10384 hss cat - hygienic stainless · pdf filehss hygienic stainless steels ltd contents ......

23216 HSS Cover.qxd:30773-5 HSS Cover 17/3/09 10:51

Hygienic StainlessSteels Ltd.

Since its formation in 1987 Hygienic

Stainless Steels has built on its

knowledge and expertise serving the

hygienic process industries.

Understanding the needs and

requirements within the industry

enables us to supply an unrivalled,

comprehensive range of products. ASME

BPE Tube and Fittings and V-Tek Filters

are two examples of our constant

development of the process market,

making quality and availability

paramount.

HSS also provides a full, in-house

fabrication service allowing manufacture

of non-standard products with minimum

lead times.

Our strategy is not only to stock and

supply but to anticipate the needs of

the customer now and in the future.

23216 HSS Cover.qxd:30773-5 HSS Cover 17/3/09 10:51

HSS

HYGIENIC STAINLESS STEELS LTDCONTENTS

PAGE NO

FABRICATION 1 – 2

RJT UNION PARTS 3 - 4

SRJT UNION PARTS 5

RJT/CIP UNION PARTS 6

IDF UNION PARTS 7 - 8

SMS UNION PARTS 9

DIN IMPERIAL UNION PARTS 10

DIN METRIC UNION PARTS 11

3A ACME UNION PARTS 12

TRI CLAMPS 13 - 14

CLAMP FERRULES 15 - 17

CLAMP GASKETS AND PROPERTIES 18 - 19

90 BENDS , TEES AND REDUCERS 20 - 22

Y PIECES AND SWEPT TEES 23

HOSE TAILS 24

V-TEK BUTTERFLY VALVES AND ACCESSORIES 25 - 27

ACTUATORS 28 - 29

V-TEK NON RETURN VALVES 30

V-TEK IN LINE SIGHT GLASSES 31

SANITARY 2 WAY BALL VALVES 32

SANITARY 3 WAY BALL VALVES 33

PIPE CLIPS 34 - 35

TUBE , BOX SECTION , FLAT BAR , ANGLE , AND ROUND BAR 36

FLANGES 37

BSP FITTINGS , NOMINAL BORE AND METRIC 38

V-TEK FILTERS 39

V-TEK PUMP PROTECTION STRAINERS 40

SPRAY BALLS / TANK WASHERS 41

NEW PRODUCTS AND MISCELLANEOUS STOCK 42

10384_HSS_Cat.qxd 28/6/06 8:08 am Page i

FABRICATION

H.S.S. OFFER A COMPLETE IN - HOUSE STAINLESS STEEL FABRICATION AND POLISHING SERVICETO PRODUCE ANYTHING FROM REPEAT BATCHES TO ONE OFF PROTOTYPES.

WITH IN HOUSE CAD (COMPUTER AIDED DESIGN) FACILITIES WE ARE MORE THAN CAPABLE OF DESIGNING AND MANUFACTURING MOST THINGS IN STAINLESS STEEL FROM

�” HIGH PURITY COMPONANTS TO 10” FILTER MANIFOLDS. 1 2

11

Y piece, Swept Tee, ClampFerruled Conical Reducer and

RJT Hose Liners.

Clamp Ferruled Eccentric Reducer toASME BPE.

Clamp Ferruled Butterfly Valve MirrorPolished O.D. and I.D

HSS

10384_HSS_Cat.qxd 28/6/06 8:08 am Page 1

FABRICATION

HSS2

Batch of fittings c/w tube welded andpolished for heat exchanger

manufacturer.

316L Stainless Steel handrail forswimming pool

Portable duplex filter system completewith pressure gauges and sample

point for distillery packaging


RJT - RING JOINT TYPE BS4825 PT5.

A sanitary pipe line fitting for manual cleaning prominently used where the pipe lines are frequently dismantled for washing and sterilising.

RJT UNIONS BS4825 PART 5. 1” - 4”

RJT HEXAGONAL NUT 304 SIZE A B C D 1” 33.45 22.20 50.80 42.26 1.1/2” 46.00 22.20 65.00 54.96 2” 58.67 22.20 79.40 67.92 2.1/2” 71.40 22.20 92.00 80.62 3” 84.10 22.00 104.80 93.32 4” 109.70 22.20 130.00 118.72

RJT WELD MALE 316, 316L SIZE A B C D 1” 22.20 25.65 45.72 27.00 1.1/2” 34.90 38.35 58.42 27.00 2” 47.60 51.08 72.72 27.00 2.1/2” 60.30 63.75 85.42 27.00 3” 73.00 76.45 98.12 27.00 4” 97.60 101.85 123.52 27.00

RJT WELD LINER 316, 316L SIZE A B C D 1” 22.20 25.65 41.30 12.70 1.1/2” 34.90 38.35 54.00 12.70 2” 47.60 51.05 66.70 12.70 2.1/2” 60.30 63.75 79.40 12.70 3” 73.00 76.45 92.10 12.70 4” 97.60 101.85 117.50 12.70

RJT `O` RING - NITRILE, EPDM, PTFE, VITON, SILICONE.

SIZE A B 1” 33.30 6.60 1.1/2” 46.00 6.60 2” 58.70 6.60 2.1/2” 71.40 6.60 3” 84.10 6.60 4” 100.50 6.60

HSS3


RJT UNIONS BS4825 PART 5. 1” - 4”

RJT EXPANDING MALE 304, 316 SIZE A B C D 1” 32.50 25.50 20.00 45.72 1.1/2” 45.20 38.20 24.00 58.42 2” 57.90 50.90 28.00 72.72 2.1/2” 70.60 63.60 32.00 85.42 3” 83.30 76.30 32.00 98.12 4” 108.70 101.70 32.00 123.82

RJT EXPANDING LINER 304, 316 SIZE A B C D 1” 32.50 25.50 41.30 20.00 1.1/2” 45.20 38.20 54.00 24.00 2” 57.90 50.90 66.70 28.00 2.1/2” 70.60 63.60 79.40 32.00 3” 83.30 76.30 92.10 32.00 4” 108.70 101.70 117.50 32.00

RJT BLANK CAP 316, 316L SIZE A B C D 1” 26.20 32.50 41.30 8.70 1.1/2” 38.80 45.20 54.00 8.70 2” 51.50 58.00 66.70 8.70 2.1/2” 64.20 70.60 79.40 8.70 3” 77.00 83.50 92.10 8.70 4” 89.50 96.00 117.50 8.70

RJT BLANK NUT & CHAIN 304 SIZE A B C 1” 23.50 50.80 42.26 1.1/2” 23.50 65.00 54.96 2” 23.50 79.40 67.92 2.1/2” 23.50 92.00 80.62 3” 23.50 104.80 93.32 4” 23.50 130.00 118.72

RJT SPANNER

SIZE A B C D 1” 52.00 100.00 250.00 25.00 1.1/2” 66.00 125.00 290.00 25.00 2” 80.00 150.00 305.00 25.00 2.1/2” 93.00 165.00 340.00 25.00 3” 106.00 180.00 370.00 25.00 4” 131.00 210.00 450.00 25.00

HSS4


SRJTThis is a modified RJT union which is used to suit larger tube diameters.

SRJT UNIONS 4” - 7”

4 SRJT HEXAGONAL NUT 304

A B C D 4” 118.72 110.00 130.00 27.00

5” - 7” SRJT ROUND NUT 304 SIZE A B C D 5” 144.13 134.00 165.00 27.00 6” 169.52 160.00 190.00 27.00 7” 194.93 185.00 216.00 27.00

SRJT WELD MALE 316, 316L SIZE A B C D 4” 97.60 102.00 123.52 29.00 5” 122.60 127.00 148.93 29.00 6” 148.60 153.00 174.32 29.00 7” 173.60 178.00 199.73 29.00

SRJT WELD LINER 316, 316L

SIZE A B C D 4” 97.60 102.00 117.50 16.30 5” 122.60 127.00 142.90 16.30 6” 148.60 153.00 168.30 16.30 7” 173.60 178.00 193.70 16.30

SRJT UNION GASKET - EPDM SIZE A B C D 4” 98.00 116.00 4.50 9.00 5” 123.00 141.20 5.85 9.00 6” 148.60 166.50 5.85 9.00 7” 174.00 192.00 5.85 9.00

HSS5


RJT/CIPThis is a modified RJT union which has a crevice free joint which makes it suitable for CIP.

RJT/CIP UNIONS 1/2” - 4”

RJT/CIP HEX NUT 304 SIZE A B C D 1/2” 22.00 17.40 13.40 28.50 3/4” 30.00 25.50 16.00 38.00 1” 42.26 33.45 22.20 50.80 1.1/2” 54.96 46.00 22.20 65.00 2” 67.92 58.67 22.20 79.40 2.1/2” 80.62 71.40 22.20 92.00 3” 93.32 84.10 22.20 104.80 4” 118.72 109.70 22.20 130.00

RJT/CIP WELD MALE 304, 316, 316L

RJT/CIP WELD LINER 304, 316, 316L

SIZE A B C D E 1/2” 9.50 12.80 16.20 22.00 16.00 3/4” 15.80 19.10 23.80 30.00 19.00 1” 22.20 25.65 36.50 45.72 21.50 1.1/2” 34.90 38.35 49.20 58.42 21.50 2” 47.60 51.05 61.90 72.72 21.50 2.1/2” 60.30 63.75 74.60 85.42 21.50 3” 73.00 76.45 87.30 98.12 21.50 4” 97.60 101.85 112.70 123.52 21.50

RJT/CIP `O` RING - NITRILE, EPDM, VITON

SIZE A B C D 1/2” 9.75 17.80 1.60 3.20 3/4” 16.00 25.40 1.60 3.20 1” 22.20 39.50 3.20 6.40 1.1/2” 34.90 52.20 3.20 6.40 2” 47.60 64.90 3.20 6.40 2.1/2” 60.30 77.60 3.20 6.40 3” 73.00 90.30 3.20 6.40 4” 97.50 115.70 3.20 6.40

SIZE A B C D E 1/2” 9.50 12.80 16.20 22.00 16.00 3/4” 15.80 19.10 23.80 30.00 19.00 1” 22.20 25.65 36.50 45.72 21.50 1.1/2” 34.90 38.35 49.20 58.42 21.50 2” 47.60 51.05 61.90 72.72 21.50 2.1/2” 60.30 63.75 74.60 85.42 21.50 3” 73.00 76.45 87.30 98.12 21.50 4” 97.60 101.85 112.70 123.52 21.50

HSS6


IDF - INTERNATIONAL DIARY FEDERATION ISO2853 & BS4825 PT4.

A crevice-free union suitable for CIP where the pipe lines remain permanently in position.

IDF UNIONS BS4825 PART 4. 1” - 4”

IDF HEXAGONAL NUT 304 SIZE A B C D E 1” 30.50 34.34 30.00 3.50 46.00 1.1/2” 43.50 47.86 30.00 3.50 60.00 2” 57.00 61.37 30.00 3.50 75.00 2.1/2” 70.70 74.88 30.00 3.50 90.00 3” 83.30 84.80 30.00 3.50 105.00 4” 112.00 122.05 34.90 4.70 133.00

IDF WELD MALE 316, 316L SIZE A B C D 1” 22.20 25.65 21.50 37.13 1.1/2” 34.90 38.35 21.50 50.65 2” 47.60 51.05 21.50 64.16 2.1/2” 60.30 63.75 21.50 77.76 3” 73.00 76.45 21.50 91.19 4” 97.50 101.85 30.00 125.90

IDF WELD LINER 316, 316L SIZE A B C D 1” 22.20 25.65 33.80 21.50 1.1/2” 34.90 38.35 47.00 21.50 2” 47.60 51.05 60.50 21.50 2.1/2” 60.30 63.75 74.00 21.50 3” 73.00 76.45 87.50 21.50 4” 97.50 101.85 120.60 30.00

IDF SEAL RING - NITRILE, EPDM PTFE, VITON

SIZE A B C D 1” 23.20 29.20 32.50 7.00 1.1/2” 35.90 42.70 46.00 7.00 2” 48.60 56.20 59.50 7.00 2.1/2” 61.30 69.90 73.20 7.00 3” 74.00 82.60 86.50 7.00 4” 98.60 111.00 119.00 9.60

IDF BLANK CAP 316, 316L SIZE A B C 1” 29.20 33.80 7.00 1.1/2” 42.70 47.00 7.00 2” 56.20 60.50 7.00 2.1/2” 69.90 74.00 7.00 3” 82.60 87.50 7.00 4” 111.10 120.60 8.00

IDF SPANNER

SIZE A B C D 1” 47.00 100.00 246.00 22.00 1.1/2” 62.00 122.00 284.00 22.00 2” 78.00 150.00 308.00 22.00 2.1/2” 93.00 160.00 340.00 22.00 3” 110.00 175.00 368.00 22.00 4” 136.00 230.00 390.00 26.00

HSS7


IDF UNIONS BS4825 PART 4. 1” - 4”

IDF EXPANDING MALE 304, 316 SIZE A B C D 1” 25.50 29.20 16.50 37.13 1.1/2” 38.20 42.70 19.50 50.65 2” 50.90 56.20 19.50 64.16 2.1/2” 63.60 69.90 25.00 77.67 3” 76.30 82.60 30.00 91.19

IDF EXPANDING LINER 304, 316 SIZE A B C D 1” 25.50 29.20 33.80 20.00 1.1/2” 38.20 42.70 47.00 20.00 2” 50.90 56.20 60.50 25.00 2.1/2” 63.60 69.90 74.00 30.00 3” 76.30 82.60 87.50 30.00

IDF BLANK NUT AND CHAIN

IDF SLOTTED ROUND NUT 304

SIZE A B C D 1” 50.00 3.50 30.00 34.34 1.1/2” 65.00 3.50 30.00 47.86 2” 79.00 3.50 30.00 61.37 2.1/2” 95.00 3.50 30.00 74.97 3” 108.00 3.50 30.00 88.40 4” 135.00 4.70 34.90 115.41

IDF (UNSLOTTED) ROUND NUT 304 SIZE A B C D 1” 44.50 3.50 30.00 34.34 1.1/2” 57.20 3.50 30.00 47.86 2” 70.00 3.50 30.00 61.37 2.1/2” 86.00 3.50 30.00 74.97 3” 102.00 3.50 30.00 88.40 4” TBA 4.70 34.90 115.41

SIZE A B C 1” 30.00 46.00 34.34 1.1/2” 30.00 60.00 47.86 2” 30.00 75.00 61.37 2.1/2” 30.00 90.00 74.88 3” 30.00 105.00 88.40 4” 34.90 133.00 122.05

HSS8


SMS UNIONS 1” - 4”

SMS - SWEDISH METRIC SYSTEM

SMS L-TYPE SEAL RING - EPDM, NITRILE, VITON, PTFE SIZE A B C D 1” 22.80 25.10 31.80 5.30 1.1/2” 35.80 38.10 47.80 5.30 2” 48.80 51.10 60.80 5.30 2.1/2” 61.00 63.60 73.30 5.30 3” 73.40 76.10 85.80 5.30 4” 98.20 104.00 115.70 5.30

SMS BLANK NUT & CHAIN 304 SIZE A B C D 1” 51.00 19.00 6.00 40.00 1.1/2” 74.00 23.00 8.00 60.00 2” 84.00 24.00 8.00 70.00 2.1/2” 100.00 28.00 10.00 85.00 3” 114.00 30.00 10.00 98.00 4” 138.00 31.00 10.00 125.00

SMS F-WELD LINER 304, 316, 316L SIZE A B C D E 1” 22.50 25.00 32.00 35.50 15.50 1.1/2” 35.50 38.00 47.90 55.00 16.00 2” 48.50 51.00 60.40 65.00 17.00 2.1/2” 60.50 63.50 73.50 80.00 17.00 3” 72.90 76.10 86.50 93.00 19.00 4” 98.50 102.50 116.50 127.00 19.00

SMS ROUND NUT (6 SLOTS) 304 SIZE A B C D 1” 32.30 51.00 19.00 40.00 1.1/2” 48.30 74.00 23.00 60.00 2” 60.50 84.00 24.00 70.00 2.1/2” 74.00 100.00 28.00 85.00 3” 87.00 114.00 30.00 98.00 4” 113.00 138.00 31.00 125.00

HSS9

Used with an aseptic gasket to enable full CIP where the pipe linesrequire minimal dismantling.

SMS G-WELD MALE 304, 316, 316L SIZE A B C D 1” 22.50 25.00 19.00 40.00 1.1/2” 35.50 38.00 23.00 60.00 2” 48.50 51.00 23.00 70.00 2.1/2” 60.50 63.50 27.00 85.00 3” 72.90 76.10 27.00 98.00 4” 97.60 101.60 30.00 125.00

SMS BLANK CAP 316, 316L SIZE A B C D 1” 32.00 35.50 3.50 7.50 1.1/2” 48.00 55.00 5.00 9.00 2” 60.00 65.00 5.00 10.00 2.1/2” 73.50 80.00 5.00 10.00 3” 86.00 93.00 5.00 11.00 4” 112.00 118.00 6.00 11.00


DIN11851Unions suitable for imperial and metric tube.

DIN 11851 IMPERIAL UNIONS 1” - 4”

DIN ROUND NUT (4 SLOTS) 304 SIZE A B C D E INCH (DIN) 1” (25) 63.00 36.00 21.00 56.00 52.00 1.1/2” (40) 78.00 49.00 21.00 70.00 65.00 2” (50) 92.00 62.00 22.00 84.00 78.00 2.1/2” (65) 112.00 80.00 25.00 102.00 95.00 3” (80) 127.00 94.00 30.00 117.00 110.00 4” (100) 148.00 115.00 31.00 138.00 130.00

DIN IMPERIAL WELD MALE 316 SIZE A B C D E F 1” 25.65 22.20 26.00 29.00 7.00 52.00 1.1/2” 38.35 34.90 38.00 33.00 7.00 65.00 2” 51.05 47.60 50.00 35.00 7.00 78.00 2.1/2” 63.75 60.30 66.00 40.00 8.00 95.00 3” 76.45 73.00 81.00 45.00 8.00 110.00 4” 101.85 97.60 100.00 54.00 10.00 130.00

DIN IMPERIAL WELD LINER 316SIZE A B C D E F 1” 22.20 25.65 35.00 26.00 44.00 22.00 1.1/2” 34.90 38.35 48.00 38.00 56.00 26.00 2” 47.60 51.05 61.00 50.00 68.00 28.00 2.1/2” 60.30 63.75 79.00 66.00 86.00 32.00 3” 73.00 76.45 93.00 81.00 100.00 37.00 4” 97.60 101.85 114.00 100.00 121.00 44.00

DIN JOINT RING - PERBUNAN, EPDM, VITON, PTFE. SIZE A B C INCH (DIN) 1” (25) 5.00 30.00 40.00 1.1/2” (40) 5.00 42.00 52.00 2” (50) 5.00 54.00 64.00 2.1/2” (65) 5.00 71.00 81.00 3” (80) 5.00 85.00 95.00 4” (100) 6.00 104.00 114.00

DIN BLANK CAP 316, 316LSIZE A B C D INCH (DIN) 1” (25) 44.00 35.00 13.00 10.00 1.1/2” (40) 56.00 48.00 13.00 10.00 2” (50) 68.00 61.00 14.00 11.00 2.1/2” (65) 86.00 79.00 16.00 12.00 3” (80) 100.00 93.00 16.00 12.00 4” (100) 121.00 114.00 20.00 15.00

DIN BLANK NUT & CHAIN 304 SIZE A B C INCH (DIN) 1” (25) 63.00 21.00 56.00 1.1/2” (40) 78.00 21.00 70.00 2” (50) 92.00 22.00 84.00 2.1/2” (65) 112.00 25.00 102.00 3” (80) 127.00 30.00 117.00 4” (100) 148.00 31.00 138.00

HSS10


DIN 11851 METRIC DN10 - DN32

DIN ROUND NUT (4 SLOTS) 304 SIZE A B C D E DN10 38.00 19.00 18.00 33.00 28.00 DN15 44.00 25.00 18.00 38.00 34.00 DN20 54.00 31.00 21.00 48.00 44.00 DN32 70.00 42.00 21.00 62.00 58.00

DIN METRIC WELD MALE 304, 316 SIZE A B C D E DN10 15.00 10.00 21.00 4.00 28.00 DN15 21.00 16.00 21.00 4.00 34.00 DN20 25.00 20.00 24.00 6.00 44.00 DN32 37.00 32.00 32.00 7.00 58.00

DIN METRIC WELD LINER 304, 316 SIZE A B C D E DN10 10.00 15.00 18.00 22.00 17.00 DN15 16.00 21.00 24.00 28.00 17.00 DN20 20.00 25.00 30.00 36.00 18.00 DN32 32.00 37.00 41.00 50.00 25.00

DIN JOINT RING - PERBUNAN, EPDM, VITON, PTFE

SIZE A B C DN10 4.50 12.00 24.00 DN15 4.50 18.00 26.00 DN20 4.50 23.00 33.00 DN32 5.00 36.00 46.00

DIN SPANNER SIZE A

DIN 10 - 15 175 DIN 25 - 50 250 DIN 65 - 100 290

HSS11

DIN SPANNER

ALL DIN METRIC FITTINGS AND DIN 11864 ASEPTIC FITTINGS AVAILABLE ON REQUEST.


US 3A UNIONS 1” - 4”

3A A bevel seat union with an ACME thread.

3A SHORT BEVEL SEAT WELD MALE 304, 316, 316L

SIZE A B C D 1” 37.13 22.20 25.65 18.30 1.1/2” 50.65 34.90 38.35 18.30 2” 64.17 47.60 51.05 19.10 2.1/2” 77.67 60.30 63.75 22.20 3” 91.19 73.00 76.45 23.10 4” 119.25 97.60 101.85 26.20

3A SHORT BEVEL SEAT WELD LINER 304, 316, 316L

SIZE A B C D E F 1” 22.20 25.65 29.50 33.30 7.90 18.30 1.1/2” 34.90 38.35 42.60 46.80 8.70 18.30 2” 47.60 51.05 55.70 60.30 10.30 19.10 2.1/2” 60.30 63.70 68.80 73.80 11.10 22.30 3” 73.00 76.45 81.90 87.30 11.90 23.10 4” 97.60 101.85 108.10 114.30 14.30 26.20

3A BLANK CAP 316, 316L SIZE A B C D E 1” 33.30 29.50 3.20 7.90 11.90 1.1/2” 46.80 42.60 4.00 8.70 14.30 2” 60.30 55.70 4.00 10.30 15.90 2.1/2” 73.80 68.80 4.80 11.10 16.70 3” 87.30 81.90 4.80 11.90 18.30 4” 114.30 108.10 5.60 14.30 20.60

3A HEXAGONAL NUT 304 SIZE A B C D 1” 30.30 23.00 4.00 46.00 1.1/2” 43.40 24.60 5.50 61.10 2” 56.50 27.00 5.50 76.20 2.1/2” 69.60 29.60 5.50 91.30 3” 82.70 32.50 6.40 106.40 4” 108.90 38.10 6.40 137.60

HSS12


HSS13


CLAMPS TO BS4825 PART 3 - STANDARD 304

13MHH - HEAVY CLAMP SINGLE HINGE 13MHP HIGH PRESSURE CLAMP

SIZE TUBE O.D.

A

mm

SIZE TUBE O.D.

A

mm ½” -¾” 28.0 1”-1½” 53.6 ½”- ¾” 28.0

2” 67.0 1½” 52.0 2½” 80.6 2” 65.5 3” 94.0 2½” 79.0

3½” 110.0 3” 92.5 4” 122.0 4” 120.5

4½” 134.0 6” 170.0 6” 170.4 8” 220.0

Wing Nut Type - 12 Brass Nut / SS304 Bolt

13MHHM - HEAVY CLAMP 3-PIECE CLAMP

SIZE TUBE O.D.

A

mm

SIZE TUBE O.D.

A

mm ½” -¾” 28.2 1”-1 ½” 53.6 1”-1 ½” 53.9

2” 67.0 2” 67.4 2½” 80.6 2½” 80.9 3” 94.0 3” 94.4 4” 122.0 4” 122.4 6” 175.0

Wing Nut Type - 14 Wing Nut Type - 14

TECHNICAL DATA – O.D. CLAMPS

13MHH – HEAVY CLAMP PRESSURE RATING (psi) - with wing nut tightened to 25in-lb of torque

SIZE TUBE O.D. TEMPERATURE

( °F) (°C)

½” - ¾” 1”-1.5” 2” 2.5” 3” 4” 6” 8”

70 21 1500 500 450 400 350 200 150 100 250 121 1200 250 250 200 150 125 75 50

13MHHM – HEAVY CLAMP PRESSURE RATING (psi) with wing nut tightened to 25in-lb of torque


( °F) (°C)

½” - ¾” 1”-1.5” 2” 2.5” 3” 4”

70 21 1500 500 450 400 350 200 250 121 1200 250 250 200 150 125

13MHP – HEAVY CLAMP PRESSURE RATING (psi) - with nuts tightened to 20ft-lb of torque


( °F) (°C)

1½” 2” 2.5” 3” 4”

70 21 1000 1000 1000 1000 300 250 121 800 800 800 800 200

3-PIECE CLAMP PRESSURE RATING (psi) - with wing nut tightened to 25in-lb of torque


( °F) (°C)

½” - ¾” 1”-1.5” 2” 2.5” 3” 4”

70 21 600 550 450 350 350 50 121 300 275 225 160 150

To convert Pressure values from psig to kPa use the following formula: psi x 6.895 = kPa (approx).Example: 200psi x 6.895 = 1379kPa.

HSS14


CLAMP - FERRULES CROSS REFERENCE TABLE

BS US - 3A BPE CLAMP TYPE

FERRULE SIZE

(Tube O.D.) (Inch & DIN)

A B C 13LB

CLAMP & SADDLE DIN 13MHH 13MHHM 13MHP

½" 9.5 12.7 25.4 ½"-¾" - ½"-¾" ½"-¾" -

¾" 15.8 19.0 25.4 ½"-¾" - ½"-¾" ½"-¾" -

DN10 10.0 13.0 34.0 - DN10-20 - - -

DN15 16.0 19.0 34.0 - DN10-20 - - -

DN20 20.0 23.0 34.0 - DN10-20 - - -

1" 22.2 25.4 50.5 1-1½" DN25 1-1½" 1-1½" 1-1½"

DN25 26.0 29.0 50.5 1-1½" DN25 1-1½" 1-1½" 1-1½"

DN32 32.0 35.0 50.5 1-1½" DN25 1-1½" 1-1½" 1-1½"

1½" 34.9 38.1 50.5 1-1½" DN25 1-1½" 1-1½" 1-1½"

DN40 38.0 41.0 50.5 1-1½" DN25 1-1½" 1-1½" 1-1½"

2" 47.6 50.8 64.0 2” DN50 2” 2” 2”

DN50 50.0 53.0 64.0 2” DN50 2” 2” 2”

2 ½" 60.3 63.5 77.5 2½" - 2½" 2½" 2½"

DN65 66.0 70.0 91.0 3” DN65 3” 3” 3”

3" 73.0 76.2 91.0 3” DN65 3” 3” 3”

DN80 81.0 85.0 106.0 - DN80 3½" - -

3½" 84.7 88.9 106.0 - DN80 3½" - -

4" 97.6 101.6 119.0 4” DN100 4” 4” 4”

DN100 100.0 104.0 119.0 4” DN100 4” 4” 4”

DN115 110.3 114.3 130.0 - DN115 4½" - -

4½" 110.3 114.95 130.0 - DN115 4½" - -

5" 123.0 127.0 144.4 5” - - - -

DN125 125.0 129.0 155.0 - DN125 5½" - -

5½" 135.76 140.55 155.0 - DN125 5½" - -

6" 146.8 152.5 166.9 6” - 6” 6” 6”

154mm 150.0 154.0 166.9 6” - 6” 6” 6”

DN150 150.0 154.0 183.0 - DN150 - - -

6.63” 163.1 169.35 183.0 6.63” DN150 6.63” - -

8" 197.6 203.2 217.7 8” - 8” 8” -

204mm 200.0 204.0 217.7 8” - 8” 8” -

DN200 200.0 204.0 233.5 - DN200 -

8.63” 213.9 220.55 233.5 8.63” DN200 8.63”

10" 247.2 254.1 268.5 10” DN250 -

254mm 250.1 254.1 268.5 10” DN250 -

10.63" 266.3 273.0 286.1 - - 10.63”

12" 298.0 304.9 319.3 12” DN300 -

DN300 300.0 304.0 319.3 12” DN300 -

304mm 300.8 304.8 319.3 12” DN300 -

HSS15


SIZE

HSS16


HSS17


-16-

GASKETS FOR CLAMP FITTINGS

BS4825 Pt.3, US-3A , ASME BPE

GASKETS – TYPE 1 STANDARD ½” & ¾”

GASKETS – TYPE 2 FLANGED 1” – 12”

SIZETUBEO.D.

A

mm

B

mm

SIZETUBEO.D.

A

mm

B

mm½” 21.8 9.9 1” 52.7 22.8

¾” 21.8 16.3 1½” 52.7 35.8

2” 66.2 48.8

2½” 79.7 60.5

3” 93.2 73.1

4” 121.2 97.8

GASKETS – TYPE 1 STANDARD 1” – 8” 6” 169.1 148.0

1” 50.0 22.7 8” 220.0 199.0

1½” 50.0 35.9 10” 270.7 249.0

2” 63.5 48.6 12” 321.5 300.0

2½” 76.2 61.3

3” 88.9 74.0

4” 118.0 98.6

6” 165.0 147.8

8” 216.0 196.6

SPECIAL GASKETS

SMART GASKETS We also offer the Smart Gasket line of specialty gaskets for use with Smart Clamps. These Gaskets install between two standard sanitary flanges and allow the use of sensors (thermocouples) and spore traps (details on application).

SCREEN GASKETS Fluid conditioning gaskets are available in a wide variety of meshes and materials (reference chart available on application)

ORIFICE PLATES Orifice gaskets are available in many materials (details on application)

HSS18


CLAMP GASKET MATERIAL PROPERTIES

AVAILABLE GASKET MATERIAL

BUNA - N (BLACK OR WHITE)

• Least expensive elastomer gasket • Nitrile compound is very elastic making for a leak proof connection

• Good chemical resistance for use with petroleum solvents, alcohol etc.

• 3A qualified • Meets 21CFR 177.2600 • Useful temperature range from

(-40°F to 225°F) or (-40°C to 107°C)

TEFLON (PTFE)

• Commonly used for food and pharmaceutical applications

• Excellent chemical resistance • Not suitable for great temperature fluctuations, Teflon tends to cold flow and will not return to its original shape.

• 3A qualified • Meets 21CFR 177.2600 • Passes cytotoxicity testing • Pharmaceutical Class VI approved • Useful temperature range from

(-110°F to 400°F) or (-79°C to 204°C)

SILICONE (PLATINUM CURED)

• 3A qualified • Meets 21CFR 177.2600 • Passes cytotoxicity testing

• Pharmaceutical Class VI approved • Useful temperature range from

(-20°F to 450°F) or (-29°C to 232°C)

SILICONE (PEROXIDE CURED)



(-20°F to 450°F) or (-29°C to 232°C)

VITON (FLOUREL)



(-20°F to 450°F) or (-29°C to 232°C)

EPDM



( -55°F to 275°F) or (-48°C to 135°C)

TEF STEEL

• Does not cold flow (creep), retains shape and seal properties

• Excellent chemical resistance • Steam resistance • Minimal thermal expansion • Teflon & PM316L

• 3A qualified • Meets 21CFR 177.2600 • Passes cytotoxicity testing • Pharmaceutical Class VI approved • Useful temperature range from

(-110°F to 400°F) or (-79°C to 204°C)

GYLON BIO PRO

• Creep Relaxation 40% • Compression range 25% - 40% • Recovery ( before pre-stressing) 30% • Pressure rating 1200 psi (83 bar) • Flammability will not support flame • Bacterial growth will not support

• Meets FDA regulations 21CRF177.1550 • Pharmaceutical Class VI approved • Bam approved • TUV certified • Temp Range -268°C to 260°C • ASME BPE 2001 compliant

EPDM TEFLON BUNA-N VITON SILICONE GYLON PROPERTY 40MP-E 40MP-G 40MP-U 40MP-V 40MP-X

Temperature range -55°F to 275°F -40°F to 450°F -40°F to 225°F -20°F to 400°F -80°F to 450°F -268°C TO 260°C

Acid Resistance Good-Excellent Excellent Good Good Good TBA Alkali Resistance Good-Excellent Excellent Fair-Good Poor-Good Poor-Fair TBA Petroleum Oil Resistance Poor Excellent Excellent Excellent Good TBA Vegetable Oil Resistance Good Excellent Good Excellent Good TBA Abrasion Resistance Good-Excellent Excellent Good Good Good-Excellent TBA Compression Set Fair Cold Flows Good Good-Excellent Good-Excellent TBA

HSS19


-18-

BS BENDS POLISHED AND DESCALED 1” - 4”

90 DEGREE LONG BEND 1.5 X D BS4825 PT 2. 304, 316L

SIZE A B C D E 1/2�” 12.70 1.60 60.00 21.90 19.05 3/4” 10.05 1.60 60.00 32.00 28.00 1” 25.40 1.60 65.00 25.00 38.10

1.1/4” 31.75 1.60 85.00 35.00 50.00 1.1/2” 38.10 1.60 85.00 25.00 57.15

2” 50.80 1.60 110.00 30.00 76.20 2.1/2” 63.50 1.60 135.00 35.00 95.25

3” 76.20 1.60 155.00 38.00 114.30 4” 101.60 2.00 195.00 38.00 152.40

90 DEGREE SHORT BEND 1.5 X D BS4825 PT2. 304, 316L

SIZE A B C D 1” 25.40 1.60 43.50 38.10 1.1/2” 38.10 1.60 63.50 57.15 2” 50.80 1.60 88.50 76.20 2.1/2” 63.50 1.60 113.50 95.25 3” 76.20 1.60 133.50 114.30 4” 101.60 2.00 173.50 152.40

45 DEGREE LONG BEND 1.5 X D

BS4825 PT2. 304, 316L SIZE A B C D

1/2” 12.70 1.60 TBA 38.10 3/4” 19.05 1.60 TBA 57.10

1” 25.40 1.60 30.20 38.10 1.1/2” 38.10 1.60 41.30 57.15 2” 50.80 1.60 58.70 76.20 2.1/2” 63.50 1.60 76.20 95.25 3” 76.20 1.60 93.70 114.30 4” 101.60 2.00 122.20 152.40

90 DEGREE BEND 1 X D IMPERIAL 316L

SIZE A B C D 1” 25.40 1.20 / 1.60 55.00 25.40 1.1/2” 38.10 1.20 / 1.60 70.00 38.10 2” 50.80 1.20 / 1.60 82.00 50.80 2.1/2” 63.50 1.60 105.00 63.50 3” 76.20 1.60 110.00 76.20 4” 101.60 2.00 150.00 101.60

2 X D AND 3 X D RADIUS BENDS ALSO IN STOCK.

HSS20


BS TEES BS4825 PART 2. POLISHED AND DESCALED

1” - 4" SHORT EQUAL TEE 304, 316L

SIZE A B C ½” 12.70 1.60 32.00 ¾” 19.05 1.60 44.00 1” 25.40 1.60 43.50

11/4” 31.75 1.60 66.00 1.1/2” 38.10 1.60 63.50

2” 50.80 1.60 88.50 2.1/2” 63.50 1.60 113.50

3” 76.20 1.60 133.50 4” 101.60 2.00 173.50

PULLED TEE 316L SIZE A B C D 1” 25.40 1.60 43.50 14.20 1.1/2” 38.10 1.60 63.50 21.60 2” 50.80 1.60 88.50 29.10 2.1/2” 63.50 1.60 113.50 35.30 3” 76.20 1.60 133.50 41.40 4” 101.60 2.00 173.50 54.70

PULLED REDUCING TEE BS4825 PT.2 316LSIZE A B C D E

¾” X ½” 19.05 1.60 50.00 10.00 12.70 1” X ½” 25.40 1.60 50.00 27.00 12.70 1” X ¾” 25.40 1.60 50.00 27.00 19.05

1.1/2”x1” 38.10 1.60 63.50 22.00 25.40 2”x1” 50.80 1.60 88.50 29.00 25.40

2”x1.1/2” 50.80 1.60 88.50 29.00 38.10 2.1/2”x1” 63.50 1.60 113.50 35.00 25.40

2.1/2”x1.1/2” 63.50 1.60 113.50 35.00 38.10 2.1/2”x2” 63.50 1.60 113.50 35.00 50.80 3”x1.1/2” 76.20 1.60 133.50 41.00 38.10

3”x2” 76.20 1.60 133.50 41.00 50.80 3”x2.1/2” 76.20 1.60 133.50 41.00 63.50

4”x2” 101.60 2.00 173.50 55.00 50.80 4”x2.1/2” 101.60 2.00 173.50 55.00 63.50

4”x3” 101.60 2.00 173.50 55.00 76.20

EQUAL CROSS

SIZE A B C 1” 25.40 1.60 55.00

1.1/2” 38.10 1.60 70.00 2” 50.80 1.60 100.00

HSS21


BS REDUCERS 1” - 4” POLISHED AND DESCALED

CONCENTRIC REDUCER 316L

SIZE A B C 3/4” X �1/2” 19.05 12.70 20.00 1” X �1/2” 25.40 12.70 19.40 1” X 3/4” 25.40 19.05 16.00

1.1/2” x 1” 38.10 25.40 29.00 2” x 1” 50.80 25.40 53.00

2” x 1.1/2” 50.80 38.10 41.00 2.1/2” x 1.1/2” 63.50 38.10 64.00

2.1/2” x 2” 63.50 50.80 40.00 3” x 1.1/2” 76.20 38.10 81.00

3” x 2” 76.20 50.80 55.00 3” x 2.1/2” 76.20 63.50 41.00

4” x 2” 101.60 50.80 100.00 4” x 2.1/2” 101.60 63.50 76.00

4” x 3” 101.60 76.20 53.00

ECCENTRIC REDUCER 316L

SIZE A B C 3/4” X �1/2” 19.05 12.70 21.50 1” X �1/2” 25.40 12.70 22.90 1” X 3/4” 25.40 19.05 26.80

1.1/2” x 1” 38.10 25.40 35.00 2” x 1” 50.80 25.40 54.00

2” x 1.1/2” 50.80 38.10 36.00 2.1/2” x 1.1/2” 63.50 38.10 47.00

2.1/2” x 2” 63.50 50.80 35.00 3” x 2” 76.20 50.80 80.00

3” x 2.1/2” 76.20 63.50 44.00 4” x 2” 101.60 50.80 97.00

4” x 2.1/2” 101.60 63.50 69.00 4” x 3” 101.60 76.20 77.00

HSS22


Y PIECES AND SWEPT TEESPOLISHED AND DESCALED �1/2” - 4”

CAPITAL Y PIECES 316L SIZE A B C D 1/2” 12.70 1.60 35.00 30.00 3/4” 19.05 1.60 40.00 35.00 1” 25.40 1.60 60.00 50.00

1.1/2” 38.10 1.60 75.00 65.00 2” 50.80 1.60 90.00 75.00

2.1/2” 63.50 1.60 137.00 116.00 3” 76.10 1.60 160.00 135.00 4” 101.60 2.00 180.00 150.00

45 DEGREE Y PIECE 316L SIZE A B C D E 1” 25.40 1.60 100.00 30.00 70.00 1.1/2” 38.10 1.60 150.00 45.00 105.00 2” 50.80 1.60 180.00 54.00 126.00 2.1/2” 63.50 1.60 200.00 60.00 140.00 3” 76.10 1.60 250.00 75.00 175.00 4” 101.60 2.00 300.00 90.00 210.00

SWEPT TEE 316L

SIZE A B C D 1” 25.40 1.60 65.00 102.00

1.1/2” 38.10 1.60 85.00 152.00 2” 50.80 1.60 110.00 178.00

2.1/2” 63.50 1.60 135.00 200.00 3” 76.10 1.60 155.00 250.00 4” 101.60 2.00 195.00 350.00

DOUBLE SWEPT TEE, REDUCING SWEPT TEES ETC. AVAILABLE ON REQUEST. ALL ABOVE CAN BE MANUFACTURED UP TO 8” DIAMETER

HSS23


-22-

SERRATED HOSE TAILS 1/2” - 4”

16 GAUGE 10 GAUGE 16 / 10 GAUGE HOSE TAIL 316L

A B C D E 1/2” 50.00 25.00 1.60 N/A 3/4” 50.00 25.00 1.60 N/A 1” 75.00 50.00 1.60 3.00 1.1/2” 75.00 50.00 1.60 3.00 2” 75.00 50.00 1.60 3.00 2.1/2” 75.00 50.00 1.60 3.00 3” 75.00 50.00 1.60 3.00 4” 100.00 75.00 2.00 3.00

RJT HOSE LINER 316L

A B C D

1” 87.00 50.00 1.60 / 3.00

1.1/2” 87.00 50.00 1.60 / 3.00

2” 87.00 50.00 1.60 / 3.00

2.1/2” 87.00 50.00 1.60 / 3.00

3” 87.00 50.00 1.60 / 3.00

4” 112.00 75.00 2.00 / 3.00

RJT HOSE MALE 316 A B C D 1” 100.00 50.00 1.60 / 3.00 1.1/2” 100.00 50.00 1.60 / 3.00 2” 100.00 50.00 1.60 / 3.00 2.1/2” 100.00 50.00 1.60 / 3.00 3” 100.00 50.00 1.60 / 3.00 4” 125.00 75.00 1.60 / 3.00

STANDARD HOSE FERRULE 316L

SIZE A B C 1/2” 12.70 25.40 71.50 3/4” 19.05 25.40 71.50 1” 25.40 50.40 97.50 1.1/2” 38.10 50.40 97.50 2” 50.80 64.00 97.50 2.1/2” 63.50 77.50 97.50 3” 76.10 91.00 97.50 4” 101.60 119.00 122.50

HOSE TAILS ALSO AVAILABLE WITH IDF, SMS, DIN ENDS ETC.

HSS24


V-TEK BUTTERFLY VALVES 1” - 4”

BUTTERFLY VALVE B.S. BUTT WELD ENDS 316L

SIZE A B C D E 1” 22.10 25.40 34.00 79.00 61.00 1.1/2” 34.70 38.10 38.00 85.00 64.30

2” 47.60 50.80 40.00 105.00 74.30 2.1/2” 60.20 63.50 40.00 112.00 77.60 3” 72.00 76.20 41.00 125.00 84.30 4” 97.60 101.60 50.00 157.00 101.60

BUTTERFLY VALVE

RJT MALE ENDS 316L

SIZE A B C D E 1” 22.20 45.72 34.00 79.00 61.00 1.1/2” 34.82 58.42 38.00 85.00 64.30 2” 47.52 72.72 40.00 105.00 74.30 2.1/2” 60.20 85.42 40.00 112.00 77.60 3” 72.90 98.12 41.00 125.00 84.30 4” 97.69 123.52 50.00 157.00 101.60

BUTTERFLY VALVE B.S. CLAMP FERRULED ENDS 316L

SIZE A B C D E 1” 22.20 50.50 55.00 79.00 61.00 1.1/2” 34.90 50.50 59.00 85.00 64.30 2” 47.60 64.00 61.00 105.00 74.30 2.1/2” 60.30 77.50 61.00 112.00 77.60 3” 73.00 91.00 62.00 125.00 84.30 4” 97.60 119.00 71.00 157.00 101.60

BUTTERFLY VALVES AVAILABLE ALSO WITH IDF, SMS, DIN ENDS ON REQUEST.

HSS25


-24-

V-TEK BUTTERFLY VALVE HANDLES

PULL HANDLE (4 POSITIONS) 304

Construction:- Stainless Steel 304 handle with Phenolicknob. Machined and polished for sanitary use.

To Operate:- Pull handle to disengage, rotate to required required position, release handle and plunger will lock in one of

the 4 radial holes selected.

LEVER HANDLE (12 POSITIONS)

Handle:- Nylon 6+Glass Fibre reinforced .

Gripper Bar and Notch Plate:- Stainless Steel 304.Aesthetic design with spring loaded lever bar whichcan be locked in any 12 positions on the notch plate. Can be supplied with a hole drilled in the lever bar to allow a padlock to be fitted for tamperproof lockapplications.

STAINLESS STEEL LEVER HANDLE (12 POSITIONS)

Handle:- 304 Stainless SteelGripper Bar and 12 Position Notch Plate:- Stainless Steel 304.

Aesthetic design with spring loaded lever bar which can be locked in any 12 positionson the notch plate.

Can be supplied with a hole in the lever bar to allow a padlock to be fitted for tamperproof lock applications.

HSS26


V-TEK BUTTERFLY VALVE ASSESSORIES 1” - 4”

BUTTERFLY VALVE DISC 316L

SIZE A B C D 1” 22.50 61.00 96.50 12.00 1.1/2” 36.00 64.30 103.00 12.00 2” 50.00 74.30 123.00 12.00 2.1/2” 60.00 77.60 130.00 12.00 3” 70.50 84.80 143.00 12.00 4” 100.00 101.60 180.60 16.00

BUTTERFLY VALVE SEALS -

EPDM ( BLACK , WHITE )

VITON ( GREEN )

SILICONE ( RED )

SIZE A B D 1” 21.50 38.50 23.00 1.1/2” 34.50 51.50 23.00 2” 48.50 65.50 23.00 2.1/2” 59.50 76.50 23.00 3” 70.00 89.00 25.00 4” 99.00 121.00 29.00

SEAL MATERIAL PROPERTIES PROPERTY EPDM VITON SILICONE TEMPERATURE RANGE -48 TO 135 C -29 TO 204 C -62 TO 232 C ACID RESISTANCE GOOD-EXCELLENT GOOD GOOD ALKALI RESISTANCE GOOD-EXCELLENT POOR-GOOD POOR-FAIR PETROLEUM OIL RESISTANCE POOR EXCELLENT GOOD VEGETABLE OIL RESISTANCE GOOD EXCELLENT GOOD ABRASION RESISTANCE GOOD-EXCELLENT GOOD GOOD-EXCELLENT COMPRESSION SET FAIR GOOD-EXCELLENT GOOD-EXCELLENT

HSS27


-26 -

V-TEK BUTTERFLY VALVE ACTUATOR

PNEUMATIC ACTUATOR FAIL SAFE AIR / SPRING FOR USE ON 1” - 3” V-TEK BUTTERFLY VALVE

MOUNTING BRACKET ACCOMMODATES INDUCTIVE PROXIMITY SWITCHES

NO DESIGNATION QTY 1 ACTUATION CYLINDER 1 2 AIR SUPPLY INLET 1 3 AIR OUTLET FILTER/SILENCER 1 4 MOUNTING BRACKET 1 5 PLASTIC POSITION INDICATOR 1 6 DRIVE ADAPTOR 1 7 PROXIMITY SWITCH 2 8 MOUNTING BOLTS 2

SHUT-OFF TIME:- 1.5 SECONDS

WEIGHT:- 3.85KG

TORQUE:- 16 Nm AT 5 BAR SUPPLY

CONSUMPTION:- 0.266 LITRE AT 5 BAR

MATERIAL:- AISI 304 STAINLESS STEEL

SIZE H 1” 273.60 1.1/2” 276.90 2” 286.70 2.1/2” 290.00 3” 296.80 4” A.O.R.

THE ACTUATOR CAN BE CONVERTED FROM AIR / SPRING TO DOUBLE ACTING AIR / AIR TYPE BY REMOVING CYLINDER COMPRESSION SPRINGS AND SUPPLYING AIR TO THE EXHAUST PORT ON THE BASE PLATE AS THE SECOND AIR SUPPLY PORT TO THE CYLINDER.

PROXIMITY SWITCHES AVAILABLE – IF5718 24 VOLT D.C. ALSO NF5004 INTRINSICALLY SAFE.

SOLENOID VALVES AVAILABLE - SMC 24 VOLT D.C. ( DETAILS AVAILABLE ON REQUEST )

4” ACTUATORS ALSO IN STOCK , DETAILS AVAILABLE ON REQUEST

HSS28


HSS29

No Description Quant. Material

1 SPRING CLIP 2 STEEL (2)

2 DOUBLE ACTING CAP 2 ALUMINIUM ALLOY

3 CAP O-RING 2 N.B.R.

4 PISTON 2 POLYARILAMIDE

5 CYLINDER 1 ALUMINIUM ALLOY (2)+(1)

6 WASHER 1 POLYAMIDE 6

7 SPRING CLIP 1 STEEL (3)

8 PISTON INDICATOR 1 POLYAMIDE

9 PISTON GUIDE 2 POLYACETAL

10 GUIDE RING 2 POLYACETAL

11 PISTON 0-RING 2 N.B.R.

12 0-RING 2 N.B.R.

13 O-RING 2 N.B.R.

14 SPRING SET 1 DIN-17223-C (2) (4)

15 SPRING RETURN CAP 2 ALUMINIUM ALLOY (1)

16 SHAFT 1 AISI-303 STAINLESS STEEL

17 GEAR 1 ALUMINIUM ALLOY (2)

ALUMINIUM PNEUMATIC ACTUATOR

P10: DOUBLE ACTINGP10S: SPRING RETURN

(1) COVERED WITH POLYAMIDE.

(2) COVERED BY CATAPHORESIS.

(3) COVERED WITH NIKEL-P.T.F.E.

(4) VARIABLE QUANTITY, PLEASE SEE THE SPRING RETURN TORQUE CHART.


V-TEK NON RETURN VALVES 1/2” - 4”

V-TEK NON RETURN VALVES HAVE A UNIQUE SANITARY DESIGN ENABLING VERY HIGH FLOW RATES THROUGH THE VALVE AND SIMPLE IN-LINE DISMANTLING.

MATERIALS: BODY - FORGED 316L STAINLESS STEEL

DISC - BAR 316L STAINLESS STEEL SEALS - EPDM, SILICONE, VITON.

NON-RETURN VALVE BS BUTT WELD END 316L

SIZE A B C D E �1/2” 9.50 12.70 47.00 34.00 23.00 3/4” 15.80 19.00 67.00 45.00 30.00 1” 22.20 25.40 80.00 59.00 38.00 1.1/2” 34.90 38.10 93.00 59.00 38.00 2” 47.60 50.80 106.00 59.00 38.00 2.1/2” 60.30 63.50 123.00 59.00 38.00 3” 73.00 76.20 136.00 59.00 38.00 4” 97.60 101.60 166.00 60.00 57.00

NON-RETURN VALVE BS CLAMP FERRULED ENDS 316L

SIZE A B C D E �1/2” 9.50 25.40 47.00 55.50 44.50 3/4” 15.80 25.40 67.00 66.50 51.50 1” 22.20 50.80 80.00 80.50 59.50 1.1/2” 34.90 50.80 93.00 80.50 59.50 2” 47.60 63.30 106.00 80.50 59.50 2.1/2” 60.30 76.20 123.00 80.50 59.50 3” 73.00 91.00 136.00 80.50 59.50 4” 97.60 119.00 166.00 81.50 78.50

SERVICE RATINGS :

1” - 3” MAXIMUM PRESSURE = 15 BAR

4” MAXIMUM PRESSURE = 10 BAR

THESE RATINGS DEPEND ON TYPE OF SEAL USED AND TEMPERATURE

SIZE �1/2” 3/4” 1” 1.1/2” 2” 2�.1/2” 3” 4” OPENING PRESSURE (BAR) 0.5 0.5 1 1 1 1 1 1.5

NON RETURN VALVES ALSO AVAILABLE WITH RJT, IDF, SMS, DIN ENDS ON REQUEST.

HSS30


-29 -

V-TEK IN LINE SIGHT GLASSES 1/2” - 4”

V-TEK SIGHT GLASSES ARE DESIGNED FOR EASE OF ASSEMBLY / DISASSEMBLY USING PYREX BOROSILICATE GLASS WHICH IS A LOW ALKALI BOROSILICATE HEAT RESISTANCE GLASS

MATERIALS : SERVICE RATINGS :

FLANGES - FORGED 316L STAINLESS STEEL �1/2” - 3” MAXIMUM PRESSURE = 15 BAR

GLASS - PYREX BOROSILICATE 4” MAXIMUM PRESSURE = 10 BAR

SEALS - EPDM, SILICONE, VITON

SIGHT GLASS BS BUTT WELD ENDS 316L

SIZE A B C D E 1/2” 9.50 12.70 106.00 47.00 10.00 3/4” 15.80 19.00 106.00 47.00 17.00 1” 22.20 25.65 148.00 79.00 26.00 1.1/2” 34.90 38.35 156.00 85.00 34.00 2” 47.60 51.05 160.00 105.00 50.00 2.1/2” 60.30 63.75 160.00 112.00 65.40 3” 73.00 76.45 162.00 125.00 75.40 4” 97.60 101.85 168.00 157.00 100.00

SIGHT GLASS

BS RJT MALE ENDS 316

SIZE A B C D E 1” 22.20 45.72 198.00 79.00 26.00 1.1/2” 34.90 58.42 206.00 85.00 34.00 2” 47.60 72.72 210.00 105.00 50.00 2.1/2” 60.30 85.42 210.00 112.00 65.40 3” 73.00 98.12 212.00 125.00 75.40 4” 97.60 123.52 218.00 157.00 100.00

SIGHT GLASS

BS CLAMP FERRULED ENDS 316L

SIZE A B C D E 1” 22.10 50.50 191.00 79.00 26.00 1.1/2” 34.70 50.50 199.00 85.00 34.00 2” 47.60 64.00 203.00 105.00 50.00 2.1/2” 60.20 77.50 203.00 112.00 65.00 3” 72.00 91.00 205.00 125.00 75.40 4” 97.60 119.00 211.00 157.00 100.00

SIGHT GLASSES ALSO AVAILABLE WITH IDF, SMS, DIN ETC. ENDS ON REQUEST

HSS31


- 30 -

SANITARY 2 WAY 3 PIECE BALL VALVES 1/2” - 4”

STAINLESS STEEL SS304, 316, 316L

• FULL BORE 3 PIECE HYGIENIC CONSTRUCTION. • SUITABLE FOR PNEUMATIC / ELECTRICAL ACTUATION

MOUNTED ON ISO 5211 FLANGE. • LONG WELDING ENDS SUITABLE FOR ORBITAL

WELDING.• LOCKING DEVICE FOR OPEN / CLOSED POSITIONS. • ANTI-BLOWOUT STEM DESIGN. • AVAILABLE WITH ANY FITTING OR FLANGE

CLAMP\RJT\IDF\SMS\DIN\ISO\ASA.• BALL ENCAPSULATED WITH PTFE LINER.

Valve size A B C D E F

½" 9.5 12.7 20.0 89.0 52 100

¾" 15.9 19.1 20.0 101.0 57 131

1" 22.2 25.4 20.0 114.0 60 131

1 ½" 35.0 38.2 20.0 140.0 90 187

2" 47.6 50.8 20.0 156.0 102 187

2 ½" 60.2 63.4 20.0 197.0 140 260

3" 73.0 76.2 20.0 229.0 155 260

4" 97.4 101.6 20.0 241.0 180 290

HSS32


-31-

SANITARY 3 WAY BALL VALVES 1/2” - 2” ( L PORT AND T PORT )

STAINLESS STEEL SS304, 316, 316L

• HYGIENIC CONSTRUCTION. • SUITABLE FOR PNEUMATIC / ELECTRICAL ACTUATION

MOUNTED ON ISO 5211 FLANGE. • LONG WELDING ENDS SUITABLE FOR ORBITAL

WELDING.• (T,L, +) = PORT OPTIONS AVAILABLE. • ANTI-BLOWOUT STEM DESIGN. • AVAILABLE WITH ANY FITTING OR FLANGE

CLAMP\RJT\IDF\SMS\DIN\ISO\ASA.• BALL ENCAPSULATED WITH PTFE LINER. • DIN-3337 / ISO-5211 MOUNTING HOLE LAYOUT

Valvesize

ISO – 5211 A B C D E F G

½" F03/F04 9.5 12.7 20.0 118.0 78 44.5 121

¾" F03/F04 15.8 19.1 20.0 127.0 82 48.0 121

1" F04/F05 22.2 25.4 25.0 152.4 90 59.0 137

1 ½" F05/F07 35.0 38.2 25.0 175.0 110 72.0 182

2" F05/F07 47.6 50.8 25.0 190.0 115 82.0 182

2 ½" F07/F10 60.0 63.4 25.0 228.0 108 100.0 370

3" F10/F12 73.0 76.2 25.0 260.0 134 125.5 400

4" F10/F12 97.4 101.6 50.0 318.0 156 135.5 400

HSS33


-32-

PIPE HANGERS & ACCESSORIES BKS CLIP Round Hinged Hanger With

½” BSP ROUND SOCKET 304

SIZETUBEO.D. A

mm

B

mm½” 12.7 47.5 ¾” 19.0 47.5 1” 25.4 47.5

1½” 38.1 54.0 2” 50.8 60.0

2½” 63.5 66.5 3” 76.2 73.0

3 ½" 88.9 79.0 4” 101.6 85.5

4 ½" 114.3 92.0

½" & ¾" PIPE SIZES USE 1" CLIP WITH INSERT.

Inserts available for tube up to 4" O.D.

BKB CLIP Round Hinged Hanger With

Ø12 x60mm Long Bar. 304 (optional rod lengths available)

SIZETUBEO.D. A

mm

B

mm½” 12.7 75.5 ¾” 19.0 75.5 1” 25.4 75.5

1½” 38.1 82.0 2” 50.8 88.0

2½” 63.5 94.5 3” 76.2 101.0

3 ½" 88.9 107.0 4” 101.6 113.5

4 ½" 114.3 120.0



BKT CLIP Round Hinged Hanger With

Ø12 Tube. 304

SIZETUBEO.D. A

mm

B

mm½” 12.7 90.0 ¾” 19.0 90.0 1” 25.4 90.0

1½” 38.1 90.0 2” 50.8 90.0

2½” 63.5 90.0 3” 76.2 90.0

3 ½" 88.9 90.0 4” 101.6 90.0

4 ½" 114.3 90.0



HSS34


-33-

DOUBLE BOLTED PIPE CLIPS OD ½” - 6”

THE OD PIPE CLIP COMES WITH A BLUE OR ORANGE INSERT.

INSERT IS 2.5MM THICK TO ACCOMMODATE O.D. TUBE SIZE

SIZE A B C D E F G - WT H I ½” 18.00 90.00 25.00 3.00 3.00 85.00 19.00 / 1.60 63.00 M8 ¾” 24.00 90.00 25.00 3.00 3.00 85.00 19.00 / 1.60 63.00 M8 1” 30.00 90.00 25.00 3.00 3.00 85.00 19.00 / 1.60 63.00 M8

1.1/2” 43.00 90.00 25.00 3.00 3.00 100.00 19.00 / 1.60 78.00 M8 2” 56.00 90.00 25.00 3.00 3.00 115.00 19.00 / 1.60 93.00 M8

2.1/2” 69.00 90.00 25.00 3.00 3.00 127.00 19.00 / 1.60 105.00 M8 3” 81.00 90.00 25.00 3.00 3.00 144.00 19.00 / 1.60 122.00 M8 4” 106.00 90.00 25.00 3.00 3.00 170.00 19.00 / 1.60 148.00 M8 5” 130.00 130.00 25.00 3.00 3.00 195.00 19.00 / 1.60 172.00 M8 6” 155.00 145.00 25.00 3.00 3.00 217.00 19.00 / 1.60 192.00 M8

HSS35


-34-

TUBE , BOX SECTION , BAR AND ANGLE

TUBE – To ASTM A269 / 270 and Din 11850 , Bead Removed , Fully Annealed and Unannealed ,Descaled and Polished in grades 316L and 304.

SIZE OD(MM) W/T(MM) ½” 12.70 1.50 ¾” 19.05 1.50 1” 25.40 1.50/1.60/3

11/4” 31.80 1.50/1.60 11/2” 38.10 1.50/1.60/3

2” 50.80 1.50/1.60/3 21/2” 63.50 1.50/1.60/3

3” 76.20 1.50/1.60/3 4” 101.60 2.00

BOX SECTION - To ASTM A554 polished in grade 304 , rectangular and grade 316 available on request along with oter sizes which are not shown.

SIZE W/T (MM) 25 X 25 1.50 / 2.00 30 X 30 1.50 / 2.00 40 X 40 1.50 / 2.00 / 3.00 50 X 50 1.50 / 2.00 / 3.00 80 X 80 2.00 / 3.00

100 X 100 2.00 / 3.00

FLAT BAR - To BS970 Pt 4 grade 304 is kept in stock , 316 and various other sizes available on request

SIZE W/T (MM) 25 3.00 / 5.00 / 6.00 30 3.00 / 5.00 / 6.00 40 3.00 / 5.00 / 6.00 50 3.00 / 5.00 / 6.00 75 3.00 / 5.00 / 6.00

100 3.00 / 5.00 / 6.00

ANGLE – To BS970 Pt 1 grade 304 is kept in stock , 316 and various other sizes available on request

SIZE W/T ( MM ) 25 3.00 / 5.00 / 6.00 40 3.00 / 5.00 / 6.00 50 3.00 / 5.00 / 6.00

ROUND BAR – To BS 970 Pt 4 grade 304 is kept in stock , 316 and various other sizes including imperialavailable on request

SIZE ( MM) 4568

1012162025

HSS36

BOX SECTION - To ASTM A554 polished in grade 304, rectangular and grade 316 availableon request along with other sizes which are not shown.


-35-

FLANGES – TABLE E , PN16 AND ASA150 LB 1” – 4”

TABLE E FLANGES BORED OD AND BLIND 316L

SIZE FLANGE DIA THICKNESS PCD NO OF BOLT HOLES

DIA OF BOLT HOLES

1” 114.30 7.15 82.55 4 14.29 11/2” 133.35 8.63 98.29 4 14.29

2” 152.40 9.53 114.30 4 17.46 21/2” 165.10 10.32 127.00 4 17.46

3” 184.15 11.11 146.05 4 17.46 4” 215.90 12.70 177.80 8 17.46

PN16 FLANGE BORED OD AND BLIND 316L


DIA OF BOLT HOLES

1” 115.00 16.00 85.00 4 14.00 11/2” 150.00 16.00 110.00 4 18.00

2” 165.00 18.00 125.00 4 18.00 21/2” 185.00 18.00 145.00 4 18.00

3” 200.00 20.00 160.00 8 18.00 4” 220.00 20.00 180.00 8 18.00

ASA 150LB FLANGED BORED OD AND BLIND 316L


DIA OF BOLT HOLES

1” 107.60 14.30 79.40 4 12.70 11/2” 127.00 17.50 98.40 4 12.70

2” 152.40 19.00 120.60 4 15.90 21/2” 177.80 22.20 139.70 4 15.90

3” 190.50 23.80 152.40 4 15.90 4” 228.60 23.80 190.50 8 15.90

TABLE D , F AND H

PN10 , 25 AND 40

ASA 300LB , 600LB

ALL ABOVE FLANGES AVAILABLE ON REQUEST ALONG WITH FLANGE CHARTS

HSS37


-36-

BSP FITTINGS . NOMINAL BORE PIPE AND FITTINGSAND METRIC TUBE AND FITTINGS

BSP FITTINGS AVAILABLE FROM STOCK IN 316

Y - YES N - NO * - AVAILABLE ON REQUEST

BSP 150LB FITTINGS 1/8” ¼” 3/8” ½” ¾” 1” 11/4” 11/2” 2” 21/2” 3” FULL SOCKETS Y Y Y Y Y Y Y Y Y Y Y HALF SOCKETS Y Y Y Y Y Y Y Y Y Y Y

SHORT WELD NIPPLES Y Y Y Y Y Y Y Y Y Y Y BARREL NIPPLES Y Y Y Y Y Y Y Y Y Y Y

HEXAGON NIPPLES Y Y Y Y Y Y Y Y Y * * HEXAGON HEADED PLUGS Y Y Y Y Y Y Y Y Y * * SQUARE HEADED PLUGS Y Y Y Y Y Y Y Y Y * *

HEXAGON REDUCING BUSHES N Y Y Y Y Y Y Y Y * * HEXAGON REDUCING NIPPLES N Y Y Y Y Y Y Y Y * *

REDUCING SOCKETS N Y Y Y Y Y Y Y Y * * HEXAGON CONE SEAT UNION Y Y Y Y Y Y Y Y Y * *

HEXAGON HOSE TAILS N Y Y Y Y Y Y Y Y * * 90 DEGREE F / F ELBOWS Y Y Y Y Y Y Y Y Y * * 90 DEGREE M /F ELBOWS Y Y Y Y Y Y Y Y Y * *

EQUAL TEES F/F/F Y Y Y Y Y Y Y Y Y * * ROUND CAP Y Y Y Y Y Y Y Y Y * *

HEXAGON CAP Y Y Y Y Y Y Y Y Y * * 1 PIECE RED BORE BALL VALVE N Y Y Y Y Y * Y Y * * 2 PIECE FULL BORE BALL VALVE N N Y Y Y Y * * * * * 3 PIECE FULL BORE BALL VALVE N N Y Y Y Y * * * * *

NOMINAL BORE PIPE AND FITTINGS AVAILABLE FROM STOCK IN 316L

½” ¾” 1” 11/2” 2” SHD 10 WELDED PIPE Y Y Y * * SHD 40 WELDED PIPE Y Y Y Y Y

SHD 10 90 L/R ELBOWS Y Y Y * * SHD 40 90 L/R ELBOWS Y Y Y * *

SHD 10 EQUAL TEES Y Y Y * * SHD 40 EQUAL TEES Y Y Y * * SHD 10 CON REDS Y Y Y * * SHD 40 CON REDS Y Y Y * *

METRIC TUBE AND FITTINGS AVAILABLE FROM STOCK IN 316L

100 150 200 TUBE (2MM WALL) Y Y Y

90 ELBOWS (D + 100 RAD) Y Y Y PULLED TEES Y Y Y

CON REDS Y Y Y

SEAMLESS METRIC TUBE AVAILABLE FROM STOCK IN 316L

6 X 1.5MM , 8 X 1.5MM , 10 X 1.5MM , 12 X 1.5MM , 15 X 1.5MM , 20 X 1.5MM

CUT PIECES OF ALL ABOVE TUBES AVAILABLE ON REQUEST

SEAMLESS METRIC TUBE AVAILABLE FROM STOCK IN 316L

6 X 1.5MM , 8 X 1.5MM , 10 X 1.5MM , 12 X 1.5MM , 15 X 1.5MM , 20 X 1.5MM

CUT PIECES OF ALL ABOVE TUBES AVAILABLE ON REQUEST

METRIC TUBE AND FITTINGS AVAILABLE FROM STOCK IN 316L

NOMINAL BORE PIPE AND FITTINGS AVAILABLE FROM STOCK IN 316L

HSS38


V-TEK HYGIENIC FILTERS

THE COMPLETE RANGE OF STAINLESS STEEL SANITARY FILTERS FOR THE BIOTECHNOLOGY , PHARMACEUTICAL , BREWING , DAIRY AND FOOD PROCESSING INDUSTRIES.

FILTER BODY DESIGN OPTIONSV-Tek hygienic filters are available from stock in three different designs, Y- type , In-line and 90 degree with all bodies manufactured from 316L

stainless steel. Designed with the operative in mind , the simple yet robust assembly is easily maintained as the filter can be assembled / disassembled without any tools. The filter bodies are manufactured with optional end connections and are supplied with various polished finishes

inside and outside (see technical details).

Y - TYPE IN-LINE 90 DEGREE

FILTER ELEMENT A stronge wire screen element manufactured from 316L stainless steel welded and polished provide a much

stronger filtration unit than woven mesh which tends to collapse under pressure. The filter is designed to work with a flow direction from the outside to the inside with a maximum working pressure of 10 bar .

This makes it ideal for C.I.P / S.I.P. but can be also cleaned by hand or back flushed and will not collapse if accidental reverse flow takes place. A metal to metal seating arrangement eliminates potential leakage problems , with the

clamp gasket being the only seal . Gaskets are available in various materials depending on application.

Available from stock from 10 micron to 1500 micron .

V-TEK FILTERS TECHNICAL DETAILS PLAIN ENDS TRI - FERRULES RJT M/M IDF M/M SMS M/M DIN M/M

A B C A B C A B C A B C A B C A B C Y-TYPE 1” 337 185 - 380 185 - 391 185 - 380 185 - 375 185 - 395 185 - Y-TYPE 11/2” 355 195 - 398 195 - 409 195 - 398 195 - 401 195 - 421 195 - Y-TYPE 2” 372 190 - 415 190 - 426 190 - 415 190 - 418 190 - 442 190 - Y-TYPE 21/2” 479 210 - 522 210 - 529 210 - 522 210 - 533 210 - 559 210 - Y-TYPE 3” 397 210 - 440 210 - 447 210 - 440 210 - 446 210 - 442 210 - IN-LINE 1” 355 130 - 398 130 - 409 130 - 398 130 - 393 130 - 413 130 - IN-LINE 11/2” 355 130 - 398 130 - 409 130 - 398 130 - 401 130 - 421 130 - IN-LINE 2” 355 130 - 398 130 - 409 130 - 398 130 - 401 130 - 425 130 - 90-DEG 1” 399 263 43 420 284 64 453 290 70 420 284 64 418 282 62 428 292 72 90-DEG 11/2” 399 263 43 420 284 64 453 290 70 420 284 64 422 286 66 432 296 76 90-DEG 2” 399 263 43 420 284 64 453 290 70 420 284 64 422 286 66 434 298 78 90-DEG 21/2” 441 291 106 462 312 127 466 316 131 462 312 127 468 318 133 481 331 146 90-DEG 3” 400 250 65 421 271 86 425 275 90 421 271 86 427 277 92 445 295 110

Please note - Allow 300mm for extraction of element.

End connections available - Construction materials -

- 1” TO 3” butt weld od , RJT , IDF , SMS , DIN , - Body - 316 / 316L s/s - Clamp Ferruled , BSP or any other option required. - Filter Element - 316L s/s - Filter Body Seal - EPDM , Silicone , Viton , PTFE , Gylon - Other materials available on request.

Element Micron ratings available from stock Body Finishes available inside and outside –

10 micron ( 0.01 mm ) 20 micron (0.02mm ) - Glass bead blast - 100 micron ( 0.10 mm ) - 220 grit ( 0.5 Ra )- 150 micron ( 0.15mm ) - mirror polish - 250 micron ( 0.25 mm ) - Electropolished -

500 micron ( 0.50 mm ) 1000 micron (1.00 mm )

1500 micron ( 1.50 mm ) 2000 micron ( 2.00 mm )

DETAILED FLOW RATE CHARTS AVAILABLE ON REQUEST.

HSS39


V-TEK PUMP PROTECTION STRAINERS

3MM OR 5MM BASKETS AVAILABLE FROM STOCK. OTHER BASKET SIZES AVAILABLE.

WELD , RJT , IDF , SMS , DIN , CLAMP ENDS AVAILABLE CAN ALSO BE USED WITH WEDGE WIRE SCREEN ELEMENTS WHEN A SMALLER FILTER IS REQUIRED.

A (BUTTWELD)

B

1” 223 290

11/2” 165 280

2” 222 300

HSS40

L

es

2 6 8 6 0


TANK CLEANING EQUIPMENT

SPRAY BALLS

Typical Dimensions of HY 44 / 56 spray ball Typical Installation of HY 44 / 56 spray ball A – 58mm A – 12” (305mm) B – 35mm B – 10 foot (3.05m) C – 64mm

D – 2.8mm (R clamp fixing) E – 26mm id

RANGE OF SPRAY BALLS AVAILABLE

TYPE INLET DIAMETER HOLE SIZE COVERAGE S 0.75” 1.50” 1/16” 360°

HY44 1.0” 2.50” 1/16” 360° LT32 1.0” 2.50” 1/16” 180° UP HY56 1.0” 2.50” 3/32” 360° LT38 1.0” 2.50” 3/32” 180° UP FV 1.0” 2.50” 3/32” 180° DOWN

LT44 1.0” 2.50” 1/8” 180° UP HYE44 1.50” 2.50” 1/16” 360° HYE56 1.50” 2.50” 3/32” 360°

FC 1.50” 2.50” 3/32” + SLOTS 180° SIDESPRAY SB 1.50” 3.50” 3/32” 360° V 1.50” 3.50” 3/32” 180° SIDESPRAY H 1.50” 3.50” 3/32” + SLOTS 180° SIDESPRAY

SBE 2.0” 3.50” 3/32” 360°

CLIP DISC 100

Clip discs are manufactured from 316 stainless steels with a PVDF rotating discs. Different materials on the disc can also be offered for harsher environments.

Temperature rating if 120°C max.

Clip Disc 150 can also be offer to suit 11/2” od Tube. Details available on request.

PRESSURE FLOWRATE RADIUS BAR PSI L/MIN GALL/MIN M FT 1.4 20 93 20 2.7 9 2.1 30 105 23 3.0 10 2.8 40 124 27 2.7 9 3.5 50 131 29 2.4 8

HSS41


HSS

NEW PRODUCTS

V-TEK PUMP PROTECTION STRAINERS Now available from stock , 1” , 11/2” and 2” (see page 40)

TANK WASHING EQUIPMENT A range of Spray balls and Clip Disc tank washers (see page 41)

COMPRESSION FITTINGS A full range of single and twin ferruled fittings from 6mm to 15mm including

Stud couplings , straight connectors , elbows and tees etc

GYLON BIO PRO CLAMP GASKETS A full range of clamp gaskets from ½” to 4” available from stock

( for details see page 17 )

STAINLESS STEEL HANDRAILING SYSTEMS A range of push fit handrail fittings in 11/2” and 2” diameter (coming soon)

DIN UNIONISED TANK SIGHT GLASSES Unionised tank sight glasses available in 50mm , 65mm and 100mmn

DOMED END REDUCERS A full range of domed end reducers for jacketed pipework from 11/2” x 1” to 4” x 3” in 316L s/s

DOMED WELD ENDSDomed weld ends for ornamental or hygienic tube , used for capping off pipework or handrailing in 316L s/s

BSP / O.D. WELD ADAPTORS 1” , 11/2” and 2” BSP taper male to Butt weld O.D. adaptors with flats for spanner in 316L s/s

MISCELLANEOUS STOCK AND SERVICES

TO COMPLIMENT OUR FULL STOCK RANGE THE FOLLOWING LIST INDICATES SOME OF THE ADDITIONAL ITEMS STOCKED OR THAT CAN BE OBTAINED ON REQUEST.

STAINLESS STEEL CHAIN DOMED WELDING ENDS GAUGES – PRESSURE AND TEMPERATURE STAINLESS STEEL JUBILEE CLIPS STAINLESS STEEL MESH – WELDED AND WOVEN STAINLESS STEEL NUTS , BOLTS PICKLING PASTE PLASTIC END CAPS – ROUND AND SQUARE SHEET , PLATE ( CUT TO SIZE ) PLUG COCK VALVES SAMPLE COCK VALVES SAW BLADES ( G.F. AND HACKSAW ) SOCKET WELD FITTINGS 150LB AND 3000LB CHERRY BURRELL FITTINGS CONICAL STRAINERS ( RJT AND IDF ) DIAPHRAGM VALVES WAFER PATTERN BUTTERFLY VALVES WAFER PATTERN CHECK VALVES

GLASS CONNECTORS STAINLESS STEEL ADJUSTIBLE FEET GLASS BEAD BLASTING CAMLOC FITTINGS

DIN 11864 ACEPTIC UNION 316LTRI-CLAMP ACEPTIC UNION 316L

HOSES – BRAIDED METALLIC , PVC , FOOD QUALITY EPDM , SILICONE , PTFE LINED All above hoses available on request with a short turn round in sizes from ½” to 4”

42HSS


HSS43

NOTES


23216 HSS Cover.qxd:30773-5 HSS Cover 17/3/09 10:51 Page 3

Unit 8, Charnley Fold Lane, Bamber Bridge, Preston, Lancs, PR5 6PSTel: 01772 315277 Fax: 01772 626011

http://www.hss-ltd.co.uk e.mail: [email protected]

Important information: Hygienic Stainless Steels Limited owns the copyright and design of this catalogue and no part of this cataloguemay be copied or reproduced unless the written permission of Hygienic Stainless Steels is obtained. All copyrights reserved.

All drawing and design information was correct at time of publication and is subject to change without notification.

3rd Edition

23216 HSS Cover.qxd:30773-5 HSS Cover 17/3/09 10:51 Page 4

10384 hss cat - hygienic stainless · pdf filehss hygienic stainless steels ltd contents ......

Documents