03| pneumatic solenoid valve - zm technik€¦ · pneumatic & hydraulic solenoid valve...
TRANSCRIPT
Pneumatic Solenoid Valve03|
5 Port Pilot, 1/4 / KA(B)V320 [3] - 76
5 Port Pilot, 3/8 / KA(B)V530 [3] - 78
5 Port Pilot, 1/2 / KA(B)V640 [3] - 80
5 Port Pilot, 1/4 / KA(B)V524 [3] - 83
5 Port Pilot, 1/4 / KA(B)V534 [3] - 85
3 Port Pilot, 1/8 / KA(B)V341 [3] - 87
3 Port Pilot, 1/4 / KA(B)V342 [3] - 89
3 Port Poppet, 1/4, 3/8 / KPA(B)542 [3] - 91
3 Port Pilot, 3/8, 1/2 / KSA3135 [3] - 93
5 Port Pilot, 3/8, 1/2 / KSA4000 [3] - 95
3 Port Poppet, 1/8, 1/4 / KTA307 [3] - 97
3 Port Poppet, 1/4, 3/8 / KTA317 [3] - 100
3. Logic Valve 1/8, 1/4 / KOR/KAND [3] - 102
4. Check Valve 1/8 ~ 1 / KACV [3] - 104
5. Mechanical Valve
2,3 Port, 1/8 / KVM100 [3] - 106
2,3 Port, 1/4 / KVM200 [3] - 110
3 Port, 1/4 / KVMS230 [3] - 114
5 Port, 1/4 / KVM350 [3] - 118
3,5 Port, M5 / K [3] - 122
6. Hand Valve
5 Port, 1/8, 1/4 / KHP320 [3] - 125
3 Port, 1/8, 1/4 / KHP342 [3] - 128
5 Port, 1/8, 1/4 / KHV320 [3] - 131
5 Port, 3/8 / KHV530 [3] - 134
4 Port, 1/4, 3/8, 1/2, 3/4 / KHV [3] - 137
7. Foot Valve 2, 3, 5 Port, 1/4, 3/8 / SFVM [3] - 139
8. Quick Exhaust Valve
1/8, 1/4 / KQE2000 [3] - 141
1/4, 3/8, 1/2 / SQE [3] - 143
9. Residual Pressure Exhaust Valve 1/8~1 / KVHS [3] - 144
Reference Data [3] - 2
1. Solenoid Valve
3 Port Direct Acting, M5 / KT100(Manifold Block / KMF0100)
[3] - 8
5 Port Pilot, M5 / KS105(Manifold Block / KMF0500)
[3] - 11
5 Port Pilot, 1/8 / KS210(Manifold Block / KMF1000)
[3] - 14
5 Port Pilot, 1/4 / KS320(Manifold Block / KMF2000)
[3] - 17
5 Port Pilot, 3/8 / KS530(Manifold Block / KMF3000)
[3] - 20
5 Port Pilot, 1/2 / KS640(Manifold Block / KMF4000)
[3] - 24
5 Port Pilot, 1/4, Namur / KS524 [3] - 28
5 Port Pilot, 1/4, Namur / KS534 [3] - 30
5 Port Pilot, 1/4, 3/8 / KS328 [3] - 32
5 Port Pilot, 3/4, 1/2 / KS760 [3] - 36
3 Port Pilot, 1/8 / KS341(Manifold Block / KMF2341)
[3] - 40
3 Port Pilot, 1/4 / KS342(Manifold Block / KMF2342)
[3] - 43
3 Port Poppet, 1/4, 3/8 / KPS542 [3] - 46
2,3 Port Direct Acting, M5,1/4,Ø4,Ø6/ KCAS [3] - 48
2,3 Port Direct Acting, M5, 1/8 / KJAS [3] - 50
2,3 Port Direct Acting, 1/8 / KST [3] - 52
3 Port Direct Acting, 3/8, 1/2 / KS3135 [3] - 55
5 Port Direct Acting, 3/8, 1/2 / KS4000 [3] - 57
3 Port Direct Acting, 3/8, 1/2 / KSP3135 [3] - 59
5 Port Direct Acting, 3/8, 1/2 / KSP4000 [3] - 61
3 Port Poppet, 1/8, 1/4 / KT307(Manifold Block / KMF307)
[3] - 64
3 Port Poppet, 1/4, 3/8 / KT317 [3] - 69
2. Air Operated Valve
5 Port Pilot, M5 / KA(B)V105 [3] - 72
5 Port Pilot, 1/8 / KA(B)V210 [3] - 74
KCC Co., Ltd.
www.kccpr.com23 -
PNEUMATIC & HYDRAULIC Solenoid Valve
Safety instructions
Reference Data
These safety instructions are intended to prevent a hazardous situation or equipment damage. These instructuions indicate the level of potential hazard by a label of Caution, Warning and Danger. To ensure safety, be sure to observe ISO 4414, KS B 6376 and etc.
Caution Operating error could result in injury or equipment damage
Warning Operating error could result in serious injury or loss life
Dangerous In extreme conditions, it could result in serious injury or loss life
1) ISO 4414 : Pneumatic Fluid Power-Recommendations for the application of equipment to transmission and control systems.
2) KS B 6376
Warning
WWW
Fluid
Warning 1. Use clean air.
Do not use compressed air that contains chemicals, synthetic oils including organic solvents, salt or corrosive gases, etc., as it can cause damage or malfunction.
Caution1. Install an air lter upstream near the valve. Select an air lter with a ltration size of 5 m or smaller.2. When extremely dry air is used as the uid, degradation of the lubrication properties inside the equipment may occur, resulting in reduced reliability (or reduced service life) of the equipment.3. If excessive carbon dust is generated by the compressor, it may adhere to the inside of a valve and cause it to malfunction.
Pneumatic system design and device speci cations selection should be done by the person with professional knowledge.
Person who designs and decides the devices speci cations is responsible for system performance and security.
Only trainned person is allowed to operate pneumatic devices.
Improper handling of high-pressure compressed air is dangerous. Only person with professional knowledge is allowed to assembly, operate and maintain the pneumatic system.
Do not remove components until safety is con rmed.1) Inspection and maintenance of machine and equipment should only be performed after the con rmation of safe locked-out control positions.2) Make sure the safety procedure is carried out before disassembly the pneumatic devices. Cut off the supply pressure of the equipment and release the residual compressed air in the system.3) When restart the system, be aware workpeace own out cause injury.
Consult KCC for the following operating environment.1) Any environments beyond the given speci cations, or when it is used outdoor.2) Devices for food and beverages, medical equipment, vehicles, nuclear energy, railway, brake equipment or safety equipment.3) Any application required safety.
KCC Co., Ltd.
www.kccpr.com 33 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
Solenoid ValveReference Data
Operating Environment
Warning 1. Do not use in an atmosphere having corrosive gases, chemicals, sea water, water, water steam, or where there is direct contact with any of these.2. Do not use in an environment where ammable gas or explosive gas exists.3. Do not use in a place subject to heavy vibration and/or shock.4. The valve should not be exposed to prolonged sunlight. Use a protective cover.5. Remove any sources of excessive heat.6. If it is used in an environment where there is possible contact with oil, weld spatter, etc., exercise preventive measures.7. Attach a silencer at the exhaust port of valve to prevent dust get into valve.
Lubrication
Caution1. Valve have been lubricated for life by the manufacturer and therefore, do not require lubrication while in service.2. If a lubricant is used in the system, use class 1 turbine oil (no additive), ISO VG32. Once a lubricant is used in the system, lubrication must be continued because the original lubricant applied during manufacturing will be washed away.
Design
Warning1. Actuator drive
When an actuator, such as a cylinder, is to be driven using a valve, take appropriate measures (cover installation approach prohibition) to prevent potential danger caused by actuator operation.
2. Intermediate stopsFor 3-position closed center or double check valve type, it is dif cult to make a piston stop at the required position accurately due to the compressibility of air. Furthermore, since valves and cylinders are not guaranteed for zero air leakage, it may not be possible to hold a stopped position for an extended period of time. Please contact KCC if it is necessary to hold a stopped position for an extended period of time.
3. Effect of back pressure when using a manifoldUse caution when valves are used on a manifold, because an actuator may malfunction due to back-pressure.For 3-position exhaust center valve or single acting cylinder, take appropriate measures to prevent malfunction by using it with an individual EXH spacer assembly, a back pressure check valve or an individual exhaust manifold.
4. Since the valves are subject to air leakage, they cannot be used for applications such as holding pressure (including vacuum)in a pressure vessel.
5. The valves listed in this catalogue are not designed for safety applications such as an emergency shutoff valve. If the valves are used for the mentioned applications, additional safety measures should be adopted.
6. Release of residual pressureFor maintenance purposes install a system for releasing residual pressure. Especially in the case of 3-position closed center valve or double check valve type, ensure that the residual pressure between the valve and the cylinder is released.
7. Operation in a vacuum conditionWhen a valve is used for switching a vacuum, take measures to install a suction lter or similar to prevent external dust or other foreign matter from entering inside the valve. In addition, at the time of vacuum adsorption, be sure to vacuum at all times. Failure to do so may result in foreign matter sticking to the adsorption pad, or air leakage causing the workpiece to drop.
8. Double solenoid typeWhen using the double solenoid type for the rst time, actuators may travel in an unexpected direction depending on the switching position of the valve. Implement measures to prevent any danger from occurring when operating the actuator.
9. Provide ventilation when using a valve in a con ned area, such as in a closed control panel. For example, install a ventilation opening, etc.
10. Please allow suf cient space for maintenance.
KCC Co., Ltd.
www.kccpr.com43 -
PNEUMATIC & HYDRAULIC
Selection
Warning 1. Con rm the speci cations.
Do not operate at pressures or temperatures, etc., beyond the range of speci cations, as this can cause damage or malfunction. (Refer to the speci cations.)
2. Avoid continuous energizationThere is no need for continuous energization. Depending on conditions, continuous energization may cause a rise in the coil temperature resulting in malfunction.
Caution1. Momentary energization
If a double solenoid valve is operated with momentary energization, it should be energized for at least 0.1 second.
2. Leakage voltage 1) The suppressor residual leakage voltage should be as follows.
AC coil: 15% or less of rated voltage DC coil: 2% or less of rated voltage2) Take note that the leakage voltage will increase when a resistor is used in parallel with switching element or a C-R circuit (surge voltage suppressor) is used for protecting a switching device because of the passing leakage voltage through the CR circuit.
3. Temperature conditionDo not use temperature outside of the speci cation range. Take appropriate measures to avoid freezing of drainage, moisture etc. in low temperature.
4. Operation for air blowingWhen using a solenoid valve for air blowing, use an external pilot type or direct acting type. In case of external pilot type, supply pressure should be same as speci cations (1.5 kgf/cm2)
5. Mounting orientationMounting orientation of a single solenoid is universal. No speci c orientation is necessary. When installing a double solenoid or a 3-position con guration, mount the valve so that spool valve is horizontal. Mount the valve vertically to the vibration for the place with vibration and shock. Avoid using at the place with vibration and shock outside of the speci cation range in catalouge.
Solenoid ValveReference Data
Wiring
Mounting
Caution 1. Do not use wire greater than size 0.5~1.25 . Do not apply force on the wire.2. Prevent "Chattering" happend at the contact point. 3. Attach surge killer or connect surge absorber parallelly with solenoid valve when the solenoid circuit reluctant to surge.4. Use voltage in the range ± 10% to the rated voltage.Use voltage in the range± 5%to the rated voltage when fast response is required to a DC current. Value of pressure drop is counted from wire connecting to the coil.
Warning1. Stop operate in the cases where leakage is increasing or device does not not work properly. Check mounting conditions when air and power supplies are connected. Initial function and leakage tests should be performed after installation.2. Please consult with KCC before applying paint to resinous parts, as this may have an adverse effect due to the solvent in the paint.
Valve
Leakage voltage
Leakage voltage
Pow
er sup
ply
Switch
ing
elem
ent
KCC Co., Ltd.
www.kccpr.com 53 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
Connector
Caution1. DIN type connector Internal connection of DIN connector are shown below. Connect it with power supply. Applicable model Applicable model
HPW, HPS, HDW, Hydraulic equipment KS320, KS342, KS530, KS640 Series
Applicable model KS210 SERIES
2. DIN connector wiring method 1) Loosen the mounting screw, and pull out the connector from solenoid valve ternimal block.
2) Remove the mounting screw, open and separate apart the terminal block and it's housing by using a at head screw driver.3) Loosen the terminal screw on the terminal block, insert the core of the wire into the terminal in accordance with the prescribed connection method and x it with terminal screws.4) Fasten the cord by screwing in the grand nut.
3. Cable wiring Be sure using Cabtyre cable with size between Ø 3.5 and Ø 7 which compliant with IP65. And, use rated torque range when fastening brown nut.
4. Cord entry changing method After separating the terminal block and housing, the cord entry direction can be changed by attaching the housing in the desired direction(from 4 directions in 90°)
5. Lamp equipped type Be careful so that lamp will not be damaged by wires. 6. Connector connection Connect the connector straightly in 90°. power saving circuit is applied, take care of polarity of the connector. Suitable outer diameter of Cabtyre wire is ø3.5~ø7
Solenoid ValveReference Data
Terminal 1 2
DIN43650B + -
Terminal 1 2
DIN43650C + -
Terminal 1 2
DIN43650A + -
Mounting screwtightening torque
Housing
Terminal block
Belt seat
Grommet (rubber)
3 Terminal screwTightening torque
Grand nutTightening torque
KCC Co., Ltd.
www.kccpr.com63 -
PNEUMATIC & HYDRAULIC
Piping
Caution1. Before piping is connected, it should be thoroughly blown out with air ( ushing) or washed to remove chips, cutting oil and other debris from inside the pipe.
2. When screwing piping or ttings into ports, ensure that chips from the pipe threads or sealing material do not enter the piping. Also, if pipe tape is used, leave 1.5~ 2.0 thread ridge exposed at the end of the threads.
3. For closed center or double check valve types, check the piping to prevent air leakage from the piping between the valve and the cylinder.
4. Tightening torque for pipingConnection thread Proper tightening torque
M5 15~20(1.5~2)
Rc(PT)1/8 70~90(7~9)
Rc(PT)1/4 120~140(12~14)
Rc(PT)3/8 220~240(22~24)
Rc(PT)1/2 280~320(28~30)
Solenoid ValveReference Data
Maintenance
Warning1. When components are removed, rst con rm that measures are in place to prevent workpieces from dropping,
run-away equipment, etc. Then, cut off the supply pressure and electric power, and exhaust all compressed air from the system using the residual pressure release function. For 3-position closed center or double check valve type, exhaust the residual pressure between the valve and the cylinder. When the equipment is operated after remounting or replacement, rst con rm that measures are in place to prevent lurching of actuators, etc. Then, con rm that the equipment is operating normally.
2. Valves should be operated regularly to prevent malfunction.
3. When the manual override is operated, connected equipment will be actuated. Operate after safety is con rmed.
Caution 1. Drain ushing
Remove drainage from the air lters regularly.
2. In the case of rubber seals, once lubrication has been started, it must be continued. Use class 1 turbine oil, ISO VG32.
3 Port Valve
Warning1. Can be used as a 3 port (N.C or N.O) valve by blocking one port of ports A or port B with a plug.
Plug position B Port A Port
Type N.C N.O
Solenoid valve
Single acting
Double acting
Winding direction
Pipe tape
Expose approx. 2 thread
KCC Co., Ltd.
www.kccpr.com 73 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KCC Co., Ltd.
www.kccpr.com83 -
PNEUMATIC & HYDRAULIC
KT100 series
KT100series
KT 110 - 3 GL - L
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type. Minimized installing area with its small size. Perfect for controlling system by PLC or computer with its low consuming
current type.
Solenoid Valve(3 Port Direct Acting/Non Lubricated)
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Electrical connectionGL Lead wire & lamp
Function Function Symbol
110 N.C
120 N.O
KT100-3GL-L KT100-3GL-M KT100-3GL-MB
Lead wire connection
L Vertical
M
Horizontal
Base
Nil
Without Base
B
With Base
With
Wtal
Type KT110 KT120Fluid Air, Inert gas
Effective sectional area
Smm2(Cv)
1 2 0.28 (0.016) 0.28 (0.016)
2 3 0.36 (0.020) 0.36 (0.020)
Operating pressure 0~7kgf/cm2
(0~0.7MPa) 0~6kgf/cm2 (0~0.6MPa)
Max. operating frequency 20 cycle/secResponse time (at 0.5MPa) 5ms
Lubrication Not requiredManual Override Non-locking push type (Standard)
Power consumption DC 1.0W (42mA)
Allowable voltage ±10% rated voltageAmbient & uid temperature -5 ~ 50 (No freezing)
Coil insulation Class BImpact/Vibration resistance 150/30 m/s2
Proctection structure Dust proofWeight 12.5g
KCC Co., Ltd.
www.kccpr.com 93 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KT100seriesSolenoid Valve(3 Port Direct Acting/Non Lubricated)
KT 100 - GL - L
Part no. Parts Material
1 Body Plastic Resin
2 Seat Brass
3 Packing Rubber
4 Return Spring SUS
5 Plunger SUS
6 Button Plastic Resin
7 Stopper SUS
8 Yoke Carbon Steel
9 Mold Cover Plastic Resin
10 Body Packing Rubber
11 Mounting Screw for Valve Carbon Steel
12 Base Zn
Structure
Dimensions
KT 100 - GL - M
For not shown dimensions, refer to KT 100- GL- L series.
Port
Mounting hole
(Lea
d w
ire
len
gth
)
(Lead wire length)
KCC Co., Ltd.
www.kccpr.com103 -
PNEUMATIC & HYDRAULIC KMF0100 series3 Port Manifold Block for KT100 Series
KMF0100 Manifold Block
How to Order
Dimensions
SeriesKMF0100 3 port manifold block for KT100 series
Station 2 2 Stations3 3 Stations~ ~20 20 Stations
KMF0100 - 05
KMF0100-05
GL - L Type GL - M Type
Station 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20L1 27.5 38 48.5 59 69.5 80 90.5 101 111.5 122 132.5 143 153.5 164 174.5 185 195.5 206 216.5L2 33.5 44 54.5 65 75.5 86 96.5 107 117.5 128 138.5 149 159.5 170 180.5 191 201.5 212 222.5
For not shown dimensions, refer to KT 100- GL- L series.
(Lead wire length)
Mounting hole
KCC Co., Ltd.
www.kccpr.com 113 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS105 series
Solenoid Valve(5 Port Pilot/Non Lubricated)
KS105 series
Electrical connectionGL Lead wire & lampG Lead wire
Manual overrideNil Non-locking push type (Standard)
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Type S D
Fluid Air, Inert gas
Port size M5Effective sectional area
Smm2(Cv) 3.6mm2 (0.2)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Max. operating frequency 5 cycle/secResponse time
{at 5kgf/cm2 (0.5MPa)} 25ms
Lubrication Not required
Manual override Non-locking push type (Standard)
Power consumption
DC 2.5W
AC 3.8/3.3VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Applicable cylinder Ø2.5~Ø40
Weight 80g 120g
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Minimized installing area with its small size.
Perfect for controlling system by PLC or computer with its low consuming current type.
KS105 S - 2 G -
Function Function Symbol
S Single acting
D Double acting
KS105S-2G KS105D-2G
GL TYPE G TYPE
Lead wire & lamp Lead wire
KCC Co., Ltd.
www.kccpr.com123 -
PNEUMATIC & HYDRAULIC KS105 series
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Metal
Structure
2 Position Single PilotKS 105S - G
2 Position Double PilotKS 105D - G
Solenoid Valve(5 Port Pilot/Non Lubricated)
Dimensions
Non-locking push button Non-locking
push button
KCC Co., Ltd.
www.kccpr.com 133 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
Compatible valveKCC CKD SMC SY TPC YPC PARKER
KS105 4KA-110 VZ-3120 SV-51 - SF1000 -
Station 2 3 4 5 6 7 8 9 10L1 40 56 72 88 104 120 136 152 168L2 50 66 82 116 114 130 146 162 178
KMF0500 Manifold Block
Dimensions
5 Port Manifold Block for KS105 Series
KMF0500 Manifold Block series
How to Order
Series
KMF0500 5 Port manifold block for KS105 series
Rc(PT) (Standard)
KMFG0500 G
Station 2 2 Stations 5 5 Stations 8 8 Stations3 3 Stations 6 6 Stations 9 9 Stations4 4 Stations 7 7 Stations 10 10 Stations
KMF0500 - 5
Spare Plate
Spare Plate(Material:SCP1)
Manifold Gasket(Material:NBR)
15.032.0
Part no. : KMF0500-S.PAccessory of manifold blockKMF0500-4 A l kf if ld bll
Non-locking push button Lead wire length
KCC Co., Ltd.
www.kccpr.com143 -
PNEUMATIC & HYDRAULIC
KS210 series
KS210 series
Speci cations
Solenoid Valve(5 Port Pilot/Non Lubricated)
Type S D H / I / J
Fluid Air, Inert gas
Port size Rc(PT) 1/8, G 1/8Effective sectional area
Smm2(Cv) 12.6mm2 (0.6) 9.0mm2 (0.5)
Operating pressure 1.5~9kgf/cm2
(0.15~0.9MPa)2~9kgf/cm2
(0.2~0.9MPa)Max. operating frequency 5 cycle/sec 3 cycle/sec
Response time {at 5kgf/cm2 (0.5MPa)} 25ms 35ms
Lubrication Not required
Manual override Non-lock push type (Standard)
Power consumption
DC 2.5W
AC 3.5/3.0VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Applicable cylinder Ø12~Ø63
Weight 130g 180g 200g
GL TYPE GLS TYPE G TYPE
Lead wire & lampLead wire, lamp & surge
suppressor Lead wire
D TYPE Z TYPE
DIN coil + DIN connector
DIN coil + DIN connector with lamp + Surge
suppressor
KS 210 S - 2 GL
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
How to Order
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressor
G Lead wireD DIN coil + DIN connector
Z DIN coil + DIN connector with lamp + Surge suppressor
Port type Nil Rc(PT) (Standard)G G
FunctionFunction Symbol
S Single acting
D Double acting
H Closed center
I Pressure center
J Exhaust center
KS210S-2G KS210D-2GL KS210H-2DKS210S-2G
Features
Excellent durability with its non-lubricated type.
Minimized installing area with its small size.
Perfect for controlling system by PLC or computer with its low consuming current type.
Certified by KIMM (Korean Institute of Machinery & Materials), This product is approved to maintain the quality and performance from the begining under being given environmental conditions.
KCC Co., Ltd.
www.kccpr.com 153 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS210 series
Structure
2 Position Double PilotKS 210D - D KS 210H(I, J) - GL
3 Position Double (H, I, J) Pilot
Dimensions
2 Position Single PilotKS 210S - GL
Solenoid Valve(5 Port Pilot/Non Lubricated)
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Metal
Dimensions
Non-locking push button
Non-locking push button
Non-locking push button
KCC Co., Ltd.
www.kccpr.com163 -
PNEUMATIC & HYDRAULIC
KMF1000 Manifold Block
KMF1000 Manifold Block series
How to Order
Compatible valveKCC CKD SMC SY TPC YPC PARKER
KS210 4KA-210 VZ-5120 SV-110 DS2010 SF2000 PHS510
Station 2 3 4 5 6 7 8 9 10L1 47 66 85 104 123 142 161 180 199L2 59 78 97 116 135 154 173 192 211
5 Port Manifold Block for KS210 Series
Dimensions
Station 2 2 Stations 5 5 Stations 8 8 Stations3 3 Stations 6 6 Stations 9 9 Stations4 4 Stations 7 7 Stations 10 10 Stations
KMF1000 - 4
Spare Plate
Spare Plate(Material:SCP1)
Manifold Gasket(Material:NBR)
18.045.0
Part no. : KMF1000-S.PAccessory of manifold blockKMF1000-4 Accessor cky of mannifold blococn
Non-locking push button
Lead wire
Series
KMF1000 5 Port manifold block for KS210 series
Rc(PT) (Standard)
KMFG1000 G
KCC Co., Ltd.
www.kccpr.com 173 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS320 series
Solenoid Valve(5 Port Pilot/Non Lubricated)
Type S D H / I / JFluid Air, Inert gas
Port size Rc(PT) 1/4, G 1/4Effective sectional area
Smm2(Cv) 19mm2 (1.0) 14mm2 (0.8)
Operating pressure 1.5~9kgf/cm2
(0.15~0.9MPa)2~9kgf/cm2
(0.2~0.9MPa)Max. operating frequency 5 cycle/sec 3 cycle/sec
Response time {at 5kgf/cm2 (0.5MPa)} 30ms 40ms
Lubrication Not required
Manual override Non-locking push type (Standard), Locking type
Power consumption
DC 2.8WAC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltageAmbient & uid temperature 5 ~ 60
Coil insulation Class FApplicable cylinder Ø32~Ø100
Weight 250g 350g 450g
KS320 series
KS 320 S - 2 GL -
Manual overrideNil Non-locking push type (Standard)L Locking type
OptionNil Without bracketB With bracket
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Speci cations
How to Order
Electrical connectionGL Lead wire & lamp
GLS Lead wire +lamp & surge suppressor
G Lead wire
D DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
GU Lamp with 90°plug(400mm)
GP Lamp with 180°plug(400mm)
DEXT4 Explosion proof
M DIN coil + Metal DIN connector
Port typeNil Rc(PT) (Standard)G G
O-RingNil Without O-Ring (Standard)C With O-Ring
FunctionFunction Symbol
S Single acting
D Double acting
H Closed center
I Pressure center
J Exhaust center
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector
(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KS320S-2D KS320D-2GL KS320H-2GKS320S-2D KS320D-2GL KS320H-2GKS320H 2GBracket only applicable for
KS320S series.
OptionBracket
Features
Excellent durability with its non-lubricated type.
Minimized installing area with its small size.
Perfect for controlling system by PLC or computer with its low consuming current type.
(Option:1 pc of bracket, 2 pcs of mounting screws)
Certified by KIMM (Korean Institute of Machinery & Materials), This product is approved to maintain the quality and performance from the begining under being given environmental conditions.
KCC Co., Ltd.
www.kccpr.com183 -
PNEUMATIC & HYDRAULIC KS320 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
2 Position Single PilotKS 320S - D
2 Position Double PilotKS 320D - D
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Plastic Resin
Structure
Dimensions
Dimensions
3 Position Double (H, I, J) PilotKS 320H(I,J) - GL
Non-locking push button
Non-locking push button
Non-locking push button
KCC Co., Ltd.
www.kccpr.com 193 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
Compatible valveKCC CKD SMC SY TPC YPC PARKER
KS320 - VF-3130 SV-210 DS3000 SF4000 PHS520
Station 2 3 4 5 6 7 8 9 10L1 71.5 99 126.5 154 181.5 209 236.5 264 291.5L2 83 111 138.5 166 193.5 221 248.5 276 303.5
KMF2000 Manifold Block
Dimensions
How to Order
Station 2 2 Stations 5 5 Stations 8 8 Stations3 3 Stations 6 6 Stations 9 9 Stations4 4 Stations 7 7 Stations 10 10 Stations
KMF2000 - 4
Spare Plate
Spare Plate(Material:SCP1)
Manifold Gasket(Material:NBR)
27.052.0
5 Port Manifold Block for KS320 Series
KMF2000 Manifold Block series
Part no. : KMF2000-S.PKMF2000-4 Accessory of manifold blockKMF2000-4
Series
KMF2000 5 Port manifold block for KS320 series
Rc(PT) (Standard)
KMFG2000 G
Non-locking push button
Lead wire
KCC Co., Ltd.
www.kccpr.com203 -
PNEUMATIC & HYDRAULIC
KS530 series
Solenoid Valve(5 Port Pilot/Non Lubricated)
Type S D H / I / J
Fluid Air, Inert gas
Port size Rc(PT) 3/8, G 3/8Effective sectional area
Smm2(Cv) 45mm2 (2.5) 38mm2 (2.1)
Operating pressure 1.5~9kgf/cm2
(0.15~0.9MPa)2~9kgf/cm2
(0.2~0.9MPa)Max. operating frequency 5 cycle/sec 3 cycle/sec
Response time {at 5kgf/cm2 (0.5MPa)} 30ms 40ms
Lubrication Not required
Manual override Non-locking push type(Standard), Locking type
Power consumption
DC 2.8W
AC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Applicable cylinder Ø32~Ø125
Weight 430g 490g 530g
KS530 series
Speci cations
KS 530 S - 2 GL -
Manual overrideNil Non-locking push type (Standard)L Locking type
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
How to Order
Port type Nil Rc(PT) (Standard)G G
Function Function Symbol Function Symbol
S Single acting I Pressure
center
D Double acting J Exhaust
center
H Closed center
KS530S-2GL KS530D-2D KS530H-2GKS530S-2GL KS530D-2D KS530H-2G
Features
Excellent durability with its non-lubricated type.
Large capacity valve can be used in combination with large pneumatic actuator. Perfect for controlling system by PLC or computer with its low consuming
current type.
Certified by KIMM (Korean Institute of Machinery & Materials), This product is approved to maintain the quality and performance from the begining under being given environmental conditions.
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressor
G Lead wire
D DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
GU Lamp with 90°plug(400mm)
GP Lamp with 180°plug(400mm)
DEXT4 Explosion proof
M DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector
(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 213 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS530 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Plastic Resin
Structure
Dimensions
2 Position Double PilotKS 530D - D
Dimensions
2 Position Single PilotKS 530S - GL
Non-locking push button
Non-locking push button
KCC Co., Ltd.
www.kccpr.com223 -
PNEUMATIC & HYDRAULIC
3 Position Double (H, I, J) PilotKS 530H(I,J) - GL
Dimensions
Non-locking push button
Solenoid Valve(5 Port Pilot/Non Lubricated)
KS530 series
KCC Co., Ltd.
www.kccpr.com 233 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KMF3000 Manifold Block series5 Port Manifold Block for KS530 Series
KMF3000 Manifold Block
Dimensions
How to Order
Station 2 2 Stations 5 5 Stations 8 8 Stations3 3 Stations 6 6 Stations 9 9 Stations4 4 Stations 7 7 Stations 10 10 Stations
KMF3000 - 4
Spare Plate
Spare Plate(Material:SCP1)
Manifold Gasket(Material:NBR)
32.075.5
Compatible valveKCC CKD SMC SY TPC YPC PARKER
KS530 - VF-5120 SV-310 DS5000 SF5000 PHS530
Station 2 3 4 5 6 7 8 9 10L1 80 113 146 179 212 245 278 311 344L2 93 126 159 192 225 258 291 324 357
Part no. : KMF3000-S.P
KMF3000-4 Accessory of manifold blockKMF3000-4 A ckf if ld bl ki
Series
KMF3000 5 Port manifold blockfor KS530 series
Rc(PT) (Standard)
KMFG3000 G
Non-locking push button
Lead wire
KCC Co., Ltd.
www.kccpr.com243 -
PNEUMATIC & HYDRAULIC
KS640 series
Solenoid Valve(5 Port Pilot/Non Lubricated)
KS640 series
Type S D H / I / J
Fluid Air, Inert gas
Port size Rc(PT) 1/2, G 1/2Effective sectional area
Smm2(Cv) 65mm2 (3.6) 50mm2 (2.8)
Operating pressure 1.5~9kgf/cm2
(0.15~0.9MPa)2~9kgf/cm2
(0.2~0.9MPa)Max. operating frequency 3 cycle/sec 2 cycle/sec
Response time {at 5kgf/cm2 (0.5MPa)} 30ms 40ms
Lubrication Not required
Manual override Non-locking push type (Standard), Locking type
Power consumption
DC 2.8W
AC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Applicable cylinder Ø50~Ø160
Weight 500g 620g 850g
Speci cations
KS 640 S - 2 GL -
Manual overrideNil Non-locking push type (Standard)L Locking type
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V] is available.
How to Order
Port type Nil Rc(PT) (Standard)G G
Function Function Symbol Function Symbol
S Single acting I Pressure
center
D Double acting J Exhaust
center
H Closed center
KS640S-2G KS640D-2GL KS640H-2DKS640S-2G KS640D-2GL KS640H-2DKS640H 2D
Features
Excellent durability with its non-lubricated type.
Large capacity valve can be used in combination with large pneumatic actuator. Perfect for controlling system by PLC or computer with its low consuming
current type.
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressor
G Lead wire
D DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
GU Lamp with 90°plug(400mm)
GP Lamp with 180°plug(400mm)
DEXT4 Explosion proof
M DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector
(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 253 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS640 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
2 Position Double PilotKS 640D - D
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Plastic Resin
Structure
Dimensions
Dimensions
2 Position Single PilotKS 640S - D
Non-locking push button
Non-locking push button
KCC Co., Ltd.
www.kccpr.com263 -
PNEUMATIC & HYDRAULIC KS640 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
Non-locking push button
2 Position Double PilotKS 640H(I, J) - GL
Dimensions
KCC Co., Ltd.
www.kccpr.com 273 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KMF4000 Manifold Block
KMF4000 Manifold Block series
How to Order
5 Port Manifold Block for KS640 Series
Dimensions
Station2 2 Stations 5 5 Stations 8 8 Stations3 3 Stations 6 6 Stations 9 9 Stations4 4 Stations 7 7 Stations 10 10 Stations
KMF4000 - 4
Spare Plate
Spare Plate(Material:SCP1)
Gasket O-Ring(Material:NBR)
36.090.0
Compatible valveKCC CKD SMC SY TPC YPC PARKER
KS640 - - SV-420 DS5000 SF6000 PHS540
Station 2 3 4 5 6 7 8 9 10L1 88 125.5 163 200.5 238 275.5 313 350.5 388L2 103 140.5 178 215.5 253 290.5 328 365.5 403
Part no. : KMF4000-S.PAccessory of manifold block
Lead wire
Non-locking push button
KMF4000-4
Series
KMF4000 5 Port manifold block for KS640 series
Rc(PT) (Standard)
KMFG4000 G
KCC Co., Ltd.
www.kccpr.com283 -
PNEUMATIC & HYDRAULIC
KS 524 S - 2 GL -
KS524 series (NAMUR Small type)
Solenoid Valve(5 Port Pilot/Non Lubricated)
Type S D
Fluid Air, Inert gas
Port size Rc(PT) 1/4, G 1/4Effective sectional area
Smm2(Cv) 19mm2 (1.0)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Max. operating frequency 5 cycle/secResponse time
{at 5kgf/cm2 (0.5MPa)} 30ms
Lubrication Not required
Manual override Non-locking push type (Standard), Locking type
Power consumption
DC 2.8W
AC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~60
Coil insulation Class F
Applicable cylinder Ø32~Ø100
Weight 224g 316g
KS524 series
Port type Nil Rc(PT) (Standard)G G
Speci cations
How to Order
Manual overrideNil Non-locking push type (Standard)L Locking type
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
FunctionFunction Symbol
S Single acting
D Double acting
KS524S-2GL KS524D-2DKS524D 2D
Features
Excellent durability with its non-lubricated type.
Perfect for controlling system by PLC or computer with its low consuming current type.
Large capacity valve can be used in combination with large pneumatic actuator.
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressorG Lead wireD DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZUL DIN coil + DIN connector with lamp + Surge suppressor (UL Approval)
GU Lamp with 90°plug(400mm)GP Lamp with 180°plug(400mm)
DEXT4 Explosion proofM DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector
(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 293 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS524 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Plastic Resin
Structure
Dimensions
2 Position Double PilotKS 524D - D
Non-locking push button
2 Position Single PilotKS 524S - D
Dimensions
Non-locking push button
KCC Co., Ltd.
www.kccpr.com303 -
PNEUMATIC & HYDRAULIC
KS 534 S - 2 GL -
KS534 series (NAMUR)
Solenoid Valve(5 Port Pilot/Non Lubricated)
Type S D
Fluid Air, Inert gas
Port size Rc(PT) 1/4, G 1/4Effective sectional area
Smm2(Cv) 31.2mm2 (1.7)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Max. operating frequency 5 cycle/secResponse time
{at 5kgf/cm2 (0.5MPa)} 30ms
Lubrication Not required
Manual override Non-locking push type (Standard), Locking type
Power consumption
DC 2.8W
AC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Applicable cylinder Ø32~Ø125
Weight 330g 410g
KS534 series
Port type Nil Rc(PT) (Standard)G G
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Perfect for controlling system by PLC or computer with its low consuming current type.
Large capacity valve can be used in combination with large pneumatic actuator.
Manual overrideNil Non-locking push type (Standard)L Locking type
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
FunctionFunction Symbol
S Single acting
D Double acting
KS534S-2GL KS534D-2DKS534D-2DKS534D 2DKS534S-2GL
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressorG Lead wireD DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZUL DIN coil + DIN connector with lamp + Surge suppressor (UL Approval)
GU Lamp with 90°plug(400mm)GP Lamp with 180°plug(400mm)
DEXT4 Explosion proofM DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector
(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 313 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS534 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Plastic Resin
Structure
Dimensions
2 Position Double PilotKS 534D - D
Non-locking push button
Non-locking push button
2 Position Single PilotKS 534S - D
Dimensions
KCC Co., Ltd.
www.kccpr.com323 -
PNEUMATIC & HYDRAULIC
KS328 series
Solenoid Valve(5 Port Pilot/Non Lubricated)
Type S D H / I / J (Under development)
Fluid Air, Inert gasPort size Rc(PT) 1/4, 3/8, G 1/4, 3/8
Effective sectional areaSmm2(Cv) 19mm2 (1.0) 14mm2 (0.8)
Operating pressure 1.5~9kgf/cm2
(0.15~0.9MPa)2~9kgf/cm2
(0.2~0.9MPa)Max. operating frequency 5 cycle/sec 3 cycle/sec
Response time{at 5kgf/cm2 (0.5MPa)} 30ms 40ms
Lubrication Not required
Manual override Non-locking push type (Standard), Locking type
Power consumption
DC 2.8WAC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltageAmbient & uid temperature 5 ~ 60
Coil insulation Class FApplicable cylinder Ø32 ~ Ø100
Weight 400g 500g 600g
KS328 series
OptionNil Without sub base
B02 With sub base/ Port Rc(PT)1/4 B03 With sub base/ Port Rc(PT)3/8G02 With sub base/ Port G1/4G03 With sub base/ Port G3/8
Speci cations
KS328S-2D KS328D-2GL KS328H-2GSub base attached
KS328S-2D KS328D-2GL KS328H-2GS b b tt h d
KS 328 S - 2 GL - -
Manual overrideNil Non-locking push type (Standard)L Locking type
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
How to Order
FunctionFunction Symbol
S Single acting
D Double acting
H(Under
development)
Closed center
I(Under
development)
Pressure center
J(Under
development)
Exhaust center
Features
Excellent durability with its non-lubricated type.
Minimized installing area with its small size.
Perfect for controlling system by PLC or computer with its low consuming current type.
Certified by KIMM (Korean Institute of Machinery & Materials), This product is approved to maintain the quality and performance from the begining under being given environmental conditions.
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressor
G Lead wire
D DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
GU Lamp with 90°plug(400mm)
GP Lamp with 180°plug(400mm)
DEXT4 Explosion proof
M DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector
(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 333 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS328 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
2 Position Single PilotKS 328S - D
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Metal
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Plastic Resin
Structure
Dimensions
Non-locking push button
SUB BASE
KCC Co., Ltd.
www.kccpr.com343 -
PNEUMATIC & HYDRAULIC KS328 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
Dimensions
2 Position Double PilotKS 328D - GL - - B03
Base Attached 2 Position Single PilotKS 328S - D - B03
Non-locking push buttonNon-locking
push button
KCC Co., Ltd.
www.kccpr.com 353 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS328 seriesSolenoid Valve(5 Port Pilot/Non Lubricated)
3 Position Double (H, I, J) PilotKS 328H(I, J) - GL - B03
(Under Develpment)
Dimensions
Non-locking push button
KCC Co., Ltd.
www.kccpr.com363 -
PNEUMATIC & HYDRAULIC
KS760 series
Solenoid Valve(5 Port Pilot/Non lubricated)
KS760 series
How to Order
KS 760 S - 15 - 1 GL V -
Manual overrideNil Non-locking push type (Standard)L Locking type
Coil directionV Vertical
HHorizontal
only for single acting & double acting type.
Port size15 1/2 20 3/4
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Port type Nil Rc(PT) (Standard)G G
Function Function Symbol
S Single acting
D Double acting
H Closed center
I Pressure center
J Exhaust center
Electrical connection
GL Lead wire & lamp Z DIN coil + DIN connector with lamp + Surge suppressor
GLS Lead wire + lamp & surge suppressor ZUL
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)G Lead wire GU Lamp with 90°plug(400mm)
D DIN coil + DIN connector GP Lamp with 180°plug(400mm)
DUL DIN coil + DIN connector (UL Approval) DEXT4 Explosion proof
M DIN coil + Metal DIN connector
KS760S KS760D
Type S D H / I / J
Fluid Air, Inert gas
Port size Rc(PT) 1/2, 3/4, G 1/2, 3/4Effective sectional area
Smm2(Cv) 92mm2 (5) 82mm2 (4.4)
Operating pressure 1.5~10kgf/cm2
(0.15~1.0MPa)Response time (at
0.5MPa) 200ms 300ms
Lubrication Not required
Manual override Non-locking push type(Standard), Locking type
Power consumption
DC 6.0W
AC 5.0/4.0VA (50/60Hz)
Allowable voltage ±10% rated voltageAmbient & uid
temperature 5 ~ 60
Coil insulation Class F
Applicable cylinder ø140 ~ ø300
Weight 2000g 2150g 2300g
Speci cations
Features Mounting position of coil, upper type(standard) and lateral type(H-Type)
is selectable according to its mounting space.
High- ow valve adopts subplate piping method.
Applicable to large pneumatic cylinder(ø140 ~ ø300)
Common mounting hole size which is compatible with other brand product.
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector
(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 373 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KS760 seriesSolenoid Valve(5 Port Pilot/Non lubricated)
Part no. Parts Material
1 Cover PPS GF40% (Black)
2 Body AL D/C
3 Spool A2011BD
4 Seat Gasket NBR
5 Piston AL
6 Coil Ass'y -
7 Coil Plastic Resin
8 Base Gasket NBR
Structure
KS760S- - V
Dimensions
KCC Co., Ltd.
www.kccpr.com383 -
PNEUMATIC & HYDRAULIC KS760 seriesSolenoid Valve(5 Port Pilot/Non lubricated)
KS760D- - H
KS760S- - H
Dimensions
KCC Co., Ltd.
www.kccpr.com 393 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KS760H - - V
KS760D- - V
Dimensions
KS760 seriesSolenoid Valve(5 Port Pilot/Non lubricated)
KCC Co., Ltd.
www.kccpr.com403 -
PNEUMATIC & HYDRAULIC
KS 341 S - 2 GL
KS341 series
Solenoid Valve(3 Port Pilot/Non Lubricated)
Type S / O D
Fluid Air, Inert gas
Port size Rc(PT) 1/8, G 1/8Effective sectional area
Smm2(Cv) 12.6mm2 (0.6)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Max. operating frequency 5 cycle/secResponse time
{at 5kgf/cm2 (0.5MPa)} 25ms
Lubrication Not required
Manual override Non-locking push type (Standard)
Power consumption
DC 2.5W
AC 3.5/3.0VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Applicable cylinder Ø12~Ø63
Weight 104g 156g
KS341 series
Speci cations
How to Order
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressorG Lead wireD DIN coil + DIN connector
Z DIN coil + DIN connector with lamp + Surge suppressor
Features
Excellent durability with its non-lubricated type.
Minimized installing area with its small size.
Perfect for controlling system by PLC or computer with its low consuming current type.
GL TYPE GLS TYPE G TYPE
Lead wire & lampLead wire + lamp & surge
suppressor Lead wire
D TYPE Z TYPE
DIN coil + DIN connectorDIN coil + DIN connector with
lamp + Surge suppressor
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Port type Nil Rc(PT) (Standard)G G
FunctionFunction Symbol
S Single acting, N.C
O Single acting, N.O
D Double acting
KS341D-2GKS341S-2G
KCC Co., Ltd.
www.kccpr.com 413 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS341 seriesSolenoid Valve(3 Port Pilot/Non Lubricated)
2 Position Single PilotKS 341S - GL
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Metal
Structure
Dimensions
2 Position Double PilotKS 341D - GL
Non-locking push button Non-locking
push button
KCC Co., Ltd.
www.kccpr.com423 -
PNEUMATIC & HYDRAULIC
KMF2341 Manifold Block
KMF2341 Manifold Block series3 Port Manifold Block for KS341 Series
Dimensions
Station 2 3 4 5 6 7 8 9 10L1 47 66 85 104 123 142 161 180 199L2 59 78 97 116 135 154 173 192 211
Spare Plate
Spare Plate(Material:SCP1)
Manifold Gasket(Material:NBR)
18.0 36.0
Part no. : KMF2341-S.PKMF2341-4
Non-locking push button
Lead wire
Accessory of manifold block
How to Order
KMF2341 - 4
Series
KMF2341 3 Port manifold block for KS2341 series
Rc(PT) (Standard)
KMFG2341 G
Station 2 2 Stations 5 5 Stations 8 8 Stations3 3 Stations 6 6 Stations 9 9 Stations4 4 Stations 7 7 Stations 10 10 Stations
KCC Co., Ltd.
www.kccpr.com 433 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KS342 series
Solenoid Valve(3 Port Pilot/Non Lubricated)
Type S / O D
Fluid Air, Inert gas
Port size Rc(PT) 1/4, G 1/4Effective sectional area
Smm2(Cv) 19mm2 (1.0)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Max. operating frequency 5 cycle/secResponse time
{at 5kgf/cm2 (0.5MPa)} 30ms
Lubrication Not required
Manual override Non-locking push type (Standard), Locking type
Power consumption
DC 2.8W
AC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Applicable cylinder Ø32~Ø100
Weight 230g 320g
KS342 series
Speci cations
How to Order
Manual overrideNil Non-locking push type (Standard)L Locking type
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Port type Nil Rc(PT) (Standard)G G
KS 342 S - 2 GL -
FunctionFunction Symbol
SSingle acting,
N.C
OSingle acting,
N.O
D Double acting
KS342S-2GKS342S 2G KS342D-2GL
OptionBracket
OptionNil Without bracketB With bracket
Bracket only applicable for KS342S/O series.
(Option:1 bracket, 2 mounting screws)
Features
Excellent durability with its non-lubricated type.
Minimized installing area with its small size.
Perfect for controlling system by PLC or computer with its low consuming current type.
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressor
G Lead wire
D DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
GU Lamp with 90°plug(400mm)
GP Lamp with 180°plug(400mm)
DEXT4 Explosion proof
M DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com443 -
PNEUMATIC & HYDRAULIC KS342 seriesSolenoid Valve(3 Port Pilot/Non Lubricated)
2 Position Single PilotKS 342S(O) - GL
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Plastic Resin
Structure
Dimensions
2 Position Double PilotKS 342D - D
Non-locking push button
Non-locking push button
KCC Co., Ltd.
www.kccpr.com 453 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
Compatible valveKCC CKD SMC SY TPC YPC PARKER
KS342 - VF-342 - DS-301 - -
Station 2 3 4 5 6 7 8 9 10L1 66 93 120 147 174 201 228 255 282L2 77 104 131 158 185 212 239 266 293
KMF2342 Manifold Block
KMF2342 Manifold Block series
How to Order
3 Port Manifold Block for KS342 Series
Dimensions
Station 2 2 Stations 5 5 Stations 8 8 Stations3 3 Stations 6 6 Stations 9 9 Stations4 4 Stations 7 7 Stations 10 10 Stations
KMF2342 - 4
Spare Plate
Spare Plate(Material:SCP1)
Manifold Gasket(Material:NBR)
26.6 39.0
Part no. : KMF2342-S.PKMF2342-4KMF2342-4
Series
KMF2342 3 Port manifold block for KS342 series
Rc(PT) (Standard)
KMFG2342 G
Non-locking push button
Lead wire length
Accessory of manifold block
KCC Co., Ltd.
www.kccpr.com463 -
PNEUMATIC & HYDRAULIC
KPS542 series
KPS542 series
KPS 542 - 03 - 2 GL -
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
A single valve with 6 valve functions. (Universal porting type)
With the structure of a valve preventing xation and resistant to dust it operates perfectly.
Perfect for controlling system by PLC or computer with its low consuming current type.
Port type Nil Rc(PT) (Standard)G G
Port size03 Rc(PT) 3/8 (Standard)
(Vacuum) Solenoid Valve(3 Port Poppet/Non Lubricated)
Voltage 1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Manual overrideNil Non-locking push type (Standard)L Locking type
External Pilot
Use external pilot type in the following cases.
For vacuum, low pressure 0.2MPa or less.
Consult us when using in a vacuum holding condition.
When having P port downsized in diameter.
When using A port as the atmospheric releasing port, e.g. air blower
Function Function Symbol
Nil N.C
O N.O
RExternal
pilot (Vacuum)
Universal
KPS542-03-2G KPS542R-03-2DKPS542R-03-2D
External Pilot1/8
Fluid Air, Inert gas
Port size Rc(PT) 3/8, G 3/8Effective sectional area
Smm2(Cv) 45 (2.4)
Pilot type Internal pilot External pilot
Operating pressure 2.0~8.0kgf/cm2
(0.2~0.8MPa)
Supply pressure
-1.0~8.0kgf/cm2
(-0.1~0.8MPa)External
pilot pressure
Same as operating pressure
(Min. 2kgf/cm2 0.2MPa)Max. operating frequency 5 cycle/sec
Response time (at 0.5MPa) 30ms
Lubrication Not required
Manual override Non-locking push type (Standard), Locking type
Power consumption
DC 2.8WAC 4.5/3.6 VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~60
Coil insulation Class F
Applicable cylinder ø32~ø125
Weight 266g
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressor
G Lead wireD DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
GU Lamp with 90°plug(400mm)GP Lamp with 180°plug(400mm)
DEXT4 Explosion proofM DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector
(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 473 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KPS542 series(Vacuum) Solenoid Valve(3 Port Poppet/Non Lubricated)
2 Position SingleKPS 542 - G
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring Seat Brass
3 Spool Ass'y AL & Others
4 Body AL D/C
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Seat Plastic Resin
8 Plunger Stainless Steel
9 Coil Ass'y CU & Others
10 Lock Nut Plastic Resin
Structure
Dimensions
2 Position SingleKPS 542 - D
Applications1. Blow Valve 2. Pressure Release Valve 3. Selector Valve
4. Valve for Vacuum 5. Divider Valve 6. Single-Acting Cylinder Drive
7. Double-Acting Cylinder Drive 8. Double-Acting Cylinder Drive (Exhaust Center)
X Port X Port
X Port
Vacuum Pump
Vacuum Filter
Vacuum Pad
X Port
Exhaust Center
X PortX Port
Tank
Tank
(Only for KPS542 R series)(External pilot port)
Push buttonMounting hole
Switching mark
Lead
wir
e le
ng
th
(Mounting hole)
(Only for KPS542 R series)
(External pilot port)
Push buttonMounting hole
Switching mark
(Mounting hole)
KCC Co., Ltd.
www.kccpr.com483 -
PNEUMATIC & HYDRAULIC
KCAS 2 - C6 - 3 G
KCAS series
Solenoid Valve(2, 3 Port Direct Acting/One Touch Fitting)
KCAS series
Speci cations
How to Order
Features
Direct acting type
Normally close type
Burn proof structure, long service life
High speed response
Suitable to use with constant delivery machine.
Custom made of 2 Port, 3 Port N.O, at 5kgf/cm2 available.
KCAS2-C6-3G
Number of Port
2 2 Port
3 3 Port
Port typeM5 M5 01 Rc(PT)1/8 C4 Ø4 One touch ttingC6 Ø6 One touch tting (Standard)
KCAS3-C6-2G KCAS3-C6-2G KCAS2-C6-3G
Voltage 1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Electrical connectionGL Lead wire & lampG Lead wire
GL TYPE G TYPE
Lead wire & lamp Lead wire
Type 2 Port 3 Port
Fluid Compressed air, Inert gas
Port size M5, Rc(PT) 1/8, Ø4,Ø6 (Standard) One touch tting
Ori ce Ø0.6mm (Standard)Effective sectional area
Smm 2(Cv) 0.26 (0.014)
Operating pressure 0~7kgf/cm 2 (0~0.7MPa)
Max. operating frequency 10 cycle/sec
Response time (at 5kgf/cm 2) 20ms
Function 2/2 Way type 3/2 Way type
Seal material NBR
Body material Aluminium (Standard), Brass
Power consumption
DC 2.8W
AC 3.8/3.3VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~60
Coil insulation Class F
Weight 58g
KCC Co., Ltd.
www.kccpr.com 493 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KCAS seriesSolenoid Valve(2, 3 Port Direct Acting/One Touch Fitting)
Part no. Parts Material
1 Body AL
2 Plunger Spring SUS
3 Plunger Stainless Steel
4 Yoke SPC
5 Coil Ass'y CU & Others
6 Lock Nut Metal
Structure
≥
Choose one out of Choose one out of
Dimensions
KCC Co., Ltd.
www.kccpr.com503 -
PNEUMATIC & HYDRAULIC
KJAS series
KJAS series
KJAS 2 9 - 2 D - 02
Speci cations
How to Order
Features
Direct acting type
Normally close type
Burn proof structure, long service life
High speed response
Suitable to use with constant delivery machine.
Easy multi-station adaptation
Custom made of 2Port, 3Port N.O, at 5kgf/cm2 is available.
Ori ce9 Ø1.5 (Standard)1 Ø1
Voltage 1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Seal material Nil NBR (Standard)V Viton Number of valves02 2 pcs03 3 pcs~ ~10 10 pcs
Solenoid Valve(2, 3 Port Direct Acting)
Port typeNil Rc(PT) (Standard)G G
Number of port Number of port Symbol
2 2 port
3 3 port
KJAS39-2D KJAS29-2DKJAS39-2D-05
(With manifold block)KJAS39 2DKJAS39-2D-05
(With manifold block)KJAS39 2D 05
Type 2 Port 3 Port
Fluid Air, Water, Oil
Port size A: Rc(PT)1/8, P: Rc(PT)1/8, R: M5
Ori ce Ø1.5mm(Standard), Ø1.0mmEffective sectional area
Smm2(Cv) 1.7 (1.0), 0.65(0.04)
Operating pressure 0~7kgf/cm2 (0~0.7MPa)
Max. operating frequency 10 cycle/sec
Response time (at 0.5MPa) 20ms
Function 3/2Way type, 2/2 Way type
Seal material NBR, Viton
Body material
Individual type Brass
Manifold type Aluminium
Power consumption
DC 2.8W, 6W
AC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Weight 140g
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressor
G Lead wireD DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
GU Lamp with 90°plug(400mm)GP Lamp with 180°plug(400mm)
DEXT4 Explosion proofM DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil + DIN connector(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 513 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
Station 2 3 4 5 6 7 8 9 10L1 56 80 104 128 152 176 200 224 248L2 64 88 112 136 160 184 208 231 256
KJAS seriesSolenoid Valve(2, 3 Port Direct Acting)
KJAS 2(3)9 - D(Z)
Part no. Parts Material
1 Body Single Acting: Brass, Manifold block attached type:AL
2 Plunger Spring SUS
3 Plunger Stainless Steel
4 Yoke SPC
5 Coil Ass'y Cu & Others
6 Lock Nut Metal, Plastic Resin
Structure
Dimensions-Manifold Block Attached Type
Dimensions
Except 2-port type
Mounting hole
KCC Co., Ltd.
www.kccpr.com523 -
PNEUMATIC & HYDRAULIC
KST series
Type KST20 (2 Way) KST30 (3 Way)
Fluid Air, Inert gas
Port size Rc(PT) 1/8, G 1/8
Ori ce Ø0.9mm (Standard)Effective sectional area
Smm2(Cv) 0.65mm2 (0.04)
Operating pressure 0~8kgf/cm2 (0~0.8MPa)
Max. operating frequency 10 cycle/secResponse time
{at 5kgf/cm2 (0.5MPa)} 20ms
Seal material NBR, VITON
Body material AL
Manual override Non-locking push button(Standard),Lever (Option)
Power consumption
DC 2.8W, 6W
AC 4.5/3.6VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient & uid temperature 5 ~ 60
Coil insulation Class F
Weight 130g
KST series
KST 2 0 - 2 D - -
Speci cations
How to Order
Ori ce0 ø0.9 (Standard)
Seal Material Nil NBR (Standard)V Viton
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Number of valves on manifold block 02 2 pcs03 3 pcs~ ~10 10 pcs
For manifold block is attached type.
Solenoid Valve(2, 3 Port Direct Acting)
Features
Direct acting type Normally close type Burn proof structure, long service life High speed response Suitable to use with constant delivery machine. Custom made of 2Port, 3Port N.O, at 5kgf/cm 2 is available.
Easy multi-station adaptation Beautiful appearance Free mount type Manual override is available
Port type Nil Rc(PT) (Standard)G G
Symbol Function Symbol
2 2 WayN.C
3 3 WayN.C
KST20-2D KST20-2 -05KST20-2D KST20-2 -05
Electrical connectionGL Lead wire & lamp
GLS Lead wire + lamp & surge suppressor
G Lead wireD DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
GU Lamp with 90°plug(400mm)GP Lamp with 180°plug(400mm)
DEXT4 Explosion proofM DIN coil + Metal DIN connector
GL GLS G D / DUL Z / ZUL M
Lead wire & lamp
Lead wire + lamp & surge suppressor Lead wire
DIN coil +DIN connector(UL Approval)
DIN coil + DIN connector with lamp + Surge suppressor
(UL Approval)DIN coil + Metal DIN connector
GU GP DEXT4 LOCK
Lamp with 90°plug
Lamp with 180°plug
Level of explosion-proof 2G EEx m T42D IP65 T 130°
Explosion proof Manual operation
KCC Co., Ltd.
www.kccpr.com 533 -
PNEUMATIC & HYDRAULIC
Solenoid Valve
Reference Data
KT100KMF0100
KS105KMF0500
KS210KMF1000
KS320KMF2000
KS530KMF3000
KS640KMF4000
KS524
KS534
KS328
KS760
KS341KMF2341
KS342KMF2342
KPS542
KCAS
KJAS
KST
KST seriesSolenoid Valve(2, 3 Port Direct Acting)
KST 20 - D(Z)
Part no. Parts Material
1 Body AL
2 Plunger Spring SUS
3 Plunger Stainless Steel
4 Yoke SPC
5 Coil Ass'y CU & Others
6 Lock Nut Plastic Resin, Metal
7 Seat Plastic Resin
8 Button Metal
Structure
Dimensions
Non-locking push button
KCC Co., Ltd.
www.kccpr.com543 -
PNEUMATIC & HYDRAULIC KST seriesSolenoid Valve(2, 3 Port Direct Acting)
Station 2 3 4 5 6 7 8 9 10L1 38 62.5 87 111.5 136 160.5 185 209.5 234L2 53 77.5 102 126.5 151 175.5 200 224.5 249
Dimensions-Manifold Block Attached Type
Dimensions
KST 30 - GL
Non-locking push button
KCC Co., Ltd.
www.kccpr.com 553 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KS 3135 - 04 2 G
KS3135 series
Solenoid Valve(3 Port Direct Acting/Metal Seal)
Type KS 3135 G (Lead wire)
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2
Effective sectional areaSmm2(Cv)
Rc(PT) 3/8 37mm2(2.0)
Rc(PT) 1/2 43mm2(2.4)
Operating pressure 0~10kgf/cm2 (0~1MPa)
Max. operating frequency 5 cycle/secResponse time
{at 5kgf/cm2 (0.5MPa)} 30ms
Lubrication Not required
Power consumptionStarting 100/90VA (50/60Hz)
Holding 20/14VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient temperature -20 ~ 50
Fluid temperature 5 ~ 60
Coil insulation Class B
Weight 860g
KS3135 series
Speci cations
How to Order
Features
Direct acting type
Large capacity valve can be used in combination with large actuator.
Non-lubricated type and with dust proof metal sealing.
Due to the balance spool type neither of the ports being supplied with pressure will affect the valve operation.
Port size 03 3/804 1/2
Port typeNil Rc(PT)G G
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz
Symbol
KS3135-042GKS3135-042G
KCC Co., Ltd.
www.kccpr.com563 -
PNEUMATIC & HYDRAULIC KS3135 seriesSolenoid Valve(3 Port Direct Acting/Metal Seal)
Part no. Parts Material
1 Housing AL D/C
2 Coil CU & Others
3 Body AL D/C
4 Sleeve SUS
5 Spool SUS
6 Spool S/P Cover Plastic Resin
Structure
Dimensions
KCC Co., Ltd.
www.kccpr.com 573 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KS4000 series
KS4000 series
KS 4 1 30 - 04 2 G
Speci cations
How to Order
Features
Direct acting type
Large capacity valve can be used in combination with large actuator.
Non-lubrication type and with dust proof metal sealing.
Due to the balance spool type neither of the ports being supplied with pressure will affect the valve operation. .
Solenoid Valve(5 Port Direct Acting/Metal Seal)
Port size03 3/804 1/2
Port typeNil Rc(PT) (Standard)G G
Type KS4130 KS4230, KS4330, KS4430
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2Effective sectional
areaSmm2(Cv)
Rc(PT) 3/8 43mm2 (2.4)
Rc(PT) 1/2 49mm2 (2.72)
Operating pressure 0~10kgf/cm2 (0~1MPa)
Max. operating frequency 5 cycle/sec 3 cycle/sec Response time
{at 5kgf/cm2 (0.5MPa)} 30ms
Lubrication Not required
Power consumptionStarting 100/90VA (50/60Hz)
Holding 20/14VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient temperature -20 ~ 50
Fluid temperature 5 ~ 60
Coil insulation Class B
Weight 1,440g 1,830g
Voltage1 AC 100/110V (50/60Hz)2 AC 200/220V (50/60Hz)
FunctionFunction Symbol
1 Single acting
2 Double acting
3 Exhaust center
4 Closed center
ISO standard notation, 1:P, 2:B, 3:EB, 4:A, 5:EA.
KS4130-042G KS4230-042GKS4130-042G KS4230-042G
KCC Co., Ltd.
www.kccpr.com583 -
PNEUMATIC & HYDRAULIC KS4000 seriesSolenoid Valve(5 Port Direct Acting/Metal Seal)
Part no. Parts Material
1 Side Cover AL D/C
2 Body AL D/C
3 Sub Plate AL D/C
4 Sleeve SUS
5 Spool SUS
6 Sleeve Cover Plastic Resin
7 Coil CU & Others
8 Housing AL D/C
Part no. Parts Material
1 Housing AL D/C
2 Coil CU & Others
3 Body AL D/C
4 Sleeve SUS
5 Upper Cover AL D/C
6 Spool SUS
7 Spool Holder Plastic Resin
8 Sub Plate AL D/C
Structure
KS 4130- G
Dimensions
KS 4230- G
KS 4130 KS 4230
KCC Co., Ltd.
www.kccpr.com 593 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KSP 3135 - 03 1 G
KSP3135 series
Solenoid Valve(3 Port Pilot/Metal Seal)
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2
Effective sectional areaSmm2(Cv)
Rc(PT) 3/8 33mm2(1.8)
Rc(PT) 1/2 43mm2(2.4)
Operating pressure 1.5~10kgf/cm2 (0.15~1MPa)
Max. operating frequency
DC 3 cycle/sec
AC 5 cycle/secResponse time
{at 5kgf/cm2
(0.5MPa)}
DC 60ms
AC 30ms
Lubrication Not required
Manual override Non-locking push type
Power consumptionDC 4.6W
AC 13/10VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient temperature -10 ~ 50
Fluid temperature 5 ~ 60
Coil insulation Class F
Weight 650g
KSP3135 series
Speci cations
How to Order
Features
Pilot type
Large capacity valve, can be used in combination with large actuator.
Non-lubrication type and with dust proof metal sealing.
KSP3135-031G
Port size03 Rc(PT), G 3/804 Rc(PT), G 1/2
Function Nil Internal pilotR External pilot
Port typeNil Rc(PT) (Standard)G G
KSP3135-031G
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Symbol
KCC Co., Ltd.
www.kccpr.com603 -
PNEUMATIC & HYDRAULIC KSP3135 seriesSolenoid Valve(3 Port Pilot/Metal Seal)
Dimensions
Part no. Parts Material
1 Valve Ass'y [KO 307]
2 Adapter Plate AL D/C
3 Body AL D/C
4 Sleeve SUS
5 Spool SUS
6 Spool S/P Cover Plastic Resin
Structure
Internal Pilot (Port Sealing)
KCC Co., Ltd.
www.kccpr.com 613 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KSP 4 1 30 - 03 1 G
KSP4000 series
Solenoid Valve(5 Port Pilot/Metal Seal)
Type Single Double
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2
Effective sectional areaSmm2(Cv)
43mm2(2.39)
49mm2(2.72)
Operating pressure 1.5~10kgf/cm2 (0.15~1MPa)
Max. operating frequency
DC 3 cycle/sec
AC 5 cycle/sec 3 cycle/secResponse time
{at 5kgf/cm2
(0.5MPa)}
DC 60ms
AC 30ms
Lubrication Not required
Power consumptionDC 4.6W
AC 13/10VA (50/60Hz)
Manual override Non-locking push type
Allowable voltage ±10% rated voltage
Ambient temperature -10 ~ 50
Fluid temperature 5 ~ 60
Coil insulation Class F
Weight 1,280g 1,600g
KSP4000 series
Speci cations
How to Order
Features
Pilot type
Large capacity valve, can be used in combination with large actuator.
Non-lubrication type and with dust proof metal sealing.
KSP4130-031G KSP4230-031G
Port size03 3/8 04 1/2
Function Nil Internal PilotR External Pilot
KSP4130-031G KSP4230 031G
Voltage1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Function Function Symbol
1 Single acting
2 Double acting
ISO standard notation, 1:P, 2:B, 3:EB, 4:A, 5:EA.
Port type Nil Rc(PT) (Standard)G G
KCC Co., Ltd.
www.kccpr.com623 -
PNEUMATIC & HYDRAULIC KSP4000 seriesSolenoid Valve(5 Port Pilot/Metal Seal)
KSP 4130
Dimensions
Part no. Parts Material
1 Side Cover AL D/C
2 Body AL D/C
3 Sub Plate AL D/C
4 Sleeve SUS
5 Spool SUS
6 Sleeve Cover Plastic Resin
7 Adapter Plate AL D/C
8 Valve Ass'y [KO 307]
Part no. Parts Material
1 Valve Ass'y [KO 307]
2 Adapter Plate AL D/C
3 Body AL D/C
4 Sleeve SUS
5 Upper Cover AL D/C
6 Spool SUS
7 Spool Holder Plastic Resin
8 Sub Plate AL D/C
Structure
KSP 4130 - G KSP 4230 - D
Non-locking push button
External Pilot PortInternal Pilot (Port Sealing)
KCC Co., Ltd.
www.kccpr.com 633 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC KSP4000 seriesSolenoid Valve(5 Port Pilot/Metal Seal)
Dimensions
KSP 4230
Non-locking push button
2-Internal Pilot (Port Sealing)
Lead wire
Non-locking push button
2-External Pilot Port (PT 1/8)
KCC Co., Ltd.
www.kccpr.com643 -
PNEUMATIC & HYDRAULIC
Exhaust port2 Common exhaust port3 Individual exhaust port
Only for KO series.
K T 307 - 02 2 G - -
KT307 series
Solenoid Valve(3 Port Poppet/Universal Port)
KT307 series
How to Order
Features
A single valve with 6 valve functions. (Universal porting type) Continuous high frequency operation available. (Max.10C/S)
With the structure of a valve preventing xation and resistant to dust, it operates perfectly.
Burn proof structure, long service life.
Port typeNil Rc(PT) (Standard)G G
TypeT Direct attach typeO Manifold block attached type
Port size01 Rc(PT) 1/802 Rc(PT) 1/4
OptionNil Without mounting bracketB With mounting bracket
Voltage 1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Electrical entryG (Standard) Lead wire - 300mmD DIN coil + DIN connector
DUL DIN coil + DIN connector (UL Approval)
Z DIN coil + DIN connector with lamp + Surge suppressor
ZULDIN coil + DIN connector with
lamp + Surge suppressor(UL Approval)
Different wire length is available upon request.
Function Symbol
V
Vacuum + Air1Port - Vacuum
3Port - Air
Air + Vacuum1Port - Air
3Port - Vacuum
Function Function Symbol
Nil Air
V Vacuum
N.C
N.O
Number of valves on manifold block02 2 pcs03 3 pcs~ ~19 19 pcs20 20 pcs
Only for KO series.
KT307-022D KO series(Manifold block type)
Individual Exhaustion Common Exhaustion
KT307-02 2G KT307-022DKT307-022D
Bracket(Option)
KCC Co., Ltd.
www.kccpr.com 653 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 1/8, 1/4, G1/8, 1/4Effective sectional area
Smm2(Cv) 3.2mm2 (0.18)
Operating pressure
Air 0~9kgf/cm2 (0~0.9MPa)
Vacuum 10~760Torr (1kPa~100kPa abs.)
Max. operating frequency 10 cycle/sec
Allowable voltage ±10% rated voltage
Lubrication Not required
Speci cationsManual Override Non-locking push button
Power consumption
DC 4.6W
AC 13/10VA (50/60Hz)Response time
{at 5kgf/cm2 (0.5MPa)} 20ms
Ambient temperature -10 ~50
Fluid temperature 5 ~80
Coil insulation Class F
Weight 162g
KT307 seriesSolenoid Valve(3 Port Poppet/Universal Port)
Part no. Parts Material
1 Body AL D/C
2 Spool Spring SUS
3 Seat Metal
4 Spool Ass'y AL & Others
5 Stopper Pin Stainless Steel
6 Stopper Stainless Steel
7 Coil Ass'y CU & Others
8 Plunger Stainless Steel
9 Yoke SPC
10 Button Synthetic Rubber
StructureApplicationsType 3 Port Valve (N.C) 3 Port Valve (N.O)
Solenoid OFF
Solenoid ON
Type 2 Port Valve (N.C) 2 Port Valve (N.O)
Solenoid OFF
Solenoid ON
Type Selector Valve Divider Valve
Solenoid OFF
Solenoid ON
KCC Co., Ltd.
www.kccpr.com663 -
PNEUMATIC & HYDRAULIC
KT307 - D (Z)
(When bracket is applied)Manual button
Mounting bracket (Option)
Mounting hole
Mounting hole
Applicable wire diameter
Solenoid Valve(3 Port Poppet/Universal Port)
KT307 series
KT307 - G
Dimensions
Mounting hole
Mounting bracket (Option)
(When bracket is applied)Manual button
≥
KCC Co., Ltd.
www.kccpr.com 673 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC KMF307 series3 Port Manifold Block for KO307 Series
KMF307 Manifold Block
How to Order
Dimensions
Port size01 1/802 1/4
Exhaust port2 Common exhaust port3 Individual exhaust port
Station 2 2 Stations 6 6 Stations 10 10 Stations3 3 Stations 7 7 Stations 11 11 Stations4 4 Stations 8 8 Stations 12 12 Stations5 5 Stations 9 9 Stations
KMF307 - 01 - 4 2
Common ExhaustionKO307- -052
Station 2 3 4 5 ... 19 20L1 88 114 140 166 ... 530 556L2 62 88 114 140 ... 504 530
KMF307-01-42(Common Exhaustion)
KMF307-01-43(Individual Exhaustion) Manifold Block Accessory
Series
KMF307 3 port manifold block for KO307 series
Rc(PT) (Standard)
KMFG307 G
Manual button
Mounting hole
KMF307-01-43(Individual Exhaustion)
KCC Co., Ltd.
www.kccpr.com683 -
PNEUMATIC & HYDRAULIC
Dimensions
Individual ExhaustionKO307- -053
KMF307 series3 Port Manifold Block for KO307 Series
Manual button
Mounting hole
Station 2 3 4 5 ... 19 20L1 76 102 128 154 ... 518 544L2 64 90 116 142 ... 506 532
KCC Co., Ltd.
www.kccpr.com 693 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KT 317 - 02 2 - G
KT317 series
Solenoid Valve(3 Port Poppet/Universal Port)
Type G-Type D-Type
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 1/4, 3/8, G 1/4, 3/8Effective sectional area
Smm2(Cv) 11mm2 (0.6)
Operating pressure
Air 0~9kgf/cm2 (0~0.9MPa)
Vacuum 10~760Torr (1kPa~100kPa abs.)
Max. operating frequency 10 cycle/sec
Response time
(at 5kgf/cm2)
ON 7ms
OFF 6.5ms
Lubrication Not required
Manual Override Non-locking push button
Power consumption
DC 11W
AC 35/29VA (50/60Hz)
Allowable voltage ±10% rated voltage
Ambient temperature -10 ~50
Fluid temperature 5 ~80
Coil insulation Class F
Weight 420g 500g
KT317 series
Speci cations
How to Order
Features
A single valve with 6 valve functions. (Universal porting type) Continuous high frequency operation available. (Max. 10C/S) With the structure of a valve preventing xation and resistant to dust
, it operates perfectly. Burn proof structure, long service life.
Port typeNil Rc(PT) (Standard)G G
Port size02 1/403 3/8
Voltage 1 AC 100/110V 50/60Hz2 AC 200/220V 50/60Hz3 DC 24V4 DC 12V
Custom made with AC24V, AC48V, DC48V, DC100V is available.
Electrical connectionG (Standard) Lead wire - 300mmD DIN Connector
Different wire length is available upon request.
Function Function Symbol
Nil Air
V Vacuum
N.C
N.O
Function Symbol
WVacuum + Air
1Port - Vacuum3Port - Air
XAir + Vacuum
1Port - Air3Port - Vacuum
KT317-022-GKT317-022-G KT317-022-D
KCC Co., Ltd.
www.kccpr.com703 -
PNEUMATIC & HYDRAULIC KT317 seriesSolenoid Valve(3 Port Poppet/Universal Port)
Lead Wire (G-Type)
Part no. Parts Material
1 Body AL D/C
2 Housing Steel
3 Seat Metal
4 Stopper Stainless Steel
5 Plunger Stainless Steel
6 Coil Ass'y CU & Others
7 Spool AL & Others
8 Button Plastic Resin
Structure
Dimensions
Applications
Type 3 Port Valve (N.C) 3 Port Valve (N.O)
Solenoid OFF
Solenoid ON
Type 2 Port Valve (N.C) 2 Port Valve (N.O)
Solenoid OFF
Solenoid ON
Type Selector Valve Divider Valve
Solenoid OFF
Solenoid ON
Mounting hole
Mount at the base side
Manual button
KCC Co., Ltd.
www.kccpr.com 713 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC KT317 seriesSolenoid Valve(3 Port Poppet/Universal Port)
Dimensions
DIN Connector (D-Type)
Mounting hole
Applicable cable
Manual button
KCC Co., Ltd.
www.kccpr.com723 -
PNEUMATIC & HYDRAULIC
KA(B)V105 series
Air Operated Valve(5 Port Pilot/Non Lubricated)
Type S D
Fluid Air, Inert gas
Port size M5
External pilot port size M5Effective sectional area
Smm2(Cv) 3.6mm2 (0.2)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Max. operating frequency 5 cycle/sec
Ambient & uid temperature 5 ~ 60
Weight 54g 68g
KA(B)V105 series
K B V 105 S
Air supply direction B Vertical (Standard)A Horizontal
Speci cationss
How to Order
Features
Excellent durability with its non-lubricated type.
Easy to mount and to maintain with its light weight and small size. Fast response with its low pressure pilot.
Easy to install when horizontal type(KAV) or vertical type(KBV) is selected according to installation direction.
FunctionFunction Symbol
S Single acting
D Double acting
KBV105DKBV105SKBV105S KBV105D
KCC Co., Ltd.
www.kccpr.com 733 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC KA(B)V105 seriesAir Operated Valve(5 Port Pilot/Non Lubricated)
2 Position Single PilotKBV 105S
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Adapter Plate Metal
6 Piston Plastic Resin
7 Button Metal
Structure
Dimensions
2 Position Double PilotKBV 105D
Push buttonPush button
KCC Co., Ltd.
www.kccpr.com743 -
PNEUMATIC & HYDRAULIC
KA(B)V210 series
Type S D
Fluid Air, Inert gas
Port size Rc(PT) 1/8, G 1/8
External pilot port size M5Effective sectional area
Smm2(Cv) 12.6mm2 (0.6)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Max. operating frequency 5 cycle/sec
Ambient & uid temperature 5 ~ 60
Weight 100g 120g
KA(B)V210 series
K B V 210 S
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Easy to mount and to maintain with its light weight and small size.
Fast response with its low pressure pilot.
Easy to install when horizontal type(KAV) or vertical type(KBV) is selected according to installation direction.
Port type Nil Rc(PT) (Standard)G G
Air Operated Valve(5 Port Pilot/Non Lubricated)
Function Function Symbol
S Single acting
D Double acting
KBV210S KBV210DKBV210D
Air supply direction B Vertical (Standard)A Horizontal (Under development)
(Under development)
KCC Co., Ltd.
www.kccpr.com 753 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC KA(B)V210 seriesAir Operated Valve(5 Port Pilot/Non Lubricated)
2 Position Single PilotKBV 210S
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Adapter Plate Metal
6 Pistion Plastic Resin
7 Button Metal
Structure
Dimensions
2 Position Double PilotKBV 210D
Push ButtonPush Button
KCC Co., Ltd.
www.kccpr.com763 -
PNEUMATIC & HYDRAULIC
KA(B)V320 series
Type S D H / I / J
Fluid Air, Inert gas
Port size Rc(PT) 1/4, G 1/4
External pilot port size Rc(PT) 1/8Effective sectional area
Smm2(Cv) 19mm2 (1.0) 14mm2 (0.8)
Operating pressure 1.5~9kgf/cm2
(0.15~0.9MPa)2~9kgf/cm2
(0.2~0.9MPa)Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Max. operating frequency 5 cycle/sec 3 cycle/sec
Ambient & uid temperature 5 ~ 60
Weight 190g 240g 340g
KA(B)V320 series
K A V 320 S
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Easy to mount and to maintain with its light weight and small size.
Fast response with its low pressure pilot.
Easy to install when horizontal type(KAV) or vertical type(KBV) is selected according to installation direction.
Port type Nil Rc(PT)G G
Air supply direction A HorizontalB Vertical
Air Operated Valve(5 Port Pilot/Non Lubricated)
Function Function Symbol
S Single acting
D Double acting
H Closed center
I Pressure center
J Exhaust center
KA(B)V320S KA(B)V320D KA(B)V320HKA(B)V320H
KCC Co., Ltd.
www.kccpr.com 773 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC KA(B)V 320 seriesAir Operated Valve(5 Port Pilot/Non-Lubricated)
2 Position Double PilotKA(B)V 320D
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Adapter Plate Metal
Structure Dimensions
Dimensions
3Position Double(H,I,J) PilotKA(B)V 320H (I, J)
2 Position Single PilotKA(B)V 320S
Vertical type (KBV series)
Horizontal type (KAV series)
Vertical type (KBV series)
Horizontal type (KAV series)
Vertical type (KBV series)
Horizontal type (KAV series)
KCC Co., Ltd.
www.kccpr.com783 -
PNEUMATIC & HYDRAULIC
KA(B)V530 series
Type S D H / I / J
Fluid Air, Inert gas
Port size Rc(PT) 3/8, G 3/8
External pilot port size Rc(PT) 1/8Effective sectional area
Smm2(Cv) 45mm2 (2.5) 38mm2 (2.1)
Operating pressure 1.5~9kgf/cm2
(0.15~0.9MPa)2~9kgf/cm2
(0.2~0.9MPa)Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Max. operating frequency 5 cycle/sec 3 cycle/sec
Ambient & uid temperature 5 ~ 60
Weight 310g 380g 420g
KA(B)V530 series
K A V 530 S
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Large capacity valve, suitable for large actuator.
Fast response with its low pressure pilot.
Easy to install when horizontal type(KAV) or vertical type(KBV) is selected according to installation direction.
Port type Nil Rc(PT)G G
Air supply direction A HorizontalB Vertical
Air Operated Valve(5 Port Pilot/Non Lubricated)
Function Function Symbol
S Single acting
D Double acting
H Closed center
I Pressure center
J Exhaust center
KA(B)V530S KA(B)V530D KA(B)V530HKA(B)V530S KA(B)V530D KA(B)V530H
KCC Co., Ltd.
www.kccpr.com 793 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC KA(B)V530 seriesAir Operated Valve(5 Port Pilot/Non Lubricated)
2 Position Double PilotKA(B)V 530D
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Adapter Plate Metal
Structure Dimensions
Dimensions
3Position Double(H,I,J) Pilot KA(B)V 530H(I, J)
2 Position Single PilotKA(B)V 530S
Vertical type (KBV series)
Horizontal type (KAV series)
Vertical type (KBV series)
Horizontal type (KAV series)
Vertical type (KBV series)
Horizontal type (KAV series)
KCC Co., Ltd.
www.kccpr.com803 -
PNEUMATIC & HYDRAULIC
KA(B)V640 series
Type S D H / I / J
Fluid Air, Inert gas
Port size Rc(PT) 1/2, G 1/2
External pilot port size Rc(PT) 1/8Effective sectional area
Smm2(Cv) 65mm2 (3.6) 50mm2 (2.8)
Operating pressure 1.5~9kgf/cm2
(0.15~0.9MPa)2~9kgf/cm2
(0.2~0.9MPa)Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Max. operating frequency 5 cycle/sec 3 cycle/sec
Ambient & uid temperature 5 ~60
Weight 440g 510g 750g
KA(B)V640 series
K A V 640 S
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Large capacity valve, suitable for large actuator.
Fast response with its low pressure pilot.
Easy to install when horizontal type(KAV) or vertical type(KBV) is selected according to installation direction.
Port type Nil Rc(PT) (Standard)G G
Air supply direction A HorizontalB Vertical
Air Operated Valve(5 Port Pilot/Non Lubricated)
Function Function Symbol
S Single acting
D Double acting
H Closed center
I Pressure center
J Exhaust center
KA(B)V640S KA(B)V640D KA(B)V640HKA(B)V640S KA(B)V640D KA(B)V640H
KCC Co., Ltd.
www.kccpr.com 813 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC KA(B)V640 seriesAir Operated Valve(5 Port Pilot/Non-Lubricated)
2 Position Single PilotKA(B)V 640S
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Adapter Plate Metal
Structure
Dimensions
Vertical type (KBV series)
Horizontal type (KAV series)
KCC Co., Ltd.
www.kccpr.com823 -
PNEUMATIC & HYDRAULIC KA(B)V640 seriesAir Operated Valve(5 Port Pilot/Non-Lubricated)
Dimensions
Dimensions
2 Position Double(H,I,J) PilotKA(B)V 640H(I,J,K)
2 Position Double PilotKA(B)V 640D
Vertical type (KBV series)
Horizontal type (KAV series)
Vertical type (KBV series)
Horizontal type (KAV series)
KCC Co., Ltd.
www.kccpr.com 833 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KA(B)V524 series (NAMUR Small type)
KA(B)V524 series
K A V 524 S
Speci cations
How to Order
Function Function Symbol
S Single acting
D Double acting
Features
Excellent durability with its non-lubricated type. Large capacity valve, can be used for large actuator. Fast response with its low pressure pilot. Easy to install when horizontal type(KAV) or vertical type(KBV) is
selected according to installation direction.
Port type Nil Rc(PT) (Standard)G G
Air supply direction A HorizontalB Vertical
Air Operated Valve(5 Port Pilot/Non Lubricated)
KA(B)V524S KA(B)V524DKA(B)V524SKA(B)V524S KA(B)V524DKA(B)V524D
Type S D
Fluid Air, Inert gas
Port size Rc(PT) 1/4, G1/4
External pilot port size Rc(PT) 1/8, G1/8Effective sectional area
Smm2(Cv) 19mm2 (1.0)
Operating pressure 0.15~0.9MPa (1.5~9kgf/cm2)
Pilot pressure 0.2~1.0MPa (2~10kgf/cm2)
Max. operating frequency 5 cycle/sec
Ambient & uid temperature 5 ~ 60Weight 192g 252g
KCC Co., Ltd.
www.kccpr.com843 -
PNEUMATIC & HYDRAULIC KA(B)V524 seriesAir Operated Valve(5 Port Pilot/Non Lubricated)
2 Position Single PilotKA(B)V 524S
Part no. Parts Material
1 Cover Plastic Resin
2 Body AL D/C
3 Spool Spring SUS
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Adapter Plate Metal
Structure
Dimensions
2 Position Double PilotKA(B)V 524D
Vertical type (KBV series)
Horizontal type (KAV series)
Vertical type (KBV series)
Horizontal type (KAV series)
KCC Co., Ltd.
www.kccpr.com 853 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KA(B)V534 series (NAMUR)
Type S D
Fluid Air, Inert gas
Port size Rc(PT) 1/4, G 1/4
External pilot port size Rc(PT) 1/8Effective sectional area
Smm2(Cv) 35mm2 (2.0)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Max. operating frequency 5 cycle/sec
Ambient & uid temperature 5 ~ 60
Weight 270g 320g
KA(B)V534 series
K A V 534 S
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Large capacity valve, suitable for large actuator.
Fast response with its low pressure pilot.
Easy to install when horizontal type(KAV) or vertical type(KBV) is selected according to installation direction.
Port type Nil Rc(PT) (Standard)G G
Air supply direction A HorizontalB Vertical
Air Operated Valve(5 Port Pilot/Non Lubricated)
Function Function Symbol
S Single acting
D Double acting
KA(B)V534S KA(B)V534DKA(B)V534SKA(B)V534S KA(B)V534DKA(B)V534D
KCC Co., Ltd.
www.kccpr.com863 -
PNEUMATIC & HYDRAULIC KA(B)V534 seriesAir Operated Valve(5 Port Pilot/Non Lubricated)
2 Position Single PilotKA(B)V 534S
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Adapter Plate Metal
Structure
Dimensions
2 Position Double PilotKA(B)V 534D
Vertical type (KBV series)
Horizontal type (KAV series)
Vertical type (KBV series)
Horizontal type (KAV series)
KCC Co., Ltd.
www.kccpr.com 873 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KA(B)V341 series
Type S / O D
Fluid Air, Inert gas
Port size Rc(PT) 1/8, G 1/8
External pilot port size M5Effective sectional area
Smm 2(Cv) 12.6mm 2 (0.6)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Max. operating frequency 5 cycle/sec
Ambient & uid temperature 5 ~ 60
Weight 78g 102g
KA(B)V341 series
K B V 341 S
Speci cations
How to Order
Function Function Symbol
S Single acting
O Normally Open
D Double acting
Features
Excellent durability with its non-lubricated type.
Easy to mount and to maintain with its light weight and small size.
Fast response with its low pressure pilot.
Easy to install when horizontal type(KAV) or vertical type(KBV) is selected according to installation direction.
Port type Nil Rc(PT) (Standard)G G
Air supply direction B VerticalA Horizontal (Under development)
Air Operated Valve(3 Port Pilot/Non-Lubricated)
KBV341S KBV341DKBV341S KBV341D
(Under development)
KCC Co., Ltd.
www.kccpr.com883 -
PNEUMATIC & HYDRAULIC KA(B)V341 seriesAir Operated Valve(3 Port Pilot/Non-Lubricated)
3 Position Single PilotKBV 341S
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Adapter Plate Metal
6 Piston Plastic Resin
7 Button AL
Structure
Dimensions
3 Position Double PilotKBV 341D
Push Button
Push Button
KCC Co., Ltd.
www.kccpr.com 893 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KA(B)V342 series
Type S / O D
Fluid Air, Inert gas
Port size Rc(PT) 1/4, G 1/4
External pilot port size Rc(PT) 1/8Effective sectional area
Smm2(Cv) 19mm2 (1.0)
Operating pressure 1.5~9kgf/cm2 (0.15~0.9MPa)
Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Max. operating frequency 5 cycle/sec
Ambient & uid temperature 5 ~ 60
Weight 170g 220g
KA(B)V342 series
K A V 342 S
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Easy to mount and to maintain with its light weight and small size.
Fast response with its low pressure pilot.
Easy to install when horizontal type(KAV) or vertical type(KBV) is selected according to installation direction.
Port type Nil Rc(PT) (Standard)G G
Air Operated Valve(3 Port Pilot/Non Lubricated)
Function Function Symbol
S Single acting
O Normally Open
D Double acting
KA(B)V342S KA(B)V342DKA(B)V342S KA(B)V342D
Air supply direction A HorizontalB Vertical
KCC Co., Ltd.
www.kccpr.com903 -
PNEUMATIC & HYDRAULIC KA(B)V342 seriesAir Operated Valve(3 Port Pilot/Non Lubricated)
3 Position Single PilotKA(B)V 342S
Part no. Parts Material
1 Cover Metal
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Adapter Plate Metal
Structure
Dimensions
3 Position Double PilotKA(B)V 342D
Vertical type (KBV series)
Horizontal type (KAV series)
Vertical type (KBV series)
Horizontal type (KAV series)
KCC Co., Ltd.
www.kccpr.com 913 -
Pneumatic Solenoid
Valve
KS3135
KS4000
KSP3135
KSP4000
KT307KMF307
KT317
KA(B)V105
KA(B)V210
KA(B)V320
KA(B)V530
KA(B)V640
KA(B)V524
KA(B)V534
KA(B)V341
KA(B)V342
KPA(B)542
PNEUMATIC & HYDRAULIC
KPA(B)542 series
KPA(B)542 series
KP A 542 - 03
Speci cations
How to Order
Features
A single valve with 6 valve functions. (Universal porting type)
With the structure of a valve preventing xation and resistant to dust it operates perfectly.
Possible to use in vacuum
KPA542-03 KPB542-03
Air supply directionA Horizontal (Standard)B Vertical
Port typeNil Rc(PT) (Standard)G G
Air Operated Valve(3 Port Poppet/Non Lubricated)
Port size03 Rc(PT), G 3/8 (Standard)
KPA542-03
External Pilot(Horizontal) 1/8
KPB542-03KPB542 03
External Pilot(Vertical) 1/8
Refer to KPS542 series for applications.
When using external pilot type in vacuum, only KPA type is applicable.
Funtion Funtion Symbol
Nil(N.C, N.O
compatible)
N.C
N.O
Fluid Air, Inert gas
Port size Rc(PT) 3/8, G 3/8
External pilot port size Rc(PT) 1/8Effective sectional area
Smm 2(Cv) 45mm 2 (2.4)
Operating pressureInternal Pilot 2.0~8.0kgf/cm 2 (0.2~0.8MPa)
External Pilot -1.0~2.0kgf/cm 2(-0.1~0.2MPa)
Pilot pressure Identical to operating pressure (Min. 2kgf/cm 2, 0.2MPa)
Max. operating frequency 5 cycle/sec
Ambient & uid temperature 5 ~60
Weight 290g
KCC Co., Ltd.
www.kccpr.com923 -
PNEUMATIC & HYDRAULIC KPA(B)542 seriesAir Operated Valve(3 Port Poppet/Non Lubricated)
2 Position Single PoppetKPA 542
Part no. Parts Material
1 Cover Plastic Resin
2 Spool Spring SUS
3 Body AL D/C
4 Spool Ass'y AL & others
5 Pilot Plastic Resin
6 Piston Plastic Resin
7 Adapter plate Zn D/C
Structure Dimensions
(External pilot port)
(Mounting hole)
(Mounting hole)
Switching mark
KCC Co., Ltd.
www.kccpr.com 933 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
KSA 31 3 5 - 03
KSA3135 series
Solenoid Valve(3 Port Direct Acting/Metal Seal)
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 3/8, 1/2, G 3/8, G1/2
Pilot port size Rc(PT) 1/8
Effective sectional areaSmm2(Cv)
Rc(PT) 3/8 37mm2(2.0)
Rc(PT) 1/2 43mm2(2.4)
Operating pressure 0~10kgf/cm2 (0~1MPa)
Pilot pressure 1~10kgf/cm2 (0.1~1MPa)
Max. operating frequency 5 cycle/sec
Lubrication Not required
Manual override Non-locking push type (Option)
Ambient temperature -20 ~ 50
Fluid temperature 5 ~ 60
Weight 510g
KSA3135 series
Speci cations
How to Order
Features
Direct acting type.
Large capacity valve can be used for large actuator.
Non-lubrication type and with dust proof metal sealing.
Port size03 Rc(PT), G 3/804 Rc(PT), G 1/2
Body nominal size3 3/8
Symbol
Port type Nil Rc(PT) (Standard)G G
KSA3135-03KSA3135-03KSA3135
KCC Co., Ltd.
www.kccpr.com943 -
PNEUMATIC & HYDRAULIC KSA3135 seriesSolenoid Valve(3 Port Direct Acting/Metal Seal)
Part no. Parts Material
1 Adapter Plate AL D/C
2 Sleeve Cover Plastic Resin
3 Spool SUS
4 Sleeve SUS
5 Body AL D/C
6 Spool S/P Cover Plastic Resin
Structure
Dimensions
KCC Co., Ltd.
www.kccpr.com 953 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
Function Function Symbol
1 Single acting
2 Double acting
ISO standard notation, 1:P, 2:B, 3:EB, 4:A, 5:EA.
KSA4000 series
KSA4000 series
KSA 4 1 30 - 03
Speci cations
How to Order
Features
Direct acting type
Large capacity valve can be used for large actuator.
Non-lubricated type and with dust proof metal sealing.
Due to the balance spool type neither of the ports being supplied with pressure will affect the valve operation.
Body nominal size 30 3/8
Air Operated Valve(5 Port Direct Acting/Metal Seal)
Port size03 Rc(PT), G 3/804 Rc(PT), G 1/2
Type KSA4130 KSA4230
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2
External pilot port size Rc(PT) 1/8Effective sectional
areaSmm2(Cv)
Rc(PT) 3/8 43mm2 (2.4)
Rc(PT) 1/2 49mm2 (2.72)
Operating pressure 0~10kgf/cm2 (0~1MPa)
Pilot pressure 1~10kgf/cm2 (0.1~1MPa)
Max. operating frequency 5 cycle/sec 3 cycle /sec
Lubrication Not required
Manual override Non-locking push type (Option)
Ambient temperature -20 ~ 50
Fluid temperature 5 ~ 60
Weight 750g 860g
Port typeNil Rc(PT) (Standard)G G
KSA4130-03 KSA4230-03KSA4230-03KSA4230 03KSA4130-03KSA4130 03
KCC Co., Ltd.
www.kccpr.com963 -
PNEUMATIC & HYDRAULIC KSA4000 seriesAir Operated Valve(5 Port Direct Acting/Metal Seal)
Part no. Parts Material
1 Side Cover AL D/C
2 Spool Cushion Plastic Resin
3 Body AL D/C
4 Sleeve SUS
5 Upper Cover AL D/C
6 Spool SUS
7 Sleeve Cover Plastic Resin
8 Adapter Plate Connecting Cover Plastic Resin
9 Adapter Plate AL D/C
10 Sub Plate AL D/C
Part no. Parts Material
1 Adapter Plate AL D/C
2 Sleeve Cover Plastic Resin
3 Body AL D/C
4 Sleeve SUS
5 Upper Cover AL D/C
6 Spool SUS
7 Spool Holder Plastic Resin
8 Adapter Plate Connecting Cover Plastic Resin
9 Sub Plate AL D/C
Structure
KSA 4130
Dimensions
KSA 4230
KSA4130 KSA4230
KCC Co., Ltd.
www.kccpr.com 973 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
KTA307 series
Air Operated Valve(3 Port Poppet/Universal Port)
Type Air Vacuum
Fluid Air, Vacuum, Inert gas
Port size Rc(PT) 1/8, 1/4, G 1/8, 1/4Effective sectional area
Smm 2(Cv) 3.2mm 2 (0.18)
Operating pressure 0~10kgf/cm2 (0~1MPa)
10~760Torr(1 ~100kPa abs.)
Pilot pressure 2~10kgf/cm2 (0.2~1MPa)
Pilot port size 1/8
Lubrication Not required
Ambient temperature -10 ~ 50
Fluid temperature 5 ~ 80
Weight 140g
KTA307 series
Speci cations
How to Order
Features
A single valve with 6 valve functions. (Universal porting type) With the structure of a valve preventing xation and resistant to dust,
it operates perfectly. Possible to use in vacuum.
B port can be accessed if the plug in B port is inserted into A port.
Air supply directionA VerticalB Horizontal
Port typeNil Rc(PT) (Standard)G G
Port size01 1/802 1/4
OptionNil Without mounting bracketB With mounting bracket
FunctionFunction Symbol
Nil Air
V Vacuum
N.C1(P)
2(A)
3(R)
Air
Vacuum PumpSuction Strainer
1 2
N.O1(P)
2(A)
3(R)
Vacuum Actuator
Vacuum PumpSuction Strainer
Air
1 2
K T A 307 V - 02 - -
TypeT Direct attach typeO Manifold block attached type
Number of valves on manifold block02 2 pcs03 3 pcs~ ~19 19 pcs20 20 pcs
Exhaust port2 Common exhaust port3 Individual exhaust port
Function Symbol
V
Vacuum + Air1Port - Vacuum
3Port - Air1(P)
2(A)
3(R)
Actuator
Air Compressor
Vacuum Compressor
Air
1 2
Air + Vacuum1Port - Air
3Port - Vacuum1(P)
2(A)
3(R)
Actuator
Air Compressor
VacuumCompressor
Air
1 2
KTA307-02 Individual ExhaustionKTA307-02-B-043 KTA307-02-B-052
Common ExhaustionIndividual Exhaustion Common ExhaustionKTA307-02
Bracket (Option)
Air Pilot Port (Standard)
KCC Co., Ltd.
www.kccpr.com983 -
PNEUMATIC & HYDRAULIC KTA307 seriesAir Operated Valve(3 Port Poppet/Universal Port)
Part no. Parts Material
1 Spool Spring SUS
2 Seat Metal
3 Body AL D/C
4 Spool Ass'y AL & Others
5 Piston Metal
6 Piston Rod Metal
7 Housing Metal
8 Piston Packing Metal
Structure
Dimensions
ApplicationsType 3 Port Valve (N.C) 3 Port Valve (N.O)
Solenoid OFF
Solenoid ON
Type 2 Port Valve (N.C) 2 Port Valve (N.O)
Solenoid OFF
Solenoid ON
Type Selector Valve Divider Valve
Solenoid OFF
Solenoid ON
Mounting hole
Mounting bracket (Option)
(When bracket is applied)
KCC Co., Ltd.
www.kccpr.com 993 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KTA307 seriesAir Operated Valve(3 Port Poppet/Universal Port)
Dimensions
Common Exhaust PortKTA307- -052
Individual Exhaust Port KTA307- -053
Station 2 3 4 5 6 7 ... 19 20L1 76 102 128 154 180 206 ... 518 544L2 64 90 116 142 168 194 ... 506 532
Station 2 3 4 5 6 7 ... 19 20L1 88 114 140 166 192 218 ... 530 556L2 62 88 114 140 166 192 ... 504 530
KCC Co., Ltd.
www.kccpr.com1003 -
PNEUMATIC & HYDRAULIC
KTA 317 - 02
KTA317 series
Air Operated Valve(3 Port Poppet/Universal Port)
Type Air Vacuum
Fluid Air, Vacuum
Port size Rc(PT) 1/4, 3/8, G 1/4, 3/8Effective sectional area
Smm2(Cv) 11mm2 (0.6)
Operating pressure 0~10kgf/cm2 (0~1MPa)
10~760 Torr (1~100kPa abs.)
Pilot pressure 1~10kgf/cm2 (0.1~1MPa)
External pilot port size 1/8
Lubrication Not required
Ambient temperature -10 ~50
Fluid temperature 5 ~80
Weight 200g
KTA317 series
Speci cations
How to Order
Features
A single valve with 6 valve functions. (Universal porting type) With the structure of a valve preventing xation and resistant to dust,
it operates perfectly. Possible to use in vacuum.
Port typeNil Rc(PT) (Standard)G G
Port size02 1/403 3/8
KTA317-02 KTA317 02
FunctionFunction Symbol
Nil Air
V Vacuum
N.C1(P)
2(A)
3(R)
Air
Vacuum PumpSuction Strainer
1 2
N.O1(P)
2(A)
3(R)
Vacuum Actuator
Vacuum PumpSuction Strainer
Air
1 2
Function Symbol
V
Vacuum + Air1Port - Vacuum
3Port - Air1(P)
2(A)
3(R)
Actuator
Air Compressor
Vacuum Compressor
Air
1 2
Air + Vacuum1Port - Air
3Port - Vacuum1(P)
2(A)
3(R)
Actuator
Air Compressor
VacuumCompressor
Air
1 2
KCC Co., Ltd.
www.kccpr.com 1013 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KTA317 seriesAir Operated Valve(3 Port Poppet/Universal Port)
Part no. Parts Material
1 Body AL D/C
2 Housing Metal
3 Seat Metal
4 Spool Spring SUS
5 Spool Ass'y AL & Others
6 Piston Plastic Resin
7 Piston Guide SUM24
Structure
Dimensions
ApplicationsType 3 Port Valve (N.C) 3 Port Valve (N.O)
Solenoid OFF
Solenoid ON
Type 2 Port Valve (N.C) 2 Port Valve (N.O)
Solenoid OFF
Solenoid ON
Type Selector Valve Divider Valve
Solenoid OFF
Solenoid ON
Mounting hole
Exhaust slot
Mount at the base side
KCC Co., Ltd.
www.kccpr.com1023 -
PNEUMATIC & HYDRAULIC
KOR/KAND series
KOR/KAND series
KOR 01 - 01 KAND 01 - 01
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Relay valves to control pneumatic signal lines.
KOR type - 3 port check valve with one output and 2 pneumatic input ports. Output always supplied by high pressure inlet.
KAND type - 3 port valve with one output and 2 pneumatic input ports. Only when both input ports are supplied with air, the air ows to the output port. When air pressure differs, pressure in the lower amount ows to the output port.
KOR01-01OR (SHUTTLE) VALVE
KAND01-01AND VALVE
Logic Valve
Port typeNil Rc(PT)(Standard)G G
Port size 01 Rc(PT) 1/802 Rc(PT) 1/4
Body nominal size01 Rc(PT) 1/8 (16mm)02 Rc(PT) 1/4 (20mm)
Symbol
KOR
KAND
KAND01-01AND VALVEKAND01 01KOR01-01
OR (SHUTTLE) VALVKOR01 01
Type KOR01-01 KOR02-02 KAND01-01
Fluid Air, Inert gas
Proof pressure 15kgf/cm 2 (1.5MPa)
Operating pressure 1~10kgf/cm 2 (0.1~1MPa)Optimum operating pressure differential 0.5kgf/cm 2 (50kPa)
Ambient & uid temperature 5 ~ 60
Port size Rc(PT)1/8 Rc(PT)1/4 Rc(PT)1/8
Effective sectional area 9mm2 9mm2 9.9mm2
Weight 54g 62g 60g
KCC Co., Ltd.
www.kccpr.com 1033 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KOR/KAND seriesLogic Valve
KOR KAND
Structure
KOR 01- 01
KAND 01-01
Dimensions
KOR 02-02
Part no. Parts Material
1 Body AL
2 Rod SUS
3 Cover CU
4 Packing NBR
5 Washer SUS
Part no. Parts Material
1 Body AL
2 Packing Guide CU
3 Cover CU
4 Packing NBR
5 Packing Cover CU
KCC Co., Ltd.
www.kccpr.com1043 -
PNEUMATIC & HYDRAULIC
KACV series
KACV series
KACV 2000 - 01
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Large capacity valve can be used for large actuator.
Quick response time with low cracking pressure.
Check Valve
Bore size Port size
2000 ø2001 Rc(PT), G 1/802 Rc(PT), G 1/4
4000 ø3203 Rc(PT), G 3/804 Rc(PT), G 1/2
6000 ø4006 Rc(PT), G 3/410 Rc(PT), G 1
Port typeNil Rc(PT) (Standard)G G
Type KACV2000-01 KACV2000-02 KACV4000-03 KACV4000-04 KACV6000-06 KACV6000-10
Fluid Air
Proof pressure 15kgf/cm2 (1.5MPa)
Operating pressure 0.3~10kgf/cm2 (0.03~1MPa)
Ambient & uid temperature 5 ~ 60
Port size Rc(PT) 1/8 Rc(PT) 1/4 Rc(PT) 3/8 Rc(PT) 1/2 Rc(PT) 3/4 Rc(PT) 1
Effective sectional area 28mm2 94mm2 110mm2 220mm2 250mm2
Weight 40g 170g 870g
Symbol
KACV2000-01 KACV4000-04 KACV6000-10KACV2000 01
KCC Co., Ltd.
www.kccpr.com 1053 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KACV seriesCheck Valve
Structure
Dimensions
Part no. Parts Material
1 Inlet Cover AL
2 Seat O-Ring NBR
3 Body AL
4 Outlet Cover AL
5 Seat POM
6 Return Spring Stainless Steel
7 Cover O-Ring NBR
KACV 4000 - 03, 04KACV 2000 - 01, 02
KACV 6000 - 06, 10
KCC Co., Ltd.
www.kccpr.com1063 -
PNEUMATIC & HYDRAULIC
KVM100 series
KVM100 series
KVM 1 2 0 - 01 - 30
How to Order
2, 3 Port Mechanical Valve
KVM120-01-00M120-01-00 KVM121-01-01KVM121-01-01 KVM121-01-02SVM121-01-02S KVM120-01-30-RM120-01-30-R KVM120-01-33-GVM120-01-33-G KVM120-01-34KVM120-01-34
Model KVM 120(1)-01-00 KVM 121-01-01(S) KVM 121-01-02(S) KVM 120-01-30 -33 KVM 120-01-34
Symbol
Model KVM 130(1)-01-00 KVM 131-01-01(S) KVM 131-01-02(S) KVM 130-01-30 -33 KVM 130-01-34
Symbol
Operating Point of Mechanical Valve
P.T. : Working distance from the free position to the operating position of the actuator.O.T. : Working distance from the operating position to the operating limit of the actuator.T.T. : Working distance from the free position to the operating limit of the actuator.F.O.F. : Force required by actuator to move from the free position to the operating limit of the operating.
Speci cationsFluid Compressed air
Port size Rc(PT) 1/8, G 1/8Effective sectional area
Smm2(Cv) 2.5mm2 (0.14)
Operating pressure 0~9.9kgf/cm2 (0~0.99MPa)
Lubrication Not required
Ambient temperature 0 ~60
Weight (Standard type) 98g
Port typeNil Rc(PT) (Standard)G G
Number of ports 2 2 Port3 3 Port
Stem typeStem type
Type of actuator0 1
Long stem Short stem000102303334
Type of actuator00 Standard01 Roller lever01 S Roller lever (Hard steel roller)02 One-way lever02 S One-way lever (Hard steel roller)30 R Push button-Red30 G Push button-Green33 R Push button-Red (Flat type)33 G Push button-Green (Flat type)34 Selector-Black
KCC Co., Ltd.
www.kccpr.com 1073 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KVM100 series
Structure
2, 3 Port Mechanical Valve
Part no. Parts Material
1 Body AL
2 Stem POM
3 Upper Seat Spring SUS
4 Bracket AL
5 Seat POM
6 Lower Seat Spring SUS
7 Seat Packing NBR
Model (L) (A)KVM120-01-00KVM130-01-00 32.5 7.5
KVM121-01-00KVM131-01-00 28.5 3.5
Dimensions
KVM 121-01-01, KVM 121-01-01S, KVM 131-01-01, KVM 131-01-01S
KVM 120-01-00, KVM 121-01-00, KVM 130-01-00, KVM 131-01-00
At 5kgf/cm2 F.O.F. 2.0kgfP.T. 1.5mmO.T. 1.5mmT.T 3.0mm
At 5kgf/cm2 F.O.F. 1.2kgfP.T. 3.2mmO.T. 2.3mmT.T 5.5mm
Standard
Roller Lever
(Only for 3 port type)
(Only for 3 port type)POM or Hard Steel Roller
KCC Co., Ltd.
www.kccpr.com1083 -
PNEUMATIC & HYDRAULIC KVM100 series
At 5kgf/cm2 F.O.F. 2.5kgfP.T. 6.0mmO.T. 1.6mmT.T 7.6mm
Dimensions
At 5kgf/cm2 F.O.F. 1.2kgfP.T. 3.2mmO.T. 2.3mmT.T 5.5mm
At 5kgf/cm2 F.O.F. 2.5kgfP.T. 6.0mmO.T. 1.6mmT.T 7.6mm
KVM 121-01-02, KVM 121-01-02S, KVM 131-01-02, KVM 131-01-02S
KVM 120-01-30R, G, KVM 130-01-30R, G
KVM 120-01-33R, G, KVM 130-01-33R, G
2, 3 Port Mechanical Valve
Pannel Mounting Hole
Pannel Mounting Hole
One-Way Lever
Push Button
Push Button (Flat type)
(Only for 3 port type)
POM or Hard Steel Roller
(Only for 3 port type)
(Only for 3 port type)
KCC Co., Ltd.
www.kccpr.com 1093 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KVM100 series
Dimensions
At 5kgf/cm2 F.O.F. 1.8kgf
T.T 90
KVM 120-01-34, KVM 130-01-34
2, 3 Port Mechanical Valve
Pannel Mounting Hole
(Only for 3 port type)
Selector
KCC Co., Ltd.
www.kccpr.comwww.kccpr.com1103 -
PNEUMATIC & HYDRAULIC
KVM200 series
KVM200 series
KVM 2 3 0 - 02 - 01
How to Order
Port typeNil Rc(PT) (Standard)G G
Number of ports 2 2 Port3 3 Port
Stem type0 Standard type
Operating Point of Mechanical Valve
2, 3 Port Mechanical Valve
KVM 220-02-00KVM 220-02-00 KVM 230-02-01KVM 230-02-01 KVM 230-02-02 KVM 230-02-02 KVM 230-02-30RVM 230-02-30R KVM 230-02-33GVM 230-02-33G KVM 230-02-34KVM 230-02-34
Model 2 Port KVM 220-02-01(S) KVM 220-02-02(S) KVM 220-02-30 -33 KVM 220-02-34
Symbol
Model 3 Port KVM 230-02-01 KVM 230-02-02(S) KVM 230-02-30 -33 KVM 230-02-34
Symbol
P.T. : Working distance from the free position to the operating position of the actuator.O.T. : Working distance from the operating position to the operating limit of the actuator.T.T. : Working distance from the free position to the operating limit of the actuator.F.O.F. : Force required by actuator to move from the free position to the operating limit of the operating.
Speci cationsFluid Compressed air
Port size Rc(PT) 1/4, G 1/4Effective sectional area
Smm2(Cv) 19mm2 (1.0)
Operating pressure 0~9.9kgf/cm2 (0~0.99MPa)
Lubrication Not required
Ambient temperature 0 ~60
Weight(Standard type) 136g
Type of actuator00 Standard01 Roller lever01 S Roller lever (Hard steel roller)02 One-way lever02 S One-way lever (Hard steel roller)30 R Push button-Red30 G Push button-Green33 R Push button-Red (Flat type)33 G Push button-Green (Flat type)34 Selector-Black
KCC Co., Ltd.
www.kccpr.comwww.kccpr.com 1113 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KVM200 series
Structure
2, 3 Port Mechanical Valve
Part no. Parts Material
1 Rod AL
2 Rod Guide Metal
3 Body AL
4 Check Valve NBR
Dimensions
KVM 220-02-01, KVM 220-02-01S, KVM 230-02-01, KVM 230-02-01S
KVM 220-02-00, KVM 230-02-00
At 5kgf/cm2 F.O.F. 5.2kgfP.T. 3.0mmO.T. 2.0mmT.T 5.0mm
At 5kgf/cm2 F.O.F. 2.4kgfP.T. 6.5mmO.T. 4.5mmT.T 11mm
Standard
Roller Lever
(Only for 3 port type)
(Accessory mounting hole)
(Only for 3 port type)
or Hard Steel Roller
KCC Co., Ltd.
www.kccpr.comwww.kccpr.com1123 -
PNEUMATIC & HYDRAULIC KVM200 series
Dimensions
2, 3 Port Mechanical Valve
At 5kgf/cm2 F.O.F. 2.2kgfP.T. 7.0mmO.T. 5.0mmT.T 12mm
KVM 220-02-02, KVM 220-02-02S, KVM 230-02-02, KVM 230-02-02S
KVM 220-02-30R, G, KVM 230-02-30R, G
KVM 220-02-33, KVM 230-02-33
At 5kgf/cm2 F.O.F. 5.2kgfP.T. 4.9mmO.T. 1.6mmT.T 6.5mm
Pannel Mounting Hole
At 5kgf/cm2 F.O.F. 5.2kgfP.T. 4.9mmO.T. 1.6mmT.T 6.5mm
Pannel Mounting Hole
One-way Lever
Push Button
Push Button (Flat type)
(Only for 3 port type)
(POM or Hard Steel Roller)
(Only for 3 port type)
(Only for 3 port type)
KCC Co., Ltd.
www.kccpr.comwww.kccpr.com 1133 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KVM200 series
Dimensions
2, 3 Port Mechanical Valve
KVM 220-02-34, KVM 230-02-34
At 5kgf/cm2 F.O.F. 2.3kgf
T.T 90
Pannel Mounting Hole
Selector
(Only for 3 port type)
KCC Co., Ltd.
www.kccpr.com1143 -
PNEUMATIC & HYDRAULIC
KVMS230 series
KVMS230 series
KVMS 2 3 0 - 02 - 30
How to Order
Port typeNil Rc(PT) (Standard)G G
Number of ports 3 3 Port
Stem type0 Standard type
Operating Point of Mechanical Valve
3 Port Mechanical Valve
KVMS230-02-00VMS230-02-00 KVMS230-02-01VMS230-02-01 KVMS230-02-02VMS230-02-02 KVMS230-02-30-RVMS230-02-30-R KVMS230-02-33GMS230-02-33G KVMS230-02-34VMS230-02-34
Model KVMS 230-02-00 KVMS 230-02-01 KVMS 231-02-02(S) KVMS 230-02-30 -33 KVMS 230-02-34
Symbol
Speci cationsFluid Compressed air
Port size Rc(PT) 1/4, G 1/4Effective sectional area
Smm2(Cv) 19mm2 (1.0)
Operating pressure 0~9.9kgf/cm2 (0~0.99MPa)
Lubrication Not required
Ambient temperature 0 ~60
Weight(Standard type) 136g
P.T. : Working distance from the free position to the operating position of the actuator.O.T. : Working distance from the operating position to the operating limit of the actuator.T.T. : Working distance from the free position to the operating limit of the actuator.F.O.F. : Force required by actuator to move from the free position to the operating limit of the operating.
Type of actuator00 Standard01 Roller lever01 S Roller lever (Hard steel roller)02 One-way lever02 S One-way lever (Hard steel roller)30 R Push button-Red30 G Push button-Green33 R Push button-Red (Flat type)33 G Push button-Green (Flat type)34 Selector-Black
KCC Co., Ltd.
www.kccpr.com 1153 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KVMS230 series
Structure
3 Port Mechanical Valve
Part no. Parts Material
1 Rod AL
2 Rod Guide Metal
3 I-Ring AL
4 Spool NBR
5 Body AL D/C
Dimensions
KVMS 230-02-01, KVMS 230-02-01S
KVMS 230-02-00
At 5kgf/cm2 F.O.F. 5.2kgfP.T. 3.0mmO.T. 2.0mmT.T 5.0mm
At 5kgf/cm2 F.O.F. 2.4kgfP.T. 6.5mmO.T. 4.5mmT.T 11mm
NO
(Accessory mounting hole)
NO
NC
IN
OUT
NO
NC
IN
OUT
Standard
Roller Lever
KCC Co., Ltd.
www.kccpr.com1163 -
PNEUMATIC & HYDRAULIC KVMS230 series 3 Port Mechanical Valve
Dimensions
At 5kgf/cm2 F.O.F. 2.2kgfP.T. 7.0mmO.T. 5.0mmT.T 12mm
KVMS 230-02-02, KVMS 230-02-02S
KVMS 230-02-30R, G
KVMS 230-02-33
NO
NC
IN
OUT
NO
NC
IN
OUT
NO
NC
IN
OUT
At 5kgf/cm2 F.O.F. 5.2kgfP.T. 4.9mmO.T. 1.6mmT.T 6.5mm
At 5kgf/cm2 F.O.F. 5.2kgfP.T. 4.9mmO.T. 1.6mmT.T 6.5mm
One-Way Lever
Push Button
Push Button (Flat type)
Pannel Mounting Hole
Pannel Mounting Hole
KCC Co., Ltd.
www.kccpr.com 1173 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KVMS230 series 3 Port Mechanical Valve
Dimensions
KVMS 230-02-34
NO
NC
IN
OUT
At 5kgf/cm2 F.O.F. 2.3kgf
T.T 90
Selector
Pannel Mounting Hole
KCC Co., Ltd.
www.kccpr.com1183 -
PNEUMATIC & HYDRAULIC
KVM350 series
KVM 3 5 0 - 02 - 00
How to Order
Port typeNil Rc(PT) (Standard)G G
Number of ports 5 5 Port
Stem type0 Standard type
Operating Point of Mechanical Valve
5 Port Mechanical Valve
Model KVM 350-02-00 KVM 350-02-01(S) KVM 350-02-02(S) KVM 350-02-30 -33 KVM 350-02-34
Symbol
KVM350-02-00M350-02-00 KVM350-02-01M350-02-01 KVM350-02-02SM350-02-02S KVM350-02-30M350-02-30 KVM350-02-33VM350-02-33 KVM350-02-34M350-02-34
P.T. : Working distance from the free position to the operating position of the actuator.O.T. : Working distance from the operating position to the operating limit of the actuator.T.T. : Working distance from the free position to the operating limit of the actuator.F.O.F. : Force required by actuator to move from the free position to the operating limit of the operating.
Speci cationsFluid Compressed air
Port size Rc(PT) 1/4, G 1/4Effective sectional area
Smm2(Cv) 19mm2 (1.0)
Operating pressure 0~9.9kgf/cm2 (0~0.99MPa)
Lubrication Not required
Ambient temperature 0 ~60
Weight(Standard type) 260g
KVM350 series
Type of actuator00 Standard01 Roller lever01 S Roller lever (Hard steel roller)02 One-way lever02 S One-way lever (Hard steel roller)30 R Push button-Red30 G Push button-Green33 R Push button-Red (Flat type)33 G Push button-Green (Flat type)34 Selector-Black
KCC Co., Ltd.
www.kccpr.com 1193 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
Dimensions
KVM 350-02-01, KVM 350-02-01S
KVM 350-02-00
At 5kgf/cm2 F.O.F. 1.6kgfP.T. 1.0mmO.T. 2.0mmT.T 3.0mm
At 5kgf/cm2 F.O.F. 0.8kgfP.T. 2.2mmO.T. 4.0mmT.T 6.2mm
Structure
5 Port Mechanical Valve
Part no. Parts Material
1 Cover AL
2 Body AL
3 Spool AL
4 Pistion POM
5 Head Cover Metal
6 Spool Spring SUS
7 Spool I-Ring NBR
8 Pilot AL
9 Packing NBR
10 Stem Metal
Standard
Roller Lever
(Accessory mounting hole)
(Pilot exhaust port)
POM or Hard Steel Roller
(Pilot exhaust port)
KVM350 series
KCC Co., Ltd.
www.kccpr.com1203 -
PNEUMATIC & HYDRAULIC
Dimensions
At 5kgf/cm2 F.O.F. 0.7kgfP.T. 2.4mmO.T. 4.6mmT.T 7.0mm
KVM 350-02-02, KVM 350-02-02S
KVM 350-02-30
5 Port Mechanical Valve
At 5kgf/cm2 F.O.F. 2.1kgfP.T. 4.8mmO.T. 1.7mmT.T 6.5mm
KVM 350-02-33
At 5kgf/cm2 F.O.F. 2.1kgfP.T. 4.8mmO.T. 1.7mmT.T 6.5mm
Pannel Mounting Hole
Pannel Mounting Hole
One-way Lever
Push Button
Push Button (Flat type)
POM or Hard Steel Roller
(Pilot exhaust port)
(Pilot exhaust port)
(Pilot exhaust port)
KVM350 series
KCC Co., Ltd.
www.kccpr.com 1213 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
Dimensions
At 5kgf/cm2 F.O.F. 2.3kgf
T.T 90
KVM 350-02-34
5 Port Mechanical Valve
Pannel Mounting Hole
Selector
(Pilot exhaust port)
KVM350 series
KCC Co., Ltd.
www.kccpr.com1223 -
PNEUMATIC & HYDRAULIC
2 Port (K2P) 3 Port (K3P)
5 Port (K4P) 5 Port (K4PP)
K2P2 Port, N.C, Spring Return
K3P3 Port, N.C, Spring Return
K4P5 Port
K4PP5 Port, Holding
K series
Push Button Type Small Machenical Valve
K series
Speci cations Structure
Dimensions
Push Button Min. Operating ForceAir Pressure
Type 0.2 MPa 0.4 MPa 0.7 MPa
K2P N [kgf] 29.4[3](19.6[2])
44.1[4.5](21.6[2.2])
63.7[6.5](23.5[2.4])
K3P N [kgf] 19.6[2] 24.5[2.5] 29.4[3]
K4P N [kgf] 19.6[2] 21.6[2.2] 23.5[2.4]
K4PP N [kgf] 4.9[0.5] 5.9[0.6] 6.9[0.7]
Symbol
K2P K3P
K4P K4PPK3PK2P K3PK2P K4P K4PP
Type K2P K3P K4P K4PP
Fluid Air, Inert gas
Port size Male thread: Rc(PT)1/8, Female thread: M5×0.8 Effective sectional area
Smm2(Cv) 1.8(0.08) 2.5(0.12)
Operating pressure 0~9kgf/cm2 (0~0.9MPa)
Proof pressure 13.5kgf/cm2 (1.35MPa)Max. operating
frequency 5 cycle/sec
Lubrication Not required
Type of actuator Push button spring return
Double push button holding
Number of port 2 N/C 3 N/C 5
Stroke 2.4mm Pre-Stroke 0.8mm Main Stroke 0.8mm Over Stroke 0.8mm
Ambient & uid temperature 0 ~ 60
Accessory Lock Nut(110-21A) Lock Washer(100-35)
1 Each 2 Each
Weight 35g 30g 66g 71g
KCC Co., Ltd.
www.kccpr.com 1233 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
K series
Pin Lever Type Small Mechanical Valve
K series
Speci cations
Flow Rate Cylinder Operating Speed
How to Use1. The force acts from the top. (Vertical)2. Operating pressure is 0.5MPa.3. Uses a tube with a 4mm diameter and a 500mm length.
Symbol
K2V K2VR K3V K3VR
K4V K4VR K4PPXK2VRK2VRK2V KK2V K4V K4VR K4PPX
How to Read Graph:For a primary pressure 5kgf/cm2 (0.5MPa) and a flow rate 85 /min (ANR) the valve outlet pressure is 4kgf/cm2 (0.4MPa)
K3VRK3V
Type K2V K3V K2VR K3VR K4V K4VR K4PPX
Fluid Air, Inert gas
Port size Male thread: Rc(PT)1/8, Female thread: M5×0.8 Effective sectional area
Smm2(Cv) 1.8(0.08) 2.5(0.12)
Operating pressure 0~9kgf/cm2 (0~0.9MPa)
Proof pressure 13.5kgf/cm2 (1.35MPa)
Max. operating frequency 5 cycle/sec
Lubrication Not required
Type of actuatorPinned Lever
Holding type Spring return type Holding type Spring return type
Push-pull button holding type
Number of port 2 Port 3 Port 2 Port, N.C 3 Port, N.C 5 Port
Stroke Pre-Stroke 0.8mm
2.4mm Main Stroke 0.8mm Over Stroke 0.8mm
Ambient & uid temperature 0 ~ 60Accessory
Lock Nut(110-21A)Lock Washer(100-35)
1 Each
Weight 30g 66g 68g
KCC Co., Ltd.
www.kccpr.com1243 -
PNEUMATIC & HYDRAULIC
StructureK2V
2 Port, Pinned Lever Holding TypeK3V
3 Port, Pinned Lever Holding TypeK2VR
2 Port, Pinned Lever Spring Return TypeK3VR
3 Port, Pinned Lever Spring Return Type
K4V5 Port, Pinned Lever Holding Type
K4VR5 Port, Pinned Lever Spring Return Type
K4PPX5 Port, Push-Pull Button Holding Type
K2V2 Port, Pinned Lever Holding Type
K3V3 Port, Pinned Lever Holding Type
K2VR2 Port, Pinned Lever Spring Return Type
K3VR3 Port, Pinned Lever Spring Return Type
K4V5 Port, Pinned Lever Holding Type
K4VR5 Port, Pinned Lever Spring Return Type
K4PPX5 Port, Push-Pull Button Holding Type
Pin Lever Type Small Mechanical Valve
K series
Dimensions
KCC Co., Ltd.
www.kccpr.com 1253 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
KHP320 series
KHP320 series
KHP 320 D - 02 - B
Speci cations
How to Order
Hand Push Pull Valve
Port typeNil Rc(PT) (Standard)G G
OptionNil Without mounting bracketB With mounting bracket
Port size 01 Rc(PT) 1/8, G 1/802 Rc(PT) 1/4, G 1/4
Type S D AV / BV
Fluid Compressed air
Port size Rc(PT) 1/8, 1/4, G1/8, 1/4Effective sectional area
Smm2(Cv) 19mm2(1.0)
Operating pressure 0~9kgf/cm2 (0~0.9MPa)
Lubrication Not requiredAmbient & uid
temperature 0 ~ 60
Weight 210g 210g 260g
Features
Excellent durability with its non-lubricated type.
Minimized installing area with its small size.
Valve can be installed vertically by selecting bracket attached type.
KHP320S-02 KHP320D-02-B KHP320BV-02 Air supply directionHP320BV-02HP320D-02-BKHP320S-02Bracket only applicable for
KHP320S/D series. (Option:1 bracket, 2 mounting screws)
racket onl applic
Bracket(Option)
Ai l di ti
BV
AV
FunctionFunction Symbol
S Spring return
D Push pull
BV Air return (Standard)(Vertical air supply)
AV Air return (Custom made)(Horizontal air supply)
KCC Co., Ltd.
www.kccpr.com1263 -
PNEUMATIC & HYDRAULIC KHP320 seriesHand Push Pull Valve
KHP 320S-02-B
Structure
KHP 320BV-02
Part no. Parts Material
1 Cover Metal
2 Body AL D/C
3 Spool Ass'y AL & Others
4 Lever Stainless Steel
5 Guide Plastic Resin
6 Pilot Zn D/C
7 Lever Plate Zn D/C
8 Block Packing NBR
9 Knob Aluminium
10 Bracket SCP1
11 Piston Plastic Resin
12 Adapter Plate Zn D/C
Dimensions
KHP 320S - 02
KCC Co., Ltd.
www.kccpr.com 1273 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KHP320 seriesHand Push Pull Valve
KHP 320D - 02 - B
KHP 320BV - 02
Dimensions
KCC Co., Ltd.
www.kccpr.com1283 -
PNEUMATIC & HYDRAULIC
KHP342 series
KHP342 series
KHP 342 D - 02 - B
Speci cations
How to Order
Hand Push Pull Valve
Port typeNil Rc(PT) (Standard)G G
OptionNil Without mounting bracketB With mounting bracket
Port size 01 Rc(PT) 1/8, G 1/802 Rc(PT) 1/4, G 1/4
Type S D AV / BV
Fluid Compressed air
Port size Rc(PT) 1/8, 1/4, G1/8, 1/4Effective sectional area
Smm2(Cv) 19mm2(1.0)
Operating pressure 0~9kgf/cm2 (0~0.9MPa)
Lubrication Not requiredAmbient & uid
temperature 0 ~ 60
Weight 185g 185g 235g
FunctionFunction Symbol
S Spring Return
D Push Pull
BV Air return (Standard)(Vertical air supply)
AV Air return (Custom made)(Horizontal air supply)
KHP342S-02 KHP342D-02-B KHP342BV-02P342D-02-B HP342BV-02KHP342S-02 Air supply direction
Bracket only applicable for KHP320S/D series.
(Option:1 bracket, 2 mounting screws)
Bracket only ap
Bracket(Option)
BV
AV
Features
Excellent durability with its non-lubricated type. Minimized installing area with its small size.
Valve can be installed vertically by selecting bracket attached type.
KCC Co., Ltd.
www.kccpr.com 1293 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KHP342 seriesHand Push Pull Valve
KHP 342S-02-B
Structure
KHP 342BV-02
Part no. Parts Material
1 Cover Metal
2 Body AL D/C
3 Spool Ass'y AL & Others
4 Lever Stainless Steel
5 Guide Plastic Resin
6 Pilot Zn D/C
7 Lever Plate Zn D/C
8 Block Packing NBR
9 Knob Aluminium
10 Bracket SCP1
11 Piston Plastic Resin
12 Adapter Plate Zn D/C
Dimensions
KHP 342S - 02
KCC Co., Ltd.
www.kccpr.com1303 -
PNEUMATIC & HYDRAULIC KHP342 seriesHand Push Pull Valve
KHP 342D - 02 - B
KHP 342BV - 02
Dimensions
KCC Co., Ltd.
www.kccpr.com 1313 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
KHV320 series
KHV320 series
KHV 320 H - 02 - V
Speci cations
How to Order
Hand Valve
Port typeNil Rc(PT) (Standard)G G
Lever positionNil HorizontalV Vertical
Port size 01 1/802 1/4
Type S D H/ I/ J
Fluid Air, Inert gas
Port size Rc(PT) 1/8, 1/4, G1/8, 1/4Effective sectional area
Smm2(Cv) 19mm2(1.0) 14mm2(0.8)
Operating pressure 0~9kgf/cm2 (0~0.9MPa)
Lubrication Not requiredAmbient & uid
temperature 5 ~ 60
Applicable cylinder Ø32~Ø100
Weight 290g
Features
Excellent durability with its non-lubricated type.
Minimized installing area with its small size.
Easy to install if horizontal type(KAV) or Vertical type(KBV) is selected depending on installation direction.
FunctionFunction Symbol
S Single acting
D Double acting
SPRING RETURN TYPE DETENT TYPEFunction Symbol Function Symbol
H Closed center HD Closed
center
I Pressure center ID Pressure
center
J Exhaust center JD Exhaust
center
KHV320H-02KHV320H 02 KHV320H-02-VKHV320H-02-V
Manifold block (KMF2000-**) is sold separately
KCC Co., Ltd.
www.kccpr.com1323 -
PNEUMATIC & HYDRAULIC
KHV 320H(I, J) - 02 - V
KHV320 seriesHand Valve
Structure
Dimensions
KHV 320S - 02 - V
Part no. Parts Material
1 Cover Metal
2 Body AL D/C
3 Spool Ass'y AL & Others
4 Joint Stainless Steel
5 Guide Plastic Resin
6 Pilot Zn D/C
7 Block Zn D/C
8 Block Packing NBR
9 Lever Stainless Steel
10 Grip AL
KHV 320H-02 KHV 320H-02-V
KCC Co., Ltd.
www.kccpr.com 1333 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KHV320 seriesHand Valve
KHV 320S - 02
KHV 320H(I, J) - 02
Dimensions
KCC Co., Ltd.
www.kccpr.com1343 -
PNEUMATIC & HYDRAULIC
KHV530(V) series
KHV530(V) series
Speci cations
How to Order
Hand Valve
Port type Nil Rc(PT) (Standard)G G
Lever positionNil HorizontalV Vertical
Type S D H/ I/ J
Fluid Air, Inert gas
Port size Rc(PT) 3/8, G 3/8Effective sectional area
Smm2(Cv) 45mm2(2.5) 38mm2(2.1)
Operating pressure 0~9kgf/cm2 (0~0.9MPa)
Lubrication Not requiredAmbient & uid
temperature 5 ~ 60
Applicable cylinder ø32~ø125
Weight 470g
Features
Excellent durability with its non-lubricated type.
Large capacity valve can be used for large actuator.
Easy to install if horizontal type(KAV) or Vertical type(KBV) is selected
depending on installation direction.
KHV 530 H - V
FunctionFunction Symbol
S Single acting
D Double acting
SPRING RETURN TYPE DETENT TYPEFunction Symbol Function Symbol
H Closed center
HD Closed center
I Pressure center
ID Pressure center
J Exhaust center
JD Exhaust center
KHV530HKHV530H KHV530H-VKHV530H-V
Manifold block(KMF3000-**) is sold separately
KCC Co., Ltd.
www.kccpr.com 1353 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC KHV530(V) seriesHand Valve
Structure Structure
Part no. Parts Material
1 Cover Metal
2 Body AL D/C
3 Spool Ass'y AL & Others
4 Joint Stainless Steel
5 Guide Plastic Resin
6 Pilot Zn D/C
7 Block Zn D/C
8 Block Packing NBR
9 Lever Stainless Steel
10 Grip AL
KHV 530H(I, J) - V
Dimensions
KHV 530S-V
KHV 530H KHV 530H-V
KCC Co., Ltd.
www.kccpr.com1363 -
PNEUMATIC & HYDRAULIC KHV530(V) seriesHand Valve
KHV 530S
KHV 530H(I, J)
Dimensions
KCC Co., Ltd.
www.kccpr.com 1373 -
Pneumatic Solenoid
Valve
KSA3135
KSA4000
KTA307
KTA317
KORKAND
KACV
KVM100
KVM200
KVMS230
KVM350
K
KHP320
KHP342
KHV320
KHV530
KHV
PNEUMATIC & HYDRAULIC
KHV series
Type KHV200 KHV300 KHV400
Fluid Compressed air
Max. operating pressure 9.9kgf/cm2 (0.99MPa)
Proof pressure 15kgf/cm2 (1.5MPa)Effective sectional area
mm2(Cv) 7.5 (0.4) 20 (1.1) 55 (3.1)
Ambient & uid temperature 5 ~ 60
Operating angle 90
KHV series
KHV - 3 0 0 - 03
Speci cations
How to Order
Hand Valve
Port size Body size
2 3 402030406
Port typeNil Rc(PT) (Standard)G G
KHV-300-03KHV 300 03
Body size2 1/43 3/84 1/2
Piping & mounting method Piping Mounting method
0 Side Body1 Side Panel
1. P and R position can not be changed reciprocally when piping.
(Valve plate can be detached)
2. Ensure connection so that air is supplied to the port "P". Valve may have
air leakage when air pressure is supplied from other ports.
3. When the valve is installed in an atmosphere where there is a lot of dust,
install a silenscer into the port "R". If dust enters the valve from the
port "R", it may cause malfunction.
4. To stop the valve midway can cause malfunction. Switch the valve to
each position quickly and rmly.
Precautions
Position Position Symbol
0 3 Position
2 2 Position
KCC Co., Ltd.
www.kccpr.com1383 -
PNEUMATIC & HYDRAULIC KHV seriesHand Valve
Flow Characteristic
Model Port size Rc(PT) A B C D E F G G1 H I J K L M Weight
(g)KHV200 1/4 62 81.5 11.5 62 102 95 49 49 23 - 5.3 54 35 2-Ø6 570KHV300 3/8 74 94 13.5 74 115 122 62 62 27 18 6.3 66 41 4-Ø6 830KHV400-04 1/2 102 107 15 94 130 145 81 89 30 34 6.3 82 51 4-Ø7 1246KHV400-06 3/4 104 111 17 104 140 145 88 88 39 34 6.3 82 51 4-Ø7 1450
Dimensions
200 400 600 800 10000
1
3
2
4
5
6
7
8
9
9.9
1000 20000
1
3
2
4
5
6
7
8
9
9.9
2000 4000 60000
1
3
2
4
5
6
7
8
9
9.9
A
B
C
D
E
G1
L
M
K
F
G
4-J
H
I
Model Max. panel thicknessKHV200 3.5KHV300 3.5
KHV400-04 8.0KHV400-06 8.0
KCC Co., Ltd.
www.kccpr.com 1393 -
Pneumatic Solenoid
Valve
SFVM
KQE2000
SQE
KVHS
PNEUMATIC & HYDRAULIC
Number of Ports
2
2 Port SFVM 220-02(1/4)
3
3 Port SFVM 230-02(1/4)
55 Port SFVM 250-02(1/4) SFVM 250-03(3/8)
SFVM series
TypeSFVM-220-02 -230-02 -250-02
SFVM-250-03
Fluid Air
Port size Rc(PT) 1/4 Rc(PT) 3/8Effective sectional area
Smm2(Cv) 19mm 2 (1.0) 45mm 2 (2.4)
Operating pressure 10kgf/cm 2 (1MPa)
Ambient & uid temperature 0 ~ 60
Lubrication Not required
Weight 532g 650g
SFVM series
Speci cations
How to Order
SFVM 230-02
Foot Valve
Port size02 1/403 3/8
SFVM 250-02
Port typeNil Rc(PT) (Standard)G G
SFVM 2 3 0 - 02
KCC Co., Ltd.
www.kccpr.com1403 -
PNEUMATIC & HYDRAULIC SFVM seriesFoot Valve
Dimensions
SFVM220-02, SFVM 230-02
SFVM250-02
Rc(PT)3/8 Rc(PT)3/8
Rc(PT)3/8
SFVM250-03
KCC Co., Ltd.
www.kccpr.com 1413 -
PNEUMATIC & HYDRAULIC
Pneumatic Solenoid
Valve
SFVM
KQE2000
SQE
KVHS
KQE2000 series
KQE 2000 - 02 E
Speci cations
How to Order
Features
Excellent durability with its non-lubricated type.
Excellent air exhaust-charesteristic with optimal ow design.
Easy to mount and to maintain with light weight and small size
Silencer Nil Without silencerE With silencer
Port typeNil Rc(PT)(Standard)G G
Port size01 1/802 1/4
KQE2000 seriesQuick Exhaust Valve
Symbol
KQE2000-02
KQE2000-02EKQE2000-02 KQE2000-02E(With built-in silencer at the exhaust port)
KQE2000 02E
Type KQE2000-02 KQE2000-02E
Fluid Air, Inert gas
Port size Rc(PT) 1/8 Rc(PT) 1/4 Rc(PT) 1/8 Rc(PT) 1/4
Effective sectional area
Smm2(Cv)
IN-OUT 23(1.2) 29(1.6) 20(1.1) 27(1.5)
OUT-EX 29(1.6) 33(1.8) 27(1.5) 31(1.7)
Operating pressure 0.5~10kgf/cm2 (0.05~1MPa)
Weight 100g 120g
Lubrication Not required
Ambient & uid temperature 5 ~60
KCC Co., Ltd.
www.kccpr.com1423 -
PNEUMATIC & HYDRAULIC KQE2000 seriesQuick Exhaust Valve
KQE2000-02
KQE 2000-02
Part no. Parts Material
1 Body ZN
2 Guide AL
3 P-Packing Synthetic Rubber
4 O-Ring Synthetic Rubber
5 Snap-Ring SK5
Part no. Parts Material
1 Body ZN
2 P-Packing Synthetic Rubber
3 O-Ring Synthetic Rubber
4 Seat Plastic Resin
5 Silencer BC
6 Snap-Ring SK5
Structure
Dimensions
KQE 2000-02E
KQE2000-02E
KCC Co., Ltd.
www.kccpr.com 1433 -
PNEUMATIC & HYDRAULIC
Pneumatic Solenoid
Valve
SFVM
KQE2000
SQE
KVHS
SQE series
SQE series
SQE 3 000 - 03
Speci cations
How to Order
SQE 3000-03
Quick Exhaust Valve
Port typeNil Rc(PT) (Standard)G G
Nominal body size Port size2 1/4 02 Rc(PT) 1/43 3/8 03 Rc(PT) 3/84 1/2 04 Rc(PT) 1/2
Fluid Air
Proof pressure 15kgf/cm2 (1.5MPa)
Max. operating pressure 9.9kgf/cm2 (0.99MPa)
Ambient temperature 5 ~60
Weight (Standard) 235g
Dimensions
Structure
Part no. Parts Material
1 Cover AL D/C
2 Diaphragm NBR
3 Plate Steel
4 Body AL D/C
Symbol Application
KCC Co., Ltd.
www.kccpr.com1443 -
PNEUMATIC & HYDRAULIC
KVHS series
KVHS 30 - 03 -
Speci cations
How to Order
Port sizeBody nominal size
20 30 40 5001 1/802 1/403 3/804 1/206 3/410 1
Port typeNil Rc(PT) (Standard)G G
Locking holeNil 1 (Exhaust)2 2 (Exhaust / Supply)
Body nominal size20 1/8, Body size 1/430 1/4, Body size 3/840 3/8, Body size 1/2 50 3/4, Body size 1
Symbol
KVHS20-02 KVHS30-03 KVHS40-04 KVHS50-10
Type KVHS20 KVHS30 KVHS40 KVHS50
Fluid Compressed air
Port sizeIN, OUT Rc(PT)1/8
G1/8Rc(PT)1/4
G1/4Rc(PT)1/4
G1/4Rc(PT)3/8
G3/8Rc(PT)3/8
G3/8Rc(PT)1/2
G1/2Rc(PT)3/4
G3/4Rc(PT)1
G1EXH Rc(PT)1/8, G1/8 Rc(PT)1/4, G1/4 Rc(PT)3/8, G3/8 Rc(PT)1/2, G1/2
Effective sectional areaSmm2(Cv)
IN OUT 10 (0.54) 14 (0.76) 16 (0.87) 31 (1.68) 50.5 (2.7) 80.5 (4.36) 133 (7.2) 185 (10)
OUT EXH 11 (0.6) 16 (0.87) 14 (0.76) 29 (1.57) 32 (1.73) 41 (2.2) 49 (2.7) 60 (3.3)
Operating pressure 0~9.0kgf/cm2 (0~0.9MPa)
Proof pressure 15kgf/cm2
Ambient & uid temperature 0~60
Handle switching angle 90°
Weight 190g 250g 350g 770g
Features
Combination with a modular style FRL (KCC or SMC) is possible.
Easy operating manual switching valve
When in the exhaust operation, the valve may be padlock secured preventing accidental start-ups.
KVHS seriesResidual Pressure Exhaust Valve
KCC Co., Ltd.
www.kccpr.com 1453 -
PNEUMATIC & HYDRAULIC
Pneumatic Solenoid
Valve
SFVM
KQE2000
SQE
KVHS
KVHS seriesResidual Pressure Exhaust Valve
KVHS
Part no. PartsMaterial
20 30 40 501 Body Zn D/C AL D/C
2 Handle Zn D/C
3 Piston Brass
4 Spool Brass + NBR
5 Cover AL
6 Spring Holder Metal
7 Spring Hard Steel Wire
8 Spool Spring SUS
9 Piston O-Ring NBR
10 Cover O-Ring NBR
Model
KCC SMC
L Bracket T Bracket FRL(Modular) Spacer
Bracket attached spacer
FRL(Modular)
KVHS20 - - - Y200 T200T AC20
KVHS30 B310L B310T KAU3000M Y300 Y300T AC25, 30
KVHS40 B410L B410T KAU4000M Y400 Y400T AC40
KVHS50 B610L B610T KAU6000M Y600 Y600T AC50
Bracket is sold separately. Bracket is required if a residual pressure exhaust valve is combined with a modular style FRL.
Structure
How to Use
Residual pressure exhaust valve is basically installed at the exhaust port as shown in the figure above.
The supply or exhaust status of the air flow can be verified at a glance in the indicating window.
SUP : SupplyEXH : Exhaust
When in the exhaust position, the valve may be padlock secured to prevents accidental start-ups.
1. Port 1 is inlet port, port 2 is outlet port, and port 3 is exhaust port. (Only port 1 is pressurizable. Check the connection before operation as misconnection of port may cause malfunction.2. The valve must be switched to each position instantly and securely. Stopping the knob between the extreme positions may cause malfuntion.3. Do not remove the mounting screws from the knob.
Precautions
KCC Co., Ltd.
www.kccpr.com1463 -
PNEUMATIC & HYDRAULIC
KVHS 20 - 01 (02)
KVHS 40 - 03 (04)
Dimensions
KVHS 30 - 02 (03)
KVHS 50 - 06 (10)
KVHS seriesResidual Pressure Exhaust Valve