1 memb113: engineering graphics & cae 11 auxilliary view
TRANSCRIPT
22
11 A
UX
ILL
IAR
Y V
IEW
11 A
UX
ILL
IAR
Y V
IEW
MEMB113 | Dept. of Mechanical Engineering | UNITEN | 2005
Auxiliary View
Object may be irregular face - inclined to the normal planes of projectionTrue shape can be obtained by projection to an auxiliary plane parallel to the faceThe view is know as auxiliary viewExamples of objects requiring auxiliary views:
33
11 A
UX
ILL
IAR
Y V
IEW
11 A
UX
ILL
IAR
Y V
IEW
MEMB113 | Dept. of Mechanical Engineering | UNITEN | 2005
Auxiliary View
Auxiliary view must be projected from principal view which provides the edge view of the inclined irregular face
44
11 A
UX
ILL
IAR
Y V
IEW
11 A
UX
ILL
IAR
Y V
IEW
MEMB113 | Dept. of Mechanical Engineering | UNITEN | 2005
Auxiliary View
Measurements of length are projected from the edge view of the inclined irregular faceMeasurements of width are transferred from other principal view, normally measured from reference plane (RP)Auxiliary views should always be drawn in 3rd angle projection
55
11 A
UX
ILL
IAR
Y V
IEW
11 A
UX
ILL
IAR
Y V
IEW
MEMB113 | Dept. of Mechanical Engineering | UNITEN | 2005
Auxiliary View
Common auxiliary viewView obtained by looking perpendicularly at the inclined face and projecting the true shape on auxiliary planeRemoved view, where the view is moved from its normal position without changing orientation - for convenience, clarity, dimensioning purposes, etc. The word 'view' and direction 'A' (e.g) should be used.If the removed view need to be orientated, the number of degrees and its direction must be stated
66
11 A
UX
ILL
IAR
Y V
IEW
11 A
UX
ILL
IAR
Y V
IEW
MEMB113 | Dept. of Mechanical Engineering | UNITEN | 2005
Auxiliary View
77
11 A
UX
ILL
IAR
Y V
IEW
11 A
UX
ILL
IAR
Y V
IEW
MEMB113 | Dept. of Mechanical Engineering | UNITEN | 2005
Auxiliary View
88
11 A
UX
ILL
IAR
Y V
IEW
11 A
UX
ILL
IAR
Y V
IEW
MEMB113 | Dept. of Mechanical Engineering | UNITEN | 2005
99
11 A
UX
ILL
IAR
Y V
IEW
11 A
UX
ILL
IAR
Y V
IEW
MEMB113 | Dept. of Mechanical Engineering | UNITEN | 2005
Auxiliary View
Producing auxiliary viewDraw front view, and side viewDraw reference line/plane (RP), any position.Project length from front viewComplete the widths, arc, circles etc.