7/27/2019 [012073]

1/6

References

1. R.E. Peterson, Stress Concentration Factors , John Wiley & Sons, New York, 1974.2. T.P. Gabb et al., Surface Enhancement of Metallic Materials, Adv. Mater. & Proc.,

160, 1, 2002, p. 69-72.3. K.P. Balan, A.Venugopal Reddy, Vydehi Joshi, and M. Sreenivas, Technical

Report: DMRL/MIG/97, 1997.4. Trilok Singh and A. Venugopal Reddy, Technical Report: DMRL/TR/8746,

1987.5. A. Venugopal Reddy, D.P. Lahiri and W. Krishnaswamy, Technical Report:

DMRL/MIG/82, 1982.6. A. Venugopal Reddy, K.P. Balan, P.G. Tekade, D. Pradeesh Kumar and N.B.

Jagtap, Technical Report: DMRL/MIG/14/94, 1994.7. K.P. Balan and A. Venugopal Reddy, Technical Report: DMRL/MIG/2/92, 1992.8. A. Venugopal Reddy, D.P. Lahiri and G.S. Sharma, Failure of Draw Hook of a

Railway Coach, Prakt. Met., 21, 1984, p. 148-152.9. K.P. Balan and A. Venugopal Reddy, Technical Report: DMRL/MIG/7/92, 1992.

10. A. Venugopal Reddy and D.P. Lahiri, Failure of Balancing Gear Rod of a GunCarriage, Trans. IIM, 38, 6, 1985, p. 531-532.

11. A. Venugopal Reddy and G. Krishna Murthy, Technical Report: DMRL/MIG/99, 1999.

12. H.H. Kolla and A. Venugopal Reddy, Technical Report: DMRL/MIG/3/99,1999.

13. K.P. Balan, A. Venugopal Reddy and D. Pradeesh Kumar, Technical Report:DMRL/SFAG/9/98, 1998.

14. A. Venugopal Reddy and P.G. Tekade, Technical Report: DMRL/MIG/14/93,1993.

15. K.P. Balan, Vydehi Joshi, B.V. Rao and A. Venugopal Reddy, Failure of HighPressure Turbine Blades of an Aeroengine, Prakt. Met., 30, 1993, p. 413-420.

16. A. Venugopal Reddy and K.P. Balan, Technical Report: DMRL/MIG/5/92,1992.

17. A. Venugopal Reddy and N.B. Jagtap, Technical Report: DMRL/MIG/5/91,1991.

18. A. Venugopal Reddy and D.P. Lahiri, Failure of Landing Gear of an Aircraft, Trans.IIM, 35, 1982, p. 99-102.

19. A. Venugopal Reddy and D.P. Lahiri, Spalling of Work Roll of Cold Rolling Mill,Prakt. Met., 21, 1984, p. 316-320.

20. A. Venugopal Reddy, Technical Report: DMRL/SFAG/8/97, 1997.21. A. Venugopal Reddy, Technical Report: DMRL/MIG/3/97, 1997.22. A. Venugopal Reddy, Delayed Cracking of Maraging Steel Billets, Prakt. Met., 21,

1984, p. 536-540.23. K.P. Balan and A. Venugopal Reddy, Technical Report: DMRL-TR-98227, 1998.24. P.G. Tekade and A. Venugopal Reddy, Technical Report: DMRL/MIG/9/95,

1995.25. A. Venugopal Reddy, Failure of High Pressure Turbine Blades of an Aeroengine,

Prakt. Met., 19, 1982, p. 659-663.

2004 by CRC Press LLC

7/27/2019 [012073]

2/6

7/27/2019 [012073]

3/6

7/27/2019 [012073]

4/6

8. An Atlas of Metal Damage: Lothar Engel and Hermann Klingele, Wolfe Pub-lishing Ltd., 1981.

9. Failure Analysis, Techniques and Applications: (Ed) J. Ivan Dickson, Proc. of

the First International Conf. on Failure Analysis, July 1991, Montreal, ASMInternational , 1992.10. Ductile Fracture of Metals:, P. F. Thomson, Pergamon, 1990.11. Fractography: (Ed) R. Koterazawa, Current Japanese Materials Research, Vol.

6, Elsevier, 1990.12. Strength and Fracture of Engineering Solids: D.K. Felbeck and A.G. Atkins,

Prentice-Hall, 1984.13. Failure of Materials in Mechanical Design Analysis, Prediction, Prevention:

J.A. Collins, Wiley-Interscience, New York, 1993.14. Fracture of Structural Materials: A.S. Tetelman and A.J. McEvily, John Wiley &

Sons, New York, 1967.15. Fractography: ASM Handbook, Vol. 12, ASM International , 1987.16. Failure Analysis and Prevention: ASM Handbook, Vol. 11, ASM International ,

1986.17. Principles of Heat Treatment, G. Krauss, ASM International, 1980.18. Microstructural Characterization of Materials, D.J. Brandon and W.D. Kaplan,

John Wiley & Sons, New York, 1999.19. Application of Fracture Mechanics for Selection of Metallic Structural Materials:

(Ed) J. E. Campbell et al., ASM International , 1982.20. Metallography in Failure Analyst: (Ed) J.L. Mc Call and P.M. French, ASM

International , 1977.21. Deformation and Fracture Mechanics of Engineering Materials: R.W.Hertzberg, John Wiley & Sons, 1976.

22. Mechanical Metallurgy: G.E. Dieter, Mc Graw-Hill, New York, 1986.23. Principles of Mechanical Metallurgy: Le May, Elsevier, Oxford, 1981.24. Deformation Mechanism Maps: H.J. Frost and M.F. Ashby, Pergamon, Oxford,

1982.

Residual Stress and Stress Concentration

1. Residual Stresses for Designers and Metallurgists: (Ed) C.J. Vande Walle, ASMInternational, 1981.

2. Residual Stresses and Fatigue of Metals: J.O. Almen and P.H. Slack, Mc Graw Hill , 1963.

3. Stress Concentration Factors: R.E. Peterson, John Wiley & Sons, 1974.4. Stress Intensity Factors Handbook: (Ed) Y. Murakami et al., Society of Materials

Science, Koyoto, Japan, 1987.

Wear1. Rolling Contact Phenomena: (Ed) J.B. Bidwel, Elsevier, 1962.2. Friction and Wear of Materials: (Ed) Rabinowicz, John Wiley & Sons, 1965.3. Friction, Lubrication and Wear Technology: ASM Handbook, Vol. 18, ASM

International, 1992.4. Erosion, Wear and Interfaces with Corrosion: STD 567, ASTM, 1974.

2004 by CRC Press LLC

7/27/2019 [012073]

5/6

5. Source Book on Wear Control Technology: (Ed) D.A. Rigney, ASM International,1981.

6. Wear of Metals: A.D. Sarkar, Pergamon, 1976.

7. Friction, Wear and Lubrication: K.C. Ludema, CRC Press, 1996.8. Materials to Resist Wear: A.R. Lansdown and A.L. Price, Pergamon, 1986.9. Fundamentals of Friction and Wear of Materials: (Ed) D. A. Rigney, ASM

International , 1981.10. Source Book on Wear Control Technology: (Ed) D.A. Rigney and W.A. Glaeser,

ASM International , Metals Park, 1978.

2004 by CRC Press LLC

7/27/2019 [012073]

6/6