and produce higherSCFM

• Low profile design allows for easymaneuverability

Part No. DescriptionD55171 Heavy-Duty 1.5 HP Continuous, 175 PSI,

7.5 Gallon Electric Wheeled PortableCompressor

Part No. DescriptionD55672 Heavy-Duty 196cc (6.5 HP) 150 PSI

8 Gallon Gas Wheeled PortableCompressor

Drive Belt driveHorsepower 6.5 HP (196cc)Tank Size 8 galPower Supply DEWALT® OHV engineCFM @ 100 PSI 9.0 CFMPump Speed 925 rpmTool Length 42.27"Tool Height 25.15"

Drive DirectHorsepower 1.6 HPTank Size 7.5 galPower Supply 120V 4 pole

induction motorCFM @ 100 PSI 4.6 CFMPump Speed 1,725 rpmTool Length 33.5"Tool Width 24"

Electric

Part No. DescriptionDPD3000IC Heavy-Duty 3000 PSI Max, 2.8 GPM

DEWALT® Pressure Washer withDEWALT® 196cc engine and CAT pump

Part No. DescriptionDPE3800X Heavy-Duty 3800 Max PSI, 4.0 GPM

Gas Pressure Washer with Battery Start

Electric Electric• 4.0 CFM delivered at 90 PSI pump• Oil lubricated pump improves durability• Cast iron cyliner enhances pump life• 10" pneumatic wheel and handle kit • Top load panel with positioning holes allows

unit to transport loads up to 100 lbs• High-flow regulator • Run multiple tools

Part No. DescriptionD55154 Heavy-Duty 1.1 HP Continuous 4 Gal Electric

Wheeled Dolly-Style Air Compressor with Panel

Horsepower 1.1 Continuous HPDrive Direct Tank Size 4 galPower Supply 120V AC, 15 amps,

60 Hz, 2 pole induction motor CFM @100 PSI 3.8 CFMPump Speed 3,400 rpm

Water Pressure 3800 PSI MaxFlow Rate 4.0 GPM Max Engine Mfgr. DEWALT® 389ccPump Brand CAT 67DXWheels 12" steel wheels with

rubber pneumatic tiresPump/Hose Quick

Connector YesHose 50' x 3/8" steel

braided hoseHose/Gun Quick Connector Yes

• .75 SCFM delivered @ 90 PSI pump, 1.0gallon tank and 135 max PSI

• Durable oil free pump • Low 71 dBA* allows for quieter operation

(*Tested per ISO3744)• Roll cage and control panel • Low 2.6 amp draw motor • Lightweight (24 lbs), thin (9.0")

Part No. DescriptionD55140 Heavy-Duty 1 Gal., 135 PSI Max,

Trim Compressor

Horsepower 0.3 Continuous HPDrive BeltTank Size 1.0 galPower Supply 120V AC, 60 Hz, 10 amps,

universal motor CFM @100 PSI .6 CFMPump Speed 2,200 rpm

042SS 5/19/10 3:31 PM Page 42

43

Power Tools

• Stops dust and debris at the source• Shortens clean-up time• The centerpiece of the Bosch Airsweep™

Dust Extraction System of tools andattachments

• 4 modes of operation for maximumvacuuming versatility

• Activation by power tool• Power Broker™ Dial• Bosch exclusive Pulse-Clean™ electro-

magnetic filter cleaning system

Blower (Variable Speed)

Tile Saw TA10100 Masonry Saw PS1421

ACCESSORIESBosch Dust Bag – VAC013Part No. 3931A

Part No. 1942

Part No. TA10100 Part No. PS1421

Heat Gun1942

• Air intake regulator allows variable temperature adjustment

• Insulated nozzle provides coolexterior temperature

• Padded, adjustable stand

Cutting Capacity• Rip cut up to 18" square tiles or pavers.• Diagonal cut up to 12" tiles.• 10" blade capacity for cutting thicker material.• Depth of cut 3-3/4" thick material.

Single Voltage High Torque Motor• Features a 1-1/2 HP single voltage saw-duty

motor that is totally enclosed fan cooled(T.E.F.C.).

• Motor runs on most 115V outlets.• Motor is high torque for production sawing

capability and is both UL and CSA rated andbacked by the manufacturer’s limited, oneyear warranty.

Features• 14" Blade Guard—5" Depth of Cut• Patented Sta-Level Blade Guard• Patented Quick Mount Cutting Head• Field Installable Blade Shaft Assembly• 3 Motor/1 Engine Options Available• 1-1/2 HP, 2 HP, 3 HP—Electric/5-1/2 HP

Honda—Gas• Removable Carrying Handles—Standard

SpecificationsHorsepower 2Engine/Motor Mfg. Baldor Electric MotorBlade Guard Capacity (inches) 14Maximum Depth of Cut (inches) 5Weight (lbs.) 169Includes Water Pump Yes

Specifications:Rating 120V ACAmperage 14.3Max. Temperature 750° FMax. Air Volume 23 C.F.M.

Features• Variable speed control dial allows maximum

speed to be set between 0–16,000 rpm• Maximum air volume of 99 cfm for great

power in a compact tool• Maximum air velocity of 114 mph• Ergonomic handle allows for comfortable

use in both horizontal and downwardapplications

• Large trigger with conveniently located lock-on button

• Compact and lightweight—only 4.0 lbs.Includes• Long nozzle (134182-7) • Dust bag (122321-1)

SpecificationsMaximum Air Volume 99 cfm Length 18-7/8"Maximum Air Velocity 114 mph Net Weight (lbs.) 4.0AMPS 5.5 Shipping Weight (lbs.) 5.90No Load rpm 0–16,000 UPC Code 088381054379

Features• Cantilevering Rail/Cart system• Only 69 lbs• Stainless steel rail sysem• Integrated 45/22.5° miter feature• Plunge feature• Dual water nozzles• Rear and side water attachments• Removable cutting cart• Compact tile saw frame• 3-3/4" depth of cut• Powerful 1.5 HP motor• 5 gallon water pan• Edge guide

SpecificationsAmps 15.0 Plunge Feature YesBlade Diameter 10" Max. Depth of Cut 3-3/4"Tool Weight 69 lbs Integrated 45° Miter YesMax Rip Capacity 24" Tile Integrated 22.5° Miter YesDiagonal Cut Capacity 18" Tile Length 34"

Airsweep™ 13 GallonWet/Dry Vacuum Cleaner

with Power Broker™

Part No. UB1101

Part No. D24000

10" Wet Tile Saw

Powerful Motor Delivers a Maximum Air Velocity of 114 mph

043SS 5/21/10 9:30 AM Page 43

104

General Construction

Heavy-Duty 18V SelfLeveling Interior Laser Part No. DW079KI• Private mode option eliminates remote

control interference between multiplerotary lasers on the jobsite

• Fully automatic horizontal & vertical selfleveling with out-of-level shutoff elimi-nates user error, ensures accuracy, andreduces set up time

• Multi-voltage adapter accepts allDEWALT® batteries 9.6V–18V

• Protected rotary head & weather-proof design deliver interior &exterior jobsite durability

Includes: 1 hour charger, 18V bat-tery, laser target card, wall mount, wireless (IR) remote control

Self Leveling Level, Plumb, & Square,4 Beam Laser Part No. DW084K• Self-leveling 4 beam laser is accurate to ±1/8" @

70'• One button operation is fast & easy to use• Overmolded housing helps maintain calibration

under jobsite conditions

• Focused laser beam keeps dots small even overlong distances for improved accuracy and visibil-ity

• Locating magnets hold laser tometal track for easy positioning

Includes: kit box

SpecificationsPower Supply 4 AA Alkaline Plumb Up Accuracy ±1/8" @ 70'Level Accuracy ±1/8" @ 70'Indoor Visibility Range 100 ft.Laser Class II (<1mW) @ 635nmDampening Type magnetic

SpecificationsPower Supply 9.6V–18V DEWALT® BatteriesAccuracy per 100 ft. 1/8 inRotation Speed 0, 10, 60, 250, & 800 rpmSelf-Leveling Range ±5 °Indoor Visibility Range 200 (dia) ftRange with Detector

(not included) 2000 (dia) ftLaser Class IIIa (<5mW) @ 635nm

Digital Laser Detector & Clamp Part No. DW0772• Consistent accuracy, near & far, regardless of

beam size• Compatible with all rotary lasers (interior, exte-

rior, visible, & invisible) — Extending the operat-ing range of most lasers to over 1000'

• 100% waterproof design - when it's dropped inconcrete, hose it off!

• Heavy duty clamp for jobsite durability• Durable windows help prevent nail & screw puncture• Front & rear LCD displays for easy viewing• Adjustable volume control: high, low, & mute: 110dBA (high) can be heard on

the noisiest jobsites• Automatic shutoff turns off detector if inactive for 30 minutes to conserve bat-

tery life

Includes: digital laser detector, one 9 volt battery, heavy-duty detector clamp

Laser Plumb Bob Part No. DW082KFeatures• Self-leveling plumb bob is accurate to ±1/8"

@ 50'• One button operation is fast and easy to use• Overmolded housing helps maintain

calibration under jobsite conditions• Focused laser beam keeps dot small

even over long distances for improved accuracy and visibility

• Locating magnets hold laser plumb bob tometal track for easy positioning

• Cross-hair beam pattern helps user findcenter of beam

Includes: kit box

Self Leveling Line Laser(Horizontal & Vertical) Part No. DW087KFeatures:• Accurate to +/– 1/8" @ 30' for level applications• Built-in magnetic pivot bracket mounts easily on

metal surfaces• Overmolded housing for jobsite durability• 1-button operation and control panel for

ease of use

Includes:• 3 (AA) batteries for

20+ hours run-time• Kit box

SpecificationsPower Supply 3 AA batteries Self-Leveling Range 5°Indoor Visibility Range 50 ft.Laser Class II

Construction TripodPart No. DW0736Features• Industry Standard 5/8"x11 mounting

threads, flat head design• Quick-release legs for fast and easy setup• Height 68" opened, 42" closed• Lightweight, durable aluminum construction• Pointed steel feet are stable on any terrain• Built in strap for easy transport

104SS 5/19/10 3:49 PM Page 104

105

Lasers

PLS5 and PLS3

Provide Point-To-Point Alignment InformationSpecifications

Made In USA PLS5 PLS3

• Working range: +/-100' +/-100'• Accuracy: < 1/8" @ 100' < 1/4" @ 100'

(all beams) (< 3 mm @ 30 meters) (< 6 mm @ 30 meters)• Leveling range: +/-8° +/-6°• Power supply: 3 AA batteries 3 AA batteries• Operating time: + 30 hrs. continuous + 30 hrs. continuous• Dimensions: 2-1/2" x 6-1/2" x 4-1/4" 1-1/2" x 4-1/4" x 3-1/8"• Weight: 1.7 lbs (.77 kg) 12 oz. (.33 kg)

PLS5

PLS3

PLS-180Palm Laser With Detector Interior–Exterior

Horizontal–Vertical LayoutThe PL-180 System Includes:• PLS-180 Unit• Wall Bracket• PLS LD Detector• PLS-180 Pouch• Compact Carrying Case• Operating Manual

PLS90ESquare on Slope, Square on Slab.

• Accuracy 1/8 inch @ 100 feet• Range up to 250 feet w/PLS

LD detector (optional)• Self Leveling: Up to 6 degrees• Fine tune adjustments for

precise layout• PLS90E includes universal

base-tripod adapter, floortarget and carrying case

Heavy-Duty 18V Self-Leveling Interior LaserFEATURES:• Private mode option eliminates remote control interference between

multiple rotary lasers on the jobsite• Fully automatic horizontal and vertical self leveling with out-of-level shutoff

eliminates user error, ensures accuracy, and reduces set up time• Multi-voltage adapter accepts all DEWALT® batteries 9.6V–18V• Bright, sharp, high power beam delivers maximum visibility, even over

long distances

SPECIFICATIONS:Power Supply 9.6V–18V DEWALT® BatteriesAccuracy per 100 ft. 1/8 inRotation Speed 0, 10, 60, 250, & 600 rpmSelf-Leveling Range ±5 °Indoor Visibility Range 200 (dia) ftRange with Detector (not included) 2000 (dia) ftLaser Class IIIa (<5mW) @ 635nmTool Weight 6.5 lbsShipping Weight 15 lbs

Part No. DW079KI

INCLUDES:• 1 hour charger• 18V battery• Laser target card• Wall mount

• Wireless (IR) remote control

• Laser enhancement glasses• Heavy-duty kit box

(w/padded interior)

105SS 5/19/10 3:49 PM Page 105

155

Collated Screw Systems

Corded Decking/Flooring Auto-Feed ScrewdriverPart No. D600-AC• High-torque 7-amp motor has more

power than the typical hand-heldscrewgun to drive effortlessly into composite decking andengineered lumber

• Patented feed-system provides continuous operation withfewer jams

• Fully adjustable handle matches height of any operator• Thin profile front-end provides unobstructed line of sight for

precision placement of screws

SCREW FASTENERS

SpecificationsRPM 3300Current 5.2 ampsWeight 8.7 lbsHeight 6-7/8"Length 31-1/2"–41-1/2"Width 4"

14.4V Cordless Auto-Feed ScrewdriverPart No. D404–14V• 2300 RPM High-Torque Motor for tough

applications• Patented Clutch Design-no more stripped out

heads and improved bit life• Adjustable Depth-of-Drive for precision fastening• Includes case, wrenches, two spare bits, two batteries and

one-hour charger

SpecificationsRPM 2300Voltage 14.4VWeight 5.2 lbsHeight 10"Length 13-4/5"Width 2-4/5"

Screw FastenerPart No. DS300-S2• Patented SENCO

DuraSpin feed system drives screws quickly and efficientlywithout jams or misfeeds.

• Ergonomic design

SpecificationsVoltage: 120 volts RPM: 2500 rev/min Height: 9"Length: 20.5"Weight: 7.4 lbFastener Capacity: 50 screws (per strip)Vibration: less than 2.5 m2

18V Cordless Auto-Feed ScrewdriverPart No. D550-18V• Higher voltage and 3000 RPM High-

Torque Motor for heavy-dutyapplications

• Patented Clutch Design-no morestripped out heads and improved bit life

• Adjustable Depth-of-Drive• Includes case, wrenches, two spare bits, two batteries and

one-hour charger

SpecificationsRPM 3000Voltage 18VWeight 6.3 lbsHeight 11"Length 16-4/5"Width 3-4/5"

Bits For Tools and AttachmentsTyRex Item Fits Tools Part No.Phillips Bits—2 per Pack D400-AC, D404-14V BIT201Square Bits—2 per Pack D400-AC, D404-14V BIT211Phillips Bits—2 per Pack DCF5000, TY5100 BIT411Square Bits—2 per Pack DCF5000, TY5100 BIT412Rex Drive Bits—2 per Pack DCF5000, TY5100 BIT601Phillips Bits—2 per Pack D600-AC, D550-18V BIT311

TY5500, TY0310Square Bits—2 per Pack D600-AC, D550-18V BIT302

TY5500, TY0310Rex Drive Bits—2 per Pack D600-AC, D550-18V BIT602

TY5500, TY0310Phillips Bits—2 per Pack D600-2, D600-ATT BIT301Square Bits—2 per Pack D600-2, D600-ATT BIT212Phillips Bits—2 per Pack TY0100, TY0200 BIT502Square Bits—2 per Pack TY0100, TY0200 BIT501Rex Drive Bits—2 per Pack TY0100, TY0200 BIT603Phillips Bits—2 per Pack TY0300 BIT504Square Bits—2 per Pack TY0300 BIT503Rex Drive Bits—2 per Pack TY0300 BIT604

Corded Auto-Feed ScrewdriverPart No. DCF5000• Patented Corner-FitTM feed system

allows for placement of screws incorners and around obstructions

• Patented Clutch Design-no morestripped out heads and improved bit life

• Variable-Speed Trigger and Adjustable Depth-of-Drive forprecision fastening

• One-Hand Bit Release-makes bit change out quick

SpecificationsRPM 0–3300Current 4.3 ampsWeight 4.8 lbsHeight 8"Length 15-3/4"Width 3"

155SS 5/19/10 3:59 PM Page 155

001ss 5/19/10 3:20 pm page 1 power tools · 2016-12-06 · max rpm 0–450/0–1,450/0–1,800 max...

Documents