09 chemical

247

Adhesive Tapes 248

Anti-Spatter 249

Cold Galvanising Paint 250

Flawcheck System 250

Hand Cleaners 251

Lube Pads 252

Lubricants 253

Pickling Paste 255

Paint Products 256

Soapstone and Chalk 257

Tempilsticks 258

Chemical products

Section Nine

248

SE

CTIO

N N

INE

– C

HE

MIC

AL P

RO

DU

CTS

ADHESIvE TAPES

MASKING TAPE – 18MM X 50MTR

PN: U70618-B

18mm x 50mtr•Pack Quantity: 10Carton Quantity: 100


PN: U70636-B



PN: U70648-B


DUCT TAPE – 48MM X 30MTR

PN: SJT60

48mm x 30mtr•Sealing and Joining Tape•

Pack Quantity: 5Carton Quantity: 60

ELECTRICAL TAPE – 18MM X 20MTR

PN: RB31BLK.10 (Black)PN: RB31RED.10 (Red)PN: RB31WHI.10 (White)PN: RB31ERT.10 (Earth, Yellow/Green)

18mm x 20m•Available in various colours•Pack Quantity: 10Carton Quantity: 100

PLUMBERS THREAD SEAL TAPE – 12MM X 10MTRS

PN: PLTF

12mm x 10m•Thread Seal Tape•Not suitable for gas equipment•Pack Quantity: 10Carton Quantity: 100

249

SE

CTIO

N N

INE

– CH

EM

ICA

L P

RO

DU

CTS

ANTI SPATTER – UNIMIG AEROSOL

PN: UNIAS

Silicone Free•Non-flammable•Contains no CFC’s •Aerosol Can, 400g•

Pack Quantity: eachCarton Quantity: 25

ANTI SPATTER – WELD KLEEN Heavy Duty Aerosol

PN: 007030

Heavy Duty Aerosol•Non-flammable•591 ml can•


ANTI SPATTER – WELD KLEEN 350 PRE-MIXED

PN: 007090

Water Based•Environmental friendly•Non-flammable•4 LTR•


ANTI-SPATTER

CALGUARD NOZZLE DIP

PN: 1460/40

Nozzle dip gel, for the prevention •of spatter adhering to sensitive components of welding torches, including the interior and exterior of MIG nozzles, the end and outer surfaces of contact tips and positional fixtures.Non-toxic•400g tub•


BINZEL NOZZLE DIP

PN: 192 0058

Easy to•300g containers•


ANTI SPATTER – WELD KLEEN 350 PRE-MIXED

PN: 007091

Water Based•Environmental friendly•20 LTR•

Pack Quantity: each

ANTI SPATTER - S WELD SPATTERGUARD (Solvent Based)

PN: 1450/51

Non-flammable agent for the •prevention of weld spatter adhering to metal surfaces during the welding process.Suitable for a range of steels, including •mild steel, stainless steel, aluminum and high performance alloysS-Weld Spatter Guard avoids the need •for mechanical abrasion or grinding of weld spatter following welding.Contains corrosion inhibitors for base •metal protectionS-Weld increases the life cycle of torch •components saving time and moneyEliminates spatter build up which •results in poor gas flow causing pitting porosity.Solvent Based•20 LTR•

Pack Quantity: each

250

SE

CTIO

N N

INE

– C

HE

MIC

AL P

RO

DU

CTS

FLAwCHECk SySTEM

FLAWCHECK PRECLEANER BEIGE – STEP 1

PN: 19013501Detects cracks and flaws •not seen to the naked eyeFlawcheck method is fast •and efficient Step 1 – Preclean•Aerosol Can•


FLAWCHECK PENETRANT RED – STEP 2

PN: 19013502Step 2 – Penetrant•Aerosol Can•


FLAWCHECK REMOVER BLUE – STEP 3

PN: 19013503Step 3 – Remover•Aerosol Can•


FLAWCHECK DEVELOPER WHITE – STEP 4

PN: 19013504Step 4 – Developer•Aerosol Can•


FLAWCHECK KIT– STEPS 1, 2, 3, 4

PN: FLAWKITComplete 4-step kit in a set

COLD gALvANISINg PAINT

SILVER ZINC (Gloss Finish Cold Gal Spray)

PN: W0100

LIQUID ZINC (Matte Finish Cold Gal Spray)

PN: W0101

YELLOW ZINC (Cold Gal Spray)

PN: W0106

98.5% Zinc purity•Industrial strength zinc rich coating •containing metallic zincProtects steel in the same manner as •hot dip galvanising i.e. by cathodic reactionGloss Finish Cold Gal Spray•400gm Aerosol spray Can•


BLUE ZINC (Cold Gal Spray)

PN: W0104

98.5% Zinc purity•Industrial strength zinc rich coating •containing metallic zincProtects steel in the same manner as •hot dip galvanising i.e. by cathodic reactionGloss Finish Cold Gal Spray•400gm Aerosol spray Can•


COLD GAL PAINT

PN: W0115

1 LTR tin•Matte finish•


251

SE

CTIO

N N

INE

– CH

EM

ICA

L P

RO

DU

CTS

HAND CLEANERS

Extra heavy duty industrial hand •cleanerEfficient and speedy removal of •ingrained contaminants such as tar, grease, carbon, varnish and paint.Contains lanolin to prevent industrial •dermatitis, dryness and cracking of handsContains pumice powder, a mineral •abrasive, providing a fast working efficient hand cleaner4L or 20kg cartridge packs available •

4L Pack Quantities: each 20KG Pack Quantity: each4L Carton Quantity: 420KG Carton Quantity: N/A

SEPTONE PROTECTA PINK – No Grit

PN: IHPP4 (4L)

PN: IHPP20 (20kg)

SEPTONE PROTECTA PINK – with Grit

PN: IHPG4 (4L)

PN: IZD4KM (Metal pump suit 4L)PN: IZD20KM (Metal pump suit 20KG)

PN: IHPG20 (20KG)

SEPTONE CITRA SCRUB – with Grit

PN: IHCS4 (4L)

PN: IHCS20 (20KG)

252

SE

CTIO

N N

INE

– C

HE

MIC

AL P

RO

DU

CTS SEPTONE CONICAL SPRAY BOTTLE

PN: HZSAC

Heavy duty pump•Clear bottle•


LUbE PADS

WELD KLEEN LUBE PADS – RED

PN: 007 061Cleans• wire before entering drive systemSuitable for Aluminium, Stainless steel •and mild steelOffers no lubrication to wires – Strictly •cleaning onlyFits over all wire sizes •


WELD KLEEN LUBE PADS – BLACK

PN: 007 060Lubricates• wire before entering drive systemSuitable for Mild steel and most •fabricated wiresNot to be used on Aluminium or •Stainless steelFits over all wire sizes •


253

SE

CTIO

N N

INE

– CH

EM

ICA

L P

RO

DU

CTS

INOX MX8 PTFE GREASE

PN: 8020 500g

500g tube•Has the ability to prevent scuffing and •reduce wear under high load and shock load conditions, together with its excellent high shear stability and high temperature operation, makes INOX-mx8 the preferred choice over other extreme pressure greases.INOX-mx8 resists ‘Squeeze out’ from •surfaces requiring lubrication under load conditions.Has excellent resistance to water •and water wash out even at elevated temperatures. Effective lubrication is maintained and in these situations it also gives protection against rusting and corrosion.Will not thin out because it is shear •resistant or thicken because it resists oxidation.P.T.F.E – Polytetrafluroethylene is a •premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures to bearings, brushes, shafts, gears, chains, splines, PTO’s, turntables, cables, universals, CV and ball joints.


LUbRICANTS

INOX MX8 PTFE GREASE

PN: 8000 450g

450g tube•Has the ability to prevent scuffing and •reduce wear under high load and shock load conditions, together with its excellent high shear stability and high temperature operation, makes INOX-mx8 the preferred choice over other extreme pressure greases.INOX-mx8 resists ‘Squeeze out’ from •surfaces requiring lubrication under load conditions.Has excellent resistance to water •and water wash out even at elevated temperatures. Effective lubrication is maintained and in these situations it also gives protection against rusting and corrosion.Will not thin out because it is shear •resistant or thicken because it resists oxidation.P.T.F.E – Polytetrafluroethylene is a •premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures to bearings, brushes, shafts, gears, chains, splines, PTO’s, turntables, cables, universals, CV and ball joints.


INOX 5L TIN

PN: INOX5L

Heavy Duty lubricant•5L Tin•


INOX 20L DRUM

PN: INOX20L

Heavy Duty lubricant•20L Drum•

Pack Quantity: eachCarton Quantity: N/A

254

SE

CTIO

N N

INE

– C

HE

MIC

AL P

RO

DU

CTS

LUbRICANTS

METAL WORKING COMPOUND

PN: M833

25g Jar•A superior low melting point •metalworking compound Contains Molybdenum Disulphide •Use with all metals and alloys such as •titanium and nimonics


NICKEL ANTISIEZE

PN: M825

450g tin•A special nickel based anti-seize •compound formulated to protect against seizure of metal partsIt is recommended for use with •stainless steel and other alloys where a copper based anti-seize is unsuitable.


NEODROL HPNZ AIR TOOL OIL

PN: PG1LHPNZ

1L•Pack Quantity: eachCarton Quantity: 12

LANOSEAL LANOLIN SPRAY 400g

PN: LANOAERO

Suitable for Rubber, vinyl, steel and •many other productsSpray Can•


THREAD SEALANT

PN: XS6701

Yellow paste type•Suitable for gas fittings•Alternative to thread tape•Suitable for brass and steel threads •plus many other products60g tube•


MCC CUTTING COMPOUND

PN: 40004

450g Tin•For metal working•Used for tapping, threading, sawing, •reaming, broaching, drawing, pressing, extruding, forging and forming


255

SE

CTIO

N N

INE

– CH

EM

ICA

L P

RO

DU

CTS

SOLUBLE CUTTING OIL – GARRICK

PN: SOL5 (5L)

5L Carton Quantity: 4

LUbRICANTS

PN: SOL20 (20L)

Available in a 5L or 20L Bottle•A milky white, non-phenolic, general •purpose water miscible cutting fluid

Pack Quantity: each

SILICON GREASE

PN: M832

25g Jar•A high performance silicone-based •translucent non-toxic paste developed for use as a lubricant and protectant for rubber and metalNon conductive•Water resistant•Protects against corrosion•


PICkLINg PASTE

S-WELD CLEAN PICKLING PASTE

PN: 110/30 (1kg)

PN: 110/78 (2.5kg)

PN: 110/51 (25kg)

S-Weld Clean utilises innovative •Australian technology for the formulation of a high adhesion stainless steel pickling gel.It is used to remove the black oxide •marks or burn scale left during welding of stainless steel.S-Weld Clean leaves a clean •professional finished stainless steel weld area.Available in three quantity sizes•Local Government Chemical/•dangerous goods license may be required to purchase, use and/or store this product.


PICKLING PASTE BRUSH

PN: PPB

Long plastic handle•Use with s-weld clean pickling paste/ •gel

Pack Quantity: eachCarton Quantity: N/A

256

SE

CTIO

N N

INE

– C

HE

MIC

AL P

RO

DU

CTS

PAINT PRODUCTS

SPRAY N MARK

PN: 40013502 (Red)PN: 40013504 (Green)PN: 40013506 (Orange)

Red, green or orange spray cans •available Fast and Convenient•Fitted with a ‘trigger cap’•The double action valve will enable •you to obtain both wide and narrow marks as required for your application350g cans•


ODD JOBS SPRAY ENAMEL

PN: OJCHRM (chrome)PN: OJYLW (yellow)PN: OJDKGRN (dark green)PN: OJORG (orange)PN: OJDKBL (dark blue)PN: OJCL (claret)PN: OJWH (white)PN: OJRD (red)PN: OJGRY (grey primer)PN: OJSATBLK (satin black)PN: OJMATBLK (matte black)PN: OJGLSBLK (gloss black)PN: OJGLSGLD (gloss gold)

Spray Cans•Various colours available •350g cans•


DY-MARK BALLMARKER INK T400 1L

PN: 11010105 YellowPN: 11010111 WhitePN: 11010101 Black

1L bottle•Ballmarker Ink•Opaque, waterproof, lightfast and •extremely durable in all environment conditionsWill mark on any surface, penetrating •grease, oil and rust


DY-MARK BALLMARKER – Empty Applicator with 4mm Ball Tip

PN: 11030412

A marker that will give a permanent •lightfast mark on steel, timber, tyres etc.The Dy-Mark Ballmarker features a •unique spring loaded ball valve writing head with ink feed controlled by a flexible “squeeze flow” plastic bottle.Hardened tips mean long life and •good economy.Supplied empty, fill with Dy-Mark •Ballmarker ink.


257

SE

CTIO

N N

INE

– CH

EM

ICA

L P

RO

DU

CTS

BOSS SPLIT CHALK/ SOAPSTONE

PN: 800022

High quality chalk•Grinds easily for shaping•Used in heavy industrial applications•

Pack Quantity: 100pcsCarton Quantity: 5 boxes

WELDMASTER SPLIT CHALK/ SOAPSTONE

PN: SS125

Weldmaster chalk (soap stone) is •No 1 select grade material with a standard harness level throughout each piece.Size mm: 12x5•


IRWIN STRAIT LINE CHALK

PN: 20/64907 (Green)PN: 20/64905 (Orange)

227g bottle•Green or Orange available •


CHALK HOLDERS

PN: SSH

Use with 12x5 split type chalk•Pack Quantity: 1Carton Quantity: 100

SOAPSTONE AND CHALk

HILIGHT ENGINEERING CHALK – WHOLE

PN: 800016



HILIGHT ENGINEERING CHALK – SPLIT

PN: 800018



BOSS WHOLE CHALK /SOAPSTONE

PN: 800020



258

SE

CTIO

N N

INE

– C

HE

MIC

AL P

RO

DU

CTS

TEMPILSTICkS

PENCILS

TEMPILSTIK° TEMPERATURE INDICATORS – are made of materials with melting points calibrated to a guaranteed tolerance of +/- 1%. There are a total of 103 temperature ratings systematically spaced between 38°C/100°F and 2500°C/1371°F.

Most can be certified to be lead free and sulfur free. Every Tempilstik° is traceable by lot number to the specific batch of raw material from which it is made.HOW TO USEWhen working below 371°C on relatively rough surfaces, where prolonged heating is not required, the simplest method is to mark the workpiece before heating begins. The dry opaque Tempilstik° mark will change to a distinct melted mark; this phase change will occur when the temperature rating of the selected Tempilstik° has been reached.

Caution: Disregard any colour change during heating process; it is only the melting of the Tempilstik° mark that indicates the temperature has been reached.

When working on temperatures above 371°C or under prolonged heating, the Tempilstik° mark may evaporate or be absorbed. Under these conditions, stroke the workpiece with the selected Tempilstik° from time to time during the heating operation. When the rated temperature has been reached, it will leave a liquid smear.CLEANINGFor temperatures less than 343°C, clean the Tempilstik° off the workpiece by using alcohol or water, for temperatures over 343°C, clean the Tempilstik° off the workpiece by using water only.

TEMPILSTIK°

PN: TSC0150 – 150 DEGREES





Many other temperature ratings available upon request Pack Quantity: 10Carton Quantity: 100

SILVER WELDERS PENCIL

PN: WP103 Blister card 3 pencilsPN: WP112 Box Pack of 12 PencilsSilver welders pencils are ideal for fine layout work on all metals. The lines pick up light and are visible even in low light conditions.

Marks will illuminate when cutting or •weldingLines will not melt, fade or rub off•Pencils will not break like chalk•Easy to sharpen with standard •sharpenerCan be painted over•Highly visible through shaded welding •lens

09 chemical

Documents