1 electric power quality, harmonic reduction and energy saving using modulated power filters and...
Post on 19-Dec-2015
217 views
TRANSCRIPT
![Page 1: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/1.jpg)
1
ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER
FILTERS AND CAPACITOR COMPENSATORS
POWER QUALITY-PQ
Professor Dr. Adel M. Sharaf. P.Eng.UNB-ECE Dept
Canada
UNIVERSITY OF NEW BRUNSWICK
![Page 2: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/2.jpg)
2
What is Power quality ?
Definition : “Power quality problem is any power problem manifested in voltage, current, or frequency deviation that results in failure or misoperation of customer equipment”.
Power quality can be simply defined as shown in the interaction diagram:
Electrical GridUtility
Nonlinear LoadsIndustrial/Commercial/Residential
Consumers
VoltageQuality
CurrentQuality
PowerQuality
•Voltage Sags
•Voltage Swells
•Blackouts/Brownouts
•Transient
•Inrush
•Overcurrent
•Flickering
•Harmonics
•Waveform Distortion
•Arc Type
•Temporal
•Converter Type
•Saturation Type
•NLL-Analog/Digital Switching
![Page 3: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/3.jpg)
3
Why are we concerned about PQ
The Main reasons behind the growing concern about PQ are:
North American industries lose Tens-of-Billions of Dollars every year in downtime due to power quality problems. (Electrical Business Magazine)
Load nonlinearities in rising and is expected to reach 50 to 70% in the year 2005 (Electric Power Research Institute) [Computers, UPS, fax machines, printers, fluorescent lighting, ASD, industrial rectifiers, DC drives, arc welders, etc).
The characteristics of the electric loads have changed. Harmonics are continuous problem not transient or intermittent.
![Page 4: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/4.jpg)
4
Power Quality Issue and Problems
Power Quality issues can be roughly broken into a number of sub-categories: Harmonics (sub, super and interharmonics); Voltage swells, sags, fluctuations, flicker, and transients Voltage magnitude and frequency deviation, voltage imbalance (3ph sys.) Hot grounding loops and ground potential rise (GPR)–Safety & Fire
Hazards Monitoring and measurement.
![Page 5: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/5.jpg)
5
Power Quality PQ Issue
Harmonics and NLL issues: The harmonic issue (waveform distortion) is a top priority
to for all equipment manufacturer, users and Electric Utilities (New IEC, ANSI, IEEE Standards).
1
2
2
I
I
THD nn
i
DPFTHD
PFi21
1
![Page 6: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/6.jpg)
6
SYSTEM MODELS
Single Line Diagram of Radial Utilization System
Converter Type Arc Type Dynamic Cyclical Ripple Inrush Temporal Motorized on/off SMPS ASD Saturation Type
NonlinearLoad
NLL
R s L sV s V L
YF(s)
on/off orPWM
Load Bus
ElectricUtility
Transformer
System+Transformer+FeederElectric
Equivalent(Plant) Load
Switched/ModulatedPower Filter or Static
Capacitor Compensator
i s
ControlSignals
SmartController
*V s
Ps
SMPFDifferent
Topologies
Nonlinear Load (NLL)
* Smart-controllers arebased on specified control
objectives
eight designs(Dr. A.M. Sharaf) YF (TAF, C-Type, HPDF, Special Topology)
![Page 7: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/7.jpg)
7
Nonlinear Load Models
R s L sV s V Lis
D 1 D 2
E 1
R 1R 2
E 2Arc NonlinearLoad/ Cyclical
SymmetricalAsymmetrical
E1 different from E2R1 different from R2
Vs
Ls RsiS
iL
NonlinearLoad
R L
L L
Arc Type
Temporal time-dependent (Cyclical load)
Volt-Ampere (VL – IL)
Cyclical Load
![Page 8: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/8.jpg)
8
Nonlinear Load ModelsCyclical nonlinear Load
Vs
Ls RsiS iL istator
irotor
imagnetizing
L m
L r
L sR s
rR
)( statorZ s
)( gmagnetizin
Z m
)(rotorZ r
V L
V L1 V L2
irist
im
Alpha: Slip Measure of Loading
Modulated Rectifier Circuit
R dcV d
IdL f
R s L sV s is
R ac
X ac
R ac
L ac
Modulated Loadt
Cyclical Motorized
Converter-Rectifier Modulated
Industrial Motorized
Load
Volt-Ampere (VL – IL)
Modulated Fanning Effect
![Page 9: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/9.jpg)
9
Nonlinear Load Models
R s L sV s is
SMPS-Computer Network
idcR 1
L 1
V cC 1
Diode-Bridge
R Lamp Magnetic Saturation-Transformer
type Nonlinear Load
Fluorescent Lamp
L
Vs
Ls RsiS iL
V L
V feeder
Ballast
Starter
Switch Mode Power Supply (SMPS)
Magnetic Saturation type
Volt-Ampere (VL – IL)
Limiter Type
FL-Starter Ballast
Nonlinear
![Page 10: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/10.jpg)
10
Nonlinear Load Models
Adjustable Speed Drive
C
Nonlinear Load
R sL s
V sis
PCC
M
Rectifier InverterAC Motor
AC Motor and Inverter have been replaced by an equivalent resistor
PCC:point of common coupling
V LL
P in
Adjustable Speed Drive (ASD)
Volt-Ampere (VL – IL)
Dual Loop Nonlinear
![Page 11: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/11.jpg)
11
Switched Modulated Power Filters and Capacitor Compensators
L
R
C
V F
TAF
S
L1
R1
C1
V F
S1
ATAF
V > 0
L2
R2
C2
S2
V < 0
SPF/SCC
C f
iF
S1
S2
C f
L f
R f
A N
(V n)
S2=S1
GTO or (IGBTwith bridge)
Parameters: (C f, L f, R f)
R
C2
L
C1
V F
C-Type
S
Tuned-Arm Filter (TAF) Asymmetrical Tuned-
Arm Filter (ATAF)
TAF + Static Capacitor Compensator C-Type
Filter
MPF/SPF(Family of Filters – Compensators) Developed by Dr. A. M. Sharaf
on/off orPWM
iF2
V F
L1
R1
C1
L2
R2
C2
iF1
Dual-Tuned-Arm Filter
![Page 12: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/12.jpg)
12
Switched Modulated Power Filters and capacitor Compensators
C S1
N
LL
M1
M2
diode Bridge
SPWMon/off
C S2
C PSwitched
Fixed
N
M1
To Load
L CT
CS
S1
CL
S2
S2=S1
M2
Motorized Inrush Loads
• Water Pumps
•A/C
•Refrigeration
•Blower / Fans
Economic Tuned-Arm Power Filter and Capacitor Compensator Scheme (used in S-phase 2 wire loads)
Switched Capacitor Compensator Scheme (used for on/off Motorized loads)
![Page 13: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/13.jpg)
13
Novel Dynamic Tracking Controllers (Family of Smart Controllers Developed by Dr. A. M. Sharaf)
The Dynamic Control Strategies are:1. Dynamic minimum current ripple tracking
2. Dynamic minimum current level
3. Dynamic minimum power tracking
4. Dynamic minimum effective power ripple tracking
5. Dynamic minimum RMS source current tracking
6. Dynamic maximum power factor
7. Minimum Harmonic ripple content
8. Minimum reference harmonic ripple content
Electric Power/Energy Savings
Improve Supply PQ by reducing Harmonics and improve power factor and enhance waveforms as close as possible to sine wave
![Page 14: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/14.jpg)
14
Novel Dynamic Controllers
Delay
I(k)
I(k-1)
iSK p + K i /s PWM Filter
iFiRef =0 e
PI
Vc
RMSDetector
iL
Dynamic Minimum-RMS Current tracking
Notch Filter
0hrefi
Abs
Reject 60Hz
hi
iSK p + K i /s PWM Filter
iFe
PI
Vc
iL
Minimum Harmonic Reference Content
![Page 15: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/15.jpg)
15
Switching Devices (on/off or PWM)
(a)
(b)
on/offTo GTO
SSR/TriacController-e 0
e0
e 0:Deadband/Bias
on/off
Bias
error
PI Controller
K p + K i /sV c
ton
0
10V
V c=(0-10V)
errorgenerated bythe Controller
V c ton
t on
PWM
0<t on <T s/wT s/w =1/f s/w
0
T s/w switch S1
S2NOT
S2=S1
To GTOSSR/TriacController
The solid-state switches (S1, S2) are usually (GTO, IGBT/bridge, MOSFET/bridge, SSR, TRIAC) turns “ON” when a pulse g(t) is applied to its control gate terminal by the activation switching circuit. Removing the pulse will turn the solid-state switch “OFF” TS/W=1/fS = (ton + toff) 0<ton<TS/W
1
0
tston
T S/W
g(t)
g(t)=1 switch closedg(t)=0 switch open
toff
![Page 16: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/16.jpg)
16
Switching Devices – PWM Circuits
(1)
(2)
PWM Circuit (Developed by Dr. C. Diduch) for use with Matlab/Simulink
PWM Circuit (Matlab/Simulink/Stateflow-Grundlagen)
![Page 17: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/17.jpg)
17
Concept of Modulated Power Filters (MPF)
L
R
C
V F
TAF
on/off or PWM
V F
IF
GTO, MOSFET,Triac, IGBT
Tune Arm Filter layout
v
t
t
u(t)
-u(t-t o)
u(t)-u(t-t o)
to
to
The Linear Combination of two Unit Step Functions to
describe a Pulse of Amplitude 1 and duration t0.
![Page 18: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/18.jpg)
18
Modulated Tuned Arm Filter (Sym. & Asym.)
Single Line Diagram of System and Modulated / PWM Tuned-Arm Filter
Load is either:
•Symmetrical Arc Type
•SMPS
•Adjustable Speed Drives
•Asymmetrical Arc-type
L
R
C
V F
SMPS-ComputerNetwork
V g
V L
is
iL-totaliF
V s
feeder
utility
TransformerNLL 1
NLL 2
NLL 3
CR 1
L 1
Sample SMPS Load
~
R1= constant or variablyswitched
Dynamic Controller:
-Min. effec. Power
-RMS current tracking
-Min. Harmonic Content
![Page 19: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/19.jpg)
19
Modulated Tuned Arm Filter with (SMPS) Load
Without (THD=74%) With (THD=9%)
![Page 20: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/20.jpg)
20
Modulated Asymmetrical Tuned-Arm Filter
V sV L iL
R T LTfeederR f L f
R s=R T+R f
L s=L T+L f
TransformerUtility
)12( SS dual-
complementaryswitching
(ATAF)
V L
R 1
D A D B
E 1
iL
iL2iL1
)1(12 RR
)1(12 EE
NonlinearAsymmetrical
Load
V F
C2C1
L1
R2
D1 D2
ton1ton2
R1
L2
S1 S2
G
iF
Nonlinear Temporal Load Parameters:
R1=R01+R11sin(wr1*t); E1=E01+E11sin(wr2*t);
R2=R02+R22sin(wr1*t); E2=E02+E22sin(wr2*t);
R2= R1(1+) R01=8 R02=12 R11=2 R22=6 wr1=15
E2= -E1(1+) E01= 46 E02=70 E11=12 E22=35 wr2=5
Dynamic Controller: Dual loop of RMS current tracking and Min. Harmonic Content
Without (THD=42%)
Without (THD=18%)
With (THD=14%)
With (THD=7%)
![Page 21: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/21.jpg)
A Low-cost Voltage Stabilization and Power Quality Enhancement Scheme for a Small Renewable Wind Energy Scheme
Professor Dr. Adel M. Sharaf. P.Eng.UNB-ECE Dept
Canada
![Page 22: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/22.jpg)
22
OUTLINE
Introduction System Description Novel PWM Switching Control Scheme Modulated Power Filter Compensator Simulation Results Conclusion
![Page 23: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/23.jpg)
23
Introduction
Motivation of renewable wind energy Fossil fuel shortage and its escalating
prices Reducing environmental pollution caused
by conventional methods for electricity generation
![Page 24: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/24.jpg)
24
Introduction
Challenges of the reliability of wind power system Load excursion Wind velocity variation Conventional passive capacitor
compensation devices become ineffective
![Page 25: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/25.jpg)
25
System Description
Self-excited induction generator (SEIG) Transformers and short feeder Hybrid loads: linear load and non-linear load The modulated power filter compensator (MPFC)
![Page 26: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/26.jpg)
26
Novel PWM Switching Control Scheme
![Page 27: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/27.jpg)
27
Novel PWM Switching Control Scheme
Multi-loop dynamic error driven The voltage stabilization loop The load bus dynamic current tracking loop The dynamic load power tracking loop
Using proportional, integral plus derivative (PID) control scheme
Simple structure and fast response
![Page 28: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/28.jpg)
28
Novel PWM Switching Control Scheme
Objective: To stabilize the voltage under random load
and wind speed excursion Maximize power/energy utilization
The control gains (Kp, Ki) are selected using a guided trial and error method to minimize the objective function, which is the sum of all three basic loops.
![Page 29: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/29.jpg)
29
The Functional Model of MPFC
The capacitor bank and the RL arm are connected by a 6-pulse diode to block the reverse flow of current.
Capacitor size normally selected as 40%-60% of the non-linear load KVAR capacitor.
![Page 30: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/30.jpg)
30
Proposed MPFC Scheme and Its Functional Model
![Page 31: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/31.jpg)
31
Simulation Results
Digital simulation environment: MATLAB 7.0.1/SIMULINK
Sequence of load excursion: From 0s to 0.2s: Both Linear Load 200 kVA
(50%) and nonlinear Load 200 kVA (50%) connected
From 0.2s to 0.4s: Linear Load 200 kVA(50%) connected only
From 0.4s to 0.6s: No load is connected
![Page 32: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/32.jpg)
32
System Dynamic Response Without MPFC
![Page 33: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/33.jpg)
33
System Dynamic Response With MPFC
![Page 34: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/34.jpg)
34
Error plane of the dynamic error driven controller
-10
1
-20
2-1
0
1
Ei*r
The Error Diagram
Ev*rE
p*r
![Page 35: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/35.jpg)
35
Conclusions
The digital simulation results validated that the proposed low cost MPFC scheme is effective in voltage stabilization for both linear and nonlinear electrical load excursions.
The proposed MPFC scheme will be easily
integrated in renewable wind energy standalone units in the range from 600kW to 1600kW.
![Page 36: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/36.jpg)
36
Reference
[1] A.M.Sharaf and Liang Zhao, ‘A Novel Voltage Stabilization Scheme for Standalone Wind Energy Using a Facts Dual Switching Universal Power Stabilization Scheme’, 2005
[2] M.S. El-Moursi and Adel M. Sharaf, 'Novel STATCOM controller for voltage stabilization of wind energy scheme', Int. J. Global Energy Issues, 2006.
[3] A. M. Sharaf and Guosheng Wang, ‘Wind Energy System Voltage and Energy Enhancement Using Low Cost Dynamic Capacitor Compensation Scheme’, 2004.
[4] A.M. Sharaf and Liang Yang, 'A Novel Efficient Stand-Alone Photovoltaic DC Village Electricity Scheme’, 2005
![Page 37: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/37.jpg)
37
Reference
[5] Pradeep K. Nadam, Paresk C. Sen, 'Industrial Application of Sliding Mode Control', IEEE/IAS International Conference On Industrial Automation and Control, Proceedings, pp. 275-280, 1995
[6] Paresk C. Sen, 'Electrical Motor and Control-Past, Present and Future', IEEE Transactions on Industrial Electronics, Vol.37, No.6, pp.562-575, December 1990
[7] Edward Y.Y. Ho, Paresk C. Sen, 'Control Dynamics of Speed Drive System Using Sliding Mode Controllers with Integral Compensation', IEEE Transactions on Industry Applications, Vol.21, NO.5, pp 883-892, September/October 1991.
![Page 38: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/38.jpg)
38
A FACTS based Dynamic Capacitor Scheme for Voltage Stabilization and
Power Quality Enhancement
A FACTS based Dynamic Capacitor Scheme for Voltage Stabilization and
Power Quality Enhancement
![Page 39: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/39.jpg)
39
Abstract
Power Quality voltage problems in a power system may be either at system frequency or due to transient surges with higher frequency components.
These are called switching-type over-voltages which can be produced during opening or closing a switch and can be severe in certain cases.
The paper presents a low-cost FACTS based dynamic capacitor
compensator DCC- scheme for voltage compensation and power quality enhancement.
The FACTS –DCC dynamic compensator is a member of a family of smart power low cost compensators developed by the First Author.
![Page 40: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/40.jpg)
40
Introduction
The growing use of nonlinear industrial type or inrush type electric loads can cause a real challenge to power quality for electric utilities around the world, especially in the current era of the unregulated power market where: competition, supply quality, security and reliability are key issues for any economic survival.
Power Quality over voltage conditions in a power system may be either at system frequency or due to transient surges with higher frequency components.
With EHV transmission systems, lightning is less of a problem because lightning surges rarely reach the impulse withstand voltage of the system equipment, e.g. 400 kV circuit breakers are impulse tested with an impulse 1425 kV , (1 us wave front to peak voltage and 50% of peak voltage). In EHV systems, switching surges thus become relatively more important [1].
![Page 41: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/41.jpg)
41
Cont. / Introduction
The problem of the dynamic switching overvolatges affects also voltage stability of large non linear / motorized loads. It can increase the transmission line losses, and decrease the overall power factor [8].
Solid state AC controllers are widely Solid state AC controllers are widely used to convert AC power for feeding number of electrical loads such as adjustable speed drives, arc furnaces, power supplies etc.
Some of theses power converter controllers behave as nonlinear loads because they generally draw a non- sinusoidal current from AC sources.
The paper presents a new low cost FACTS based dynamic
compensator scheme (DCC) for improving the voltage stability and enhancing power quality for hybrid linear/nonlinear and motorized load.
The problem of the dynamic switching overvolatges affects also voltage stability of large non linear / motorized loads. It can increase the transmission line losses, and decrease the overall power factor [8].
Solid state AC controllers are widely Solid state AC controllers are widely used to convert AC power for feeding number of electrical loads such as adjustable speed drives, arc furnaces, power supplies etc.
Some of theses power converter controllers behave as nonlinear loads because they generally draw a non- sinusoidal current from AC sources.
The paper presents a new low cost FACTS based dynamic
compensator scheme (DCC) for improving the voltage stability and enhancing power quality for hybrid linear/nonlinear and motorized load.
![Page 42: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/42.jpg)
42
The System under study
Fig.1 (a) depicts the single line diagram of the sample radial 138 kV (L-L) AC Power System.
![Page 43: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/43.jpg)
43
MATLAB Sim-Power System Model
Fig.1 (b) shows the MATLAB block diagram.
![Page 44: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/44.jpg)
44
The MATLAB Sim-Power System functional model of the hybrid (linear, non linear and motorized) load is shown in Fig.2.
![Page 45: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/45.jpg)
45
New Dynamic Capacitor Compensator (DCC) scheme comprising a switched power filter
![Page 46: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/46.jpg)
46
Controller Design
Fig.4 shows the proposed novel Tri-loop (PI) Proportional plus Integral, dynamic error driven sinusoidal SPWM switching controller.
![Page 47: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/47.jpg)
47
The Tri-loop dynamic controller is used to stabilize the load bus voltage by regulated pulse width switching of the two IGBT solid state switches.
The three regulating key loops are: Loop 1 – the main loop for the dynamic voltage error using the RMS voltage at the load bus; this loop is to
maintain the voltage at the load bus at a reference value by modulating the admittance of the compensator. Loop 2 – the dynamic error is using RMS dynamic load current. This loop is an auxiliary loop to compensate for any
sudden electrical load excursions. Loop 3 – the Harmonic ripple loop is used to provide an effective dynamic tracking control to suppress any sudden
current ripples and compensate the AC system power transfer capability even under switching excursions.
The Tri-loop dynamic controller is used to stabilize the load bus voltage by regulated pulse width switching of the two IGBT solid state switches.
The three regulating key loops are: Loop 1 – the main loop for the dynamic voltage error using the RMS voltage at the load bus; this loop is to
maintain the voltage at the load bus at a reference value by modulating the admittance of the compensator. Loop 2 – the dynamic error is using RMS dynamic load current. This loop is an auxiliary loop to compensate for any
sudden electrical load excursions. Loop 3 – the Harmonic ripple loop is used to provide an effective dynamic tracking control to suppress any sudden
current ripples and compensate the AC system power transfer capability even under switching excursions.
Cont. / Controller DesignCont. / Controller Design
![Page 48: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/48.jpg)
48
The following Figures show the load voltage, current, and active power, reactive power, the active vs. reactive power, and the transmitted power loss; withoutwithout the proposed low cost FACTS Dynamic Capacitor Compensator (DCC).
![Page 49: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/49.jpg)
49
The following Figures show the load voltage, current, and active power, reactive power, the active vs. reactive power, withwith the proposed low cost FACTS Dynamic Capacitor Compensator (DCC).
The following Figures show the load voltage, current, and active power, reactive power, the active vs. reactive power, withwith the proposed low cost FACTS Dynamic Capacitor Compensator (DCC).
![Page 50: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/50.jpg)
50
ConclusionsConclusionsConclusionsConclusions
The paper presents a low cost FACTS Based Capacitor FACTS Based Capacitor Compensator (DCC)Compensator (DCC) for a radial 138 kV L-L sample test system. Digital simulation and comparison between without and with figures validated the following:
The receiving load bus voltage without the FACTS Based Capacitor FACTS Based Capacitor Compensator (DCC)Compensator (DCC) was about 0.66 pu when reaching steady state. Using the FACTS (DCC) compensator it is increased to about 0.96 pu (which is acceptable -5% from 1 pu).
The receiving load bus current is increased from 0.36 pu to 0.62 pu with the FACTS Based Capacitor Compensator (DCC).FACTS Based Capacitor Compensator (DCC).
The received active power at the hybrid load bus is increased from 0.36 pu to 0.95 pu.
The received reactive power at the hybrid load side is decreased from 0.2 pu to -0.5pu.
The receiving end power factor is also increased from 0.832 lag to 0.95 lag.
The transmitted power loss is decreased from 0.042 pu to 0.017 pu (about 40% less).
The paper presents a low cost FACTS Based Capacitor FACTS Based Capacitor Compensator (DCC)Compensator (DCC) for a radial 138 kV L-L sample test system. Digital simulation and comparison between without and with figures validated the following:
The receiving load bus voltage without the FACTS Based Capacitor FACTS Based Capacitor Compensator (DCC)Compensator (DCC) was about 0.66 pu when reaching steady state. Using the FACTS (DCC) compensator it is increased to about 0.96 pu (which is acceptable -5% from 1 pu).
The receiving load bus current is increased from 0.36 pu to 0.62 pu with the FACTS Based Capacitor Compensator (DCC).FACTS Based Capacitor Compensator (DCC).
The received active power at the hybrid load bus is increased from 0.36 pu to 0.95 pu.
The received reactive power at the hybrid load side is decreased from 0.2 pu to -0.5pu.
The receiving end power factor is also increased from 0.832 lag to 0.95 lag.
The transmitted power loss is decreased from 0.042 pu to 0.017 pu (about 40% less).
![Page 51: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/51.jpg)
51
References
[1] Guile, & Paterson, Electrical Power Systems: vol.2, Pergamon international [1] Guile, & Paterson, Electrical Power Systems: vol.2, Pergamon international library of science, 1977.library of science, 1977.
[2] A.M.Sharaf, “Harmonic interference from distribution systems”, IEEE [2] A.M.Sharaf, “Harmonic interference from distribution systems”, IEEE Winter Meeting, New York, 1982.Winter Meeting, New York, 1982.
[3] A.M.Sharaf, H.Huang, “Flicker control using rule based modulated passive [3] A.M.Sharaf, H.Huang, “Flicker control using rule based modulated passive power filters”, Electric Power System Research Journal 33 (1995) 49-52.power filters”, Electric Power System Research Journal 33 (1995) 49-52.
[4] A.M.Sharaf, C.Gua, and H.Huang, “A Smart Modulated Filter for Energy [4] A.M.Sharaf, C.Gua, and H.Huang, “A Smart Modulated Filter for Energy Conservation in Utilization Network”, IACPSS, April 6-8, 1997, Al-Ain, UAE, pp Conservation in Utilization Network”, IACPSS, April 6-8, 1997, Al-Ain, UAE, pp 211-212.211-212.
[5] A.M.Sharaf, S.S.Shokralla and A.S.Abd El-Ghaffar, “Efficient Power Tracking [5] A.M.Sharaf, S.S.Shokralla and A.S.Abd El-Ghaffar, “Efficient Power Tracking using an Error Driven Modulated Passive Filter”, AEIC’ 95, AL-AZHAR using an Error Driven Modulated Passive Filter”, AEIC’ 95, AL-AZHAR Conference, December 16 – 19, 1995.Conference, December 16 – 19, 1995.
[6] A.M.Sharaf, P.Kreidi, “Power Quality enhancement and harmonic reduction [6] A.M.Sharaf, P.Kreidi, “Power Quality enhancement and harmonic reduction using dynamic power filters”, ELECTRIMACS 2002. Montreal, Quebec, Canada, using dynamic power filters”, ELECTRIMACS 2002. Montreal, Quebec, Canada, August 18-21, 2002.August 18-21, 2002.
[7] A.M.Sharaf, P.Kreidi, “Power Quality enhancement using a unified [7] A.M.Sharaf, P.Kreidi, “Power Quality enhancement using a unified compensator and switched filter “, ICREPQ’ 2003, Vigo-Spain, April 9-11, compensator and switched filter “, ICREPQ’ 2003, Vigo-Spain, April 9-11, 2003.2003.
[8] Uzunoglu, M., Kocatepe, C. and Yumurtaci, R. (2004) “Voltage stability [8] Uzunoglu, M., Kocatepe, C. and Yumurtaci, R. (2004) “Voltage stability analysis in the power systems including non-linear loads”, European analysis in the power systems including non-linear loads”, European Transactions on Electrical Power, January–February, Vol. 14, No. 1, pp.41–56.Transactions on Electrical Power, January–February, Vol. 14, No. 1, pp.41–56.
[9] B.Singh, V.Verma, A.Chandra and K.Al-Haddad, “Hybrid filters for power [9] B.Singh, V.Verma, A.Chandra and K.Al-Haddad, “Hybrid filters for power quality improvement”, IEE Proc.Gener.Transm.Distrib., Vol. 152, No.3, May quality improvement”, IEE Proc.Gener.Transm.Distrib., Vol. 152, No.3, May 2005.2005.
[1] Guile, & Paterson, Electrical Power Systems: vol.2, Pergamon international [1] Guile, & Paterson, Electrical Power Systems: vol.2, Pergamon international library of science, 1977.library of science, 1977.
[2] A.M.Sharaf, “Harmonic interference from distribution systems”, IEEE [2] A.M.Sharaf, “Harmonic interference from distribution systems”, IEEE Winter Meeting, New York, 1982.Winter Meeting, New York, 1982.
[3] A.M.Sharaf, H.Huang, “Flicker control using rule based modulated passive [3] A.M.Sharaf, H.Huang, “Flicker control using rule based modulated passive power filters”, Electric Power System Research Journal 33 (1995) 49-52.power filters”, Electric Power System Research Journal 33 (1995) 49-52.
[4] A.M.Sharaf, C.Gua, and H.Huang, “A Smart Modulated Filter for Energy [4] A.M.Sharaf, C.Gua, and H.Huang, “A Smart Modulated Filter for Energy Conservation in Utilization Network”, IACPSS, April 6-8, 1997, Al-Ain, UAE, pp Conservation in Utilization Network”, IACPSS, April 6-8, 1997, Al-Ain, UAE, pp 211-212.211-212.
[5] A.M.Sharaf, S.S.Shokralla and A.S.Abd El-Ghaffar, “Efficient Power Tracking [5] A.M.Sharaf, S.S.Shokralla and A.S.Abd El-Ghaffar, “Efficient Power Tracking using an Error Driven Modulated Passive Filter”, AEIC’ 95, AL-AZHAR using an Error Driven Modulated Passive Filter”, AEIC’ 95, AL-AZHAR Conference, December 16 – 19, 1995.Conference, December 16 – 19, 1995.
[6] A.M.Sharaf, P.Kreidi, “Power Quality enhancement and harmonic reduction [6] A.M.Sharaf, P.Kreidi, “Power Quality enhancement and harmonic reduction using dynamic power filters”, ELECTRIMACS 2002. Montreal, Quebec, Canada, using dynamic power filters”, ELECTRIMACS 2002. Montreal, Quebec, Canada, August 18-21, 2002.August 18-21, 2002.
[7] A.M.Sharaf, P.Kreidi, “Power Quality enhancement using a unified [7] A.M.Sharaf, P.Kreidi, “Power Quality enhancement using a unified compensator and switched filter “, ICREPQ’ 2003, Vigo-Spain, April 9-11, compensator and switched filter “, ICREPQ’ 2003, Vigo-Spain, April 9-11, 2003.2003.
[8] Uzunoglu, M., Kocatepe, C. and Yumurtaci, R. (2004) “Voltage stability [8] Uzunoglu, M., Kocatepe, C. and Yumurtaci, R. (2004) “Voltage stability analysis in the power systems including non-linear loads”, European analysis in the power systems including non-linear loads”, European Transactions on Electrical Power, January–February, Vol. 14, No. 1, pp.41–56.Transactions on Electrical Power, January–February, Vol. 14, No. 1, pp.41–56.
[9] B.Singh, V.Verma, A.Chandra and K.Al-Haddad, “Hybrid filters for power [9] B.Singh, V.Verma, A.Chandra and K.Al-Haddad, “Hybrid filters for power quality improvement”, IEE Proc.Gener.Transm.Distrib., Vol. 152, No.3, May quality improvement”, IEE Proc.Gener.Transm.Distrib., Vol. 152, No.3, May 2005.2005.
![Page 52: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/52.jpg)
A NOVEL MAXIMUM POWER TRACKING CONTROLLER FOR A STAND-ALONE PHOTOVOLTAIC DC MOTOR DRIVE
A.M. Sharaf, SM IEEEDepartment of Electrical and Computer
EngineeringUniversity of New Brunswick
![Page 53: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/53.jpg)
53
PRESENTATION OUTLINE
Introduction System Model Description Novel Dynamic Error Driven Self Adjusting
Controller (SAC) Digital Simulation Results Conclusions Future Work
![Page 54: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/54.jpg)
54
Introduction
The advantages of PV solar energy: Clean and green energy source that can
reduce green house gases Highly reliable and needs minimal
maintenance Costs little to build and operate ($2-3/Wpeak) Almost has no environmental polluting impact Modular and flexible in terms of size, ratings
and applications
![Page 55: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/55.jpg)
55
Maximum Power Point Tracking (MPPT)
The photovoltaic system displays an inherently nonlinear current-voltage (I-V) relationship, requiring an online search and identification of the optimal maximum power operating point.
MPPT controller/interface is a power electronic DC/DC converter or DC/AC inverter system inserted between the PV array and its electric load to achieve the optimum characteristic matching.
PV array is able to deliver maximum available solar power that is also necessary to maximize the photovoltaic energy utilization in stand-alone energy utilization systems (water pumping, ventilation)
![Page 56: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/56.jpg)
56
I-V and P-V characteristics of a typical PV array at a fixed ambient temperature and solar irradiation condition
![Page 57: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/57.jpg)
57
The performance of any stand-alone PV system depends on:
Electric load operating conditions/Excursions/ Switching
Ambient/junction temperature (Tx) Solar insolation/irradiation variations (Sx)
![Page 58: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/58.jpg)
58
System Model Description
Key components: PV array module model Power conditioning filter: ♦ Blocking Diode ♦ Input filter (Rf & Lf)
Storage Capacitor (C1) Four-Quadrant PWM converter feeding the PMDC (Permanent Magnet Direct Current) motor (1-15kW size)
![Page 59: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/59.jpg)
59
Photovoltaic powered Four-Quadrant PWM converter PMDC motor drive system
![Page 60: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/60.jpg)
60
Novel Dynamic Error Driven Self Adjusting Controller (SAC)
Three regulating loops: The motor reference speed (ωm-reference)
trajectory tracking loop The first supplementary motor current (Im) limiting loop The second supplementary maximum photovoltaic power (Pg) tracking loop
![Page 61: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/61.jpg)
61Dynamic tri-loop self adjusting control (SAC) system
![Page 62: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/62.jpg)
62
The global error signal (et) comprises
3-dimensional excursion vectors (ew, ei, ep)
The control modulation ΔVc is
β is the specified squashing order (2~3) │Re│ is the magnitude of the hyper-plane
error excursion vector at time instant k
![Page 63: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/63.jpg)
63
The loop weighting factors (γw, γI and γp) and the parameters k0 and β are assigned
to minimize the time-weighted excursion index J0
where N= T0/Tsample
T0: Largest mechanical time constant (10s) Tsample: Sampling time (0.2ms) t(k)=k·Tsample: Time at step k in seconds
![Page 64: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/64.jpg)
64
Digital Simulation Results
Photovoltaic powered Four-Quadrant PWM converter PMDC motor drive system model using the
MATLAB/Simulink/SimPowerSystems software
![Page 65: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/65.jpg)
65
Test Variations of ambient temperature and solar irradiation
Variation of
ambient temperature (Tx)
Variation of
solar irradiation (Sx)
![Page 66: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/66.jpg)
66
For trapezoidal reference speed trajectory
Ig vs. time
Pg vs. time
Vg vs. time
Vg vs. Ig
![Page 67: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/67.jpg)
67
For trapezoidal reference speed trajectory(Continue)
Pg vs. Ig & Vg
ωref & ωm vs. time
Iam vs. time
ωm vs. Te
![Page 68: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/68.jpg)
68
For sinusoidal reference speed trajectory
Ig vs. time
Pg vs. time
Vg vs. time
Vg vs. Ig
![Page 69: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/69.jpg)
69
For sinusoidal reference speed trajectory(Continue)
Pg vs. Ig & Vg
ωref & ωm vs. time
Iam vs. time
ωm vs. Te
![Page 70: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/70.jpg)
70
The digital simulation results validate the tri-loop dynamic error driven Self Adjusting Controller (SAC), ensures:
Good reference speed trajectory tracking with a small overshoot/undershoot and minimum steady state error The motor inrush current Im is kept to a specified limited value Maximum PV solar power/energy tracking near knee point operation can be also achieved
![Page 71: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/71.jpg)
71
Conclusions
The proposed dynamic error driven controller requires only the PV array output voltage and current signals and the DC motor speed and current signals that can be easily measured.
The low cost stand-alone photovoltaic renewable energy scheme is suitable for village electricity application in the range of (150 watts to 15000 watts), mostly for water pumping and irrigation use in arid developing countries.
![Page 72: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/72.jpg)
72
Future Work
Other PV-DC, PV-AC and Hybrid PV/Wind energy utilization schemes
New control strategies
![Page 73: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/73.jpg)
73
Future Work (Continue) Novel Dynamic Error DrivenSliding Mode Controller (SMC)
Three regulating loops: The motor reference speed (ωm-reference)
trajectory tracking loop The first supplementary motor current (Im) limiting loop The second supplementary maximum photovoltaic power (Pg) tracking loop
![Page 74: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/74.jpg)
74
Dynamic tri-loop error-driven Sliding Mode Control (SMC) system
![Page 75: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/75.jpg)
A Low Cost Dynamic Voltage Stabilization Scheme for Standalone
Wind Induction Generator System
![Page 76: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/76.jpg)
76
Outline
1.Introduction 2.Standalone Wind Energy System 3.Dynamic Series Switched Capacitor
Compensation including two parts: Digital Simulation Models and Dynamic Simulation Results
4.Conclusions 5.Future Work References
![Page 77: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/77.jpg)
77
1. Introduction
Wind energy has become one of the most significant, alternative energy resources.
Most wind turbines(15-200kw) use the three phase asynchronous induction generator for its low lost, reliable and less maintenance.
However, the voltage stability of a wind driven induction generator system is fully dependent on wind gusting conditions and electrical load changes[1-3].
New interface technology is needed such as DSSC and other MPF/CCcompensation scheme [1-3].
![Page 78: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/78.jpg)
78
1. Introduction: What is DSSC? DSSC is a low cost dynamic series switched
capacitor (DSSC) interface compensation scheme.
Capacitance in parallel or series of the DSSC scheme are interfaced with the output feeder lines.
DSSC scheme can be used to improve the induction generator voltage stability and ensure dynamic voltage stabilization under varying wind and load conditions, thus prevent loss of severe generator bus voltage excursions.
![Page 79: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/79.jpg)
79
2. Standalone Wind Energy System
Figure 1 shows Standalone Wind Energy Conversion Scheme Diagram with Hybrid Load and Dynamic Series Switched Capacitor Compensations
![Page 80: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/80.jpg)
80
2. Standalone Wind Energy System
Figure 2 shows Low Cost Dynamic Series Switched Capacitor (DSSC) Stabilization Scheme using Gate Turn off GTO switching Device
![Page 81: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/81.jpg)
81
2. Standalone Wind Energy System
Figure 3 shows the Hybrid Electrical Load
![Page 82: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/82.jpg)
82
3. Dynamic Series Switched Capacitor Compensation
A sample test standalone wind induction generator system (WECS) is modeled using the Matlab/ Simulink/ Sim-Power Block-set software environment.
![Page 83: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/83.jpg)
83
3. Dynamic Series Switched Capacitor Compensation
Figure 4 shows the Unified Systems Matlab/Simulink Functional Model
![Page 84: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/84.jpg)
84
3. Dynamic Series Switched Capacitor Compensation
Figure 5 shows Tri-loop Error Driven PID Controlled PWM Switching Scheme
![Page 85: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/85.jpg)
85
3. Dynamic Series Switched Capacitor Compensation
Linear and non-linear load excursionsFigure 6 in next slide depicts the digital
simulation dynamic response to both in linear and nonlinear load excursion.
From time interval 0.1s to 0.3s, we applied 50% (100kVA) linear load; from 0.4s-0.6s, we applied 60% (120kVA) non-linear load.
So the DSSC can stabilize for both linear and nonlinear load excursions and ensure the generator bus stabilization
![Page 86: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/86.jpg)
86
3. Dynamic Series Switched Capacitor Compensation
Without DSSC Compensation
With DSSC Compensation
Figure 6
![Page 87: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/87.jpg)
87
3. Dynamic Series Switched Capacitor Compensation
Under inrush induction motor load excursion
Figure 7 in the next slide shows the dynamic simulation response to the induction motor load excursions.
From time 0.2s to0.4s, we applied about 20% (20kVA) induction motor load.
From the figure we can see that DSSC did not compensate for this inrush motor load excursions adequately.
![Page 88: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/88.jpg)
88
3. Dynamic Series Switched Capacitor Compensation Without DSSC
Compensation
With DSSC Compensation
Figure 7
![Page 89: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/89.jpg)
89
3. Dynamic Series Switched Capacitor Compensation
Under wind excursion
Figure 8 in the next slide shows the dynamic simulation response to wind excursions
From 0.3s-0.6s, the wind speed was decreased to 6m/s from initial value 10m/s.
From figure 8 we can see that DSSC did compensate wind excursion, the voltage at generate bus keeps 1.0pu.
![Page 90: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/90.jpg)
90
3. Dynamic Series Switched Capacitor Compensation
Without DSSC Compensation
With DSSC Compensation
Figure 8
![Page 91: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/91.jpg)
91
4. Conclusions
The low cost DSSC compensation scheme is very effective for the voltage stabilization under linear, non-liner passive load excursions as well as wind speed excursions.
But it can not compensate adequately for large inrush dynamic excursions such as induction motor.
The proposed low cost DSSC voltage compensation scheme is only suitable for isolated wind energy conversion systems feeding linear and non-linear passive type loads.
![Page 92: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/92.jpg)
92
5. Future Study
Another new compensation scheme that can compensate for a large inrush induction motor excursion will be studied in my future research.
That scheme will be very effective for bus voltage stabilization under linear, non-liner, inrush motor load excursions and wind excursions.
![Page 93: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/93.jpg)
93
Reference [1]. K.Natarajan, A.M Sharaf, S.Sivakumarand and
S.Nagnarhan, “Modeling and Control Design for Wind Energy Conversion Scheme using Self-Excited Induction Generator”, IEEE Trans. On E.C., Vol.2, pp.506-512, Sept.1987.
[2]. S.P.Singh, Bhim Singh and M.P.Jain, “Performance Characteristic and Optimum Utilization of a Cage Machine as a Capacitor excited Induction Generator”, IEEE Trans. On E.C., Vol. 5, No.4, pp.679-685, Dec.1990
[3]. A.Gastli, M.akherraz, M. Gammal, “Matlab/Simulink/ANN Based Modeling and Simulation of A Stand-Alone Self-Excited Induction Generator”, Proc. of the International Conference on Communication, Computer and Power, ICCCP’98, Dec.7-10 1998, Muscat, Sultanate of Oman, pp.93-98
![Page 94: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/94.jpg)
94
![Page 95: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/95.jpg)
95
Dr. A. M. Sharaf, SMIEEE
ULTRA HIGH SPEED PROTECTION OF SERIES COMPENSATED TRANSMISSION LINES USING WAVELET TRANSFORMS
![Page 96: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/96.jpg)
96
Presentation Outline
Introduction Wavelets Background Theory Proposed Scheme Study System: Single Line Diagram Study System: Test Cases Incremental Voltages and Currents Relaying Signals Wavelet Approximation Fault Direction Determination Travelling Waves Wavelet Thresholding Conclusion
![Page 97: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/97.jpg)
97
Introduction
Ultra High Speed (UHS) relaying is a new area of Power System Protection.
Protection of series compensated transmission lines can be best accomplished by a UHS relaying system.
But, UHS distance protection implementation methods are fraught with difficulty.
In this paper, a novel non-unit UHS distance protection scheme using wavelet transforms is proposed.
![Page 98: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/98.jpg)
98
Wavelets
Wavelets were first applied in the area of geophysics.
Today, Wavelets are employed in a variety of applications, from detecting High Impedance Faults to compression of fingerprint files.
A signal can be decomposed using Wavelet Transform as follows,
where
![Page 99: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/99.jpg)
99
Proposed Scheme
The measured phase voltages and currents are decoupled to obtain the modal components .
Incremental voltage and current signals are obtained.
Relaying signals a(t) and b(t)are obtained. Wavelet transform of relaying signals is obtained to
remove the high frequency travelling waves from the relaying signals. The resultant signals are denoted as “Approx.a(t)” and “Approx.b(t)”.
A forward fault is indicated if Approx.b(t) crosses a set threshold before Approx.a(t) does. Similarly, a reverse fault is indicated if Approx.a(t) crosses the threshold before Approx.b(t).
![Page 100: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/100.jpg)
Proposed Scheme
The incremental voltage signal is decomposed to level1 using Wavelet transform. The DWT first level coefficients are then used to reconstruct a signal which has power system frequency components and the decaying DC component removed from the original signal.
Noise and reflections from other points can cause relay mal-operation. Therefore, the travelling waves are thresholded.
The fault distance is given by x=(valpha/ (2*tau)) where valpha is alpha -mode propagation velocity, close to 2.99x108 m/s and tau is the time from positive (negative) peak to the next positive (negative) peak.
![Page 101: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/101.jpg)
101
Study System: Single Line Diagram
750kV, 250km un-transposed transmission line.
Local source of 10GVA and a remote source of 6GVA.
Figure 1: Single Line Diagram.
![Page 102: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/102.jpg)
102
Study System: Test Cases
The fault distance measured from the local source G1.
Voltage and current signals measured near the local AC source G1.
Fault inception time t = 28.5ms. Ground resistance 3 ohms.
![Page 103: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/103.jpg)
Incremental Voltage (Case 1)
The incremental voltage signal was obtained using cycle subtraction.
Figure 2a: Incremental Voltage for Case 1.
![Page 104: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/104.jpg)
Incremental Current (Case 1)
The incremental current signal was obtained using cycle subtraction.
Figure 2b: Incremental Current for Case 1.
![Page 105: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/105.jpg)
Incremental Voltage (Case 2)
The incremental voltage signal was obtained using cycle subtraction.
Figure 3a: Incremental Voltage for Case 2.
![Page 106: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/106.jpg)
Incremental Current (Case 2)
Figure 3b: Incremental Current for Case 2.
The incremental current signal was obtained using cycle subtraction.
![Page 107: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/107.jpg)
Relaying Signals (Case 1)
The synthesized relaying signals a(t) and b(t) are shown in Figure 4. The value of Rs =200 ohms.
Figure 4: Relaying Signals at the Local End for Case 1.
![Page 108: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/108.jpg)
Relaying Signals (Case 2)
The synthesized relaying signals a(t) and b(t) are shown in Figure 5. The value of Rs =200 ohms.
Figure 5: Relaying Signals at the Local End for Case 2.
![Page 109: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/109.jpg)
Wavelet Approximation (Case 1)
In order to utilize the relaying signals for fault direction determination, travelling waves are removed using Wavelet Transform.
Figure 6: Wavelet Approximated Relaying Signals at the Local End for Case 1.
![Page 110: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/110.jpg)
Wavelet Approximation (Case 2)
In order to utilize the relaying signals for fault direction determination, travelling waves are removed using Wavelet Transform.
Figure 7: Wavelet Approximated Relaying Signals at the Local End for Case 2.
![Page 111: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/111.jpg)
Fault Direction Determination
For cases 1 and 2, as evident in Figure 6 and Figure 7 in previous slides, b(t) starts increasing before a(t) , indicating a forward fault.
![Page 112: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/112.jpg)
Travelling Waves (Case 1)
Wavelets transform is utilized to obtain the travelling waves from the incremental voltage signals. The “Mother Wavelet” chosen was Daubechies “db3”.
Figure 8: Travelling Waves Signals obtained at the Local End for Case 1.
![Page 113: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/113.jpg)
Travelling Waves (Case 2)
Wavelets transform is utilized to obtain the travelling waves from the incremental voltage signals. The “Mother Wavelet” chosen was Daubechies “db3”.
Figure 9: Travelling Waves Signals obtained at the Local End for Case 2.
![Page 114: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/114.jpg)
Wavelet Thersholding (Case 1)
The travelling waves signals are thresholded using hard thresholding. Thresholding level = 25kV.
Figure 10: Wavelet Thresholded Signals obtained at the Local End for Case 1.
![Page 115: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/115.jpg)
Wavelet Thresholding (Case 2)
The travelling waves signals are thresholded using hard thresholding. Thresholding level = 25kV.
Figure 11: Wavelet Thresholded Signals obtained at the Local End for Case 2.
![Page 116: 1 ELECTRIC POWER QUALITY, HARMONIC REDUCTION AND ENERGY SAVING USING MODULATED POWER FILTERS AND CAPACITOR COMPENSATORS POWER QUALITY-PQ Professor Dr](https://reader034.vdocument.in/reader034/viewer/2022052701/56649d265503460f949fd945/html5/thumbnails/116.jpg)
116
Conclusion
Novel UHS distance relaying scheme is presented.
Fault distance is calculated using the travelling waves present in the incremental voltage signal directly.
The scheme is able to utilize the first backward travelling wave entering the relay as opposed to utilizing the synthesized relaying signals for distance calculation, which is prone to error.
Cross-correlation function is not used to determine the fault distance.
The relaying signals are processed using the Wavelet transform instead of conventional filtering methods.