CCIE Routing & Switching v5.1 Combined Expanded Blueprint

IMPORTANT: DO NOT CONSIDER THIS DOCUMENT AS AN OFFICIAL SOURCE OF INFORMATION. The only official source of information for Cisco certification blueprints is cisco.com. This document contains elements of the original CCIE Routing & Switching certification written and lab exam blueprints, combined with the expanded blueprint offering from INE.com. This document attempts to add INE's more detailed topic scope within the framework of the official Cisco blueprint. Please view the original source material for further information:

Cisco Official 400-101 v5.1 Written Exam Blueprint:• https://learningnetwork.cisco.com/community/certifications/ccie_routing_switching/

written_exam_v5/exam-topicsCisco Official CCIE Routing & Switching v5 Lab Exam Blueprint:

• https://learningnetwork.cisco.com/community/certifications/ccie_routing_switching/ lab_exam_v5/exam-topics

INE's CCIE RSv5 Expanded Blueprint:• http://blog.ine.com/2014/04/17/ines-ccie-rsv5-expanded-blueprint/

Major topic scopes include the overall percentage of questions within the written exam, as published by Cisco. The percentages of the lab exam are not taken into account in this document. Topics that appear only on the written exam are suffixed with "(W)". The "Network Principles" and "Evolving Technologies" sections apply to the written exam only, and these are the only two sections where each item is not suffixed with "(W)". The exception is the "Network Troubleshooting" sub-section of "Network Principles", which appears on both the written and lab exams, and is suffixed with "(W&L)".

Due to the volume of the blueprint, it is nearly impossible to have 100% consistency with regard to sub-topics fitting perfectly within some sections. Individual topics may appear more than once, or may fit better within different categories than what is presented here. Some sub-sections could be expanded more, and other sub-sections could be more compressed. I have attempted to minimize these issues, though their occurrence is a practical inevitability. The placement of several sub-topics within this document can be entirely a matter of opinion (and I could very well be wrong in where I chose to place them!)

My intention with creating and releasing this document is to provide a more complete frame of reference as both a starting point for your studies, as well as a potential point of final review to make sure you've covered as many topics as possible before taking the exams. The topics are not presented in the order in which you should study them, therefore this document serves as a sort of "checklist" with regards to both the written and lab exams within the framework of the official blueprints, not as an end-to-end study guide.

Users of Microsoft Word (and possibly other software) can navigate through this document more quickly with the navigation sidebar feature. This document was designed around the availability of this feature.

NOTE: THIS DOCUMENT CONTAINS LINKS TO CONTENT PROVIDED BY INE.COM. YOU MUST HAVE AN ACTIVE SUBSCRIPTION TO VIEW THIS MATERIAL.

UPDATED: November 25, 2016

Original version available at www.neckercube.com v1.1, Page 1

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

1.0 Network Principles 10% (W)1.1 Network Theory1.1.a Describe basic software architecture differences between IOS and IOS XE (excluding specific platform architecture)1.1.a [i] Control plane and forwarding plane1.1.a [ii] Impact to troubleshooting and performance1.1.b Identify Cisco Express Forwarding concepts1.1.b [i] RIB, FIB, LFIB, Adjacency table1.1.b [ii] Load balancing hash1.1.b [iii] Polarization concept and avoidance1.1.c Explain general network challenges1.1.c [i] Unicast flooding1.1.c [ii] Out of order packets1.1.c [iii] Asymmetric routing1.1.c [iv] Impact of micro burst1.1.d Explain IP operations1.1.d [i] ICMP unreachable, redirect1.1.d [ii] IPv4 options1.1.d [iii] IPv6 extension headers1.1.d [iv] IPv4 and IPv6 fragmentation1.1.d [v] TTL1.1.d [vi] IP MTU1.1.e Explain TCP operations1.1.e [i] IPv4 and IPv6 PMTU1.1.e [ii] MSS1.1.e [iii] Latency1.1.e [iv] Windowing1.1.e [v] Bandwidth delay product1.1.e [vi] Global synchronization1.1.e [vii] TCP Options1.1.e [viii] Configure TCP Optimization (W&L)

▪ INE: RSv5 Workbook TCP Optimization

Original version available at www.neckercube.com v1.1, Page 2

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

1.1.f Explain UDP operations1.1.f [i] Starvation1.1.f [ii] Latency1.1.f [iii] RTP/RTCP concepts

1.2 Network Implementation and Operation1.2.a Evaluate proposed changes to a network1.2.a [i] Changes to routing protocol parameters1.2.a [ii] Migrate parts of a network to IPv61.2.a [iii] Routing protocol migration1.2.a [iv] Adding multicast support1.2.a [v] Migrate Spanning Tree Protocol1.2.a [vi] Evaluate impact of new traffic on existing QoS design

1.3 Network Troubleshooting (W&L)1.3.a Use IOS troubleshooting tools (W&L)1.3.a [i] debug, conditional debug (W&L)

▪ INE: RSv4 Workbook Vol 1 Sec 12.11 Conditional Debugging1.3.a [ii] ping, traceroute with extended options (W&L)1.3.a [iii] Performance monitor (W&L)1.3.b Apply troubleshooting methodologies (W&L)1.3.b [i] Diagnose the root cause of networking issue [analyze symptoms, identify and describe root cause] (W&L)1.3.b [ii] Design and implement valid solutions according to constraints (W&L)1.3.b [iii] Verify and monitor resolution (W&L)1.3.c Interpret packet capture (W&L)1.3.c [i] Using Wireshark trace analyzer (W&L)1.3.c [ii] Using IOS embedded packet capture (W&L)

Original version available at www.neckercube.com v1.1, Page 3

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

2.0 Layer 2 Technologies 13%2.1 LAN Switching Technologies2.1.a Implement and troubleshoot switch administration2.1.a [i] Managing MAC address table (including CAM aging time)

▪ INE: RSv5 Workbook Managing MAC Address Table2.1.a [ii] Errdisable recovery2.1.a [iii] L2 MTU2.1.a [iv] Smartport Macros

▪ INE: RSv5 Workbook Smartport Macros2.1.a [v] Describe SDM Templates (W)2.1.b Implement and troubleshoot Layer 2 protocols2.1.b [i] CDP

▪ INE: RSv5 Workbook CDP▪ INE: RSv4 Workbook Vol 1 Sec 12.22 CDP

2.1.b [ii] LLDP2.1.b [iii] UDLD

▪ INE: RSv5 Workbook Unidirectional Link Detection

2.1.c Implement and troubleshoot VLAN2.1.c [i] Access ports

▪ INE: RSv5 Workbook Layer 2 Access Switchports2.1.c [ii] VLAN database2.1.c [iii] Normal, extended VLAN, voice VLAN

▪ INE: RSv5 Workbook Voice VLANs

2.1.d Implement and troubleshoot trunking2.1.d [i] VTPv1, VTPv2, VTPv3, VTP pruning (and Prune Eligible list), VTP Authentication

▪ INE: RSv5 Workbook VTP Version 3▪ INE: RSv5 Workbook VTP Pruning▪ INE: RSv5 Workbook VTP Prune-Eligible List▪ INE: RSv5 Workbook VTP Domain▪ INE: RSv5 Workbook VTP Transparent

2.1.d [ii] dot1Q▪ INE: RSv4 Workbook Vol 1 Sec 1.4 802.1q Trunking

2.1.d [iii] Native VLAN▪ INE: RSv5 Workbook 802.1q Native VLAN

2.1.d [iv] Manual pruning (Trunking allowed list)

2.1.d [v] Dynamic Trunking Protocol (DTP)▪ INE: RSv5 Workbook 802.1q Dynamic Trunking

Original version available at www.neckercube.com v1.1, Page 4

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

▪ INE: RSv5 Workbook Layer 2 Dynamic Switchports▪ INE: RSv5 Workbook DTP Negotiation

2.1.e Implement and troubleshoot EtherChannel2.1.e [i] LACP, PAgP, manual

2.1.e [i] Manual▪ INE: RSv5 Workbook Layer 2 EtherChannel

2.1.e [i] PAgP▪ INE: RSv5 Workbook Layer 2 EtherChannel with PAgP

2.1.e [i] LACP▪ INE: RSv5 Workbook Layer 2 EtherChannel with LACP

2.1.e [ii] Layer 2, Layer 3▪ INE: RSv5 Workbook Layer 2 EtherChannel▪ INE: RSv5 Workbook Layer 3 EtherChannel

2.1.e [iii] Load-balancing2.1.e [iv] EtherChannel Misconfiguration Guard2.1.e [v] EtherChannel protocol limiting2.1.f Implement and troubleshoot Spanning-Tree2.1.f [i] PVST+2.1.f [ii] RPVST+ (including convergence optimizations)2.1.f [iii] MST (including multi-region, and CST/PVST+ interoperability)

▪ INE: RSv5 Workbook MST and CST/PVST+ Interoperability2.1.f [iv] Switch priority

▪ INE: RSv5 Workbook STP Root Bridge Election▪ INE: RSv5 Workbook MST Root Bridge Election

2.1.f [v] Port priority▪ INE: RSv5 Workbook STP Path Selection with Port Priority▪ INE: RSv5 Workbook MST Path Selection with Port Priority

2.1.f [vi] Path cost▪ INE: RSv5 Workbook STP Path Selection with Port Cost▪ INE: RSv5 Workbook MST Path Selection with Port Cost

2.1.f [vii] STP timers▪ INE: RSv5 Workbook Tuning STP Convergence Timers

2.1.f [viii] PortFast (and RSTP Edge ports)▪ INE: RSv5 Workbook STP PortFast▪ INE: RSv5 Workbook STP PortFast Default

2.1.f [ix] UplinkFast▪ INE: RSv5 Workbook STP UplinkFast

2.1.f [x] BackboneFast▪ INE: RSv5 Workbook STP BackboneFast

2.1.f [xi] BPDUguard▪ INE: RSv5 Workbook STP BPDU Guard▪ INE: RSv5 Workbook STP BPDU Guard Default

Original version available at www.neckercube.com v1.1, Page 5

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

2.1.f [xii] BPDUfilter▪ INE: RSv5 Workbook Sec BPDU Filter▪ INE: RSv5 Workbook Sec BPDU Filter Default

2.1.f [xiii] Loopguard▪ INE: RSv5 Workbook STP Loop Guard

2.1.f [xiv] Rootguard▪ INE: RSv5 Workbook STP Root Guard

2.1.g Implement and troubleshoot other LAN switching technologies2.1.g [i] SPAN

▪ INE: RSv5 Workbook SPAN2.1.g [ii] RSPAN

▪ INE: RSv5 Workbook RSPAN2.1.g [iii] ERSPAN2.1.g [iv] Fallback bridging

▪ INE: RSv4 Workbook Vol 1 Sec 1.46 Fallback Bridging

2.1.h Describe chassis virtualization and aggregation technologies, excluding specific platform implementation (W)2.1.h [i] Multichassis (W)2.1.h [ii] VSS concepts (W)2.1.h [iii] Alternative to STP (FlexLinks) (W)2.1.h [iv] Stackwise (W)2.1.i Describe Spanning-Tree concepts (W)2.1.i [i] Compatibility between MST and RSTP (W)2.1.i [ii] STP Dispute (W)2.1.i [iii] STP Bridge Assurance (W)

2.2 Layer 2 Multicast2.2.a Implement and troubleshoot IGMP2.2.a [i] IGMPv1, IGMPv2, IGMPv32.2.a [ii] IGMP snooping

▪ INE: RSv5 Workbook IGMP Snooping2.2.a [iii] IGMP querier election2.2.a [iv] IGMP filter

▪ INE: RSv5 Workbook IGMP Filtering2.2.a [v] IGMP proxy2.2.a [vi] IGMP timers

▪ INE: RSv5 Workbook IGMP Timers2.2.a [vii] IGMP profiles

▪ INE: RSv5 Workbook Catalyst IGMP Profiles

2.2.b Explain MLD (W)

Original version available at www.neckercube.com v1.1, Page 6

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

2.2.c Explain PIM snooping (W)2.2.d Implement and troubleshoot Multicast VLAN Registration

▪ INE: RSv5 Workbook Catalyst Multicast VLAN Registration

2.3 Layer 2 WAN Circuit Technologies2.3.a Implement and troubleshoot HDLC2.3.b Implement and troubleshoot PPP2.3.b [i] Authentication [PAP, CHAP]

▪ INE: RSv4 Workbook Vol 1 Sec 1.48 PPP2.3.b [ii] PPPoE

▪ INE: RSv4 Workbook Vol 1 Sec 1.50 PPPoE2.3.b [iii] MLPPP2.3.c Describe WAN rate-based Ethernet circuits (W)2.3.c [i] Metro and WAN Ethernet topologies (W)2.3.c [ii] Use of rate-limited WAN Ethernet services (W)2.3.d Implement and troubleshoot 802.1q Tunneling2.3.d [i] L2 Protocol Tunneling2.3.d [ii] Layer 2 MTU issues2.3.d [iii] EtherChannel over 802.1q Tunneling

Original version available at www.neckercube.com v1.1, Page 7

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.0 Layer 3 Technologies 37%3.1 Addressing Technologies3.1.a Identify, implement and troubleshoot IPv4 addressing and subnetting3.1.a [i] Address types, VLSM3.1.a [ii] ARP3.1.b Identify, implement and troubleshoot IPv6 addressing and subnetting3.1.b [i] Unicast, multicast3.1.b [ii] EUI-64

▪ INE: RSv5 Workbook IPv6 EUI-64 Addressing3.1.b [iii] ND, RS/RA3.1.b [iv] Autoconfig/SLAAC, temporary addresses [RFC4941]

▪ INE: RSv5 Workbook IPv6 Auto-Configuration3.1.b [v] Global prefix configuration feature3.1.b [vi] IPv6 link-local addressing

▪ INE: RSv5 Workbook IPv6 Link-Local Addressing3.1.b [vii] IPv6 unique local addressing

▪ INE: RSv5 Workbook IPv6 Unique Local Addressing3.1.b [viii] IPv6 global aggregatable addressing

▪ INE: RSv5 Workbook IPv6 Global Aggregatable Addressing

3.2 Layer 3 Multicast3.2.a Troubleshoot Reverse Path Forwarding3.2.a [i] RPF failure

▪ INE: RSv5 Workbook Multicast RPF Failure3.2.a [ii] RPF failure with tunnel interface3.2.b Implement and troubleshoot IPv4 Protocol Independent Multicast3.2.b [i] PIM Dense Mode

▪ INE: RSv5 Workbook PIM Dense Mode3.2.b [ii] Sparse Mode

▪ INE: RSv5 Workbook PIM Sparse Mode3.2.b [iii] Sparse-Dense Mode

▪ INE: RSv5 Workbook PIM Sparse-Dense Mode3.2.b [iv] Static RP

3.2.b [v] Auto-RP▪ INE: RSv5 Workbook Auto-RP▪ INE: RSv5 Workbook Auto-RP Listener

Original version available at www.neckercube.com v1.1, Page 8

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

▪ INE: RSv5 Workbook Multiple Candidate RPs▪ INE: RSv5 Workbook Filtering Candidate RPs▪ INE: RSv5 Workbook RP & MA Placement Problems

3.2.b [vi] BSR▪ INE: RSv5 Workbook PIM Bootstrap Router▪ INE: RSv5 Workbook BSR - Multiple RP Candidates

3.2.b [vii] BiDirectional PIM▪ INE: RSv5 Workbook Bidirectional PIM

3.2.b [viii] Source-Specific Multicast▪ INE: RSv5 Workbook Source Specific Multicast

3.2.b [ix] Group to RP mapping3.2.b [x] Multicast boundary, TTL scoping

▪ INE: RSv5 Workbook Filtering Auto-RP Messages▪ INE: RSv5 Workbook Filtering BSR Messages▪ INE: RSv5 Workbook Multicast Boundary

3.2.b [xi] PIM accept register filtering, accept RP filtering▪ INE: RSv5 Workbook PIM Accept Register Filtering▪ INE: RSv5 Workbook PIM Accept RP Filtering

3.2.b [xii] PIM registration failure3.2.b [xiii] PIM DR and DF election, PIM Assert

▪ INE: RSv5 Workbook PIM DR Election▪ INE: RSv5 Workbook PIM Assert

3.2.b [xiv] PIM NBMA mode▪ INE: RSv4 Workbook Vol 1 Sec 8.10 PIM NBMA Mode

3.2.c Implement and troubleshoot Multicast Source Discovery Protocol3.2.c [i] Intra-domain MSDP [Anycast RP]

▪ INE: RSv5 Workbook MSDP▪ INE: RSv5 Workbook Anycast RP

3.2.c [ii] MSDP SA filter3.2.d Describe IPv6 multicast (W)3.2.d [i] PIMv6, including MLD and BSR (W)

▪ INE: RSv5 Workbook IPv6 PIM and MLD▪ INE: RSv5 Workbook IPv6 PIM BSR

3.2.d [ii] IPv6 embedded RP (W)▪ INE: RSv5 Workbook IPv6 Embedded RP

3.2.d [iii] IPv6 SSM▪ INE: RSv5 Workbook IPv6 SSM

3.2.e Implement and troubleshoot miscellaneous IPv4 multicast3.2.e [i] Static Multicast Routes3.2.e [ii] Multicast over GRE

▪ INE: RSv5 Workbook Multicast Over GRE3.2.e [iii] Stub Multicast Routing

▪ INE: RSv5 Workbook Stub Multicast Routing & IGMP Helper

Original version available at www.neckercube.com v1.1, Page 9

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.2.e [iv] Multicast Helper Map▪ INE: RSv5 Workbook Multicast Helper Map

3.2.e [v] Multicast Rate Limiting▪ INE: RSv4 Workbook Vol 1 Sec 8.25 Multicast Rate Limiting

3.3 Fundamental Routing Concepts3.3.a Implement and troubleshoot static routing3.3.a [i] Egress interface vs. Next hop static routing3.3.a [ii] Floating static routes

▪ INE: RSv5 Workbook Floating Static Routes

3.3.b Implement and troubleshoot default routing3.3.b [i] RIPv2 default routing, conditional default routing, reliable conditional default routing

▪ INE: RSv5 Workbook RIPv2 Default Routing▪ INE: RSv5 Workbook RIPv2 Conditional Default Routing▪ INE: RSv5 Workbook RIPv2 Reliable Conditional Default Routing

3.3.b [ii] EIGRP default network▪ INE: RSv4 Workbook Sec 5.7 EIGRP Default Network

3.3.b [iii] OSPF default routing, conditional default routing, reliable conditional default routing

▪ INE: RSv5 Workbook OSPF Default Routing▪ INE: RSv5 Workbook OSPF Conditional Default Routing▪ INE: RSv5 Workbook OSPF Reliable Conditional Default Routing

3.3.b [iv] BGP default routing▪ INE: RSv5 Workbook BGP Default Routing

3.3.c Compare routing protocol types3.3.c [i] Distance Vector3.3.c [ii] Link State3.3.c [iii] Path Vector3.3.d Implement, optimize and troubleshoot Administrative Distance

3.3.e Implement and troubleshoot passive interface3.3.e [i] RIPv23.3.e [ii] EIGRP3.3.e [iii] OSPF3.3.f Implement and troubleshoot VRF lite

▪ INE: RSv5 Workbook VRF Lite

3.3.g Implement, optimize and troubleshoot filtering with any routing protocol

Original version available at www.neckercube.com v1.1, Page 10

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.3.g [i] RIPv2 Filtering with Passive Interface▪ INE: RSv5 Workbook RIPv2 Filtering with Passive Interface

3.3.g [ii] RIPv2 Filtering with Prefix-Lists▪ INE: RSv5 Workbook RIPv2 Filtering with Prefix-Lists

3.3.g [iii] RIPv2 Filtering with Standard Access-Lists▪ INE: RSv5 Workbook RIPv2 Filtering with Standard Access-Lists

3.3.g [iv] RIPv2 Filtering with Extended Access-Lists▪ INE: RSv5 Workbook RIPv2 Filtering with Extended Access-Lists

3.3.g [v] RIPv2 Filtering with Offset Lists▪ INE: RSv5 Workbook RIPv2 Filtering with Offset Lists

3.3.g [vi] RIPv2 Filtering with Administrative Distance▪ INE: RSv5 Workbook RIPv2 Filtering with Administrative Distance

3.3.g [vii] RIPv2 Filtering with Per Neighbor AD▪ INE: RSv5 Workbook RIPv2 Filtering with Per Neighbor AD

3.3.g [viii] EIGRP Filtering with Passive Interface▪ INE: RSv5 Workbook EIGRP Filtering with Passive Interface

3.3.g [ix] EIGRP Filtering with Prefix-Lists▪ INE: RSv5 Workbook EIGRP Filtering with Prefix-Lists▪ INE: RSv5 Workbook EIGRP IPv6 Prefix Filtering

3.3.g [x] EIGRP Filtering with Standard Access-Lists▪ INE: RSv5 Workbook EIGRP Filtering with Standard Access-Lists

3.3.g [xi] EIGRP Filtering with Extended Access-Lists▪ INE: RSv5 Workbook EIGRP Filtering with Extended Access-Lists

3.3.g [xii] EIGRP Filtering with Offset Lists▪ INE: RSv5 Workbook EIGRP Filtering with Offset Lists

3.3.g [xiii] EIGRP Filtering with Administrative Distance▪ INE: RSv5 Workbook EIGRP Filtering with Administrative Distance

3.3.g [xiv] EIGRP Filtering with Per Neighbor AD▪ INE: RSv5 Workbook EIGRP Filtering with Per Neighbor AD

3.3.g [xv] EIGRP Filtering with Route Maps▪ INE: RSv5 Workbook EIGRP Filtering with Route Maps

3.3.g [xvi] EIGRP Per Neighbor Prefix Limit3.3.g [xvii] EIGRP Redistribution Prefix Limit3.3.g [xviii] OSPF Filtering with Distribute-Lists

▪ INE: RSv5 Workbook OSPF Filtering with Distribute-Lists3.3.g [xix] OSPF Filtering with Administrative Distance

▪ INE: RSv5 Workbook OSPF Filtering with Administrative Distance3.3.g [xx] OSPF Filtering with Route-Maps

▪ INE: RSv5 Workbook OSPF Filtering with Route-Maps3.3.g [xxi] OSPF Filtering with Summarization3.3.g [xxii] OSPF LSA Type-3 Filtering

▪ INE: RSv5 Workbook OSPF LSA Type-3 Filtering3.3.g [xxiii] OSPF Forwarding Address Suppression

▪ INE: RSv5 Workbook OSPF Forwarding Address Suppression

Original version available at www.neckercube.com v1.1, Page 11

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.3.g [xxiv] OSPF NSSA ABR External Prefix Filtering▪ INE: RSv5 Workbook OSPF NSSA ABR External Prefix Filtering

3.3.g [xxv] OSPF Database Filtering▪ INE: RSv5 Workbook OSPF Database Filtering

3.3.g [xxvi] NSSA Redistribution Filtering▪ INE: RSv5 Workbook OSPF NSSA Redistribution Filtering

3.3.g [xxvii] OSPFv3 Prefix Suppression3.3.g [xxviii] BGP Prefix-Lists

▪ INE: RSv5 Workbook BGP Filtering with Prefix-Lists3.3.g [xxix] BGP Standard Access-Lists Task

▪ INE: RSv5 Workbook BGP Filtering with Standard Access-Lists3.3.g [xxx] BGP Extended Access-Lists

▪ INE: RSv5 Workbook BGP Filtering with Extended Access-Lists3.3.g [xxxi] BGP Maximum Prefix

▪ INE: RSv5 Workbook BGP Filtering with Maximum Prefix3.3.g [xxxii] IPv6 Filtering

▪ INE: RSv5 Workbook IPv6 Filtering

3.3.h Implement, optimize and troubleshoot redistribution between any routing protocol3.3.h [i] IP route profile3.3.h [ii] Redistribution into RIP3.3.h [iii] Redistribution into EIGRP3.3.h [iv] Redistribution into OSPF3.3.h [v] Redistribution into BGP

▪ INE: RSv5 Workbook BGP Redistribute Internal3.3.h [vi] IPv6 Redistribution

▪ INE: RSv5 Workbook IPv6 Redistribution

3.3.i Implement, optimize and troubleshoot manual and auto summarization with any routing protocol3.3.i [i] RIPv2 Auto-Summary

▪ INE: RSv5 Workbook RIPv2 Auto-Summary3.3.i [ii] RIPv2 Manual Summarization

▪ INE: RSv5 Workbook RIPv2 Manual Summarization3.3.i [iii] EIGRP Auto-Summary

▪ INE: RSv5 Workbook EIGRP Auto-Summary3.3.i [iv] EIGRP Manual Summarization

▪ INE: RSv5 Workbook EIGRP Summarization▪ INE: RSv5 Workbook EIGRP IPv6 Summarization

3.3.i [v] EIGRP Summarization with Default Routing▪ INE: RSv5 Workbook EIGRP Summarization with Default Routing▪ INE: RSv5 Workbook EIGRP IPv6 Default Routing

3.3.i [vi] EIGRP Summarization with Leak Map▪ INE: RSv5 Workbook EIGRP Summarization with Leak Map

Original version available at www.neckercube.com v1.1, Page 12

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.3.i [vii] EIGRP Floating Summarization▪ INE: RSv5 Workbook EIGRP Floating Summarization

3.3.i [viii] EIGRP Poisoned Floating Summarization▪ INE: RSv5 Workbook EIGRP Poisoned Floating Summarization

3.3.i [ix] EIGRP Summary Metric3.3.i [x] OSPF Internal Summarization

▪ INE: RSv5 Workbook OSPF Internal Summarization3.3.i [xi] OSPF External Summarization

▪ INE: RSv5 Workbook OSPF External Summarization3.3.i [xii] OSPF Path Selection with Summarization

▪ INE: RSv5 Workbook OSPF Path Selection with Summarization3.3.i [xiii] OSPF Summarization and Discard Routes

▪ INE: RSv5 Workbook OSPF Summarization and Discard Routes3.3.i [xiv] OSPF OSPFv3 Summarization

▪ INE: RSv5 Workbook OSPFv3 Summarization3.3.i [xv] BGP Auto-Summary

▪ INE: RSv5 Workbook BGP Auto-Summary3.3.i [xvi] BGP Aggregation

▪ INE: RSv5 Workbook BGP Aggregation3.3.i [xvii] BGP Summary Only

▪ INE: RSv5 Workbook BGP Aggregation - Summary Only3.3.i [xviii] BGP Suppress Map

▪ INE: RSv5 Workbook BGP Aggregation - Suppress Map3.3.i [xix] BGP Unsuppress Map

▪ INE: RSv5 Workbook BGP Aggregation - Unsuppress Map3.3.i [xx] BGP Attribute-Map

▪ INE: RSv5 Workbook BGP Aggregation - Attribute-Map3.3.i [xxi] BGP Advertise Map

▪ INE: RSv5 Workbook BGP Aggregation - Advertise Map3.3.i [xxii] BGP AS set

▪ INE: RSv5 Workbook BGP Aggregation - AS Set

3.3.j Implement, optimize and troubleshoot Policy-Based Routing3.3.j [i] Policy routing

▪ INE: RSv5 Workbook Policy Routing3.3.j [ii] Policy routing and IP SLA

▪ INE: RSv5 Workbook Policy Routing and IP SLA3.3.j [iii] Local policy routing

▪ INE: RSv5 Workbook Local Policy Routing

3.3.k Identify and troubleshoot sub-optimal routing3.3.k [i] Longest match routing

▪ INE: RSv5 Workbook Longest Match Routing3.3.k [ii] Route recursion

▪ INE: RSv5 Workbook Routing to Multipoint Broadcast Interfaces

Original version available at www.neckercube.com v1.1, Page 13

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

▪ INE: RSv5 Workbook Routing to NBMA Interfaces

3.3.l Implement and troubleshoot Bidirectional Forwarding Detection▪ INE: SPv4 Workbook OSPFv2 BFD▪ INE: SPv4 Workbook OSPFv3 BFD▪ INE: SPv4 Workbook IS-IS BFD

3.3.m Implement and troubleshoot loop prevention mechanisms3.3.m [i] Route tagging, filtering3.3.m [ii] Split horizon for RIP and EIGRP

▪ INE: RSv5 Workbook RIPv2 Split Horizon▪ INE: RSv4 Workbook Vol 1 Sec 5.3 EIGRP Split Horizon

3.3.m [iii] Route poisoning3.3.m [iv] Administrative Distance based loops3.3.m [v] Metric based loops3.3.n Implement and troubleshoot routing protocol authentication3.3.n [i] MD5

▪ INE: RSv5 Workbook RIPv2 Authentication▪ INE: RSv4 Workbook Vol 1 Sec 5.4 EIGRP MD5 Authentication▪ INE: RSv5 Workbook OSPF MD5 Authentication▪ INE: RSv5 Workbook Authenticating BGP Peerings

3.3.n [ii] Key-chain, including automatic key rollover▪ INE: RSv5 Workbook EIGRP Key Chain Rotation▪ INE: RSv5 Workbook OSPF MD5 Authentication with Multiple Keys

3.3.n [iii] EIGRP HMAC SHA2-256bit▪ INE: RSv5 Workbook EIGRP MD5 & SHA2-256 Authentication

3.3.n [iv] OSPFv2 SHA1-196bit▪ INE: RSv5 Workbook OSPF SHA Authentication

3.3.n [v] OSPFv3 IPsec authentication3.3.n [vi] OSPF area authentication3.3.n [vii] OSPF interface authentication3.3.n [viii] OSPF null authentication

▪ INE: RSv5 Workbook OSPF Null Authentication3.3.n [ix] OSPF virtual link authentication3.3.n [x] Clear text authentication

▪ INE: RSv5 Workbook OSPF Clear Text Authentication

3.3.o Implement and troubleshoot On Demand Routing (ODR)▪ INE: RSv5 Workbook On Demand Routing (ODR)

3.4 RIP [v2 and v6]3.4.a Implement and troubleshoot RIPv2

Original version available at www.neckercube.com v1.1, Page 14

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.4.a [i] Enabling RIPv2▪ INE: RSv5 Workbook Enabling RIPv2

3.4.a [ii] RIP Send and Receive Versions▪ INE: RSv5 Workbook RIP Send and Receive Versions

3.4.a [iii] RIPv2 Unicast Updates▪ INE: RSv5 Workbook RIPv2 Unicast Updates

3.4.a [iv] RIPv2 Broadcast Updates▪ INE: RSv5 Workbook RIPv2 Broadcast Updates

3.4.a [v] Source Validation▪ INE: RSv5 Workbook RIPv2 Source Validation

3.4.a [vi] Path Selection, Offset List▪ INE: RSv5 Workbook RIPv2 Offset List

3.4.a [vii] RIPv2 Convergence Timers▪ INE: RSv5 Workbook RIPv2 Convergence Timers

3.4.a [viii] RIPv2 Triggered Updates▪ INE: RSv4 Workbook Vol 1 Sec 4.21 RIPv2 Triggered Updates

3.4.b Describe RIPv6 [RIPng] (W)▪ INE: RSv5 Workbook RIPng▪ INE: RSv5 Workbook RIPng over NBMA▪ INE: RSv5 Workbook RIPng Summarization▪ INE: RSv5 Workbook RIPng Prefix Filtering▪ INE: RSv5 Workbook RIPng Metric Manipulation▪ INE: RSv5 Workbook RIPng Default Routing

3.5 EIGRP [for IPv4 and IPv6]3.5.a Describe packet types3.5.a [i] Packet types3.5.a [ii] Route types [internal, external, summary]3.5.b Implement and troubleshoot neighbor relationship3.5.b [i] Multicast, unicast EIGRP peering, network statement

▪ INE: RSv5 Workbook EIGRP Network Statement▪ INE: RSv5 Workbook EIGRP Unicast Updates▪ INE: RSv5 Workbook EIGRPv6

3.5.b [ii] OTP point-to-point peering (W)3.5.b [iii] OTP route-reflector peering (W)3.5.b [iv] OTP multiple service providers scenario (W)3.5.b [v] EIGRP neighbor logging

▪ INE: RSv5 Workbook EIGRP Neighbor Logging

Original version available at www.neckercube.com v1.1, Page 15

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.5.b [vi] EIGRP Router-ID▪ INE: RSv5 Workbook EIGRP Router-ID

3.5.c Implement and troubleshoot loop free path selection3.5.c [i] RD, FD, FC, Successor, Feasible Successor3.5.c [ii] Classic metric3.5.c [iii] Wide metric3.5.c [iv] Modifying EIGRP Vector Attributes3.5.c [v] Metric Weights

▪ INE: RSv5 Workbook EIGRP Metric Weights▪ INE: RSv5 Workbook EIGRPv6 Metric Manipulation

3.5.c [vi] EIGRP default metric▪ INE: RSv5 Workbook EIGRP Default Metric

3.5.c [vii] EIGRP maximum hops▪ INE: RSv5 Workbook EIGRP Maximum Hops

3.5.c [viii] EIGRP route tag enhancements3.5.c [ix] EIGRP Traffic Engineering with Metric

▪ INE: RSv5 Workbook EIGRP Traffic Engineering with Metric

3.5.d Implement and troubleshoot operations3.5.d [i] General operations

▪ INE: RSv5 Workbook EIGRP Convergence Timers3.5.d [ii] Topology table, update, query, active, passive3.5.d [iii] Stuck in Active3.5.d [iv] Graceful shutdown, Graceful restart, NSF Non Stop Forwarding3.5.d [v] EIGRP next-hop processing, no next-hop-self, no-ecmp-mode3.5.d [vi] Bandwidth Pacing

▪ INE: RSv5 Workbook EIGRP Bandwidth Pacing

3.5.e Implement and troubleshoot EIGRP stub3.5.e [i] Stub

▪ INE: RSv5 Workbook EIGRP Stub Routing3.5.e [ii] Leak-map

▪ INE: RSv5 Workbook EIGRP Stub Routing with Leak Map

3.5.f Implement and troubleshoot load-balancing3.5.f [i] equal-cost3.5.f [ii] unequal-cost

▪ INE: RSv5 Workbook EIGRP Unequal Cost Load Balancing3.5.f [iii] add-path3.5.g Implement EIGRP [multi-address] Named Mode3.5.g [i] Types of families3.5.g [ii] IPv4 address-family

▪ INE: RSv5 Workbook EIGRP Multi-AF Mode

Original version available at www.neckercube.com v1.1, Page 16

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.5.g [iii] IPv6 address-family3.5.h Implement, troubleshoot and optimize EIGRP convergence and scalability3.5.h [i] Describe fast convergence requirements3.5.h [ii] Control query boundaries (summarization, stub)3.5.h [iii] IP FRR/fast reroute [single hop]

3.6 OSPF [v2 and v3]3.6.a Describe packet types3.6.a [i] LSA type 13.6.a [ii] LSA type 23.6.a [iii] LSA type 33.6.a [iv] LSA type 43.6.a [v] LSA type 53.6.a [vi] LSA type 73.6.a [vii] LSA type 93.6.a [viii] OSPFv3 LSA Types3.6.a [ix] Route type E13.6.a [x] Route type E23.6.a [xi] Route type N13.6.a [xii] Route type N23.6.b Implement and troubleshoot neighbor relationship3.6.b [i] Network statement3.6.b [ii] Interface statement3.6.c Implement and troubleshoot OSPFv3 address-family support3.6.c [i] IPv4 address-family

▪ INE: RSv5 Workbook OSPFv33.6.c [ii] IPv6 address-family3.6.d Implement and troubleshoot network types, area types and router types3.6.d [i] Network type broadcast

▪ INE: RSv5 Workbook OSPF over Broadcast Media

Original version available at www.neckercube.com v1.1, Page 17

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.6.d [ii] Network type non-broadcast▪ INE: RSv5 Workbook OSPF over DMVPN

3.6.d [iii] Network type point-to-point▪ INE: RSv5 Workbook OSPF Network Point-to-Point

3.6.d [iv] Network type point-to-multipoint▪ INE: RSv5 Workbook OSPF Network Point-to-Multipoint

3.6.d [v] Network type point-to-multipoint non-broadcast▪ INE: RSv5 Workbook OSPF Network Point-to-Multipoint Non-Broadcast

3.6.d [vi] Network type loopback▪ INE: RSv5 Workbook OSPF Network Loopback

3.6.d [vii] Area type backbone3.6.d [viii] Area type normal3.6.d [ix] Area type transit

▪ INE: RSv5 Workbook OSPF Path Selection with Non-Backbone Transit Areas3.6.d [x] Area type stub

▪ INE: RSv5 Workbook OSPF Stub Areas3.6.d [xi] Area type totally stubby

▪ INE: RSv5 Workbook OSPF Totally Stubby Areas3.6.d [xii] Area type not-so-stubby

▪ INE: RSv5 Workbook OSPF Not-So-Stubby Areas3.6.d [xiii] Not-so-stubby areas and default routing

▪ INE: RSv5 Workbook OSPF NSSA and Default Routing3.6.d [xiv] Area type not-so-totally-stubby

▪ INE: RSv5 Workbook OSPF Not-So-Totally-Stubby Areas3.6.d [xv] Stub areas with multiple exit points

▪ INE: RSv5 Workbook OSPF Stub Areas with Multiple Exit Points3.6.d [xvi] NSSA Type-7 to Type-5 Translator Election

▪ INE: RSv5 Workbook OSPF NSSA Type-7 to Type-5 Translator Election3.6.d [xvii] Router type Internal3.6.d [xviii] Router type backbone3.6.d [xix] Router type ABR3.6.d [xx] Router type ASBR3.6.d [xxi] Virtual link

▪ INE: RSv5 Workbook OSPF Discontiguous OSPF Areas With Virtual-Links▪ INE: RSv5 Workbook OSPF Path Selection with Virtual Links▪ INE: RSv5 Workbook OSPFv3 Virtual Links

3.6.d [xxii] OSPFv3 network types▪ INE: RSv5 Workbook OSPFv3 over NBMA

3.6.e Implement and troubleshoot path preference3.6.e [i] Auto-Cost

▪ INE: RSv5 Workbook OSPF Path Selection with Auto-Cost3.6.e [ii] Cost

▪ INE: RSv5 Workbook OSPF Path Selection with Cost

Original version available at www.neckercube.com v1.1, Page 18

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.6.e [iii] Bandwidth▪ INE: RSv5 Workbook OSPF Path Selection with Bandwidth

3.6.e [iv] Per-Neighbor Cost▪ INE: RSv5 Workbook Path Selection with Per-Neighbor Cost

3.6.f Implement and troubleshoot operations3.6.f [i] General operations

▪ INE: RSv5 Workbook Miscellaneous OSPF Features3.6.f [ii] Graceful shutdown3.6.f [iii] GTSM [Generic TTL Security Mechanism]3.6.f [iv] DR/BDR election manipulation

▪ INE: RSv5 Workbook OSPF DR/BDR Election Manipulation3.6.f [v] OSPF next-hop processing3.6.f [vi] Unicast vs. Multicast Hellos3.6.g Implement, troubleshoot and optimize OSPF convergence and scalability3.6.g [i] Metrics3.6.g [ii] LSA throttling, SPF tuning, fast hello3.6.g [iii] LSA propagation control [area types, ISPF]3.6.g [iv] IP FRR/fast reroute [single hop]3.6.g [v] LFA/loop-free alternative [multi hop]3.6.g [vi] Global & Interface Timers

▪ INE: RSv5 Workbook OSPF Global Timers▪ INE: RSv5 Workbook OSPF Interface Timers

3.6.g [vii] Stub Router Advertisement▪ INE: RSv5 Workbook OSPF Stub Router Advertisement

3.6.g [viii] Demand Circuit▪ INE: RSv5 Workbook OSPF Demand Circuit

3.6.g [ix] Flooding Reduction▪ INE: RSv5 Workbook OSPF Flooding Reduction

3.6.g [x] Transit Prefix Filtering3.6.g [xi] Resource Limiting

▪ INE: RSv5 Workbook OSPF Resource Limiting

3.7 BGP3.7.a Describe, implement and troubleshoot peer relationships3.7.a [i] Peer-group, template

▪ INE: RSv5 Workbook BGP Peer Groups3.7.a [ii] Active, passive3.7.a [iii] States, timers3.7.a [iv] Dynamic neighbors3.7.a [v] Update Source Modification

▪ INE: RSv5 Workbook BGP Update Source Modification

Original version available at www.neckercube.com v1.1, Page 19

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.7.a [vi] Multihop eBGP Peerings▪ INE: RSv5 Workbook Multihop eBGP Peerings

3.7.a [vii] Neighbor Disable-Connected-Check▪ INE: RSv5 Workbook Neighbor Disable-Connected-Check

3.7.a [viii] TTL Security▪ INE: RSv5 Workbook BGP Generic TTL Security Mechanism▪ INE: RSv5 Workbook BGP TTL-Security

3.7.a [ix] Path MTU Discovery3.7.a [x] Multi Session TCP Transport per AF3.7.a [xi] BGP Timers Tuning

▪ INE: RSv5 Workbook BGP Timers Tuning3.7.a [xii] BGP Fast Fallover

▪ INE: RSv5 Workbook BGP Fast Fallover

3.7.b Implement and troubleshoot iBGP and eBGP3.7.b [i] eBGP, iBGP

▪ INE: RSv5 Workbook Establishing eBGP Peerings▪ INE: RSv5 Workbook Establishing iBGP Peerings

3.7.b [ii] 4 bytes AS number3.7.b [iii] Private AS3.7.c Explain attributes and best-path selection3.7.c [i] Weight

▪ INE: RSv5 Workbook BGP Bestpath Selection - Weight3.7.c [ii] Local Preference

▪ INE: RSv5 Workbook BGP Bestpath Selection - Local Preference3.7.c [iii] AS-Path Prepending

▪ INE: RSv5 Workbook BGP Bestpath Selection - AS-Path Prepending3.7.c [iv] Origin

▪ INE: RSv5 Workbook BGP Bestpath Selection - Origin3.7.c [v] MED

▪ INE: RSv5 Workbook BGP Bestpath Selection - MED3.7.c [vi] Always Compare MED

▪ INE: RSv5 Workbook BGP Bestpath Selection - Always Compare MED3.7.c [vii] Deterministic MED3.7.c [viii] AS-Path Ignore

▪ INE: RSv5 Workbook BGP Bestpath Selection - AS-Path Ignore3.7.c [ix] Router-IDs

▪ INE: RSv5 Workbook BGP Bestpath Selection - Router-IDs3.7.c [x] DMZ Link Bandwidth

▪ INE: RSv5 Workbook BGP Bestpath Selection - DMZ Link Bandwidth3.7.c [xi] Maximum AS Limit

▪ INE: RSv5 Workbook BGP Bestpath Selection - Maximum AS Limit

Original version available at www.neckercube.com v1.1, Page 20

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.7.c [xii] Multipath3.7.d Implement, optimize and troubleshoot routing policies3.7.d [i] Attribute manipulation3.7.d [ii] Conditional advertisement

▪ INE: RSv5 Workbook BGP Conditional Advertisement3.7.d [iii] Outbound route filtering

▪ INE: RSv5 Workbook BGP Outbound Route Filtering3.7.d [iv] Communities, extended communities

▪ INE: RSv5 Workbook BGP Communities▪ INE: RSv5 Workbook BGP Communities - No-Advertise▪ INE: RSv5 Workbook BGP Communities - No-Export▪ INE: RSv5 Workbook BGP Communities - Local-AS▪ INE: RSv5 Workbook BGP Communities - Deleting

3.7.d [v] Multi-homing3.7.d [vi] BGP NLRI Origination

▪ INE: RSv5 Workbook BGP Network Statement▪ INE: RSv5 Workbook BGP Conditional Route Injection

3.7.d [vii] BGP Next Hop Processing▪ INE: RSv5 Workbook BGP Next-Hop Processing - Next-Hop-Self▪ INE: RSv5 Workbook BGP Next-Hop Processing - Manual Next-Hop

Modification▪ INE: RSv5 Workbook BGP Next-Hop Trigger

3.7.e Implement and troubleshoot scalability3.7.e [i] Route-reflector, cluster

▪ INE: RSv5 Workbook iBGP Route Reflection▪ INE: RSv5 Workbook Large-Scale iBGP Route Reflection with Clusters

3.7.e [ii] Confederations▪ INE: RSv5 Workbook iBGP Confederations

3.7.f Implement and troubleshoot multiprotocol BGP3.7.f [i] IPv4, IPv6, VPN address-family

▪ INE: RSv5 Workbook MP-BGP VPNv4▪ INE: RSv5 Workbook IPv6 MP-BGP

3.7.f [ii] MP-BGP prefix filtering▪ INE: RSv5 Workbook MP-BGP Prefix Filtering

3.7.f [iii] Multicast BGP▪ INE: RSv5 Workbook Multicast BGP Extension

3.7.g Implement and troubleshoot AS path manipulations3.7.g [i] Local AS

▪ INE: RSv5 Workbook BGP Local AS3.7.g [ii] Local AS Replace-AS / Dual-AS

▪ INE: RSv5 Workbook Local AS Replace-AS / Dual-AS

Original version available at www.neckercube.com v1.1, Page 21

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

3.7.g [iii] Allow AS in▪ INE: RSv5 Workbook BGP Allow AS In

3.7.g [iv] Remove private AS▪ INE: RSv5 Workbook BGP Remove Private AS

3.7.g [v] AS Override3.7.g [vi] Prepend3.7.g [vii] Regexp

▪ INE: RSv5 Workbook BGP Regular Expressions

3.7.h Implement and troubleshoot other features3.7.h [i] BGP synchronization

▪ INE: RSv5 Workbook iBGP Synchronization3.7.h [ii] Soft reconfiguration, route refresh

▪ INE: RSv5 Workbook BGP Soft Reconfiguration3.7.h [iii] BGP over GRE

▪ INE: RSv5 Workbook BGP over GRE3.7.h [iv] BGP Backdoor

▪ INE: RSv5 Workbook BGP Backdoor3.7.h [v] BGP Dampening, including with Route-Map

▪ INE: RSv5 Workbook BGP Dampening▪ INE: RSv5 Workbook BGP Dampening with Route-Map

3.7.i Describe BGP fast convergence features (W)3.7.i [i] Prefix Independent Convergence (W)3.7.i [ii] Add-path (W)3.7.i [iii] Next-hop address tracking (W)

3.8 IS-IS [for IPv4 and IPv6] (W)3.8.a Describe basic IS-IS network (W)3.8.a [i] Single area, single topology (W)

▪ INE: SPv4 Workbook Single-Level IS-IS

3.8.b Describe neighbor relationship (W)3.8.c Describe network types, levels and router types (W)3.8.c [i] NSAP addressing (W)3.8.c [ii] Point-to-point, broadcast (W)

▪ INE: SPv4 Workbook IS-IS Network Types

3.8.d Describe operations (W)3.8.d [i] Describe optimization features (W)3.8.d [ii] Metrics, wide metric (W)

▪ INE: SPv4 Workbook IS-IS Path Selection

Original version available at www.neckercube.com v1.1, Page 22

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

4.0 VPN Technologies 13%4.1 Tunneling4.1.a Implement and troubleshoot MPLS operations4.1.a [i] Label stack, LSR, LSP4.1.a [ii] LDP

▪ INE: RSv5 Workbook MPLS LDP4.1.a [iii] MPLS ping, MPLS traceroute4.1.a [iv] MPLS label filtering

▪ INE: RSv5 Workbook MPLS Label Filtering

4.1.b Implement and troubleshoot basic MPLS L3VPN4.1.b [i] L3VPN, CE, PE, P

▪ INE: SPv4 Workbook Basic MPLS Tunnels4.1.b [ii] Extranet [route leaking]4.1.b [iii] PE-CE routing with RIP

▪ INE: RSv5 Workbook PE-CE Routing with RIP4.1.b [iv] PE-CE routing with OSPF, including Sham-Link

▪ INE: RSv5 Workbook PE-CE Routing with OSPF▪ INE: RSv5 Workbook OSPF Sham-Link

4.1.b [v] PE-CE routing with EIGRP, including SoO Site of Origin▪ INE: PE-CE Routing with EIGRP▪ INE: RSv5 Workbook EIGRP Site-of-Origin

4.1.b [vi] PE-CE routing with BGP, including SoO Site of Origin▪ INE: RSv5 Workbook PE-CE Routing with BGP▪ INE: RSv5 Workbook BGP SoO Attribute

4.1.b [vii] Internet access▪ INE: RSv5 Workbook Internet Access

4.1.b [viii] MPLS VPN performance tuning▪ INE: RSv5 Workbook MPLS VPN Performance Tuning

4.1.c Implement and troubleshoot encapsulation4.1.c [i] GRE

▪ INE: RSv5 Workbook GRE Tunneling4.1.c [ii] Dynamic GRE4.1.c [iii] LISP encapsulation principles supporting EIGRP OTP (W)

▪ INE: SPv4 Workbook LISP - Basic Overlay IPv4 to IPv4▪ INE: SPv4 Workbook LISP - IPv6 over IPv4 Core

4.1.c [iv] IP-in-IP tunnels4.1.c [v] Tunnels and recursive routing errors

▪ INE: RSv5 Workbook GRE Tunneling and Recursive Routing

4.1.d Implement and troubleshoot DMVPN [single hub]

Original version available at www.neckercube.com v1.1, Page 23

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

4.1.d [i] NHRP4.1.d [ii] DMVPN with IPsec using preshared key, including Phase 1, 2 & 3

▪ INE: RSv5 Workbook DMVPN Without IPsec▪ INE: RSv5 Workbook DMVPN With IPsec▪ INE: RSv5 Workbook DMVPN Phase 1 with OSPF▪ INE: RSv5 Workbook DMVPN Phase 1 with EIGRP▪ INE: RSv5 Workbook DMVPN Phase 2 with EIGRP▪ INE: RSv5 Workbook DMVPN Phase 2 with OSPF▪ INE: RSv5 Workbook DMVPN Phase 3 with EIGRP▪ INE: RSv5 Workbook VRF-Aware DMVPN

4.1.d [iii] QoS profile4.1.d [iv] QoS Pre-classify

▪ INE: RSv5 Workbook QoS Pre-Classify

4.1.e Describe IPv6 tunneling techniques (W)4.1.e [i] 6in4, 6to4 (W)

▪ INE: RSv5 Workbook IPv6 Tunneling▪ INE: RSv5 Workbook Automatic 6to4 Tunneling

4.1.e [ii] ISATAP (W)▪ INE: RSv5 Workbook ISATAP Tunneling

4.1.e [iii] 6RD (W)4.1.e [iv] 6PE/6VPE (W)

▪ INE: SPv4 Workbook MPLS L3VPN 6PE▪ INE: SPv4 Workbook MPLS L3VPN 6VPE

4.1.f Describe basic Layer 2 VPN —wireline (W)4.1.f [i] L2TPv3 general principals (W)

▪ INE: RSv4 Workbook Vol 1 Sec 14.15 L2TPv34.1.f [ii] ATOM general principals (W)

▪ INE: RSv4 Workbook Vol 1 Sec 14.14 AToM

4.1.g Describe basic L2VPN — LAN services (W)4.1.g [i] MPLS-VPLS general principals (W)

▪ INE: SPv4 Workbook MPLS L2VPN - VPLS - Multipoint Service▪ INE: SPv4 Workbook MPLS L2VPN - H-VPLS - Multipoint Service

4.1.g [ii] OTV general principals (W)

4.2 Encryption4.2.a Implement and troubleshoot IPsec with preshared key

Original version available at www.neckercube.com v1.1, Page 24

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

4.2.a [i] IPv4 site to IPv4 site, including ISAKMP policies, PSK authentication, static crypto maps

▪ INE: RSv5 Workbook IPsec VPNs with Crypto Maps4.2.a [ii] IPv6 in IPv4 tunnels4.2.a [iii] Virtual Tunneling Interface [VTI]

▪ INE: RSv5 Workbook IPsec Virtual Tunnel Interfaces (VTIs)4.2.a [iv] IPsec over GRE

▪ INE: RSv5 Workbook GRE over IPsec with Crypto Maps▪ INE: RSv5 Workbook GRE over IPsec with Crypto Profiles

4.2.b Describe GET VPN (W)

Original version available at www.neckercube.com v1.1, Page 25

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

5.0 Infrastructure Security 5%5.1 Device Security5.1.a Implement and troubleshoot IOS AAA using local database5.1.a [i] AAA authentication lists

▪ INE: RSv5 Workbook AAA Authentication Lists5.1.a [ii] AAA EXEC authorization

▪ INE: RSv5 Workbook AAA Exec Authorization5.1.a [iii] AAA local command authorization

▪ INE: RSv5 Workbook AAA Local Command Authorization5.1.a [iv] Role-based CLI

▪ INE: RSv5 Workbook Role-Based CLI

5.1.b Implement and troubleshoot device access control5.1.b [i] Lines [VTY, AUX, console]

▪ INE: RSv5 Workbook Controlling Terminal Line Access5.1.b [ii] SNMP

▪ INE: Security v4 Workbook IOS SNMPv2▪ INE: Security v4 Workbook IOS SNMPv3

5.1.b [iii] Management plane protection▪ INE: Security v4 Workbook Management Plane Protection

5.1.b [iv] Service Password Encryption5.1.b [v] IOS login enhancements

▪ INE: RSv5 Workbook IOS Login Enhancements

5.1.c Implement and troubleshoot Control Plane Policing5.1.c [i] Controlling the ICMP messages rate

▪ INE: RSv5 Workbook Controlling the ICMP Messages Rate5.1.c [ii] Control Plane Policing (CoPP)

▪ INE: RSv5 Workbook Control Plane Policing5.1.c [iii] Control Plane Protection (CPPr)

▪ INE: RSv4 Workbook Vol 1 Sec 11.35 Control Plane Protection (CPPr)5.1.c [iv] Control plane host5.1.d Describe device security using IOS AAA with TACACS+ and RADIUS (W)5.1.d [i] AAA with TACACS+ and RADIUS (W)

▪ INE: Security v4 Workbook IOS TACACS Command Authorization and Accounting

5.1.d [ii] Local privilege authorization fallback (W)

5.2 Network Security5.2.a Implement and troubleshoot switch security features

Original version available at www.neckercube.com v1.1, Page 26

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

5.2.a [i] Protected Ports▪ INE: RSv5 Workbook Protected Ports

5.2.a [ii] PACL▪ INE: CCIE Security v4 Technologies Workbook Sec 2: Threat Identification

and Mitigation: Switch Port ACL5.2.a [iii] VACL (IP and non-IP)

▪ INE: RSv5 Workbook VLAN Filtering for IP Traffic▪ INE: RSv5 Workbook VLAN Filtering for Non-IP Traffic

5.2.a [iv] Storm Control▪ INE: RSv5 Workbook Storm Control

5.2.a [v] DHCP Snooping (+ Information Option)▪ INE: RSv5 Workbook DHCP Snooping▪ INE: RSv5 Workbook DHCP Snooping and the Information Option

5.2.a [vi] IP Source Guard▪ INE: RSv5 Workbook IP Source Guard

5.2.a [vii] Dynamic ARP Inspection▪ INE: RSv5 Workbook Dynamic ARP Inspection

5.2.a [viii] Port-Security (+HSRP interaction)▪ INE: RSv5 Workbook Port Security▪ INE: RSv5 Workbook HSRP and Port Security

5.2.a [ix] Private VLAN (+interaction with VTPv3)▪ INE: RSv5 Workbook Private VLANs

5.2.a [x] Catalyst Ingress Access Lists▪ INE: RSv5 Workbook Using Catalyst Ingress Access Lists

5.2.b Implement and troubleshoot router security features5.2.b [i] IPv4 access control lists [standard, extended, time-based, reflexive, dynamic]

▪ INE: RSv5 Workbook Traffic Filtering Using Standard Access-Lists▪ INE: RSv5 Workbook Traffic Filtering Using Extended Access-Lists▪ INE: RSv5 Workbook Filtering Traffic with Time-Based Access-Lists▪ INE: RSv4 Workbook Vol 1 Sec 11.6 Traffic Filtering Using Reflexive Access-

Lists▪ INE: RSv4 Workbook Vol 1 Sec 11.8 Filtering Packets with Dynamic Access-

Lists5.2.b [ii] IPv6 traffic filter5.2.b [iii] Unicast reverse path forwarding

▪ INE: RSv5 Workbook Preventing Packet Spoofing with uRPF5.2.b [iv] Filtering Fragmented Packets

▪ INE: RSv5 Workbook Filtering Fragmented Packets5.2.b [v] Traffic Filtering with Policy-Based Routing

▪ INE: RSv5 Workbook Traffic Filtering with Policy-Based Routing5.2.b [vi] Using NBAR for Content-Based Filtering

▪ INE: RSv5 Workbook Using NBAR for Content-Based Filtering5.2.b [vii] TCP Intercept

▪ INE: RSv4 Workbook Vol 1 Sec 11.13 TCP Intercept

Original version available at www.neckercube.com v1.1, Page 27

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

5.2.b [viii] TCP Intercept Watch Mode▪ INE: RSv4 Workbook Vol 1 Sec 11.14 TCP Intercept Watch Mode

5.2.b [ix] Packet Logging with Access-Lists▪ INE: RSv5 Workbook Packet Logging with Access-Lists

5.2.b [x] IP Source Tracker▪ INE: RSv4 Workbook Vol 1 Sec 11.31 IP Source Tracker

5.2.b [xi] Router IP Traffic Export (RITE)▪ INE: RSv4 Workbook Sec 11.32 Router IP Traffic Export

5.2.b [xii] IOS ACL Selective IP Option Drop▪ INE: RSv5 Workbook IOS ACL Selective IP Option Drop

5.2.b [xiii] Flexible Packet Matching▪ INE: RSv4 Workbook Vol 1 Sec 11.38 Flexible Packet Matching

5.2.c Implement and troubleshoot IPv6 first hop security5.2.c [i] RA Guard

▪ INE: Security v4 Workbook IPv6 RA Guard5.2.c [ii] DHCP Guard

▪ INE: Security v4 Workbook IPv6 DHCPv6 Guard5.2.c [iii] Binding table5.2.c [iv] Device tracking

▪ INE: Security v4 Workbook IPv6 Snooping5.2.c [v] ND inspection/snooping

▪ INE: Security v4 Workbook IPv6 Secure Neighbor Discovery5.2.c [vi] Source Guard5.2.c [vii] PACL

5.2.d Describe 802.1x (W)5.2.d [i] 802.1x, EAP, RADIUS (W)

▪ INE: Security v4 Workbook IOS RADIUS Authentication

Original version available at www.neckercube.com v1.1, Page 28

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

6.0 Infrastructure Services 12%6.1 System Management6.1.a Implement and troubleshoot device management6.1.a [i] Console and VTY

▪ INE: RSv5 Workbook Terminal Line Settings6.1.a [ii] Telnet (including service options), HTTP, HTTPS, SSH, SCP

▪ INE: RSv5 Workbook Telnet Service Options▪ INE: RSv5 Workbook HTTP Server and Client

6.1.a [iii] [T]FTP▪ INE: RSv5 Workbook TFTP Server and Client▪ INE: RSv5 Workbook FTP Server and Client

6.1.a [iv] Configuration archive and rollback▪ INE: RSv5 Workbook Configuration Archive and Rollback

6.1.a [v] Auto-Install over LAN Interfaces using DHCP▪ INE: RSv4 Workbook Vol 1 Sec 12.32 Auto-Install over LAN Interfaces Using

DHCP6.1.a [vi] Auto-Install over LAN Interfaces Using RARP

▪ INE: RSv4 Workbook Vol 1 Sec 12.34 Auto-Install over LAN Interfaces Using RARP

6.1.a [vii] IOS Menus▪ INE: RSv4 Workbook Vol 1 Sec 12.35 IOS Menus

6.1.a [viii] IOS Banners▪ INE: RSv4 Workbook Vol 1 Sec 12.36 IOS Banners

6.1.a [ix] Exec Aliases▪ INE: RSv5 Workbook Exec Aliases

6.1.a [x] TCP Keepalives▪ INE: RSv5 Workbook TCP Keepalives

6.1.a [xi] Generating Exception Core Dumps▪ INE: RSv4 Workbook Vol 1 Sec 12.10 Generating Exception Core Dumps

6.1.a [xii] Tuning Packet Buffers▪ INE: RSv5 Workbook Tuning Packet Buffers

6.1.a [xiii] Remote Shell▪ INE: RSv5 Workbook Remote Shell

6.1.a [xiv] IOS resilient configuration6.1.b Implement and troubleshoot SNMP6.1.b [i] v2c, v3

▪ INE: RSv5 Workbook SNMPv36.1.b [ii] SNMPv2 Server

▪ INE: RSv5 Workbook SNMPv2 Server6.1.b [iii] SNMPv2c access control

▪ INE: RSv5 Workbook SNMPv2c Access Control

Original version available at www.neckercube.com v1.1, Page 29

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

6.1.b [iv] SNMP traps and informs▪ INE: RSv5 Workbook SNMP Traps and Informs

6.1.b [v] CPU and memory thresholds▪ INE: RSv5 Workbook CPU and Memory Thresholds

6.1.b [vi] SNMP MAC address notifications▪ INE: RSv5 Workbook SNMP MAC Address Notifications

6.1.b [vii] SNMP notifications of syslog messages▪ INE: RSv5 Workbook SNMP Notifications of Syslog Messages

6.1.c Implement and troubleshoot logging6.1.c [i] Local logging, syslog, debug, conditional debug

▪ INE: RSv5 Workbook System Message Logging▪ INE: RSv5 Workbook Syslog Logging

6.1.c [ii] Timestamp and logging counting▪ INE: RSv5 Workbook Logging Counting and Timestamps

6.1.c [iii] Logging to flash memory▪ INE: RSv5 Workbook Logging to Flash Memory

6.1.c [iv] Configuration change notification and logging▪ INE: RSv5 Workbook Configuration Change Notification and Logging

6.1.c [v] Logging with access-lists▪ INE: RSv5 Workbook Logging with Access-Lists

6.2 Quality of Service6.2.a Implement and troubleshoot end-to-end QoS6.2.a [i] CoS and DSCP mapping6.2.b Implement, optimize and troubleshoot QoS using MQC6.2.b [i] Classification

▪ INE: RSv5 Workbook MQC Classification and Marking6.2.b [ii] Network Based Application Recognition [NBAR]

▪ INE: RSv5 Workbook Advanced HTTP Classification with NBAR▪ INE: RSv5 Workbook Using NBAR for Content-Based Matching

6.2.b [iii] Marking using IP Precedence, DSCP, CoS, ECN▪ INE: RSv5 Workbook MQC Classification and Marking

6.2.b [iv] Policing, shaping6.2.b [iv] Policing

▪ INE: RSv5 Workbook MQC Single-Rate Three-Color Policer▪ INE: RSv5 Workbook MQC Two-Rate Three-Color Policer▪ INE: RSv5 Workbook MQC Hierarchical Policers▪ INE: RSv5 Workbook MQC Percent-Based Policing

6.2.b [iv] Shaping▪ INE: RSv4 Workbook Vol 1 Sec 10.27 MQC Peak Shaping▪ INE: RSv5 Workbook MQC Class-Based Generic Traffic Shaping▪ INE: RSv5 Workbook MQC Class-Based GTS and CBWFQ▪ INE: RSv4 Workbook Vol 1 Sec 10.35 Voice Adaptive Traffic Shaping

Original version available at www.neckercube.com v1.1, Page 30

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

6.2.b [v] Congestion management [queuing], WFQ, CBWFQ, LLQ, bandwidth reservations, bandwidth percent

▪ INE: RSv4 Workbook Vol 1 Sec 10.2 Weighted Fair Queuing (WFQ)▪ INE: RSv5 Workbook MQC Bandwidth Reservations and CBWFQ▪ INE: RSv5 Workbook MQC Bandwidth Percent▪ INE: RSv5 Workbook MQC LLQ and Remaining Bandwidth Reservations

6.2.b [vi] HQoS, sub-rate Ethernet link6.2.b [vi] HQoS6.2.b [vi] Sub-rate Ethernet link

6.2.b [vii] Congestion avoidance [WRED], ECN, Dynamic flows▪ INE: RSv5 Workbook MQC WRED▪ INE: RSv5 Workbook MQC Dynamic Flows and WRED▪ INE: RSv5 Workbook MQC WRED With ECN▪ INE: RSv4 Workbook Vol 1 Sec 10.29 MQC Header Compression▪ INE: RSv4 Workbook Vol 1 Sec 10.36 MQC Voice Adaptive Fragmentation

6.2.b [viii] Selective packet discard▪ INE: RSv4 Workbook Vol 1 Sec 10.3 Selective Packet Discard

6.2.b [ix] Hold-queue and Tx-Ring▪ INE: RSv4 Workbook Vol 1 Sec 10.1 Hold-queue and Tx-ring

6.2.b [x] Generic TCP/UDP header compression▪ INE: RSv4 Workbook Vol 1 Sec 10.5 Generic TCP/UDP Header Compression

6.2.c Describe Layer 2 QoS (W)6.2.c [i] Queuing, scheduling (W)

▪ INE: RSv4 Workbook Vol 1 Sec 10.51 Catalyst 3560 Ingress Queuing▪ INE: RSv4 Workbook Vol 1 Sec 10.52 Catalyst 3560 Ingress Queue Tuning▪ INE: RSv4 Workbook Vol 1 Sec 10.53 Catalyst 3550 Egress Queuing▪ INE: RSv4 Workbook Vol 1 Sec 10.54 Catalyst 3560 SRR Shared Mode▪ INE: RSv4 Workbook Vol 1 Sec 10.55 Catalyst 3560 SRR Shaped Mode▪ INE: RSv4 Workbook Vol 1 Sec 10.56 Catalyst 3560 Egress Queues Tuning

6.2.c [ii] Classification, marking (W)▪ INE: RSv4 Workbook Vol 1 Sec 10.44 Catalyst QoS Port-Based Classification▪ INE: RSv4 Workbook Vol 1 Sec 10.45 Marking Pass-Through▪ INE: RSv4 Workbook Vol 1 Sec 10.46 Catalyst QoS ACL-based Classification

and Marking▪ INE: RSv4 Workbook Vol 1 Sec 10.47 Catalyst 3560 Per-VLAN Classification▪ INE: RSv4 Workbook Vol 1 Sec 10.48 Catalyst QoS Port-Based Policing and

Marking▪ INE: RSv4 Workbook Vol 1 Sec 10.49 Catalyst 3560 Per-Port Per-VLAN

Policing▪ INE: RSv4 Workbook Vol 1 Sec 10.50 Catalyst QoS Aggregate Policers▪ INE: RSv4 Workbook Vol 1 Sec 10.57 Catalyst QoS DSCP Mutation

6.2.c [iii] Payload compression on serial links (W)▪ INE: RSv4 Workbook Vol 1 Sec 10.4 Payload Compression on Serial Links

6.2.c [iv] MLPPP LFI Link Fragmentation and Interleaving (W)▪ INE: RSv4 Workbook Vol 1 Sec 10.6 MLP Link Fragmentation and Interleaving

Original version available at www.neckercube.com v1.1, Page 31

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

6.3 Network Services6.3.a Implement and troubleshoot first-hop redundancy protocols6.3.a [i] HSRP

6.3.a [i] HSRP v1 and v2▪ INE: RSv5 Workbook HSRP

6.3.a [i] HSRP BFD Peering6.3.a [i] HSRP Group Shutdown6.3.a [i] HSRP MD5 Authentication6.3.a [i] HSRP Support for ICMP Redirects6.3.a [i] HSRP Support for MPLS VPNs6.3.a [i] HSRP Multiple Group Optimization

6.3.a [ii] VRRP6.3.a [ii] VRRPv2

▪ INE: RSv5 Workbook VRRP6.3.a [ii] VRRPv3

6.3.a [iii] GLBP▪ INE: RSv4 Workbook Vol 1 Sec 13.14 GLBP

6.3.a [iv] Redundancy using IPv6 RS/RA6.3.a [v] Router redundancy and object tracking

▪ INE: RSv5 Workbook Router Redundancy and Object Tracking

6.3.b Implement and troubleshoot Network Time Protocol6.3.b [i] NTP master, client, version 3, version 4

▪ INE: RSv5 Workbook NTP6.3.b [ii] NTP Authentication

▪ INE: RSv5 Workbook NTP Authentication6.3.b [iii] NTP access control

▪ INE: RSv5 Workbook NTP Access Control

6.3.c Implement and troubleshoot IPv4 and IPv6 DHCP6.3.c [i] DHCP client, IOS DHCP server, DHCP relay

▪ INE: RSv4 Workbook Vol 1 Sec 13.3 DHCP Client▪ INE: RSv4 Workbook Vol 1 Sec 13.2 DHCP Server▪ INE: RSv4 Workbook Vol 1 Sec 13.4 DHCP Relay

Original version available at www.neckercube.com v1.1, Page 32

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

6.3.c [ii] DHCP options6.3.c [iii] DHCP protocol operations6.3.c [iv] SLAAC/DHCPv6 interaction6.3.c [v] Stateful, stateless DHCPv66.3.c [vi] DHCPv6 prefix delegation6.3.c [vii] DHCP host pools

▪ INE: RSv4 Workbook Vol 1 Sec 13.5 DHCP Host Pools6.3.c [viii] DHCP on-demand pool

▪ INE: RSv4 Workbook Vol 1 Sec 13.6 DHCP On-Demand Pool6.3.c [ix] DHCP proxy

▪ INE: RSv4 Workbook Vol 1 Sec 13.7 DHCP Proxy6.3.c [x] DHCP Information Option

▪ INE: RSv4 Workbook Vol 1 Sec 13.8 DHCP Information Option6.3.c [xi] DHCP Authorized ARP

▪ INE: RSv4 Workbook Vol 1 Sec 13.9 DHCP Authorized ARP

6.3.d Implement and troubleshoot IPv4 Network Address Translation6.3.d [i] Basic NAT

▪ INE: RSv5 Workbook Basic NAT6.3.d [ii] NAT Overload

▪ INE: RSv5 Workbook NAT Overload6.3.d [iii] NAT with Route Maps

▪ INE: RSv5 Workbook NAT with Route Maps6.3.d [iv] Static NAT

▪ INE: RSv5 Workbook Static NAT6.3.d [v] Static PAT

▪ INE: RSv5 Workbook Static PAT6.3.d [vi] Static NAT and IP Aliasing

▪ INE: RSv5 Workbook Static NAT and IP Aliasing6.3.d [vii] Static Policy NAT

▪ INE: RSv5 Workbook Static Policy NAT6.3.d [viii] NAT with Overlapping Subnets

▪ INE: RSv4 Workbook Vol 1 Sec 13.25 NAT with Overlapping Subnets6.3.d [ix] TCP Load Distribution with NAT

▪ INE: RSv5 Workbook TCP Load Distribution with NAT6.3.d [x] Stateful NAT with HSRP

▪ INE: RSv4 Workbook Vol 1 Sec 13.27 Stateful NAT with HSRP6.3.d [xi] Stateful NAT with Primary/Backup

▪ INE: RSv4 Workbook Vol 1 Sec 13.28 Stateful NAT with Primary / Backup6.3.d [xii] NAT Virtual Interface

▪ INE: RSv4 Workbook Vol 1 Sec 13.29 NAT Virtual Interface6.3.d [xiii] NAT Default Interface

▪ INE: RSv5 Workbook NAT Default Interface6.3.d [xiv] Reversible NAT

▪ INE: RSv5 Workbook Reversible NAT

Original version available at www.neckercube.com v1.1, Page 33

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

6.3.d [xv] Static Extendable NAT▪ INE: RSv5 Workbook Static Extendable NAT

6.3.d [xvi] NAT ALG6.3.e Describe IPv6 Network Address Translation (W)6.3.e [i] NAT64 (W)6.3.e [ii] NPTv6 (W)

▪ INE: RSv4 Workbook Vol 1 Sec 9.23 IPv6 NAT-PT

6.3.f Implement and troubleshoot DNS6.3.f [i] IOS authoritative DNS server

▪ INE: RSv4 Workbook Vol 1 Sec 13.49 IOS Authoritative DNS Server6.3.f [ii] IOS caching DNS server

▪ INE: RSv4 Workbook Vol 1 Sec 13.50 IOS Caching DNS Server6.3.f [iii] IOS DNS spoofing

▪ INE: RSv5 Workbook IOS DNS Spoofing

6.3.g Implement and troubleshoot traffic accounting6.3.g [i] IP precedence accounting

▪ INE: RSv4 Workbook Vol 1 Sec 13.33 IP Precedence Accounting6.3.g [ii] IP output packet accounting

▪ INE: RSv4 Workbook Vol 1 Sec 13.34 IP Output Packet Accounting6.3.g [iii] IP access violation accounting

▪ INE: RSv4 Workbook Vol 1 Sec 13.35 IP Access Violation Accounting6.3.g [iv] MAC address accounting

▪ INE: RSv4 Workbook Vol 1 Sec 13.36 MAC Address Accounting

6.3.h Implement and troubleshoot miscellaneous network services6.3.h [i] Backup interfaces

▪ INE: RSv4 Workbook Sec 3.5 Backup Interfaces▪ INE: RSv5 Workbook GRE Backup Interface▪ INE: RSv5 Workbook GRE Reliable Backup Interface

6.3.h [ii] Proxy ARP▪ INE: RSv4 Workbook Vol 1 Sec 13.1 Proxy ARP

6.3.h [iii] IRDP▪ INE: RSv4 Workbook Vol 1 Sec 13.16 IRDP

6.3.h [iv] Router ICMP Settings▪ INE: RSv5 Workbook Router ICMP Settings

6.3.h [v] IOS Small Services and Finger▪ INE: RSv5 Workbook IOS Small Services and Finger

6.3.h [vi] Directed Broadcasts and UDP Forwarding▪ INE: RSv5 Workbook Directed Broadcasts and UDP Forwarding

6.3.h [vii] NBAR Protocol Discovery▪ INE: RSv5 Workbook NBAR Protocol Discovery

6.3.h [viii] IP Event Dampening▪ INE: RSv5 Workbook IP Event Dampening

Original version available at www.neckercube.com v1.1, Page 34

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

6.4 Network Optimization6.4.a Implement and troubleshoot IP SLA6.4.a [i] ICMP, UDP, Jitter, VoIP

▪ INE: RSv4 Workbook Vol 1 Sec 13.10 IP SLA

6.4.b Implement and troubleshoot tracking object6.4.b [i] Tracking object, tracking list

▪ INE: RSv4 Workbook Sec 13.11 Object Tracking6.4.b [ii] Tracking different entities [e.g. interfaces, routes, IPSLA, etc.]

▪ INE: RSv5 Workbook Reliable Static Routing with Enhanced Object Tracking

6.4.c Implement and troubleshoot NetFlow6.4.c [i] Netflow v5 & v9

▪ INE: Security v4 Workbook IOS Netflow Statistics6.4.c [ii] Netflow Ingress and Egress

▪ INE: RSv4 Workbook Vol 1 Sec 13.44 Netflow Ingress and Egress6.4.c [iii] Netflow Top Talkers

▪ INE: RSv4 Workbook Vol 1 Sec 13.45 Netflow Top Talkers6.4.c [iv] Netflow Aggregation Cache

▪ INE: RSv4 Workbook Vol 1 Sec 13.46 Netflow Aggregation Cache6.4.c [v] Netflow Random Sampling

▪ INE: RSv4 Workbook Vol 1 Sec 13.47 Netflow Random Sampling6.4.c [vi] Netflow Input Filters

▪ INE: RSv4 Workbook Vol 1 Sec 13.48 Netflow Input Filters6.4.c [vii] Local retrieval6.4.c [viii] Netflow Export (configuration only)6.4.d Implement and troubleshoot Embedded Event Manager6.4.d [i] KRON Command Schedule

▪ INE: RSv4 Workbook Vol 1 Sec 12.37 KRON Command Schedule6.4.d [ii] EEM Scripting: Interface Events

▪ INE: RSv4 Workbook Vol 1 Sec 12.38 EEM Scripting: Interface Events6.4.d [iii] EEM Scripting: Syslog Events

▪ INE: RSv4 Workbook Vol 1 Sec 12.39 EEM Scripting: Syslog Events6.4.d [iv] EEM Scripting: CLI Events

▪ INE: RSv4 Workbook Vol 1 Sec 12.40 EEM Scripting: CLI Events6.4.d [v] EEM Scripting: Periodic Scheduling

▪ INE: RSv4 Workbook Vol 1 Sec 12.41 EEM Scripting: Periodic Scheduling6.4.d [vi] EEM Scripting: Advanced Features

▪ INE: RSv4 Workbook Vol 1 Sec 12.42 EEM Scripting: Advanced Features6.4.d [vii] EEM Applets6.4.e Identify Performance Routing [PfR] (W)

Original version available at www.neckercube.com v1.1, Page 35

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

6.4.e [i] Basic load balancing (W)6.4.e [ii] Voice optimization (W)

Original version available at www.neckercube.com v1.1, Page 36

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

7.0 Evolving Technologies 10% (W)7.1 Cloud7.1.a Compare and contrast Cloud deployment models7.1.a [i] Infrastructure, Platform, and Software services [XaaS]7.1.a [ii] Performance and reliability7.1.a [iii] Security and privacy7.1.a [iv] Scalability and interoperability7.1.b Describe Cloud implementations and operations7.1.b [i] Automation and orchestration7.1.b [ii] Workload mobility7.1.b [iii] Troubleshooting and management7.1.b [iv] OpenStack components

7.2 Network Programmability [SDN]7.2.a Describe functional elements of network programmability [SDN] and how they interact7.2.a [i] Controllers7.2.a [ii] APIs7.2.a [iii] Scripting7.2.a [iv] Agents7.2.a [v] Northbound vs. Southbound protocols7.2.b Describe aspects of virtualization and automation in network environments7.2.b [i] DevOps methodologies, tools and workflows7.2.b [ii] Network/Application Function Virtualization [NFV, AFV]7.2.b [iii] Service function chaining7.2.b [iv] Performance, availability, and scaling considerations

7.3 Internet of Things7.3.a Describe architectural framework and deployment considerations for Internet of Things [IoT]

Original version available at www.neckercube.com v1.1, Page 37

CCIE Routing & Switching v5.1 Combined Expanded Blueprint

7.3.a [i] Performance, reliability and scalability7.3.a [ii] Mobility7.3.a [iii] Security and privacy7.3.a [iv] Standards and compliance7.3.a [v] Migration7.3.a [vi] Environmental impacts on the network

Original version available at www.neckercube.com v1.1, Page 38