11 air pollution dispersion
TRANSCRIPT
![Page 1: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/1.jpg)
Meteorology and Dispersion ModelingAir Quality and Meteorology
• Primary Metrological Parameter
– Wind speed, Wind Direction, Atmospheric Stability
• Secondary Metrological Parameter
– sunlight– temperature– precipitation and humidity
– Topography
– Energy from the sun and earth’s rotation drives atmospheric circulation
![Page 2: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/2.jpg)
Stability• Dry adiabatic lapse rate – temperature
decreases due to lower pressure (ideal gas law)
• Ambient (actual) lapse rate< Г (temperature falls faster) unstable or
superadiabatic> Г (temperature falls slower) stable or
subadiabatic= Г (same rate) neutral
ft 1000F mC/100 /4500.1 °=°−=−=Γ .- dz
dT
![Page 3: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/3.jpg)
Example
Z(m) T(ºC)
2 -3.05
318 -6.21
( )C/m °−=
−−−−=
−−=
∆∆
0100.02318
05.321.6
12
12
zz
TT
z
T
m C/100 °−= 00.1
Since lapse rate = Г, atmosphere is neutral
![Page 4: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/4.jpg)
•Standard Plume: Moderate wind speed:
•Moderate radiation, night time
•Horizontal dispersion at a right angle to the wind is due to turbulence and diffusion, which occurs at the same rate as the vertical dispersion, which is not being opposed nor encouraged by the stability (or lack of it) in the atmosphere.
•Plume spreads equally in the vertical and horizontal as it propagates downstream, forming a coning plume
![Page 5: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/5.jpg)
Example
Z(m) T(ºC)
10 5.11
202 1.09
C/m °−=−
−=−−=
∆∆
0209.010202
11.509.1
12
12
zz
TT
z
T
m C/100 °−= 09.2
Since lapse rate is more negative than Г, (-1.00 ºC/100 m), atmosphere is unstable
![Page 6: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/6.jpg)
•In unstable air, the plume will whip up and down as the atmosphere mixes around (whenever an air parcel goes up, there must be air going down someplace else to maintain continuity, and the plume follows these air currents). This gives the plume the appearance that it is looping around.
•Vertical dispersion is very high.
•Less wind speed: Strong & Moderate radiation, day time Mechanical Turbulence is enhanced.
•High probability of high concentrations sporadically at ground level close to stack.
![Page 7: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/7.jpg)
ExampleZ(m) T(ºC)
18 14.03
286 12.56
C/m °−=−
−=−−=
∆∆
0055.018286
03.1456.12
12
12
zz
TT
z
T
m C/100 °−= 55.0
Since lapse rate more positive than Г, atmosphere is stable
Suppress Vertical Dispersion
![Page 8: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/8.jpg)
•High wind speed: Night time, High horizontal dispersion, Vertical dispersion is suppresses by stable atmosphere.
•In the vertical, dispersion is suppressed by the stability of the atmosphere, so pollution does not spread toward the ground. This results in very low pollution concentrations at the ground
![Page 9: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/9.jpg)
Temperature Inversions
• Extreme case of stability when lapse rate is actually positive, i.e. temperature increases with altitude
• Resulting temperature inversion prevents nearly all upward mixing
![Page 10: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/10.jpg)
Fanning Plume:Usually occurs at night, or 1200m-1800m above ground. There is high ground concentration if stack is short or if plume moves through rugged terrain. Occurs in stable inversion atmospheric conditions.
![Page 11: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/11.jpg)
Lofting Plume: favorable in the sense that fewer impacts at ground level. Pollutants go up into environment. They are created when atmospheric conditions are unstable above the plume
![Page 12: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/12.jpg)
Fumigation:most dangerous plume: contaminants are all coming down to ground level. They are created when atmospheric conditions are inversion stable above the plume and unstable below. This happens most often after the daylight sun has warmed the atmosphere, which turns a night time fanning plume into fumigation for about a half an hour.
![Page 13: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/13.jpg)
Effect of Lapse Rate on Plumes
![Page 14: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/14.jpg)
Point Source Gaussian Plume Model
![Page 15: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/15.jpg)
Point Source Gaussian Plume Model
![Page 16: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/16.jpg)
Point Source Gaussian Plume Model
• Model Structure and Assumptions– pollutants released from a “virtual point
source”– advective transport by wind– dispersive transport (spreading) follows
normal (Gaussian) distribution away from trajectory
– constant emission rate
![Page 17: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/17.jpg)
Point Source Gaussian Plume Model
• Model Structure and Assumptions (cont)– wind speed constant with time and elevation– pollutant is conservative (no reaction)– pollutant is “reflected by ground”– terrain is flat and unobstructed– uniform atmospheric stability
![Page 18: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/18.jpg)
Point Source Gaussian Plume Model
Where χ = downwind concentration at ground level (g/m3)
E = emission rate of pollutant (g/s)
sy,sz = plume standard deviations (m)
u = wind speed (m/s)
x, y, z, H = distances (m)
( )
−
−
=
22
2
1exp
2
1exp,0,,
zyzy s
H
s
y
uss
EHyx
πχ
![Page 19: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/19.jpg)
Point Source Gaussian Plume Model – Effective Stack Height
where
H = Effective stack height (m)
h = height of physical stack (m)
ΔH = plume rise (m)
HhH ∆+=
![Page 20: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/20.jpg)
Point Source Gaussian Plume Model – Effective Stack Height
• Holland’s formula
where vs = stack velocity (m/s)
d = stack diameter (m) u = wind speed (m) P = pressure (kPa) Ts = stack temperature (ºK)
Ta = air temperature (ºK)
( )
−×+=∆ − dT
TTP
u
vH
a
ass 21068.25.1
![Page 21: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/21.jpg)
Point Source Gaussian Plume Model – Stability Categories
A Extremely Unstable D Neutral
B Moderately Unstable E Slightly Stable
C Slightly Unstable F Moderately Stable
![Page 22: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/22.jpg)
Point Source Gaussian Plume Model – Horizontal Dispersion
![Page 23: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/23.jpg)
Point Source Gaussian Plume Model – Vertical Dispersion
![Page 24: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/24.jpg)
Point Source Gaussian Plume Model – Wind Speed Correction
• Unless the wind speed at the virtual stack height is known, it must be estimated from the ground wind speed
where ux = wind speed at elexation zx
p = empirical constant
p
z
zuu
=
1
212
![Page 25: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/25.jpg)
Example
• A stack in an urban area is emitting 80 g/s of NO. It has an effective stack height of 100 m. The wind speed is 4 m/s at 10 m. It is a clear summer day with the sun nearly overhead. Estimate the ground level concentration at a) 2 km downwind on the centerline and b) 2 km downwind, 0.1 km off the centerline.
![Page 26: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/26.jpg)
Example1. Determine stability class
Assume wind speed is 4 km at ground surface. Description suggests strong solar radiation.Stability class B
![Page 27: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/27.jpg)
Example2. Estimate the wind speed at the effective stack
height
Note: effective stack height given – no need to calculate using Holland’s formula
m/s 65.510
1004
15.0
1
212 =
=
=
p
z
zuu
![Page 28: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/28.jpg)
Example3. Determine σy and σz
σy = 290
σz = 220
290220
![Page 29: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/29.jpg)
Example
4. Determine concentration using Eq
a. x = 2000, y = 0
−
−=
22
220
100
2
1exp
290
0
2
1exp
)6.5)(220)(290(
80)0,2000(
πC
33 μg/m g/m 3.641043.6)0,2000( 5 =×= −C
![Page 30: 11 air pollution dispersion](https://reader034.vdocument.in/reader034/viewer/2022042522/55a2bf8b1a28ab093f8b4651/html5/thumbnails/30.jpg)
Example
b. x = 2000, y = 0.1 km = 100 m
−
−=
22
220
100
2
1exp
290
100
2
1exp
)6.5)(220)(290(
80)100,2000(
πC
33 μg/m g/m 6.601006.6)0,2000( 5 =×= −C