ASSEMBLY INSTRUCTIONSSHOWER CADDY

108 H X 10.5 W X 8.5 D IN

(274.32 H X 26.67 W X 21.59 D CM )

D www.xxxxxxxxx.com0111 111 111

MODELL: DMV-MM-02, 07/07, E25654

(14 Cent/min aus dem deutschen Festnetz. Mobilfunk max. 42 Cent/min)

JAHRE GA RANTIEJAHRE GA RANTIE

D

KUNDENDIENST

www.xxxxxxxxx.com0111 111 111

MODELL: DMV-MM

USA

AFTER SALES SUPPORT

877 282 6195

MODEL:YEAR WAR RANTY

IRE

AFTER SALES SUPPORT

www.xxxxxxxxx.com0555 555 555GB 0444 444 444

MODEL: DMV-MM-02, 07/07, E25654

3

3

3

4387B A T H R O O M 2YEAR WARRANTY

A Narrow Top TubeTube with Twist Lock

Tapered TubesStraight Tube

Soap Dish BasketBaskets

Top Tube CapUpper CollarLower Collar

BushingsBottom Tube Cap

PART DESCRIPTION QUANTITY

BCDEFGHIJK

11211311141

USA 877 282 6195

Parts List

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

2

F

A

BD

C

C

EG

K

I

H

J

J

J

J

Before You Begin!

1. Unpack the carton and lay out all the parts described on the parts list with diagrams.(Page 2)2. Unfold the carton and lay it on the ground as a working surface to prevent product damage during assembly.3. Check for damaged or missing parts. Call 1-877-282-6195 or email: info@orbithome.comfor further assistance.

USA 877 282 6195AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 5:00pm ESTUSA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

3

Begin by placing a Bushing (J) with beveled edge up, approximately half way down fromthe top of the narrow end of a Tapered Tube (C). Slide a large basket (F) on to the Bushing(J). Repeat with a second Bushing (J) and Basket (F) as shown in Figure 1.

Figure 1

USA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

STEP 1

4

F

J

C

J

Place another Bushing (J) on Straight Tube (D) two thirds of the way down from the top. Slide on the third Basket (F). Now place the last Bushing (J) onto Straight Tube (D). Followthat by sliding onto the Bushing the small Soap Dish (E) as shown in Figure 2.

Figure 2

USA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

STEP 2

5

J

F

ED

Insert the narrow end of the assembly from Step 1 into the bottom of the assembly fromStep 2 as shown in Figure 3.

D

C

Figure 3

USA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

STEP 3

6

Insert the narrow end of the remaining Tapered Tube (C) into the bottom of the previousassembly and place Bottom Tube Cap (K) on the bottom of this assembly as shown inFigure 4.

C

Figure 4

USA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

STEP 4

7

K

Insert the Tube with Twist Lock (B) into the top of the previous assembly. Slide the LowerCollar(I) over the top of (B) and down until it snaps into place on the top of Straight Tube(D) as shown in Figure 5. Please note the spring should be sitting in Tube B.

Figure 5

USA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

STEP 5

8

B

I

D

Plastic side faces down

Spring

Snap the Upper Collar (H) onto the top of the Tube with Twist Lock (B). Insert the Narrow TopTube (A) through the Upper Collar (H) and into the Tube with Twist Lock (B). Place the TopTube Cap (G) onto the top of completed assembly as shown in Figure 6.

A

B

G

H

Figure 6

USA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

STEP 6

9

Position assembled pole in desired location. Adjust the height by loosening tension using acounter-clockwise twist-and-lift motion on Tube with Twist Lock (B) as shown in Figure 7. Lift(B) to create tension then twist clockwise to lock in place.

B

Figure 7

USA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

STEP 7

10

For shorter bathtub ledge to ceiling height adjustment, remove the lower Tapered Tube (C)and replace Bottom Tube Cap (K) as shown in Figure 8.

Figure 8

USA 877 282 6195

Assembly

AFTER SALES SUPPORT MODEL: 4387MONDAY - FRIDAY 10:00am - 6:00pm EST

STEP 8

11

The manufacturer warrants this product will be free from defects inmaterials and workmanship when used for normal personal or householduse, except as provided below. The manufacturer, at its option, may offer acomparable product or offer a replacement part or request that the itembe returned to the place of purchase. This warranty DOES NOT apply todamage caused by negligence, misuse, excessive use, improper cleaning,improper assembly, or any circumstances not directly attributable tomanufacturing defects. Proof of purchase is required in the form of a receipt(copy or original) to validate warranty. This limited 2 year warranty is offeredin lieu of all other warranties, either expressed or implied. In no event shallthe manufacturer, its affiliates, or subsidiaries be responsible for consequentialor incidental damages arising out of a claim of defective product. Somestates or provinces do not allow some exclusions or limitations, so theabove statement may not apply to you. This warranty gives you specificlegal rights. Additional rights vary by state or province.

WARNING: Keep bags and plastic sheeting away from babies and children.Do not use in cribs, beds, carriages, or playpens. The plastic may cling to thenose and mouth and prevent breathing.

2 YEAR LIMITED WARRANTY

WarningWe want you to be completely satisfied with your purchase, so this EASYHOME product is backed by a comprehensive manufacturer’s 2 year war-ranty.

If you require technical support or in the unlikely event that your purchaseis faulty please telephone our Helpline for immediate assistance. Faultyproduct claims made within the 2 year warranty period will be repairedor replaced free of charge.