0101-common domain operation guide
TRANSCRIPT
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 1/37
iManager U2000
Acceptance Test Guide Contents
Contents
Common Domain Operation Guide (Basic Package)............................1
T01 Topology Management.....................................................................................................................................1
T01-01 Topology Operations.............................................................................................................................1
T01-02 Topology Alarms...................................................................................................................................5
T02 Fault Management............................................................................................................................................
T02-01 Alarm !ro"sing....................................................................................................................................
T02-02 Alarm #ettings......................................................................................................................................$
T02-0% Alarm or &'ent (ump.........................................................................................................................12
T0% )n'entory Management..................................................................................................................................1%
T0%-01 *+ysical )n'entory..............................................................................................................................1%
T0, M# #ecurity Management...........................................................................................................................22
T0,-01 #ecurity Management.........................................................................................................................22
T0,-02 Client Access Control................................................................................................................ .........2
T05 M# /og Management................................................................................................................................ ..2$
T05-01 M# Operation /ogs..........................................................................................................................2$
T05-02 /og #torage.........................................................................................................................................2$
T0 (ataase !acup Management......................................................................................................................%0
T0-01 (ataase !acup................................................................................................................................%0
T0 M# /icense Management............................................................................................................................%1
T0-01 M# /icense......................................................................................................................................%1
T0 #ystem Monitoring and Management............................................................................................................%1
T0-01 #ystem Monitoring.............................................................................................................................%1
T0-02 #ystem Management...........................................................................................................................%,
T0-0% Con3iguration File Management.........................................................................................................%,
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
i
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 2/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
Common Domain Operation Guide
(Basic Package)
T 1Topology Management
T-1.1 Topology Operations
T-1.1.1 Expanding and Collapsing a Topological Object
O!ecti"e To test t+e 3unctions o3 e9panding and collapsing a topological o:ect.
Test
#et$orkingDiagram
one
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are sunets and &s in t+e topology 'ie".
TestProcedure
=ig+t-clic in a lan area o3 t+e topology 'ie" and c+oose Expand All 3rom t+e
s+ortcut menu.
=ig+t-clic in a lan area o3 t+e topology 'ie" and c+oose Collapse All 3rom t+e
s+ortcut menu.
&'pectedesults
All t+e & icons are success3ully displayed in t+e Main Topology8 and t+e sunet iconsare not displayed.
For t+e & t+at elongs to a sunet 4e9cluding t+e root sunet8 only t+e sunet icon is
displayed in t+e Main Topology. For t+e & t+at only elongs to t+e root sunet8 t+e &
icon is displayed in t+e Main Topology.
emarks >A
nternal#umer
T01-0101
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
1
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 3/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T-1.1.2 Viewing the Connection Information
O!ecti"e To test t+e 3unction o3 'ie"ing t+e connection in3ormation in t+e topology 'ie".
Test
#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are connections in t+e topology 'ie".
TestProcedure
)n t+e topology 'ie"8 clic in t+e middle o3 a connection et"een t"o &s "+ere
t"o or more connections e9ist. Alternati'ely8 rig+t-clic t+e connection and c+oose
Expand Links 3rom t+e s+ortcut menu. T+en t+e connection is e9panded. To collapse a
connection8 clic in t+e middle o3 any connection et"een t"o &s? alternati'ely8rig+t-clic t+e connection and c+oose Collapse Links 3rom t+e s+ortcut menu.
)n t+e topology 'ie"8 mo'e t+e cursor to a connection. T+e connection name is
displayed in t+e tooltip. Alternati'ely8 rig+t-clic t+e connection and c+oose Properties
3rom t+e s+ortcut menu.
&'pectedesults
@+en you c+oose Expand8 t+e collapsed connection is success3ully e9panded. @+en
you c+oose Collapse8 t+e e9panded connection is success3ully collapsed.
T+e connection attriutes are correctly displayed.
emarks >A
nternal
#umer
T01-0102
T-1.1. Viewing the !ttrib"tes of a Topological Object
O!ecti"e To test t+e 3unction o3 'ie"ing t+e attriutes o3 a topological o:ect.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are &s or sunets in t+e topology 'ie".
TestProcedure
)n t+e topology 'ie"8 rig+t-clic an & or sunet and t+en c+oose Properties 3rom t+e
s+ortcut menu.
&'pectedesults
T+e attriutes o3 t+e & or sunet are correctly displayed.
emarks >A
nternal T01-010%
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
2
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 4/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
#umer
T-1.1.# Editing a Topological ObjectO!ecti"e To test t+e 3unction o3 editing a topological o:ect.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
T+ere are &s or sunets in t+e topology 'ie".
TestProcedure
)n t+e topology 'ie"8 select an & or a sunet8 and t+en c+oose Edit Cut8 Edit
Copy8 Edit Copy to8 or Edit Move to 3rom t+e main menu. Alternati'ely8 rig+t-
clic t+e & or sunet and c+oose Edit Cut8 Edit Copy8 Edit Copy to8 or Edit
Move to 3rom t+e s+ortcut menu.
&'pectedesults
T+e & or sunet is success3ully cut8 copied or mo'ed.
emarks >A
nternal#umer
T01-010,
T-1.1.$ %etting the &ispla' (ode of the Topolog' View
O!ecti"e To test t+e 3unction o3 setting t+e display mode o3 t+e topology 'ie".
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose View Display Setting Topology Navigator 3rom t+e main menu.
C+oose View Display Setting Legend 3rom t+e main menu.
C+oose View Display Setting Filter 3rom t+e main menu.
C+oose View Display Setting Property 3rom t+e main menu.
C+oose View Display Setting Aerial View 3rom t+e main menu.
C+oose View Display Setting NE Statistis 3rom t+e main menu.
C+oose View Display Setting Topology Navigator8 View Display Setting
Legend8 View Display Setting Filter8 View Display Setting Property8 View
Display Setting Aerial View8 or View Display Setting NE Statistis again to
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
%
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 5/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
close t+e current user inter3ace.
&'pectedesults
T+e topological na'igation tree is correctly displayed.
T+e Legend8 Filter8 and Properties panel is displayed in t+e rig+t area o3 t+e topology
'ie". T+e Legend8 Filter8 and Properties tas are displayed on t+e panel.T+e aerial 'ie" is displayed in t+e lo"er-rig+t area o3 t+e topology 'ie" y de3ault.
emarks >A
nternal#umer
T01-0105
T-1.1.) %earching for Topological Objects
O!ecti"e To test t+e 3unction o3 searc+ing 3or topological o:ects.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
TestProcedure
)n t+e Main Topology8 press t+e s+ortcut eys CtrlBF. T+e Sear! dialog o9 isdisplayed.
#elect a searc+ type 3rom t+e Sear! Type drop-do"n list o9.
#elect a searc+ mode 3rom t+e Sear! Mode drop-do"n list o9.
&nter a ey"ord in t+e "eyword te9t o9.
#elect t+e Mat! w!ole word only c+ec o9 to searc+ 3or o:ects in t+e 3ull matc+
mode.
#elect t+e Case Sensitive c+ec o9 to enale t+e ey"ord searc+ in t+e case-sensiti'e
mode.
#elect t+e Auto sear! wit! spei#ied keyword c+ec o9 ne9t to automatically searc+
3or o:ects.
Clic Sear! to searc+ 3or t+e topological o:ect.
&'pectedesults
T+e re<uired topological o:ect is success3ully searc+ed out.
All t+e matc+ing records are success3ully displayed in t+e list.
Clic Loate$Loate to NE Panel and a single & is located. Clic Loate$Loate to
Topo and t+e node in t+e topology 'ie" is located.
emarks >A
nternal#umer
T01-010
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
,
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 6/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T-1.1.* C"stomi+ing the Topolog' View
O!ecti"e To test t+e 3unction o3 customiing t+e topology 'ie".
Test
#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are &s or sunets in t+e topology 'ie".
TestProcedure
C+oose View New View 3rom t+e main menu.
On t+e %eneral ta in t+e Create Custom Die" dialog o98 enter a name in t+e Na&e te9t o9 and remars in t+e 'e&arks te9t o9.
C+ooseTopology
. T+eSelet ()*et
"indo" is displayed. )n t+e topology 'ie"8 select
t+e re<uired &4s or sunet4s8 rig+t-clic8 c+oose Selet 3rom t+e s+ortcut menu8 and
t+en clic Finis!.
Clic (" . T+e Create Custo& View dialog o9 is closed. )n t+e Con#ir& dialog o98
clic +es to s"itc+ to t+e ne"ly created custom 'ie".
&'pectedesults
T+e custom 'ie" is success3ully created.
;ou can s"itc+ to t+e ne"ly created 'ie" success3ully.
;ou can success3ully s"itc+ to ot+er 'ie"s y selecting t+em in t+e Current View drop-
do"n list o9.
emarks >A
nternal#umer
T01-010
T-1.* Topology +larms
T-1.2.1 Viewing C"rrent !larms of an ,E
O!ecti"e To test t+e 3unction o3 'ie"ing current alarms o3 an &.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are manageale &s in t+e topology 'ie" o3 t+e U2000.
TestProcedure
)n t+e na'igation tree or topology 'ie"8 select an &8 rig+t-clic8 and t+en c+oose
,rowse Current Alar&s 3rom t+e s+ortcut menu.
&'pected
esults
T+e ,rowse Current Alar&s "indo" is correctly displayed. All current alarms 4i3 any
o3 t+e & are success3ully displayed.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
5
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 7/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
emarks >A
nternal#umer
T01-0201
T-1.2.2 !cnowledging !larms of an ,E
O!ecti"e To test t+e 3unction o3 acno"ledging alarms o3 an &.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are manageale &s in t+e topology 'ie" o3 t+e U2000.
TestProcedure
)n t+e na'igation tree or topology 'ie"8 select an &8 rig+t-clic8 and t+en c+oose More
Alar& (perations-$Aknowledge Alar&s 3rom t+e s+ortcut menu. )n t+e Con#ir&
dialog o98 clic +es.
&'pectedesults
T+e alarms o3 t+e & are success3ully acno"ledged.
)n t+e ,rowse Current Alar&s "indo"8 t+e acno"ledgment status8 acno"ledgment
time8 and acno"ledgment user are displayed. )n addition8 a3ter t+e acno"ledgment8
t+e cleared alarms are success3ully mo'ed to t+e +istorical alarm lirary.
emarks !e3ore acno"ledging alarms8 you need to 'ie" t+e current alarms o3 t+e & and notedo"n t+e cleared and uncleared alarms. )n t+is "ay8 you can c+ec "+et+er t+e cleared
alarms are success3ully mo'ed to t+e +istorical alarm lirary a3ter t+ey are
acno"ledged.
nternal#umer
T01-0202
T *,ault Management
T-*.1 +larm Bro$sing
T-2.1.1 Viewing !larms and Eents
O!ecti"e To test t+e 3unction o3 'ie"ing current and +istorical alarms and e'ents.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 8/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
TestProcedure
C+oose Fault ,rowse Current Alar&8 Fault ,rowse /istorial Alar&8 Fault
,rowse Alar& Logs8 or Fault ,rowse Event Logs 3rom t+e main menu. )n t+e Filter
dialog o9 t+at is displayed8 enter t+e parameters and clic (" . T+e "indo"s 3or
ro"sing t+e current alarms8 +istorical alarms8 or alarm logs or e'ent logs are displayed.
Clic Filter8 speci3y t+e 3ilter criteria in t+e Filter dialog o98 and t+en clic (" .
&'pectedesults
T+e Filter dialog o9 is success3ully displayed.
T+e in3ormation aout current alarms8 +istorical alarms8 and alarm logs or e'ent logs is
correctly displayed.
T+e in3ormation aout current alarms8 +istorical alarms8 alarm logs8 or e'ent logs iscorrectly displayed according to di33erent 3ilter criteria.
emarks T+e ,rowse Current Alar& "indo" can display only a limited numer o3 alarms.
@+en t+e total alarms e9ceed t+e limit8 t+e earliest alarms are deleted 3rom t+e "indo".
nternal#umer
T02-0101
T-2.1.2 Collecting the !larm/Eent 0og %tatistics
O!ecti"e To test t+e 3unction o3 collecting alarm or e'ent log statistics.
Test#et$orking
Diagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are manageale &s and some current and +istorical alarms o3 t+e &s on t+e
U2000.
TestProcedure
C+oose Fault 0uery Alar& Log Statistis or Fault 0uery Event Log Statistis
3rom t+e main menu. Clic (" in t+e Filter dialog o9.
C+oose Te&plate Add. )n t+e Add Te&plate dialog o98 set parameters 3or t+e
template and t+en clic Finis!.
Clic Statistis Filter. #et parameters and t+en clic (" .
Clic t+e Pie ta and <uery t+e pie c+art o3 alarm or e'ent logs.
&'pectedesults
T+e template is success3ully added and t+e alarm or e'ent logs t+at statistics arecollected 3or according to t+e template are correct.
T+e U2000 can collect statistics aout t+e numer o3 alarms8 respecti'ely according tot+e statistic 3ilter criteria and ensure t+at t+e statistics are correct.
T+e pie c+art o3 t+e alarm>e'ent logs is correctly displayed.
emarks >A
nternal
#umer
T02-0102
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 9/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T-2.1. %topping the !larm %o"nd
O!ecti"e To test t+e 3unction o3 stopping t+e alarm sound.Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou are logged in to t+e U2000 client success3ully. T+e 3unctions o3 alarm report and
alarm sound indication are enaled.
TestProcedure
C+oose Fault Stop t!e Alar& Sound Per&anently 3rom t+e main menu.Clic +es in
t+e Con3irm dialog o9.
C+oose Fault Stop t!e Current Alar& Sound 3rom t+e main menu.
&'pectedesults
T+e current alarm sound stops and t+ere are no alarm sounds 3or any alarm reported in
t+e 3uture.
T+e current alarm sound stops ut t+ere "ill e alarm sounds 3or alarms reported in t+e3uture.
emarks >A
nternal#umer
T02-010%
T-2.1.# 0ocating an !larm in the Topolog' View
O!ecti"e To test t+e 3unction o3 locating an alarm in t+e topology 'ie".
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
T+ere are some current and +istorical alarms on &s.
TestProcedure
C+oose Fault ,rowse Current Alar& 3rom t+e main menu.
#elect an alarm8 rig+t-clic8 and t+en c+oose Loate in Topology 3rom t+e s+ortcutmenu.
#elect an alarm8 rig+t-clic8 and t+en c+oose Loate to NE Panel 3rom t+e s+ortcut
menu.
&'pectedesults
T+e corresponding & icon is correctly located in t+e topology 'ie".
T+e corresponding & panel is success3ully displayed.
emarks On a local computer8 only topological o:ects can e located 3or t+e U2000 alarms.
nternal T02-010,
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 10/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
#umer
T-2.1.$ %etting the Colors for the !larm %eerit' IndicatorO!ecti"e To test t+e 3unction o3 setting t+e colors 3or t+e alarm se'erity indicator.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
T+ere are alarms o3 di33erent se'erities on t+e U2000.
TestProcedure
C+oose File Pre#erenes 3rom t+e main menu. )n t+e dialog o9 t+at is displayed8
clic Color Settings in na'igation tree.
Modi3y t+e colors 3or alarms o3 di33erent se'erities.
Die" t+e colors o3 alarm indicators 3or &s in t+e topology 'ie".
C+oose Fault ,rowse Current Alar& 3rom t+e main menu. )n t+e ,rowse Current
Alar& "indo"8 'ie" t+e se'erities o3 alarms.
&'pectedesults
T+e alarm indicators 3or &s in t+e topology 'ie" are displayed in colors t+at are
consistent "it+ t+e settings.
)n t+e ,rowse Current Alar& "indo"8 t+e se'erities o3 alarms are displayed in colors
t+at are consistent "it+ t+e settings.
emarks >A
nternal#umer
T02-0105
T-2.1.) &ispla'ing %orted !larms
O!ecti"e To test t+e 3unction o3 displaying sorted alarms.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
Alarms o3 di33erent se'erities are con3igured on t+e U2000.
TestProcedure
C+oose Fault ,rowse Current Alar& 3rom t+e main menu. Die" t+e 'alues in t+e
(urrene Ti&es column in t+e alarm list.
&'pected
esults
T+e numer o3 sorted alarms is displayed in t+e (urrene Ti&es column in t+e alarm
list.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
$
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 11/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
emarks >A
nternal#umer
T02-010
T-*.* +larm ettings
T-2.2.1 !cnowledging !larms !"tomaticall'
O!ecti"e To test t+e 3unction o3 acno"ledging alarms automatically.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are some current alarms on t+e U2000.
TestProcedure
C+oose Fault Settings (ptions 3rom t+e main menu. T+e Alar& (ptions dialog
o9 is displayed.
C+oose Auto Aknowledg&ent 3rom t+e na'igation tree. #et t+e parameters 3or
automatic alarm acno"ledgment and clic (" .
&'pectedesults
Automatic alarm acno"ledgment is success3ully set. T+e cleared alarms areacno"ledged automatically according to t+e settings.
emarks ;ou can c+oose Auto aknowledge leared alar& )y Severity or Auto aknowledge
leared alar& )y 'ule respecti'ely.
nternal#umer
T02-0201
T-2.2.2 edening an !larm or Eent
O!ecti"e To test t+e 3unction o3 rede3ining an alarm or e'ent.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose Fault Settings 'ede#ine 3rom t+e main menu.
)n t+e 'ede#ine "indo"8 clic Add. A dialog o9 is displayed.
On t+e ,asi Settings ta8 set t+e name8 type and se'erity o3 t+e alarm or e'ent t+at
needs to e rede3ined. T+en clic (" .
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
10
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 12/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
#elect a rede3inition record in t+e "indo" and clic Delete. )n t+e Con#ir& dialog o98clic +es.
&'pectedesults
T+e alarm or e'ent is rede3ined success3ully.
For t+e rede3ined alarm or e'ent t+at is ne"ly reported8 t+e related parameters arec+anged according to t+e settings.
T+e rede3inition o3 t+e alarm or e'ent is success3ully deleted.
emarks >A
nternal#umer
T02-0202
T-2.2. (asing an ,E !larm or Eent
O!ecti"e To test t+e 3unction o3 masing an & alarm or e'ent.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose Fault Settings Mask 'ules 3rom t+e main menu.
Clic Add and c+oose Alar& Mask 'ule. T+e Add Alar& Mask 'ule dialog o9 is
displayed. On t+e ,asi Settings ta8 set t+e name8 se'erity8 type and Maintenance#tatus o3 t+e alarm. On t+e Alar& Soure ta8 set t+e & or & type or O:ect elo"
& t+at needs to mas t+e alarm. Clic Next to set t+e e33ecti'e time8 alarm duration andremars and t+en clic Finis!.
Clic Add and c+oose Event Mask 'ule. On t+e ,asi Settings ta8 set t+e name8
se'erity8 type and Maintenance #tatus o3 t+e e'ent. On t+e Event Soure ta8 set t+e &
or & type or O:ect elo" & t+at needs to mas t+e e'ent. Clic Next to set t+ee33ecti'e time and remars and t+en clic Finis!.
)n t+e Mask 'ules "indo"8 select an alarm or e'ent mas rule and clic Delete. )n t+e
Con#ir& dialog o98 clic +es.
&'pected
esults
T+e alarm mas rule and e'ent mas rule are success3ully set.
For t+e ne"ly reported & alarm or e'ent "it+ mas rule8 t+e alarm or e'ent is not
displayed on t+e U2000.
T+e alarm or e'ent mas rule t+at +as een set is success3ully deleted.
emarks >A
nternal#umer
T02-020%
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
11
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 13/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T-2.2.# %etting the (aintenance Experience
O!ecti"e To test t+e 3unction o3 setting t+e maintenance e9perience.
Test
#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+e U2000 communicates "it+ &s success3ully.
TestProcedure
C+oose Fault Settings Experiene 3rom t+e main menu. )n t+e Experiene "indo"8 select an alarm or e'ent.
Clic Modi#y8 enter t+e correct maintenance in3ormation8 and t+en clic (" .
ClicExport
. )n t+eExport Experiene
"indo"8 set t+e 3ile pat+ and e9port scope to
e9port t+e e9perience documents.
Clic 1&port. #et t+e 3ile pat+ and import mode to import t+e maintenance e9perience
documents t+at +a'e een edited.
&'pectedesults
T+e maintenance e9perience documents are success3ully e9ported.
T+e maintenance e9perience documents are success3ully imported.
T+e maintenance in3ormation o3 alarms is success3ully modi3ied.
emarks T+e maintenance e9perience documents are e9ported in t+e lient2lient2report
directory y de3ault.
T+e e9port maintenance e9perience documents are in t+e .txt8 .sv8 .!t&l8 .x&l8 .xls8
.xlsx8 or .pd# 3ormat.
nternal#umer
T02-020,
T-*. +larm or &"ent Dump
T-2..1 &"mping !larms or Eents (an"all'
O!ecti"e To test t+e 3unction o3 dumping alarms or e'ents manually.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are manageale de'ices and +istorical alarms or e'ents on t+e U2000.
TestProcedure
C+oose Ad&inistration Task S!edule Task Manage&ent 3rom t+e main menu.
=ig+t-clic a manual dump tas and c+oose 'un 3rom t+e s+ortcut menu. #et Du&p
pat!8 File type8 and %eneration Ti&e o# Data. T+en clic Du&p immediately to
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
12
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 14/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
per3orm t+e dump tas.
&'pectedesults
T+e e'ent is success3ully dumped in t+e oss2server2var2EventManualDu&p2FM
directory and t+e alarm is success3ully dumped in t+e
oss2server2var2Alar&ManualDu&p2FMdirectory.
emarks )t may tae a long time to dump alarms or e'ents "+en t+ere are many alarms or e'ents.
Only t+e +istorical alarms can e dumped.
A3ter t+e alarms or e'ents are dumped8 t+e alarm or e'ent data is deleted 3rom t+e
dataase o3 t+e U2000.
nternal#umer
T02-0%01
T-2..2 &"mping !larms or Eents !"tomaticall'O!ecti"e To test t+e 3unction o3 dumping alarms or e'ents automatically.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are manageale de'ices and +istorical alarms or e'ents on t+e U2000.
TestProcedure
C+oose Ad&inistration Task S!edule Task Manage&ent 3rom t+e main menu.
C+oose Task TypeData)ase Capaity Manage&ent Alar&2Event Log Du&p
3rom t+e na'igation tree.
=ig+t-clic a manual dump tas and c+oose Attri)utes 3rom t+e s+ortcut menu.
)n t+e Attri)utes dialog o98 set t+e start time. @ait until t+e start time and c+ec t+e
alarm or e'ent dump tas.
&'pectedesults
T+e alarms or e'ents t+at meet conditions are dumped periodically. T+e dump 3ile
3ormat and t+e dump period are correct.
emarks T+e automatic dump period 3or alarms or e'ents is long. 6ence8 it may tae a long time
to test t+is 3unction.
Only t+e +istorical alarms can e automatically dumped.
)3 automatic deletion o3 dump 3iles is enaled8 t+e dumped data in t+e U2000 dataase is
cleared according to t+e settings.
nternal#umer
T02-0%02
T-2.. %aing !larms or Eents as a 3ile
O!ecti"e To test t+e 3unction o3 sa'ing alarms or e'ents as a 3ile.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
1%
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 15/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are alarms or e'ents on t+e U2000.
TestProcedure
C+oose Fault 0uery Alar& Log Statistis or Fault 0uery Event Log Statistis
3rom t+e main menu. )n t+e "indo" t+at is displayed8 clic Save As.
)n t+e Save dialog o98 set t+e 3ile pat+8 3ile name and 3ile type o3 t+e <uery result to e
sa'ed.
Clic Save to sa'e t+e <uery results as a 3ile in t+e speci3ied pat+.
&'pected
esults
T+e <uery results t+at meet t+e conditions are success3ully sa'ed as a 3ile in t+e
speci3ied pat+.
emarks >A
nternal#umer
T02-0%0%
T n"entory Management
T-.1 P/ysical n"entory
T-.1.1 (anaging ,Es
O!ecti"e To test t+e 3unction o3 managing &s.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are manageale de'ices on t+e U2000.
TestProcedure
C+oose 1nventory P!ysial 1nventory 3rom t+e main menu. )n t+e P!ysial
1nventory "indo"8 c+oose NE 3rom t+e na'igation tree.
On t+e NE List ta8 select All 'eords 3rom t+e 3ilter drop-do"n list. Alternati'ely8clic Filter8 speci3y t+e 3ilter criteria8 and t+en clic (" .
#elect one or more records8 rig+t-clic8 and t+en c+oose Set 3ser La)el 3rom t+es+ortcut menu. )n t+e dialog o9 t+at is displayed8 set a custom lael.
On t+e Statistis )y NE ta8 select a statistics type 3rom t+e Statistis Type drop-do"n
list and clic Count.
On t+e Statistis )y Su)net ta8 select a statistics type 3rom t+e Statistis Type drop-
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
1,
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 16/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
do"n list and clic Count.
On t+e E4uivalent NE Statistis ta8 clic Count.
On t+e NE List8 Statistis )y NE8 Statistis )y Su)net or E4uivalent NE Statistis ta8 clic Print to print t+e selected records.
On t+e NE List8 Statistis )y NE8 Statistis )y Su)net or E4uivalent NE Statistis
ta8 clic Save As. )n t+e Saving (ptions dialog o98 set t+e start and end ro"s o3 t+e
data to e sa'ed8 clic ne9t to File na&e to set t+e pat+8 name8 and type o3 t+e 3ile3or sa'ing t+e data8 and clic Save.
)n t+e Saving (ptions dialog o98 clic (" .
&'pectedesults
On t+e NE List ta8 all records are displayed. Alternati'ely8 all records t+at meet t+e
3ilter criteria are displayed.
T+e & in3ormation is success3ully <ueried. )n addition8 t+e in3ormation on t+e & is
consistent "it+ t+e in3ormation on t+e U2000.
A custom lael is success3ully set.
*+ysical statistics are collected y & success3ully.
*+ysical statistics are collected y sunet success3ully.
T+e e<ui'alent & statistics are correctly displayed.
T+e records t+at meet t+e conditions are sa'ed to t+e speci3ied directory.
emarks Only t+e & t+at supports <uery 3rom t+e & can e <ueried.
nternal#umer
T0%-0101
T-.1.2 (anaging 4oards
O!ecti"e To test t+e 3unction o3 managing oards.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere are manageale de'ices on t+e U2000 and t+e de'ices are con3igured "it+ oards.
TestProcedure
C+oose 1nventory P!ysial 1nventory 3rom t+e main menu. )n t+e P!ysial
1nventory "indo"8 c+oose ,oard 3rom t+e na'igation tree.
On t+e ,oard List ta8 select All 'eords 3rom t+e 3ilter drop-do"n list. Alternati'ely8clic Filter8 speci3y t+e 3ilter criteria8 and t+en clic (" .
On t+e ,oard List ta8 select a record and clic 0uery to <uery details aout t+e oard.
#elect one or more records8 rig+t-clic8 and t+en c+oose Set 3ser La)el 3rom t+es+ortcut menu. )n t+e dialog o9 t+at is displayed8 set a custom lael.
On t+e Statistis )y NE ta8 select a statistics type 3rom t+e Statistis Type drop-do"n
list and clic Count.
On t+e Statistis )y Su)net ta8 select a statistics type 3rom t+e Statistis Type drop-
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
15
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 17/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
do"n list and clic Count.
On t+e ,oard List8 Statistis )y NE or Statistis )y Su)net ta8 clic Print to print t+eselected records.
On t+e ,oard List8 Statistis )y NE or Statistis )y Su)net ta8 clic Save As. )n t+e
Saving (ptions dialog o98 set t+e start and end ro"s o3 t+e data to e sa'ed8 clic
ne9t to File na&e to set t+e pat+8 name8 and type o3 t+e 3ile 3or sa'ing t+e data8 and clic
Save.
)n t+e Saving (ptions dialog o98 clic (" .
&'pectedesults
On t+e ,oard List ta8 all records are displayed. Alternati'ely8 all records t+at meet t+e
3ilter criteria are displayed.
T+e detailed in3ormation and t+e suoard and port in3ormation aout eac+ record are
correctly displayed.
T+e oard in3ormation is success3ully <ueried. )n addition8 t+e card in3ormation on t+e & is consistent "it+ t+e card in3ormation on t+e U2000.
A custom lael is success3ully set.
T+e oard statistics are collected success3ully y &.
T+e oard statistics are collected success3ully y sunet.
T+e records t+at meet t+e conditions are sa'ed to t+e speci3ied directory.
emarks Only t+e oard t+at supports <uery 3rom t+e & can e <ueried.
nternal#umer
T0%-0102
T-.1. (anaging 5orts
O!ecti"e To test t+e 3unction o3 managing ports.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
T+ere are manageale de'ices on t+e U2000 and t+e de'ices are con3igured "it+ oardsand ports.
TestProcedure
C+oose 1nventory P!ysial 1nventory 3rom t+e main menu. )n t+e P!ysial
1nventory "indo"8 c+oose Port 3rom t+e na'igation tree.
On t+e Carrier Network Port ta8 clic Filter8 set 3ilter criteria8 and clic (" .
#elect one or multiple records8 rig+t-clic8 and c+oose Set 3ser La)el 3rom t+e s+ortcut
menu. )n t+e dialog o9 t+at is displayed8 set port laels.
On t+e Port Statistis ta8 clic ne9t to NE ()*et to set t+e & o:ect and t+en
clic Count.
On t+e Carrier Network Port5 Port Statistis ta8 clic Print to print t+e selected
records.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
1
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 18/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
On t+e Carrier Network Port5 Port Statistis ta8 clic Save As. )n t+e Saving
(ptions dialog o98 set t+e start and end ro"s o3 t+e data to e sa'ed8 clic ne9t to
File na&e to set t+e pat+8 name8 and type o3 t+e 3ile 3or sa'ing t+e data8 and clic Save.
)n t+e Saving (ptions dialog o98 clic (" .
&'pectedesults
T+e <uali3ied port in3ormation is displayed according to t+e ser'ice type at t+e port8 &type8 and 3ilter criteria.
T+e records t+at meet t+e conditions are sa'ed to t+e speci3ied directory.
emarks For &s o3 di33erent domains8 t+eir ports are displayed di33erently.
nternal#umer
T0%-010%
T-.1.# Managing Telecommunications =oomsO!ecti"e To test t+e 3unction o3 managing telecommunications rooms.
Test#et$orkingDiagram
>A
Prere%uisites 1. T+e U2000 is 3unctioning properly.
2. ;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
Test
Procedure
1. C+oose 1nventory P!ysial 1nventory 3rom t+e main menu. )n t+e P!ysial
1nventory "indo"8 c+oose Teleo&&uniations 'oo& 3rom t+e na'igation tree.2. On t+e Teleo&&uniations 'oo& List ta8 clic New. )n t+e New
Teleo&&uniations 'oo& dialog o98 set parameters suc+ as
Teleo&&uniations 'oo& Na&e8 Station8 Country8 and Provine.
%. #elect All 'eords 3rom t+e drop-do"n list. Alternati'ely8 clic Filter. )n t+e
dialog o9 t+at is displayed8 speci3y t+e 3ilter criteria and clic (" .
,. =ig+t-clic a record in t+e telecommunications room list and c+oose Modi#y 3rom
t+e s+ortcut menu? alternati'ely8 select a record and clic Modi#y. )n t+e dialog o9
t+at is displayed8 modi3y t+e attriutes o3 t+is telecommunications room.
5. #elect one or more records 3rom t+e telecommunications room list8 rig+t-clic8 andt+en c+oose Set 3ser La)el 3rom t+e s+ortcut menu. )n t+e dialog o9 t+at is
displayed8 set t+e user lael.. =ig+t-clic a record in t+e telecommunications room list and c+oose Delete 3rom
t+e s+ortcut menu? alternati'ely8 select a record and clic Delete. )n t+e
con3irmation dialog o98 clic +es.
. #elect a record 3rom t+e telecommunications room list and clic 1nstall
'aks2NMSs. )n t+e 1nstall 'aks2NMSs dialog o98 c+oose suracs or M#s
3rom t+e na'igation tree and clic (" .
. #elect a telecommunications room t+at is con3igured "it+ suracs or M#s 3rom
t+e telecommunications room list. On t+e 'ak2NMS 1n#or&ation ta in t+e lo"er
pane8 select t+e surac or M# and clic 3ninstall 'aks2NMSs.
$. Clic t+e Teleo&&uniations 'oo& Statistis ta. #elect t+e re<uired type 3rom
t+e Statistis Type drop-do"n list.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
1
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 19/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
10. On t+e Teleo&&uniations 'oo& List or Teleo&&uniations 'oo& Statistis ta8 clic Save As. )n t+e Saving (ptions dialog o98 set t+e start and end ro"s o3
t+e data to e sa'ed8 clic ne9t to File na&e to set t+e pat+8 name8 and type o3
t+e 3ile 3or sa'ing t+e data8 and clic Save.
)n t+e Saving (ptions dialog o98 clic (" .
&'pectedesults
1. T+e telecommunications room is created success3ully and its con3iguration data
displayed on t+e Teleo&&uniations 'oo& List ta is t+e same as t+e preset
data.
2. All records or t+e re<uired records are displayed on t+e Teleo&&uniations
'oo& List ta.
%. T+e telecommunications room is modi3ied success3ully and t+e telecommunicationsroom list is re3res+ed.
,. T+e user lael is set success3ully.
5. T+e telecommunications room is deleted success3ully and t+e telecommunications
room list is re3res+ed a3ter you clic +es.. T+e surac or M# is installed success3ully and t+e tale on t+e 'ak2NMS
1n#or&ation ta is re3res+ed.
. T+e surac or M# is uninstalled success3ully and t+e tale on t+e 'ak2NMS
1n#or&ation ta is re3res+ed.
. #tatistics on telecommunications rooms o3 t+e selected type are displayed.
$. =ecords are sa'ed to a 3ile in t+e pat+ t+at you speci3ied.
emarks Column "idt+ can e customied in t+e Colu&n Settings dialog o9.
nternal#umer
T0%-010,
T-.1.$ (anaging acs
O!ecti"e To test t+e 3unction o3 managing racs.
Test#et$orkingDiagram
>A
Prere%uisites 1. T+e U2000 is 3unctioning properly.
2. ;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
TestProcedure
1. C+oose 1nventory P!ysial 1nventory 3rom t+e main menu. )n t+e P!ysial
1nventory "indo"8 c+oose 'ak 3rom t+e na'igation tree.
2. On t+e 'ak List ta8 clic New. )n t+e New 'ak dialog o98 set parameters suc+as 'ak Type8 'ak Na&e8 Nu&)er o# S!elves8 /eig!t8 6idt!8 and Dept!.
%. #elect All 'eords 3rom t+e drop-do"n list. Alternati'ely8 clic Filter. )n t+e
dialog o9 t+at is displayed8 speci3y t+e 3ilter criteria and clic (" .
,. =ig+t-clic a record in t+e rac list and c+oose Modi#y 3rom t+e s+ortcut menu?
alternati'ely8 select a record and clic Modi#y. )n t+e dialog o9 t+at is displayed8
modi3y rac attriutes.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
1
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 20/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
5. #elect one or more records 3rom t+e rac list8 rig+t-clic8 and t+en c+oose Set 3ser
La)el 3rom t+e s+ortcut menu. )n t+e dialog o9 t+at is displayed8 set t+e user lael.
. =ig+t-clic a record in t+e rac list and c+oose Delete 3rom t+e s+ortcut menu?
alternati'ely8 select a record and clic Delete. )n t+e con3irmation dialog o98 clic
+es.. Clic t+e 'ak Statistis ta. #elect t+e re<uired type 3rom t+e Statistis Type
drop-do"n list.
. On t+e 'ak List or 'ak Statistis ta8 clic Save As. )n t+e Saving (ptions
dialog o98 set t+e start and end ro"s o3 t+e data to e sa'ed8 clic ne9t to File
na&e to set t+e pat+8 name8 and type o3 t+e 3ile 3or sa'ing t+e data8 and clic Save.
)n t+e Saving (ptions dialog o98 clic (" .
&'pectedesults
1. T+e rac is created success3ully and its con3iguration data displayed on t+e 'ak
List ta is t+e same as t+e preset data.
2. All records or re<uired records are displayed on t+e 'ak List ta.
%. T+e rac is modi3ied success3ully and t+e rac list is re3res+ed.
,. T+e user lael is set success3ully.
5. T+e rac is deleted success3ully and t+e rac list is re3res+ed a3ter you clic +es.
. #tatistics on racs o3 t+e selected type are displayed.
. =ecords are sa'ed to a 3ile in t+e pat+ t+at you speci3ied.
emarks Column "idt+ can e customied in t+e Colu&n Settings dialog o9.
nternal#umer
T0%-0105
T-.1.) (anaging %"bracs
O!ecti"e To test t+e 3unction o3 managing suracs.
Test#et$orkingDiagram
>A
Prere%uisites 1. T+e U2000 is 3unctioning properly.
2. ;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.%. Managed de'ices +a'e een added to t+e U2000.
TestProcedure
1. C+oose 1nventory P!ysial 1nventory 3rom t+e main menu. )n t+e P!ysial
1nventory "indo"8 c+oose Su)rak 3rom t+e na'igation tree.
2. #elect All 'eords 3rom t+e drop-do"n list. Alternati'ely8 clic Filter. )n t+e
dialog o9 t+at is displayed8 speci3y t+e 3ilter criteria and clic (" .
%. #elect a record 3rom t+e surac list and clic t+e Detail 1n#or&ation and ,oard
tas to 'ie" t+e details o3 t+is surac.
,. #elect one or more records 3rom t+e surac list8 rig+t-clic8 and t+en c+oose Set
3ser La)el 3rom t+e s+ortcut menu. )n t+e dialog o9 t+at is displayed8 set t+e userlael.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
1$
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 21/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
5. Clic t+e Su)rak Statistis ta. #elect t+e re<uired type 3rom t+e Statistis Type drop-do"n list.
. On t+e Su)rak List or Su)rak Statistis ta8 clic Save As. )n t+e Saving
(ptions dialog o98 set t+e start and end ro"s o3 t+e data to e sa'ed8 clicne9t to File na&e to set t+e pat+8 name8 and type o3 t+e 3ile 3or sa'ing t+e data8 andclic Save.
)n t+e Saving (ptions dialog o98 clic (" .
&'pectedesults
1. All records or t+e re<uired records are displayed on t+e Su)rak List ta.
2. T+e details and oard in3ormation o3 eac+ surac are displayed.
%. T+e user lael is set success3ully.
,. #tatistics on suracs o3 t+e selected type are displayed.
5. =ecords are sa'ed to a 3ile in t+e speci3ied pat+ according to 3ilter criteria.
emarks Column "idt+ can e customied in t+e Colu&n Settings dialog o9.
nternal Number
T0%-010
T-.1.* (anaging %"bboards
O!ecti"e To test t+e 3unction o3 managing suoards.
Test#et$orkingDiagram
>A
Prere%uisites 1. T+e U2000 is 3unctioning properly.
2. ;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
%. Managed de'ices +a'e een added to t+e U2000 and oards and suoards +a'e
een added to all t+ese de'ices.
TestProcedure
1. C+oose 1nventory P!ysial 1nventory 3rom t+e main menu. )n t+e P!ysial
1nventory "indo"8 c+oose Su))oard 3rom t+e na'igation tree.
2. On t+e Su))oard List ta8 select All 'eords 3rom t+e drop-do"n list.Alternati'ely8 clic Filter. )n t+e dialog o9 t+at is displayed8 speci3y t+e 3ilter
criteria and clic (" .
%. #elect a record 3rom t+e suoard list and clic t+e Detail 1n#or&ation and Port tas to 'ie" t+e details and port in3ormation o3 t+is suoard.
,. #elect a record 3rom t+e suoard list and clic 0uery.
5. #elect one or more records 3rom t+e suoard list8 rig+t-clic8 and t+en c+oose Set
3ser La)el 3rom t+e s+ortcut menu. )n t+e dialog o9 t+at is displayed8 set t+e userlael.
. Clic t+e Su))oard Statistis ta. #elect t+e re<uired type 3rom t+e Statistis
Type drop-do"n list.
. On t+e Su))oard List or Su))oard Statistis ta8 clic Save As. )n t+e Saving
(ptions dialog o98 set t+e start and end ro"s o3 t+e data to e sa'ed8 clic
ne9t to File na&e to set t+e pat+8 name8 and type o3 t+e 3ile 3or sa'ing t+e data8 and
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
20
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 22/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
clic Save.)n t+e Saving (ptions dialog o98 clic (" .
&'pectedesults
1. All records or re<uired records are displayed on t+e Su))oard List ta.
2. T+e details and port in3ormation o3 eac+ suoard are displayed.%. #uoard in3ormation is displayed and is t+e same et"een t+e U2000 and &s.
,. T+e user lael is set success3ully.
5. #tatistics on suoards o3 t+e selected type are displayed.
. =ecords are sa'ed to a 3ile in t+e speci3ied pat+ according to 3ilter criteria.
emarks 1. ;ou can collect statistics only on t+e de'ices t+at +a'e suoards.
2. ;ou can <uery t+e details o3 suoards t+at only support &-side <ueries.
%. Column "idt+ can e customied in t+e Colu&n Settings dialog o9.
nternal
#umer
T0%-010
T-.1.6 Collecting %lot 7sage %tatistics
O!ecti"e To test t+e 3unction o3 collecting slot usage statistics.
Test#et$orkingDiagram
>A
Prere%uisites 1. T+e U2000 is 3unctioning properly.
2. ;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
1. C+oose 1nventory P!ysial 1nventory 3rom t+e main menu. )n t+e P!ysial
1nventory "indo"8 c+oose Slot 3sage Statistis 3rom t+e na'igation tree.
2. On t+e Statistis )y NE Type ta8 clic Filter ne9t to NE ()*et. )n t+e dialog
o9 t+at is displayed8 c+oose t+e re<uired & o:ects 3rom t+e na'igation tree andclic (" .
%. #elect t+e re<uired &s and clic Count to re3res+ data.
,. Clic Save As. )n t+e Saving (ptions dialog o98 set t+e start and end ro"s o3 t+e
data to e sa'ed8 clic ne9t to File na&e to set t+e pat+8 name8 and type o3 t+e3ile 3or sa'ing t+e data8 and clic Save.)n t+e Saving (ptions dialog o98 clic (" .
&'pectedesults
1. #lot in3ormation o3 t+e re<uired & o:ects is displayed.
2. =ecords are sa'ed to a 3ile in t+e speci3ied pat+ according to 3ilter criteria.
emarks 1. )n t+e Selet NE ()*et dialog o98 you can c+oose t+e re<uired & o:ects 3rom
t+e na'igation tree. Alternati'ely8 clic Find O:ect8 )n t+e Find ()*et dialog
o98 set Content or Sear! Model.
2. @+en multiple clients are logged in8 a3ter a user clics Count8 data in t+e ser'erdataase can e re3res+ed to t+e clients in real time.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
21
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 23/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
%. (ata o3 t+e selected records is sa'ed as E/#E8 E/#8 TET8 6TM/8 or C#D 3iles int+e lient7lient7report 3older y de3ault. ;ou can c+ange t+e pat+ 3or sa'ing t+e
3iles i3 necessary.
nternal#umer
T0%-010
T-.1.8 (anaging Optical/Electrical (od"les
O!ecti"e To test t+e 3unction o3 managing optical modules.
Test#et$orkingDiagram
one
Prere%uisites 1. T+e U2000 is 3unctioning properly.2. ;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
%. T+ere are manageale de'ices on t+e U2000.
TestProcedure
1. C+oose 1nventory P!ysial 1nventory 3rom t+e main menu.
)n t+e P!ysial 1nventory "indo"8 c+oose (ptial2Eletrial Module 3rom t+e
na'igation tree.
2. On t+e SFP 1n#or&ation 'eport ta8 clic Filter ne9t to Filter Sope.)n t+e dialog o9 t+at is displayed8 select t+e target oard and clic (" .
%. Clic t+e 'outer and Swit! (ptial2Eletrial Module List ta.
#elect All 'eords. Alternati'ely8 clic Filter8 set 3ilter criteria in t+e Filter dialog o98 and clic (" .
,. #elect one or more records8 rig+t-clic8 and c+oose Set Port 3ser La)el 3rom t+e
s+ortcut menu.)n t+e dialog o9 t+at is displayed8 set t+e user lael.
5. Clic t+e 'outer and Swit! (ptial2Eletrial Module Statistis ta.
Clic ne9t to Statistis Sope.
)n t+e dialog o9 t+at is displayed8 select t+e target & and clic (" .#elect t+e desired statistics type 3rom t+e Statistis Type drop-do"n list8 and clic
Count.
. To print t+e desired records8 clic Print on t+e SFP 1n#or&ation 'eport8 'outer
and Swit! (ptial2Eletrial Module List8 or 'outer and Swit!(ptial2Eletrial Module Statistis ta.
. To sa'e data8 per3orm t+e 3ollo"ing operationsClic Save As on t+e SFP 1n#or&ation 'eport8 'outer and Swit!
(ptial2Eletrial Module List8 or 'outer and Swit! (ptial2Eletrial
Module Statistis ta.)n t+e Saving (ptions dialog o98 set t+e start and end ro"s o3 t+e data to e
sa'ed8 clic ne9t to File na&e to set t+e pat+8 name8 and type o3 t+e 3ile 3or
sa'ing t+e data8 and clic Save.)n t+e Saving (ptions dialog o98 clic (" .
&'pected
esults
T+e SFP 1n#or&ation 'eport ta is displayed.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
22
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 24/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T+e in3ormation aout t+e desired optical>&lectrical modules is displayed.
T+e in3ormation aout t+e optical>&lectrical modules o3 t+e selected router or s"itc+ isdisplayed.
T+e port user lael is set success3ully.
T+e desired statistics on t+e optical modules o3 t+e target router or s"itc+ are displayed.
T+e desired records are printed.
T+e records are sa'ed to t+e speci3ied directory.
emarks Only t+e optical>&lectrical module t+at supports <uery 3rom t+e & can e <ueried.
nternal#umer
T0%-010$
T 0#M ecurity Management
T-0.1 ecurity Management
T-#.1.1 (anaging 7sers
O!ecti"e To test t+e 3unction o3 managing users.
Test#et$orking
Diagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose Ad&inistration NMS Seurity NMS 3ser Manage&ent 3rom t+e main
menu.
Die" in3ormation aout a single user #elect a user 3rom t+e na'igation tree. T+en8 in t+erig+t pane8 clic t+e Details8 3ser %roups8 ACL8 Do&ain8 or (peration 'ig!ts ta
respecti'ely to 'ie" t+e in3ormation aout t+e user.
Create a user =ig+t-clic 3ser in t+e na'igation tree and c+oose New 3ser 3rom t+e
s+ortcut menu. )n t+e New 3ser dialog o98 enter t+e user name and pass"ord and sett+e parameters. T+en8 clic (" or Apply.
#et general attriutes o3 a user #elect a user 3rom t+e na'igation tree. On t+e Details tain t+e rig+t pane8 set t+e general attriutes o3 a user as 3ollo"s Full na&e8 Desription8 'e4uire user to !ange password on next login8 Allow user to !ange password5
Disa)le user aount5 Maxi&u& nu&)er o# online users8 Auto-logout i# no ativity
wit!in8&inutes9 51native user poliy and Login period.
#et t+e user group o3 a user #elect a user 3rom t+e na'igation tree. On t+e 3ser %roups ta in t+e rig+t pane8 clic Add. )n t+e Add 3ser %roup dialog o98 select a user group
and clic (" . Alternati'ely8 on t+e 3ser %roup ta8 select t+e user group o3 a user and
clic Delete. )n t+e Con#ir& dialog o98 clic +es.
#et AC/ o3 a user #elect a user 3rom t+e na'igation tree. On t+e ACL ta in t+e rig+t
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
2%
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 25/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
pane8 select Set Syste& ACL and clic Add. )n t+e "indo" t+at is displayed8 set related parameters and t+en clic (" . Alternati'ely8 select 3se spei#ied ACLs and set t+e )*
addresses t+at can e used to access t+e current ser'er.
#et t+e domain o3 a user #elect a user 3rom t+e na'igation tree. On t+e Do&ain ta in
t+e rig+t pane8 clic Selet. )n t+e Selet Do&ain dialog o98 select t+e &8 & sets8and sunets to e added to t+e domain and clic (" . Alternati'ely8 select All ()*ets8
()*et Set8 Su)net Devie Set8 Devie or Su)net 3rom Availa)le ()*ets to Seleted
()*ets and clic (" . Alternati'ely8 select All ()*ets8 ()*ets set8 Su)net Devie
Set8 Devie or Su)net to e deleted 3rom Seleted ()*ets to Availa)le ()*ets andclic (" .
(elete a user #elect a user 3rom t+e na'igation tree8 rig+t-clic8 and t+en c+oose Delete
3rom t+e s+ortcut menu. )n t+e Con#ir& dialog o98 clic +es.
&'pectedesults
T+e M# User Management "indo" is success3ully displayed.
T+e in3ormation aout all managed user is success3ully <ueried.
T+e user is success3ully created. T+e user is added to t+e U2000.
T+e general attriutes o3 t+e user are success3ully set.
T+e user group o3 t+e user is success3ully set.
T+e AC/ o3 t+e user is success3ully set.
T+e domain o3 t+e user is success3ully set.
T+e user is success3ully deleted. T+e deleted user is no longer displayed in t+e user listand t+e user no longer e9ists on t+e U2000.
emarks T+e name o3 t+e user to e created must e uni<ue. Only t+e user t+at +as rig+ts to
manage all user groups can create a user t+at elongs to no group.
T+e de3ault user ad&in cannot e deleted. Only user ad&in can delete t+e user t+at +as
security operation rig+ts.@+en t+e rig+ts o3 an online user are set8 t+e U2000 roadcasts t+e message to t+e
online user.
Only user ad&in can assign t+e security operation rig+ts to ot+er users.
T+e pass"ord 3or t+e ne" user must meet t+e re<uirements on t+e pass"ord policy. T+euser can set t+e pass"ord policy as 3ollo"s C+oose Ad&inistration NMS Seurity
Seurity Poliies 3rom t+e main menu. On t+e Password Poliy ta8 set t+e policies.
nternal#umer
T0,-0101
T-#.1.2 (anaging 7ser 9ro"ps
O!ecti"e To test t+e 3unction o3 managing user groups.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
2,
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 26/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
TestProcedure
C+oose Ad&inistration NMS Seurity NMS 3ser Manage&ent 3rom t+e mainmenu.
uery in3ormation aout all user groups Clic 3ser %roup in t+e na'igation tree. T+en8
in t+e rig+t pane8 'ie" t+e rie3 in3ormation aout t+e managed user groups.
uery in3ormation aout a single user group Clic a user group in t+e na'igation tree.T+en8 in t+e rig+t pane8 clic t+e Details8 Me&)ers8 Do&ain8 (peration 'ig!ts8 or
Current Session ta to 'ie" t+e in3ormation aout t+e user group.
Create a user group =ig+t-clic t+e 3ser %roup in t+e na'igation tree and c+oose New
3ser %roup 3rom t+e s+ortcut menu. )n t+e New 3ser %roup dialog o98 enter t+e
name and description. T+en8 clic Finis!.
#et t+e general attriutes o3 a user group #elect a user group 3rom t+e na'igation tree.
On t+e Details ta in t+e rig+t pane8 set t+e general attriutes o3 t+e user group8 suc+ as
name and description.
Manage t+e memers o3 a user group #elect a user group 3rom t+e na'igation tree. Ont+e Me&)ers ta in t+e rig+t pane8 add or delete memers o3 t+e user group.
#et t+e operation rig+ts o3 a user group #elect a user group 3rom t+e na'igation tree. On
t+e (peration 'ig!ts ta in t+e rig+t pane8 clic Selet. )n t+e Selet (peration 'ig!ts
dialog o98 select Aut!ori:ation ()*ets and (perations. )3 t+ere are Aut+oriationo:ects8 select t+e o:ects 3rom t+e (peration 3ield and select t+e speci3ic aut+oried
rig+ts in t+e rig+t pane. T+en8 clic . Alternati'ely8 select t+e operation rig+ts
to e deleted and clic . T+en8 clic (" .
#et t+e domain o3 a user group #elect a user group 3rom t+e na'igation tree. On t+e
Do&ain ta in t+e rig+t pane8 clic Selet. )n t+e Selet Do&ain dialog o98 select t+e
o:ect sets and sunets to e added to t+e domain and clic (" . Alternati'ely8 clear t+eo:ect sets and sunets t+at need not e added into t+e domain. )n t+e Con#ir& dialog
o98 clic +es.
(elete a user group =ig+t-clic a user group in t+e na'igation tree and c+oose Delete
3rom t+e s+ortcut menu. )n t+e Con#ir& dialog o98 clic +es.
&'pectedesults
T+e M# User Management "indo" is success3ully displayed.
T+e in3ormation aout all managed user groups is success3ully <ueried.
T+e in3ormation aout a single user group is success3ully <ueried.
T+e user group is success3ully created. T+e ne" user group is displayed in t+e user
group list and is added to t+e U2000.
T+e general attriutes o3 a user group are success3ully set.
T+e memers o3 a user group are success3ully set.
T+e operation rig+ts o3 a user group are success3ully set.
T+e domains o3 a user group are success3ully set.
T+e user group is success3ully deleted. T+e deleted user group is no longer displayed in
t+e user group list and no longer e9ists on t+e U2000.
emarks T+e name o3 t+e user group to e created must e uni<ue.
T+e user group named all user groups cannot e created.
Only user ad&inistrator can assign t+e security operation rig+ts to ot+er users.
T+e user t+at +as rig+ts to manage certain user groups can add or delete memers o3 a
non-security user group. )n ot+er cases8 only a user t+at +as rig+ts to manage all user
groups can per3orm operations on t+e user group.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
25
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 27/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T+e U2000 pro'ides some user groups y de3ault. T+ese de3ault user groups are t+esame as t+e common user groups8 e9cept t+at t+ey are precon3igured during t+e
installation.
)3 t+e user elongs to a certain user group8 t+e user cannot modi3y t+e attriutes o3 t+e
user group.
nternal#umer
T0,-0102
T-#.1. (anaging Operation %ets
O!ecti"e To test t+e 3unction o3 managing operation sets.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose Ad&inistration NMS Seurity NMS 3ser Manage&ent 3rom t+e main
menu.
Create an operation set =ig+t-clic t+e (peration Set in t+e na'igation tree and c+oose
New (peration Set 3rom t+e s+ortcut menu. )n t+e New (peration Set dialog o98
enter t+e name and description and select Type. T+en8 clic (" or Apply.
Modi3y an operation set #elect an operation set 3rom t+e na'igation tree. On t+e Detailsta in t+e rig+t pane8 set t+e name and description. On t+e Me&)ers ta8 add or delete
memers o3 t+e operation set.
(elete an operation set =ig+t-clic an operation set in t+e na'igation tree and c+oose
Delete 3rom t+e s+ortcut menu. )n t+e Con#ir& dialog o98 clic +es.
&'pectedesults
T+e operation set is success3ully created. T+e ne" operation set is displayed in t+eoperation set list and is added to t+e U2000.
T+e general attriutes and memers o3 t+e operation set are success3ully modi3ied.
T+e operation set is success3ully deleted. T+e deleted operation set is no longer
displayed in t+e operation set list and t+e no longer e9ists on t+e U2000.
emarks T+e name o3 t+e operation set to e created must e uni<ue.T+e U2000 pro'ides some operation sets y de3ault. T+ese de3ault operation sets are t+e
same as t+e ordinary operation sets8 e9cept t+at t+ey are precon3igured during t+e
installation.
Only t+e user ad&inistrator can assign t+e security operation rig+ts and delete t+eoperation sets o3 security sutype.
nternal#umer
T0,-010%
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
2
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 28/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T-#.1.# (anaging Object %ets
O!ecti"e To test t+e 3unction o3 managing o:ect sets.
Test
#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose Ad&inistration NMS Seurity NMS 3ser Manage&ent 3rom t+e mainmenu.
Create an o:ect set =ig+t-clic ()*et Set in t+e na'igation tree and c+oose New
()*et Set 3rom t+e s+ortcut menu. )n t+e New ()*et Set dialog o98 enter t+e name
and description. T+en8 clic (" or Apply.
Modi3y an o:ect set #elect t+e o:ect set 3rom t+e na'igation tree. On t+e Details ta int+e rig+t pane8 set t+e description. On t+e Me&)ers ta8 add or delete memers o3 t+eo:ect set.
(elete an o:ect set =ig+t-clic t+e o:ect set in t+e na'igation tree and c+oose Delete
3rom t+e s+ortcut menu. )n t+e Con#ir& dialog o98 clic +es.
&'pectedesults
T+e o:ect set is success3ully created. T+e ne" o:ect set is displayed in t+e o:ect set
list and is added to t+e U2000.
T+e general attriutes and memers o3 t+e o:ect set are success3ully modi3ied.
T+e o:ect set is success3ully deleted. T+e deleted o:ect set is no longer displayed in t+e
o:ect set list and no longer e9ists on t+e U2000.
emarks T+e name o3 t+e o:ect set to e created must e uni<ue.
nternal#umer
T0,-010,
T-#.1.$ (anaging the !C0 0ist
O!ecti"e To test t+e 3unction o3 managing t+e AC/ list.
Test
#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose Ad&inistration NMS Seurity Syste& ACL 3rom t+e main menu.
)n t+e Syste& ACL dialog o98 clic Add.
)n t+e Add Syste& Aess Control 1te& dialog o98 add t+e )* addresses or )* range
and clic (" .
&'pected T+e AC/ list is success3ully re3res+ed.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
2
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 29/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
esults
emarks T+e user cannot log in to t+e U2000 t+roug+ an )* address t+at is not included in t+eAC/ list.
nternal#umer
T0,-0105
T-0.* Client +ccess Control
T-#.2.1 0ocing and 7nlocing a Client
O!ecti"e To test t+e 3unctions o3 locing and unlocing a client.
Test
#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
/oc a client C+oose File Lok Ter&inal 3rom t+e main menu to loc a client.
Unloc a client )n t+e loked dialog o98 press CtrlBAltB3 according to t+e
instructions. )n t+e unlok dialog o98 enter t+e pass"ord and clic (" .
&'pected
esults
T+e client is success3ully loced and t+e user cannot per3orm any operation on t+e
client.T+e client is success3ully unloced and t+e user can per3orm operations on t+e clientagain.
emarks >A
nternal#umer
T0,-0201
T-#.2.2 %etting the !"tomatic 0oc Time of the Client
O!ecti"e To test t+e 3unction o3 setting t+e automatic loc time o3 t+e client.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operationrig+ts.
TestProcedure
C+oose File Pre#erenes 3rom t+e main menu. )n t+e dialog o9 t+at is displayed8
c+oose Lok Settings 3rom t+e na'igation tree.
#et t+e automatic loc time o3 t+e client )n t+e Lok Settings8#or Current 3ser9 area8
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
2
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 30/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
select t+e c+ec o9 ne9t to Auto&atially lok ter&inal8 set t+e time in t+e line elo"8and t+en clic (" .
Cancel an automatic loc )n t+e Lok Settings8#or Current 3ser9 area8 clear t+e c+ec
o9 ne9t to Auto&atially lok ter&inal and clic (" .
&'pectedesults
T+e automatic loc time o3 t+e client is success3ully set. T+e client is automatically
loced a3ter t+e speci3ied period o3 inacti'ity.
T+e automatic loc o3 t+e client is success3ully canceled. T+e client is not loced
automatically.
emarks >A
nternal#umer
T0,-0202
T-#.2. 3orcing a 7ser to Exit
O!ecti"e To test t+e 3unction o3 3orcing a user to e9it.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
T+ere is anot+er online client e9cept t+e current client on t+e U2000.
TestProcedure
/og in to t+e U2000 as a super user. C+oose Ad&inistration NMS Seurity
Monitor 3ser Sessions 3rom t+e main menu.
)n t+e session monitor list8 select a user8 rig+t-clic8 and t+en c+oose Fore 3ser to Log
(ut 3rom t+e s+ortcut menu. Alternati'ely8 select a user and clic Fore 3ser to Log
(ut. )n t+e Con#ir& dialog o98 clic +es.
&'pectedesults
T+e user is 3orced to e9it success3ully8 and t+e client t+at t+e user logs in to is 3orced to
e9it.
emarks A user cannot 3orce itsel3 to e9it.
User ad&in cannot e 3orced to e9it.
nternal#umer
T0,-020%
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
2$
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 31/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T #M 2og Management
T-.1 #M Operation 2ogs
T-$.1.1 Viewing the 72::: 0ogs
O!ecti"e To test t+e 3unction o3 'ie"ing t+e U2000 logs.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose Ad&inistration Log Manage&ent 0uery (peration Logs8 Ad&inistration Log Manage&ent 0uery Syste& Logs8 or Ad&inistration Log
Manage&ent 0uery Seurity Logs 3rom t+e main menu.
)n t+e Filter dialog o98 speci3y t+e 3ilter criteria. T+en8 clic (" to 'ie" t+e logs.
)n t+e 0uery (peration Logs8 0uery Syste& Logs or 0uery Seurity Logs "indo"8
select one log8 rig+t-clic and t+en c+oose Details 3rom t+e s+ortcut menu to 'ie"details aout t+e logs.
&'pectedesults
/ogs are success3ully <ueried and displayed according to di33erent <uery conditions.
(etails o3 t+e logs can e <ueried success3ully.
emarks T+e M# logs consist o3 operation logs8 security logs8 and system logs. For details on
t+e operations8 see HTest *rocedureH and H&9pected =esults.H
nternal#umer
T05-0101
T-.* 2og torage
T-$.2.1 %aing and &"mping ,(% 0ogs as a 3ile
O!ecti"e To test t+e 3unctions o3 sa'ing and dumping M# logs as a 3ile.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
%0
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 32/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
TestProcedure
C+oose Ad&inistration Log Manage&ent 0uery (peration Logs8
Ad&inistration Log Manage&ent 0uery Syste& Logs8 or Ad&inistration Log
Manage&ent 0uery Seurity Logs 3rom t+e main menu and speci3y t+e 3ilter criteria
to display t+e re<uired logs.
)n t+e log list8 rig+t-clic and c+oose Save Spei#ied 'eords 3rom t+e s+ortcut menu.)n t+e Save Spei#ied 'eords dialog o98 set t+e start and end ro"s o3 t+e data to e
sa'ed8 clic ne9t to File na&e to set t+e pat+8 name8 and type o3 t+e 3ile 3or sa'ing
t+e data8 and clic Save.)n t+e Save Spei#ied 'eords dialog o98 clic (" .
&'pectedesults
/ogs are sa'ed success3ully and t+e speci3ied logs are sa'ed as a 3ile in t+e speci3ied pat+.
emarks T+ere are t+ree items on t+e s+ortcut menu8 Save All 'eords8 Save Seleted 'eords8and Save Spei#ied 'eords.
nternal#umer
T05-0201
T 3Dataase Backup Management
T-3.1 Dataase Backup
T-).1.1 4acing 7p a &atabase
O!ecti"e To test t+e 3unction o3 acing up a dataase.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose Ad&inistration ,ak 3p2'estore NMS Data Data)ase ,akup 3rom t+e
main menu.
)n t+e ,akup 3ield8 enter t+e acup pat+ and clic ,akup.
&'pectedesults
T+e data o3 t+e dataase is success3ully aced up to t+e speci3ied directory.
emarks T+e acup operation is time-consuming. T+ere3ore8 "ait patiently during t+e acup.
nternal#umer
T0-0101
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
%1
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 33/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
T 4#M 2icense Management
T-4.1 #M 2icense
T-*.1.1 ;"er'ing the 0icense
O!ecti"e To test t+e 3unction o3 <uerying t+e license.
Test#et$orkingDiagram
>A
Prere%uisites T+e U2000 is 3unctioning properly.
;ou +a'e logged in to t+e U2000 and +a'e t+e re<uired management and operation
rig+ts.
TestProcedure
C+oose /elp $ Liense Manage&ent$Liense 1n#or&ation 3rom t+e main menu. T+eLiense 1n#or&ation "indo" is displayed.
Clic t+e 'esoure Control 1te& and Funtion Control 1te& tas respecti'ely to 'ie"
t+e license in3ormation.
&'pectedesults
T+e license in3ormation aout t+e U2000 is correctly displayed.
emarks >A
nternal#umer
T0-0101
T 5ystem Monitoring and Management
T-5.1 ystem Monitoring
T-6.1.1 ;"er'ing and (aintaining 5rocess 5arameters
O!ecti"e To test t+e 3unctions o3 <uerying and maintaining process parameters.
Test#et$orkingDiagram
>A
Prere%uisites T+e ser'er "ors properly.
T+e system monitor process is ended.
TestProcedure
#tart t+e #ystem Monitor client. T+en8 clic t+e Servie Monitor ta a3ter a success3ullogin.
=ig+t-clic a ser'ice process and c+oose Details 3rom t+e s+ortcut menu. )n t+e dialog
o9 t+at is displayed8 'ie" t+e in3ormation aout t+e process.
=ig+t-clic a running ser'ice process "+ose startup mode is Manual and c+oose
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
%2
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 34/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
Startup Mode Auto&ati 3rom t+e s+ortcut menu.
=ig+t-clic a running ser'ice process "+ose startup mode is Auto&ati and c+oose
Startup Mode Manual 3rom t+e s+ortcut menu.
#elect t+e processes selected in #teps % and ,8 rig+t-clic8 and c+oose Stop t!e Servie
3rom t+e s+ortcut menu.
#elect t+e ser'ice process selected in #tep %8 rig+t-clic8 and c+oose Start t!e Servie
3rom t+e s+ortcut menu.
#elect t+e ser'ice process selected in #tep ,8 rig+t-clic8 and c+oose Startup Mode
Disa)led 3rom t+e s+ortcut menu.
&'pectedesults
A3ter #tep %8 t+e startup mode o3 t+e selected ser'ice process is c+anged to Auto&ati.
A3ter #tep ,8 t+e startup mode o3 t+e selected ser'ice process is c+anged to Manual.
A3ter #tep 58 t+e stopped ser'ice process is not automatically started.
A3ter #tep 8 t+e status o3 t+e ser'ice process is running.
A3ter #tep 8 t+e startup mode o3 t+e selected ser'ice process is c+anged to Disa)led.
emarks >A
nternal#umer
T0-0101
T-6.1.2 ;"er'ing and (aintaining the %'stem (onitoring 5arameters
O!ecti"e To test t+e 3unctions o3 <uerying and maintaining t+e system monitoring parameters.
Test#et$orkingDiagram
>A
Prere%uisites T+e ser'er "ors properly.
TestProcedure
#tart t+e #ystem Monitor client. T+en8 clic t+e Proess Monitor ta a3ter a success3ullogin.
C+oose Ad&inistration Settings 3rom t+e main menu. )n t+e Syste& Monitor
Settings dialog o98 'ie" t+e system monitoring parameters.
Clic t+e Server Monitor ta. T+en8 set t+e t+res+olds o3 t+e numer o3 continuous
C*U o'erloads8 re3res+ing inter'al o3 ser'er monitoring8 and ser'er monitoring
t+res+olds.Clic t+e /ard Disk Monitor ta. T+en8 set t+e re3res+ing inter'al o3 +ard dismonitoring and +ard dis monitoring t+res+olds.
Clic t+e Data)ase Monitor ta. T+en8 set t+e re3res+ing inter'al o3 dataase
monitoring and dataase space usage t+res+olds.
uery t+e in3ormation aout t+e ser'er8 process8 dataase8 and +ard dis and c+ec
"+et+er it is t+e same as t+e preset 'alues.
&'pectedesults
T+e in3ormation aout t+e system monitoring parameters is correctly displayed.
T+e in3ormation aout t+e ser'er8 process8 dataase8 and +ard dis is re3res+ed according
to t+e preset re3res+ing inter'als.
@+en t+e resource usage e9ceeds t+e t+res+old8 t+e corresponding resource records on
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
%%
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 35/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
t+e dataase in3ormation8 system resource in3ormation8 and +ard dis in3ormation tasare displayed in red.
@+en t+e occupancy o3 t+e C*U8 memory8 +ard dis8 or dataase e9ceeds t+e preset
t+res+old8 t+e corresponding alarm is reported to t+e U2000.
emarks >A
nternal#umer
T0-0102
T-6.1. %h"tting &own the 72::: %erer
O!ecti"e To test t+e 3unction o3 s+utting do"n t+e U2000 ser'er.
Test
#et$orkingDiagram
>A
Prere%uisites T+e ser'er "ors properly.
T+e system monitor process is running.
TestProcedure
#tart t+e #ystem Monitor client. #"itc+ to t+e Servie Monitor ta a3ter success3ul
login. T+en c+oose Ad&inistration Stop All Servies 3rom t+e main menu.
)n t+e Con#ir& dialog o98 clic +es.
&'pectedesults
All processes are stopped. On t+e Servie Monitor ta8 t+e status o3 all U2000 ser'er
processes is displayed as stopped.
emarks >A
nternal#umer
T0-010%
T-6.1.# %tarting the 72::: %erer
O!ecti"e To test t+e 3unction o3 starting t+e U2000 ser'er.
Test
#et$orkingDiagram
>A
Prere%uisites All ser'ice processes o3 t+e ser'er are ended.
T+e system monitor process is running.
TestProcedure
#tart t+e #ystem Monitor client. #"itc+ to t+e Servie Monitor ta a3ter success3ul
login. T+en c+oose Ad&inistration $ Start All Servies 3rom t+e main menu.
)n t+e Con#ir& dialog o98 clic ;es.
&'pectedesults
All processes8 e9cept 3or t+e processes "+ose startup mode is disaled8 are started. T+e
U2000 is started. On t+e Servie Monitor ta8 t+e running in3ormation o3 t+e U2000
ser'er processes is correctly displayed.
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
%,
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 36/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
emarks >A
nternal#umer
T0-010,
T-5.* ystem Management
T-6.2.1 %etting eso"rce 7sage Thresholds
O!ecti"e To test t+e 3unction o3 setting resource usage t+res+olds.
Test#et$orkingDiagram
>A
Prere%uisites T+e ser'er "ors properly.
T+e system monitor process is running.
TestProcedure
/og in to t+e #ystem Monitor client.
C+oose Ad&inistration Settings 3rom t+e main menu. )n t+e Syste& Monitor
Settings dialog o98 clic t+e Server Monitor8 /ard Disk Monitor8 Data)ase
Monitor8 and Servie Monitor tas.
#et t+e parameters correctly on t+e tas.
&'pectedesults
T+e t+res+olds are success3ully set "+en t+e entered t+res+olds are correct.
@+en t+e resource usage e9ceeds t+e t+res+old8 t+e corresponding resource records on
t+e dataase in3ormation8 system resource in3ormation8 and +ard dis in3ormation tasare displayed in red.
emarks >A
nternal#umer
T0-0201
T-5. Con6guration ,ile Management
T-6..1 (anaging Cong"ration 3iles in the 97IO!ecti"e To test t+e 3unction o3 managing con3iguration 3iles in t+e GU).
Test#et$orkingDiagram
one
Prere%uisites 1. T+e dataase ser'er 3unctions properly.
2. /og in to Network Manage&ent Syste& Maintenane Suite.
TestProcedure
1. C+oose Tools $ Con#ig Manager8 clic Filter8 set 3ilter criteria in t+e Set Filter
dialog o98 and clic (" .
2. (oule-clic a record in t+e list in t+e Con#ig Manager "indo".
)ssue 01 42015-02-2 6ua"ei *roprietary and Con3idential
Copyrig+t 7 6ua"ei Tec+nologies Co.8
/td.
%5
8/19/2019 0101-Common Domain Operation Guide
http://slidepdf.com/reader/full/0101-common-domain-operation-guide 37/37
iManager U2000
Acceptance Test Guide Common (omain Operation Guide 4!asic *acage
)n t+e Modi#y Con#ig Value dialog o98 c+ange Con#ig Value and clic (" .
&'pectedesults
1. T+e desired con3iguration items are displayed.
2. T+e con3iguration item is success3ully modi3ied.
emarks >A
nternal#umer
T0-0%01