1. the ip installer is located on the - learn nortek control€¦ · p1993x3 1. the ip installer is...
TRANSCRIPT
![Page 1: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/1.jpg)
P1993x3
49
![Page 2: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/2.jpg)
P1993x3
1. The IP installer is located on the
USB device included with the
eMerge system.
2. Double click the E3USB folder.
52
![Page 3: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/3.jpg)
P1993x3
1. The IP installer is located on the
USB device included with the
eMerge system.
2. Double click the E3USB folder.
3. Double click the “tools” folder.
53
![Page 4: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/4.jpg)
P1993x3
1. The IP installer is located on the
USB device included with the
eMerge system.
2. Double click the E3USB folder.
3. Double click the “tools” folder.
4. Place the IP Installer on your
desktop and open the program.
54
![Page 5: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/5.jpg)
P1993x3
1. The IP installer is located on the
USB device included with the
eMerge system.
2. Double click the E3USB folder.
3. Double click the “tools” folder.
4. Place the IP Installer on your
desktop and open the program.
5. You will see the MAC Address
and the Factory IP Address
192.168.0.250.
55
![Page 6: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/6.jpg)
P1993x3
1. The IP installer is located on the
USB device included with the
eMerge system.
2. Double click the E3USB folder.
3. Double click the “tools” folder.
4. Place the IP Installer on your
desktop and open the program.
5. You will see the MAC Address
and the Factory IP Address
192.168.0.250.
6. Highlight IP Address by left
clicking. Select “Set Network.”
56
![Page 7: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/7.jpg)
P1993x3
1. The IP installer is located on the
USB device included with the
eMerge system.
2. Double click the E3USB folder.
3. Double click the “tools” folder.
4. Place the IP Installer on your
desktop and open the program.
5. You will see the MAC Address
and the Factory IP Address
192.168.0.250.
6. Highlight IP Address by left
clicking. Select “Set Network.”
7. The factory IP Address, Subnet
Mask, and Gateway will appear.
57
![Page 8: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/8.jpg)
P1993x3
1. The IP installer is located on the
USB device included with the
eMerge system.
2. Double click the E3USB folder.
3. Double click the “tools” folder.
4. Place the IP Installer on your
desktop and open the program.
5. You will see the MAC Address
and the Factory IP Address
192.168.0.250.
6. Highlight IP Address by left
clicking. Select “Set Network.”
7. The factory IP Address, Subnet
Mask, and Gateway will appear.
8. If a static IP Address has been
provided, enter the IP Address.
58
![Page 9: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/9.jpg)
P1993x3
1. The IP installer is located on the
USB device included with the
eMerge system.
2. Double click the E3USB folder.
3. Double click the “tools” folder.
4. Place the IP Installer on your
desktop and open the program.
5. You will see the MAC Address
and the Factory IP Address
192.168.0.250.
6. Highlight IP Address by left
clicking. Select “Set Network.”
7. The factory IP Address, Subnet
Mask, and Gateway will appear.
8. If a static IP Address has been
provided, enter the IP Address.
9. Enter the IP Installer password
4321, and select “OK.”
59
![Page 10: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/10.jpg)
P1993x3
10. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
60
![Page 11: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/11.jpg)
P1993x3
10. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
11. The IP Address has been
successfully changed and
programming can begin.
61
![Page 12: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/12.jpg)
P1993x3
10. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
11. The IP Address has been
successfully changed and
programming can begin.
12. If a static IP Address has not
been provided, use DHCP until
static IP Address is issued.
62
![Page 13: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/13.jpg)
P1993x3
10. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
11. The IP Address has been
successfully changed and
programming can begin.
12. If a static IP Address has not
been provided, use DHCP until
static IP Address is issued.
13. Left click the IP Address and
select “Set Network.”
63
![Page 14: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/14.jpg)
P1993x3
10. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
11. The IP Address has been
successfully changed and
programming can begin.
12. If a static IP Address has not
been provided, use DHCP until
static IP Address is issued.
13. Left click the IP Address and
select “Set Network.”
14. Select DHCP. Enter the password
4321 and select “OK.”
64
![Page 15: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/15.jpg)
P1993x3
10. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
11. The IP Address has been
successfully changed and
programming can begin.
12. If a static IP Address has not
been provided, use DHCP until
static IP Address is issued.
13. Left click the IP Address and
select “Set Network.”
14. Select DHCP. Enter the password
4321 and select “OK.”
15. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
65
![Page 16: 1. The IP installer is located on the - Learn Nortek Control€¦ · P1993x3 1. The IP installer is located on the USB device included with the eMerge system. 2. Double click the](https://reader033.vdocument.in/reader033/viewer/2022060606/605c312ab378d858b31acced/html5/thumbnails/16.jpg)
P1993x3
10. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
11. The IP Address has been
successfully changed and
programming can begin.
12. If a static IP Address has not
been provided, use DHCP until
static IP Address is issued.
13. Left click the IP Address and
select “Set Network.”
14. Select DHCP. Enter the password
4321 and select “OK.”
15. While the IP Address is being
reconfigured, the screen will go
blank momentarily.
16. The IP Address has been
successfully changed and
programming can begin.
66