01 safety management fall protection lifting cargo...
TRANSCRIPT
Fall ProtectionLiftingCargo ControlSafety Management01
01.1
Harnesses
Universal
US1100
ERGO PLUS
USCLIMA
US1101
Harness Lanyard Combinations
Coated Fall Protection Products
Roofers Kits
US1104
US1120
US1121
USWORKA
Universal Harness w/ Tongue and BucklePart#: USUNI1
US1100 HarnessPart#: US1100
Harnesses
US1101 Harness Part#: US1101
- Lightweight construction
- Rear D ring
- Adjustable shoulders
- Adjustable chest strap
- Adjustable tongue and buckle leg straps
- Meets ANSI Z359.1-2007
- Lightweight construction
- Rear D ring
- Adjustable shoulders
- Adjustable chest strap
- Adjustable pass through buckle leg straps
- Meets ANSI Z359.1-2007
- Lightweight construction
- No-slide rear D ring
- Rescue attachment points
- Adjustable shoulders
- Adjustable chest strap
- Adjustable pass through buckle leg straps
- Breathable mesh panel allows easy donning
- Meets ANSI Z359.1-2007
- Lightweight construction
- No-slide rear D ring
- Rescue attachment points
- Adjustable chest strap
- Adjustable tongue and buckle leg straps
- Breathable mesh panel allows easy donning
- Meets ANSI Z359.1-2007
Universal HarnessPart#: USUNI0
18
Harnesses
US1104 Part#: US1104
US1120 Part#: US1120
US1121 Part#: US1121
USWORKA HarnessPart#: USWORKA
- Lightweight construction
- No-slide rear D ring
- Side D rings
- Rescue attachment points
- Adjustable chest strap
- Adjustable tongue and buckle leg straps
- Breathable mesh panel allows easy donning
- Meets ANSI Z359.1-2007
- Versatile confined space harness
- Front attachment loops
- Gotcha rescue compatible
- No-slide rear D ring
- Rescue attachment points
- Adjustable pass through buckle leg straps
- Breathable mesh panel allows easy donning
- Meets ANSI Z359.1-2007
- Lightweight construction
- No-slide rear D ring
- Side D rings
- Rescue attachment points
- Adjustable chest strap
- Adjustable pass through buckle leg straps
- Breathable mesh panel allows easy donning
- Meets ANSI Z359.1-2007
- Versatile harness
- Adjustable padded shoulders
- Comfort waist belt
- No-slide rear D ring
- Contoured side D rings
- Removable tool belt
- Adjustable tongue and buckle leg straps
- Breathable mesh panel allows easy donning
- Meets ANSI Z359.1-2007
19
Harnesses
USCLIMA Lite HarnessPart#: USCLIMA-L
USCLIMA Tech HarnessPart#: USCLIMA-T
USCLIMA Pro HarnessPart#: USCLIMA-P
ERGO Plus 1600 HarnessPart#: US1600
- Versatile harness
- Suspension trauma relief straps
- Rear D attachment
- Upper front attachment point
- Side D rings
- Padded shoulder, back and leg straps
- Quick connect buckles
- Padded saddle
- Saddle velcros out of way for storage
- Meets ANSI Z359.1-2007
- Versatile harness
- Quick connect buckles
- Rear D attachment
- Side D rings
- Padded waist belt with tool loops
- Padded shoulder, back and leg straps
- Velcro lanyard parking points
- Meets ANSI Z359.1-2007
- Versatile harness
- Quick connect buckles
- Lightweight
- Rear D attachment
- Padded shoulder, back and leg straps
- Velcro lanyard parking points
- Meets ANSI Z359.1-2007
- Versatile rigging harness
- Rear D attachment
- Upper and lower front attachment point
- Side D rings
- Padded shoulder, back and leg straps
- Quick connect buckles
- Padded barrel legs
- Great rope access harness
- Meets ANSI Z359.1-2007
20
Aerial Lift KitPart No. USUNI0AB
Universal Lanyard ComboPart No. USUNI0B
Universal Twin Lanyard ComboPart No. USUNI1D
- ANSI compliant harness and lanyard
- Lightweight construction
- Fitted with 6’ lanyard with 2 1/4”rebar hook
- Rear D ring
- Adjustable shoulders
- Adjustable chest strap
- Adjustable pass through buckle leg straps
Harness Lanyard Combinations
- ANSI compliant harness and lanyard
- Lightweight construction
- Fitted with 6’ lanyard with 3/4” safety hook
- Rear D ring
- Adjustable shoulders
- Adjustable chest strap
- Adjustable pass through buckle leg straps
- Reusable tote bag
- ANSI compliant harness and lanyard
- Lightweight construction
- Fitted with twin 6’ lanyards with 2 1/4” rebar hooks
- Rear D ring
- Adjustable shoulders
- Adjustable chest strap
- Adjustable tongue and buckle leg straps
22
Coated Fall Protection Products
Coated Twin Leg Fall Arrest Lanyard with Rebar HooksPart#: USLF62RC
- PVC coated 6FT twin leg tie back fall arrest lanyard with safety hooks and rebar hooks
- Coated steel hardware for corrosion resistance
- 2 1/4” Rebar hooks
- Twin legs for 100% tie-off
- PVC coated 6 FT twin leg tie back fall arrest lanyard with safety hooks
- Coated steel hardware for corrosion resistance
- Tie-back feature for anchorage flexibility
- 3/4” double locking snap hooks
- Twin legs for 100% tie-off
Coated Twin Leg Fall Arrest Lanyard with Safety HooksPart#: USLF66HC
Coated Full Body HarnessPart#: US1901
- PVC coated full body harness
- No-slide rear D ring
- Rescue attachment points
- Adjustable chest strap
- Adjustable tongue and buckle leg straps
- ANSI Compliant
Coated Cross Arm Strap Part#: USCASPVC
- PVC ”choker” style cross arm strap
- Can be used for a variety of applications
- Available in sizes 4’, 6’, and 8’.
- Pass through design allows quick and easy attach-ment
- Coated steel hardware for corrosion resistance
- PVC coating for abrasion resistance
- PVC coating adds longer life
23
Basic Roofer’s Kit Part No. USRFB1
- Lightweight USUNI0 Harness
- 50’ poly-dac vertical lifeline
- 3’ shock absorbing lanyard with 3/4” double locking snap hook
- Steel alloy rope grab
- Reusable hinged roof anchor
- Packaged in a 5 gallon bucket for convenient storage
- ANSI Compliant
- Lightweight U1101 harness
- 50’ poly-dac vertical lifeline
- 3’ shock absorbing lanyard with 3/4” double locking snap hook
- Steel alloy rope grab
- Reusable hinged roof anchor
- Packaged in a 5 gallon bucket for convenient storage
- ANSI Compliant
- Lightweight US1104 harness
- 50’ poly-dac vertical lifeline
- 3’ shock absorbing lanyard with 3/4” double locking snap hook
- Steel alloy rope grab
- Reusable hinged roof anchor
- Packaged in a 5 gallon bucket for convenient storage
- ANSI Compliant
Roofer’s Kits
24
Construction Pro Roofer’s KitPart No. USRFB1-1101
Positioning Pro Roofer’s Kit Part No. USRFB-1-1104
01.2
Lanyards
Twin Leg Tie-Back Fall Arrest Lanyard with Safety HooksPart#: USLF66H
Fall Arrest Lanyard with Rope GrabPart#: US3050RG3
Twin Leg Fall Arrest Lanyard with Rebar HooksPart#: USLF62R
Adjustable Twin Leg Fall Arrest Lanyard with Rebar HooksPart#: USLF68R
- 6’ Twin leg tie back fall arrest lanyard with safety hooks
- 8500 lb abrasion resistant webbing
- Coated steel hardware for corrosion resistance
- Tie-back feature for anchorage flexibility
- 3/4” double locking snap hooks
- Twin legs for 100% tie-off
- Meets ANSI Z359.13-2009
- 3’ Fall Arrest Lanyard with rope grab
- 8500 lb abrasion resistant webbing
- 3/4” double locking snap hook
- Coated steel hardware for corrosion resistance
- Fixed 5/8” rope grab
- Meets ANSI Z359.13-2009
- 6’ Twin leg tie back fall arrest lanyard with rebar hooks
- 8500 lb abrasion resistant webbing
- Coated steel hardware for corrosion resistance
- 2 1/4” Rebar hooks
- 3/4” double locking snap hook
- Twin legs for 100% tie-off
- Meets ANSI Z359.13-2009
- 6’ Adjustable twin leg tie back fall arrest lanyard with rebar hooks
- 8500 lb abrasion resistant webbing
- Coated steel hardware for corrosion resistance
- 2 1/4” Rebar hooks
- 3/4” double locking snap hook
- Twin legs for 100% tie-off
- Meets ANSI Z359.13-2009
28
Lanyards
Stretchy Fall Arrest Lanyard with Safety Hooks Part#: USLF63H
Fall Arrest Lanyard with Safety HooksPart#: USLF61H
Twin Leg Fall Arrest Lanyard with Safety HooksPart#: USLF62H
Stretchy Twin Leg Fall Arrest Lanyard with Rebar HooksPart#: USLF64R
- 6’ Twin leg fall arrest lanyard with safety hooks
- 8500 lb abrasion resistant webbing
- Coated steel hardware for corrosion resistance
- 3/4” double locking snap hooks
- Twin legs for 100% tie-off
- Meets ANSI Z359.13-2009
- 6’ Twin leg energy absorbing stretchy lanyard with rebar hooks
- Coated steel hardware for corrosion resistance
- Bungee material reduces tripping hazard
- 2 1/4” Rebar hooks creates more anchorage options
- 3/4” double locking snap hook
- Twin legs for 100% tie-off
- Meets ANSI Z359.13-2009
- 6’ Energy absorbing stretchy lanyard with safety hooks
- Coated steel hardware for corrosion resistance
- 3/4” double locking snap hooks
- Bungee material reduces tripping hazard
- Meets ANSI Z359.13-2009
- 6’ fall arrest lanyard with safety hooks
- 8500 lb abrasion resistant webbing
- Coated steel hardware for corrosion resistance
- 3/4” double locking snap hooks
- Meets ANSI Z359.13-2009
29
Work Positioning
Rope Lanyard Part#: USWPL
Travel Restraint Line Part#: USSSLA
Clima Adjustable Work Positioning Lanyard
Part#: USCWPL
- Adjustable from 1’ to 6’ rope lanyard
- Fixed rope grab allows quick adjustments
- Protective sheath for wear resistance and longer life
- Can be used for lateral or vertical work positioning
- Captive pin carabiners
- Meets ANSI Z359.3-2007
- Adjustable from 1’ to 9’ rope lanyard
- Fixed rope grab allows quick adjustments
- Easy one hand adjustment system for precise work positioning
- Lightweight aluminum hardware
- Can be used for lateral or vertical work positioning
- Meets ANSI Z359.3-2007
- Adjustable from 1’ 6” to 32’ Travel Resistant Line for work positioning
- Fixed rope grab allows quick adjustments
- Excellent for flat and low pitched roofs
- Allows access where standard lanyards are too short
- Captive pin carabiners
- Meets ANSI Z359.3-2007
- Adjustable from 3’ 6” to 6’ work positioning lanyard with simple slide adjustment
- 8500 lb abrasion resistant webbing
- For versatile work positioning
- Captive pin carabiners
- Meets ANSI Z359.3-2007
Restraint Lanyard Part#: USARL
30
Carabiner Part#: USN256-2
Aluminum CarabinerPart#: US9313-2K
Lanyard Fittings
SpanSet lanyards can be fitted with your choice of metal or aluminum components.
- Alloy steel carabiner
- Twist lock self locking gate
- Minimum breaking strength 5000 lbs (23kN)
- Gate strength 3600 lbs (16 kN)
- Gate opening 22.5 mm
- Weight 10.1 oz
- Meets or exceeds ANSI Z359.12-2009
- Forged aluminum alloy carabiner
- Twist lock self locking gate
- Minimum breaking strength 6294 lbs (28kN)
- Gate strength 1800 lbs (8 kN)
- Gate opening 22.5 mm
- Weight 3 oz
- SAE 7075 anodized alumi-num
- Meets or exceeds ANSI Z359.1-1999
- Forged steel snaphook
- Double action safety hook
- Minimum breaking strength 5000 lbs (23kN)
- Gate strength 3600 lbs (16kN)
- Gate opening 3/4"
- Weight 13.7 oz
- Meets or exceeds ANSI Z359.12-2009
- Forged steel rebar hook
- Double action safety hook
- Minimum breaking strength 5000 lbs (23kN)
- Gate strength 3600 lbs (16kN)
- Gate opening 65mm 2 1/4"
- Weight 27.8 oz
- Meets or exceeds ANSI Z359.12-2009
- Forged aluminum snap hook
- Double action safety hook
- Minimum breaking strength 6070 lbs (27kN)
- Gate opening 19 mm
- Weight 5.7 oz
- SAE 7075 anodized alumi-num
- Meets or exceeds ANSI Z359.1-1999
Snap HookPart#: USN3052
Steel Rebar HookPart#: USN320
Aluminum Snap HookPart#: US8002 BLU
31
01.3
USERL Self Retracting Lifeline
USMSR Self Retracting Lifeline Series
USCRW Self Retracting Lifeline Series
USCSRC Self Retracting Lifeline Series
Mechanical Fall Arrest
- 11’ Web self retracting lifeline with 3/4” double action snap hook
- Solid aluminum housing
- Also available with swivel hook with fall indicator, or your choice of available carabiner or snap hook
- Ideal for use in areas with low clearance heights
- Simple internal mechanisms for easy servicing
- Meets or exceeds ANSI requirements
Mechanical FallArrest Equipment
20’ Self-Retracting Lifeline Part#:USMSR20H
- 8’ Web self retracting lifeline with safety hooks
- 2” Polyester webbing with 6000 lb tensile strength
- 3/4” Double action snap hook
- Also available with swivel hook with fall indicator, or your choice of available carabiner or snap hook
- Meets or exceeds ANSI requirements
8’ Self-Retracting LifelinePart#: USERL-S
11’ Self-Retracting Lifeline Part#: USMSR11H
- 20’ Web self retracting lifeline with 3/4” double action snap hook
- Solid aluminum housing
- Also available with swivel hook with fall indicator or your choice of available carabiner or snap hook
- Simple internal mechanisms for easy servicing
- Meets or exceeds ANSI requirements
11’ Self-Retracting Lifeline Part#: USMSR11S
- 11’ Web self retracting lifeline with swivel hook with fall indicator
- Solid aluminum housing
- Also available with 3/4” double action snap hook or your choice of available carabiner or snap hook
- Ideal for use in areas with low clearance heights
- Simple internal mechanisms for easy servicing
- Meets or exceeds ANSI requirements
34
30’ Self-Retracting LifelinePart#: USCSRC30S
Twin Retracting LifelinePart#:USCRW11S-T
11’ Self-Retracting LifelinePart#:USCSRW11S
Mechanical FallArrest Equipment
- 11’ Web self retracting lifeline with external energy absorber
- Maximum user weight 310 lbs.
- Compact, lightweight and durable
- Acceleration activated brakes
- Fitted with swivel hook with fall indicator snap hook
- Meets or exceeds ANSI Z359.1-2007 and OSHA regulations
- 11’ Web twin composite self retracting lifeline with exter-nal energy absorber
- Maximum user weight 310 lbs.
- Allows 100 % tie-off
- Fitted with swivel hook with fall indicator snap hooks
- Protective cover is available
- Meets or exceeds ANSI Z359.1-2007 and OSHA regulations
- 30’ Galvanized wire rope self retracting lifeline
- Maximum user weight 310 lbs.
- Fitted with swivel hook with fall indicator
- Meets or exceeds ANSI Z359.1-2007 and OSHA regulations
40’ Self-Retracting LifelinePart#: USCSRC40S
- 40’ Galvanized wire rope self retracting lifeline
- Maximum user weight 310 lbs.
- Fitted with swivel hook with fall indicator
- Meets or exceeds ANSI Z359.1-2007 and OSHA regulations
35
01.4
Rescue / Evacuation and Rope Access
ALF Rescue System
Industrial Rope Access Kit
Hand Ascenders
Daisy Chain
Gotcha Kit
Gotcha CRD
Gotcha Shark
Gotcha Fire and Rescue
Rescue andEvacuation
Gotcha Kit Part#: USGOTCHA-KIT
Gotcha CRD Kit Part#: USGOTCHACRD
- Rescue from Fall Arrest Lanyards and Fall Arrest blocks
- The casualty is raised to release from their original attachment
- The user can raise or lower the casualty with this kit
- The casualty can be attached from a point of safety
- SpanSet’s most popular and versatile rescue system
- Color coded for simplicity
- Adjustable pole for a remote connection
- Pre-assembled - ready to use right out of bag
- Constant rate lowering and minimal user input
- The casualty can be raised to release their original attachment
- The casualty can be lowered to safety
- Descent is set to a constant controlled rate
- The rescuer can access the casualty for recovery
- A single person can descend to safety
- Pre-assembled - ready to use right out of bag
*SpanSet Inc. offers training specifically tailored
to the use of all SpanSet rescue kits.
Use of these kits should not be undertaken wi-
thout SpanSet Inc. approved training.
Emergency Response Why SpanSet can help you find a solution If you have selected a method of working that could result in a worker being suspended in a harness, for example fall arrest, or work positioning techniques, then you must consider the rescue implications.
Rescue for personnel suspended at height is an issue that needs addressing for workers, whether they are at 10 FT or 700 FT. Traditionally a great deal of emphasis has been placed on this area by those working in extreme environments. It also applies to areas that appear more straightforward, but in these areas it is seldom addressed.
Unconsciousness or death can occur to a suspended casualty even though they may not be injured after their initial fall. This is due to a decrease in the effective circulation of oxygenated blood around the body caused by a combination of factors, such as body position and a lack of muscle pumping of venous blood. If the worker is able to move or relieve the pressure points, then the side effects can be dramatically reduced.
However, in the case of an unconscious worker the side effects continue unchecked and rescue is the only option. The time it takes for this condition to affect a person can vary greatly, so speedy resolution is essential.
There are several approaches to rescue provisions 1st Response Rescue and Emergency Services, each having its own merits and disadvantages. The rescue equipment can also take many different forms all with different levels of risk, training requirements, aptitude and commitment. It is therefore important to identify the solution that is right for your application. In order to do this you must consider all the variables such as the equipment they are using, where they are using it and the capability of the users.
The Gotcha Rescue Range has been de-signed to provide simple, pre-assembled solutions for a variety of applications.
Industry Sectors that requireRescue and Evacuation
Telecommunications
Scaffolding
Roof Work
Elevated Work
Platforms
Tower Crane Access
Wind Energy
Rope Access
Electrical
Oil Platform
Steel Work
38
- Rescue from fall arrest lanyards, vertical fall arrest sys-tems and webbing fall
- Bladeless cutting –unique garrote cutter, means no knives
- The SHARK is a descent rescue kit
- Two person use– rated for loads up to 660 lbs in normal use
- Maximum working length: 195” and 325” versions
- Pre-assembled - ready to use right out of bag
- Rescue from vertical and horizontal situations where a flexible line system is required
- Victims can be recovered without the need for knives due to the raising and lowering capabilities
- Single person use:
- A single kit is capable of lowering or raising a single victim
- The GOTHCHAFR-KIT is available in 195” and 325” ver-sions
- Pre-assembled - ready to use right out of bag
Gotcha Fire and Rescue KitPart#: USGOTCHAFR-KIT
Gotcha Shark KitPart#: USGOTCHASHARK
Gotcha Suspension Loop USGOTCHA-SL
Gotcha Grabba Accessory USGRABBA
- Suspension loop can be deployed by rescuer for the victim to stand in while waiting on rescue
- Helps to relieve some of the effects of suspension and extend the period of time for rescue
- Easy to use
- For emergency use
- Device enables the rescue of a victim from any length of wire rope devices
- Robust high quality grab
- Simple fit
- Easy to clean
- Can be used on wire rope retractable fall arrest devices
Rescue and Evacuation
*SpanSet Inc. offers training specifically tailored
to the use of all SpanSet rescue kits.
Use of these kits should not be undertaken wi-
thout SpanSet Inc. approved training.
39
ALF Rescue System Part#: USRALF120
Rescue and Rope Access
- The Rescue ALF is the latest innovation as a rescue system for both confined space and fall arrest
- R-ALF pulley has an over-speed auto locking brake when a fall occurs
- R-ALF pulley used in combination with double pulleys creates a 5;1 mechanical advantage for easier lifting
- Standard kit comes with 120’ of rope allowing a 25’ lift.
- Durable and corrosion resistant anodised aluminum.
- Aluminum carabiners
Industrial Rope Access KitPart#: USIRAK
- Ideal kit for accessing difficult or remote areas
- Includes: the USCLIMA-PRO rigging harness
- Descender
- Hand ascender
- Kernmantle rope lines with carabiners
- Mobile locking ASAP fall arrester with shock absorber
- Chest rope clamp for ascending a rope
- Angled attachment for lie flat comfort
- The USIRAK can be tailor made to fit customers needs
- Meets or exceeds IRATA and SPRAT regulations
Hand AscenderPart#: USLHA
Part#: USRHA
- Easy to use
- Molded grip shape that prevents your hand from slipping
- Color coded for easy identification (green-left / red-right)
- Ergonomic trigger allows one-handed installation and removal
- A safe alternative to expensive engineered solutions
- Rope friendly progress capture cam
- Dual attachment capacity
- High strength aluminum alloy extrusion solutions
Daisy ChainPart#: USDC6
- Clip off to an anchor quickly and easily
- Can be clipped into an anchor at any of the sewn loops for secure attachment
- Easily clipped with any locking carabiner (sold separately)
- 13 mm Dyneema webbing minimizes weight and bulk
- Minimum breaking strength 5000 lbs
- ANSI Z359.4-2007
41
01.5
Anchorages
Beam Anchor
Cross Arm Straps
Cross Arm Slings
Swivel Anchors
USwrappa
Anchorage Slings
Roof Truss Anchor
Horizontal Safety
Safeline
Anchorages
Cross Arm Strap Part#: USCAS
Heavy Duty Cross Arm Strap Part#: USCASHD
PVC Coated Cross Arm Strap Part#: USCASPVC
Cheater Anchor Sling Part#: USCCA6
- ”Choker” style cross arm strap
- Can be used for a variety of applications
- Available in sizes 4’, 6’, and 8’.
- Pass through design allows quick and easy attachment
- Polyester webbing with 12,000 lb tensile strength
- Coated steel hardware for corrosion resistance
- Meets ANSI Z359.1 / Z359.4-2007
- Heavy-duty ”choker” style cross arm strap
- Can be used for a variety of applications
- Available in sizes 4’, 6’, and 8’.
- Pass through design allows quick and easy attachment
- Coated steel hardware for corrosion resistance
- Wear pad for abrasion resistance
- Meets ANSI Z359.1 / Z359.4-2007
- PVC ”choker” style cross arm strap
- Can be used for a variety of applications
- Available in sizes 4’, 6’, and 8’.
- Pass through design allows quick and easy attachment
- Coated steel hardware for corrosion resistance
- PVC coating for abrasion resistance
- PVC coating adds longer life
- Meets ANSI Z359.1 / Z359.4-2007
- 6’ Cable anchorage connector
- 1/4” Vinyl-coated galvanized aircraft cable
- Coated steel hardware for corrosion resistance
- 3/4” Snap hook and pass through O-ring
- Can be used for a variety of applications
- Abrasion resistant
- Meets ANSI Z359.1 / Z359.4-2007
Concrete Anchor Strap Part#: USTAS
- 4’ temporary concrete anchor strap
- Can be used for a variety of applications
- Pass through design allows quick and easy attach-ment
- Coated steel hardware for corrosion resistance
- Meets ANSI Z359.1 / Z359.4-2007
44
Concrete Anchor SwivelPart#: USSWY100C
Anchor SwivelPart#: USSWH100Y
Steel Anchor SwivelPart#: USSWY100S
Anchorages
Pull Lock Anchor Part#: USPULL-LOCK
- 10K Swivel anchor with 1” hole
- Allows D-ring to rotate 360 degrees
- Key lock design keeps the D-ring seated preventing spreading outward during heavy loads
- Can be used for both steel and concrete applications
- 10K Swivel anchor with concrete bolt
- Allows D-ring to rotate 360 degrees
- D-ring can flip back and forth at 180 degrees
- Key lock design keeps the D-ring seated preventing spreading outward during heavy loads
- Can be used for both steel and concrete applications
- Anchor Swivel 10K steel anchor w/ 5/8”x4” G8 steel bolt lockwasher and locknut
- Allows D-ring to rotate 360 degrees
- D-ring can flip back and forth at 180 degrees
- Key lock design keeps the D-ring seated preventing spreading outward during heavy loads
- Can be used for both steel and concrete applications
- Easy to use- simple installation and removal
- Multi-directional attributes- work in horizontal, vertical and overhead surfaces
- Reusability- when the job is done, simply fill in the drilled hole if necessary and reuse at your new desired location
- Provides a quality anchor where otherwise unavailable
- For concrete applications
Anchorage ConnectorPart#: USBEAMER
- The USBEAMER anchor was designed for foot level as well as overhead use.
- The USBEAMER steel beam anchor is reusable, weather resistant, and durable to handle all kinds of abuse.
- This anchor is extremely lightweight, only requires a single hand for operation.
- Meets all applicable standards for fall arrest
45
- Provides a qualified anchor on eve of rooftop where none is available
- Durable design
- Easy to install
- A safe alternative to expensive engineered solutions
- Meets ANSI Z359.1 / Z359.4-2007
Anchorages
Anchorage Connector Part#: USWRAPPA
Steeltex Anchorage Sling Part#: USST60
Anchorage Sling Part#: USATSL
Roof Truss Anchor Part#: USSA01
- Temporary anchorage slings
- Provides a qualified anchor point on standard scaffold tube.
- Color coded to ensure correct installation and use
- Continuous polyester sling surrounded with a protective tubular sleeve
- MBS 70kN
- Meets ANSI Z359.1 / Z359.4 -2007
- Provides a good point of attachment on a structure
- Continuous steel cable sling
- Protective tubular sleeve
- Examination window for regular inspection
- Available in sizes 3’,6’, and 9’
- Meets ANSI Z359.1 / Z359.4 -2007
- Provides a point of attachment on a structure
- Continuous polyester sling
- Protective tubular sleeve
- Available in sizes 3’, 4’,6’, and 9’
- Meets ANSI Z359.1 / Z359.4 -2007
46
Horizontal Safety LinePart No. USHSL-LL
Horizontal Safety LinePart No. USHSL-LLBK
Tension Force Indicator
Now you can easily determine the amount of pre-tension you have introduced when tensioning the HSL with the innovative and patented tension force indicator available only at SpanSet!
Our tension force indicator helps prevent over tensioning of the system and ensures the correct tension is applied every time it is used.
Anchorages
Horizontal Safety Lines
Hozizontal Safety Line
Our Horizontal Life Line is easy to install and tighten with the built in rachet system. For fall restraint pur-poses the horizontal safety line can be used in conjunction with the fixed length or adjustable restraint and fall arrest lanyards. It can also be used as an anchorage for use with the SpanSet Travel Restraint Line.
For fall arrest use it can be used with all SpanSet Inc lanyards.
If you are in any doubt as to the compatibility of use with other manufacturers lanyards please contact SpanSet Inc.
Our horizontal safety line is tested for two person use, but SpanSet Inc, advises that this type of system should be used by only one person.
The assembly is provided in a compact, sturdy nylon bag complete with a shoulder strap for easy mobil-ity.
For safety a wear indicator line is incorporated into the webbing edge. If it becomes visible the safety line must be removed from service.
- Webbing loops at each end for attachment
- Built in wear indicator
- Tension force indicator
47
SAFELINE Horizontal Life Lines
What is a Safeline Fixed Safety System
When height safety hazards require a solution beyond the scope of basic harness, lanyard, and anchor solutions a fixed engineered system may be your answer. The Safeline horizontal safety system is a ten-sioned wire line incorporating a mobile travel-line anchorage point, “the Catcher” for the user to attach to.
The Safeline system can be mounted to a wide range of structures or materials in a variety of configura-tions to create customized solutions for workers at height. The unique features of the Safeline system allows the user to remain attached while traveling across the entire length of the system. Safeline Horizontal safety systems can be designed so that their location provides increased security for the user. Systems can be engineered to prevent falls from occurring by keeping the worker from the fall hazard (Work Restraint) or for fall arrest reducing the arresting loads on both the worker and structure.
Safeline is installed through a network of approved and highly trained height safety professionals with experience in different industrial sectors. The combination of Safelines technical expertise and an installer network with experience in the local market or industry sector enables us to provide solutions tailored to the user’s needs.
Safeline
- Suitable for all roof types including composite, standing-seam and mem-brane roofs
- No compromise of roof integrity
- Computer calculation package guarantees all installations are within the safe working limits of the Safeline system
- All components manufactured from grades 304 and 316 stainless steel
- 8mm stainless steel wire rope
- Serial numbered for traceability
- Full technical support available
- Periodic retesting of installations
- Can be installed on inclines up to 15 degrees
- SpanSet training courses available
Key Features
SpanSet Inc. offers training specifically tailored to the SafeLine System. Installation of the SafeLine System should not be under-taken without SpanSet Inc. approved training.
49
01.6
Accessories
Harness Accessories
Work Positioning Accessories
Rescue Accessories
Work Positioning BeltPart#: USEXCELBELT
- Easily fitted to SpanSet harnesses
- Side D rings for work positioning
- Equipment loops for gear stowage
- Fully adjustable
- Available in M/L, XL, and XXL
Lanyard Parking Point Part#: USPARKP
Suspension LoopsPart#: USSL
Fall Arrest Lanyard ExtenderPart#: USEXTN
- Offers relief to suspended victim after a fall
- Easy to use
- Can be attached to any harness
- Two zip-open pouches
- Loop & velcro attachment
- Sacrificial attachment point for “parking” a lanyard when not in use.
- Easy break away / attachment
- Personalized placement
- Retro fit to SpanSet Inc. harness range
- 18” lanyard extension with snap hook and D ring
- Attached to the harness before use
- Ideal for workers who cannot easily reach the dorsal D ring on their harness
- Extends lanyard length for high overhead attachment points
- 3/4” Double action snap hook with 3600 lb ANSI approved gate
HarnessAccessories
52
- Stainless steel (polished)
- For rope 16mm (5/8”)
- Minimum breaking load 2800 lbs
- Meets ANSI Z359.1-2007
Removable Rope GrabPart#: USPUMAP
Removable Rope GrabPart#: USWG58
Rebar Chain AssemblyPart#: UST8221
- Easy to use
- Ideal for work positioning or bracing work
- Features a 25 1/2” rebar hook
- Features two 3/4” snap hooks that can be attached to a harness’ side positioning D-rings
- Capacity rating of 3600 lbs
- Meets ANSI Z359.1-2007
- Removable aluminum rope grab
- 12-16 mm rope grab
- Auto lock/ self trailing
- Smooth action/ easy adjustment
- 5400 minimum breaking strength
- Meets ANSI Z359.1-2007
Work PositioningAccessories
Bosun’s Chair Part#: USBC
- Allows operator to remain seated while being raised or lowered
- Allows user to work hands free in confined spaces
- Keeps user in vertical seated position
53
Spreader Bar Part#: USSPBAR
- Allows operator to be lowered vertically
- Can be used for work and rescue/recovery operations
- Complete with support straps for unconscious victims
Etrier Rope LadderPart#: USARE20
- 20’ ladder with ascending web stirrups sewn together
- Useful for stretcher tendering and other vertical activities
- 17 foot loops are reinforced for easier foot placement and abrasion resistance
RescueAccessories
54
Gotcha Suspension Loop USGOTCHA-SL
Gotcha Grabba Accessory USGRABBA
- Suspension loop can be deployed by rescuer for the victim to stand in while waiting on rescue
- Helps to relieve some of the effects of suspension and extend the period of time for rescue
- Easy to use
- For emergency use
- Device enables the rescue of a victim from any length of wire rope devices
- Robust high quality grab
- Simple fit
- Easy to clean
- Can be used on wire rope retractable fall arrest devices
Other Products
Other Products
Lifting
Cargo Control
SpanSet has been an industry leader in lifting and cargo control products for over 30 years. SpanSet's quality control, with ISO 9001:2008 certified registra-tion, and testing capabilities ensure that a quality product is produced with safety in mind.
58