009-0795-02 ssc-w008 tech spec - savantdealers.savantav.com/portal/savantsandbox/released...
TRANSCRIPT
1 of 6
DescriptionThe SmartControl 8 with Wi-Fi (SSC-W008) is part of the Savant SmartControl family designed to wirelessly provide infrared (IR) and serial control of third party devices.
The SSC-W008 simplifies retrofit installations including multi-dwelling units where wired installations may be physically and cost prohibitive. Moreover, the wireless Wi-Fi network topology eliminates the need to either remodel or rewire a residence or facility at the time of installation.
The SSC-W008 is an intelligent control product that connects with flat panel displays, DVD players, AV receivers, set-top boxes, projectors, lights, thermostats, window treatments, security systems, and other equipment commonly used in home automation and business installations.
The SSC-W008 is a solution for small installations controlling IR-based devices. The SSC-W008 can also be used for cost-effective control expansion—especially when additional IR control ports are required.
The SSC-W008 can be linked to any Savant SmartSystem™ containing a Savant Host—HST-series or SVR-series.
The SSC-W008 supports scanning of the Wi-Fi network for possible network choices and is able to select either the WPA1 or WPA2 security methods
NOTE: The SSC-W008 is not intended to function as a Wireless Access Point (WAP). A commercially available IEEE 802.11 b/g/n compliant WAP is required to communicate to the SSC-W008 device over a Local Area Network (LAN).
Feature Summary• Control Formats - Provides the control
and automation features common in basic installations:
(6) – Infrared (IR) Transmitter ports
(2) – Serial ports (RS-232/RS-422/RS-485)
• Supports Wi-Fi (IEEE 802.11 b/g/n)
• The following can be set: static IP address, subnet address, gateway address, and Service Set Identifier
• Range—up to 200 feet over air—subject to site-specific conditions and individual device capabilities
• Small footprint
• Web interface used for customizing network settings
• Use RacePoint Blueprint™ design tool to configure SSC-W008 in a Savant system
Front View of SSC-W008 (above)
1 of 7
Description
The Smart Control 8 with Wi-Fi (SSC-P008) is part of the Savant
SmartControl family designed to wirelessly provide infrared (IR) and
serial control of third party devices.
The SSC-W008 simplifies retrofit installations including multi-dwelling
units where wired installations may be physically and cost prohibitive.
Moreover, the wireless Wi-Fi network topology eliminates the need to
either remodel or rewire a residence or facility at the time of
installation.
The SSC-W008 is an intelligent control product that connects with
flat panel displays, DVD players, AV receivers, set-top boxes,
projectors, lights, IP cameras, thermostats, window treatments,
security systems, and other equipment commonly used in home
automation and business installations.
SSC-W008 is a solution for small installations controlling IR-based
devices. The SSC-W008 can also be used for cost-effective control
expansion—especially when additional IR control ports are required.
SSC-W008 can be linked to any Savant SmartSystem™ containing a
Savant host, such as an HST-4001, HST-4002, SVR-4100, or
SVR-4100S.
The SSC-W008 supports scanning of the Wi-Fi network for possible
network choices and is able to select either the WPA1 or WPA2
security methods
NOTE: The SSC-W008 is not intended to function as a Wireless
Access Point (WAP). A commercially available IEEE 802.11
b/g/n compliant WAP is required to communicate to the SSC-
W008 device over a Local Area Network (LAN).
Feature Summary• Control Formats - Provides the control
and automation features common in basic installations:
(6) – Infrared (IR) Transmitter ports
(2) – serial ports (RS-232 / RS-485)
• Supports Wi-Fi (IEEE 802.11 b/g/n)
• Ethernet 10/100 base-T port
• The following can be set: static IP address, subnet address, gateway address, and Service Set Identifier
• Small footprint
• Use RacePoint Blueprint™ design tool to
configure and customize SSC-W008
Front View of SSC-W008 (above)
Rear View of SSC-W008 (above)
SmartControl 8 with WiFi: SSC-W008
111212 009-0795-00
Rear View of SSC-W008 (above)
SmartControl 8 with Wi-Fi: SSC-W008
0628 009-0795-02 SSC-W008-00
2 of 6
DimensionsThe next figures show the dimensions of the SSC-W008.
This view shows the dimensions of the antenna in millimeters (mm).
ModFLEX Accessores – 2.4 GHz Dipole Antenna DATASHEET
The information in this document is subject to change without notice. Confirm the data is current by downloading the latest revision from www.lsr.com. 330-0016-R1.1 Copyright © 2009-2010 LS Research, LLC Page 2 of 4
PHYSICAL DIMENSIONS (MM)
SmartControl 8 with Wi-Fi: SSC-W008
0628 009-0795-02 SSC-W008-00
3 of 6
SpecificationsEnvironmentalEnvironmentalEnvironmentalEnvironmental
Temperature 32° to 104° F (0° to 40° C)32° to 104° F (0° to 40° C)32° to 104° F (0° to 40° C)
Humidity 10% to 90% Relative Humidity (non-condensing)10% to 90% Relative Humidity (non-condensing)10% to 90% Relative Humidity (non-condensing)
Cooling 1 cubic foot per minute (CFM) recommended1 cubic foot per minute (CFM) recommended1 cubic foot per minute (CFM) recommended
Maximum BTUs 10 BTUs per hour10 BTUs per hour10 BTUs per hour
Rack Space 1U1U1U
Dimensions and WeightDimensions and WeightDimensions and WeightDimensions and Weight
Height 1.59 in/4.04 cm1.59 in/4.04 cm1.59 in/4.04 cm
Width 4.31 in/10.96 cm4.31 in/10.96 cm4.31 in/10.96 cm
Depth 6.50 in/16.51 cm6.50 in/16.51 cm6.50 in/16.51 cm
Weight 3.00 lb/1.36 kg (shipping weight)3.00 lb/1.36 kg (shipping weight)3.00 lb/1.36 kg (shipping weight)
Power Supply Power Supply Power Supply Power Supply
Input Power 120V AC, 50/60 Hz to 5V DC120V AC, 50/60 Hz to 5V DC120V AC, 50/60 Hz to 5V DC
Nominal Power1.3 watts at 5V DC 1.3 watts at 5V DC 1.3 watts at 5V DC
Nominal Power1.6 watts at 120V AC1.6 watts at 120V AC1.6 watts at 120V AC
Maximum Power2 watts at 5V DC2 watts at 5V DC2 watts at 5V DC
Maximum Power3 watts at 120V AC3 watts at 120V AC3 watts at 120V AC
Compliance Compliance Compliance Compliance
Safety and Emissions
FCC Part 15 | CE Mark | C-Tick
This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.Any changes or modifications of this product, not approved by manufacturerwill void the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s). Operationis subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditionssuivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'encompromettre le fonctionnement.
FCC Part 15 | CE Mark | C-Tick
This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.Any changes or modifications of this product, not approved by manufacturerwill void the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s). Operationis subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditionssuivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'encompromettre le fonctionnement.
FCC Part 15 | CE Mark | C-Tick
This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.Any changes or modifications of this product, not approved by manufacturerwill void the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s). Operationis subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditionssuivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'encompromettre le fonctionnement.
RoHS CompliantCompliantCompliant
Front LEDsFront LEDsFront LEDsFront LEDsThe LED on the front panel is used for diagnostic purposes. A description of the LED is available in the SSC-W008 Quick Reference Guide.The LED on the front panel is used for diagnostic purposes. A description of the LED is available in the SSC-W008 Quick Reference Guide.The LED on the front panel is used for diagnostic purposes. A description of the LED is available in the SSC-W008 Quick Reference Guide.The LED on the front panel is used for diagnostic purposes. A description of the LED is available in the SSC-W008 Quick Reference Guide.
Rear PanelRear PanelRear PanelRear Panel
See Rear Panel Capabilities and Connectors on page 5.See Rear Panel Capabilities and Connectors on page 5.See Rear Panel Capabilities and Connectors on page 5.See Rear Panel Capabilities and Connectors on page 5.
MountingMountingMountingMounting
Mount on a wall or 1U shelf using side mount brackets.Mount on a wall or 1U shelf using side mount brackets.Mount on a wall or 1U shelf using side mount brackets.Mount on a wall or 1U shelf using side mount brackets.
EnclosureEnclosureEnclosureEnclosure
Metal enclosure, matte blackMetal enclosure, matte blackMetal enclosure, matte blackMetal enclosure, matte black
SmartControl 8 with Wi-Fi: SSC-W008
0628 009-0795-02 SSC-W008-00
This table is continued on the next page.
4 of 6
AntennaAntennaAntennaAntenna
DescriptionField replaceable, 2.4-2.5 GHz dipole 2 DBI for reverse polarity SMA (SubMiniature version A) connector
Gain +2 dBi
Impedance 50 ohms
Type Dipole
Polarization Linear Vertical
VSWR ≤2.5:1
Frequency ~2400-2500MHz
Weight 13 grams
Size See drawing on page 2.
Color Black
Included ItemsThe individual components included with the Savant SmartControl 8 (SSC-W008) are outlined in the next table.
Description Quantity
Power Supply - 5V DC 2.5 Amps universal wall unit 1
Antenna with SMA connector 1
6-Pin Screw-Down Connector 2
Screws #6 x 1/4 Phillips Flat 8
Side Mount Bracket 2
Quick Reference Guide 1
Savant Wi-Fi Configuration Utility 1
Required System ComponentsThe system components required for use with the SSC-W008 are outlined in the next table.
Description Model Number
Savant Host HST-XXXX or SVR-XXXX
Ethernet Network Enterprise-grade network deployment
Optional AccessoriesThe optional Savant accessories available for use with the SSC-W008 are outlined in the next table.
Description Model Number
RS-232 Adapters SAK-1000
RJ-45 Serial Adapters Flow Null (10-pack) CON-10FN
RJ-45 Serial Adapters Flow No Null (10-pack) CON-10FNN
DB-9 Mini Gender Changer (10-pack) CON-10GEN
RJ-45 Serial Adapters No Flow Null (10-pack) CON-10NFN
RJ-45 Serial Adapters No Flow No Null (10-pack) CON-10NFNN
Infrared (IR) Emitter IRB-1000
IR Emitters (10 pack) IRB-1010
SmartControl 8 with Wi-Fi: SSC-W008
0628 009-0795-02 SSC-W008-00
5 of 6
Rear Panel Capabilities and ConnectorsThe callouts in the next figure relate to the descriptions provided in the next table.
1
45
2 3
The next table describes the callouts in the previous figure.
Number Item Description
1 Reset Button resets the device to factory default DHCP mode.
2 RS232/485-1RJ-45 port used to transmit and receive serial binary data transmission using RS-232/RS-422/RS-485. Handshaking included for flow control.
3 IR Infrared serial transmitter output ports.
4 RS232/485-2RJ-45 port used to transmit and receive serial binary data transmission using RS-232/RS-422/RS-485. Handshaking included for flow control.
5 5VDC 5V DC input power to the SSC-W008.
SmartControl 8 with Wi-Fi: SSC-W008
0628 009-0795-02 SSC-W008-00
6 of 6
Devices Supported by SSC-W008The next figure shows a rear view of the SSC-W008.
RS-232/RS-485
The next table describes the typical uses associated with the ports on the SSC-W008.
Port Quantity
Port Type Port Icon Typical Uses
2 Serial Lighting, Displays, Door Entry Systems, and Heating Ventilation Air Conditioning (HVAC)
6 InfraredBlu-ray Players, Displays and
Set Top Boxes (Cable and Satellite)
SmartControl 8 with Wi-Fi: SSC-W008
0628 009-0795-02 SSC-W008-00
Copyright © 2013 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.
All brand names, product names and trademarks are the property of their respective owners.
Savant Systems, LLC reserves the right to change product specifications without notice.