04 - pipeline flow and thermal analysis
DESCRIPTION
Pipeline CourseTRANSCRIPT
![Page 1: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/1.jpg)
Shawn Kenny, Ph.D., P.Eng.Assistant ProfessorFaculty of Engineering and Applied ScienceMemorial University of [email protected]
ENGI 8673 Subsea Pipeline Engineering
Lecture 04: Pipeline Flow and Thermal Analysis
![Page 2: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/2.jpg)
2 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Lecture 04 Objective
To provide an overview heat transfer mechanisms and simple engineering tool to assess thermal performance in context of pipeline hydraulics
![Page 3: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/3.jpg)
3 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Heat Transfer MechanismsConduction
Direct contact•
Relatively inefficient
ConvectionFlow or circulation•
Natural or forced (advection)
RadiationElectromagnetic energyEmissivity•
Ability to absorb and radiate energy
![Page 4: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/4.jpg)
4 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Thermal EffectsFlow Assurance
Viscosity effects on pressure dropProcess facilitiesWax, asphaltene, hydrate formation
Material behaviourReduced strengthCorrosion ratesCreep
Mechanical designThermal expansionUpheaval, lateral buckling
Shut-in & start-up operationsFlow assuranceAxial walking, ratcheting
![Page 5: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/5.jpg)
5 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Liquid Hydrocarbon Viscosity
![Page 6: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/6.jpg)
6 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Heat Transfer – Conduction
Fourier LawQ ≡ heat loss per unit length (W/m)t ≡ time (s)k ≡ material thermal conductivity (W/m/K)S ≡ surface area (m2)T ≡ temperature (K)U ≡ heat transfer coefficient (W/m2-K)
S
Q k TdSt
∂= − ∇
∂ ∫Q TkAt x
Δ Δ= −
Δ Δ
![Page 7: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/7.jpg)
7 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Heat Transfer – Conduction (cont.)
Steady State ConditionsIntegrate per unit length•
Annular layer
•
Temperature gradient QT
r dr, ΔT
Q TkAt x
∂ ∂= −
∂ ∂Q UA T⇒ = Δ
2
1
2
ln
k TQrr
π Δ=
⎛ ⎞⎜ ⎟⎝ ⎠
2
1
1 2ln
kU A rr r
r
π⇒ = =⎛ ⎞⎜ ⎟⎝ ⎠
![Page 8: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/8.jpg)
8 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Heat Transfer – Conduction (cont.)
Multiple Layer SystemHeat transfer coefficient
Q UA T= Δ
1 2 3
1 11 1 1TU
RU U U
= =+ +∑
1 2 2
1 2 2
TA TQ r r r
k k k
Δ=Δ Δ Δ
+ + +…
![Page 9: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/9.jpg)
9 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Heat Transfer – Conduction (cont.)
Buried Pipelineri ≡ inside pipe radiusro ≡ outside pipe
radius in contact with the soil
21
1 1
cosh ln 1
soil soilburied
i i
oo o
k kUr rH H H
r r r
−
⎡ ⎤⎢ ⎥⎢ ⎥= =⎢ ⎥⎛ ⎞ ⎛ ⎞⎛ ⎞⎢ ⎥⎜ ⎟ ⎜ ⎟+ −⎜ ⎟⎢ ⎥⎝ ⎠⎣ ⎦ ⎜ ⎟⎝ ⎠⎝ ⎠
![Page 10: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/10.jpg)
10 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Thermal Conductivity Parameters
Common Materials (W/m/K)Steel 45Concrete 1.2Soil 1.0–2.0Neoprene 0.26PP syntactic 0.15–0.20PU syntactic 0.10–0.15PU light foam 0.02–0.03
![Page 11: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/11.jpg)
11 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Heat Transfer Coefficient, U (W/m2-K)
Non-insulated Single Wall25 W/m2KBurial decrease U by ~1/3
Pipeline Bundle≈ 1.5–2.5
Insulated Pipe-in-Pipe≈ 3.0.–6.0
Insulated Pipe-in-Pipe≈ 0.5–1.0 Ref: McKechnie and Hayes (2003)
Ref: Geertsenand Ofredi (2000)
![Page 12: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/12.jpg)
12 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Steady State Thermal Profile
Parametersm – mass flow rate (kg/s)U – heat transfer coefficient (W/m2-K)Cp – specific heat capacity (J/kg-K)•
Oil ≡
1800 and Gas ≡
2500
T0 – ambient temperature (°C)T1 – pipeline temperature at section 1 (°C)T2 – pipeline temperature at section 2 (°C)
( )-
= - +2 1 0 0p
U D dxmCT T T e Tπ
[ ]ρ=m Q
![Page 13: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/13.jpg)
13 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Design Considerations
Ref: Maksoud (2004)
![Page 14: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/14.jpg)
14 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Design Considerations (cont.)
Ref: Maksoud (2004)
![Page 15: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/15.jpg)
15 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Example 4-01
Calculate the heat loss coefficient (U) for an in-air, single wall, steel linepipe with no external or internal coatings.
Do = 508mmt = 12.7mmk = 45 W/m/K
22
1
451 1 3636
0.2413 0.254lnln0.2413
Wk WmKU
r m m Kmrmr
⎛ ⎞⎜ ⎟⎜ ⎟= = =⎜ ⎟⎛ ⎞ ⎛ ⎞⎜ ⎟⎜ ⎟ ⎜ ⎟
⎝ ⎠⎝ ⎠⎝ ⎠
![Page 16: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/16.jpg)
16 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Example 4-02
Compare heat transfer coefficientsNon-insulated pipeline versus pipeline with a 50mm concrete coating
![Page 17: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/17.jpg)
17 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Example 4-03Calculate the heat loss coefficient (U) for the following pipe-in-pipe system
Inner Pipe•
Do = 406.4mm
•
t = 17.5mm•
k = 45 W/m/K
Polypropylene Foam•
t = 45mm
•
k = 0.22 W/m/KCasing•
t =12.7mm
•
k = 45 W/m/K
![Page 18: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/18.jpg)
18 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Example 4-03 (cont.)Example 4-03
Determine U-value for multiple layer system
DEFINED UNITS
BBL 42gal:=
INPUT PARAMETERS
Pipeline System
Nominal Outside Diameter - Inner Pipe Do 406.4mm:=
Nominal Wall Thickness - Inner Pipe t1 17.5mm:=
Conductivity - Inner Pipe k1 45 W⋅ m 1−⋅ K 1−
⋅:=
Nominal Wall Thickness - PP Foam t2 45mm:=
Conductivity - PP Foam k2 0.22W m 1−⋅ K 1−
⋅:=
Nominal Wall Thickness - Outer Pipe t3 12.7mm:=
Conductivity - Outer Pipe k3 45W m 1−⋅ K 1−
⋅:=
![Page 19: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/19.jpg)
19 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Example 4-03 (cont.)
![Page 20: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/20.jpg)
20 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
Reading List1.
Bell, J. and Geertsen, C. (2002). The McPIPETM
Extended Cooldown
System. Presentation, Deepwater Offshore Techology, 14-16 November, 20p.
[2002_Bell_McPipe_Extended_Cooldown_System.pdf]
2.
Geertsen, C. and Offredi, M. (2000). Highly Thermally Insulated and Traced Pipelines for Deepwater. 12th
Deep Offshore Technology Conference, New Orleans, USA, 13p.
[2000_Geertsen_Insulated_Traced_Deepwater_PL.pdf]
3.
Loch, K.J. (2000). Deepwater Soil Thermally Insulates Buried Flowlines. Deepwater Technology, www.pipeline.com, August 2000.
[2000_Loch_Deepwater_Soil_Insulation.pdf]
4.
Maksoud, J. (2004). Petro-Canada Investigates Flow Assurance Challenges. Offshore, pp.112-113.
[2004_Maksoud_ FA_Challenges_Petro_Canada.pdf]
![Page 21: 04 - Pipeline Flow and Thermal Analysis](https://reader033.vdocument.in/reader033/viewer/2022061119/546b245ab4af9f330a8b4d72/html5/thumbnails/21.jpg)
21 ENGI 8673 Subsea Pipeline Engineering – Lecture 04© 2008 S. Kenny, Ph.D., P.Eng.
ReferencesGeertsen, C. and Offredi, M. (2000). Highly Thermally Insulated and Traced Pipelines for Deepwater. 12th Deep Offshore Technology Conference, New Orleans, USA, 13p.Loch, K.J. (2000). Deepwater Soil Thermally Insulates Buried Flowlines. Deepwater Technology, www.pipeline.com, August 2000.Maksoud, J. (2004). Petro-Canada Investigates Flow Assurance Challenges. Offshore, pp.112-113.McKechnie, J.G. and D.T. Hayes (2003). Pipeline Insulation Performance for Long Distance Subsea Tie-backs. 14p.