1 rev. new data sheet tec-as per is

2
KEMEX - DRY CHEMICAL POWDER CLASS D FOR BURNING METALS AS PER IS:4861 DESCRIPTION Kemex Brand Dry Chemical Powder For fire Class-D Specially for Extinguishing Metal Fire with high efficiency in fire class D. KEMEX DCP-CLASS-D is non-abrasive and non-combustible formulation which is free flowing Anti-Caking characteristics .TEC having High Melting Point this property helps for Extinction of metal Fires. DCP-CLASS-D Forms a protective layer in the form of a closed covering over the set of the fire. It has great heat absorbing effect .Prevention of the air and the cooling effect result in the fire being extinguished. Kemex DCP-CLASS D Fire having very high Melting point as comparatively all other Class DCP Powder. QUALITY ASSURANCE & APPROVALS Manufacturing process and quality control systems have been approved to ISO 9001:2008 Meet Requirements IS 4861-1984. APPLICATION Kemex dry chemical powder CLASS- D applied directly on metal Fire by using special type Type-D Extinguisher . It suitable for best fire fighting choice for high risk like alkali metal lithium, sodium, potassium, earth alkali metal like Calcium, strontium & Barium and light metal like aluminum, magnesium & there alloys metal . It is in used for fire Extinguisher, fixed installation & mobile fire tender for fighting class-D TOXICITY Kemex Dry chemical powder class-D is does not contain harmful ingredients, it is environmental friendly & non-Toxic to humans and animals .

Upload: vasant-kumar-varma

Post on 17-Dec-2015

214 views

Category:

Documents


1 download

DESCRIPTION

Deat Sheet Powder

TRANSCRIPT

  • KEMEX - DRY CHEMICAL POWDER CLASS D FOR BURNING METALS AS PER IS:4861

    DESCRIPTION

    Kemex Brand Dry Chemical Powder For fire Class-D Specially for Extinguishing Metal Fire with high efficiency in fire class D. KEMEX DCP-CLASS-D is non-abrasive and non-combustible formulation which is free flowing Anti-Caking characteristics .TEC having High Melting Point this property helps for Extinction of metal Fires. DCP-CLASS-D Forms a protective layer in the form of a closed covering over the set of the fire. It has great heat absorbing effect .Prevention of the air and the cooling effect result in the fire being extinguished. Kemex DCP-CLASS D Fire having very high Melting point as comparatively all other Class DCP Powder.

    QUALITY ASSURANCE & APPROVALS Manufacturing process and quality control systems have been approved to ISO 9001:2008 Meet Requirements IS 4861-1984.

    APPLICATION Kemex dry chemical powder CLASS- D applied directly on metal Fire by using special type Type-D Extinguisher . It suitable for best fire fighting choice for high risk like alkali metal lithium, sodium, potassium, earth alkali metal like Calcium, strontium & Barium and light metal like aluminum, magnesium & there alloys metal . It is in used for fire Extinguisher, fixed installation & mobile fire tender for fighting class-D

    TOXICITY Kemex Dry chemical powder class-D is does not contain harmful ingredients, it is environmental friendly & non-Toxic to humans and animals .

  • TECHNICAL PROPERTIES AT 250C

    PROPERTIES KEMEX DCP CLASS-D

    Apparent Density 0.75 to 1.18gm/ml

    Particle Size distribution a) Material passing through 125m. b) Material passing through 75m

    >99% >90%

    Free flowing characteristics The powder should flow down smoothly

    Water Repellence < 1.5%

    Suitable For D Class Fire

    STORAGE It should be store in a dry location in original 25kg HDPE drums until required for use to ensure a long storage life DCP For Metal Fire uses Special high performance free flowing additives & hydrophobing agents to ensure it withstands extreme climatic condition & provides easy handling during filling operation. ORDERING INFORMATION/PACKING

    Kemex Brand DCP For CLASS-D FIRE is Available in 5kg/10kg/25kg.&50kgs Packed in

    hermatically sealed in polyethylene bags &HDPC bags than packed in HDPE Drums.