07/2014 version 4 % discount off price …5) cran… · 07/2014 version 4 % discount off price...
TRANSCRIPT
07/2014 VERSION 4 % DISCOUNT OFFPRICE PAGES/CRANES
Vendor Name: North Central Truck EquipmentContact Person: Dan St. SauverStreet Address: 2629 Clearwater Rd
P.O. Box: 1084City, State, Zip St. Cloud, MN 56301
Phone #: 320-251-7252Toll Free #: 877-485-9595
Fax #: 320-252-3561Email Address: [email protected]
Website: www.northcentralinc.com
PRICING METHOD 2 - PERCENTAGE DISCOUNT OFF LIST
1.0 CRANE/MAKE/MANUFACTURER Venturo
Manufacture Standard Warranty (include months, years, hours) 1 year
Percentage Discount to be applied to Price List 4 % Discount
Date & Price List I.D. Number Nov. 1, 2011; VEN1111
2.0 OPTIONS (If not included in list) NA3.0 EXTENDED WARRANTY OPTIONS NA
4.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONSDELIVERY STARTING POINT - City, State, Zip St. Cloud, MN 56301
Price per loaded mile $2.25
5.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 5% DiscountAND ACCESSORIES - (See Special Terms and Conditions)
Price List Date and Number SAME
6.0 INSTALLATION SERVICES MAY BE REQUESTED ON AN AS NEEDED BASIS. See Special Terms and Conditions
Per Hour $85.00
MOMENT OVERLOAD SHUTOFF SYSTEM 25 FT PLUG IN COMPARTMENT REMOTE CONTROL PENDANTANTI-TWO BLOCKING SWIVEL SNATCH BLOCK WITH SAFETY HOOKWIRE ROPE WITH SAFETY HOOK (SEE ABOVE)
POWER MANUAL
HT66KX-P PROPORTIONAL 12' - 25' 13' 0' 2600# 2750# $21,720.00
$1,024.00
$2,020.00
$244.00
MODEL PART# GPM
HT66KX-P 19296-10.0 12 @ 1200 RPM
WEIGHT
130
EFFECTIVE DATE: NOV. 01,2011
DESCRIPTION
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
BOOM EXTENSIONINSTALL WEIGHTMODEL CONTROLS
OPTIONS
SELLING PRICESHIPPING WEIGHT
Includes pendant switches, wiring harness and relays to supply a 12 volt or ground signal to the engine compartment. Does not include an auxillary electric or vacuum speed controller.
PUMPS (hoses/fittings not included)
B FLANGE, 7/8" - 13 SPLINE
PROPORTIONAL CONTROLS - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display. Includes battery recharger.
In Lieu of Standard Corded Remote
In addition to Standard Corded Remote
WIRE ROPEFT / LB RATING
100 FT. OF 7/16"66,000
ENGINE START/STOP & THROTTLE CONTROL
BOOM LENGTH
PRICES
REV: OCT. 15,2011
SPECIFICATIONS
STANDARD EQUIPMENT
POWER ROTATION - 400 DEGREES
MODEL
HT66KX
MAX CAPACITY (LB)
11,000
NOTE: RESERVOIRS INCLUDE 100 MESH SUCTION SCREEN, 10 MICRON RETURN FILTER, RETURN AND SUPPLY PRESSURE GAUGES, SIGHT GLASS AND BREATHER CAP.
PUMP TYPE SELLING PRICE
$432.00
$980.0040 GAL. BULKHEAD MOUNT 22998
PART #RESERVOIRS (hoses/fittings not included)
SELLING PRICE
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT66KX
SUGGESTED SELLING PRICE LIST
PART # INSTALL WEIGHTSHIPPING WEIGHT SELLING PRICE
27634-PHX-LL 1190 lbs 1255 lbs $6,288.00
27634-PHX-SL 1170 lbs 1310 lbs $6,288.00
27695-PHX-LL 790 lbs 855 lbs $5,444.00
27695-PHX-SL 770 lbs 835 lbs $5,444.00
SEE BELOW
DESCRIPTION PART # INSTALL WEIGHTSHIPPING WEIGHT SELLING PRICE
24962-PH 410# 475# $3,680.00
24962-CD 315# 380# $1,564.00
DESCRIPTION PART # WEIGHT SELLING PRICE
27656-36 376# $1,308.00
PART # WEIGHT SELLING PRICE
20381-1 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
BOOM REST
DESCRIPTION
FOR NON-VENTURO CRANE BODIES: Hydraulic out, hydraulic down. Full width single mounting tube with 60" crane side extension, 0" opposite side extension, 154" total spread, 94" retracted. Vertical travel: 30" hydraulic stroke. Bolt-on, adjustable legs. Includes 4 way control valve and concealed hydraulic hoses.
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT Crane Bodies. Installation of outrigger cross tube is included at no additional charge. 24962 Front outriggers may be required for additional stability.
Mounting Pedestal - 36" High (HT40/50KX) - For platform body
OUTRIGGER PACKAGES
DESCRIPTIONFOR VENTURO HT66 CRANE BODY: Hydraulic out, hydraulic down. Full width double mounting tubes permit 100% stability in all rotation zones. 72" crane side extension, 48" opposite side extension, 214" total spread, 94" retracted. Vertical travel: 30" hydraulic stroke. Bolt-on, adjustable legs. Includes 4 way control valve and concealed hydraulic hoses.
MOUNTING PEDESTALS
REV: OCT. 15,2011
Manual pullouts, hydraulic down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 143", retracted 95", vertical travel of 30", includes 2 way control valve and hoses.
Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 142", retracted 94", vertical travel of 13 1/2" pin adjustment plus 12" crank adjustment.
Same as 27634-PHX-LL above with Vertical travel of 20"
FRONT OUTRIGGER PACKAGES(Required for full stability in all rotation zones.)
Same as 27685-PHX-LL above with Vertical travel of 20"
BOOM REST - Adjustable 18" - 26" - For utility body
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT66KX
SUGGESTED SELLING PRICE LIST
MOMENT OVERLOAD SHUTOFF SYSTEM 25 FT PLUG IN COMPARTMENT REMOTE CONTROL PENDANT
ANTI-TWO BLOCKING SWIVEL SNATCH BLOCK WITH SAFETY HOOK
WIRE ROPE WITH SAFETY HOOK (SEE ABOVE)
POWER MANUAL
HT50KX NON-PROP 10' - 20' 6' 4' 1925# 2125# $18,920.00
HT50KX-P PROPORTIONAL 10' - 20' 10' 0' 1925# 2125# $20,940.00
HT50KX-25 PROPORTIONAL 12' - 24' 10" 13' 0' 2125# 2325# $21,432.00
$1,024.00
$2,020.00
$928.00
$1,324.00
$244.00
MODEL PART# GPMHT50KX 19296-2.64 3.0 @ 1150 RPM
HT50KX-P 19296-10.0 12 @ 1200 RPM
WEIGHT4987
EFFECTIVE DATE: NOV. 01,2011
SELLING PRICEPART #
NOTE: RESERVOIRS INCLUDE 100 MESH SUCTION SCREEN, 10 MICRON RETURN FILTER, RETURN AND SUPPLY PRESSURE GAUGES, SIGHT GLASS AND BREATHER CAP.
25 GAL. BULKHEAD MOUNT$508.00
DESCRIPTION19294
(OVER FOR OUTRIGGERS, MOUNTING PEDESTALS AND BOOM RESTS)
10 GALLON SIDE MOUNT
PUMPS (hoses/fittings not included)
$948.0022785
RESERVOIRS (hoses/fittings not included)
A FLANGE, 5/8" - 9 SPLINEB FLANGE, 7/8" - 13 SPLINE
$252.00$432.00
SELLING PRICEPUMP TYPE
ENGINE START/STOP & THROTTLE CONTROL
In Lieu of Standard Corded Remote
In Lieu of Standard Corded Remote
In Addition to Standard Corded Remote
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
Includes pendant switches, wiring harness and relays to supply a 12 volt or ground signal to the engine compartment. Does not include an auxillary electric or vacuum speed controller. (Available only with Proportional Controls)
SPECIFICATIONS
STANDARD EQUIPMENT
POWER ROTATION - 400 DEGREES
MODEL MAX CAPACITY (LB) FT / LB RATING WIRE ROPE100 FT. OF 3/8"50,000
SHIPPING WEIGHT
BOOM EXTENSION
In Addition to Standard Corded Remote
PROPORTIONAL CONTROLS - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display. Includes battery recharger.
BOOM LENGTH INSTALL WEIGHTCONTROLSMODEL
REV: FEB. 12,2013
8,000
PRICES
OPTIONS
SELLING PRICE
HT50KX
NON-PROPORTIONAL - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT50KX
SUGGESTED SELLING PRICE LIST
PART # INSTALL WEIGHT WEIGHT SELLING PRICE25100-CD 450# 515# $1,932.00
25100-PH-SL 490# 555# $3,772.00
25100-PH-LL 510 575 $3,772.00
25100-PHX-SL 590# 655# $4,716.00
25100-PHX-LL 610 675 $4,716.00
SEE BELOW
PART # WEIGHT SELLING PRICE24971-LCT 45# $384.00
24971-FP 180# $928.00
23960-2 43# $340.00
23962-2 53# $408.00
PART # WEIGHT SELLING PRICE
17830-36 376# $892.00
PART # WEIGHT SELLING PRICE20381-1 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
DESCRIPTION
Mounting Pedestal - 36" High (HT40/50KX) - For platform body
Fold Away Type - For Platform Body. Vertically extends from 28-1/2" to 44" plus 5" screw foot adjustment.
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT Crane Bodies. Installation of outrigger cross tube is included at no additional charge. 24971-LCT Front outriggers may be required for additional stability.
OTHER MANUAL OUTRIGGERS
DUAL TUBE MODELS AVAIALBE FOR CENTER MOUNT CRANE APPLICATIONS (Contact the Sales Department)
Manual pullout, manual crank down. Full width mounting tube 6" x 8" x 81", single crane side 48" pullout with polyurethane rollers, total spread of 142", retracted 94", vertical travel: 14" pin adjustment plus 12" crank adjustment. Bolt-on, adjustable legs.
OUTRIGGER PACKAGES
Manual pullout, hydraulic down. Full width mounting tube 6" x 8" x 81", single crane side 48" pullout with polyurethane rollers, total spread of 142", retracted 94", vertical travel: 20" hydraulic stroke. Bolt-on, adjustable legs. Includes 2 way control valve, selector valve and concealed hydraulic hoses.
Same as above with 30" hydraulic stroke at no additional charge
Same as above with 30" hydraulic stroke at no additional charge
(For use as auxillary outriggers in addition to one of the packages listed above.)
Hydraulic out, hydraulic down. Full width mounting tube 6" x 8" x 81", single crane side 48" hydraulic extension, total spread of 142", retracted 94", vertical travel: 20" hydraulic stroke. Bolt-on, adjustable legs. Includes 4 way control valve, selector valve and concealed hydraulic hoses.
Single Front Outrigger - For CS or SS installation in pre-installed mounting tube on Venturo HT crane body. 12" pullout. Vertical travel of 30" pin adjustment plus 5" screw foot adjustment.Front Outrigger Package - For installation on non-Venturo crane body. Manual pullouts, manual down. Full width mounting tube 3" x 4" x 80", two pullouts (12" CS-12"SS) total spread of 116", retracted 92", vertical travel of 30" pin adjustment plus 5" screw foot adjustment.
MOUNTING PEDESTALS
DESCRIPTION
DESCRIPTION
Pullout Type - 8" extension with 32" mounting tube. Vertically extends from 4 1/2" to 30" plus 5" screw foot adjustment.
DESCRIPTION
REV: FEB. 12,2013
BOOM REST - Adjustable 18" - 26" - For utility body
BOOM REST
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT50KX
SUGGESTED SELLING PRICE LIST
MOMENT OVERLOAD SHUTOFF SYSTEM 25 FT PLUG IN COMPARTMENT REMOTE CONTROL PENDANT
ANTI-TWO BLOCKING SWIVEL SNATCH BLOCK WITH SAFETY HOOK
WIRE ROPE WITH SAFETY HOOK (SEE ABOVE)
POWER MANUAL
HT40KX NON-PROP 10' - 20' 6' 4' 1900# 2100# $16,912.00
HT40KX-P PROPORTIONAL 10' - 20' 10' 0' 1900# 2100# $19,000.00
$1,024.00
$2,020.00
$928.00
$1,324.00
$244.00
MODEL PART# GPM
HT40KX 19296-2.64 2.6 @ 1000 RPM
HT40KX-P 19296-10.0 12 @ 1200 RPM
WEIGHT4987
EFFECTIVE DATE: NOV. 01,2011
OPTIONS
SELLING PRICE
PROPORTIONAL CONTROLS - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display. Includes battery recharger.
In Lieu of Standard Corded Remote
In Addition to Standard Corded Remote
ENGINE START/STOP & THROTTLE CONTROL
$508.00
In Addition to Standard Corded Remote
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
NON-PROPORTIONAL - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
PUMPS (hoses/fittings not included)PUMP TYPE
Includes pendant switches, wiring harness and relays to supply a 12 volt or ground signal to the engine compartment. Does not include an auxillary electric or vacuum speed controller. (Available only with Proportional Controls)
BOOM LENGTH
HT40KX 40,000
PRICESBOOM EXTENSION
INSTALL WEIGHTMODEL CONTROLSSHIPPING WEIGHT
6,000
10 GALLON SIDE MOUNT
In Lieu of Standard Corded Remote
25 GAL. BULKHEAD MOUNT
A FLANGE, 5/8" - 9 SPLINE
SELLING PRICE
SPECIFICATIONS
STANDARD EQUIPMENT
POWER ROTATION - 400 DEGREES
MODEL WIRE ROPEMAX CAPACITY (LB) FT / LB RATING
100 FT. OF 3/8"
(OVER FOR OUTRIGGERS, MOUNTING PEDESTALS AND BOOM RESTS)
RESERVOIRS (hoses/fittings not included)
REV: FEB. 12,2013
22785
SELLING PRICE
B FLANGE, 7/8" - 13 SPLINE
DESCRIPTION
NOTE: RESERVOIRS INCLUDE 100 MESH SUCTION SCREEN, 10 MICRON RETURN FILTER, RETURN AND SUPPLY PRESSURE GAUGES, SIGHT GLASS AND BREATHER CAP.
PART #19294
$252.00
$432.00
$948.00
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT40KX
SUGGESTED SELLING PRICE LIST
PART # INSTALL WEIGHT WEIGHT SELLING PRICE25100-CD 450# 515# $1,932.00
25100-PH 490# 555# $3,772.00
25100-PH-LL 510 575 $3,772.00
25100-PHX 590# 655# $4,716.00
25100-PHX-LL 610 675 $4,716.00
PART # WEIGHT SELLING PRICE24971-LCT 45# $384.00
24971-FP 180# $928.00
23960-2 43# $340.00
23962-2 53# $408.00
PART # WEIGHT SELLING PRICE
17830-36 376# $892.00
PART # WEIGHT SELLING PRICE20381-1 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT Crane Bodies. Installation of outrigger cross tube is included at no additional charge. 24971-LCT Front outriggers may be required for additional stability.
Manual pullout, hydraulic down. Full width mounting tube 6" x 8" x 81", single crane side 48" pullout with polyurethane rollers, total spread of 142", retracted 94", vertical travel: 20" hydraulic stroke. Bolt-on, adjustable legs. Includes 2 way control valve, selector valve and concealed hydraulic hoses.
DESCRIPTION
DUAL TUBE MODELS AVAIALBE FOR CENTER MOUNT CRANE APPLICATIONS (Contact the Sales Department)
Pullout Type - 8" extension with 32" mounting tube. Vertically extends from 4 1/2" to 30" plus 5" screw foot adjustment.
(For use as auxillary outriggers in addition to one of the packages listed above.)
DESCRIPTION
OTHER MANUAL OUTRIGGERS
Fold Away Type - For Platform Body. Vertically extends from 28-1/2" to 44" plus 5" screw foot adjustment.
Single Front Outrigger - For CS or SS installation in pre-installed mounting tube on Venturo HT crane body. 12" pullout. Vertical travel of 30" pin adjustment plus 5" screw foot adjustment.Front Outrigger Package - For installation on non-Venturo crane body. Manual pullouts, manual down. Full width mounting tube 3" x 4" x 80", two pullouts (12" CS-12"SS) total spread of 116", retracted 92", vertical travel of 30" pin adjustment plus 5" screw foot adjustment.
REV: FEB. 12,2013
Mounting Pedestal - 36" High (HT40/50KX) - For platform body
DESCRIPTION
MOUNTING PEDESTALS
BOOM REST - Adjustable 18" - 26" - For utility body
BOOM REST
DESCRIPTION
SEE BELOW
OUTRIGGER PACKAGES
Hydraulic out, hydraulic down. Full width mounting tube 6" x 8" x 81", single crane side 48" hydraulic extension, total spread of 142", retracted 94", vertical travel: 20" hydraulic stroke. Bolt-on, adjustable legs. Includes 4 way control valve, selector valve and concealed hydraulic hoses.
Same as above with 30" hydraulic stroke at no additional charge
Same as above with 30" hydraulic stroke at no additional charge
Manual pullout, manual crank down. Full width mounting tube 6" x 8" x 81", single crane side 48" pullout with polyurethane rollers, total spread of 142", retracted 94", vertical travel: 14" pin adjustment plus 12" crank adjustment. Bolt-on, adjustable legs.
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT40KX
SUGGESTED SELLING PRICE LIST
MOMENT OVERLOAD SHUTOFF SYSTEM 25 FT PLUG IN COMPARTMENT REMOTE CONTROL PENDANT
ANTI-TWO BLOCKING SWIVEL SNATCH BLOCK WITH SAFETY HOOK
WIRE ROPE WITH SAFETY HOOK (SEE ABOVE)
POWER MANUAL
HT30KX NON-PROP 10' - 20' 6' 4' 1535# 1635# $16,352.00
HT30KX-P PROPORTIONAL 10' - 20' 10' 0' 1535# 1635# $17,484.00
$1,024.00
$2,020.00
$928.00
$1,324.00
$244.00
MODEL PART# GPMHT30KX 19296-2.64 3.0 @ 1150 RPM
HT30KX-P 19296-4.00 4.0 @ 1000 RPM
WEIGHT49
NOTE: RESERVOIRS INCLUDE 100 MESH SUCTION SCREEN, 10 MICRON RETURN FILTER, RETURN AND SUPPLY PRESSURE GAUGES, SIGHT GLASS AND BREATHER CAP.
Includes pendant switches, wiring harness and relays to supply a 12 volt or ground signal to the engine compartment. Does not include an auxillary electric or vacuum speed controller. (Available only with Proportional Controls)
PUMPS (hoses/fittings not included)
$508.00
RESERVOIRS (hoses/fittings not included)
A FLANGE, 5/8" - 9 SPLINE
A FLANGE, 5/8" - 9 SPLINEPUMP TYPE SELLING PRICE
WIRE ROPE80 FT. OF 5/16"
NON-PROPORTIONAL - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
In Lieu of Standard Corded Remote
In Addition to Standard Corded Remote
HT30KX
MAX CAPACITY (LB) FT / LB RATING
10 GALLON SIDE MOUNTSELLING PRICEDESCRIPTION
ENGINE START/STOP & THROTTLE CONTROL
PART #
SPECIFICATIONS
STANDARD EQUIPMENT
POWER ROTATION - 400 DEGREES
MODEL30,0005,000
PROPORTIONAL CONTROLS - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display. Includes battery recharger.
In Lieu of Standard Corded Remote
In Addition to Standard Corded Remote
PRICES
OPTIONS
SELLING PRICE
$252.00
$252.00
(OVER FOR OUTRIGGERS, MOUNTING PEDESTALS AND BOOM RESTS)
19294
SHIPPING WEIGHT
BOOM EXTENSION
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
BOOM LENGTH INSTALL WEIGHTCONTROLSMODEL
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT30KX
SUGGESTED SELLING PRICE LIST
EFFECTIVE DATE: NOV. 01,2011
PART # INSTALL WEIGHT WEIGHT SELLING PRICE24962-CD 315# 380# $1,564.00
24962-PH 410# 475# $3,680.00
SEE BELOW
PART # WEIGHT SELLING PRICE24971-LCT 45# $384.00
24971-FP 180# $928.00
23960-2 43# $340.00
23962-2 53# $408.00
PART # WEIGHT SELLING PRICE
17576-36 197# $712.00
PART # WEIGHT SELLING PRICE
20381-2 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
DESCRIPTION
Single Front Outrigger - For CS or SS installation in pre-installed mounting tube on Venturo HT crane body. 12" pullout. Vertical travel of 30" pin adjustment plus 5" screw foot adjustment.
Front Outrigger Package - For installation on non-Venturo crane body. Manual pullouts, manual down. Full width mounting tube 3" x 4" x 80", two pullouts (12" CS-12"SS) total spread of 116", retracted 92", vertical travel of 30" pin adjustment plus 5" screw foot adjustment.
MOUNTING PEDESTALS
OUTRIGGER PACKAGES
Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 142", retracted 94", vertical travel of 13 1/2" pin adjustment plus 12" crank adjustment.
DESCRIPTION
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT Crane Bodies. Installation of outrigger cross tube is included at no additional charge. 24971-LCT Front outriggers may be required for additional stability.
(For use as auxillary outriggers in addition to one of the packages listed above.)
OTHER MANUAL OUTRIGGERS
Mounting Pedestal - 36" High - For platform body
BOOM REST - Adjustable 18" - 26" - For utility body
Fold Away Type - For Platform Body. Vertically extends from 28-1/2" to 44" plus 5" screw foot adjustment.
Manual pullouts, hydraulic down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 143", retracted 95", vertical travel of 20", includes 2 way control valve, selector valve and concealed hydraulic hoses.
DESCRIPTION
DESCRIPTION
Pullout Type - 8" extension with 32" mounting tube. Vertically extends from 4 1/2" to 30" plus 5" screw foot adjustment.
F.O.B: CINCINNATI, OHIOREV: FEB. 12,2013
REV: FEB. 12,2013
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT30KX
SUGGESTED SELLING PRICE LIST
MOMENT OVERLOAD SHUTOFF SYSTEM 25 FT PLUG IN COMPARTMENT REMOTE CONTROL PENDANT
ANTI-TWO BLOCKING SWIVEL SNATCH BLOCK WITH SAFETY HOOK
WIRE ROPE WITH SAFETY HOOK (SEE ABOVE)
POWER MANUAL
HT25KX NON-PROP 10' - 20' 6' 4' 1535# 1635# $15,776.00
HT25KX-P PROPORTIONAL 10' - 20' 10' 0' 1535# 1635# $16,912.00
$1,024.00
$2,020.00
$928.00$1,324.00
$244.00
MODEL PART# GPM
HT25KX 19296-1.60 2.0 @ 1250 RPMHT25KX-P 19296-4.00 4.0 @ 1000 RPM
WEIGHT49
EFFECTIVE DATE: NOV. 01,2011
PUMPS (hoses/fittings not included)
RESERVOIRS (hoses/fittings not included)
A FLANGE, 5/8" - 9 SPLINE $252.00
ENGINE START/STOP & THROTTLE CONTROL
$508.00PART #19294
PUMP TYPE SELLING PRICE
A FLANGE, 5/8" - 9 SPLINE $252.00
Includes pendant switches, wiring harness and relays to supply a 12 volt or ground signal to the engine compartment. Does not include an auxillary electric or vacuum speed controller. (Available only with Proportional Controls)
25,000 80 FT. OF 5/16"
In Addition to Standard Corded Remote
PRICES
OPTIONS
SELLING PRICESHIPPING WEIGHT
BOOM EXTENSION
PROPORTIONAL CONTROLS - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display. Includes battery recharger.
In Lieu of Standard Corded Remote
NON-PROPORTIONAL - Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
In Lieu of Standard Corded RemoteIn Addition to Standard Corded Remote
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
BOOM LENGTH INSTALL WEIGHTCONTROLSMODEL
NOTE: RESERVOIRS INCLUDE 100 MESH SUCTION SCREEN, 10 MICRON RETURN FILTER, RETURN AND SUPPLY PRESSURE GAUGES, SIGHT GLASS AND BREATHER CAP.
(OVER FOR OUTRIGGERS, MOUNTING PEDESTALS AND BOOM RESTS)
FT / LB RATING WIRE ROPE
HT25KX 5,000
REV: FEB. 12,2013
10 GALLON SIDE MOUNTSELLING PRICEDESCRIPTION
SPECIFICATIONS
STANDARD EQUIPMENT
POWER ROTATION - 400 DEGREES
MODEL MAX CAPACITY (LB)
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT25KX
SUGGESTED SELLING PRICE LIST
PART # INSTALL WEIGHT WEIGHT SELLING PRICE24962-CD 315# 380# $1,564.00
24962-PH 410# 475# $3,680.00
SEE BELOW
PART # WEIGHT SELLING PRICE24971-LCT 45# $384.00
24971-FP 180# $928.00
23960-2 43# $340.00
23962-2 53# $408.00
PART # WEIGHT SELLING PRICE
17576-36 197# $712.00
PART # WEIGHT SELLING PRICE
20381-2 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
OUTRIGGER PACKAGES
Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 142", retracted 94", vertical travel of 13 1/2" pin adjustment plus 12" crank adjustment.
Mounting Pedestal - 36" High - For platform body
(For use as auxillary outriggers in addition to one of the packages listed above.)
DESCRIPTION
Pullout Type - 8" extension with 32" mounting tube. Vertically extends from 4 1/2" to 30" plus 5" screw foot adjustment.
BOOM REST
F.O.B: CINCINNATI, OHIO
DESCRIPTION
Manual pullouts, hydraulic down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 143", retracted 95", vertical travel of 20", includes 2 way control valve, selector valve and concealed hydraulic hoses.
DESCRIPTION
Single Front Outrigger - For CS or SS installation in pre-installed mounting tube on Venturo HT crane body. 12" pullout. Vertical travel of 30" pin adjustment plus 5" screw foot adjustment.
Front Outrigger Package - For installation on non-Venturo crane body. Manual pullouts, manual down. Full width mounting tube 3" x 4" x 80", two pullouts (12" CS-12"SS) total spread of 116", retracted 92", vertical travel of 30" pin adjustment plus 5" screw foot adjustment.
MOUNTING PEDESTALS
REV: FEB. 12,2013
BOOM REST - Adjustable 18" - 26" - For utility body
DESCRIPTION
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT Crane Bodies. Installation of outrigger cross tube is included at no additional charge. 24971-LCT Front outriggers may be required for additional stability.
OTHER MANUAL OUTRIGGERS
Fold Away Type - For Platform Body. Vertically extends from 28-1/2" to 44" plus 5" screw foot adjustment.
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HYDRAULIC CRANES
HT25KX
SUGGESTED SELLING PRICE LIST
6,000 LB. MAXIMUM CAPACITY POWER ROTATION - 360° CONTINUOUS
36,000 FT. LB. RATING
12V DC ELECTRIC / HYDRAULIC OPERATION
CAPACITY OVERLOAD SHUT-OFF SYSTEM SWIVEL SNATCH BLOCK WITH SAFETY HOOK
ANTI-TWO BLOCKING MASTER DISCONNECT SWITCH
80 FT OF 5/16 FT WIRE ROPE WITH SAFETY HOOK
25100 SERIES OUTRIGGERS - OR EQUIVALENT 14,500 LB. GVWR CHASSIS
POWER MANUAL
10' - 20' 10' 0 1535# 1635# $17,764.00
SELLING PRICE$928.00
$1,324.00
PART # WEIGHT SELLING PRICE
17576-36 376# $892.00
20381-2 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
SPECIFICATIONS
POWER BOOM ELEVATION
STANDARD EQUIPMENT
POWER BOOM EXTENSION
MINIMUM REQUIREMENTS
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
SHIPPING WEIGHT
INSTALL WEIGHT
Boom Rest - Adjustable 18" - 26" for utility body
25 FT PLUG IN REMOTE CONTROL PENDANT
25 FT X #2 GA BATTERY CABLE PLUS 4 FT FROM CRANE TO DISCONNECT SWITCH
MODEL
OPTIONS
In Lieu of Standard Corded Remote
SELLING PRICE
Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
(OVER FOR OUTRIGGERS)
DESCRIPTION
In Addition to Standard Corded Remote
REV: FEB. 12,2013
PRICESBOOM EXTENSION
Mounting Pedestal - 36" High for platform body
ET36KX
BOOM LENGTH
(For HT25KX) - Manual pullouts, manual crank down. Full width mounting (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting (For HT25KX) - Manual pullouts, manual crank down. Full width mounting (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting (For HT25KX) - Manual pullouts, manual crank down. Full width mounting (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting
(For HT25KX) - Manual pullouts, manual crank down. Full width mounting (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting
12110 BEST PLACE
ELECTRIC/HYDRAULIC CRANES
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427
ELECTRIC/HYDRAULIC CRANES
ET36KX
SUGGESTED SELLING PRICE LIST
PART #INSTALL WEIGHT WEIGHT SELLING PRICE
25100-CD 450# 515# $1,932.00
25100-PHE 530# 595# $4,504.00
PART # WEIGHT SELLING PRICE24971-LCT 45# $384.00
24971-FP 180# $928.00
23960-2 43# $340.00
23962-2 53# $408.00
EFFECTIVE DATE: NOV. 01,2011 REV: FEB. 12,2013
Manual pullout, manual crank down. Full width mounting tube 6" x 8" x 81", single crane side 48" pullout with polyurethane rollers, total spread of 142", retracted 94", vertical travel: 14" pin adjustment plus 12" crank adjustment. Bolt-on, adjustable legs.
Single Front Outrigger - For CS or SS installation in pre-installed mounting tube on Venturo HT crane body. 12" pullout. Vertical travel of 30" pin adjustment plus 5" screw foot adjustment.
Manual pullouts, hydraulic down with 2 way control valve, and electric/hydraulic pump and hoses. Full width mounting tube 6" x 8" x 81", single crane side 48" pullout with polyurethane rollers, total spread of 142", retracted 94", vertical travel: 20" hydraulic stroke. Bolt-on, adjustable legs. Includes 2 way control valve and concealed hydraulic hoses.
DESCRIPTION
OUTRIGGER PACKAGES
Front Outrigger Package - For installation on non-Venturo crane body. Manual pullouts, manual down. Full width mounting tube 3" x 4" x 80", two pullouts (12" CS-12"SS) total spread of 116", retracted 92", vertical travel of 30" pin adjustment plus 5" screw foot adjustment.
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT Crane Bodies. Installation of outrigger cross tube is included at no additional charge. 24971-LCT Front outriggers may be required for additional stability.
OTHER MANUAL OUTRIGGERS
Pullout Type - 8" extension with 32" mounting tube. Vertically extends from 4 1/2" to 30" plus 5" screw foot adjustment.
SEE BELOW
(For use as auxillary outriggers in addition to one of the packages listed above.)
DESCRIPTION
Fold Away Type - For Platform Body. Vertically extends from 28-1/2" to 44" plus 5" screw foot adjustment.
(For HT25KX) - Manual pullouts, manual crank down. Full width mounting (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ET36KX
SUGGESTED SELLING PRICE LIST
POWER ROTATION - 360° CONTINUOUS
12V DC ELECTRIC / HYDRAULIC OPERATION
CAPACITY OVERLOAD SHUT-OFF SYSTEM SWIVEL SNATCH BLOCK WITH SAFETY HOOK
ANTI-TWO BLOCKING MASTER DISCONNECT SWITCH
24962 SERIES OUTRIGGERS - OR EQUIVALENT ET30KX 11,000 LB. GVWR CHASSIS
POWER MANUAL
10' - 20' 6' 4' 1500# 1600# $16,964.00
SELLING PRICE$928.00
$1,324.00
PART # WEIGHT SELLING PRICE17576-36 197# $712.00
20381-2 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
Mounting Pedestal - 36" High for platform body
OPTIONS
In Lieu of Standard Corded Remote
BOOM EXTENSION
DESCRIPTION
PRICES
STANDARD EQUIPMENT
25 FT X #2 GA BATTERY CABLE PLUS 4 FT FROM CRANE TO DISCONNECT SWITCH
MINIMUM REQUIREMENTS
BOOM LENGTH SELLING PRICE
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
FT / LB RATINGMODEL
POWER BOOM EXTENSION
80 FT. OF 5/16"
POWER BOOM ELEVATION
(ALSO AVAILABLE IN FULLY HYDRAULIC VERSION. SEE HT30 PRICE SHEET).
WIRE ROPE
SPECIFICATIONS
25 FT PLUG IN REMOTE CONTROL PENDANT
ET30KX 5,000 30,000MAX CAPACITY (LB)
Boom Rest - Adjustable 18" - 26" for utility body
F.O.B: CINCINNATI, OHIOREV: FEB. 12,2013
SHIPPING WEIGHTMODEL
In Addition to Standard Corded Remote
Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
INSTALL WEIGHT
ET30KX
(OVER FOR OUTRIGGERS)(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width (For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width (For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
ET30KX
SUGGESTED SELLING PRICE LIST
PART #INSTALL WEIGHT WEIGHT SELLING PRICE
24962-CD 315# 380# $1,564.00
24962-PHE 450# 515# $4,408.00
WEIGHT SELLING PRICE43# $340.00
53# $408.00
EFFECTIVE DATE: NOV. 01,2011
DESCRIPTION
Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 142", retracted 94", vertical travel of 13 1/2" pin adjustment plus 12" crank adjustment.
Manual pullouts, hydraulic down with 2 way control valve, and electric/hydraulic pump and hoses. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 143", retracted 95", vertical travel of 20".
Fold Away Type - For Platform Body. Vertically extends from 28-1/2" to 44" plus 5" screw foot adjustment.
23962-2Pullout Type - 8" extension with 32" mounting tube. Vertically extends from 4 1/2" to 30" plus 5" screw foot adjustment.
PART #
DESCRIPTION
OUTRIGGER PACKAGES
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT25 Crane Bodies. Installation of outrigger cross tube is included at no additional charge.
OTHER MANUAL OUTRIGGERS
REV: FEB. 12,2013
23960-2
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
ET30KX
SUGGESTED SELLING PRICE LIST
POWER ROTATION - 360° CONTINUOUS
12V DC ELECTRIC / HYDRAULIC OPERATION
CAPACITY OVERLOAD SHUT-OFF SYSTEM SWIVEL SNATCH BLOCK WITH SAFETY HOOK
ANTI-TWO BLOCKING MASTER DISCONNECT SWITCH
24962 SERIES OUTRIGGERS - OR EQUIVALENT ET25KX 10,500 LB. GVWR CHASSIS
POWER MANUAL10' - 20' 6' 4' 1500# 1600# $16,392.00
SELLING PRICE$928.00
$1,324.00
PART # WEIGHT SELLING PRICE17576-36 197# $712.00
20381-2 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
POWER BOOM ELEVATION
STANDARD EQUIPMENT
POWER BOOM EXTENSION
ET25KX
SHIPPING WEIGHT
SPECIFICATIONS
ET25KX 5,000 25,000 80 FT. OF 5/16"WIRE ROPEFT / LB RATINGMAX CAPACITY (LB)MODEL
In Lieu of Standard Corded Remote
INSTALL WEIGHT
OPTIONS
Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
SELLING PRICE
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
In Addition to Standard Corded Remote
DESCRIPTION
(OVER FOR OUTRIGGERS)
BOOM EXTENSIONMODEL
REV: FEB. 12,2013
PRICES
25 FT PLUG IN REMOTE CONTROL PENDANT
MINIMUM REQUIREMENTS
(ALSO AVAILABLE IN FULLY HYDRAULIC VERSION. SEE HT25 PRICE SHEET).
25 FT X #2 GA BATTERY CABLE PLUS 4 FT FROM CRANE TO DISCONNECT SWITCH
BOOM LENGTH
Mounting Pedestal - 36" High for platform body
Boom Rest - Adjustable 18" - 26" for utility body
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
ET25KX
SUGGESTED SELLING PRICE LIST
ELECTRIC/HYDRAULIC CRANES
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
PART #INSTALL WEIGHT WEIGHT SELLING PRICE
24962-CD 315# 380# $1,564.00
24962-PHE 450# 515# $4,408.00
WEIGHT SELLING PRICE43# $340.00
53# $408.00
EFFECTIVE DATE: NOV. 01,2011
23960-2
DESCRIPTION
Pullout Type - 8" extension with 32" mounting tube. Vertically extends from 4 1/2" to 30" plus 5" screw foot adjustment.
Manual pullouts, hydraulic down with 2 way control valve, and electric/hydraulic pump and hoses. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 143", retracted 95", vertical travel of 20".
DESCRIPTION PART #Fold Away Type - For Platform Body. Vertically extends from 28-1/2" to 44" plus 5" screw foot adjustment.
REV: FEB. 12,2013
OUTRIGGER PACKAGES
23962-2
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT25 Crane Bodies. Installation of outrigger cross tube is included at no additional charge.
F.O.B: CINCINNATI, OHIO
OTHER MANUAL OUTRIGGERS
Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 142", retracted 94", vertical travel of 13 1/2" pin adjustment plus 12" crank adjustment.
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
ET25KX
SUGGESTED SELLING PRICE LIST
4,500 LB. MAXIMUM CAPACITY POWER ROTATION - 360° CONTINUOUS
18,000 FT LB RATING
12V DC ELECTRIC/HYDRAULIC OPERATION POWER BOOM EXTENSION
CAPACITY OVERLOAD SHUT-OFF SYSTEM SWIVEL SNATCH BLOCK WITH SAFETY HOOK
ANTI-TWO BLOCKING MASTER DISCONNECT SWITCH
80 FT OF 5/16" WIRE ROPE WITH SAFETY HOOK
24962 SERIES OUTRIGGERS - OR EQUIVALENT 10,500 LB GVWR CHASSIS
POWER MANUAL
8' - 16' 4' 4' 1020# 1150# $12,996.00
SELLING PRICE
$928.00
$1,324.00
PART # WEIGHT SELLING PRICE
21699-36 197# $712.00
20381-2 48# $276.00
EFFECTIVE DATE: NOV. 01,2011
MODEL
25 FT PLUG IN REMOTE CONTROL PENDANT
MINIMUM REQUIREMENTS
PRICES
BOOM LENGTHBOOM EXTENSION
SPECIFICATIONS
POWER BOOM ELEVATION
STANDARD EQUIPMENT
25 FT X #2 GA BATTERY CABLE PLUS 4' FROM CRANE TO DISCONNECT SWITCH
Boom Rest - Adjustable 18" - 26" - for utility body
INSTALL WEIGHT
SHIPPING WEIGHT SELLING PRICE
In Lieu of Standard Corded Remote
In Addition to Standard Corded Remote
(OVER FOR OUTRIGGERS)
ET18KX
DESCRIPTION
Mounting Pedestal - 36" High for platform body
OPTIONS
Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM
REV: FEB. 12,2013
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
ET18KX
SUGGESTED SELLING PRICE LIST
PART #INSTALL WEIGHT WEIGHT SELLING PRICE
24962-CD 315# 380# $1,564.00
24962-PHE 450# 515# $4,408.00
PART # WEIGHT SELLING PRICE23960-2 43# $340.00
23962-2 53# $408.00
EFFECTIVE DATE: NOV. 01,2011
Manual pullouts, hydraulic down with 2 way control valve, and electric/hydraulic pump and hoses. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 143", retracted 95", vertical travel of 20".
Pullout Type - 8" extension with 32" mounting tube. Vertically extends from 4 1/2" to 30" plus 5" screw foot adjustment.
Fold Away Type - For Platform Body. Vertically extends from 28-1/2" to 44" plus 5" screw foot adjustment.
OUTRIGGER PACKAGES
DESCRIPTION
OUTRIGGER PACKAGES FOR VENTURO HT CRANE BODIES - All of the above Outrigger Packages are available for Venturo HT Crane Bodies. Installation of outrigger cross tube is included at no additional charge.
OTHER MANUAL OUTRIGGERS
Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", two pullouts (36" curbside 12" streetside) total spread of 142", retracted 94", vertical travel of 13 1/2" pin adjustment plus 12" crank adjustment.
REV: FEB. 12,2013
DESCRIPTION
F.O.B: CINCINNATI, OHIO
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
ET18KX
SUGGESTED SELLING PRICE LIST
3,500 LB MAXIMUM CAPACITY POWER ROTATION - 360° CONTINUOUS
12,000 FT. LB. RATING
12V DC ELECTRIC / HYDRAULIC OPERATION
CAPACITY OVERLOAD SHUT OFF SYSTEM SWIVEL SNATCH BLOCK WITH SAFETY HOOK
ANTI-TWO BLOCKING MASTER DISCONNECT SWITCH
65 FT OF 1/4" WIRE ROPE WITH SAFETY HOOK
POWER MANUAL7' - 15' --- 4' + 4" 610# 680# $9,632.00
7' - 15' 4' 4' 700# 820# $10,604.00
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM SELLING PRICE$928.00
$1,324.00
SELLING PRICE
$156.00
Mounting Pedestal - 21" high for platform body $456.00
Mounting Pedestal - 36" high for platform body $516.00
BOOM REST Adjustable (13" - 19") with hook restraint $252.00
PART # WEIGHT SELLING PRICE18500-CD 225# $964.00
13500 24# $168.00
11822-2 31# $216.00
EFFECTIVE DATE: NOV. 01,2011
SELLING PRICE
TELESCOPIC BOOM - MANUAL (K) OR POWER EXTENSION (KX)
BOOM EXTENSION
25 FT PLUG IN REMOTE CONTROL PENDANT
ET12KX
POWER BOOM ELEVATION
STANDARD EQUIPMENT
25 FT X #2 GA BATTERY CABLE PLUS 4 FT FROM CRANE TO DISCONNECT SWITCH
PRICES
BOOM LENGTHMODEL
SPECIFICATIONS
WEIGHT
SIDE BRACKET TYPE - Single jackleg for utility body - Extends 0-24"
FOLD AWAY TYPE - Single jackleg for platform body - Extends 27"-45"
OUTRIGGERS
OPTIONS
INSTALL WEIGHT SHIPPING WEIGHT
REV: FEB. 12,2013
Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.DESCRIPTION
CRANKDOWN OUTRIGGER PACKAGE - Manual Pullout/Manual Crankdown. Full width mounting tube 3 1/2" x 3 1/2" x 88". Curbside pullout (28 1/2" extension), streetside permanent mount. Total spread of 126". Vertical travel of 13 1/2" pin adjustment plus 15 1/2 crank adjustment.
PART #
21440 30#
21571-21
In Lieu of Standard Corded Remote
In Addition to Standard Corded Remote
CAPACITY OVERLOAD ALARM (Capacity Overload Shut-Off System Standard)
DESCRIPTION
ET12K
95#
130#21571-36
17356
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver
MANUFACTURING, INC. 12110 BEST PLACE
CINCINNATI, OHIO 45241
SALES (800) 226-2238 [email protected]
FAX (513) 326-5427 www.venturo.com
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
ET12K ET12KX
SUGGESTED SELLING PRICE LIST
2,700 LB MAXIMUM CAPACITY @ 3' POWER ROTATION - 360° CONTINUOUS
8,000 FT. LB. RATING
12V DC ELECTRIC / HYDRAULIC OPERATION
CAPACITY OVERLOAD SHUT OFF SYSTEM SWIVEL SNATCH BLOCK WITH SAFETY HOOK
ANTI-TWO BLOCKING MASTER DISCONNECT SWITCH
65 FT OF 7/32" WIRE ROPE WITH SAFETY HOOK
POWER MANUAL
6' - 14' --- 4' + 4" 560# 630# $8,856.00
6' - 14' 4' 4' 650# 720# $9,748.00
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEM SELLING PRICE$1,056.00
$1,324.00
SELLING PRICE
$156.00
Mounting Pedestal - 21" high for platform body $456.00
Mounting Pedestal - 36" high for platform body $516.00
BOOM REST Adjustable (13" - 19") with hook restraint $252.00
PART # WEIGHT SELLING PRICE18500-CD 225# $964.00
13500 24# $168.00
11822-2 31# $216.00
EFFECTIVE DATE: NOV. 01,2011
Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
WEIGHT
BOOM LENGTH
130#
17356
30#
PART #
MODEL
In Lieu of Standard Corded Remote
21571-21 95#
In Addition to Standard Corded Remote
BOOM EXTENSIONSELLING PRICE
SPECIFICATIONS
POWER BOOM ELEVATION
STANDARD EQUIPMENT
TELESCOPIC BOOM - MANUAL (K) OR POWER EXTENSION (KX)
OUTRIGGERS
25 FT X #2 GA BATTERY CABLE PLUS 4 FT FROM CRANE TO DISCONNECT SWITCH
PRICES
SHIPPING WEIGHT
21440
ET8KX
20 FT PLUG IN REMOTE CONTROL PENDANT
INSTALL WEIGHT
ET8K
REV: FEB. 12,2013
OPTIONS
CAPACITY OVERLOAD ALARM (Capacity Overload Shut-Off System Standard)
21571-36
DESCRIPTION
DESCRIPTION
SIDE BRACKET TYPE - Single jackleg for utility body - Extends 0-24"
CRANKDOWN OUTRIGGER PACKAGE - Manual Pullout/Manual Crankdown. Full width mounting tube 3 1/2" x 3 1/2" x 88". Curbside pullout (28 1/2" extension), streetside permanent mount. Total spread of 126". Vertical travel of 13 1/2" pin adjustment plus 15 1/2 crank adjustment.
FOLD AWAY TYPE - Single jackleg for platform body - Extends 27"-45"
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
ET8K ET8KX
SUGGESTED SELLING PRICE LIST
1,900 LB. MAXIMUM CAPACITY POWER ROTATION - 322 DEGREES
6,650 FT. LB. RATING POWER BOOM ELEVATION
12V DC ELECTRIC HYDRAULIC OPERATION POWER BOOM EXTENSION
CAPACITY OVERLOAD SENSOR WITH AUDIBLE ALARM SWIVEL SNATCH BLOCK WITH SAFETY HOOK
50 FT. OF 3/16" WIRE ROPE WITH SAFETY LATCH MASTER DISCONNECT SWITCH
20 FT. PLUG IN REMOTE CONTROL PENDANT 25 FT X #4 GA BATTERY CABLE
POWER MANUAL
3' - 9'3" 3' 3" 3' 490# 535# $9,288.00
RADIO REMOTE CONTROLS WITH ONBOARD DIAGNOSTIC SYSTEMSELLING
PRICE$1,056.00
$1,324.00
PART #SELLING
PRICE18500-CD 225# $964.00
13500 24# $168.00
11822-2 31# $216.00
EFFECTIVE DATE: NOV. 01,2011 REV: FEB. 12,2013
DESCRIPTION
FOLD AWAY TYPE - Single jackleg for platform body - Extends 27"-45"
BOOM EXTENSION SELLING PRICE
Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
In Lieu of Standard Corded Remote
CRANKDOWN OUTRIGGER PACKAGE - Manual Pullout/Manual Crankdown. Full width mounting tube 3 1/2" x 3 1/2" x 88". Curbside pullout (28 1/2" extension), streetside permanent mount. Total spread of 126". Vertical travel of 13 1/2" pin adjustment plus 15 1/2 crank adjustment.
SIDE BRACKET TYPE - Single jackleg for utility body - Extends 0-24"
In Addition to Standard Corded Remote
SPECIFICATIONS
STANDARD EQUIPMENT
OUTRIGGERS
PRICES
CT310KX
BOOM LENGTH
OPTIONS
MODELINSTALL WEIGHT
SHIPPING WEIGHT
(For HT25KX) - Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting tube 6" x 4" x 81", two (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene bearing sides. (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene bearing sides. (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting tube 6" x 8" x 81", Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting erro
(For HT25KX) - Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting tube 6" x 4" x 81", two (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene bearing sides. (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene bearing sides. (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting tube 6" x 8" x 81", Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting erro (For HT25KX) - Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting tube 6" x 4" x 81", two (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene bearing sides. (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene bearing sides. (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting tube 6" x 8" x 81", Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting erro
(For HT25KX) - Manual pullouts, manual crank down. Full width mounting tube 6" x 4" x 81", (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting tube 6" x 4" x 81", two (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene bearing sides. (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene bearing sides. (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting tube 6" x 8" x 81",
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
CT310KX
SUGGESTED SELLING PRICE LIST
2200 LB. MAXIMUM CAPACITY MANUAL ROTATION WITH 8 POSITIVE PIN LOCK
7000 FT. LB. RATING
12V DC WINCH HEAVY DUTY, HIGH TORQUE, HIGH SPEEDMANUAL TELESCOPIC BOOM
50 FT OF 3/16" WIRE ROPE WITH SAFETY HOOK SWIVEL SNATCH BLOCK WITH SAFETY HOOK
6 - 10 FT 310#
SELLING PRICE
$420.00
$468.00
PART # WEIGHTSELLING
PRICE18500-CD 225# $964.00
13500 24# $168.00
11822-2 31# $216.00
EFFECTIVE DATE: NOV. 01,2011 *
PART #
15 FT PLUG IN REMOTE CONTROL PENDANT MASTER DISCONNECT SWITCH
SHIPPING WEIGHT
380#
25 FT X #2 GA BATTERY CABLE PLUS 4 FT FROM CRANE TO DISCONNECT SWITCH
BOOM LENGTHINSTALL WEIGHT SELLING PRICE
95#
Mounting Pedestal - 21" High for platform body
14930-36
65#
Mounting Pedestal - 36" High for platform body
OPTIONS
DESCRIPTION
REV: FEB. 12,2013
SIDE BRACKET TYPE - Single jackleg for utility body - Extends 0-24"
FOLD AWAY TYPE - Single jackleg for platform body - Extends 27"-45"
CRANKDOWN OUTRIGGER PACKAGE - Manual Pullout/Manual Crankdown. Full width mounting tube 3 1/2" x 3 1/2" x 88". Curbside pullout (28 1/2" extension), streetside permanent mount. Total spread of 126". Vertical travel of 13 1/2" pin adjustment plus 15 1/2 crank adjustment.
DESCRIPTION
SPECIFICATIONS
OUTRIGGERS
$4,440.00
PRICES
MANUAL 3 POSITION BOOM ELEVATION WITH SPRING COUNTER BALANCE
STANDARD EQUIPMENT
MODEL
14930-21
DT7K
WEIGHT(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver (For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver (For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver (For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver (For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
ELECTRIC/HYDRAULIC CRANES
DT7K
SUGGESTED SELLING PRICE LIST
2,000 LB. MAXIMUM CAPACITY
35 FT. OF 3/16" WIRE ROPE WITH SAFETY HOOK SWIVEL SNATCH BLOCK WITH SAFETY HOOK
15 FT. PLUG IN REMOTE CONTROL PENDANT 25 FT. X #4 GA BATTERY CABLE
MOUNTING SOCKET - TYPE C - SURFACE MOUNT
3 - 5 FT 235# 290# $2,652.004 - 7 FT 265# 320# $2,756.005 - 9 FT 280# 335# $2,856.00
MOUNTING SOCKETS:Type C, surface mount socket is standard. Type A, recessed mount is available at no extra charge.Note: If recessed mounting socket is used with CT2004FB, boom will not fold.
1317113172
SPECIFYSPECIFY
11645MASTER DISCONNECT SWITCH KIT 13451-KCIRCUIT BREAKER KIT, 150 AMP 22946-150
21040
PART # WEIGHT SELLING PRICE13500 24# $168.00
11822-2 31# $216.00
EFFECTIVE DATE: NOV. 01,2011 *
SELLING PRICE
2,000# - 1,000#
PRICES
BOOM LENGTHINSTALL WEIGHT
SHIPPING WEIGHT SELLING PRICEMODEL CAPACITY
MANUAL ROTATION WITH 8 POSITION POSITIVE PIN LOCK
$68.00
STANDARD EQUIPMENT
OPTION NUMBER
1,200# - 500#CT2004FB 1,500# - 700#CT2003FB
CT2005
DESCRIPTION
F.O.B: CINCINNATI, OHIOREV: FEB. 12,2013
SIDE BRACKET TYPE - Single jackleg for utility body - Extends 0-24"FOLD AWAY TYPE - Single jackleg for platform body - Extends 27"-45"
SPECIFICATIONS
SHORT MAST VERSIONS FOR CORNER UTILITY BODY MOUNTING AVAILABLE - SEE OPTIONS BELOW
12V DC WINCH, HEAVY DUTY, HIGH TORQUE, HIGHSPEED
6,000 FT. / LB. RATINGMANUAL TELESCOPIC FOLDING BOOM (CT2005 WILL NOT FOLD)
$204.00$1,108.00
EXTRA SOCKETS - TYPE "A" - Flush MountEXTRA SOCKETS - TYPE "C" - Surface MountSHORT MAST (Specify Height) CT SERIES ONLYAC DRIVE - CT SERIES ONLY
DESCRIPTION
OUTRIGGERS
DISPLAY STAND CONTACT SALES DEPARTMENT
OPTIONS AND ACCESSORIES
$72.00$48.00
QUICK DISCONNECT SOCKET & PLUG
$204.00$204.00
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW
(For HT25/40/50KX) - Hydraulic otravel of 20", includes 4 way control valve and hoes.
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
HEAVY DUTY MAST CRANE SERIES
CT2003FB CT2004FB CT2005
SUGGESTED SELLING PRICE LIST
control valve and hoes.
2,000 LB MAXIMUM CAPACITY (1,500 LB FOR 120V AC WINCH) MANUAL ROTATION WITH BAND BRAKE
6,000 FT. LB. RATING MANUAL 3 POSITION BOOM ELEVATION
12 V DC WINCH (110V AC WINCH AVAILABLE) MANUAL TELESCOPIC FOLDING BOOM
35 FT OF 3/16" WIRE ROPE WITH SAFETY HOOK - Standard Winch SWIVEL SNATCH BLOCK WITH SAFETY HOOK
65 FT OF 3/16" WIRE ROPE WITH SAFETY HOOK - Heavy Duty Winch 25 FT X #4GA BATTERY CABLE
12 FT PLUG IN REMOTE CONTROL PENDANT
CE6K-3 19600-3-DC 3' - 5' Standard 12V TALL 325# 355# $2,475.00
CE6K-3 19600-3-DC-S 3' - 5' Standard 12V SHORT 220# 290# $2,456.00
CE6K-3/HD 19600-3-DCHD 3' - 5' Heavy Duty 12V TALL 265# 335# $3,124.00
CE6K-3/HD 19600-3-DCHD-S 3' - 5' Heavy Duty 12V SHORT 230# 300# $3,100.00
CE6K-3/AC 19600-3-AC 3' - 5' 120V AC TALL 255# 325# $2,724.00
CE6K-4 19600-4-DC 4' - 7' Standard 12V TALL 275# 345# $2,588.00
CE6K-4 19600-4-DC-S 4' - 7' Standard 12V SHORT 235# 305# $2,560.00
CE6K-4/HD 19600-4-DCHD 4' - 7' Heavy Duty 12V TALL 280# $3,224.00
CE6K-4/HD 19600-4-DCHD-S 4' - 7' Heavy Duty 12V SHORT 240# 310# $3,204.00
CE6K-4/AC 19600-4-AC 4' - 7' 120V AC TALL 280# 350# $2,824.00
SELLING PRICE
$48.00
$68.00
Contact Sales
PART #SELLING
PRICE
13500 $168.00
11822-2 $216.00
EFFECTIVE DATE: NOV. 01,2011 *
SPECIFICATIONS
DESCRIPTION PART # WEIGHT
MODEL MASTBOOM LENGTH WINCHINSTALL WEIGHT
1#
35#
STANDARD EQUIPMENT
OPTIONS AND ACCESSORIES
SHIPPING WEIGHT
PRICESSELLING
PRICE
MASTER DISCONNECT SWITCH KIT
CIRCUIT BREAKER KIT, 150 AMP
DISPLAY STAND
24#
PART#
FOLD AWAY TYPE - Single jackleg for platform body - Extends 27"-45"
13451-K
22946-150
21040
1#
REV: FEB. 12,2013
SIDE BRACKET TYPE - Single jackleg for utility body - Extends 0-24"
31#
OUTRIGGERS
WEIGHTDESCRIPTION
(For HT25KX) - Manual pullouts, manual crank down. Full width mounting (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting tube 6" (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting tube Wireless pistol grip transmitter and compartment mounted receiver with (For HT25KX) - Manual pullouts, manual crank down. Full width mounting (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting tube 6" (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting tube Wireless pistol grip transmitter and compartment mounted receiver with (For HT25KX) - Manual pullouts, manual crank down. Full width mounting (For HT25KX) - Manual pullouts, hydraulic down. Full width mounting tube 6" (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT40/50KX) - Manual pullouts with heavy duty UHMW polyethylene (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width mounting tube Wireless pistol grip transmitter and compartment mounted receiver with
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
MEDIUM DUTY & HEAVY DUTY MAST CRANE SERIES
CE6K
SUGGESTED SELLING PRICE LIST
1,500 LB MAXIMUM CAPACITY MANUAL 360° ROTATION WITH BAND BRAKE
4,500 FT. LB. RATING
WINCH/WIRE ROPE (See Below) BATTERY CABLES WITH TERMINALS
SWIVEL SNATCH BLOCK WITH SAFETY HOOK MOUNTING BOLTS AND PLATES
HANDSAVER BAR
80 AMP CIRCUIT BREAKER
CE1500FB CE-057 25' x 3/16" 165# 220# $1,768.00
CE1500FB-AC CE-057-AC 45' x 5/32" 165# 220# $2,112.00
EFFECTIVE DATE: NOV. 01,2011 REV: OCT. 18,2012 *
PRICES
VENTURO CE1500FB SPECIFICATIONS
CE1500FB STANDARD EQUIPMENT
PISTOL GRIP, REMOVABLE PENDANT CONTROL WITH 12 FT CORD
MANUAL 3' - 5' TELESCOPIC FOLDING BOOM
CHOICES OF WINCHES: 12 VOLT DC, 120 VOLT AC
120V-AC
SELLING PRICEMODEL PART # WINCH
12V-DC
WIRE ROPE
INSTALL WEIGHT
SHIPPING WEIGHT
(For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver (For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver (For HT25KX) - Manual pullouts, manual crank down. Full width (For HT25KX) - Manual pullouts, hydraulic down. Full width (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT40/50KX) - Manual pullouts with heavy duty UHMW (For HT25/40/50KX) - Hydraulic out, hydraulic down. Full width Wireless pistol grip transmitter and compartment mounted receiver
12110 BEST PLACE CINCINNATI, OHIO 45241 SALES: (800) 226-2238 FAX: (513) 326-5427 [email protected] www.venturo.com
LIGHT DUTY MAST CRANE SERIES
CE1500FB
SUGGESTED SELLING PRICE LIST