10x8 u s t o m e r s atis rate factio c n shed … › free › free-10x8-gable-shed...free 10x8...
TRANSCRIPT
10X8GABLE SHED PLANFREE STREAMLINED VERSION
Supported & Recommended by our Friends & Partners:
2018
RATE
CU
STOMER SATISFACTION
CU
STOMER SATISFACTION
98,6%
Copyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 1
COMPARISON BETWEEN OUR FREE & PREMIUM PLANS
FREE 10X8 SHED PLAN:
• Basic schematics
• Basic angles
• Basic measurements
• Simplified instructions
• No material list
PREMIUM 10X8 SHED PLAN:
• Instant email delivery (PDF) download
• Views from all angles
• Measurements for every part
• Full layouts for every step
• Step-by-step assembly instructions
• Full material / shopping list
• Full cutting list
• PRO-TIPS for every section
• Mobile / Tablet / PC / MAC ready
• Beginner friendly
VS.
NEED MORE INFORMATION ON THIS PREMIUM 10X8 SHED PLAN?
AVAILABLE ONLY AT THE OFFICIAL 3DSHEDPLANS™ WEBSITE
Copyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 2
DISCLAIMER
3DSHEDPLANS™ is here to help and assist the DIYer. All information / advice is for general guidance only and whilst every effort is made to ensure that it is correct, it should not be relied upon as accurate. The information / advice contained within this document is intended for persons of no less than 18 years of age. Use of the information / advice contained within this document is at your own risk. It is the sole responsibility of any person(s) using the information / advice contained within this document that their level of competence is appropriate for the task they want to complete. All users of information / advice contained within this document should have all work checked / tested by a professional qualified trades person where applicable. You should be aware of current regulations on buildings, gas, water and electrical works (i.e. Part P) if you have any doubts we would advise you to research further information or contact the appropriate professional body.
LIABILITY3DSHEDPLANS™ and Netholics Media, LLC with the document through ownership and contribution will not accept any liability for any loss, damage, injury or negligence direct or indirect from use of the information / advice contained within this document. Any dispute arising from use of this document or disclaimer will be decided by the US courts under the relevant US law.
COPYRIGHT3DSHEDPLANS™ is official & registered trademark in the US. All of the contents (text/slogan) and artwork (graphics/logo) within this document are the copyrighted and trademarked property of 3DSHEDPLANS™ & Netholics Media, LLC. No part of the text or artwork may be reproduced by any means or in any form whatsoever without written permission, except for brief quotations embodied in literary articles or reviews. And no part of this document may be reproduced without written permission of the owners.This Information may be stored on computer for personal use only by the client (who purchased the plans from our official store), not for presentation or publication.
Copyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 3
BASIC OVERVIEW AND DIMENSIONS
This 10x8 gable shed is an exquisite and spacious mini shed with an overall body width of 8 feet and 1 inches
from the front and 10 feet and 2 ¼ inches from the side. The overall height of the shed is 11 feet and 8 ½
inches including the roof. The shed is equipped with a tall and broad front door with a height of 6 feet and 7 ½
inches and a width of 4 feet 6 inches. There is a small window of 3 feet x 3 feet. The overall roof width is 11
feet and 6 ¾ inches. Note that the windows and doors need to be purchased separately or you can use your
old doors and windows to adjust to this frame. If you are buying new windows and doors, follow the
manufacturer’s instructions for accurately adjusting them.
1
6' 4 1/2"
11' 8 1/2"
Copyr
3' 3"
8' 1"
FRONT VIEW DOOR
11' 6 1/2"
NOTE
Professional tip section is only available in PREMIUM (full) version of the plan.
10' 1"
3'
SIDE VIEW WINDOW
3'
ight © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 4
FOUNDATION AND FLOOR
The first step of creating your shed is to build a solid foundation and floor. The foundation will be supporting the entire
structure of your shed so it is a must to make sure it is strong enough. The foundation base should be 10 feet in length
and 8 feet in width as shown in the figure. Use 4x4 pressure treated skids for the foundation. As for the floor, use ¾”
tongue and groove plywood as shown in the figure. Use truss and skids carefully and make sure they are fitted and
spaced accurately.
2
NOTE
Professional tip section is only available in PREMIUM (full) version of the plan.
3/4" Tongue and Groove Plywood
FLOOR
8'
FOUNDATION BASE
10'
4x4 PRESSURE TREATED
SKID
Copyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 5
WALL STRUCTURES
Once you have set up the floor and the foundation, the next task is to work on the walls. The front and the back
wall will be 7 feet and 10 ¾ inches in width and 7 feet and 6 inches in height. For the front wall, cut the space for
the door as shown in the figure. Use L joints, cripple studs, plates, headers and wall studs to assemble the parts.
Once the frames are constructed, use T1-11 siding with galvanized nails and exterior screws to finish the frames.
3
NOTE
Professional tip section is only available in PREMIUM (full) version of the plan.
7' 6"
FRONT WALL
8'
7' 6"
8'
7' 4" BACK WALL
Copyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 6
WALL STRUCTURES
The right and left walls should be 9 feet and 5 inches in width from the top and 10 feet in width at the
bottom. The difference in size is because the top area will accommodate the roof. The width of both the
walls should be 7 feet and 6 inches in height. Use L joints, cripple studs, plates, headers and wall studs to
assemble the parts. Once the frames are constructed, use T1-11 siding with galvanized nails and exterior
screws to finish the frames.
4
NOTE
Professional tip section is only available in PREMIUM (full) version of the plan.
10' RIGHT WALL
7' 6"
9' 4"
10'LEFT WALL
7' 6"
9' 4"
Copyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 7
ROOF SECTION
Once all the wall structures are completed, it is time to get to the roof. The roof is the most complex part of
the shed. There is a lot of heavy lifting required. Therefore, it is recommended to have additional help.
Start with building roof rafters of 60 inches in dimension.Use ½ plywood for roof sheathing and asphalt
shingles for finishing the roof. Your roof needs to strong and the parts should be fit accurately to avoid any
leakages. Install T1-11 on the two outer most trusses using galvanized nails. Follow manufacturer’s
guidelines to install the shingles.
5
NOTE
Professional tip section is only available in PREMIUM (full) version of the plan.
Roof Rafters
Roof Overhang
5'
10' 7"
0.5" Plywood(Roof Sheathing) Asphalt
Shingles
Copyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 8
PREMIUM PLAN INCLUDES:
• Instant email delivery (PDF) download
• 30+ detailed 3D schematics
• Views from all angles
• Measurements for every part
• Full layouts for every step
• Step-by-step assembly instructions
• Full material / shopping list
• Full cutting list
• PRO-TIPS for every section
• Mobile / Tablet / PC / MAC friendly
• Beginner friendly
Supported & Recommended by our Friends & Partners:
2018
Wait no more! Save time & money now...Get your own professional 10X8 gable shed
plan and start building your dream shed today!Click here and go PREMIUM!
RATE
CU
STOMER SATISFACTION
CU
STOMER SATISFACTION
98,6%
AVAILABLE ONLY AT THE OFFICIAL 3DSHEDPLANS™ WEBSITECopyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy. Page 9