1 [translation: in the name of allah, the most merciful, the most kind.]
TRANSCRIPT
![Page 1: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/1.jpg)
1[Translation: In the name of Allah, the Most Merciful, the Most Kind.]
![Page 2: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/2.jpg)
2
REG NO: BME: 01083004 SECTION: BDEPARTMENT: MECHANICAL
THE UNIVERSITY OF LAHORE
![Page 3: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/3.jpg)
3
The Sparking Ignition engine.
The term spark-ignition engine is normally used torefer to internal combustion engines where the fuel-airmixture is ignited with a spark. The term contrasts with
![Page 4: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/4.jpg)
4
compression-ignition engines, where the heat fromcompression alone ignites the mixture. Spark-ignitionengines can be either two-stroke or four-stroke, and arecommonly referred to as "gasoline engines" in Americaand "petrol engines" in Britain. However, these terms arenot preferred, since spark-ignition engines can (andincreasingly are) run on fuels other than gasoline, such asauto gas (LPG), methanol, ethanol, compressed naturalgas (CNG), hydrogen, and (in drag racing) nitromethane.A four-stroke spark-ignition engine is an Otto cycleengine.
![Page 5: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/5.jpg)
5
Until recently, a major distinction between spark ignitionand compression-ignition engines has beenwhere the fuel is mixed - spark-ignition engines mix fueloutside the cylinders and compression-ignition enginesmix fuel inside the cylinders. However, both two-strokeand four-stroke spark-ignition engines are increasinglybeing designed with gasoline direct injection (GDi),eliminating this distinction between the two systems.
![Page 6: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/6.jpg)
6
Pressure - Volume Diagrams
• Graph of pressure as a function of cylinder volume above the piston
Bottom Dead Center - volume is maximum
Top Dead Center - volume is minimum
![Page 7: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/7.jpg)
7
Cylinder Volume
• Change in volume as piston goes up and down
Volume goingTDC
Volume going
![Page 8: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/8.jpg)
8
Change in VolumeV
olu
me
BDC TDC BDC
![Page 9: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/9.jpg)
9
P-V Diagram - Gas Engine
Bottom Dead CenterStart of compression stroke - volume above piston filled with fuel/air mixture
BDCTDC
Volume
Pre
ssure
![Page 10: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/10.jpg)
10
P-V Diagram - Gas Engine
Piston travels up, fuel/air compressed and pressure rises
BDCTDC
Volume
Pre
ssure
![Page 11: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/11.jpg)
11
P-V Diagram - Gas Engine
Top Dead CenterEnd of compression stroke - volume in cylinder at a minimum
BDCTDC
Volume
Pre
ssure
![Page 12: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/12.jpg)
12
P-V Diagram - Gas Engine
Then have an instantaneous introduction of heat, which increases pressure again
COMBUSTION BDCTDC
VolumePre
ssure
![Page 13: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/13.jpg)
13
P-V Diagram - Gas Engine
BDCTDC
Volume
Pre
ssure
Pressure forces piston down, creating torque on crank shaft
![Page 14: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/14.jpg)
14
P-V Diagram - Gas Engine
BDCTDC
Volume
Pre
ssure
Piston reaches bottom dead center again, exhaust valve opens, burned fuel/air expelled
![Page 15: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/15.jpg)
15
Gas Engine Efficiency
• Remember, efficiency is work out divided by heat in
• P-V diagram tells us both things
Heat in: temperature change from burning fuel
BDCTDC
Volume
Pre
ssure
Work out: area between curves
And, make a few assumptions, can calculate efficiency
![Page 16: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/16.jpg)
16
Gas Engine Efficiency
• Define compression ratio as:
• Then efficiency can be shown to be:
• Higher efficiency means higher compression ratio.
rVBDCVTDC
BDCTDC
Volume
Pre
ssure
e11
r0.4
![Page 17: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/17.jpg)
17
(sparking ignition engine)
Advantages for Spark Ignition Engines:- Increase efficiency at part load operating conditions byoperating at a higher effective compression ratio- Successfully avoid spark knock at full load conditions,even during rapid transients
![Page 18: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/18.jpg)
18
![Page 19: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/19.jpg)
19
Following is the explanation of the Four-Stroke and Two-Stroke SI Engines and their P-V Diagrams.
.
![Page 20: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/20.jpg)
Four Stroke SI Engine
Stroke 1: Fuel-air mixture introduced into cylinder through intake valve Stroke 2: Fuel-air mixture compressedStroke 3: Combustion (~constant volume) occurs and product gases expand doing workStroke 4: Product gases pushed out of the cylinder through the exhaust valve
CompressionStroke
PowerStroke
ExhaustStroke
A I R
CombustionProducts
Ignition
IntakeStroke
FUEL
Fuel/AirMixture
![Page 21: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/21.jpg)
Crank shaft
90o
180o
BC
TC0o
270o
Spark plug for SI engineFuel injector for CI engine
Top Center(TC)
BottomCenter(BC)
Valves
Clearancevolume
Cylinder wall
Piston
Stroke
CylinderComponents
![Page 22: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/22.jpg)
IVO - intake valve open, IVC – intake valve closeEVO – exhaust valve open, EVC – exhaust valve closeXb – burned gas mole fraction
Four-Stroke SI Engine
Exhaust gas residual
![Page 23: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/23.jpg)
23
Two Stroke SI Engine
The two-stroke engine is simpler mechanically thanthe four-stroke engine. The two-stroke engine deliversone power stroke every two strokes instead of one everyfour; thus it develops more power with the samedisplacement, or can be lighter and yet deliver the samepower. For this reason it is used in lawn mowers, chainsaws, small automobiles, motorcycles, and outboardmarine engines.
![Page 24: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/24.jpg)
24
![Page 25: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/25.jpg)
Two Stroke SI Engine
Intake (“Scavenging”)
Compression Ignition
ExhaustExpansion
Fuel-air-oilmixture
Fuel-air-oilmixture compressed
Crankshaft
Checkvalve
Exhaustport
![Page 26: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/26.jpg)
EPO – exhaust port open EPC – exhaust port closedIPO – intake port openIPC – intake port closed
Exhaust area
Intake area
Two-Stroke SI Engine
scavenging
![Page 27: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/27.jpg)
27
Achievements:• Three prototype pistons were manufactured: twopistons for a spark ignition engine and one pistonfor a compression ignition engine. All three weretested experimentally in single cylinder engines.Models of the piston operation were also developedto investigate the piston concept at differentoperating conditions.• Spark Ignition Engine Test Result SummaryThe spark ignition PRP prototypes demonstrated theutility of the PRP concept when applied to a sparkignition engine. At low loads, the piston behavedlike the elevated compression ratio, yielding a brakespecific fuel consumption (BSFC) improvement of3.5-10% during low load conditions. At high loadconditions, the PRP limited the peak cylinderpressure to that of the baseline (lower compressionratio) piston.
![Page 28: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/28.jpg)
Cylinder Arrangement
Single-cylinder engine gives one power stroke per crank revolution (2 stroke) or two revolutions (4 stroke). The torque pulses are widely spaced, and engine vibration and smoothness are significant problems.Used in small engine applications where engine size is more important Multi-cylinder engines spread out the displacement volume amongst multiple smaller cylinders. Increased frequency of power strokes produces smoother torque characteristics. Engine balance (inertia forcesassociated with accelerating and decelerating piston) better than singlecylinder.
Most common cylinder arrangements:- In-line 4-cylinder- In-line 6-cylinder- V-6 and V-8
![Page 29: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/29.jpg)
Power Regulation (Throttling)
An IC engine is basically an air engine, the more air you get into thecylinder, the more fuel you can burn, the more power you get out.The initial pressure in the cylinder is roughly equal to the pressurein the intake manifold.
Pressure in the intake manifold is varied by opening and closing thethrottle plate to change the pressure drop. Maximum air flow (andpower) achieved at wide-open-throttle (WOT). Minimum air flow at idle
PatmPint < Patm
Intake manifold
Fuel
WOT
Idle
![Page 30: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/30.jpg)
Basic Carburetor Design
Venturi
Throttle
Air Flow
Mixture to manifold
Fuel
![Page 31: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/31.jpg)
Fuel Injection System
Throttle
Fuel tank
Air intakemanifold
During start-up the components are cold so fuel evaporation is very slow, as a resultadditional fuel is added through a second injecting valve
![Page 32: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/32.jpg)
Superchargers and Turbochargers increase the power of an IC engineby raising the intake pressure and thus allowing more fuel to be burnedper cycle. Knock or autoignition phenomenon limit precompression.
Superchargers are compressors that are mechanically driven by theengine crankshaft and thus represent a parasitic load.
Compressor
Patm
Pint > Patm
![Page 33: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/33.jpg)
Turbochargers couple a compressor with a turbine driven by the exhaust gas. The compressor pressure is proportional to the engine speed
![Page 34: 1 [Translation: In the name of Allah, the Most Merciful, the Most Kind.]](https://reader035.vdocument.in/reader035/viewer/2022062515/56649cef5503460f949be4ad/html5/thumbnails/34.jpg)
The peak pressure in the exhaust system is only slightly greater than atmospheric – small P across turbine.
In order to produce enough power to run compressor the turbine speed must be very fast (100k-200k rev/min) – long term reliability an issue.
It takes time for turbine to get up to speed so when the throttle is opened suddenly there is a delay in achieving peak power - Turbo lag.
Waste gate valve controls the exhaust gas flow rate to the turbine.It is controlled by the intake manifold pressure
INTAKEAIR
EXHAUSTFLOW