10-013 l - sudoen.sudo.ru/data/doctxt/data/produktsiya/kambuz/... · conveyor is thus unnecessary....
TRANSCRIPT
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
10-013DOC. NO. 10-013LEDITION 3 05.10
Chain conveyor 90°
The basin is made of 1.2 mm stainlesssteel, quality AISI 304 (SS 2333) andequipped with turnable chain packagefor easy cleaning. The chain runs insideof the trough. The bottom of the troughis sloped from all corners to the strainer,facilitating drainage and cleaning. Allsurfaces are smooth and have a polishedfinish.The motor is controlled by a contactorwhich should be installed in an intendedplace in the dishwasher’s connection box.There is a choice of two motor execu-tions, depending on the installation ofthe dishwasher – before or after the dish-washer.A separate supply cable for the chainconveyor is thus unnecessary.The stainless steel, square 40x40 mmtubular stand ensures stability. All feetare height adjustable.The chain conveyor can be supplied forclockwise alternatively anti-clockwisefeeding.For further specification and optionalextras, please see overleaf.
● RIGID CONSTRUCTION
● STAINLESS STEEL
● MOTOR DRIVEN
● DRAIN WITH STRAINER
● EASY TO CLEAN
● FOR 500X500 MM RACKS
Model 97 68 20
Subject to changes without notice.
Scale 1:20Dimensions mm
CHAIN CONVEYOR 90°
10-013
Model 97 68 20
ModelFeeding
Voltage V Loading kWWeight kgs Shipping
volumem³clockwise anti-clockwise net gross
97 68 20* x -230
3~50/60440 3~60
0.18
80 87 1.10097 68 21* - x
97 68 22** x -0.10
97 68 23** - x
Specification
* To be installed on the unloading side of the dishwasher** To be installed on the loading side of the dishwasher
Optional extrasModel Description
16 89 96Switch box for start and stop (to be used when control is separatedfrom an Electrolux dishwasher)
Example of installation between clockwise chain conveyor,left-feeded dishwasher and roller conveyor.
1. Emergency stop2. Electrical connection – the motor is to be
connected to the dishwasher. All dishwasherstype WT are prepared for connection to chainconveyors. (Space for two contactors, connec-tion plate with relay for limit switch 24 V.)
3. Drain R 11/2" M.
Detail of marine foot:
A A
503
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Turntable 180°, dishwasher driven
10-017DOC. NO. 10-017LEDITION 1 07.08
Some Electrolux dishwasher models can per-form to their full potential, if combined with theElectrolux Handling System range. The modu-lar system allows to design ergonomic and reli-able solutions to handle, transport and sortgalleyware, obtaining the most effective flow inthe dishwashing room. The wide range containscord conveyors for trays, manual, motorized anddishwasher driven sorting tables and a variety ofroller, slide and cord conveyors for baskets.
EASY TO INSTALL• ±50 mm adjustable feet.• Intended for installation between adishwasher and a mobile roller conveyor.• Thick welded flanges for sturdy connectionbetween the units.
• All corners in the bottom of the basin arerounded.• The sloping bottom of the basin grants asmooth and rapid drainage.• Drive system on the underside of the unit toease basin surface access. EASY TOMAINTAIN• Basin constructed in AISI 304 1,2 mmstainless steel.• AISI 304 feet and square 40x40 mm tubularlegs.EASY ON THE ENVIRONMENT• 98% recyclable by weight. • CFC freepackaging.• Developed and produced in ISO 9001certified factory.For further specifications, please see overleaf.
• Provided with "key holes" and "snap on"system for fast and easy installation.• Clockwise and anti-clockwise models areavailable.EASY TO USE• The curve is driven by the dishwasher.• Basket movement underneath for improvedsafety.• Designed for 500x500 mm dishwashingbaskets.• Models are available only for unloadingareas.• 45° cut corner to reduce space usage.• “Click-in” function to be easily combinedwith the mobile roller conveyor.EASY TO CLEAN• All surfaces are smooth with polished finish.
Model 865050M
Subject to changes without notice.
Scale 1:20Dimensions mm
TURNTABLE 180°, DISHWASHER DRIVEN
10-017
Model 865050
Specification
Detail of marine foot
Ø9 (3x)
Ø60Ø47
ledoMgnideeF sgkthgieW emulovgnippihS
³mesivkcolc esivkcolcitna ten ssorg
M940568 x -53 24 008.1
M050568 - x
910 50±50±875
610
755
66266263 63 63333
681
530 530
1450
850
3 4
2
1
1. Drain DN 40 (G 1 1/2") ext.2. Emergency stop3. Docking device "CLICK IN"4. Hinge with pin
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment DOC. NO. 10-018L
EDITION 1 07.08N
10-018
Turntable 90° for loading/unloading,dishwasher driven
Some Electrolux dishwasher models can performto their full potential, if combined with theElectrolux Handling System range. The modularsystem allows to design ergonomic and reliablesolutions to handle, transport and sort galley-ware, obtaining the most effective flow in thedishwashing room. The wide range contains cordconveyors for trays, manual, motorized and dish-washer driven sorting tables and a variety of roller,slide and cord conveyors for baskets.
Model 865045M
EASY TO INSTALL• +50/50 mm adjustable feet.• Intended for installation between a dishwasherand a rack conveyor.• Thick welded flanges for sturdy connectionbetween the units.
• Provided with "key holes" and "snap on"system for fast and easy installation. • Clockwiseand anti-clockwise models are available.EASY TO USE• The curve is driven by the dishwasher.• Models are available both for the loading andunloading areas.• Designed for 500x500 mm dishwashing bas-kets.• 45° cut corner to reduce space usage.• Loading curves are provided with an anti-jamming device to avoid rack jam.EASY TO CLEAN• All surfaces are smooth with polished finish.• All corners in the bottom of the basin arerounded.
• The sloping bottom of the basin grants asmooth and rapid drainage.• Drive system on the underside of the unit toease basin surface access.EASY TO MAINTAIN• Basin constructed in AISI 304 1,2 mm stainlesssteel.• AISI 304 feet and square 40x40 mm tubularlegs.EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.• Developed and produced in ISO 9001 certifiedfactory.For further specifications, please see overleaf.
Subject to changes without notice.
TURNTABLE 90°, DISHWASHER DRIVEN
10-018
Dimensions mm
910 50±50±875
610
530
530
850
850
520
230 640 205.520478
367 253.5
21
910 50±50±875
610
530
530
850
850
520
230 640205.520478
367 253.5
2
1
1. Drain DN 40 (G 1 1/2") ext.2. Feeding bar
Model 865045M
1. Drain DN 40 (G 1 1/2") ext.2. Feeding bar
Model 865047M
Specification
ledoMotnoitisoPrehsawhsid
gnideeF sgkthgieW emulovgnippihS³m
esivkcolc esivkcolcitna ten ssorg
M540568gnidaolnu
x -
12 52 044.0M640568 - x
M740568gnidaol
x -
M840568 - x
Detail of marine foot
Ø9 (3x)
Ø60Ø47
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Receiving tables
10-023DOC. NO. 10-023LEDITION2 05.10
Model 27TRM
These sorting and receiving tables are intendedfor receiving and sorting of dirty dishes andshould be connected to a pre-rinse intermediaryunit or basin conveyor before the dishwasher.
EASY TO INSTALL• +50/-50mm adjustable feet.• Designed to be connected both to a pre-washintermediary unit or to a basin conveyor (con-nection kit is included).• Racks movement from right to left from theoperator’s point of view.EASY TO USE• Equipped with raised side edges all aroundreducing the possibility of crockery being pushedoff the table.
• Supplied with two shelves: an over-shelf toplace the dishwashing racks to fill them and,above, a stainless steel frame to store the emptyracks with movable racks supports.• The over-shelf can be inclined at both dish-washing or receiving side, the water outflow isgranted through a drainage.• Optional extras include small sink (T29),rubber scrapping ring with provision of space forgarbage can or cutlery trolley, tray slide whichcan incorporate a cutlery chute and support forcrate for empty bottles.EASY TO CLEAN• All surfaces are smooth with polished finish.• Double bent profile to eliminate sharp edges.
EASY TO MAINTAIN• Constructed in AISI 304 stainless steel withsquare 40x40mm tubular construction and legs.EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.Additional accessories as plain or grid stainlesssteel shelves, open guide unit for 3 dishwashingracks and drawers, are designed to be placedunder the table.For further specification and optional extras,please see overleaf.
Subject to changes without notice.
1884
-100+0
+0-100
1400
300
950
35
±50
±50270
64 635 101
65 65B C
A
800
L
550 45
C C
C - C:
A - A:
A
1
RECEIVING TABLES
Specification:
10-023
Optional extras
Model 17TLM
Scale 1:20Dimensions mm
Detail of marine foot:
ledoMnoitcennoC
edismmnisnoisnemiD fosriaP
sgelL A B C
MRT71tfelotthgir
0071 0751- - 2
MRT22 0022 0702
MRT72 0072 0752 0751 0001 3
MLT71thgirottfel
0071 0751- - 2
MLT22 0022 0702
MLT72 0072 0752 0751 0001 3
ledoM noitpircseDM937761 )mm091x004x092(92TlwobkniSM369861 gnirgnipparcsrebbuR5032364 skcar3roftinuediuG1088264 WDepytkcarrofhctiwsdnE544961 WDepytkcarrofetalpnoitcennoC10X1364 mm0072,0022,0071=LedilsyarT10X8364 mm0072,0022,0071=Letuhcyreltuc.wedilsyarT10X3364 mm0051,0001,005=LnoitcesedilsyarT1072364 etuhcyreltuchtiw005=LnoitcesedilsyarT1082364 elohgniparcshtiw005=LnoitcesedilsyarT
Left feed
Right feed
1. Water drain R 3/4”
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
10-103
Roller conveyors, stationary
DOC. NO. 10-103LEDITION 3 10.08
Some Electrolux dishwasher models can per-form to their full potential, if combined with theElectrolux Handling System range. The modu-lar system allows to design ergonomic and reli-able solutions to handle, transport and sortkitchenware, obtaining the most effective flow inthe dishwashing room. The wide range containscord conveyors for trays, manual, motorized anddishwasher driven sorting tables and a variety ofroller, slide and cord conveyors for baskets.
EASY TO INSTALL• ±50mm adjustable marine feet.• Units supplied as knock-down.• Connection to another rack conveyor or thedishwasher possible on the left or the right.• Thick welded flanges for sturdy connectionbetween the units.
• Provided with ”key holes” and ”snap on”system for fast and easy installation.• The drain can be turned 360°.• Self bearing undershelf eliminates the need foradditional frames.
EASY TO USE• Manual rack movement with short rollers.• Designed for 500x500mm dishwashing bas-kets.• Can be equipped with useful accessories likean end-limit switch, guides for racks and undershelves.• Improved end limit switch for better cleanibil-ity and reliability.
EASY TO CLEAN• Smooth surfaces with polished finish.
• All corners in the bottom of the basin arerounded.• The sloping bottom of the basin grants asmooth and rapid drainage.
EASY TO MAINTAIN• Basin constructed in AISI 304 1,2mm stainlesssteel.• Two AISI 30 square 40x40mm tubular legs asstandard.
EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.• Developed and produced in ISO 9001 certifiedfactory.For further specification and optional extras,please see overleaf.
Model 865 004S
Subject to changes without notice.
ROLLER CONVEYORS, STATIONARY Scale 1:20Dimensions mm
10-103
ledoM noitpircseD
220568320568
etalpdnEsroyevnocrellortrohsrofhctiwstimiL
520568620568720568820568
mm0011royevnocyranoitats,dnatspu+flehSmm0061royevnocyranoitats,dnatspu+flehSmm0012royevnocyranoitats,dnatspu+flehSmm0062royevnocyranoitats,dnatspu+flehS
920568030568130568230568
0011=L,steksab4rofkcarediuG0061=L,steksab8rofkcarediuG0012=L,steksab21rofkcarediuG0062=L,steksab61rofkcarediuG
040568140568
epytkcarroftekcarbnoitcennocflehShsaw-erp006htiwepytkcarroftekcarbnoitcennocflehS
261568 WDepytkcarroftikpotsycnegremE
361568461568
edistfelrof,trohs56TW/55TWetalpnoitcennoCedisthgirdnatnorfrof,gnol56TW/55TWetalpnoitcennoC
)wolebgniwarddnaotohpees(
l
875±50910±50
310±30
L
530620
1
2
610
576
1. Drain, turnable 360°, R 1 1/2"R2. Marine fot, see below
Optional extras
Detail of marine fot:
Ø 47
Ø 60
Ø9 (3X)
ledoM L lgkthgieW
ten
S300568 0011 055 31
S400568 0061 008 81
S500568 0012 0501 32
S600568 0062 0031 92
Dimensions mm
573
875910
323
300
Model 865 164
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
10-104
Roller conveyors, mobile
Electrolux dishwasher combined with the Elec-trolux Handling System range can perform totheir full potential.The modular system allowsto design ergonomic and reliable solutions tohandle, transport and sort galleyware, obtainingthe most effective flow in the dishwashing room.The wide range contains cord conveyors fortrays, manual, motorized and dishwasher drivensorting tables and a variety of roller, slide andcord conveyors for baskets.
EASY TO INSTALL• ±50mm adjustable feet.• Supplied as knock-down.• Intended for connection after a 180° dishwash-er driven curve.• Connection of end-limit switch to the dish-
DOC. NO. 10-104LEDITION 3 10.08
Model 865 013
washer.• End limit switch and end plate included in theunit.
EASY TO CLEAN• Smooth surfaces with polished finish.• Rounded corners in the bottom of the basin.• Easy to remove plastic rollers.• The sloping bottom of the basin leads theoverflow to a connected dishwasher curve.
EASY TO USE• Manual rack movement with short rollers.• Designed for 500x500 mm dishwashing bas-kets.• Swivel type 125 mm castors, of which 2 withbrakes.
• “Click-in” connection to the dishwasher curve.• Can be equipped with useful accessories likeguides for racks and plain shelves.
EASY TO MAINTAIN• Basin constructed in AISI 304 1.2 mm stainlesssteel.• AISI 304 feet and square 40x40 mm tubularlegs.
EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.• Developed and produced in ISO 9001 certifiedfactory.For further specification and optional extras,please see overleaf.
Subject to changes without notice.
ROLLER CONVEYORS, MOBILEScale 1:20Dimensions mm
10-104
Optional extras
875±50
530 620
45
155110
910±50
610
576
L
A
1
1 2 3
4
ledoM noitpircseD
220568920568030568130568230568
etalpdnE0011=L,steksab4rofkcarediuG
0061=L,steksab8rofkcarediuG0012=L,steksab21rofkcarediuG0062=L,steksab61rofkcarediuG
330568430568530568630568361568461568
mm5411royevnocrofdnatspu+flehSmm5461royevnocrofdnatspu+flehSmm5412royevnocrofdnatspu+flehSmm5462royevnocrofdnatspu+flehS
edistfelrof,trohs56TW/55TWetalpnoitcennoCedisthgirdnatnorfrof,gnol56TW/55TWetalpnoitcennoC
)wolebgniwarddnaotohpees(
Ø 47
Ø 60
Ø9 (3X)
Detail of marine fot:
1. Docking device "CLICK IN"2. End limit switch - optional extra
- to be placed on optional side.3. End plate - optional extra4. Drain, Ø32 mm
Dimensions mm
ledoM LgkthgieW
ten
210568 5411 03
310568 5461 53
410568 5412 04
510568 5462 64
573
875910
323
300
Model 865 164
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
10-105
Roller conveyor 90°, stationary
DOC. NO. 10-105LEDITION 2 10.08
Some Electrolux dishwasher models can per-form to their full potential, if combined with theElectrolux Handling System range. The modu-lar system allows to design ergonomic and reli-able solutions to handle, transport and sortgalleyware, obtaining the most effective flow inthe dishwashing room. The wide range containscord conveyors for trays, manual, motorized anddishwasher driven sorting tables and a variety ofroller, slide and cord conveyors for baskets.
EASY TO INSTALL• ±50mm adjustable marine feet.• Units supplied as knock-down.• Connection to another rack conveyor or thedishwasher possible on the left or the right.• Thick welded flanges for sturdy connectionbetween the units.
• Provided with ”key holes” and ”snap on”system for fast and easy installation.• The drain can be turned 360°.
EASY TO USE• Manual rack movement with short rollers.• Designed for 500x500mm dishwashing bas-kets.• Can be equipped with useful accessories likean end-limit switch, guides for racks and undershelves.• Improved end limit switch for better clean-ability and reliability.
EASY TO CLEAN• Smooth surfaces with polished finish.• All corners in the bottom of the basin arerounded.
• The sloping bottom of the basin grants asmooth and rapid drainage.
EASY TO MAINTAIN• Basin constructed in AISI 304 1,2mm stainlesssteel.• Two AISI 304 square 40x40mm tubular standsas standard; one fixed in the middle and onemovable depending on the location of the con-veyor.
EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.• Developed and produced in ISO 9001 certifiedfactory.For further specification and optional extras,please see overleaf.
Model 865 011S
Subject to changes without notice.
639
610
945
1545
1545
530
530
910±50875±50
2
1
ROLLER CONVEYOR , STATIONARY
Dimensions mm
10-105
ledoM noitpircseD
261568361568461568
rehsawhsidepytkcarroftikpotsycnegremEtfel-epytdoohotgnildnah-etalpnoitcennoC
thgir/tnorf-epytdoohotgnildnah-etalpnoitcennoC)wolebgniwarddnaotohpees(
1. Drain, turnable 360°, R 1 1/2"R2. Marine fot, see beside
Optional extras
Detail of marine fot:
Ø 47
Ø 60
Ø9 (3X)
Model 865 011S
573
875910
323
300
Model 865 164
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Slide conveyors, deep basin
10-106DOC. NO. 10-006LEDITION 4 10.08
Some Electrolux dishwasher models can performto their full potential, if combined with theElectrolux Handling System range. The modularsystem allows to design ergonomic and reliablesolutions to handle, transport and sort kitchen-ware, obtaining the most effective flow in thedishwashing room. The wide range contains cordconveyors for trays, manual, motorized and dish-washer driven sorting tables and a variety ofroller, slide and cord conveyors for baskets.
EASY TO INSTALL• ±50mm adjustable marine feet.• Supplied as knock-down.• Connection to another rack conveyor orthe dishwasher on the left or the right.• Provided with “key holes” and “snap-on”system for fast and easy installation.
• Thick welded flanges for sturdy connectionbetween the units.• Self bearing undershelf eliminates the needfor additional frames.
EASY TO USE• Manual rack movement on slide rails.• Designed for 500x500 mm dishwashingbaskets.• Models without/with integrated splashguard.• Stainless steel strainer.
EASY TO CLEAN• All surfaces are smooth with polished finish.• All corners in the bottom of the basin arerounded.• Slide rails are bent into the profile of the
conveyor.• The sloping bottom of the basin grants asmooth and rapid drainage.• Include stainless steel waste bucket.
EASY TO MAINTAIN• Basin constructed in AISI 304 1,2 mmstainless steel.• Two AISI 304 square 40x40mm tubular legsas standard.
EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.• Developed and produced in ISO 9001 certifiedfactory.For further specification and optional extras,please see overleaf.
Model 865 017S Model 865 021S
Subject to changes without notice.
10-106
SLIDE CONVEYORS, WITH DEEP BASIN
Dimensions mmOptional extras
Detail of marine foot
ledoM draughsalpS L lthgieW
gk
S610568 -008 004
71S910568 x 52S710568 -
0011 05512
S020568 x 92
S810568 -0061 008
92
S120568 x 93
Scale 1:20Dimensions mm
Ø 47
Ø 60
Ø9 (3X)
ledoM noitpircseD
220568 etalpdnE
730568 sroyevnocnisabrofevlavffo-tuhS
830568 )draughsalpshtiwsroyevnoc(rewohs,pat,rexim,tinuyarpsesnir-erP
930568 )draughsalpshtiwsroyevnoc(,reximomreht.motua,tinuyarpsesnir-erP
261568 WDepytkcarroftikpotsycnegremE
661568 mm0011=LroyevnocrofflehsdirG
761568 mm0061=LroyevnocrofflehsdirG
361568 edistfelrof,trohs56TW/55TWetalpnoitcennoC
461568 edisthgirdnatnorfrof,gnol56TW/55TWetalpnoitcennoC)wolebgniwarddnaotohpees(
440
464
300
875±50910±50
1371±50
530 620767
L
l
1
33
3 310±30
576
434
2
1. Drain R 1 1/2"M2. Marine foot3. Splash guard, models 865 019/020/021 only
573
875910
323
300
Model 865 164
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
10-107DOC. NO. 10-107LEDITION 1 07.08
Model 865 043S
Side loader, driven by dishwasher
Some Electrolux dishwasher models can per-form to their full potential, if combined with theElectrolux Handling System range. The modu-lar system allows to design ergonomic and reli-able solutions to handle, transport and sortgalleyware, obtaining the most effective flow inthe dishwashing room. The wide range containscord conveyors for trays, manual, motorized anddishwasher driven sorting tables and a variety ofroller, slide and cord conveyors for baskets.
EASY TO INSTALL• ±50mm adjustable foot.• The side loader intended for installation be-tween a dishwasher and a rack conveyor (rolleror slide conveyor) or manual sorting table.• Thick welded flanges for sturdy connection
between the units.• Provided with “key holes” and “snap on”system for fast and easy installation.• Two legs with marine feet included as standard.• Upon request the side loader is available up to2 m long.
EASY TO USE• Side loader is driven by the dishwasher.• Designed for 500x500 mm dishwashing bas-kets.• Racks are automatically fed into the dishwash-er, when they are forwarded from the conveyor.
EASY TO CLEAN• All surfaces are smooth with polished finish.• All corners in the bottom of the basin are
rounded.• The sloping bottom of the basin leads theoverflow to the connected dishwasher.
EASY TO MAINTAIN• Basin constructed in AISI 304 1,2 mm stainlesssteel.• AISI 304 feet and square 40x40 mm tubular leg.
EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.• Developed and produced in ISO 9001 certifiedfactory.For further specification and optional extras,please see overleaf.
Subject to changes without notice.
SIDE LOADERScale 1:20Dimensions mm
10-107
Specification
Installation:To be connected to conveyor and the feeding side of dishwasher. Therefore the two adjustable feet need no special fastening arrangement as the legsjust have supporting function between these units.
ledoMsgkthgieW gnippihS
³memulovten ssorg
S340568 8 01 004.0
530 506
576
910±50
506 610
863±50
610
1
21. Feeding bars2. Hook for racks
Detail of marine fot:
Ø 47
Ø 60
Ø9 (3X)
Optional extras
ledoM noitpircseD
261568 WDepytkcarroftikpotsycnegremE
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
10-121
Manual sorting tables
DOC. NO. 10-121LEDITION 2 07.08
Some Electrolux dishwasher models can perform totheir full potential, if combined with the ElectroluxHandling System range. The modular system allowsto design ergonomic and reliable solutions to handle,transport and sort galleyware, obtaining the mosteffective flow in the dishwashing room. The widerange contains cord conveyors for trays, manual,motorized and dishwasher driven sorting tables anda variety of roller, slide and cord conveyors forbaskets.EASY TO INSTALL• ±50mm adjustable marine feet.• Designed to be connected to a rack conveyor.• Connection from the side.• Thick welded flanges for sturdy connection betweenthe units.• Provided with ”key holes” and ”snap on” system forfast and easy installation.EASY TO USE• Manual receiving and sorting operations.
• Manual racks handling, made easier thanks tothe long rollers.• Designed for 500x500mm dishwashing baskets.• Can be equipped with useful accessories like trayslides, a single adjustable over-shelf for emptyingand storing baskets, a double adjustable over shelffor sorting of baskets and for empty baskets or factoryfitted options like strike spray guns, under shelves,cutlery soaking basin and basin wash nozzles.• Improved end limit switch for better cleanabilityand reliability.• Double stainless steel strainer basket for easyoperation.• Double filter strainer can be installed on bothsides allowing access from both directions.• Stacking tables for 7 and 8 baskets availableupon request.EASY TO CLEAN• Smooth surfaces with polished finish.• Double bent profile to eliminate sharp edges.
• All corners in the bottom of the basin are rounded.• The sloping bottom of the basin grants a smoothand rapid drainage.• The rollers and strainer box are easy to remove.• The worktop for racks is inclined towards thebasin.• Basin wash nozzles for cleaning the basin areavailable as optional extra.• Strainer baskets are easy to remove.EASY TO MAINTAIN• Constructed in AISI 304 stainless steel with square40x40mm tubular construction, legs and feet.EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.• Developed and produced in ISO 9001 certifiedfactory.For further specification and optional extras, pleasesee overleaf.
Model 865091S
MANUAL SORTING TABLES Dimensions mm
12
+0-60
910±50
610
341
875±50
530
204±30
1110
550
A
1 2
+0-60
910±50
610
341
875±50
530
204±30
1110
550
A
Model 865087S
1. Drain, turnable 360°, R 1 1/2"R2. Marine fot, see below
Model 865091S
1. Drain, turnable 360°, R 1 1/2"R2. Marine fot, see below
ledoM noitpircseD ledomelbatgitrosrof
490568 mm0261=LelbatgnitrosrofflehsrevoelbuoD S090568,S680568
590568 mm0312=LelbatgnitrosrofflehsrevoelbuoD S190568,S780568
690568 mm0462=LelbatgnitrosrofflehsrevoelbuoD S290568,S880568
790568 mm0513=LelbatgnitrosrofflehsrevoelbuoD S390568,S980568
890568 mm0261=LelbatgnitrosrofflehsrevO S090568,S680568
990568 mm0312=LelbatgnitrosroflehsrevO S190568,S780568
001568 mm0462=LelbatgnitrosroflehsrevO S290568,S880568
101568 mm0513=LelbatgnitrosroflehsrevO S390568,S980568
201568 mm0261=LelbatgnitrosrofedilsyarT S090568,S680568
301568 mm0312=LelbatgnitrosrofedilsyarT S190568,S780568
401568 mm0462=LelbatgnitrosrofedilsyarT S290568,S880568
501568 mm0513=LelbatgnitrosrofedilsyarT S390568,S980568
601568 kcaryreltucrofecivedtfil+nisabgnikaoS
sledomlla
701568 mm0081tinuyarpshsaw-erpelbatcarteR
801568 mm0006tinuyarpshsaw-erpelbatcarteR
011568 mm005,gnirrebbur+noitatsetsawelgniS
111568 mm008,sgnirrebbur2+noitatsetsawelbuoD
311568 selbatgnitrosrofmetsysgnihsawnisaB
411568 retawderepmetrofrexiM
261568 rehsawhsidepytkcarroftikpotsycnegremE
Optional extras
Detail of marine fot:
Ø 47
Ø 60
Ø9 (3X)
ledoMtemevomteksab
)edisssertiawmorf(Anoisnemid
mmthgiew
ten
S680568 hgirottfel0261 001
S090568 tfelotthgir
S780568 thgirottfel0312 021
S190568 tfelotthgir
S880568 thgirottfel0462 041
S290568 tfelotthgir
S980568 thgirottfel0513 061
S390568 tfelotthgir
MANUAL SORTING TABLES
Specification
Subject to changes without notice.
10-121
MANUAL SORTING TABLES
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Loading table
10-331
Model 700 16Swith optional grid shelf
Manufactured in two versions; for loadingfrom left or right, and in three lengths, 1200,1600 or 2100 mm.The loading table is of the same type, regard-less of whether the dishwasher is positionedfor straight or right angle loading.
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY TO CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
The 2100 mm table has a BD-55 sink witha 1.5 l strainer bucket and two slide bars.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide acomplete welded, very rigid construction.Wall fixing security brackets are included asstandard.The frame is fitted with adjustable feet and onfree standing tables floor mounting bracketsare are available to permanently locate thetable.A wide range of optional extras is available tomeet most individual requirements.For further specifications and optional extras,please see overleaf and leaflet 10-399.
DOC. NO. 10-331LEDITION 4 06.11
The table top is made of 1.2 mm stainless steelSS 2333 (AISI 304) with a 60 mm raised rearedge and rounded 15 mm beaded edge with52 mm turned down edge along front andone end. The loading end is shaped forconnection to the dishwasher.The table top is alternatively also available in2.2 mm Duoplan version, which is achievedby joining 2 layers of stainless steel sheettogether under heat and pressure with aspecial glue. This leads to a very sturdy highimpact resistant top with sound-deadeningproperties.The sink bowls are equipped with 1/12“waste and 1“ overflow. 1200 and 1600 mmlong tables have a BE-55 sink (550x500x240mm) with 1.5l strainer bucket and slide bar.
Subject to changes without notice.
60 A 580 28
305
900
L
650
+25-40
+25-40
240
340
125
505
20
2
1
3
5
60
X
X
LOADING TABLE
10-331
Specification:
Optinal extras – see leaflet 10-399
1. Drain R 1½" M.2. Overflow R 1" M.3. Strainer bucket 1.5 l4. Strainer5. Slide bar
Model 700 12S/700 16S/801 12S/801 16S
Scale 1:20Dimensions mm
Model 700 21S/801 21S
Model 702 12S/702 16S/803 12S/803 16S Model 702 21S/803 21S
Detail of marine foot:
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLAN table top is con-structed of 2 layers of stainless steel sheet bondedtogether to form a very strong and hygienic surfacewith very good sound-deadening properties.
570
570
800800
800 800
4 3
mmthgnelelbaTehtfoedisthgirehtnonoitcennocroF
elbatehtfoedistfelehtnonoitcennocroF
elbat foriaPsgel
L A pots/ss/s
potNALP-OUDpots/s
s/spotNALP-OUD
0021 048 S21007 S21108 S21207 S21308
20061 0421 S61007 S61108 S61207 S61308
0012 0461 S12007 S12108 S12207 S12308
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Unloading table
10-333
Model 705 16S
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY TO CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
Manufactured in two versions; for unloadingfrom left or right, and in three lengths, 1200,1600 or 2100 mm.The unloading table is of the same type,regardless of whether the dishwasher is posi-tioned for straight or right angle loading.The table top is made of 1.2 mm stainless steelSS 2333 (AISI 304) with a 60 mm raised rearedge and rounded 15 mm beaded edge with52 mm turned down edge along front andone end. The loading end is shaped forconnection to the dishwasher.The table top is alternatively also available in2.2 mm Duoplan version, which is achievedby joining 2 layers of stainless steel sheettogether under heat and pressure with a
special glue. This leads to a very sturdy highimpact resistant top with sound-deadeningproperties.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide acomplete welded, very rigid construction.Wall fixing security brackets are included asstandard. The frame is fitted with adjustablefeet and on free standing tables floor mount-ing brackets are are available to permanentlylocate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications and optional extras,please see overleaf and leaflet 10-399.
DOC. NO. 10-333LEDITION 5 06.11
Subject to changes without notice.
UNLOADING TABLEScale 1:20Dimensions mm
10-333
Specification
Model 707 12S
Optional extras – see leaflet 10-399
Detail of marine foot:
SECTION X-X
Standard top
DUOPLAN
The 2.5 mm thick DUOPLAN table top is cons-tructed of 2 layers of stainless steel sheet bondedtogether to form a very strong and hygienic surfacewith very good sound-deadening properties.
60A 580 28
305
900
650505
+25-40
+25-40
125
20
60
X
XL
mmthgnelelbaTehtfoedisthgirehtnonoitcennocroF
elbatehtfoedistfelehtnonoitcennocroF
elbat foriaPsgel
L A pots/ss/s
potNALP-OUDpots/s
s/spotNALP-OUD
0021 048 S21507 S21608 S21707 S21808
20061 0421 S21507 S61608 S61707 S61808
0012 0461 S12507 S12608 S12707 S12808
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Loading/unloading tables, accessories
● ALL STAINLESS STEEL (AISI 304)
● RIGID CONSTRUCTION WITH40 MM SQUARE TUBULAR LEGS
● DEEP ANTI-DRIP EDGE PROFILES
● EASY TO INSTALL AND MAINTAIN
● EASY TO USE
● EASY TO CLEAN
● EASY ON THE ENVIRONMENT
● WIDE RANGE OF OPTIONALEXTRAS
10-336DOC. NO 10-336LEDITION 4 12.10
The loading and unloading tables are de-signed for direct connection to EHTM andEHTAIUSPH dishwashers. They are madeof 1.2 mm stainless steel (AISI 304).The carefully designed deep anti-drip pro-files are totally folded with a lower edge forsafe and easy cleaning. Loading tables areequipped with a pre-wash sink bowl withdimension 500x400x300 mm. The sink isequipped with a standard waste outlet and abox strainer with plastic bucket.Pre-wash sinks are pressed in one piece andfitted with a 1 1/2" BSP drain and a 1" BSPoverflow.
As standard the tables are to be secured to thedishwasher and fitted with one pair of legs atthe other end. The feet can be adjusted±50mm to ensure the tables drain back intothe dishwasher.Solid alt. grid undershelves are available asoptional extras. Shut-off valve, mountingplate for pre-rinse unit and wall type pre-wash spray unit are available as optional extrasfor the loading table.For further specifications and optional extras,please see following pages.
DishwasherEHTAIUSPH
Model LU18M
Model PW12RMwith mounting plate BHS-A
and pre-rinse spray unit 16 80 77
L
±50910
60
600
1
2
3473.5
1. Connection to dishwasher, ready with holes2. Marine foot (see detail drawing)3. Glide profile
LOADING AND UNLOADING TABLES, ACCESSORIESScale 1:20Dimensions mm
±501210
60
300500
400
425
438.4
±50910
738,5 L
1
2
3
4
473.5
1. Connection to dishwasher, ready with holes2. Marine foot (see detail drawing)3. Overflow4. Water drain
UNLOADING TABLE
LOADING TABLE
UNLOADING TABLES – Specification/dimensions mm
ledoM LsgkthgieW gnippihS
³memulovten ssorg
M6UL 006 8 01 070.0
M21UL 0021 11 31 011.0
M61UL 0061 31 61 031.0
M81UL 0081 61 02 051.0
ledoMtnemevomteksaB
LsgkthgieW gnippihS
³memulovtfelotthgir thgirottfel ten ssorg
MR21WP X -0021 33 53 067.0
ML21WP - XMR61WP X
0061 73 04 041.1ML61WP - XMR81WP X -
0081 14 54 082.1ML81WP - X
LOADING TABLES – Specification/dimensions mm
LOADING AND UNLOADING TABLES, ACCESSORIES
Detail of marine foot:
A A50
3
30
17.5 3165
40
Ø 11
ledoM LsgkthgieW gnippihS
³memulovten ssorg
8LI 008 8 9 070.0
Specification/dimensions mm
1000
778.5738.5
300 500
400
60
300
425
438.5
1
2
800
600640
60
INTERMEDIARY LOADING TABLE
ledoMtnemevomteksaB
LsgkthgieW gnippihS
³memulovtfelotthgir thgirottfel ten ssorg
R01WPI X -0001 81 02 007.0
L01WPI - X
Specification/dimensions mm
1. Overflow2. Water drain
Subject to changes without notice.
10-336
LOADING AND UNLOADING TABLES, ACCESSORIES
Model BHS-A ,Mounting plate for spray unit
Model 16 92 79,Shut-off valve
Optional extras
ledoM noitpircseD
972961M6SUM21SUM61SUM81SUM6UGM21UGM61UGM81UGA-SHB
770861
evlavffo-tuhSmm006elbatrofflehsrednudilosleetssselniatSmm0021elbatrofflehsrednudilosleetssselniatSmm0061elbatrofflehsrednudilosleetssselniatSmm0081elbatrofflehsrednudilosleetssselniatS
mm006elbatrofflehsrednudirgleetssselniatSmm0021elbatrofflehsrednudirgleetssselniatSmm0061elbatrofflehsrednudirgleetssselniatSmm0081elbatrofflehsrednudirgleetssselniatS
tinuesnir-erprofetalpgnitnuoMtinuyarpsesnir-erP
232
800
220
30
30
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Model 710 20S
DOC. NO. 10-351LEDITION 6 06.11
10-351
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
The table top is constructed of polished 1.2mm stainless steel. The top is on all sidesformed to a 15 mm anti-drip edge as shownoverleaf.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy, high impactresistant top with very good sound-deaden-ing properties.
The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on free stand-ing tables floor mounting brackets are avail-able to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specificationsand optional extras,please see overleaf and leaflet 10-399.
Tables
Subject to changes without notice.
TABLES
10-351
L
C A B C
+25
+25
-40
-40900
305
650
580 28
X
X
Scale 1:20Dimensions mm
Model 710 24S
Specification:
Detail of marine foot:
The 2.5 mm thick DUOPLAN table topis constructed of 2 layers of stainless steelsheet bonded together to form a verystrong and hygienic surface with very goodsound-deadening properties.
SECTION X-X
Standard top
DUOPLAN
ledoM mmsnoisnemiD
foriaPsgel
sgkthgieW
gnippihS³memulovmm5.1htiw
pots/s
mm5.2htiws/s
NALP-OUDpot
L A B C ten ssorg
S50017 S50317 005 044
-
03
2
41 51 003.0
S90017 S90317 009 048 32 52 054.0
S21017 S21317 0021 040108
33 63 027.0
S61017 S61317 0061 0441 54 84 569.0
S02017 S02317 0002 044
0441 06 3
55 06 002.1
S42017 S42317 0042 048 56 07 544.1
S82017 S82317 0082 0421 57 48 096.1
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables, plain top with rear edge
Model 714 12S/715 12S
DOC.NO. 10-356LEDITION 4 06.11
10-356
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning, thefront and side edges are formed to a 15 mmanti-drip edge.The table top is alternatively also available in2.2 mm Duoplan version, which is achievedby joining 2 layers of stainless steel sheettogether under heat and pressure with aspecial glue. This leads to a very sturdy highimpact resistant top with sound-deadeningproperties.
The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on free stand-ing tables floor mounting brackets are avail-able to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications and optional extras,please see overleaf and leaflet 10-399.
Subject to changes without notice.
TABLES, PLAIN TOP WITH REAR EDGE
10-356
Scale 1:20Dimensions mm
Specification
Model 715 24S
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLAN table topis constructed of 2 layers of stainless steelsheet bonded together to form a very strongand hygienic surface with very good sound-deadening properties.
ledoM mmsnoisnemiD
foriaPsgel
sgkthgieW
gnippihS³memulovmm5.1htiw
pots/s
mm5.2htiws/s
NALP-OUDpot
L A B C ten ssorg
S50517 S50417 005 044
-
03
2
51 71 003.0
S90517 S90417 009 048 42 62 054.0
S21517 S21417 0021 040108
43 73 027.0
S61517 S61417 0061 0441 74 05 569.0
S02517 S02417 0002 044
0441 06 3
75 16 002.1
S42517 S42417 0042 048 66 47 544.1
S82517 S82417 0082 0421 77 68 096.1
L
C A B C
+25
+25
-40
-40900
305
650
580 2842
25
X
X
A A50
3
30
17.5 3165
40
Ø 11
Detail of marine foot:
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
● ERGONOMIC DESIGN FOR IDEALWORKING HEIGHT FOR ALLSTAFF
● CONSTRUCTED ENTIRELY INSTAINLESS STEEL
● RIGID FRAME CONSTRUCTION
● STANDARD WITH HEAVY DUTYDUOPLAN TOP
● HYDRAULICALLY ADJUSTABLEBETWEEN 800 AND 1150 MM HIGH
● MANUAL OR ELECTRICOPERATION
The work table is manufactured from (AISI 304)polished stainless steel. The sturdy welded frame-work is constructed from 40 mm square tubing.The unit has the top mounted directly onto theunder frame with an intermediate U-shapedsupporting brace.The top consists of a 2.2 mm thick heavy dutyDUOPLAN work table top with good sounddeadening properties. The rear edge is turned up60 mm with a safe returned edge and the threeother sides are formed to a 15 mm anti-drip edgeas shown overleaf.The tables are provided with hydraulically ad-justable telescopic legs making it possible to
adjust the height between 800-1150 mm mak-ing the unit especially suitable for use withpreparation machinery such as slicers, foodprocessors, etc. The table has no front crossbeam, which gives the possibility to work sittingdown or standing up. It can be adjusted to theideal ergonomic height for all kinds of foodservice work.If the table is supplied with undershelves andunderbuilt cupboards or similar it is providedwith front cross beam.For further specifications and optional extras,please see overleaf and leaflet 10-399.
10-358DOC. NO. 10-358LEDITION 4 06.11
Table with adjustable height
Model 97 68 07
Subject to changes without notice.
10-358
Scale 1:20Dimensions mm
Manually operated height adjustable worktable
Motor operated height adjustable worktable *
1. Hydraulic pump2. Foldable crank
1. Electrical cord with plug2. Push buttons, and3. Motor, voltage 230 1~50/60, loading 0.2 kW
Model Model Dimensions mm Pairs oflegs
Weight kgs Shippingvolume
m³manual motor operated L A B C net gross
97 68 05S 97 71 01S 800 640
- 80 2
41 42 0.500
97 68 06S 97 71 02S 1200 1040 50 51 0.700
97 68 07S 97 71 03S 1600 1440 59 60 1.000
97 68 08S 97 71 04S 2000 1840 68 69 1.300
97 71 09S 97 71 05S 2200 840
124060 3
78 79 1.400
97 71 10S 97 71 06S 2400 1040 83 84 1.500
97 71 11S 97 71 07S 26001240
88 89 1.700
97 71 12S 97 71 08S 2800 1440 93 94 1.800
TABLE WITH ADJUSTABLE HEIGHT
Specification
Ø5.5 (3x)
3930
M 10
4
Ø40
Ø50
Detail of marine foot:
➔
➔
*When fitting with different equipment below the table top, consider the location and size of the motor.
Section, table top:
The 2.2 mm thick DUOPLAN table topis constructed of 2 layers of stainless steelsheet bonded together to form a very strongand hygienic surface with very good sound-deadening properties.
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Model 721 16S/724 16S
Tables with single sink, bowl T29
10-361
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
DOC. NO. 10-361LEDITION 7 06.11
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed o a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with good sound-deadening proper-ties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and 1" over-flow.
The corners are coved, for easy cleaning.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction.Wall fixing security brackets are included asstandard. The frame is fitted with adjustablefeet and on free standing tables floor mount-ing brackets are available to permanentlylocate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
Subject to changes without notice.
1
L
C A B C
60
+25
+25
-40
-40
160
900
305
290
650
580
400
290
L 2
X
X
370 370
2842
10-361
Model 720 24S / 725 24 Model 722 24S / 727 24Model 721 24S / 726 24
Model 721 24
1. Drain 1½ "
Specification
Dimensions mm
TABLES WITH SINGLE SINK, 290X400X160 MM Scale 1:20Dimensions in mm
*
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLANtable top is constructed of 2 layersof stainless steel sheet bonded to-gether to form a very strong andhygienic surface with very goodsound-deadening properties.
elbaTmmthgnel
s/smm5.1htiwselbatrofrebmunledoMpot
htiwselbatrofrebmunledoMpotNALPOUDs/smm5.2
sgkthgieWgnippihS
emulov³m
LehtotlwoB
tfelehtnilwoB
elddimehtotlwoB
thgirehtotlwoB
tfelehtnilwoB
elddimehtotlwoB
thgirten ssorg
005-
S50127- -
S50427-
41 61 003.0
009 S90127 S90427 52 72 054.0
0021 S21027 S21127 S21227 S21327 S21427 S21827 63 93 027.0
0061 S61027 S61127 S61227 S61327 S61427 S61827 64 84 569.0
0002 S02027 S02127 S02227 S02327 S02427 S02827 55 85 002.1
0042 S42027 S42127 S42227 S42327 S42427 S42827 76 96 544.1
0082 S82027 S82127 S82227 S82327 S82427 S82827 67 97 096.1
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
005-
--
044
-03 -
-
-
2009 048
0021 040108
040108
040108
0061 0441 0441 0441
0002048
0401
06
044
0441 06
0401048
06 300420441
0480441
0082 0421 0421 0421
Detail of marine foot:
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables with double sink, bowls BE 50+T29
10-366DOC. NO. 10-366LEDITION 6 05.10
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
Model 731 16S/734 16S
The corners are coved, for easy cleaning.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame is fitted with adjustable feet andon freestanding tables floor mounting brack-ets are available to permanently locate thetable.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with good sound-deadening proper-ties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and overflow.
Subject to changes without notice.
1 12
L
C A B C
60
+25
+25
-40
-40
200160
900
305
290
650
580
400
290 40
L 2
X
X
535
225 225
745
500
390
2842
10-366
TABLES WITH DOUBLE SINK, BE 50 500X400X200 MM, T 29 290X400X160 MM
Dimensions mm
Model 730 24S /733 24S
Scale 1:20Dimensions mmModel 731 24S /734 24S
Model 731 24S /734 24S Model 732 24S /738 24S
Specification
1. Drain R 1 1/2" M2. Overflow for hose, Ø 24,5 mm, inner
Detail of marine foot:
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLANtable top is constructed of 2 layersof stainless steel sheet bonded to-gether to form a very strong andhygienic surface with very goodsound-deadening properties.
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
0061 0441 - 08 0441 08 0441 - 08 2
0002
0441
044
06
048 0401
06
044
0441 06 30042 048 0401 0421 048
0082 0421 0421 0441 0421
thgnelelbaTmm
pots/smm5.1htiwselbatrofrebmunledoMhtiwselbatrofrebmunledoM
potNALPOUDs/smm5.2sgkthgieW gnippihS
emulov³mL
ehtotlwoBtfel
ehtnilwoBelddim
ehtotlwoBthgir
ehtotlwoBtfel
ehtnilwoBelddim
ehtotlwoBthgir
ten ssorg
0061 S61037 S61137 S61237 S61337 S61437 S61837 74 84 0.1
0002 S02037 S02137 S02237 S02337 S02437 S02837 65 85 3.1
0042 S42037 S42137 S42237 S42337 S42437 S42837 86 07 5.1
0082 S82037 S82137 S82237 S82337 S82437 S82837 77 08 8.1
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
10-371
Tables with single sink, bowl BE50
Model 741 16S/744 16S
DOC. NO. 10-371LEDITION 5 06.11
● STAINLESS STEEL (AISI304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
The corners are coved, for easy cleaning.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on free stand-ing tables floor mounting brackets are avail-able to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand leaflet 10-399.
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with good sound-deadening proper-ties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and overflow.
Subject to changes without notice.
1 12
L
C A B C
60
+25
+25
-40
-40
200
900
305
650
580
X
X
475
500
390
2842
475L/2
10-371
TABLES WITH SINGLE SINK BE 50, 500X400X200 MM
1. Drain 1 1/2"2. Overflow for hose Ø 24 mm, inner
Dimensions in mm
Scale 1:20Dimensions mm
Model 741 24S
Model 740 24S / 743 24S Model 741 24S / 744 24S
Model 742 24S / 748 24S
Specification
Detail of marine foot:
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLAN table top isconstructed of 2 layers of stainless steel sheetbonded together to form a very strong andhygienic surface with very good sound-deadening properties.
elbaTmmthgnel
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
0021 0401- 08
0401- 08
0401- 08 2
0061
0441
0441 0441
0002 044
06
0440441
06
044
0441 06 30042 048 048 048
0082 0421 049 0471 0421
thgnelelbaTmm
pots/smm5.1htiwselbatrofrebmunledoMhtiwselbatrofrebmunledoM
potNALPOUDs/smm5.2
L tfelehtotlwoBehtnilwoB
elddimehtotlwoB
thgirtfelehtotlwoB
ehtnilwoBelddim
ehtotlwoBthgir
0021 S21047 S21147 S21247 S21347 S21447 S21847
0061 S61047 S61147 S61247 S61347 S61447 S61847
0002 S02047 S02147 S02247 S02347 S02447 S02847
0042 S42047 S42147 S42247 S42347 S42447 S42847
0082 S82047 S82147 S82247 S82347 S82447 S82847
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables with double sink, bowl BD 50
Model 751 20S/754 20S
10-376DOC. NO. 10-376LEDITION 5 06.11
● STAINLESS STEEL (AISI304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
The corners are coved, for easy cleaning.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on freestand-ing tables floor mounting brackets are avail-able to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with good sound-deadening proper-ties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and overflow.
Subject to changes without notice.
1 2
L
C A B C
60
200
390
650400
L 2
X
X
475475 520 520 520
500
+25
+25
-40
-40900
305
580 2842
10-376
TABLES WITH DOUBLE SINK BD 50, 500X400X200 MM Scale 1:20Dimensions mm
Model 750 24S /755 24S
1. Drain 1 1/2"2. Overflow for hose Ø 24 mm, inner
Model 751 24S /754 24S Model 752 24S /758 24S
Model 751 24S /754 24S
Dimensions mm
Specification
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLAN tabletop is constructed of 2 layers ofstainless steel sheet bonded together toform a very strong and hygienic sur-face with very good sound-deadeningproperties.
thgnelelbaTmm
pots/smm5.1htiwselbatrofrebmunledoMhtiwselbatrofrebmunledoM
potNALPOUDs/smm5.2sgkthgieW gnippihS
emulov³mL
ehtotlwoBtfel
ehtnilwoBelddim
ehtotlwoBthgir
ehtotlwoBtfel
ehtnilwoBelddim
ehtotlwoBthgir
ten ssorg
0061 - S61157 - - S61457 - 74 84 0.1
0002 S02057 S02157 S02257 S02357 S02457 S02857 65 85 3.1
0042 S42057 S42157 S42257 S42357 S42457 S42857 86 07 5.1
0082 S82057 S82157 S82257 S82357 S82457 S82857 77 08 8.1
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoBsgelforiaP
L A B C A B C A B C
0061 0441 - 08 0441 08 0441 - 08 2
0002
0441
044
06
0401 048
06
044
0441 06 30042 048 0421 0401 048
0082 0421 0441 0421 0421
Detail of marine foot:
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables with single sink, bowl BE 55
DOC. NO. 10-381LEDITION 4 06.11
Model 761 16S
10-381
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with good sound-deadening proper-ties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and overflow.
The corners are coved, for easy cleaning. Theframe work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on free stand-ing tables floor mounting brackets are avail-able to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
Subject to changes without notice.
12
L
C A B C
60
240
340
650500
L 2
X
X550
500500
+25
+25
-40
-40900
305
580 2842
10-381
TABLES WITH SINGLE SINK BE 55, 550X500X240 MM Scale 1:20Dimensions in mm
Model 761 24
Model 760 24 / 763 24 Model 761 24 / 764 24 Model 762 24 / 768 24
Specification
Dimensions mm
1. Drain 1 1/2"2. Overflow for hose Ø 24 mm, inner
Detail of marine foot:
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLANtable top is constructed of 2 layersof stainless steel sheet bondedtogether to form a very strong andhygienic surface with very goodsound-deadening properties.
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
0021 0401- 08
0401- 08
0401- 08 2
0061
0441
0441 0441
0002 044
06
0440441
06
044
0441 06 30042 048 048 048
0082 0421 049 0471 0421
thgnelelbaTmm
pots/smm5.1htiwselbatrofrebmunledoMhtiwselbatrofrebmunledoM
potNALPOUDs/smm5.2sgkthgieW gnippihS
emulov³mL
ehtotlwoBtfel
ehtnilwoBelddim
ehtotlwoBthgir
ehtotlwoBtfel
ehtnilwoBelddim
ehtotlwoBthgir
ten ssorg
0021 S21067 S21167 S21267 S21367 S21467 S21867 83 24 007.0
0061 S61067 S61167 S61267 S61367 S61467 S61867 25 65 000.1
0002 S02067 S02167 S02267 S02367 S02467 S02867 56 07 002.1
0042 S42067 S42167 S42267 S42367 S42467 S42867 77 48 005.1
0082 S82067 S82167 S82267 S82367 S82467 S82867 09 89 008.1
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables with double sink, bowl BD 55
10-386DOC. NO. 10-386LEDITION 4 06.11
Model 771 20S/774 20S
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with good sound-deadening proper-ties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and overflow.
The corners are coved, for easy cleanining.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard.The frame is fitted with adjustable feet and onfree- standing tables floor mounting bracketsare available to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
Subject to changes without notice.
Model 771 24S/774 24S
Scale 1:20Dimensions mm
Model 772 24S/778 24S
Model 771 24S/774 24S
Model 770 24S/773 24S
1. Drain 1 1/2"2. Overflow for hose, Ø 24,5 mm, inner
Dimensions mm
10-386
Tablelength mm
L
Model number for tables with 1.5 mmstainless steel top
Model number for tables with 2.5 mmstainless steel top type DUOPLAN
Weight kgs Shippinvolume
m³bowls tothe left
bowls in themiddle
bowls to theright
bowls to theleft
bowls in themiddle
bowls to theright
net gross
1600 - 771 16S - - 774 16S - 49 56 1.000
2000 770 20S 771 20S 772 20S 773 20S 774 20S 778 20S 64 70 1.200
2400 770 24S 771 24S 772 24S 773 24S 774 24S 778 24S 77 84 1.500
2800 770 28S 771 28S 772 28S 773 28S 774 28S 778 28S 90 98 1.700
TABLES WITH DOUBLE SINK BD 55, 550X500X240 MM
Specification
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLAN table topis constructed of 2 layers of stainless steelsheet bonded together to form a verystrong and hygienic surface with verygood sound-deadening properties.
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
0061 - - - 0441 08 - - - 2
0002
0441
044
06
0401 048
06
044
0441 06 30042 048 0421 0401 048
0082 0421 0441 0421 0421
1 2
L
C A B C
60
240
340
650500
L 2
X
X550
500570500 570570
42
+25
+25
-40
-40900
305
580 28
Detail of marine foot:
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables with single sink, bowl BE 70
10-388DOC. NO. 10-388LEDITION 4 06.11
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
Model 811 16/814 16
The corners are coved for easy cleaning.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on free stand-ing tables floor mounting brackets are areavailable to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is alternatively also available in2.2 mm Duoplan version, which is achievedby joining 2 layers of stainless steel sheettogether under heat and pressure with aspecial glue. This leads to a very sturdy highimpact resistant top with sound-deadeningproperties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and overflow.
Subject to changes without notice.
1 2
L
C A B C
60
+25
+25
-40
-40
240
305
370
650
580
440
L 2
X
X700
900
575 575
2842
10-388
Scale 1:20Dimensions in mm
TABLES WITH SINGLE SINK BE 70, 700X440X240 MM
1. Drain 1 1/2"2. Overflow for hose Ø 24 mm, inner
Model 811 24S
Model 811 24S / 814 24S Model 812 24S / 818 24SModel 810 24S / 813 24S
Dimensions in mm
Specification
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLAN tabletop is constructed of 2 layers of stainlesssteel sheet bonded together to form avery strong and hygienic surface withvery good sound-deadening proper-ties.
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
0021 --
- 0401- 08
--
-2
0061
0441
08 0441 0441 08
0002 044
06
044 0441
06
044
0441 06 30042 048 046 0461 048
0082 0421 049 0471 0421
thgnelelbaTmm
pots/smm5.1htiwselbatrofrebmunledoMhtiwselbatrofrebmunledoM
potNALPOUDs/smm5.2sgkthgieW gnippihS
emulov³mL
ehtotlwoBtfel
ehtnilwoBelddim
ehtotlwoBthgir
ehtotlwoBtfel
ehtnilwoBelddim
ehtotlwoBthgir
ten ssorg
0021 - S21118 - - S21418 - 83 24 007.0
0061 S61018 S61118 S61218 S61318 S61418 S61818 25 65 000.1
0002 S02018 S02118 S02218 S02318 S02418 S02818 56 07 002.1
0042 S42018 S42118 S42218 S42318 S42418 S42818 77 48 005.1
0082 S82018 S82118 S82218 S82318 S82418 S82818 09 89 008.1
Detail of marine foot:
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables with double sink, bowl BD 70
10-389DOC. NO. 10-389LEDITION 4 06.11
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
flow. The corners are coved, for easy cleaning.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on free stand-ing tables floor mounting brackets are avail-able to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with very good sound-deadeningproperties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and 1" over-
Model 821 20S
Subject to changes without notice.
1 2
L
C A B C
60
240
370
650440
L
2
X
X700
575 720 575720 720
+25
+25
-40
-40
305
580
900
2842
Scale 1:20Dimensions in mm
10-389
Dimensions mm
Model 821 24S
1. Drain 1 1/2"2. Overflow for hose Ø 24 mm inner
Model 821 24S / 824 24S Model 822 24S / 828 24SModel 820 24S / 823 24S
Tablelengthmm
Model with stainless steel top Model with Duoplan top Weight kgs Shippinvolume
m³L
bowls tothe left
bowls inthe middle
bowls tothe right
bowls tothe left
bowls inthe middle
bowls tothe right
net gross
2000 - 821 20S - - 824 20S - 64 70 1.200
2400 820 24S 821 24S 822 24S 823 24S 824 24S 828 24S 77 84 1.500
2800 820 28S 821 28S 822 28S 823 28S 824 28S 828 28S 90 98 1.700
Specification
TABLES WITH DOUBLE SINK BD 70, 700X440X240 MM
Detail of marine foot:
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLAN table topis constructed of 2 layers of stainless steelsheet bonded together to form a verystrong and hygienic surface with verygood sound-deadening properties.
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
0002 - - - 0401 048
06
- - -
300420471
04506
0421 0401 0450471 06
0082 049 0441 0421 049
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables with single sink, bowl BE-70 (spec.)
Model 781 16S
10-391DOC. NO. 10-391LEDITION 4 06.11
● STAINLESS STEEL (AISI 304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
The corners are coved, for easy cleaning.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on free stand-ing tables floor mounting brackets are avail-able to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with good sound-deadening proper-ties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and overflow.
Subject to changes without notice.
1 2
L
C A B C
60
400
340
650500
L 2
X
X700
575 575
+25
+25
-40
-40
305
580
900
2842
10-391
Dimensions mm
Model 781 24S / 784 24S Model 782 24S / 788 24SModel 780 24S / 783 24S
Specification
TABLES WITH SINGLE SINK BE 70 (SPEC), 700X500X400MM Scale 1:20Dimensions in mm
Model 781 24S
Tablelength mm
Model numbers for tables with 1.5 mmstainless steel top
Model numbers for tables with 2.5 mmstainless steel DUOPLAN top
Weight kgs Shippingvolume
m³Lbowl tothe left
bowl inthe middle
bowl tothe right
bowl tothe left
bowl inthe middle
bowl tothe right
net gross
1200 - 781 12S - - 784 12S - 40 45 0.7001600 780 16S 781 16S 782 16S 783 16S 784 16S 788 16S 49 56 1.0002000 780 20S 781 20S 782 20S 783 20S 784 20S 788 20S 64 70 1.2002400 780 24S 781 24S 782 24S 783 24S 784 24S 788 24S 77 84 1.5002800 780 28S 781 28S 782 28S 783 28S 784 28S 788 28S 90 98 1.700
1. Drain R 1 1/2" M2. Overflow for hose, Ø 24,5 mm, inner
Detail of marine foot:
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLANtable top is constructed of 2 layersof stainless steel sheet bonded to-gether to form a very strong andhygienic surface with very goodsound-deadening properties.
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
0021 --
- 0401- 08
--
-2
0061
0441
08 0441 0441 08
0002 044
06
044 0441
06
044
0441 06 30042 048 046 0461 048
0082 0421 049 0471 0421
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Tables with double sink, bowls BD 70 (spec.)
10-396
● STAINLESS STEEL (AISI304)
● HYGIENIC AND EASY-TO-CLEANCONSTRUCTION
● HEAVY GAUGE STAINLESS STEELSQUARE 40X40/30X30 MM TUBU-LAR FRAMEWORK
● ALSO AVAILABLE WITH 2.2 MMTHICK DUOPLAN TOP
● WIDE RANGE OF OPTIONALS
Model 791 24S/794 24S
DOC. NO. 10-396LEDITION 4 06.11
The corners are coved, for easy cleaning.The frame work is constructed of heavy gaugestainless steel square tubes vertical 40x40 mmand horizontal 30x30 mm, to provide a veryrigid construction. Wall fixing security brack-ets are included as standard. The frame isfitted with adjustable feet and on free- stand-ing tables floor mounting brackets are avail-able to permanently locate the table.A wide range of optional extras is available tomeet most individual requirements.For further specifications, please see overleafand product leaflet 10-399.
The table top is constructed of polished 1.2mm stainless steel. The rear edge is turned up60 mm with a safe return for easy cleaning.The front and side edges are formed to a 15mm anti-drip edge.The table top is also available in 2.2 mmDuoplan version, which is achieved by join-ing 2 layers of stainless steel sheet togetherunder heat and pressure with a special glue.This leads to a very sturdy high impact resist-ant top with good sound-dead ening prop-erties.The sink bowl is a pressed seamless unit fittedwith strainer and 1 1/2" waste and overflow.
Subject to changes without notice.
1 2
L
C A B C
60
400
340
650500
L 2
X
X700
575 575740740 740
+25
+25
-40
-40
305
580
900
2842
Model 791 24S/794 24S Model 792 24S/798 24S
1. Drain 1 1/2"2. Overflow for hose, Ø 24 mm, inner
10-396
TABLES WITH DOUBLE SINK BD 70 (SPEC.), 700X500X400 MM Scale 1:20Dimensions mm
Model 791 24S/794 24S
Model 790 24S/793 24S
Tablelength mm
Model number for tables with1.5 mm stainless steel top
Model number for tables with 2.5 mmstainless steel top type DUOPLAN
Weight kgs Shippinvolume
m³Lbowls tothe left
bowls inthe middle
bowls tothe right
bowls tothe left
bowls inthe middle
bowls tothe right
net gross
2000 - 791 20S - - 794 20S - 64 70 1.200
2400 790 24S 791 24S 792 24S 793 24S 794 24S 798 24S 77 84 1.500
2800 790 28S 791 28S 792 28S 793 28S 794 28S 798 28S 90 98 1.700
Dimensions in mm
Specification
Detail of marine foot:
SECTION X-X
Standard top
DUOPLAN
The 2.2 mm thick DUOPLAN table topis constructed of 2 layers of stainless steelsheet bonded together to form a very strongand hygienic surface with very good sound-deadening properties.
thgnelelbaTmm
tfelehtotlwoB elddimehtnilwoB thgirehtotlwoB foriaPsgel
L A B C A B C A B C
0002 - - - 0401 048
06
- - -
300420471
04506
0421 0401 0450471 06
0082 049 0441 0421 049
A A50
3
30
17.5 3165
40
Ø 11
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
10-399DOC. NO. 10-399LEDITION 6 06.10
Optional extras for s/s tables
WIDE RANGE OF OPTIONAL EXTRAS:
● UNDERSHELVES, FLOOR-CABINETS
● DRAWERS, BAYS OF DRAWERS
● GUIDE RACK
● SINK UNIT ACCESSORIES,WATER MIXER, DRAIN DETAILS,STRAINER BUCKET
● MARINE ACCESSORIES ETC.
The optional extras are intended for comple-tion of the table line. Due to the modularsystem, combinations for individual designare possible.The stainless steel details are of the samequality and finishing as the tables. The lam-inated chipboards and the plastic items are allof rigid, heavy duty design.The under shelves are available in severalexecutions; as solid or grid under shelf, witha raised rear edge and as marine execution.
The drawers have a front and frame in stain-less steel and are provided with a GN 1/1-150plastic container.The base of the drawers and cupboards areavailable in stainless steel or laminated execu-tion. The cupboards are provided with oneintermediate shelf.For further specifications of the differentmodels, please see the following pages.
DETERGENT CABINETS
All in stainless steel. Lockable. With hole for detergent hoose at side.
Specification
UNDERSHELVES - MARINE EXECUTION
All in polished stainless steel for laying in suitable numbers directly onthe accepting tables under frame.
BAYS OF DRAWERS
Drawers have front and frame in stainless steel and are provided with GN plasticcontainers in a choice of two different standard combinations. The casing is instainless steel. See specification below.
SINGLE DRAWERS
Front and frame in stainless steel. Provided with a GN 1/1-150 plastic container.
Specification
Specification
Specification
ledoMmmsnoisnemiD
noitpircseDhtgnel htped
S01897 004 016 flehsdirG
S680961008/004
0021016 dedaolnwodflehsrednudiloS
ledoMmmsnoisnemiD
htgnel htped thgieh
S02897 004 016 881
ledoMmmsnoisnemiD
noitucexetinUhtgnel htped thgieh
S03897
004 016 555
htiwtinuleetssselniatS051-1/1sreniatnoccitsalpNG3
S04897htiwtinuecipsleetssselniatS
sreniatnoccitsalpNG2051-6/1NG6dna051-1/1
ledoM srooDmmsnoisnemiD tnemecalP
elbatnihtgnel htped thgieh
S019071 004 016 555
tfeL
S11907 thgiR
OPTIONAL EXTRAS FOR S/S TABLES
FLOOR CABINETS
All in s/s steel execution, provided with one intermediate shelf.
Specification
One door cabinet in stainlesssteel execution.
OPEN GUIDE UNITS
Guide racks for dishwashing racks, in stainless steel. Three removable pairsof guides.
Specification
Guide racks for GN containers, all in stainless steel. Six removable pairs ofguides.
Specification
ledoMmmsnoisnemiD
noitucexEhtgnel htped thgieh
S778861 006 016 555tnorfnipotshtiW
egderaerdna
ledoMmmsnoisnemiD
noitucexEhtgnel htped thgieh
S188861 004 016 555tnorfnipotshtiW
egderaerdna
ledoM srooDmmsnoisnemiD
noitucexEnitnemecalP
elbathtgneL htpeD thgieH
S058971 004
016 555
leetssselniatStfeL
S15897 thgiR
S558972 008 leetssselniatS
tfeL
S65897 thgiR
ACCESSORIES FOR SINKS
SpecificationledoM noitpircseD knisroF
519861 rabedilS )042x005x055(55-EB
619861 dirggnisiaR )042x044x007(07-EB
419861
knisrofdiL
)002x004x005(05-EB
558861 )042x005x055(55-EB
658861 )042x044x007(07-EB
758861 )004x005x007(laiceps07-EB
OPTIONAL EXTRAS FOR S/S TABLES
CUTLERY CHUTEAll in stainless steel, removable
Specification
SPLASH BACKIn stainless steel
Specification
ledoMmmsnoisnemiD
htdiw thgieh
409861redrosA
005
509861 051
ledoM mmhtdiW
819861 004
CUTTING BOARDS IN POLYETHENE
SpecificationledoM noitpircseD
798861 sgnittifnoisnapxetadetnuomdraobgnittuC
861779gnidilsrofeliforphtiwdraobgnittucesooL
mm565x593,elbatfoegdetnorfno
STAINLESS STEEL OVER- AND INTERMEDIATE SHELVES ANDTOOL HOLDERS
SpecificationledoM noitpircseD
S000961 nialp,flehsetaidemretnielbavomers/S
redrosa-htgneLS100961
,flehsetaidemretnielbavomers/Segderaerdedlofhtiwnialp
OPTIONAL EXTRAS FOR S/S TABLES
MOUNTING PLATE FOR PRE-RINSE SPRAY UNITAll in stainless steel
Specification
ledoM mmhtdiW mmhcnebrevothgieH
209861 022 528
MOUNTING PLATES FOR MIXERSAll in stainless steel. For attachment at the tables rear edge.
SpecificationledoM noitucexE
268861 tecuafnoitisop-1roF
958861 tecuafnoitisop-2roF
OTHER ACCESSORIES
Specification
WATER TRAP
Model 798 84 (suitable for all sinks)
SET CONSISTING OF:Shut-off valve with overflow connection.
Specification
ledoMkniS
002x004x005kniS
042x005x055kniS
042x044x007kniS
004x005x007
08897 x x x x
ledoM noitpircseD
57897knisnidedlew,reniatnoccitsalphtiwtekcubreniartS
mottob
974861 tekcubreniartsrofreniatnocleetssselniatS
972961 evlavffo-tuhS
78897 )x2("2/1R.nnoc,tecuafnoitisop-2
858861 )x2(01Ø.nnoc,tecuafnoitisop-1
OPTIONAL EXTRAS FOR S/S TABLES
Subject to changes without notice.
10-399
OPTIONAL EXTRAS FOR S/S TABLES
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Stainless steel wall shelves
Models 682 16S
10-402DOC. NO. 10-402LEDITION 1 07.08
● RIGID CONSTRUCTION
● STAINLESS STEEL EXECUTION
● 12 MODELS
The turned up rear edge, front and side edgesensure a rigid construction. The shelves are allin 1.25 mm polished stainless steel SS 2333(AISI 304).Shelf supporting brackets for fixing directlyto the wall, are also in stainless steel.
From the standard models, there are choicesof two widths and six lengths.Other executions and sizes may be availableon request.For further specifications of the differentmodels, please see overleaf.
Subject to changes without notice.
Scale 1:20Dimensions mm
Specification
STAINLESS STEEL WALL SHELVES
Model No for wall shelf inclbrackets
Dimensions in mm Numbeof
brackets
Weight kgs Shippinvolume
m³ShelfD=300 mm
ShelfD=400 mm
L a net gross
682 08S 683 08S 800 6002
4 60.050
682 12S 683 12S 1200 1000 7 9
682 16S 683 16S 1600 700 (2x)3
10 12
0.100682 20S 683 20S 2000 900 (2x) 13 15
682 24S 683 24S 2400 733 (3x)4
16 18
682 28S 683 28S 2800 866 (3x) 18 21
10-402
Model 682 12S
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Stainless steel wall cupboards
10-450DOC. NO. 10-450LEDITION 2 05.10
● RIGID CONSTRUCTION
● STAINLESS STEEL
● WITH SHELF
● LOCKABLE
● EASY TO CLEAN
● 4 MODELS
The wall cupboards are made of stainless steeland have a polished exterior finish. All doorsare equipped with handle, magnetic lockingdevice and cylinder lock.They are all provided with two pairs of railsand stainless steel shelf. The height of theshelf can be adjusted.
There is a choice of four models with differentlengths.Other executions and sizes may be availableon request.For further specifications of the differentmodels, please see overleaf.
Model 97 71 36S
Subject to changes without notice.
Scale 1:20Dimensions mm
Specification
STAINLESS STEEL WALL CUPBOARDS
10-450
A
335370
35
700
904
1
2
3
ledoMAhtgneL
mmsgkthgieW gnippihS
³memulovten ssorg
S331779 004 72 82 001.0
S431779 006 43 53 051.0
S531779 008 34 44 062.0
S631779 0001 94 15 003.0
1.Hinge2.Shelf3.handle4.Sloping top (optional extra)
Model Description
97 74 61 22 Sloping top L=400 mm97 74 61 23 Sloping top L=6600 mm97 74 61 24 Sloping top L=800 mm97 74 61 25 Sloping top L=1000 mm
Optional extra
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
LOIPART
Exclusive Sales of Marine Equipment
Model E7WTNDN000
The 700XP range is designed to guaranteethe highest level of performance, reliability,energy saving, safety standards and ergonom-ic operation. These Electrolux worktops areavailable in 6 models, with or without drawerin 200mm, 400mm and 800mm versions.
EASY TO CLEAN• One piece pressed worktop in 1,5mm stain-less steel with smooth, rounded corners.• Entirely constructed in stainless steel withScotch Brite finish.• All models have right-angled, laser cut sideedges to allow flush-fitting joins betweenunits eliminating gaps and possible dirt traps.
EASY TO MAINTAIN• IPX4 water protection.EASY ON THE ENVIRONMENT• 98% recyclable by weight.• CFC free packaging.
10-507DOC. NO. 10-507LEDITION 1 08.11
Model E7WTNBN000 Model E7WTNHN000
Worktops 700XP
Subject to changes without notice.
Scale 1:20Dimensions mm
WORK TOPS 700XP
10-507
Specification
289 289
378 77811 11 11 11
27474
24103
149 450
7161253
730 730
400 800
ledoM CNPforebmuN
sreward
sgkthgieW gnippihS³memulov
ten ssorg
000NBNTW7E 511173-
6 9 350.0
000NDNTW7E 611173 01 31601.0
E00NDNTW7E 711173 1 51 91
000NHNTW7E 811173 - 81 22012.0
E00NHNTW7E 911173 1 52 03
Optional extrasledoM noitpircseD
640612740612703602M211173M311173053602
mm004=L,liardnahtnorfs/Smm008=L,liardnahtnorfs/Ssliardnahedisthgirrotfels/S
004esabnepO008esabnepO
esabneporofroosdegnihtfel/thgiR
ModelE7WTNHN00E
ModelE7WTNBN000
ModelE7WTNDN000
ModelE7WTNDN00E
ModelE7WTNHN000
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
LOIPART
Exclusive Sales of Marine Equipment
Model E9WTNDN000
The 900XP range is designed to guaranteethe highest level of performance, reliability,energy saving, safety standards and ergonom-ic operation. These Electrolux worktops areavailable in 6 models, with or without drawerin 200mm, 400mm and 800mm versions.
EASY TO INSTALL• Unit to be easily installed above 900XPopen base models.• All top models can be easily mounted onrefrigerated bases, open base cupboards, bridg-ing supports or cantilever systems.EASY TO CLEAN• Worktop in 2 mm, stainless steel.• Constructed in stainless steel with ScotchBrite finish.
• All models have right-angled side edges toallow flush fitting between units, eliminatinggaps and dirt traps.EASY ON THE ENVIRONMENT• CFC free packaging.• 98% recyclable by weight.
10-509DOC. NO. 10-509LEDITION 1 08.11
Model E9WTNBN000 Model E9WTNHN000
Worktops 900XP
Subject to changes without notice.
Scale 1:20Dimensions mm
WORKTOPS 900XP
10-509
Specification
ledoM CNPforebmuN
sreward
sgkthgieW gnippihS³memulov
ten ssorg
000NBNTW9E 651193 - 31 61170.0
E00NBNTW9E 751193 1 81 22
000NDNTW9E 851193 - 02 52431.0
E00NDNTW9E 951193 1 72 23
000NHNTW9E 061193 - 44 05072.0
E00NHNTW9E 161193 1 25 85
Optional extrasledoM noitpircseD
640612740612440612M351193M451193053602
mm004=L,liardnahtnorfs/Smm008=L,liardnahtnorfs/Ssliardnahedisthgirrotfels/S
004esabnepO008esabnepO
esabneporofrooddegnihtfel/thgiR
ModelE9WTNDN00E
ModelE9WTNBN000
ModelE9WTNDN000
ModelE9WTNBN00E
ModelE9WTNHN000
290290 290
378 7781111 178 1111 11 11
275
82 708
917
930930 930
400200 800
24
290290 290
378 7781111 178 1111 11 11
275
82 708
917
1452
930930 930
400200 800
24
ModelE9WTNHN00E
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Modular shelving
10-620DOC. NO. 10-620LEDITION 3 04.09
● RIGID CONSTRUCTION
● HIGH PERFORMANCE
● SPACE SAVING
● STAINLESS STEEL
● WIDE RANGE OF MODELS
● EASY TO ASSEMBLE
This modular shelving system is intendedfor hygienic storage and handling.The units are made of stainless steel of highquality and are completely compatible.The horizontal shelves are of louvered typeand can be height adjusted in steps of 160mm.The uprights are provided with height ad-justable marine feet.The module shelf parts are very easy toassemble. A cross bar can be used to reinforcethe sections.For further specifications of the differentshelving units and optional extras, please seeoverleaf.
Example of assembled shelves
MODULAR SHELVING, STAINLESS STEEL
Model L=Length Depth* Depth B**
16 85 00 80016 85 01 90016 85 02 100016 85 03 1100 400 37516 85 04 120016 85 05 130016 85 06 140016 85 07 1500
16 85 08 80016 85 09 90016 85 10 100016 85 11 1100 500 47516 85 12 120016 85 13 130016 85 14 140016 85 15 1500
16 85 16 80016 85 17 90016 85 18 100016 85 19 1100 600 57516 85 20 120016 85 21 130016 85 22 140016 85 23 1500
Model Depth Height
16 85 96 40016 85 97 500 180016 85 98 600
Optional extras
* Refers to the uprights (the shelf is 50 mm smaller)** See example of angle-assembled shelves
LOUVERED SHELVES
side guar rail
end guard rail
cross bar
upright
louvered shelf
58
25
82
12
12.5
12.5
12
Ø 6(2x)
Foot – marine execution:
Model Description
16 86 02 Cross bar, s/s, L= 80016 86 03 Cross bar, s/s, L= 90016 86 04 Cross bar, s/s, L=100016 86 05 Cross bar, s/s, L=110016 86 06 Cross bar, s/s, L=120016 86 07 Cross bar, s/s, L=130016 86 08 Cross bar, s/s, L=140016 86 09 Cross bar, s/s, L=1500
S55 00 40 End guard rail, s/s, L= 400S55 00 50 End guard rail, s/s, L= 500S55 00 60 End guard rail, s/s, L= 600S55 00 80 Side guard rail, s/s, L= 800S55 00 90 Side guard rail, s/s, L= 900S55 01 00 Side guard rail, s/s, L= 1000S55 01 10 Side guard rail, s/s, L= 1100S55 01 20 Side guard rail, s/s, L= 1200S55 01 30 Side guard rail, s/s, L= 1300S55 01 40 Side guard rail, s/s, L= 1400S55 01 50 Side guard rail, s/s, L= 1500
S5U U-shaped brace, incl. screwand nut
S5P Pair of plate braces, incl.2 screws and 2 nuts
Details of assembled shelves (shelves on one side of the uprights):
U-shaped brace
ASSEMBLY INSTRUCTIONS:
UPRIGHTS INCL. DECK PLATE KIT
MODULAR SHELVING, STAINLESS STEEL
An example of line assembled single shelf (fig.1)
An example of two in line assembled shelves (fig. 2)
An example of two in line assambled shelves + angle asembled shelf (fig. 3)
Assembly istruction for side guard rails:
An example of angle-assembled shelves:
ASSEMBLY INSTRUCTIONS:
When the shelves are to be assembled on bothside of the uprights, two U-shaped braces anda pair of plate braces for two side guard rails haveto be used (see fig. 2, 3).
The braces are delivered incl. screws and nuts.
When the shelves are to be assembled on oneside of the uprights only, two U-shaped bracesfor each side guard rail have to be used (see fig.1)
Subject to changes without notice.
10-620
MODULAR SHELVING, STAINLESS STEEL
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
LOIPART
Exclusive Sales of Marine Equipment
Chopping block
DOC. NO. 10-802LEDITION 1 07.08
10-802
Model 809 780
● RIGID, HEAVY DUTY DESIGN
● POLYETHYLENE BUTCHERBLOCK
● STAINLESS STEEL STAND
This floor standing chopping block is madeof rigid and heavy duty construction.The top is made of polyethylene block thick-ness 100mm.The tube legs 35 x 35 mm are made of 18-10 stainless steel and provided with marinefeet.For further specifications of the differentmodels, please see overleaf.
Subject to changes without notice.
CHOPPING BLOCKScale 1:20Dimensions mm
10-802
Specifications
560
560490
490
430
540
55
55
10
10
35
Ø8
35
75
75
Position of bolting holes:
ledoMsgkthgieW emulovgnippihS
³mten ssorg
087908 55 85 004.0
900
600 600
560 560
30
265+ 25- 0
+ 25- 0
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Work tops, stands and floor cabinets in var-ious designs with open compartments andshelves, cabinets with doors, drawers or doorsand drawers are all available in the Electroluxcooking series.The drawers are fitted with white plasticinsert containers.The stands with shelf and the open cabinetsand cabinets with doors are provided withrolling racks.
10-853DOC. NO. 10-853LEDITION 5 06.09
All stands and cabinets are fitted with adjust-able legs Ø 57 mm.All units are made of stainless steel sheet,Gastro-Norm adapted and are designed foreasy cleaning.For further specifications and optional extras,please see overleaf.
Model 16 96 37with 16 96 28
Model 16 96 43
Model 16 95 93with 16 96 32
Work tops, stands, cabinets, optional extras
● STAINLESS STEEL
● WIDE RANGE
● MODULAR SYSTEM
● UNIFORM DESIGN
● FLEXIBLE INTERIORS
● GASTRO-NORM ADAPTED
B
B
536
536
460
50
50
0
0
460
140±
140±
600±
600±
A
A
=
=
=
=
=
=
=
=
420
420
A
600
B
44676 78 15
290
= =
220
145
600
600
526 44676
50
78 15
290
= =
2
12
500
500
3
3
WORK TOP WITH SINKModel 16 96 32
Scale 1:20Dimensions mm
1. Opening for mixing battery Ø 37 mm2. Drain Ø 50 mm
(draining hole can be fitted with removable level control pipe)
WORK TOPSModels 16 96 29 (16 96 28, 16 96 30, 16 96 31)
STANDS WITH SHELFModels 16 95 93 (16 95 92, 16 95 94, 16 95 95)
Models 16 96 38 (16 96 35,16 96 41 16 96 45, 16 96 48)
CABINETS
Model 16 96 39 Model 16 96 40
Ø75
Ø92
Ø9
120°
3. Rolling rack
Joining top units to stands and cupboards:
For joining, remove the screws that hold the topunit to the package.Remove the feet from the top unit. Use thescrews and the z-shaped brackets contained inpackage to join the two parts together as shownon picture beside.
CL
WORK TOPS, STANDS, CABINETS
z-shaped bracket
Detail of marine foot:
WORK TOPS
Specification – dimensions mm
CABINETS – OPEN, WITH DOORS / DRAWERS*/ DRAWERS* + DOORS
Specification – dimensions mm
16 96 37 16 96 3916 96 36 16 96 40 16 96 42 16 96 44 16 96 43
16 96 46 16 96 47 16 96 49 16 96 50
CABINETS WITH DOORS / DRAWERS / DRAWERS + DOORS
Specification – dimensions mm
* Removal of plastic insert containers: lift up and pull out
STANDS WITH SHELF
OPTIONAL EXTRAS
Specification
Model Description A BWeight kgs Shipping
volume m³net gross
16 96 28 Work top 400 326 400 18 22 0.120
16 96 29 Work top 600 526 600 23 29 0.170
16 96 30 Work top 800 726 800 34 41 0.220
16 96 31 Work top 1000 926 1000 40 48 0.270
16 96 32Work top 600 withsink
526 600 17 23 0.170
Model Description A BWeight kgs Shipping
volume m³net gross
16 95 92 Stand with shelf 310 400 16 20 0.200
16 95 93 Stand with shelf 600 510 600 20 25 0.270
16 95 94 Stand with shelf 800 710 800 30 35 0.350
16 95 95 Stand with shelf 1000 910 1000 34 40 0.420
Model Description A BWeight kgs Shipping
volume m³net gross
16 96 3516 96 3616 96 37
Cabinet 400, openCabinet 400, with doorCabinet 400, with 2 drawers
310 400101316
141720
0.200
16 96 3816 96 3916 96 40
Cabinet 600, openCabinet 600, with 2 doorsCabinet 600, with 2 drawers
510 600121720
172225
0.2700.2900.290
16 96 4116 96 4216 96 4416 96 43
Cabinet 800, openCabinet 800, with 2 doorsCabinet 800, with 2 drawersCabinet 800, with 2 drawers + 1door
710 800
17233233
23293839
0.3500.3700.370
16 96 4516 96 4616 96 47
Cabinet 1000, openCabinet 1000, with 3 doorsCabinet 1000, with 2 drawers + 2doors
910 1000203033
273740
0.4300.4500.450
16 96 4816 96 4916 96 50
Cabinet 1200, openCabinet 1200, with 3 doorsCabinet 1200, with 2 drawers + 2doors
1110 1200223234
304042
0.5000.5200.520
Model Description Model Description
16 96 51 Joint cover 16 95 96 Extra shelf, L= 400
16 96 52 Tray holder 16 95 97 Extra shelf, L= 600
16 96 53 Frying baskets 16 95 98 Extra shelf, L= 800
16 96 71 Basket for pasta 16 98 55 Mixing battery
Subject to changes without notice.
10-853
WORK TOPS, STANDS, CABINETS, OPTIONAL EXTRAS
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
● STAINLESS STEEL(AISI 304)
● SMALL DIMENSIONS
● INTERGRATED BRACKET FOREASY MOUNTING
● EASILY CLEANABLE
Hand wash basin, TS 430
10-930DOC. NO. 10-930LEDITION 3 07.08
Model 51 00 10
The TS 430 hand wash basin has smalloutside dimensions which makes it spacesaving and well suited for galleys, bars, pan-tries and similar on board. The back edge hasfour holes for screwing to bulkhead and alower bracket connected to the outlet withtwo fastening holes.
In this way the fastening holes come far apartmaking possible a very stabile installation.The unit is delivered with an overflow anddrain plug with a chain.For further specifications, please see overleaf.
Subject to changes without notice.
HAND WASH BASIN, TS 430Scale 1:10Dimensions mm
10-930
Specification
1. Central low bracket2. Overflow3. Drain ISO - G 1 1/2 B
Model TypeWeight kgs Shippin
volumem³net gross
51 00 10 TS 430 4 5 0.060
Optional extra:
Model Description
213551 Mixer, single lever
Mixer 213551(optional extra)
LOIPART ABP.O. Box 694SE 441 18 Alingsås, SwedenPhone +46 322 66 83 60Telefax +46 322 63 77 47E-mail [email protected]
Exclusive Sales of Marine Equipment
Hand wash basins,dispensers, etc.
Hand wash basin ED2/ED3
● HAND WASH BASINS
● MIXER TAPS
● PAPER DISPENSER
● SOAP DISPENSER
● WASTE BIN
All models of hand wash basins are made instainless steel and intended for wall mount-ing. Models ED2 and ED3 have closedshroud for concealed in -and outlet and aresupplied with integrated waste and watertrap. Models ED2-0 and ED3-0 are sup-plied with integrated waste, support in brack-ets and wall panel.Mixer taps are of solid brass construction inchrome finish. Mixer tap Ares is a single lever tap with pop-up waste included.Touch-free mixer tap Sport1 is a very sturdyelectronic faucet activated by infrared sensor.Electronics, solenoid valve and temperature
control is located inside the product. Themixer is provided with a filter and a no returnvalve and delivered with an externally mount-ed 9V battery and an AC/DC adapter. Set-tings of the unit are adjustable manually afterinstallation and can also be adjusted by re-mote control.All dispenser models as well as waste bin areintended for wall mounting and made instainless steel.Soap dispenser with refill window is suppliedwith 1 litre plastic container for refill. Paperdispenser with refill window is suitable forstandard size paper.For further specifications, please see overleaf.
10-932DOC. NO. 10-932LEDITION 1 04.11
Hand wash basin ED2-0/ED3-0
Soap dispenser ICS1M Paper dispenser ICPMM
Waste bin ICA3
Mixer tap AresTouch-free mixer tap Sport1
HAND WASH BASINS, MIXER TAPS, DISPENSERS, ETC. Dimensions mm
A
B
a
b
c d
ledoMmmsnoisnemiD
noitalltasnIthgieh
htpeD A B a b c d
0-2DE058
601 88286
133 5.053 5±331 5±051
0-3DE 031 033 004 004 5±771 5±871
Hand wash basin ED2
Hand wash basin ED3
Hand wash basin ED2-0/ED3-0
Specification - dimensions
Drain connection, all basin models (ED2, ED2-0/ED3-0) = G 1 1/4”
HAND WASH BASINS, MIXER TAPS, DISPENSERS, ETC. Dimensions mm
Soap dispenser ICS1M
Paper dispenser ICPMM
Waste bin ICA3
Subject to changes without notice.
10-932
HAND WASH BASINS, MIXER TAPS, DISPENSERS, ETC.
ledoM noitpircseDsgkthgieW emulovgnippihS
³mten ssorg
0-2DE nisabhsawdnaH 0.1 4.1 30.0
2DE nisabhsawdnaH 0.4 5.4 440.0
0-3DE nisabhsawdnaH 5.1 9.1 30.0
3-DE nisabhsawdnaH 0.5 6.5 560.0
serA revelelgnis,patrexiM - 4.1 300.0
1tropS patreximeerf-hcuoT - 6.2 700.0
MMPCI resnepsidrepaP 5.3 9.3 320.0
M1SCI resnepsidpaoS 4.1 7.1 10.0
3ACI nibetsaW 0.6 0.7 840.0
Specification
Mixer tap AresTouch-free mixer tap Sport1