1

NS1000 V3.0

- Hospitality features-

Rev1.1 31 July., 2013

2

Table of Contents

1. Overview2. Features3. How to program

3

Chapter 1

Overview

4

1. Overview

Use special hotel features for effective and productive management.Solution

A variety of hotel functions are possible when combined with a Fedelio or other PMS system. Including check in/out, wake up calls, message waiting LED , room status, and call accounting.

Wake-up Calls/ Remote Wake-up Calls

Features and Benefits >>

Available to set from 3rd Party SIP phone

Hotel guests can set various wake-up call message. Wake-up calls can also be set by an operator.

External relay control External sensing devices, such as security alarms or smoke detectors, can be installed

2 phones can be allocated with same EXT No. at each room

Any combination of phone devices can be allocated at each room under same EXT number.

MW lamp supported on 3rd Party SIP phone*

Check-in/check-out room status monitor

Property Management System (PMS) interface

MW lamp on 3rd Party SIP phone can be controlled.

Can check Room Status at a glance.Check-in/Check-out Room Status Monitor

* Features New for V3

5

Chapter 2

Features

6

2-1. Enhancement of 3rd party SIP Device

Function Overview

NS1000 will support following function from V3.0 for 3rd party SIP device

1) Message waiting indication There are 2 types of methods to deliver MWI to 3rd party SIP devices. NS1000 will support both type of Message interface a) Unsolicited mode :MWI without SIP subscription b) Standard mode :MWI with SIP subscription (*1)2) Timed Reminder (available for UT phone as well)  Time reminder control operation and function is same as level as SLT.

Following table shows 3rd Party SIP device, available above function

Note: *1 There is limitation. Max 64 SLT can be controlled by this mode

Device Type SIP DevicesIP Phone Grandstream (GXV3175)

Yealink (VP2009)Teledec(ND2200)

Softphone PC Counter path (Bria, x-lite)Android Counter path (Bria, x-lite)

Media5 (Media5-fone)IOS Counter path (Bria, x-lite)

Media5 (Media5-fone)

7

2-1. Enhancement of 3rd party SIP Device

Enhanced Video Phone connection

V3 will support P2P connection with H263(V2)/264(V3) video codec I/F

VPNBranch

NS1000HQ

SIP Carrier

Note: Hold and transfer operation from/to Video Phone is now supported

8

Function Overview

2-2. Features on TDE/NCP V4.2, V5, V6

NS1000 now catch up TDE/NCP V5 and V6 functions from V3.0Following functions will be available

DECT Paging without PS setting

Emergency Alert

Duplicate numbering plan for Hotel function

9

Chapter 3

Function and programing

10

How to make Conference Call

3.1 DECT Paging

3. Function and Program

1. Conference group call can be answered automatically without automatic Setting for each extension. 2. PT user can start “talking” by dialing any key during broadcasting mode, as well as DECT user.

Note: Conference group call has to be enabled or coordinator using class of service.

Ability to TalkEnable: PT/DECT can stat to talkDisable: Can not start to talk

Automatic AnswerEnable: Automatic Answer ModeDisable: No automatic Answer

<PBX Configuration> -> <3. Group> -> <9. Conference Group >

11

3.2 Emergency Alert -1

3. Function and Program

Emergency alert is displayed on PC installed in office, when emergency number is dialed from guest room. This feature is for SMDR based application such as Panasonic CA Call Accounting (free of charge).

Note 1. Alert is displayed twice. 2. Duration is output as zero second after dialing. 3. Version up is NOT required for CA Call Accounting 4. Up to 10 Emergency Dial can set up 5. System Option must be enabled

12

3.2 Emergency Alert -2

3. Function and Program

Enter Emergency Dial up to 30 digits

<PBX Configuration> -> <11. Maintenance> -> <1. Main > -> <SMDR Option TAB>

1. System setting for Emergency Notification timing

Select Emergency Notification either Stat and End Call or End call

<PBX Configuration> -> <7. TRS> -> <4. Emergency Dial >

2. Emergency Dial data

13

3.3 Duplicate Numbering plan for Hotel -

3. Function and Program

Duplicated extension numbering for hotel is now available by NS1000

Room1101(Ext 1101)

Room1102(Ext 1102)

..Room1111(Ext 1111)

Room1001(Ext 1001)

Room1002(Ext 1002)

..Room1011(Ext 1011)

Room901(Ext 901)

Room902(Ext 902)

..Room911(Ext 911)

..

Room201(Ext 201)

Room202(Ext 202)

..Room211(Ext 211)

Room101(Ext 101)

Room102(Ext 102)

..Room111(Ext 111)

On Right hand case, Extension # and Room Number can be matched.

In this case following operation is available

<One digit call>Dial 2 + Time Out or dial # to call extension 2 for room service.Dial 201 to call extension 201.

<Room No. = Extension No.>Dial 101 + Time Out or dial # to call Ext 101 (Room 101 )Dial 1011 to call Ext 1011 (Room 1011)

Note: This function is controlled by Reserved Bit (Default is Disable)

<Hotel Room /Extension Number>

14

3.3 Duplicate Numbering plan for Hotel -2

3. Function and Program

Activate Duplicate Extension Numbering

Reserved Bit 0E-2 must be on to enable this function

<PBX Configuration> -> <2. System> -> <9. System Option > -> <Reserved Bit TAB>

15

3.3 Duplicate Numbering plan for Hotel -3

3. Function and Program

Room1101(Ext 1101)

Room1102(Ext 1102)

..Room1111(Ext 1111)

Room1001(Ext 1001)

Room1002(Ext 1002)

..Room1011(Ext 1011)

Room901(Ext 901)

Room902(Ext 902)

..Room911(Ext 911)

..

Room201(Ext 201)

Room202(Ext 202)

..Room211(Ext 211)

Room101(Ext 101)

Room102(Ext 102)

..Room111(Ext 111)

<Hotel Room /Extension Number>

Programing Hint

To realize sample Extension number configuration and One digits service, following program setting must be done

1,1xx,10xx,11xx can be assignedas Extension number

16

END

17

Modification

20130730-01 　 3 NS1000 V3.0 Hospitality features_Rev1.0_30Jun2013.pptx - 1st release

20130731-02 　 3 NS1000 V3.0 Hospitality features_Rev1.1_31Jun2013.pptx - Add Video Phone operation P7