1 ~ 20 kva 1 phase / 1 phase uninterruptible power supply · · 2017-11-10dsp microprocessor...

NETPRO-11 Series

Uninterrupted Power Uninterrupted Service

Customized Input/Output OptionsAdvanced Remote Monitoring and Management via SNMPParallel / Redundant OperationGalvanic Isolation TransformerMaintenance By-Pass

EN 62040-1 (Safety), EN 62040-2 (EMC)

DSP Microprocessor ControlledTrue On-Line Double ConversionIGBT RectifierActive Input Power Factor Correction (≥0,99)Low Input Current THDi (<%3)Wide Input Voltage Range (± %25)Generator Compatible Operation Low Output Voltage THDv (<%3)High Efficiency (Normal Operation Up To 92%)Highest Efficiency with Smart Eco-Mode Operation(%98)Low Response Time (<2ms)Start on Battery (Cold Start)Short Circuit, High-Low Voltage, Overload ProtectionStandard Static By-PassIntelligent Battery Management Software EMI / RFI FilterSmart Fan ControlLCD Panel & LED Operation Mode DiagramRS232 Communication

SOUND & IMAGESYSTEMS

MEDICALEQUIPMENT

ELECTRICALHOUSE UNIT

OFFICEEQUIPMENS

MARINEEQUIPMENT

TV & VIDEOSYSTEMS

ELECTRONICSCALES

LIGHTINGSYSTEMS

MADE IN

TURKEYTSEK K O S G E B

SERVO-MATiKELEKTRON�K S�STEMLER SAN. ve T�C. LTD. �T�.

www.servomatik.com - [email protected]

GENERAL FEATURES

OPTIONAL FEATURES

STANDARDS

100% Made In TURKEYEnvironment Friendly DesignLow Installation and Operational Costs Low Weight&DimensionsEasy Maintenance and Service 10 Years Spare Part Warranty7/24 Technical Support and Customer Services

1 ~ 20 kVA 1 Phase / 1 Phase

Uninterruptible Power Supply

Servo-Matik Elektronik Sistemler San. Tic. Ltd. Şti.Ortabayır Mah. Dereboyu Cad. No:110 Gültepe - Kağıthane - Istanbul - Turkey

Mobile: +90 533 292 09 61 Phone: +90 212 211 22 85 Fax: 0212 212 17 93 [email protected] www.servomatik.com

TECHNICAL SPECIFICATIONS

New GenerationUninterruptible Power SupplyNETPRO-11

SERVO-MATİK Elektronik Sistemler San. Tic. Ltd. Şti. keeps the right to change the information on this document without any notice.

Model NETPRO-11Power 1 kVA 3 kVA 6 kVA 10 kVA 20 kVA

INPUTVoltage 120 VAC ~ 275VAC ( 1P + N )

Frequency 45 ~ 65 Hz

Input Power Factor > 0,99

THDi < 3%

OUTPUTVoltage 220 VAC + 1% ( 1P + N )

Frequency 50/60 Hz ± 0,2

Power Factor 0,9

Crest Factor 3:1

Waveform Pure Sine

THDv < 3% ( linear load) < 5% ( non-linear load )

STATIC BY-PASSTransfer Time 0 ms

Overload Capacity 10 min. at 125% load / 1 min. at 150% load / 25 sec. at 200% load

Protection Overload, Short Circuit

BATTERYVoltage

Type Maintenance Free Dry Type

Back Up Time Selectable

GENERALTechnology On-Line Double Conversion

Control DSP Microprocessor Controlled, High Frequency PWM

Up To 92%

Parallel Operation Optional

Redundant Operation Optional

Protection Overload, Over Temperature, Input/Output Short Circuit Protection

COMMUNICATIONDisplay 2x16 Character LCD Display / 4x20 Character LCD Optional ( Different Language Options )

Alert/ Event Normal Operation Datas, Battery Low, Overload, UPS Fault

Advanced Communication RS232, SNMP ( Optional )

Software Netpro PC Software

ENVIRONMENTOperating / Storage Temperature Range

Relative Humidity 0% ~ 95% ( Non-Condensing )

Noise < 50 db

Altitute ≤ 2000 m

Protection Class IP21 (Standard) - IP65 (Optional)

12 VDC

15 kVA

-10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

2 kVA


Customized Input/Output OptionsAdvanced Remote Monitoring and Management Options via SNMPParallel / Redundant OperationGalvanic Isolation Transformer

EN 62040-1 (Safety), EN 62040-2 (EMC)

DSP Microprocessor ControlTrue On-Line Double ConversionIGBT RectifierActive Input Power Factor Correction (≥0,99)Low Input Current THDi (<%3)Wide Input Voltage Range (± %25)Generator Compatible Operation Low Output Voltage THDv (<%3)High Efficiency (Normal Operation Up To 92%)Highest Efficiency with Smart Eco-Mode Operation(%98)Low Response Time (<2ms)Start on Battery (Cold Start)Short Circuit, High-Low Voltage, Overload ProtectionStandard Static & Maintenance By-PassIntelligent Battery Management Software EMI / RFI FilterSmart Fan ControlLCD Panel & LED Operation Mode DiagramRS232 Communication

INDUSTRIALAPPLICATIONS

COMUNICATIONSYSTEMS

NETWORKSYSTEMS

EMERGENCYSYSTEMS

SATELLITESYSTEMS

SATELLITERECEIVERS

MEDICALDEVICES

FIRE & ALARMSYSTEMS

NETPRO-31 Series10 ~ 20 kVA 3 Phase / 1 Phase


MADE IN


SERVO-MATiKELEKTRONİK SİSTEMLER SAN. ve TİC. LTD. ŞTİ.


GENERAL FEATURES

OPTIONAL FEATURES

STANDARDS

100% Made In TURKEYEnvironment Friendly DesignLow Weight&DimensionsLow Installation and Operational Costs Easy Maintenance and Service 10 Years Spare Part Warranty7/24 Technical Support and Customer Services





Uninterruptible Power SupplyNew GenerationNETPRO-31

Model NETPRO-31Power 10 kVA 20 kVA

INPUTVoltage 380 VAC ± 20% ( 3P + N )

Frequency 45 ~ 65 Hz

Input Power Factor ≥ 0,99

THDi <3%

OUTPUTVoltage 220 VAC + 1% ( 1P + N )

Frequency 50/60 Hz ± 0,2

Power Factor

Crest Factor 3:1

Waveform Pure Sine

THDv < 3% ( Linear Load ) / < 5% ( Non-Linear Load )


Overload Capacity 150%

Protection Overload, Short Circuit

BATTERYVoltage / Quantity Standard / 16 pcs. 12V


Back Up Time Selectable


Control DSP Microprocessor Controlled, High Frequency PWM

> 92%

Parallel Operation Optional


Protection Overload, Over Temperature, Input/Output Short Circuit Protection

COMMUNICATIONDisplay 2x16 Character LCD Display / 4x20 Character LCD Optional ( Different Language Options )

Alert/ Event Normal Operation Datas, Battery Low, Overload, UPS Fault

Advanced Communication RS232, SNMP ( Optional )




Altitute ≤ 2000 m

Noise < 50 dB


-10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

0,9

15 kVA

NETPRO-RM Series1 ~ 20 kVA Rack Mountable



Custom input & output optionsRemote control and monitoring via SNMP USB to PC connectivityParallel / Redundant operationLong backup time

EN 62040-1 (Safety), EN 62040-2 (EMC)High voltage IEC 60664-1 and IEC 1000-4-5: Class 3EMI EN 55022: Class AESD IEC 1000-4-2: Class 3EFT IEC 1000-4-4: Class 3RS IEC 1000-4-3: Class 3

High frequency online double conversion technologyHigh efficiencyIGBT rectifier designAdvanced microprocessor control with PWM techniqueWide input voltage range (110-285VAC)Active Power Factor Correction (PFC) at input (≥0,99)Output power factor 0.9Sensitive protection with EMI/RFI filtersSelf diagnostics feature at startStart from battery (Cold Start)Advanced battery management system (ABM)Standart static By-PassIntellectual fan controlled cooling systemLightning and voltage spike protectionOutput short cicuit, overload, output low voltage protection Low battery voltage, high output voltage, overheating protectionGenerator comapatible operationIntellectual communication with PC via RS232 port (USB,SNMP Optional)

DATACENTERS

MEDICALSYSTEMS


SERVERROOMS

AUTO CONTROLSYSTEMS

TELECOMSYSTEMS

COMMUNICATIONSYSTEMS

RADIO & TVSTATIONS

MADE IN




GENERAL FEATURES

OPTIONAL FEATURES

STANDARTS True Online Double Conversion design based NETPRO-RM Series UPS provide sensitive protection for critical loads.

At most unfavorable mains conditions with wide input voltage range, with fast response to voltage surge and spikes, and with perfect output characteristics protection for your servers and workstations is provided.



TECHNICAL CHARACTERISTICS

Rack MountableUninterruptible Power SupplyNETPRO-RM

Model NETPRO-RMNominal Power 1 kVA / 900W 2 KVA / 1.8kW 3 KVA / 2.7kW

INPUTPhase Count 1

Nominal Voltage 220 VAC / 230 VAC / 240VAC

Input Voltage Range 176 ~ 271 VAC ( at %100 load ) - 130 ~ 286 VAC ( at %50 load )

Nominal Frequency 50/60 Hz ± %10

Input Power Factor <0.99

Input Current Harmonics THDi <%3

OUTPUTNominal Voltage 220 VAC / 230 VAC / 240 VAC ± %1.5

Nominal Frequency 50/60 Hz ± 0,1 (on battery mode)

Output Power Factor 0,9

Crest Factor 3:1

Output Waveform Pure sine wave

Output Voltage Harmonics THDv < %2 ( linear load ) / < %4 ( non-linear load )

Overload Capacity Continuous for up to %110 load, 1 min at %110~150 load, 200 ms for load > %150


Overload Capacity % 150

Protection Overload, Short cicuit

BATTERYBattery Volage / Quantity 24 VDC 2X12VDC 72VDC 6X12VDC

Battery Charge Current 1 A ( 3 A Optional )

Battery Type Maintenance free dry batteries

Backup Time Varying

GENERALTechnology On-Line double conversion

Control Microprocessor controlled, high frequency PWM

Efficiency > %88

Paralell Operation Optional


Protection Output short circuit | Overload | Low output voltage | Low batery voltage | High output voltage | Overheating

COMMUNICATIONDisplay LCD Panel and LED indicators

Warnings / Events AC Abnormal, Low battery, Overload, Error / Fault

Advanced Communications RS232, SNMP and USB ( Optional )

ENVIRONMENTOperating / Storage Temperature -10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

Relative Humidity %0 ~ %95 (Non-condensing)

Altitude ≤ 2000 m

Acoustic Noise < 50 db (from 1 m distance) < 55 db (from 1 m distance)

Protection Class IP20

PHYSICAL PARAMETERSWeight 15 kg. 28,5 kg. 19 kg.

Dimensions (WxDxH) mm 440 x 468 x 88

6 KVA / 5,4kW 10 KVA / 9kW

48 VDC 4X12VDC 192VDC 16X12VDC 192VDC 16X12VDC

33,5 kg.

440 x 690 x 88 483 x 565 x 132

4 A ( 8 A Optional )



Remote monitor and control with SNMPProgrammable dry contactsGPRS modem / MOD BUS optionsEasy scaling with parallelling optionsIsolation transformersCustom input / output options

EN 62040-1 (Safety), EN 62040-2 (EMC), EN 62040-3

Advanced microprocessor controlTrue online double conversion DSP controlled IGBT rectifier and inverterActive Power Factor Correctoin (PFC) ≥ 0.99Low input THDi <%3 for perfect generator compatibilityLow output THDv <%2-5 for perfect energyPerfect compatibility with loads of different power factorsAccept dual mains inputs Wide input voltage range (110 - 300 VAC)High efficiency up to %92Reliable parallel/redundant operation with load syncronizationIntellectual fan controlEMI / RFI filtersShort circuit, overload, high/low voltage protectionStart from battery (Cold Start)Selectable backup timeBattery deep discharge protectionTemperature controlled chargeStandart static and manual By-PassAdvanced error/fault identificationAdvanced PC connectivity with RS232 / USB

FABRICS HOTELS SERVER ROOMS

SHOPPINGCENTERS

MILITARYSYSTEMS


HOSPITALS

EMERGENCYSYSTEMS

NETPRO-33H Series10 ~ 30 kVA 3 Phase / 3 Phase


MADE IN




GENERAL FEATURES

OPTIONAL FEATURES

STANDARTS

H

100% Made in TURKEYEnvironment Friendly Design, The Most Silent in Its ClassLow Installation and Operation CostsEasy Maintenance and Service10 Years Spare Part Availability7/24 Technical Service and Customer Services

New Generation High FrequencyUninterruptible Power SupplyNETPRO-33H

TECHNICAL SPECIFICATIONSModel NETPRO-33HNominal Power ( kVA ) 10 15 30INPUT

Nominal Voltage / Phase Count 220/380 VAC / 230/400 VAC / 240/415 VAC ( 3 Phase + Neutral )

Input Voltage Range 310-500 VAC

Nominal Frequency 50 Hz / 60 Hz

Frequency Tolerance ± %10

Input Power Factor >0,99

Total Harmonic Distortion THDi < %5

OUTPUTNominal Voltage / Phase Count

Voltage Tolerance ± %1


Frequency Tolerance 50 Hz / 60 Hz ± %2 (mains sync); 50 Hz / 60 Hz ± 0,5 Hz (free operation)

Power Factor 0,9

Crest Factor 3:1

Output Voltage Harmonics THDv < %3 ( linear load ) <%5 ( non-linear load )

Output Waveform True Sine Wave

Overload Capacity 10 min at %110 load; 1 min at %130 load; bypass at load >%130.

STATIC BYPASSInput Voltage 310-500VAC

Frequency 50 Hz ± %10

Short Circuit Protection Electronical protection, Fuse

BATTERYVoltage / Quantity Adjustable 18-20 ( Standart 20 pcs 12 VDC )

Type Maintenance free dry batteries

Battery Protection Deep discharge protectionGENERALTechnology On-Line double conversion

Control DSP controlled IGBT rectifier and inverter

Efficiency %92

Parallel / Redundant Operation Optional

Protection Overload, overheating, input/output short circuit

COMMUNICATIONDisplay Graphical LCD panel, Mimic diagram and control panel

Warnings / LED Mains, Battery, Inverter, Load, Error indicators

Advanced Communications RS232, Dry contacts( Optional ), Modem ( Optional ), Modbus ( Optional ), SNMP ( Optional )

ENVIRONMENT

Storage Temperature -20 ˚C ~ 60 ˚C

Relative Humidity %0 - %95 ( non-condensing )

Altitude ≤ 2000 m

Acoustic Noise ≤ 60 dB


Operating Temperature -10 ˚C ~ 50 ˚C


220/380 VAC / 230/400 VAC / 240/415 VAC ( 3 Phase + Neutral )

20




Remote monitor and control with SNMPProgrammable dry contactsGPRS modem / MOD BUS optionsEasy scaling with parallelling optionsIsolation transformersCustom input / output options


Advanced microprocessor controlTrue online double conversion DSP controlled IGBT rectifier and inverterActive Power Factor Correctoin (PFC) ≥ 0.99Low input THDi <%3 for perfect generator compatibilityLow output THDv <%2-5 for perfect energyPerfect compatibility with loads of different power factorsAccept dual mains inputs Wide input voltage range (380 ± 25% VAC)High efficiency up to %94Reliable parallel/redundant operation with load syncronizationIntellectual fan controlEMI / RFI filtersShort circuit, overload, high/low voltage protectionStart from battery (Cold Start)Selectable backup timeBattery deep discharge protectionTemperature controlled chargeStandart static and manual By-PassAdvanced error/fault identificationAdvanced PC connectivity with RS232 / USB

FABRICS HOTELS SERVER ROOMS

SHOPPINGCENTERS

MILITARYSYSTEMS


HOSPITALS

EMERGENCYSYSTEMS

NETPRO-33H Series40 kVA 3 Phase / 3 Phase


MADE IN




GENERAL FEATURES

OPTIONAL FEATURES

STANDARTS

H


New Generation High FrequencyUninterruptible Power SupplyNETPRO-33H

TECHNICAL SPECIFICATIONSModel NETPRO-33HNominal Power ( kVA ) 40 kVA

INPUT

Nominal Voltage / Phase Count 220/380 VAC / 230/400 VAC / 240/415 VAC ( 3 Phase + Neutral )

Input Voltage Range 310-500 VAC


Frequency Tolerance ± %10

Input Power Factor > 0,99

Total Harmonic Distortion THDi < %5

OUTPUTNominal Voltage / Phase Count

Voltage Tolerance ± %1


Frequency Tolerance 50 Hz / 60 Hz ± %2 (mains sync); 50 Hz / 60 Hz ± 0,5 Hz (free operation)

Power Factor 0,9

Crest Factor 3:1

Output Voltage Harmonics THDv < %3 ( linear load ) <%5 ( non-linear load )

Output Waveform True Sine Wave

Overload Capacity 60 min at %110 load; 10 min at %125 load; 1 min at %150 load

STATIC BYPASSInput Voltage 310-500VAC

Frequency 50 Hz ± %10

Short Circuit Protection Electronical protection, Fuse

BATTERYVoltage / Quantity Adjustable 28-30-32 pcs

Type Maintenance free dry batteries

Battery Protection Deep discharge protectionGENERALTechnology On-Line double conversion

Control DSP controlled IGBT rectifier and inverter

Efficiency %94

Parallel / Redundant Operation Optional

Protection Overload, overheating, input/output short circuit

COMMUNICATIONDisplay Graphical LCD panel, Mimic diagram and control panel

Warnings / LED Mains, Battery, Inverter, Load, Error indicators

Advanced Communications RS232, Dry contacts( Optional ), Modem ( Optional ), Modbus ( Optional ), SNMP ( Optional )

ENVIRONMENT

Storage Temperature -20 ˚C ~ 60 ˚C

Relative Humidity %0 - %95 ( non-condensing )

Altitude ≤ 2000 m

Acoustic Noise ≤ 60 dB


Operating Temperature -10 ˚C ~ 50 ˚C


220/380 VAC / 230/400 VAC / 240/415 VAC ( 3 Phase + Neutral +PE )




Advanced Remote Monitoring and Management Options via SNMP4 Programmable Dry ContactsGPRS Modem / CAN BUS Communication OptionsEasy Scalability with ParallellingMicroprocessor and Sensor Controlled Smart Battery ManagementCustomizable Input/Output Options


Advanced Microprocessor ControlTrue Online Double ConversionIGBT Rectifier and InverterActive Input Power Factor Correction (≥ 0.99)Low Input THDi <%5 Perfect Generator CompatibilityLow Output THDv <%3-5 Perfect Energy for your LoadsExcellent Compability with Different Power Factor LoadsSelectable Input/Output Voltage and FrequencyWide Input Voltage Range High Efficiency Up To 93%Ultra High Efficiency with Smart Eco Mode (%98)Reliable Parallel / Redundant Operation via Load SynchronizationSmart Fan ControlEMI / RFI FilterStart on Battery Feature (Cold Start)Short Circuit, High/Low Voltage and Overload ProtectionsAdjustable Time for Battery OperationBattery Deep Discharge ProtectionStandard Static ve Maintenance By-PassTemperature Compensated Battery Charge, Selectable Charge Current240 x 320 Touch Screen Graphical LCD Display Advanced Fault Identification, 1000 pcs Alert/Event MemoryAdvanced Communication Options with RS232 / RS485


FACTORIES HOTELSSERVERROOMS

SHOPPINGCENTERS

MILITARYAPPLICATIONS


HOSPITALS

EMERGENCYSYSTEMS

NETPRO-33 Series10 ~ 600 kVA 3 Phase / 3 Phase


MADE IN




GENERAL FEATURES

OPTIONAL FEATURES

STANDARDS

H



New GenerationUninterruptible Power SupplyNETPRO-33



Model NETPRO-33Power ( kVA ) 10-600 kVA

INPUT

Nominal Voltage / No. of Phases 220/380 VAC / 230/400 VAC / 240/415 VAC ( 3 P + N )

Voltage Range


Frequency Range ± 10%


THDi < 5%

OUTPUTNominal Voltage / No. of Phases 380 VAC / 400 VAC / 415 VAC (3 P + N)

Voltage Tolerance ± 1%


Frequency Tolerance 50 Hz ± 0,1 / 60 Hz ± 0,1

Power Factor 0,8

Crest Factor 3:1

THDv < 3% ( Linear Load ) < 5% ( Non-Linear Load )

Waveform Pure Sine

Overload Operation 10 min. at 125% load / 1 min. at 150% load

STATIC BY-PASSVoltage 380 / 400 / 415 V ( 3 P + N )

Transfer Time 0 ms.


BATTERYVoltage / Quantity 60 Pcs / 12 Vdc


Charging CurrentTemperature Compensated Charge Selectable Microprocessor and Smart Sensor Controlled


Control

Up To 93%

Parallel/Redundant Operation Optional

Protection Overload, Over Temperature, Input/Output Short Circuit

COMMUNICATIONDisplay 240 x 320 Graphical LCD ( Touch Screen Display )Alert / Event Memory 1000 pcs.

Advanced Communication RS232, 6 Programmable Dry Contacts, GPRS ( Optional ), SNMP ( Optional )



Relative Humidity 0% – 95% ( Non-Condensing )

Altitute ≤ 2000 m

Noise ( from 1 meter distance )

Protection Class IP21 (Standard) - IP65 (Optional)≤ 60 dB

-10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

-%20 / +%15


GPRS Modem / CAN BUS Communication OptionsEasy Scalability with ParallellingMicroprocessor and Sensor Controlled Smart Battery ManagementCustomizable Input/Output OptionsOutput Isolation Transformer Option


Modular Design (Up to 10 modules)Output Power Factor is 1,0Advanced Microprocessor ControlTrue Online Double ConversionIGBT Rectifier and InverterLow Input THDi <%3 Perfect Generator CompatibilityLow Output THDv <%1-3Selectable Input/Output Voltage and FrequencyHigh Efficiency Up To 96%Reliable Parallel / Redundant Operation via Load SynchronizationSmart Fan ControlEMI / RFI FilterStart on Battery Feature (Cold Start)Short Circuit, High/Low Voltage and Overload ProtectionsAdjustable Time for Battery OperationBattery Deep Discharge ProtectionStandard Static ve Maintenance By-PassTemperature Compensated Battery Charge, Selectable Charge Current240 x 320 Touch Screen Graphical LCD Display RS232, RS485, SNMP communicationDry Contact and generator portEPO is available


FACTORIES HOTELSSERVERROOMS

SHOPPINGCENTERS

MILITARYAPPLICATIONS


HOSPITALS

EMERGENCYSYSTEMS

NETPRO-33M Series30 - 300 kW 3 Phase / 3 Phase

Modular Design UPS

MADE IN




GENERAL FEATURES

OPTIONAL FEATURES

STANDARDS

H



Modular DesignUninterruptible Power SupplyNETPRO-33M



Model NETPRO-33MPower 30-300 kW

INPUT

Nominal Voltage / No. of Phases 220/380 VAC / 230/400 VAC / 240/415 VAC ( 3 P + N )

Voltage Range


Frequency Range 40-70 Hz


THDi < 3%

OUTPUTNominal Voltage / No. of Phases 380 VAC / 400 VAC / 415 VAC (3 P + N)

Voltage Tolerance ± 1%


Frequency Tolerance 50 Hz ± 0,1 / 60 Hz ± 0,1

Power Factor 1,0Crest Factor 3:1

THDv THDV <1% (linear load), THDV<3% (non-linear load)

Waveform Pure Sine

Overload Operation 1 hour @ 110% load, 10 min @ 125% load, 1 min @ 150% load

STATIC BY-PASSVoltage 380 / 400 / 415 V ( 3 P + N )

Transfer Time 0 ms.


BATTERYVoltage / Quantity 12 Vdc Battery, 30-40 pcs can be selected


Charging CurrentTemperature Compensated Charge Selectable Microprocessor and Smart Sensor Controlled


Control

>96%

Modules / Frame Up to 10 modules (30 kW) / 300 kW Frame

Protection Overload, Over Temperature, Input/Output Short Circuit

COMMUNICATIONDisplay 240 x 320 Graphical LCD ( Touch Screen Display )EPO Yes

Advanced Communication RS232, RS485, dry contact, SNMP, generator port



Relative Humidity 0% – 95% ( Non-Condensing )

Altitute ≤ 2000 m

Noise ( from 1 meter distance )

Protection Class IP21 ≤ 55 dB

-10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

-%20 / +%15


Overload, High/Low Voltage, Over Temperature Protection2x16 LCD display, mimic diagram1000 pcs Alert/Event MemoryCustom Design and Production Based on Client’ s requirementIntelligent cooling system

Advanced TechnologyHigh Performance via RISC Microprocessor ControlWide Power Options for Mono Phase / Three Phase SystemsWide Input Voltage RangeTrue RMS Measurement, Feedback and ControlBest in Class with 200 V/s Regulation SpeedHigh Efficiency Up To 98%Independent Control Panel for Each PhaseSelectable Output Max/Min VoltageTemparature Controlled Smart Cooling Short Circuit Protection, Ease of Transfer of Load to Utility via Manual By-Pass Automatic Deactivate/Reactivate in Abnormal ConditionsIndependent/Together Operation of Phases High Performance Even on 100% Unbalanced LoadSilent OperationCompact/ Impact Resistant

SERVO-REG Series1 ~ 2500 kVA Microprocessor Controlled

Servo Voltage Stabilizer

TRANSPORTCOMPANIES

CINEMA &THEATERS

MILITARYFACILITIES

HOUSE ANDAPARTMENTS

INDUSTRIALFACILITIES

FUELSTATIONS


RADIO & TVSYSTEMS

GENERAL FEATURES

OPTIONAL FEATURES

STANDARDS

MADE IN




%100 Made in TURKEYEnvironment Friendly DesignSmall DimensionsEasy Installation/Maintenance and Service Low Installation and Operational Costs10 Years Spare Part Availability7/24 Technical Service and Customer Services

TS EN 60335-1



SERVO-REG MC Series Servo Regulators are microprocessor controlled advanced technology stabilizers and operation technology is based on Pulse Width Modulation. Microprocessor and Pulse width modulation provides enhanced control on the servo motor and this offers the best dynamic response to the input disturbances and increases the speed for the system. The design provides extended lifetime for the system and reduces total cost of ownership.

Each phase is controlled independently so that the load connected to the output is supplied continuously even if there exists unequal voltages in phases and unbalanced load at input and output. SERVO-REG Series are 100% made in TURKEY and all the components inside has international certificates and compatible with international standards, 1 year standart warranty and 10 years spare parts availability is what comes with SERVO-REG Series stabilizers

SUPERIOR FEATURES



Servo Voltage StabilizersMicroprocessor ControlledSERVO-REG

MODEL Microprocessor Controlled SERVO-REGPhase 1 Phase 3 PhasesPower 1 ~ 50 kVA 3 ~2500 kVAINPUT

Regulation Voltage Range

Operating Voltage Range

Frequency 45-65 Hz

OUTPUTNominal Voltage 220 VAC RMS 380 VAC RMS

Voltage Tolerance ± 0,5%

Frequency Range 45-65 Hz

Regulation Speed 200 V/s

THDv 0%

Overload Operation 10 min. at 125% load / 1 min. at 150% load / 25 sec. at 200% load

GENERALTechnology Microprocessor Controlled, Full Automatic Servo

Control RISC Microprocessor, H-Bridge MOSFET PWM Motor Drive Technics

Independent Phase Regulation Standard in 3 Phase Models

98%

Cooling Forced cooling / Temperature Controlled Cooling System (optional)

Protection Output Short Circuit, Overload, Output High / Low Voltage, Over Temperature, Motor Fault, Ground-Neutral ( Optional ) Protection

Mechanic By-Pass Manual Mains/Regulator Breaker

CONTROL PANELDisplay Special LCD for each phase

Alert / Event Memory Mimic Diagram, Fault Warning LEDs / Real Time 1024 pcs Event/Alert Memory

Monitorable Datas True RMS Input/Output Voltage, Load Percentage, Frequency Measurement

COMMUNICATİONDry Contacts (Optional) Regulator Normal Operation ( NO,C,NC )

Remote Monitoring (Optional) Remote monitor over Netwok/LAN ( Optional )



Noise <50 dB

Altitute ≤ 2000 m


STANDARDS

International Standards

-10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

130 - 270 VAC 225 - 465 VAC160 - 250 VAC / 275 - 440 VAC /

110 - 285 VAC140 - 265 VAC / 190 - 490 VAC240 - 460 VAC /

ISO 9001, CE, EN 60335-1


Custom Design and Production for Client’ s NeedRemote Monitoring and Management Options

Advanced TechnologyHigh Reliability with Full Digital Microprocessor ControlWide Power Options in Mono Phase and Three Phase SystemsWide Input Voltage RangeTrue RMS Measurement and Feedback , ControlBest in Class with 500 V/s Regulation SpeedRegulation in 1 period with 20 ms response timeEMI / RFI FilterOverload, Over Voltage, Low Voltage ProtectionsLightning ProtectionShort Circuit ProtectionManuel By-PassAutomatic Operation in Abnormal ConditionsIndependent Phase OperationHigh Performance Even on 100% Unbalanced LoadEasy Monitoring of All Operation Data with LCD Display Silent Operation, High Efficiency and SensibilityModular, Ergonomic Design

FACTORIESSHOPPINGCENTERS AIRPORTS

BANKS

HOSPITALS

CNCMACHINES

HOTELS MARINEEQUIPMENT

NETPRO-SVR Series3 ~ 3000 kVA

Static Voltage Stabilizer

GENERAL FEATURES

OPTIONAL FEATURES

STANDARDS

100% Made in TURKEYEnvironmental DesignSmall Dimensions, Silent Operation Easy Installation/Maintenance and ServiceLow Installation and Operational Costs10 Years Spare Part Warranty7/24 Technical Service and Customer Services

MADE IN




H

TS EN 60335-1

Microprocessor controlled NETPRO-SVR regulates the input disturbances in miliseconds by means of its advanced design.It doesn’t include any moving parts so that no maintenance or replacement needed.High performance microprocessor control and state of the art of the electronics feedback algorithm delivers the best protection when high/low voltage, over current, over temperature and short circuit occurs.

Standard EMI&RFI filters provides best protection againist electrical disturbances for your loadGives the best response for the loads with high inrush currents via the semiconductor components which are resistant to high currents about 100% of the nominal current in 20 ms.NETPRO-SVR transfers the power in zeros so that it delivers no harmonics to the load by means of static components with Step-Up / Step-Down.

SUPERIOR FEATURES


Static Voltage StabilizersNETPRO-SVR




Model NETPRO - SVRPhase 1 Phase 3 Phases

Power 3 kVA ~ 45 kVA 10 kVA ~ 3000 kVA

INPUTOperating Voltage Range 130 - 270 VAC 210 - 475 VAC

Regulation Voltage Range 160 - 250 VAC 280 - 440 VAC

Frequency 50 Hz ± 10%

Input Protection Over Current Thermal Fuse, Surge Protection

OUTPUTVoltage 220 VAC RMS ± 3% 380 VAC RMS ± 3%

Overload Operation 10 min. at 125% load / 1 min. at 150% load / 25 sec. at 200% load

Regulation Speed 500 V / s

Response Time ~ 20 ms. ( 165 VAC - 255 VAC )

Output Protection Short Circuit, Overload, Turning OFF of output over the Output Set Voltage

GENERAL

Technology RISC Microprocessor Controlled, Full Automatic, Electronics Design with Static Semiconductors,No Moving Parts Inside

> 98% ( at Full Load )

Mechanic By-Pass Utility – Regulator Selector PAKO Breaker

CONTROL PANELDisplay

Warning Messages Mains Low / Mains High, Output Low / Output High, Load >100% and Over Temperature

Monitorable Datas Output Voltage, Input Voltage, Load Percentage

Output High Voltage Limit Selectable between 230 VAC - 250 VAC ( via LCD )

Output Low Voltage Limit Selectable between 180 VAC - 210 VAC ( via LCD )

COMMUNICATIONRemote Monitoring Monitoring of Operation over Network/LAN ( Optional )

ENVIRONMENTOperating / Storage Temperature Range -10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

Relative Humidity

Altitute ≤ 3000 m

Noise < 50 dB ( from 1 meter distance )

Protection Level IP21 (Standard) - IP65 (Optional)

STANDARDS / CERTIFICATES TS, EN 60335-1

0% ~ 95% ( Non-Condensing )


Smart Communication with RS232 ve SNMP Warning LEDs and Programmable Dry ContactsCustom Design and Production for Client’ s Need

CE, ISO 9001:2008

Full AutomaticMicroprocessor ControlledMaximum Efficiency via IGBT Design Pure Sinewave Output On-Line TechnologyGalvanic Isolation and Switch Mode Design Wide DC Input Voltage Range (12V ~ 810V)Low Output THDv <%32% Output Voltage Tolerance (Inverter Operation)High Efficiency Up To 88%Soft Start Feature for Critical Applications High Performance on Linear/Non-Linear LoadsHigh Output Power Factor for The Loads with Different Power FactorsEMI / RFI Filters at Input/Output for Critical ApplicationsHigh/Low Voltage, Lightning, Surge ProtectionOperation with/without batteryShort Circuit, Overload, Battery Deep Discharge ProtectionEasy Monitoring of All Operation Data with LCD Display Selectable Electrical SettingsModular Structure

SEAVEHICLES

RAILVEHICLES

ROADVEHICLES

ELECTRICALUNITS

AIRVEHICLES

SOLARPANELS

LIGHTINGSYSTEMS

WINDTRIBUNES

SERVO-INV Series250 VA - 400 kVA

Static Inverter

MADE IN




GENERAL FEATURES

OPTIONAL FEATURES

STANDARDS

100% Made in TURKEYEnvironment Friendly DesignSmallest Dimensions, Silent OperationEasy Installation and ServiceLow Installation and Operational Costs10 Years Spare Part Availability7/24 Technical Service and Customer Services



SERVO-INV Series Inverters converts the DC voltage, between 12 ~ 810 VDC, from battery set or rectifier connected, into 220 or 380 VAC and supplies continuous power between 250 VA ~ 400 kVA.

SERVO-INV Series inverters are based on microprocessor control and DSP technology and its ergonomic design makes it the indispensible item for various fields of applications.

Optional isolation transformer at output provides safer and more reliable operation.

SUPERIOR FEATURES


Static InvertersSERVO-INV

TECHNICAL SPECIFICATIONSModel SERVO INVPower 250 VA ~ 400 kVA

INPUTNominal Voltage 12 ~ 810 VDC

DC Input Voltage Range Varying, Selectable

Current on No Load

OUTPUTNominal Voltage 115 / 200 VAC - 220 / 380 VAC - 254 / 440 VAC

Voltage Tolerance ± 2% ( Inverter Operation )

Frequency 50 Hz / 60 Hz ± 0,5

Power Factor Up To 1 for Different Power Factor Loads

Crest Factor 3:1

Waveform Pure Sine

Continuous Power > 80% of The Rated Power

Overload 10 min. at 125% load / 1 min. at 150% load / 25 sec. at 200% load

GENERAL FEATURESTechnology Static, Microprocessor Controlled

Control High Frequency PWM Technics, IGBT technology

> %85

Protection Input : Fast FusesOutput : High Voltage, Regenerative Current, Short Circuit, Fast Fuses for Load Protection

Overload Operation 10 ms at 200% load ( Selectable )

RFI Level EN62040

CONTROL PANELDisplay 2x16 Character LCD Display( Different Language Options ) / 240x320 Graphical LCD panel (optional)

Alert / Event LED Warnings / Alert / Event Memory ( Optional )

COMMUNICATION

Remote Monitoring Advanced Communication over PC via RS232 ( Optional )Remote Monitoring via SNMP over TCP/IP ( Optional )



Altitute ≤ 2000 m

Protection Class IP21

-10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

Varying, based on power

SEAVEHICLES

RAILVEHICLES

ROADVEHICLES

ELECTRICALUNITS

AIRVEHICLES

SOLARPANELS

LIGHTINGSYSTEMS

WINDTRIBUNES

SERVO-INV SOLAR1-5 kVA

On Grid - Off Grid Solar Inverter

MADE IN




STANDARDSCE, ISO 9001:2008


GENERAL FEATURES

Pure sine wave output On grid and off grid hybrid applicationSelectable power supply; battery, grid, PV Selectable charging current and voltageParallel operation up to 6 unitsHigh frequency full bridge designBuilt-in MPPT solar charge controllerSelectable input voltage range for household appliances and personal useSelectable charging current based on applicationsCompatible to mains voltage or generator powerAuto restart while AC is recoveringOverload and short circuit protectionSmart battery charger design for optimized battery performanceCold start function

FULL PROTECTION

Protection for low battery voltage, over load, output short circuit and over-temperature, restrain surge interference, eliminate noiseprotection for thunder striking, provide the reliable power to the household appliances

APPLICATIONS

Supply the reliable long back up time power for the household appliances office appliances and solar power systems etc.




On Grid - Off GridSolar InverterSERVO-INV SOLAR

TECHNICAL SPECIFICATIONSModel SERVO-INV SOLARPower 3 kVA

Max. PV Array Open Circuit Voltage 145 Vdc

MPPT Tracker Number

ON GRID MODE

Output Voltage Range 185 - 270 Vac

Nominal Output Current

Power Factor 0,9 or 1,0 (with transformer based models)Efficiency >90%

Input Voltage Range 170 - 280 Vac

Frequency 50 Hz / 60 Hz (Auto Select)

Maximum AC Input Current

ON BATTERY MODE

Output Wave Form Pure Sine Wave

Efficiency >93%

Nominal DC Voltage

Maximum Solar Charge Current

Maximum AC Charge Current 60 A

INTERFACEParallel Function Above 3 kVA

Operating Temperature Relative Humidity 0% ~ 95% ( Non-Condensing )

Altitude ≤ 2000 m

1 1 2

Nominal Output Voltage

Maximum Charge Current 140 A 180 A

Max. PV Array Power

-10 ˚C ~ 60 ˚C

220 / 230 / 240 Vac

1 kVA 2 kVA 4 kVA 5 kVA

1 kW 2 kW 3 kW 4 kW 5 kW

1 1

4,3 A 8,7 A 13 A 17,4 A 21,7 A

30 A 40 A

Nominal Output Voltage 220 / 230 / 240 Vac

Battery & Charger

12 Vdc 24 Vdc 48 Vdc

80 A 80 A 80 A 80 A 120 A

Communication USB or RS232 / Dry-Contact

ENVIRONMENT

Audible Error WarningsAuto Shut Down After End of The ProcessRemote Monitoring/Management for Battery Temperature/StatusExternal Analog Start Input DC Ground Leakage Protection Unit Dropper Diode Unit for Constant Load Voltage Customized Design and Production for Client’ s Need.

High Perfomance via Advanced Microprocessor ControlBattery Charger and DC Power Supply OptionsHigh Frequency PWM TechnologyIGBT/Tyristor Module TechnologyTyristor and Switch Mode ApplicationsSelectable Input Voltage OptionsDifferent Input Voltage Options for Monophase/Triphase UtilitiesLow Ripple (%2 - %5) at OutputEnergy Saving SystemConstant Voltage and Constant Current OptionsAdjustable Quick and Normal Charging Voltage and CurrentLonger Battery Lifetime with Lower DC RippleSelectable Battery Type (with Water, Dry Type, Gel, NiCd)Automatic StartInput EMI/RFI FilterShort Circuit, High Current/Voltage, Overload, Over Temperature ProtectionsDC Low Voltage ProtectionEast Access to Operation Status Data via LCD PanelWarning Leds and Dry Contact OutputHigh Efficiency, Extended Lifetime

SERVO-RED Series12V ~ 400V / 10A ~ 1000A

DC Power Supply - Battery Charger

GENERAL FEATURES

OPTIONAL FEATURES

STANDARDS

100% Made in TurkeyEsthetical Appearance, Modular DesignSilent Operation, Environment Friendly Design Easy Installation/Maintenance/ServiceLow Installation and Operation Cost10 Years Spare Part Availability7/24 Technical Service and Customer Services

MADE IN




SEAVEHICLES

AIRVEHICLES

TELECOMSYSTEMS

SOLARPANELS

RAILVEHICLES

WINDTRIBUNES

LIGHTINGSYSTEMS

ALARMSYSTEMS


TS EN 62040-1 TS EN 61204 md.4 (LVD) TS EN62040-3 (EMC)





SERVO-RED DC Power SupplyBattery Charger

Model SERVO-REDINPUTNominal Input Voltage Monophase 220/230/240 VAC - Triphase 380/400/415 VAC

Input Voltage Range ± 20%

Nominal Input Frequency 50 / 60 Hz

Frequency Range ± 10%

Power Factor > 0,8

Input Protection Circuit Breakers

OUTPUTNominal Output Voltage 12 / 24 / 36 / 48 / 72 / 80 / 96 / 110 / 220 / 240 / 380 / 400 VDC and Custom Design

Quick Charge Voltage Up to 120% of nominal output voltage

Max. Output Current Up to 110% of nominal output current

Ripple at Output 3% (On battery) - 5% (Without battery)

Output Protection W Automat Fuse, Electronics Over Current Protection

GENERAL FEATURESOperating System Transformer Based, SMPS (Optional for Small Powers)

Operating Technology High frequency PWM technic, IGBT technology / Switch mode technology

Control Microprocessor Controlled

> 90%

Protection Input : Input FuseOutput : Over voltage, Short circuit

CONTROL PANELDisplay and Buttons 4x20 Character LCD Panel ( Different Languages as an Option ), Menu Selection and Parameter Setting Buttons

Settable Values Normal-Quick Charging Coltage, Output Current

Audible Alarms Available

Dry Contact Information Optional

Warning / Event Led warnings , Warning/Event Memory ( Optional )

COMMUNICATION

Remote Monitoring PC communication over RS232 ( Optional )Remote Monitoring and Management via SNMP over TCP/IP ( Optional )

Output Isolation High voltage isolation with output isolation transformer

Over Current Protection 10 ms. 200%, fuse

RFI Level

ENVIRONMENTALCooling Forced Air Cooling

Operating / Storage Temperature


Operation Altitute ≤ 2000 m

Audible Noise < 50 dB

Colour RAL9005, RAL7015, RAL7032 & Other Available Colours


-10 ˚C ~ 50 ˚C / -20 ˚C ~ 60 ˚C

TS, EN 62040-3

1 ~ 20 kva 1 phase / 1 phase uninterruptible power supply · · 2017-11-10dsp microprocessor...

Documents