103402nde manual3.qxd:103402 manual 6/25/09 11:46 am page 1 · compact tile cutter...

Everest RoadLytham St AnnesLancashireFY8 3AZTel: +44 (0) 1253 789180Fax: +44 (0) 1253 789182www.vitrex.co.uk

103402NDE_manual3.qxd:103402_manual 6/25/09 11:46 AM

Compact Tile CutterOwner’s Safety and OperatingManual

10 3402NDE


Tel: +44 (0) 1253 78918002

Contents

Safety Instructions ..................................................3Machine Specification & Electrical Requirements ......4Assembly &Operating Instructions ......................5-7Maintenance&Warranty ........................................7

Owner’s Safety and OperatingManual

Compact Tile Cutter


To fit theCuttingBlade, first carefully lift thehingedsectionof the table top.Removescrewfromsplashboardandremove thesplashboard toallowaccess.Removebladesecuringnutandbladewasher.

05

Close the table tophingedsectionand insert thebladeguard set behind thebladeopening. Adjust theheightaccordingly.

Before use, fill reservoir withwater. For cleanestresults, only use enoughwater to cover the rim of theblade. Checkwater level frequently during use.Do Not allow the blade to run dry!

Assembly & Operation Operating InstructionsStraight Cuts

Positionbladeagainst thebladecarrierwith thedirectionalarrowsonthebladefacinganti-clockwise. Replace thebladewasherandbladesecuringnut. Thenreplace thesplashboardandsecurewithscrew.

Switch on themachine.

Maintaining aneven pressure, hold the tile againstthe cutting guide and push steadily through thecutting blade.When the cut is complete,switch off themachine.

Position the tile on the table top.

Place the Rip Guide on the table top and line upwiththemeasurement graduations on either edge to therequired size. When correctly aligned, tighten the ripguide securing nuts.

Fax: +44 (0) 1253 789182

Compact Tile Cutter


06

Operating InstructionsAngular Cuts

Operating InstructionsMitre Cuts

Place the tileagainst theangled table top.

Switchon themachineand feed the tile throughthecuttingblade.When the cut is complete,switch off themachine.

Locate theappropriate lugs into theslotsprovidedon the insideedgeof the reservoir.

Formitre cuts, raise thehingedsectionof the table to therequiredangle (22.5°or45°)

Re-tighten theknobandposition the tilewithin thejawsof theMitreGuide.

Switchon themachineandwhileholding the tile firmlyinposition,push themitreguidesteadilyalong the ripguide, feeding the tile through thecuttingblade.When the cut is complete, switch off themachine.

Slacken thediamond-shapedknobandset therequiredangleof cut.

Press theMitreGuide intoplaceon theRipGuide.

Tel: +44 (0) 1253 789180


07

Operating InstructionsExtension Table

Operating Instructions

Slideoutextension table, followingarrowdirection.Afteruse, cleanandremoveany tiledebrisbeforeretracting theextension table.

Maintenance• Always check the blade before use forcracks or signs of damage.

• Ensure that the reservoir is filledup to the recommended level.Do not overfill or allow it to run dry.

• Always clean themachine after use,after first ensuring that it is disconnectedfrom themains.

• Rinse out reservoir thoroughlyto remove all sludge andwipe downoutside ofmachine using a clothor sponge.

• When not in use, store the electricalcable and plug under themachinein the space provided.

• No other servicing is required in normaluse. No attempt should bemade to repairor replace internal components as this willinvalidate any claimwhilst the product isunder guarantee.

Consumer Advice• Do not dispose of electrical productswith your normal householdwaste.• Always use recycling facilitieswhenever possible.• Additional recycling information canbe found through your local Authorityor Retailer.

• For further information or advice,please call the Vitrex TechnicalHelpline on 01253 789180.

This electric tile cutter has beenmanufactured to a high quality standard. It is guaranteed against faultymaterials andworkmanship for 12months from the date of purchase. Any claimmust be accompanied by a valid till receipt as proof of purchase.

A faultymachinewill either be repaired or replaced free of charge. If a direct replacement is not available,an alternative to the same or greater value/specificationwill be offered.

This guarantee does not covermachine defects caused by or resulting from: a)Misuse, abuse or neglect,b) Trade, Professional or hire use, c) Repairs attempted by anyone other than our authorised repair agent,

d) Ingress of foreign objects, substances or accidentIn the unlikely event of a fault occurring, contact should bemade through the Vitrex Technical Helpline (01253 789180).

The above guarantee is only validwithin the UK and does not affect your statutory rights.The guarantor is Q.E.P. Co. UK Ltd., Everest Road, LythamSt. Annes, Lancashire, FY8 3AZ (Registered No. 04988177 England).

Fax: +44 (0) 1253 789182

E189-5416

Locate the lugson theextension table into theslotsofthesideof themainbodyandensure table is levelbeforeuse.

Compact Tile Cutter

Q.E.P. Co UK Ltd is committed to a continuing programofproduct improvement. Consequently, please be advisedthat specifications, performance, appearance, anddimensions of QEP/Vitrex products are subject to changewithout notice. Formore up-to-date information about ourrange of products, please contact our Customer ServiceOffice on +44(0)1253 789180 or your local distributor.


103402nde manual3.qxd:103402 manual 6/25/09 11:46 am page 1 · compact tile cutter...

Documents