1 about this model this model employs 3 inverted ‘bipods’ for baffle. bipods in quotes because...
TRANSCRIPT
![Page 1: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/1.jpg)
1
About this modelAbout this model
• This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed.
• No skins are included in the FEA, but are certainly necessary for contamination and light control...skins would carry loads in FEA, and I want to show the structure is adequate w/o them.
• In FEA, instrument deck/lower closeout is modeled as aluminum/honeycomb sandwich with 1mm skins and 25mm core, not populated with instrument electronics in FEA.
— Not sure how exactly this would integrate with the 12-sided angle aluminum structure that forms the interface between baffle and s/c.
— Boxes carried on deck should be pushed as far toward perimeter as possible.
• A similar model with 5 inverted ‘bipods’ was analyzed.— Different material thicknesses from this model.— Basically copy the struts from this model, clocked 60 degrees, omit a pair by
instrument.— 5 bipod model is 16kg lighter than 3 bipod model.
• 5 bipod natural frequencies: 18.4, 21.0 Hz.• 3 bipod natural frequencies: 18.7, 19.2 Hz.• At Delta IV launch accelerations, mat’l safety factors are 10 in aluminum and 5
in Ti thermal standoffs.
![Page 2: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/2.jpg)
2
Model specifics (see slide 7)Model specifics (see slide 7)
• Inst deck/baffle bottom closeout: 1mm Al skins on 25mm thick Al honeycomb core.
• S/C adapter/handling ring: Aluminum angle, 150mm x 75mm, longer leg of angle is 3mm thick, shorter leg is 5mm thick.
• Thermal standoffs, 50mm dia, 1.5mm thick Ti tubes.
• Baffle support legs: closed rectangular sections, ~110mm x ~50mm, 3mm thick walls.
• Stiffening gussets in angle near thml standoffs: 5mm thick Aluminum.
• Flange at base of upper baffle: 5mm thick.
• Bottom 200mm of upper baffle tube: 3mm thick.
![Page 3: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/3.jpg)
3
Observatory, dummy OTAObservatory, dummy OTA
![Page 4: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/4.jpg)
4
Lower baffle area, no skins in modelLower baffle area, no skins in model
![Page 5: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/5.jpg)
5
Array turned offArray turned off
![Page 6: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/6.jpg)
6
![Page 7: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/7.jpg)
7
inst deck/bottom closeout
1.5mm thick Ti thermal break3mm thick, 150mm tall part of angle
5mm thick, 75mm wide part of angle
5mm thick gusset 110mm x 50mm x 3mm legs
5mm thick upper baffle flange
3mm thick bottom 200mm of upper baffle
1mm thick nominal
upper baffle
![Page 8: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/8.jpg)
8
Inst. deck/lower closeout turned offInst. deck/lower closeout turned off
![Page 9: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/9.jpg)
9
OTA turned offOTA turned off
![Page 10: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/10.jpg)
10
Angle web turned offAngle web turned off
![Page 11: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/11.jpg)
11
![Page 12: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/12.jpg)
12
Just baffle support legsJust baffle support legs
![Page 13: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/13.jpg)
13
‘‘detail’ viewdetail’ view
![Page 14: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/14.jpg)
14
inst deck turned offinst deck turned off
![Page 15: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/15.jpg)
15
![Page 16: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/16.jpg)
16
![Page 17: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/17.jpg)
17
![Page 18: 1 About this model This model employs 3 inverted ‘bipods’ for baffle. Bipods in quotes because legs are not pinned at ends, but are fixed-fixed. No skins](https://reader036.vdocument.in/reader036/viewer/2022062518/5697bf771a28abf838c81924/html5/thumbnails/18.jpg)
18