100% uv-stabilized stake is designed for safe and ......the tensar north american green® 12 in....

2
PERMANENT ANCHOR By preventing soil erosion, Tensar North American Green® products save government agencies, contrac- tors and landowners millions of dollars each year. But even the best products can’t perform to their full potential unless they are properly installed. From start to finish, Tensar offers everything you need for the success of your project. The Tensar North American Green® 12 in. ShoreMax® Stake is designed especially for the installation of ShoreMax® Transition Mat panels in areas where metal anchors are not desired, such as: ˴ High-traffic shorelines ˴ Beaches ˴ Residential swales THE SHOREMAX STAKE ADVANTAGE Manufactured from high-impact, UV-stabilized ABS (Acrylonitrile Butadiene Styrene) plastic, the stakes can provide nearly indestructible, long-lasting, secure anchoring of ShoreMax Transition Mats, VMax® Composite Turf Reinforcement Mats and SediMax™ straw wattles and coir logs in sandy-to-hard, rocky soils. The flat, round head fits into the recessed openings of the ShoreMax Transition Mat and sets flush with the panel surface. The highly versatile stakes also have a 5 /16 in. opening beneath the head to provide a tie-off point for lashing products, such as coir logs, to the ground. Serrations on its leg increase resistance – securing it from pulling out of loose, sandy soils. Specifications MATERIAL AND PERFORMANCE The UV, plastic stake is made from a high-impact UV-stabilized Acrylonitrile Butadiene Styrene plastic. The 1 in. (2.54 cm) by 12 in. (30.50 cm) stake shall taper 1 in. (2.54 cm) and have a 1.5 in. (3.81 cm) flat, round head. The stake must exhibit ample rigidity to enable being driven into hard ground, with sufficient flexibility to resist shattering. The stake shall have serrations on the leg to increase resistance to pull-out from loose, sandy soils. The Tensar North American Green® ShoreMax® Stake is a 100% UV-stabilized stake designed to safely and effectively secure high-performance turf reinforce- ment mats and transition/revetment mats. 12 Inch ShoreMax ® Stake Secures Erosion Control Products 100% UV-Stabilized Stake is Designed for Safe and Effective Anchoring

Upload: others

Post on 08-Nov-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 100% UV-Stabilized Stake is Designed for Safe and ......The Tensar North American Green® 12 in. ShoreMax® Stake is designed especially for the installation of ShoreMax® Transition

PERMANENT ANCHORBy preventing soil erosion, Tensar North American Green® products save government agencies, contrac-tors and landowners millions of dollars each year. But even the best products can’t perform to their full potential unless they are properly installed. From start to finish, Tensar offers everything you need for the success of your project.

The Tensar North American Green® 12 in. ShoreMax® Stake is designed especially for the installation of ShoreMax® Transition Mat panels in areas where metal anchors are not desired, such as:

˴ High-traffic shorelines

˴ Beaches

˴ Residential swales

THE SHOREMAX STAKE ADVANTAGEManufactured from high-impact, UV-stabilized ABS (Acrylonitrile Butadiene Styrene) plastic, the stakes can provide nearly indestructible, long-lasting, secure anchoring of ShoreMax Transition Mats, VMax® Composite Turf Reinforcement Mats and SediMax™ straw wattles and coir logs in sandy-to-hard, rocky soils.

The flat, round head fits into the recessed openings of the ShoreMax Transition Mat and sets flush with the panel surface. The highly versatile stakes also have a 5/16 in. opening beneath the head to provide a tie-off point for lashing products, such as coir logs, to the ground. Serrations on its leg increase resistance –securing it from pulling out of loose, sandy soils.

SpecificationsMATERIAL AND PERFORMANCEThe UV, plastic stake is made from a high-impact UV-stabilized Acrylonitrile Butadiene Styrene plastic. The 1 in. (2.54 cm) by 12 in. (30.50 cm) stake shall taper 1 in. (2.54 cm) and have a 1.5 in. (3.81 cm) flat, round head. The stake must exhibit ample rigidity to enable being driven into hard ground, with sufficient flexibility to resist shattering. The stake shall have serrations on the leg to increase resistance to pull-out from loose, sandy soils.

The Tensar North American Green® ShoreMax® Stake is a 100% UV-stabilized stake designed to safely and effectively secure high-performance turf reinforce-ment mats and transition/revetment mats.

12 Inch ShoreMax® Stake Secures Erosion Control Products100% UV-Stabilized Stake is Designed for Safe and Effective Anchoring

Page 2: 100% UV-Stabilized Stake is Designed for Safe and ......The Tensar North American Green® 12 in. ShoreMax® Stake is designed especially for the installation of ShoreMax® Transition

THE TENSAR ADVANTAGETensar is the world’s leading provider of turnkey, performance-guaranteed erosion control solutions. We can handle any erosion issues, whether your site needs short-term protection or permanent reinforcement.

As with all Tensar specialty construction products and engineering services, we continually invest in erosion control innovation to ensure cost-effective solutions and exceptional results.

For more information on the ShoreMax stake or other Tensar products and systems, call 1-800-TENSAR-1, visit www.tensarnagreen.com or email us at [email protected]. The 12 in. ShoreMax® Stake.

RevetMax™ System Components

Component Function

ShoreMax® Mat Flexible transition mat that offers an armoring solution in turbulent flow and wave attack applications

VMax™ Turf Reinforcement Mat Permanent, erosion control products that aid in vegetation establishment and provide long-term turf reinforcement. Used as an underlayment with the ShoreMax mat.

ShoreMax® Stake UV stabilized high-impact plastic stakes designed to help secure turf reinforcement and transition mats

Percussion Earth Anchors Corrosion resistant earth anchors that  increase the loading and pull-out strength of the RevetMax system

Design Services Design and installation guidance through the use of our Erosion Control Materials Design Software 5.0 (ECMDS).

Tensar International Corporation2500 Northwinds ParkwaySuite 500Alpharetta, GA 30009

©2014, Tensar International Corporation. Tensar North American Green is a registered trademark. Certain products and/or applications described or illustrated herein are protected under one or more U.S. patents. Other U.S. patents are pending, and certain foreign patents and patent applications may also exist. Trademark rights also apply as indicated herein. Final determination of the suitability of any information or material for the use contemplated, and its manner of use, is the sole responsibility of the user. Printed in the U.S.A. EC_RVMX_FLY_SHOREMAXSTAKE_5.14

Distributed by: