10/6/05, page 1 barco events training large venue projector operations

32
10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

Upload: lauren-bradley

Post on 24-Dec-2015

224 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05, page 1

BARCO Events Training

Large Venue Projector Operations

Page 2: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 2

FLM Operations Training

• Overview of Specifications• Installation• Remote and Local Keypad• Connections• Lens Adjustment• Software Update• Maintenance• Menu Overview

Page 3: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 3

Overview of Specifications

FLM R20+ SXGA+ 1400 x 1050 20,000 Lumen

FLM HD18 HD 1920 x 1080 18,000 Lumen

- High Light Output, Stackable, Blendable - Three Chip Sealed DMD Engine- 1800 : 1 Contrast Ratio , 2400 : 1 in High Contrast Mode- Easy install Xenon lamp module. ( 3kW / 3.5kW )- Liquid cooling for optics and DMDs.- Modular design ( i.e. Inputs, Electronics Box, PS, DMD Engine )

- New Projector Control GUI ( Projector Toolset via IP Network )

Page 4: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 4

Installation

• Installation Guidelines– General– Configuration– Safety Area Around the Projector– Projector Tilting– Lamp Installation– Lensing– Stacking Projectors– Rigging and Accessories

Page 5: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 5

General

• Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system.

• Ambient Temperature Conditions– Max. ambient temperature : 40°C or 104 °F– Min. ambient temperature : 10 °C or 50 °F– Storage temperature: -35°C to +65°C (-31°F to 149°F)

• Humidity Conditions– Storage: 0 to 98 % RH Non-condensing– Operation: 0 to 95 % RH Non-condensing

• Environment– Do not install next to heat sources– Free flowing clean air – no air inlet or exhaust obstructions.– Non-contaminated environment

Page 6: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 6

Configuration

• Screen Size - The projector is designed for projecting an image size : 1 meter width (3.3 ft.) to maximum 18 meter width (59 ft.) (depending on the ambient light conditions), with an aspect ratio of 4 to 3 (recommended between 1 m (3.3 ft) - 12 m (39.4 ft)

• The projector should be installed perpendicular with the screen and leveled in both directions.

• The projector can be installed to project images in four different configurations:

Front/table Rear/tableFront/ceiling Rear/ceiling

Page 7: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 7

Safety Area Around the Projector

Air Inlets and Outlets -

- It is recommended to leave a 1 meter safe area on all sides with no obstructions. Especially near the units rear exhaust.

Page 8: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 8

Projector Tilting

- The FLM can be tilted upward and downward.

- It can be rotated and used in portrait mode also, but it must be in such a way, so that the xenon lamps anode (+) is higher than the lamps cathode (-). This is the general rule for all xenon lamps.

- For the FLM, this would be with the input side downward.

Page 9: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 9

Lamp Installation

1 ) Remove side cover.

2 ) Insert lamp using guide rails.

Page 10: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 10

Lamp Lock Screws

3 ) Screw in Lock Screws to secure lamp.

Page 11: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 11

Z – Axis Adjustment

- Due to Strikes and Normal runtime, the Arcs characteristics will change due to pitting and erosion of the Anode.

- Should be adjusted every 100 hours, every 200 at a minimum. More often if flicker

appears or uniformity is poor. - Z - Axis Finger / Thumb screw Arc (Flaming Ball)

Page 12: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 12

Lensing – Given either the SW (Screen Width), the PD (Projection Distance), or

the Lens Ratio.

• Lens Selection– Determine the approximate position of the projector in the projection room with regard to the

screen and calculate the projection distance (PD).

– Use the lens formulas to find the best corresponding lens ratio with regard to the calculated projection distance for the required screen width.

• Lens Installation– Remove the foam rubber in the opening of the lens holder.

– Take the lens assembly out of its packing material and remove the lens caps on both sides.

– Move the lever or handle of the lens anchor system until the lens locking system is open.

– Insert the lens while lining up the motor connector on the lens with the connector on the lens block, and push until the plates are flat together.

– Move the handle of the lens anchor system to lock the lens into the lens holder.

PD------ = Lens Ratio SW

PD------ = SWLens Ratio

Lens Ratio x SW = PD

Page 13: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 13

Lenses (For HD 18 )

Page 14: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 14

( For R20+ )

Page 15: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 15

Stacking Projectors

• Up to 2 projectors can be stacked on each other without using extra tools or accessories.

Page 16: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 16

• Turn the rigging sockets of the second projector counter clockwise until they are free to move up and down.

• Secure the projectors on each other by bringing the free part of the second projector into the socket of the first projector and turn the wheel a quarter turn clockwise while pushing downwards until it clicks in.

• For ceiling mounted configurations, mount a security cable between the lowest projector and the upper projector.

Page 17: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 17

Rotation

• Tip: Use a white colored hatch pattern for the reference projector and e.g. green colored for the stacked projector. This makes it easier to see the different between both hatch patterns projected.

• Tip: You can increase leverage by using a screw driver in the holes of the adjustment ring

Page 18: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 18

Inclination

Skew

Page 19: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 19

Motorized Lens Shift, Zoom, and Focus

• Best image quality is projected in the On-Axis configuration.• The lens can be shifted with respect to the DMD (P) which result in a shifted image on

the screen (Off-Axis). A 100% shift means that the center point of the projected image is shifted by half the screen size. Due to mechanical and optical limitations it’s recommended to keep the shift values within the field of view (F) as illustrated below. Within these shift ranges the projector and lens perform well.

• Although it is mechanically possible to shift outside the recommended field of view (±120% U/D and ±70% L/R), this will result in a slight decline of image quality depending on the used lens and the zoom position of the lens. Furthermore, shifting too much in both directions will result in a blurred image corner.

Page 20: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 20

Lens Shift Limits ( HD 18 )

Page 21: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 21

Lens Shift Limits ( R20+ )

Page 22: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 22

Rigging Points and Accessories

• Clamps – Slots are made in the carry handle frame for insertion of the double threaded

inserts and for easy adjustment of the clamps position so that this position matches with the rigging points.

Page 23: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 23

Remote and Local Keypad

Page 24: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 24

Connections

• Power connection – 200-240V 50/60Hz ( 16Amps at 230V )

Page 25: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 25

Input source connections ( 4 Input Slots )

FLM comes standard with :

– 5-cable input ( RGBHV, RGBs, RGsB, YUV, CVBS, S-Video )

– Digital Visual Interface (DVI)

– SDI/HDSDI

Page 26: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 26

Communication Interface

Page 27: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 27

• Switching projector on– Press the power switch to switch on the projector.

• It may take about 60 seconds before the completion of several operations

( i.e. cpu boot, software initialization, ... )

– The projector starts in standby mode. – Press Standby key once on the local keypad or on the remote control.

• Switching projector off– First press and hold standby– Let the projector cool down until the fans stop blowing, at least 15 min.– Switch off the projector with the power switch.

Page 28: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 28

Page 29: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 29

• DVI– DVI equalization - Default value = 13– When a DVI module is selected. – For a non DVI-compliant transmitter, stronger equalization may be necessary, even

for shorter cables.– For longer cables adjust between 0 and 13 (more equalization). For shorter cables

adjust between 13 and 15 (least equalization).– Single Link – Compatible with digital input, not analog– Not HDCP compatible

• HDCP Short for high-bandwidth digital-content protection - encrypts the transmission of digital content between the video source and the display.

• SDI/HDSDI - In and Out– Selectable between HDSDI Input 1 or Input 2– Output useful for stacking or to eliminate a D/A when only SDI/HDSDI source is

used

Page 30: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 30

Lens Adjustment

• Quick lens adjustment– Use “*” key or “Lens” key for the Internally Generated Lens Pattern

or– Direct Lens Adjustment (RCU)

• On the Remote Control three buttons with double action are provided, allowing direct alignment for lens ZOOM, FOCUS and VERTICAL SHIFT. For HORIZONTAL SHIFT, use the VOL button.

• 1. Press LENS ZOOM button [-] or [+] (A) for correct image size on the screen.

• 2. Press LENS FOCUS button [-] or [+] (C) for an overall focus of the image.• 3. Press LENS SHIFT button ↑ or ↓ (B) for correct vertical position of the

image on the screen. (image 4-15)• 4. Press VOL button [-] or [+] (D) for correct horizontal position of the image

on the screen.

– [-] button = left shift , [+] button = right shift

Page 31: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 31

Software Updates

• Installation requirements– Computer hardware

• LAN connection via TCP/IP using Projector Toolset

– Computer Software• Windows 2000, Windows NT, Win 95, Win 98 , Win ME or Win XP.

• Barco Projector Toolset

Page 32: 10/6/05, page 1 BARCO Events Training Large Venue Projector Operations

10/6/05 page 32

Maintenance

• Schedule– It is recommended that you clean or replace the air filters when you replace the

lamp - or sooner, if in dusty or dirty environment. In the latter case, often.– A clogged filter reduces the air flow and can lead to overheating and failure of

the projector.

• Dust Filters – 1 on Front, 1 on Top rear left , 1 on Bottom front left