101 reasons to switch to FlameBar BW11.

1. FlameBar BW11 ductwork system saves you time and money and its easy to install.

2. The FlameBar BW11 ductwork system is UL Classified and Approved.

3. The FlameBar BW11 ductwork system eliminates the need for two 2-hour fire-rated enclosures.

4. You can avoid hundreds of thousands of dollars in wasted drywall replacement costs with FlameBar BW11.

5. The FlameBar BW11 ductwork system regains valuable space previously required by fire-rated enclosures.

6. FlameBar BW11 reduces the chances of unforeseen future lawsuits caused by accusations of compromised indoor air quality due to wet and moldy drywall originating during the construction process.

7. Its only .7 mm thick! Thats right, only .03 inches.

8. The FlameBar BW11 ductwork system eliminates the need for costly fire dampers and unsightly access doors.

9. The FlameBar BW11 ductwork system installation is inspected and approved with one visit to the jobsite NOT four or five. You gain days even weeks!

10. The FlameBar BW11 ductwork system is water resistant and strong enough to withstand any fungal attack.

11. European, Middle-Eastern and Asian countries have been using FlameBar BW11 for years as a proven method for fire-resistant ductwork and now you can too!

14. If this product endured the most severe conditions of a four-time hurricane force it can withstand anything take it from one who knows... FlameBar BW11 is irrefutably the best and only solution for 2-hour fire-rated ductwork.

Joseph Darnaby, Stiles Construction

16. FlameBar BW11 is chemically resistant to many acids and solvents ensuring an excellent resistance to chemical attack.

18. FlameBar BW11 systems are non-hygrosco pic and have been tested in an artificial Weatherometer to an equivalent of 60 years external exposure.

22. FlameBar BW11 is factory applied and installed by your qualified sheet metal contractor.

25. "Before using FlameBar BW11, our projects were subject to anywhere from three to six inspections on the drywall shaftwall. On projects where FlameBar BW11 was used, the rated duct is inspected and the General Contractor can progress the finish work

more expeditiously with less delays. The time saved on a project is priceless, and our clients have been very satisfied.

Bill Encinosa, Cohen, Freedman, Encinosa & Associates

27. The Flamebar BW11 ductwork system can be used with any duct fitting whether its rectangular, flat, oval, and spiral - each part can be joined together using flanged pattern (TDC, TDF, Ductmate, Angle Iron) connections.

29. FlameBar BW11 can be installed both vertically or horizontally for a completely versatile application.

33. Regain Valuable Time! No more multiple municipality fire-rated enclosure inspections.

37. Quality Assurance: Step 1 United FireSpray offers training on how to install all FlameBar BW11 treated ductwork.

38. Quality Assurance: Step 2 An authorized United FireSpray Inspector inspects all FlameBar BW11 installations.

39. Quality Assurance: Step 3 All inspected and approved jobs receive an Approval Certificate affixed with a Seal of Compliance.

42. Never worry about compromised indoor air quality when you choose FlameBar BW11.

44. FlameBar BW11 is environmentally safe as it does not evolve gasses which damage the ozone layer.

47. You can save hundreds in omitting a framing schedule.

53. Nothing is more cost effective than FlameBar BW11.

John Trout, Developer/Contractor

59. Put an end to pesky drywall tension headaches.

62. FlameBar BW11 is perfect for typical basement and enclosed parking garage ductwork systems as it reduces the amount of space needed for ceiling clearance.

67. United FireSpray is committed to ensuring seamless 2-hour fire-rated ductwork installations.

70. FlameBar BW11 systems can be painted or sprayed with a water-based paint for a desired interior design alternative.

73. Increase jobsite productivity by reducing the manpower needed to complete the loading of drywall shaftwall.

80. Calculate the hours you will save by eliminating drywall shaftwall and treat yourself to a day off youll deserve it.

84. We not only closed the book on building fire-rated drywalled ductwork we burned it!

93. FlameBar BW11 achieves a high noise reduction index.

101. FlameBar BW11 is a water-based, fire-resistant compound that is sprayed directly on the sheet-metal, ductwork components. The spray is applied within the confines of United FireSpray in a controlled environment to ensure the application

meets all FlameBar BW11 specifications. Once the spray is applied, the treated ductwork is cured and sealed so that the coating

does not peel, flake or deteriorate. In the event the coated ductwork suffers damage prior to inspection, a factory supplied touch-up

kit is readily available for jobsite repair.