02 valve and manifolds - spir star valve and manifolds.pdf · page 2 rev. 0 rev. 0 ----...

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Worldwide

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Needle Valve

1 TEE BAR AISI 304

2 FIXING AISI 303

3 CAP HYTREL

4 GLAND NUT AISI 316L

5 LOCK NUT AISI 316L

6 BONNET AISI 316L

7 RING AISI 316L

8 METAL SEAL AISI 316L

9 PACKING (STEM) PTFE / GRAPHOIL

10 STEM AISI 316L

11 PIN AISI 304

MATERIALS TABLEMATERIALS TABLEMATERIALS TABLEMATERIALS TABLE

12 NON-ROTATING STEM AISI 316L

NonNonNonNon----rotating Metal Stem Tiprotating Metal Stem Tiprotating Metal Stem Tiprotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling of the valve seat in contact with the non-rotating stem, which is driven straight into it without rotating. • Tee bar easy manoeuvrability with minimum

effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard,

optional: carbon steel LF2, Duplex, Super Duplex, Monel 400, Hastelloy C276, Inconel 625, Titanium, Incolloy 825

• Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the

operating thread

2222

3333

4444

5555

6666

7777

8888

9999

1111

11111111

10101010

12121212

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Needle Valve

Anti-Tamper

Anti-Tamper Locking

Locking and AntiLocking and AntiLocking and AntiLocking and Anti----TamperTamperTamperTamper A wide range of locking devices is available on our products

The antitamper handle reduces the risk of human error and deliberate tampering. The valve can be operated with the antitamper key, sold separately.

Lockable Anti Tamper The Anti-Tamper accommodates shackles of diameter 0.25 in. ( 6 .4 mm ) or smaller and can lock.

**** PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.

****

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Stem Packing MaterialStem Packing MaterialStem Packing MaterialStem Packing Material Valve MaterialValve MaterialValve MaterialValve Material Temperature rating Temperature rating Temperature rating Temperature rating

( ° C )( ° C )( ° C )( ° C ) ( ° F )( ° F )( ° F )( ° F ) psipsipsipsi barbarbarbar

Standard PTFEStandard PTFEStandard PTFEStandard PTFE SS 316L -73°C / +210°C -99°F / +410°F 6.000 413

Standard PEEKStandard PEEKStandard PEEKStandard PEEK SS 316L -40°C / +260°C -40°F / +500°F 6.000 413

Standard GraphoilStandard GraphoilStandard GraphoilStandard Graphoil SS 316L -54°C / +510° -65°F / +950°F 6.000 413

Note: Pressure at the maximum temperature information is based on ASME B16 codeNote: Pressure at the maximum temperature information is based on ASME B16 codeNote: Pressure at the maximum temperature information is based on ASME B16 codeNote: Pressure at the maximum temperature information is based on ASME B16 code

Maximum Standard PressureMaximum Standard PressureMaximum Standard PressureMaximum Standard Pressure

Material groups, Class Ratings, and Temperatures are based on ASME codes. Valves with optional packing may affect the valve rMaterial groups, Class Ratings, and Temperatures are based on ASME codes. Valves with optional packing may affect the valve rMaterial groups, Class Ratings, and Temperatures are based on ASME codes. Valves with optional packing may affect the valve rMaterial groups, Class Ratings, and Temperatures are based on ASME codes. Valves with optional packing may affect the valve ratiatiatiating ng ng ng depending on the valve materialdepending on the valve materialdepending on the valve materialdepending on the valve material

FeaturesFeaturesFeaturesFeatures • Alternative 10.000 psi ( 689 bar ) range available. • All Valves 100% factory tested. • NACE MR01-75 certified wetted parts available. • Optional cleaning and lubrication suitable for Oxygen service. • Heat code traceable body and bonnet

A complete pressure/temperature chart of the most common packing material is available on section 6 ( T echnical ) of our catalogue.

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Sami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with union----bonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connections.ections.ections.ections. Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar ) Temperature rating PTFE packing from Temperature rating PTFE packing from Temperature rating PTFE packing from Temperature rating PTFE packing from ––––73°C to + 210°C (73°C to + 210°C (73°C to + 210°C (73°C to + 210°C ( ----99°F / + 410°F )99°F / + 410°F )99°F / + 410°F )99°F / + 410°F ) Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from ––––54°C to + 510° C (54°C to + 510° C (54°C to + 510° C (54°C to + 510° C ( ----65°F / + 950°F )65°F / + 950°F )65°F / + 950°F )65°F / + 950°F )

Ordering Information Ordering Information Ordering Information Ordering Information

1000÷16001000÷16001000÷16001000÷1600 Bar stock needle valvesBar stock needle valvesBar stock needle valvesBar stock needle valves

2000÷24502000÷24502000÷24502000÷2450 TwoTwoTwoTwo----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds

3000÷35503000÷35503000÷35503000÷3550 ThreeThreeThreeThree----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds

4000÷43004000÷43004000÷43004000÷4300 FourFourFourFour----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds

5000÷56005000÷56005000÷56005000÷5600 FiveFiveFiveFive----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds

VERSIONVERSIONVERSIONVERSION

OUTLETOUTLETOUTLETOUTLET B B B B 1/4” AAAA NPT

CCCC 3/8” BBBB BSPP

DDDD 1/2” CCCC BSPT

EEEE 3/4” DDDD S.W.

FFFF Ø * EEEE B.W.

GGGG 1” FFFF O.D.

HHHH Flanged HHHH Flanged IEC 61518/B

IIII M20 IIII Flanged IEC 61518/A

LLLL Coplanar

NNNN X 1,5

VERSIONVERSIONVERSIONVERSION RATINGRATINGRATINGRATING INLETINLETINLETINLET OUTLETOUTLETOUTLETOUTLET MATERIALMATERIALMATERIALMATERIAL PACKINGPACKINGPACKINGPACKING BONNETBONNETBONNETBONNET OPTIONSOPTIONSOPTIONSOPTIONS

CCCC BBBB AAAA BBBB AAAA BBBB AAAA AAAA AAAA 1 0 0 01 0 0 01 0 0 01 0 0 0

INLETINLETINLETINLET B B B B 1/4” AAAA NPT

CCCC 3/8” BBBB BSPP

DDDD 1/2” CCCC BSPT

EEEE 3/4” DDDD S.W.

GGGG 1” EEEE B.W.

HHHH Flanged HHHH Flanged IEC 61518/B

IIII M20 IIII Flanged IEC 61518/A

LLLL Coplanar

NNNN X 1,5

RATINGRATINGRATINGRATING

BBBB 3,000 PSI

CCCC 6,000 PSI

DDDD 10,000 PSI

MATERIALMATERIALMATERIALMATERIAL

BBBB Aisi 316 L

CCCC Aisi 316 Ti

DDDD Duplex F51

EEEE Super Duplex F55

FFFF Monel 400

GGGG Hastelloy C276

HHHH Inconel 625

IIII Titanium

MMMM Brass

NNNN A350-LF2

OOOO Incolloy 825

RRRR F44

SSSS Aisi 321

TTTT Aisi 317

BONNETBONNETBONNETBONNET

AAAA Std Bonnet

BBBB Gas Solution

CCCC Mini

EEEE Extended Bonnet

PACKINGPACKINGPACKINGPACKING

AAAA PTFE

BBBB Graphoil

OPTIONSOPTIONSOPTIONSOPTIONS

AAAA Drain/vent 1/2” HHHH Drain+Equalise Anti-tamper

BBBB Drain/vent M10 IIII All Anti-tamper

CCCC Drain/vent M20x1,5 LLLL Loxcleaning

DDDD Drain/vent Anti-tamper PPPP Panel Mounting

EEEE Equalise+Drain Anti-tamper QQQQ All locking device

FFFF Isolate+Drain Anti-tamper RRRR Isolate Anti-tamper

GGGG Isolate+Equalise Anti-tamper SSSS Drain Male

TTTT Drain Female

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections

AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet

1000CBABABAA1000CBABABAA1000CBABABAA1000CBABABAA 1/4 ” 1/4 ” 30.00 60.00 89.00 4.00 Kg. 0,48

1000CCACABAA1000CCACABAA1000CCACABAA1000CCACABAA 3/8 ” 3/8 ” 30.00 60.00 89.00 4.00 Kg. 0.48

1000CDADABAA1000CDADABAA1000CDADABAA1000CDADABAA 1/2 ” 1/2 ” 30.00 60.00 89.00 4.00 Kg. 0.48

1000CEAEABAA1000CEAEABAA1000CEAEABAA1000CEAEABAA 3/4 ” 3/4 ” 40.00 65.00 99.00 4.00 Kg. 0.70

1000CGAGABAA1000CGAGABAA1000CGAGABAA1000CGAGABAA 1 ” 1 ” 50.00 75.00 109.00 6,50 Kg. 1.10

Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1000Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1000Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1000Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1000DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575

1000 Series

Features

• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating

thread

Specifications

• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°

C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel

Needle Valves 6,000 psi & 10,000 psi

Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.

FLOWFLOWFLOWFLOW

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

1050 Series









Features


thread



FLOWFLOWFLOWFLOW

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Specifications











1100 Series

Features


thread



FLOWFLOWFLOWFLOW

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012







1150 Series

Features


thread



FLOWFLOWFLOWFLOW

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

1200 Series

Features


thread



FLOWFLOWFLOWFLOW







Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012







1250 Series

Features


thread



FLOWFLOWFLOWFLOW

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

1300 Series


AAAA B B B B C C C C DDDD WeightWeightWeightWeight Inlet / OutletInlet / OutletInlet / OutletInlet / Outlet

1300CBABABAA1300CBABABAA1300CBABABAA1300CBABABAA 1/4 ” NPT MALE INLET

3 x 1/4 ” NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0,82

1300CDADABAA1300CDADABAA1300CDADABAA1300CDADABAA 1/2 ” NPT MALE INLET

3 x 1/2 ” NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0.82

1300CEAEABAA1300CEAEABAA1300CEAEABAA1300CEAEABAA 3/4 ” NPT MALE INLET


Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1300the code, i.e. 1300the code, i.e. 1300the code, i.e. 1300DDDDBABABAABABABAABABABAABABABAA

Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug ---- BleederBleederBleederBleeder

Features


thread

Multiport Gauge Valves

This needle valve is equipped with three threaded female outlets that allow to fix the gauge in the most appropriate position or to install even a master gauge at the same time. Complete with standard PTFE gland packing and self centering non-rotating stem which gives the user assurance of bubble tight seat shut off. Both 1/2 ” and 3/4 ” have 1/2 ” side ports. Compact 1/4 ” all around version is available as well as other options such as locking devices.

FLOWFLOWFLOWFLOW

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


AAAA B B B B C C C C DDDD WeightWeightWeightWeight Inlet / OutletInlet / OutletInlet / OutletInlet / Outlet

1304CBABABAA1304CBABABAA1304CBABABAA1304CBABABAA 1/4 ” NPT FEMALE INLET

3 x 1/4 ” NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0,82

1304CDADABAA1304CDADABAA1304CDADABAA1304CDADABAA 1/2 ” NPT FEMALE INLET



Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug ---- BleederBleederBleederBleeder

OrificeOrificeOrificeOrifice

4.00

4.00

1304 Series

Features


thread

FLOWFLOWFLOWFLOW

Specifications



Multiport Gauge Valves

This needle valve is equipped with three threaded female outlets that allow to fix the gauge in the most appropriate position or to install even a master gauge at the same time. Complete with standard PTFE gland packing and self centering non-rotating stem which gives the user assurance of bubble tight seat shut off. Both 1/2 ” and 3/4 ” have 1/2 ” side ports. Compact 1/4 ” all around version is available as well as other options such as locking devices.

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012







1400 Series

Features


thread



FLOWFLOWFLOWFLOW

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

1450 Series

Features


thread



FLOWFLOWFLOWFLOW







Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012







DDDD

99.00

99.00

99.00

1550 Series

Features


thread

Needle Valves 6,000 psi & 10,000 psi / 90°


FLOWFLOWFLOWFLOW

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

1600 Series







DDDD

109.00

109.00

109.00

Features


thread

Needle Valves 6,000 psi & 10,000 psi / 90°


FLOWFLOWFLOWFLOW

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet

2000CBABABAA2000CBABABAA2000CBABABAA2000CBABABAA 1/4 ” 30.00 120.00 89.00 4.00 Kg. 0,87

2000CDADABAA2000CDADABAA2000CDADABAA2000CDADABAA 1/2 ” 30.00 120.00 89.00 4.00 Kg. 0.87


Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug

1/4 ”

1/2 ”

OutletOutletOutletOutlet DDDD

89.00

89.00

2000 Series

Features


thread

Two Valve Manifolds

6.000 psi & 10.000

This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.

FLOWFLOWFLOWFLOW

TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

2002 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS


AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet OutletOutletOutletOutlet

2002CDADABAAA2002CDADABAAA2002CDADABAAA2002CDADABAAA 1/2 ” 1/2 ” 30.00 120.00 148.00 4.00 Kg. 0.88

Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2002code, i.e. 2002code, i.e. 2002code, i.e. 2002DDDDDADABAADADABAADADABAADADABAA Material of construction can be supplied to meet the Material of construction can be supplied to meet the Material of construction can be supplied to meet the Material of construction can be supplied to meet the requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01----75757575


Features


thread

Two Valve Manifolds

6.000 psi & 10.000


FLOWFLOWFLOWFLOW

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012






Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2003200320032003DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75


Features


thread

FLOWFLOWFLOWFLOW

Specifications



E

F

Two Valve Manifolds

6.000 psi & 10.000


Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


AAAA B B B B C C C C DDDD Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet

2050CBABABAA2050CBABABAA2050CBABABAA2050CBABABAA 1/4 ” 1/4 ” 30.00 60.00 50.00 168.00 4.00 Kg. 0,90

2050CDADABAA2050CDADABAA2050CDADABAA2050CDADABAA 1/2 ” 1/2 ” 30.00 60.00 50.00 168.0 4.00 Kg. 0.90


EEEE FFFF

35.00 35.00

35.00 35.00

Features


thread

FLOWFLOWFLOWFLOW

Specifications



E

F

Two Valve Manifolds 6.000 psi & 10.000



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012



AAAA B B B B C C C C FFFF Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet

2052CBABABAA2052CBABABAA2052CBABABAA2052CBABABAA 1/4 ” 1/4 ” 30.00 65.00 50.00 22.00 4.00 Kg. 0,81

2052CDADABAA2052CDADABAA2052CDADABAA2052CDADABAA 1/2 ” 1/2 ” 30.00 65.00 50.00 22.00 4.00 Kg. 0,81

Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2052Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2052Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2052Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2052DDDDBABABAA Included accessories:BABABAA Included accessories:BABABAA Included accessories:BABABAA Included accessories: Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet ---- PluPluPluPlugggg the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575

GGGG HHHH

30.00

27.00

30.00

27.00

LLLL MMMM

103.00 89.00

103.00 89.00

IIII

30.00

30.00

Features


thread

FLOWFLOWFLOWFLOW

Specifications



E

F



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet OutletOutletOutletOutlet


Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2055code, i.e. 2055code, i.e. 2055code, i.e. 2055DDDDDADABAADADABAADADABAADADABAA Material of construction can be supplied to meet theMaterial of construction can be supplied to meet theMaterial of construction can be supplied to meet theMaterial of construction can be supplied to meet the requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01----75757575


Features


thread

Two Valve Manifolds

6.000 psi & 10.000


FLOWFLOWFLOWFLOW

Specifications




Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW



Specifications




AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight

Inlet Inlet Inlet Inlet OutletOutletOutletOutlet

2150CBAHHBAA2150CBAHHBAA2150CBAHHBAA2150CBAHHBAA 1/4 ” Flanged 32.00 65.00 70.00 49.00 32.00 18.00 7.00 124.00 124.00 4.00 Kg. 1.35

2150CDAHHBAA2150CDAHHBAA2150CDAHHBAA2150CDAHHBAA 1/2 ” Flanged 32.00 65.00 70.00 49.00 32.00 18.00 7.00 124.00 124.00 4.00 Kg. 1.35

Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2150215021502150DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75




Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


Features


thread

Specifications








Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2151215121512151DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75

Included accessories:Included accessories:Included accessories:Included accessories: • PlugPlugPlugPlug • Gasket no. 1Gasket no. 1Gasket no. 1Gasket no. 1 • Screw CS no. 2Screw CS no. 2Screw CS no. 2Screw CS no. 2



FLOWFLOWFLOWFLOW

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


Notes

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW


Two Valve Manifolds 6.000 psi & 10.000 psi / 90°

This series of two-valve manifolds combines valves into one block to perform isolation, bleed ad calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded .


AAAA B B B B C C C C DDDD EEEE Orifice Orifice Orifice Orifice WeightWeightWeightWeight


2250CBABABAA2250CBABABAA2250CBABABAA2250CBABABAA 1/4 ” 1/4 ” 30.00 60.00 50.00 109.00 119.00 4.00 Kg. 1.35

2250CDADABAA2250CDADABAA2250CDADABAA2250CDADABAA 1/2 ” 1/2 ” 30.00 60.00 50.00 109.00 119.00 4.00 Kg. 1.35

Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2250i.e. 2250i.e. 2250i.e. 2250DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75

Included accessories:Included accessories:Included accessories:Included accessories: ---- Plug Plug Plug Plug

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Specifications



Features


thread

FLOWFLOWFLOWFLOW



AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet

2350CBAHHBAA2350CBAHHBAA2350CBAHHBAA2350CBAHHBAA 1/4 ” Flanged 32.00 70.00 65.00 27.00 12.00 30.00 18.00 172.00 4.00 Kg. 1.28

2350CDAHHBAA2350CDAHHBAA2350CDAHHBAA2350CDAHHBAA 1/2 ” Flanged 32.00 70.00 65.00 27.00 12.00 30.00 18.00 172.00 4.00 Kg. 1.28

Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2350Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2350Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2350Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2350DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575


Two Valve Manifolds 6.000 psi & 10.000 psi / 90°


Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012



2450CBABABAA2450CBABABAA2450CBABABAA2450CBABABAA 1/4 ” 1/4 ” 70.00 109.00 112.00 4.00 Kg. 1.28



Features


thread

FLOWFLOWFLOWFLOW


Specifications




Two Valve Manifolds 6.000 psi & 10.000 psi / Forged


Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW

3000 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS

Three Valve Manifolds 6.000

psi & 10.000 psi

The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.


AAAA B B B B C C C C DDDD EEEE----FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet

3000CBABABAA3000CBABABAA3000CBABABAA3000CBABABAA 1/4 ” 1/4 ” 30.00 104.00 50.00 217.00 54.00 22.00 4.00 Kg. 1.75

Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories: i.e. 3000i.e. 3000i.e. 3000i.e. 3000DDDDBABABAA BABABAA BABABAA BABABAA ---- PlugsPlugsPlugsPlugs Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575

GG GG

EE EE

CC CC

FF FF

AA AA

DD DD

BB BB

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


Features


thread

FLOWFLOWFLOWFLOW

Three Valve Manifolds 6.000

psi & 10.000 psi



AAAA B B B B C C C C DDDD E E E E ---- FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet

3001CDADABAA3001CDADABAA3001CDADABAA3001CDADABAA 1/2 ” 1/2 ” 30.00 110.00 50.00 223.00 54.00 40.00 4.00 Kg. 1.45

Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories: i.e. 3001i.e. 3001i.e. 3001i.e. 3001DDDDDADABAA No. 2 PlugsDADABAA No. 2 PlugsDADABAA No. 2 PlugsDADABAA No. 2 Plugs Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575

Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


Features


thread

FLOWFLOWFLOWFLOW






LLLL

214.00

214.00

Specifications



Three Valve Manifolds 6.000 psi & 10.000 psi


Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Notes

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW



AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet

3100CBABABAA3100CBABABAA3100CBABABAA3100CBABABAA 1/4 ” 1/4 ” 30.00 104.00 50.00 54.00 54.00 74.00 22.0 16.00 217.00 4.00 Kg. 2.03


Specifications






Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW







LLLL

224.00

224.00

MMMM

124

124




Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW



AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet




Three Valve Manifolds 6.000 psi &

10.000 psi


Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW

3450 Series



3450CHHHHBAA3450CHHHHBAA3450CHHHHBAA3450CHHHHBAA Flanged Flanged 101.00 54.00 216.00 4.00 Kg. 2.50

Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3450DDDDHHHHBAAHHHHBAAHHHHBAAHHHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575

DDDD

82.00

Three Valve Manifolds 6.000 psi & 10.000 psi / Forged


Specifications



Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs

THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread


Specifications






3451CDAHHBAA3451CDAHHBAA3451CDAHHBAA3451CDAHHBAA 1/2 ” Flanged 94.00 54.00 212.00 4.00 Kg. 2.40


DDDD

86.00

3451CBAHHBAA3451CBAHHBAA3451CBAHHBAA3451CBAHHBAA 1/4 ” Flanged 94.00 54.00 212.00 86.00 4.00 Kg. 2.40

Three Valve Manifolds 6.000 psi & 10.000 psi / Forged


Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW

3452 Series Three Valve Manifolds 6.000 psi & 10.000 psi / Forged

The three Valve manifolds are used with differential pressure trasmitters. In a single block the functions of interception and balancing are gathered. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.

Specifications







3452CDAHHBAA3452CDAHHBAA3452CDAHHBAA3452CDAHHBAA 1/2 ” Flanged 94.00 54.00 212.00 4.00 Kg. 2.40


DDDD

73.00

3452CBAHHBAA3452CBAHHBAA3452CBAHHBAA3452CBAHHBAA 1/4 ” Flanged 94.00 54.00 212.00 73.00 4.00 Kg. 2.40

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW



Three Valve Manifolds 6.000 psi & 10.000 psi / Coplanar


Specifications




AAAA B B B B C C C C DDDD EEEE FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight


3550CBAHLBAA3550CBAHLBAA3550CBAHLBAA3550CBAHLBAA 1/4 ” Coplanar 130.00 70.00 54.00 41.30 85.00 129.00 235.00 4.00 Kg. 2.45

3550CDAHLBAA3550CDAHLBAA3550CDAHLBAA3550CDAHLBAA 1/2 ” Coplanar 130.00 70.00 54.00 41.30 85.00 129.00 235.00 4.00 Kg. 2.45

Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3550355035503550DDDDBAHLBAABAHLBAABAHLBAABAHLBAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75


Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012


Features


thread

FLOWFLOWFLOWFLOW

5000 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS

Five Valve Manifolds 6.000 psi & 10.000 psi

The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.

EEEE

LLLL

IIII HHHH GGGG FFFF

CCCC

AAAA

BBBB

FFFF

Specifications






5000CBABABAA5000CBABABAA5000CBABABAA5000CBABABAA 1/4 ” 1/4 ” 32.00 70.00 142.00 129.00 260.00 110.00 75.00 4.00 Kg. 2.80

5000CDADABAA5000CDADABAA5000CDADABAA5000CDADABAA 1/2 ” 1/2 ” 32.00 70.00 142.00 129.00 260.00 110.00 75.00 4.00 Kg. 2.80

Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5000i.e. 5000i.e. 5000i.e. 5000DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75


HHHH IIII LLLL MMMM

54.00 30.00 20.00 41.00

54.00 30.00 20.00 41.00

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW


Five Valve Manifolds 6.000 psi & 10.000 psi The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.

LLLL MMMM

DDDD

GGGG

IIII

HHHH

FFFF

EEEE

BBBB

CCCC

AAAA

Specifications






5050CBAHHBAA5050CBAHHBAA5050CBAHHBAA5050CBAHHBAA 1/4 ” Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.00 4.00 Kg. 2.80

5050CDAHHBAA5050CDAHHBAA5050CDAHHBAA5050CDAHHBAA 1/2 ” Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.00 4.00 Kg. 2.80

Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5050i.e. 5050i.e. 5050i.e. 5050DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75


HHHH IIII LLLL MMMM

124.00 260.00 10.50 16.00

124.00 260.00 10.50 16.00

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Notes

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

FLOWFLOWFLOWFLOW


Five Valve Manifolds 6.000 psi & 10.000 psi / 90° The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.




5150CBAHIBAA5150CBAHIBAA5150CBAHIBAA5150CBAHIBAA 1/4 ” Flanged 32.00 148.00 90.00 54.00 41.40 40.00 91.0 118.00 258.00 4.00 Kg. 2.70

5150CDAHIBAA5150CDAHIBAA5150CDAHIBAA5150CDAHIBAA 1/2 ” Flanged 32.00 148.00 90.00 54.00 41.40 40.00 91.0 118.00 258.00 4.00 Kg. 2.70

Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5150515051505150DDDDBAHIBAABAHIBAABAHIBAABAHIBAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75


Specifications



Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

Specifications



FLOWFLOWFLOWFLOW







LLLL

260.00

260.00

Five Valve Manifolds 6.000 psi & 10.000 psi

The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Features


thread

Five Valve Manifolds 6,000 psi & 10,000 psi The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.

FLOWFLOWFLOWFLOW


Specifications




AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight




Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5600560056005600DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75


Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Special Items

15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed

DistributorsDistributorsDistributorsDistributors

DBBDBBDBBDBB Safety systemsSafety systemsSafety systemsSafety systems

Distribution and control panelDistribution and control panelDistribution and control panelDistribution and control panel

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Special Items

Socket Weld VersionSocket Weld VersionSocket Weld VersionSocket Weld Version

DistributorsDistributorsDistributorsDistributors

Flanged ValvesFlanged ValvesFlanged ValvesFlanged Valves O.S.&.Y. Needle ValvesO.S.&.Y. Needle ValvesO.S.&.Y. Needle ValvesO.S.&.Y. Needle Valves

Flanged/Flanged Needle ValvesFlanged/Flanged Needle ValvesFlanged/Flanged Needle ValvesFlanged/Flanged Needle Valves

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Brackets

Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540/11Model: A0540/11Model: A0540/11Model: A0540/11

Three Valve ManifoldsThree Valve ManifoldsThree Valve ManifoldsThree Valve Manifolds Model: A0540/04Model: A0540/04Model: A0540/04Model: A0540/04






Five Valve ManifoldsFive Valve ManifoldsFive Valve ManifoldsFive Valve Manifolds Model: A0540/04Model: A0540/04Model: A0540/04Model: A0540/04

Five Valve ManifoldsFive Valve ManifoldsFive Valve ManifoldsFive Valve Manifolds Model: A0540/04Model: A0540/04Model: A0540/04Model: A0540/04

Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012

Notes

02 valve and manifolds - spir star valve and manifolds.pdf · page 2 rev. 0 rev. 0 ----...

Documents