1. safety instructions - ccw-tools · adequately supported with axle stands. # wear approved eye...
TRANSCRIPT
INSTRUCTIONS FOR:FRONT AXLE UPPER BALL JOINTEXTRACTOR/INSTALLER - VW T4MODEL NO: VSE725
1. SAFETY INSTRUCTIONS
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according tothese instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONALREQUIREMENTS, WARNINGS AND CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THEPURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY ANDWILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Suitable for removing and installing the upper front balljoint on-vehicle without the need to disassemble.Features a variety of adaptors used in different combinations for extracting and installing (see below).Supplied in a carry-case with each part numbered forsimple selection.2.2 ApplicationsVW: T4 2000 CC, T4 2500 CC
2. INTRODUCTION & APPLICATIONS
3. CONTENTS
VSE725 - 1 - 120607
! WARNING! Ensure Health and Safety, local authorityand general workshop practice regulations are adhered towhen using tools." DO NOT use the kit if any parts are missing or
damaged." DO NOT use the ball joint replacement tool
for any purpose other than that for which it is designed.
# Maintain the tool components in good and clean condition for best and safest performance.
# Ensure that a vehicle which has been jacked up is adequately supported with axle stands.
# Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.
# Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
# Keep children and other unauthorised persons away from the working area.
# Ensure there is adequate lighting prior to using the ball joint replacement tool.
IMPORTANT: These instructions are provided as aguide only. Always refer to the vehicle manufacturer�sservice instructions, or a proprietary manual, to establish the current procedure and data.
INSTALL EXTRACT
BALL JOINTBALL JOINT
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and componentparts without prior notice.IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK DistributorSealey Group,
Bury St. Edmunds,Suffolk.
www.sealey.co.ukWeb
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on towww.sealey.co.uk, email [email protected] or phone 01284 757500.
! WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.