11814 flowflex catalogue
TRANSCRIPT
Flowflex Group of Companies
Samuel Blaser Works
Dew Pond Lane
Tongue Lane Industrial Estate
Buxton SK17 7LR
England
Telephone: +44 (0) 1298 77211
Facsimile: +44 (0) 1298 72362
E-mail: [email protected]
Zertifizierungsstelle
GASTEC
Made in the U.K.
FLX 02/03
FM 54582
thecompany
2 3
For almost fifty years the Flowflex name has been
synonymous with the manufacture and supply of high quality
components and fittings for use in all applications in the
plumbing and heating trade.
The well established brand names under the Flowflex
banner are shipped not only throughout Europe but to other
major markets in the Middle and Far East.
Distributing a wide range of both compression and copper
connections in a variety of types and styles as well as valves
and specialist fabricated units for use by original equipment
manufacturers.
Recent investment in new plant and new developments in
the internal sales office, order processing and distribution
have all been undertaken to ensure the quality of service and
support to customers is continually improved.
The factory is situated in the heart of the United Kingdom,
manufacturing from a single 6 acre site with easy access to
international road, rail, air and sea links.
Flowflex demonstrates its ability to supply consistently high
quality by its ISO 9002 quality management system and
manufacture to EN1254 and BS864 standards.
Zertifizierungsstelle
GASTEC
FM 54582
Page 95Jointing techniques
Pages 6 - 46
Page 6Ordering Information
Page 12Straight fittings
Page 19Elbows
Page 25Tees
Pages 32Components and accessories
Page 44Valves and stopcocks
Page 46Jointing techniques
Pages 48-57
Page 50
Compression fittings
Pages 58-59
Compression fittings
Straight fittings
Page 52Elbows
Page 54Tees
Page 55Components and accessories
Page 56Jointing techniques
Page 77Jointing techniques
Pages 60-77
Page 64Straight fittings
Page 68Elbows
Page 71Tees
Page 75Components and accessories
Pages 78-95
Page 82Straight fittings
Page 86Elbows
Page 89Tees
Page 93Components and accessories
Pages 96-99
Page 98Manual radiator valves
Page 99Thermostatic radiator valves
Pages100-109
Page 102Valves, cocks and manifolds
Page 108Flexible tap connectors
Page 109PTFE Tape
cont
ents5
cont
ents
4
7
straight fittingselbowsteescomponents and accessoriesvalves and stopcocks
Flowflex compression pipe fittings are available in standard brass
and DZR brass, manufactured to EN 1254 and BS864 for use with
copper and stainless steel tube on hot and cold water services
and heating installations.
The range is complemented by a wide selection of valves and
accessories.
compression fittings inBrass and DZR
MADE IN THE UK WRC APPROVED6
Guidelines for ordering purposes:
To order a 15mm straight coupling in StandardBrass, DZR Brass, Natural or Chrome Platefinish, please see examples below:
P901-05 - Standard Brass
P901DR-05 - DZR Brass
P901CP-05 - Standard Brass Chrome Plated
P901DRCP-05 - DZR Brass Chrome Plated
ster
ling
rang
e
8 9st
erlin
g ra
nge
P901.02 8 Straight Coupler
P901.03 10
P901.05 15
P901.08 22
P901.09 28
P901.17 15 x 8
P901.18 15 x 10
P901.19 15 x 12
P901.20 22 x 15
P902.04 8 x 1/4 M Male Iron Straight
P902.07 10 x 1/4 M
P902.15 15 x 1/2 M
P902.17 15 x 3/4 M
P902.21 22 x 3/4 M
P902.22 22 x 1 M
P902.23 28 x 1 M
P903.01 8 x 1/4 F Female Iron Straight
P903.04 10 x 1/4 F
P903.12 15 x 1/2 F
P903.18 22 x 3/4 F
P903.19 22 x 1 F
P903.20 28 x 1 F
P903SF.1 15 x 1/2 F Straight Tap Connector
P903SF.3 22 x 3/4 F
P921.1 15 Flanged Tank Connector
P921.2 22
P921.3 28
P923.4 15 Stop End
P923.5 22
P801.02 8 Equal Elbow
P801.03 10
P801.05 15
P801.08 22
P801.09 28
P802.08 15 x 1/2 M Male Iron Elbow
P802.12 22 x 3/4 M
P802.13 22 x 1 M
P802.14 28 x 1 M
P803.06 15 x 1/2 F Female Iron Elbow
P803.07 22 x 3/4 M
P803.08 22 x 1 F
P803.09 28 x 1 F
P803SF.1 15 x 1/2 F Bent Tap Connector
P803SF.2 22 x 3/4 F
P803WP.2 15 x 1/2 F Wallplate Elbow
P701.02 8 Equal Tee
P701.03 10
P701.05 15
P701.08 22
P701.09 28
P702.16 22 x 22 x 15 Reducing Tee
P702.20 28 x 28 x 22
P703.15 22 x 15 x 22
P704.14 22 x 15 x 15
P717.1 15 x 15 x 1/2 F
P717.2 22 x 22 x 1/2 F
P165.02 8 Compression Olives
P165.03 10
P165.05 15
P165.07 22
P165.08 28
P165.09 3/4
P168.02 15 x 10 Reducing Set
P168.03 15 x 12
P168.04 22 x 15
Sterling Range BrassPart No. Size Description
ster
ling
rang
e
10 11st
erlin
g ra
nge
P901DR.05 15 Straight Coupling
P901DR.08 22
P901DR.18 15 x 10
P901DR.20 22 x 15
P902DR.15 15 x 1/2 Male Straight Adaptor
P902DR.21 22 x 3/4
P902DR.22 22 x 1
P902DR.23 28 x 1
P903DR.12 15 x 1/2 Female Straight Adaptor
P903DR.18 22 x 3/4
P903DR.19 22 x 1
P903DR.20 28 x 1
P921DR.1 15 Flanged Tank Connector
P921DR.2 22
P921DR.3 28
P923DR.4 15 Stop End
P923DR.5 22
P801DR.05 15 Equal Elbow
P801DR.08 22
P802DR.08 15 x 1/2 Male Parallel Elbow
P802DR.12 22 x 3/4
P802DR.13 22 x 1
P803WPDR.2 15 x 1/2 Wallplate Elbow
P701DR.05 15 Equal Tee
P701DR.08 22
Sterling Range D.Z.R.Part No. Size Description
stra
ight
fittin
gs Straight Couplingcu x cu
12
P901
13
P901
P901RP
Straight Coupling
Repair Couplings
stra
ight
fittin
gs
CODE SIZE PACK BOX
P901.01 6 20
P901.02 8 20 300
P901.03 10 20 200
P901.04 12 20
P901.042 14 20
P901.05 15 20 200
P901.062 16 20
P901.07 18 20
P901.08 22 10 100
P901.09 28 5 50
P901.10 35 1
P901.11 42 1
P901.12 54 1
P901.13 8 x 6 20
P901.14 10 x 8 20
P901.15 12 x 8 20
P901.16 12 x 10 20
P901.166 14 x 12 20
P901.17 15 x 8 20 300
P901.18 15 x 10 20 200
P901.19 15 x 12 20 200
P901.190 15 x 14 20
P901.192 16 x 15 20
P901.193 18 x 15 20
P901.20 22 x 15 10 100
P901.203 22 x 18 10
P901.21 28 x 15 1
P901.22 28 x 22 1
P901.23 35 x 28 1
P901.2361 42 x 35 1
P901.24 54 x 42 1
CODE SIZE PACK BOX
P901.25 67 1
P901.26 76.1 1
P901.27 108 1
P901DO
Straight Couplings
CODE SIZE PACK BOX
P901DO.1 15 20
P901DO.2 22 10
CODE SIZE PACK BOX
P901RP.1 15 x 75mm 20 100
P901RP.2 15 x 100mm 20 100
P901RP.3 15 x 125mm 20 100
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
stra
ight
fittin
gs Straight Adaptorscu x mi - Parallel
14 15
P902
P902B
Straight Adaptorscu x mi - Extended Threadc/w Back Nut
P902T
Straight Adaptors
stra
ight
fittin
gs
CODE SIZE PACK BOX
P902.02 6 x 1/4 20
P902.04 8 x 1/4 20 300
P902.05 8 x 3/8 20 300
P902.06 8 x 1/2 20 200
P902.07 10 x 1/4 20 200
P902.08 10 x 3/8 20 200
P902.09 10 x 1/2 20 200
P902.10 12 x 1/4 20 200
P902.11 12 x 3/8 20 200
P902.12 12 x 1/2 20 200
P902.124 14 x 3/8 20 200
P902.126 14 x 1/2 20 200
P902.13 15 x 1/4 20 200
P902.14 15 x 3/8 20 200
P902.15 15 x 1/2 20 200
P902.17 15 x 3/4 20 200
P902.174 16 x 3/8 20
P902.176 16 x 1/2 20
P902.18 18 x 1/2 20
P902.19 18 x 3/4 20
P902.20 22 x 1/2 10
P902.21 22 x 3/4 10 100
P902.22 22 x 1 10 100
P902.221 28 x 3/4 1 50
P902.23 28 x 1 5 50
P902.235 35 x 1 1
P902.24 35 x 11/4 1
P902.25 42 x 11/2 1
P902.26 54 x 2 1
P902.27 67 x 21/2 1
P902.28 76.1x 3 1
P902.29 108 x 4 1
CODE SIZE PACK BOX
P902B.1 15 x 1/2 20
P902B.2 22 x 3/4 10
P902B.3 28 x 1 5
P902B.4 35 x 11/4 1
P902B.5 42 x 11/2 1
CODE SIZE PACK BOX
P902T.02 6 x 1/4 20
P902T.04 8 x 1/4 20 300
P902T.05 8 x 3/8 20 300
P902T.06 10 x 1/4 20 300
P902T.07 10 x 3/8 20 200
P902T.08 10 x 1/2 20 200
P902T.09 12 x 1/4 20 200
P902T.10 12 x 3/8 20 200
P902T.11 12 x 1/2 20 200
P902T.12 15 x 1/4 20 300
P902T.13 15 x 3/8 20 200
P902T.14 15 x 1/2 20 200
P902T.18 22 x 3/4 10 100
P902T.182 22 x 1 10 100
P902T.185 28 x 3/4 10 50
P902T.19 28 x 1 5 50
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
17
Swivel Couplingcu x fi - (Tap Connector)
Straight Adaptor Short Thread - cu x fi
stra
ight
fittin
gs
stra
ight
fittin
gs Straight Adaptorscu x fi
16
P903 P903SF
P903ST
CODE SIZE PACK BOX
P903.002 6 x 1/4 20
P903.01 8 x 1/4 20 300
P903.02 8 x 3/8 20 300
P903.03 8 x 1/2 20 300
P903.04 10 x 1/4 20 200
P903.05 10 x 3/8 20 200
P903.06 10 x 1/2 20 200
P903.07 12 x 1/4 20 200
P903.08 12 x 3/8 20 200
P903.09 12 x 1/2 20 200
P903.096 14 x 1/2 20 200
P903.10 15 x 1/4 20 200
P903.11 15 x 3/8 20 200
P903.12 15 x 1/2 20 200
P903.14 15 x 3/4 20 200
P903.145 16 x 1/2 20
P903.15 18 x 1/2 20
P903.16 18 x 3/4 20
P903.17 22 x 1/2 10 100
P903.18 22 x 3/4 10 100
P903.19 22 x 1 10 100
P903.195 28 x 3/4 5 50
P903.20 28 x 1 5 50
P903.202 35 x 1 1
P903.21 35 x 11/4 1 30
P903.22 42 x 11/2 1
P903.23 54 x 2 1
P903.24 67 x 21/2 1
P903.25 76.1 x 3 1
P903.26 108 x 4 1
CODE SIZE PACK BOX
P903SF.1 15 x 1/2 20 200
P903SF.2 15 x 3/4 20 200
CODE SIZE PACK BOX
P903ST.1 15 x 1/2 20
P903ST.2 15 x 3/4 20
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
19
Equal Elbows
elbo
ws
stra
ight
fittin
gs
18
P801
CODE SIZE PACK BOX
P801.01 6 20
P801.02 8 20 300
P801.03 10 20 200
P801.04 12 20 200
P801.042 14 20 200
P801.05 15 20 200
P801.061 16 20
P801.07 18 20
P801.08 22 10 100
P801.09 28 5 50
P801.10 35 1
P801.11 42 1
P801.12 54 1
P801.035 12 x 10 20
P801.036 15 x 10 20
P801.075 18 x 15 20
P801.085 22 x 15 10
P801.089 22 x 18 10
P801.092 28 x 15 5
P801.098 28 x 22 1
P801.13 67 1
P801.14 76.1 1
P801.15 108 1
Straight FlangedTank Connector - cu x mic/w washers
P921
CODE SIZE PACK BOX
P921.1 15 20 100
P921.2 22 10 100
P921.3 28 5 50
Stop EndsP923
CODE SIZE PACK BOX
P923.1 8 20
P923.2 10 20
P923.3 12 20 300
P923.4 15 20 300
P923.45 18 20
P923.5 22 10 200
P923.6 28 5 100
P923.7 35 1
P923.8 42 1
P923.9 54 1
P923.10 67 1
P923.11 76.1 1
P923.12 108 1
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
elbo
ws Elbows with M.T. Cock
cu x cu
20 21
P801DO P802
Elbows
elbo
ws
CODE SIZE PACK BOX
P801DO.1 15 20
P801DO.2 22 10
Elbows cu x mi - Parallel
P802
CODE SIZE PACK BOX
P802.002 6 x 1/4 20
P802.01 8 x 1/4 20
P802.02 10 x 1/4 20
P802.03 10 x 3/8 20
P802.031 10 x 1/2 20
P802.04 12 x 1/4 20
P802.05 12 x 3/8 20
P802.051 12 x 1/2 20
P802.055 14 x 1/2 20
P802.06 15 x 1/4 20
P802.07 15 x 3/8 20
P802.08 15 x 1/2 20 200
P802.09 15 x 3/4 20
P802.095 16 x 1/2 20
P802.10 18 x 1/2 20
CODE SIZE PACK BOX
P802.105 18 x 3/4 20
P802.11 22 x 1/2 10
P802.12 22 x 3/4 10 100
P802.13 22 x 1 10 100
P802.14 28 x 1 5 50
P802.15 35 x 11/4 1
P802.16 42 x 11/2 1
P802.17 54 x 2 1
P802.18 67 x 21/2 1
P802.19 76.1 x 3 1
P802.20 108 x 4 1
P802DO
Elbow with M.T. Cock
CODE SIZE PACK BOX
P802DO.1 22 x 3/4 10
P802DO.3 28 x 1 5
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
elbo
ws Elbows
cu x mi - Taper
22 23
P802T P803
Elbows
P803SF
Swivel Elbowscu x fi - (tap connector)c/w washers
elbo
ws
Elbowscu x fi
P803
CODE SIZE PACK BOX
P802T.02 6 x 1/4 20
P802T.04 8 x 1/4 20 200
P802T.05 10 x 1/4 20 200
P802T.06 10 x 3/8 20 200
P802T.07 10 x 1/2 20 200
P802T.08 12 x 1/4 20
P802T.09 12 x 3/8 20
P802T.10 12 x 1/2 20
P802T.11 15 x 1/4 20
P802T.12 15 x 3/8 20
P802T.13 15 x 1/2 20
P802T.14 22 x 3/4 20 100
P802T.15 22 x 1 10 100
P802T.16 28 x 1 5 50
CODE SIZE PACK BOX
P803.031 10 x 1/2 20
P803.04 12 x 1/4 20
P803.05 12 x 3/8 20
P803.051 12 x 1/2 20
P803.054 14 x 1/2 20
P803.055 15 x 3/8 20
P803.06 15 x 1/2 20 200
P803.063 15 x 3/4 20 100
P803.064 16 x 1/2 20
P803.065 18 x 1/2 20
P803.066 18 x 3/4 20
P803.068 22 x 1/2 10
P803.07 22 x 3/4 10 100
P803.08 22 x 1 10 100
P803.09 28 x 1 5 50
P803.10 35 x 11/4 1
P803.11 42 x 11/2 1
P803.12 54 x 2 1
P803.13 67 x 21/2 1
P803.14 76.1 x 3 1
P803.15 108 x 4 1
CODE SIZE PACK BOX
P803SF.1 15 x 1/2 20 200
P803SF.2 22 x 3/4 10 100
CODE SIZE PACK BOX
P803.002 6 x 1/4 20
P803.01 8 x 1/4 20
P803.02 10 x 1/4 20
P803.03 10 x 3/8 20
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
elbo
ws Wallplate Elbow
cu x fi
24 25
P803WP P701
Equal Tees
tees
Bent Flanged Tank Connectorcu x mic/w washers
P821
CODE SIZE PACK BOX
P803WP.05 12 x 1/2 20
P803WP.08 14 x 1/2 20
P803WP.2 15 x 1/2 20 100
P803WP.25 16 x 1/2 20
P803WP.3 18 x 1/2 20
P803WP.35 18 x 3/4 20
P803WP.4 22 x 1/2 10
P803WP.5 22 x 3/4 10 50
CODE SIZE PACK BOX
P821.1 15 x 1/2 20
P821.2 22 x 3/4 10
P821.3 28 x 1 5
CODE SIZE PACK BOX
P701.01 6 20
P701.02 8 20 200
P701.03 10 20 200
P701.04 12 20
P701.041 14 20
P701.05 15 20 100
P701.043 16 20
P701.07 18 20
P701.08 22 10 50
P701.09 28 5 40
P701.10 35 1
P701.11 42 1
P701.12 54 1
P701.13 67 1
P701.14 76.1 1
P701.15 108 1
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
tees Tee with Reduced Branch
cu x cu x cu
26 27
P702 P702
Tee with Reduced Branch -
tees
P702.116 15 x 15 x 10 20
15 x 10 x 15
P702.125 15 x 15 x 12 20
15 x 12 x 15
P702.077 18 x 18 x 12 20
18 x 12 x 18
P702.078 18 x 18 x 15 20
18 x 15 x 18
P702.161 22 x 22 x 12 10
22 x 12 x 22
P702.16 22 x 22 x 15 10 50
22 x 15 x 22
P702.166 22 x 22 x 18 10
22 x 18 x 22
P702.19 28 x 28 x 15 5
28 x 15 x 28
P702.20 28 x 28 x 22 5 40
28 x 22 x 28
P702.22 35 x 35 x 15 1
35 x 15 x 35
P702.21 35 x 35 x 22 1
35 x 22 x 35
P702.23 35 x 35 x 28 1
35 x 28 x 35
P702.24 42 x 42 x 15 1
42 x 15 x 42
P702.25 42 x 42 x 22 1
42 x 22 x 42
P702.26 42 x 42 x 28 1
42 x 28 x 42
CODE SIZE PACK BOX
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
P702.38 67 x 67 x 15 1
67 x 15 x 67
P702.39 67 x 67 x 22 1
67 x 22 x 67
P702.40 67 x 67 x 28 1
67 x 28 x 67
P702.41 67 x 67 x 35 1
67 x 35 x 67
P702.42 67 x 67 x 42 1
67 x 42 x 67
P702.43 67 x 67 x 54 1
67 x 54 x 67
P702.44 76 x 76 x 15 1
76 x 15 x 76
P702.45 76 x 76 x 22 1
76 x 22 x 76
P702.46 76 x 76 x 28 1
76 x 28 x 76
P702.47 76 x 76 x 35 1
76 x 35 x 76
P702.48 76 x 76 x 42 1
76 x 42 x 76
P702.27 42 x 42 x 35 1
42 x 35 x 42
P702.33 54 x 54 x 15 1
54 x 15 x 54
P702.335 54 x 54 x 22 1
54 x 22 x 54
P702.34 54 x 54 x 28 1
54 x 28 x 54
P702.36 54 x 54 x 35 1
54 x 35 x 54
P702.37 54 x 54 x 42 1
CODE SIZE PACK BOX
tees
28 29te
esTee with Reduced Branch -continuedP702
Tee with End and Branchreduced - cu x cu x cu
CODE SIZE PACK BOX
P704
CODE SIZE PACK BOX
P704.076 18 x 15 x 15 20
18 x 15 x 15
P704.14 22 x 15 x 15 10 50
22 x 15 x 15
P704.169 22 x 18 x 18 10
22 x 18 x 18
P704.171 28 x 22 x 22 5
28 x 22 x 22
P704.168 28 x 15 x 15 5
28 x 15 x 15
P702.49 76 x 76 x 54 1
76 x 54 x 76
P702.50 76 x 76 x 67 1
76 x 67 x 76
Tee with two Ends Reducedcu x cu x cu
P705
CODE SIZE PACK BOX
P705.123 12 x 12 x 15 20
12 x 15 x 12
P705.126 15 x 15 x 18 20
15 x 18 x 15
P705.13 15 x 15 x 22 20
15 x 22 x 15
P705.165 22 x 22 x 28 10
22 x 28 x 22
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
Tee with Reduced Endcu x cu x cu
P703
CODE SIZE PACK BOX
P703.15 22 x 15 x 22 10 50
22 x 22 x 15
P703.17 28 x 15 x 28 5
28 x 28 x 15
P703.18 28 x 22 x 28 5
28 x 28 x 22
tees
30 31te
esTee with Female Iron Branchcu x cu x cu
P717P717WP
Wallplate Tee
CODE SIZE PACK BOX
P717.1 15 x 15 x 1/2 20 100
15 x 1/2 x 15
P717.17 18 x 18 x 1/2 20
18 x 1/2 x 18
P717.16 18 x 18 x 3/4 20
18 x 3/4 x 18
P717.2 22 x 22 x 1/2 10 50
22 x 1/2 x 22
P717.3 22 x 22 x 3/4 10
22 x 3/4 x 22
P717.5 28 x 28 x 1/2 5
28 x 1/2 x 28
P717.6 28 x 28 x 3/4 5
28 x 3/4 x 28
P717.4 28 x 28 x 1 5
28 x 1 x 28
CODE SIZE PACK BOX
P717WP.1 15 x 15 x 1/2 20
15 x 1/2 x 15
P717WP.2 22 x 22 x 1/2 10
P737
CODE SIZE PACK BOX
P737.1 15 x 1/2 x 15 20
15 x 15 x 1/2P737.3 22 x 1/2 x 22 10
22 x 22 x 1/2P737.4 28 x 1/2 x 28 5
28 x 28 x 3/4
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
Tee with Female Iron Endcu x fi x cu
com
pone
nts
an
dac
cess
orie
s Crossover
32 33
P707P163B
Blank Nuts
com
pone
nts
an
dac
cess
orie
s
P163
P163V
Air Vent
CODE SIZE PACK BOX
P163.01 6 100
P163.02 8 100
P163.03 10 100
P163.04 12 100
P163.004 14 100
P163.05 15 100 700
P163.055 16 100
P163.06 18 100
P163.07 22 50 500
P163.08 28 25 300
P163.09 35 1
P163.10 42 1
P163.11 54 1
CODE SIZE PACK BOX
P163B.01 6 100
P163B.02 8 100
P163B.03 10 100
P163B.035 12 100
P163B.036 14 100
P163B.4 15/1/2”BSP 100
P163B.45 16 100
P163B.46 18 100
P163B.6 22 50
P163B.5 3/4” BSP 50
P163B.8 28 25
P163B.7 1” BSP 25
P163B.71 35 1
P163B.07 42 1
P163B.08 54 1
CODE SIZE PACK BOX
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
CODE SIZE PACK BOX
P707.1 15mm 1
P707.15 18mm 1
P707.2 22mm 1
P707.3 28mm 1
com
pone
nts
an
dac
cess
orie
s
34 35
P165J17
One Piece Reducer
J17
com
pone
nts
an
dac
cess
orie
s
CODE SIZE PACK BOX
P165.01 6 50
P165.02 8 100
P165.03 10 100
P165.04 12 50
P165.045 14 50
P165.05 15 100 3000
P165.054 16 50
P165.06 18 50
P165.07 22 100 2000
P165.09 3/4 100 1000
P165.08 28 50 500
P165.10 35 10
P165.11 42 10
P165.12 54 10
P165.13 67 10
P165.14 76.1 10
P165.15 108 10
CODE SIZE PACK BOX
J17DR.14 8 x 6
J17DR.145 10 x 6
J17DR.15 10 x 8
J17DR.155 12 x 8
J17DR.16 12 x 10
J17DR.165 15 x 8
CODE SIZE PACK BOX
J17DR.17 15 x 10
J17DR.175 15 x 11
J17DR.18 15 x 12
J17DR.185 15 x 13
J17DR.19 18 x 12
J17DR.20 18 x 15
J17DR.201 18 x 16
J17DR.209 22 x 12
J17DR.21 22 x 15
J17DR.22 22 x 18
J17DR.27 28 x 12
J17DR.28 28 x 15
J17DR.285 28 x 18
J17DR.29 28 x 22
J17DR.32 35 x 22
J17DR.35 35 x 28
J17DR.42 42 x 22
J17DR.43 42 x 28
J17DR.44 42 x 35
J17DR.45 42 x 36
J17DR.52 54 x 22
J17DR.53 54 x 28
J17DR.54 54 x 35
J17DR.55 54 x 42
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
com
pone
nts
an
dac
cess
orie
s
36 37
P169Reducing Set
P168
com
pone
nts
an
dac
cess
orie
s
P172
Reducing Bushes
CODE SIZE PACK BOX
P169.1 15 20
P169.2 22 10
P169.3 28 5
CODE SIZE PACK BOX
P172.01 1/4 x 1/8 20
P172.02 3/8 x 1/8 20
P172.03 3/8 x 1/4 20
P172.04 1/2 x 1/8 20
P172.05 1/2 x 1/4 20
P172.06 1/2 x 3/8 20
P172.07 3/4 x 1/2 10
P172.08 1 x 1/2 10
P172.09 1 x 3/4 10
P172.10 11/4 x 1/2 10
P172.11 11/4 x 3/4 10
P172.12 11/4 x 1 10
P172.13 11/2 x 1/2 10
P172.14 11/2 x 3/4 10
P172.15 11/2 x 1 10
P172.16 11/2 x 11/4 10
P172.17 2 x 1/2 5
P172.18 2 x 3/4 5
P172.19 2 x 1 5
P172.20 2 x 11/4 5
P172.21 2 x 11/2 5
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
CODE SIZE PACK BOX
P168.005 10 x 8 20
P168.003 12 x 8 20
P168.006 12 x 10 20
P168.01 15 x 8 20
P168.02 15 x 10 20
P168.03 15 x 12 20
P168.033 18 x 10 20
P168.034 18 x 12 20
P168.035 18 x 15 20
P168.004 22 x 12 20
P168.04 22 x 15 20 500
P168.045 22 x 18 20
P168.049 28 x 12 10
P168.05 28 x 15 10
P168.06 28 x 22 10
P168.064 35 x 15 10
P168.065 35 x 22 10
P168.07 35 x 28 10
P168.075 42 x 15 10
P168.076 42 x 22 10
P168.08 42 x 28 10
P168.09 42 x 35 10
P168.010 54 x 15 10
P168.110 54 x 22 10
P168.1101 54 x 28 10
P168.13 67 x 54 1
P168.14 76.1 x 54 1
P168.15 76.1 x 67 1
P168.16 108 x 54 1
P168.17 108 x 67 1
P168.18 108 x 76.1 1
com
pone
nts
an
dac
cess
orie
s
38 39
P177 P179Brass Flanged Plugs
P178
com
pone
nts
an
dac
cess
orie
s
P180
Immersion Heater Plugc/w washers
CODE SIZE PACK BOX
P177.1 1/2 100 1000
P177.2B 3/4 25 500
P177.3 1 25 250
P177.4 11/4 1 250
P177.5 11/2 1
P177.8 13/4 1
P177.007 2 1
CODE SIZE PACK BOX
P179.1 1/2 20
P179.2 3/4 10
P179.3 1 5
P179.4 11/4 1
P179.5 11/2 1
P179.6 2 1
CODE SIZE PACK BOX
P180.1 21/4 10
CODE SIZE PACK BOX
P178.1 1/8 20
P178.2 1/4 20
P178.3 3/8 20
P178.4 1/2 20
P178.5 3/4 10
P178.6 1 5
P178.7 11/4 1
P178.8 11/2 1
P178.9 2 1
P182Tap Extension Piece
CODE SIZE PACK BOX
P182.1 1/2 x 1/2 20
P182.2 1/2 x 3/4 20
P182.3 3/4 x 3/4 10
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
com
pone
nts
an
dac
cess
orie
s 1/2 Type A MT Plugwith Gland ext. Thread x Hose
40 41
P183
com
pone
nts
an
dac
cess
orie
s
CODE SIZE PACK BOX
Type A MT Plug with Plain Shank for
P183
CODE SIZE PACK BOX
P183.3 15 20 200
P197
Fibre Washers
CODE SIZE PACK BOX
P197.1 1/2 50
P197.2 3/4 50
P197.3 1 50
P198
Rubber Washers
CODE SIZE PACK BOX
P198.001 8 50
P198.002 10 50
P198.1 15 50
P198.2 22 50
P198.3 28 50
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
com
pone
nts
an
dac
cess
orie
s
42 43co
mpo
nent
s a
nd
acce
ssor
ies
P601MBNBerlin Manifold
P444EF
CODE SIZE PACK BOX
P601MBN.1 8mm 20
P601MBN.2 10mm 20
CODE SIZE PACK BOX
P444EF.1 22mm 8/4 10
P444EF.2 22mm 8/3 10
P444EF.3 22mm 8/2 10
P444EF.4 22mm 10/4 10
P444EF.5 22mm 10/3 10
P444EF.6 22mm 10/2 10
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
Berlin Manifold blanking pieceP445EF
CODE SIZE PACK BOX
P445EF.1 10/8 10
Port ManifoldsP601
CODE SIZE PACK BOX
P601.1 22 x 2 Port 8mm 10
P601.3 22 x 4 Port 8mm 10
P601.01 22 x 2 Port 10mm 10 100
P601.03 22 x 4 Port 10mm 10 100
valv
es a
nd
stop
cock
s Crutch Head Stopcock
44 45
P460P474LS
Lockshield Gate Valve
* Available in DZR
Brass Gate Valve - BS 5154P474
valv
es a
nd
stop
cock
s
CODE SIZE PACK BOX
P460.1 15 10 50
P460.2 22 5
P460.3 28 1
P460.4 35 * 1
P460.5 42 * 1
P460.6 54 * 1
CODE SIZE PACK BOX
P474LS.1 15 20
P198Female Gate Valve
CODE SIZE PACK BOX
L198.1 1/2 5
L198.2 3/4 5
L198.3 1 3
L198.35 11/4 1
L198.4 11/2 1
L198.5 2 1
L198.55 21/2 1
L198.6 3 1
L198.7 4 1
CODE SIZE PACK BOX
P474.1 15 10 50
P474.2 22 5
P474.3 28 1
P474.4 35 * 1
P474.5 42 * 1
P474.6 54 * 1
Made in the U.K.All fittings are available in Standard Brass, DZR Brass, Natural, Nickel or Chrome Plate Finish. For ordering purposes please see the guidelines on page 6.
46 47
Jointing Techniques for Flowflex Compression Fittings
1.Ensure the tube conforms to thespecification.
2.Select the correct fitting for the size of thetube to be connected.
3.Ends of the tube for jointing must be cutcleanly across the tube diameter and befree from contamination, surface damage or defects.
4.Enter the tube through the thrust nut andcompression ring fully into fittings untilpositive contact is made with the tube stop.
5.Make sure the sealing faces of the joint andthreads are clean and free from swarf andany contamination. A little oil or grease onthe threads of the larger sizes of fittings isuseful in reducing friction during tightening.With correctly made joints, jointingcompounds should not be required,although in certain circumstances thesemay offer practical advantages.
6. Care should be taken that the compressionolive is not placed over any identificationmark or other indentation on the tube.
7.Hand tighten the thrust nuts until ALL slackin joint is taken up. Complete tightening inaccordance with table below, using a suitablespanner. Ensure the axial alignment of thetube and fittings during tightening operationand thereafter. Over-tightening should beavoided as this may destroy the watertightseal. Table below is for guidance purposes.
12mm 1.1/4 turns 28mm 1.1/4 turns15mm 1.1/4 turns 35mm 3/4 turn18mm 1.1/4 turns 42mm 3/4 turn22mm 1.1/4 turns 54mm 3/4 turn
Notes: Some Authorities and System Specifications preclude the useof jointing compounds or require thatonly certain proprietary material may beused. Before utilising jointing compoundit is the responsibility of the installer toensure compliance.
49MADE IN THE UK
straight fittingselbowsteescomponents and accessories
48
compression fittingsfor MDPE
stra
ight
fittin
gs
50 51
LP503
Female Coupler Straight Coupler
LP501
Straight Coupler
LP501
stra
ight
fittin
gs
LP531
CODE SIZE PACK BOX
LP503DR.10 20 x 1/2 20
LP503DR.11 25 x 1/2 10
LP503DR.13 25 x 3/4 10
LP503DR.18 32 x 1 5
CODE SIZE PACK BOX
LP531DR.10 20mm 20
LP531DR.11 25mm 10
LP531DR.12 32mm 5
CODE SIZE PACK BOX
LP501DR.10 20mm 20
LP501DR.11 25mm 10
LP501DR.12 32mm 5
CODE SIZE PACK BOX
LP501DR.20 20 x 15 20
LP501DR.205 20 x 22 20
LP501DR.21 25 x 15 10
LP501DR.22 25 x 22 10
LP501DR.23 32 x 22 5
LP501DR.24 32 x 28 5
LP501DR.25 35 x 32 5
Male coupler
LP502
CODE SIZE PACK BOX
LP502DR.10 20 x 1/2 20
LP501DR.11 25 x 1/2 10
LP502DR.13 25 x 3/4 10
LP502DR.18 32 x 1 5
Made in the U.K.
elbo
ws 90º Elbow
md x md
52 53
LP511 LP531WP
Wallplate Elbow
elbo
ws
CODE SIZE PACK BOX
LP511DR.10 20mm 10
LP511DR.11 25mm 5
90º Elbowmd x miLP512
CODE SIZE PACK BOX
LP512DR.10 20 x 1/2 10
LP512DR.13 25 x 3/4 5
90º Elbowmd x fiLP513
CODE SIZE PACK BOX
LP513DR.10 20 x 1/2 10
LP513DR.13 25 x 3/4 5
CODE SIZE PACK BOX
LP513WPDR.10 20 x 1/2 10
Made in the U.K.
tees
54 55co
mpo
nent
s a
nd
acce
ssor
iesTee
md x md x mdLP521
CODE SIZE PACK BOX
LP521 20 mm 10
LP521 25 mm 5
Tee with Reduced Branchmd x md x mdLP522
CODE SIZE PACK BOX
LP522DR.13 25 x 25 x 20 5
LP522DR.17 32 x 32 x 20 2
LP522DR.19 32 x 32 x 25 2
Tee with Female Iron Branchmd x md x fiLP523
CODE SIZE PACK BOX
LP523DR.10 20 x 20 x 1/2 10
LP500Compression Nut
CODE SIZE PACK BOX
LP500.02 20 50
LP500.04 25 50
LP500.06 32 25
LP500.15 1/2 50
LP500.16 3/4 50
LP775CCompression Ring
CODE SIZE PACK BOX
LP775C.1 20 100
LP775C.2 25 100
LP775C.3 32 50
LP770Imperial Class C Inserts
CODE SIZE PACK BOX
L770.001 3/8 100
L770.01 1/2 100
L770.02 3/4 50
L770.03 1 50
L770.04 11/4 50
L770.05 11/2 50
L770.06 2 50
Made in the U.K.
56 57
Jointing Techniques for Flowflex Compression Fittings
1.Ensure the tube conforms to thespecification. Select the correct fitting forthe size of the tube to be connected.
2. Insert the appropriate liner fully into the endof the pipe until the flange of the liner is incontact with the pipe end. If necessary usea sharp knife to produce a small chamferon the leading edge of the pipe bore.
3.Enter the tube through the thrust nut andcompression ring fully into fittings untilpositive contact is made with the tube stop.
4.Make sure the sealing faces of the joint andthreads are clean and free from swarf andany contamination. A little oil or grease onthe threads of the larger sizes of fittings isuseful in reducing friction during tightening.With correctly made joints, jointingcompounds should not be required,although in certain circumstances thesemay offer practical advantages.
5.Fully tighten using a suitable spanner. Over-tightening should be avoided asthis may destroy the watertight seal.
5958co
mpo
nent
s a
nd
acce
ssor
ies
CODE SIZE PACK BOX
J17.23 12 x 2.0 10
J17.24 15 x 2.5 10
J17.25 18 x 2.5 10
J17.26 20 x 2.5 10
J17.27 22 x 3.0 10
J17
CODE SIZE PACK BOX
PX901-04 15 x 12* 20 200
PX901-065 22 x 20* 10 100
PX901-05 15 x 15* 20 200
PX901-08 22 x 22* 10 100
PX901-085 28 x 25* 10 100
PX901
Made in the U.K.
For converting any compression end fitting
to Pex and layered pipe.
* Also available in DZR
compression fittingsfor pex and layeredpipe
copper capillary leadfree solder ring fittings
All Flowflex copper capillary lead free solder ring fittings are
manufactured under an accredited ISO 9002 quality management
system to conform to EN1254/BS864.
Sizes range from 8mm to 54mm.
straight fittingselbowsteescomponents and accessories
60 61
copp
er c
apilla
ry le
ad fr
eeso
lder
ring
fittin
gs
62 63st
erlin
g ra
nge
C901SR.05 15 Straight coupling †
C901SR.08 22
C901SR.09 28
C903SFSR.1 15 x 1/2 Straight Tap Connector †
C903SFSR.3 22 x 3/4
C904SR.20 22 x 15 Fitting Reducer †
C904SR.22 28 x 22
C801SR.05 15 Equal Elbow †
C801SR.08 22
C801SR.09 28
C803SR.05 15 Street Elbow †
C803SR.08 22
C803SFSR.1 15 x 1/2 Bent Tap Connector
C701SR.05 15 Equal Tee †
C701SR.08 22
C702SR.16 22 x 22 x 15 Reducing Tee †
Sterling RangePart No. Size Description
British StandardKitemark Approval
Flowflex fittings are produced under a qualitysystem assessed against BS EN ISO 9002Quality Systems.
In addition, Flowflex Components Ltd have beengranted the Kitemark licence that can be affixedto the goods manufactured by the companywhich are in conformity with BS EN 1254Copper and Copper Alloys - Capillary fittings.
Products currently Kitemarked approved within theSterling Range at the time of printing of thiscatalogue are listed with a †. The current full rangeof Kitemarked products is available on request.
stra
ight
fittin
gs
64
Straight CouplingC901SR
Metric/Imperial Adaptor*C901SR
C901SR.02 8 25
C901SR.03 10 25
C901SR.04 12 25
C901SR.05 15 25 1000
C901SR.08 22 25 400
C901SR.09 28 10 150
C901SR.10 35 1
C901SR.11 42 1
CODE SIZE PACK BOX
C901SR.27 15 x 1/2 25
C901SR.25 22 x 3/4 25 500
C901SR.26 28 x 1 10 200
C901SR.28 35 x 11/4 1
CODE SIZE PACK BOX
65st
raig
ht fi
ttingsC901SR
Reducing Coupling
P902TSRM.I. Straight Connector*
C901SR.17 15 x 8 25
C901SR.18 15 x 10 25
C901SR.19 15 x 12 25
C901SR.20 22 x 15 25 500
C901SR.21 28 x 15 10
C901SR.22 28 x 22 10
C901SR.231 35 x 22 1
C901SR.23 35 x 28 1
C901SR.236 42 x 28 1
C901SR.2361 42 x 35 1
C901SR.239 54 x 35 1
C901SR.24 54 x 42 1
CODE SIZE PACK BOX
P902TSR.12 15 x 1/4 20 200
P902TSR.14 15 x 1/2 20 200
P902TSR.18 22 x 3/4 10 100
P902TSR.19 28 x 1 10 50
P902TSR.20 35 x 11/4 1
P902TSR.21 42 x 11/2 1
CODE SIZE PACK BOX
*Other sizes available on request.
stra
ight
fittin
gs
66
F.I. Straight Connector*P903SR
Straight Tap ConnectorC903SFSR
P903SR.11 15 x 3/8 20 200
P903SR.12 15 x 1/2 20 200
CODE SIZE PACK BOX
C903SFSR.1 15 x 1/2 25 400
C903SFSR.2 15 x 3/4 25
C903SFSR.3 22 x 3/4 25 200
CODE SIZE PACK BOX
*Other sizes available on request.67
stra
ight
fittin
gsC904SRFitting Reducer
C904SR.17 15 x 8 25
C904SR.18 15 x 10 25
C904SR.19 15 x 12 25
C904SR.20 22 x 15 25 500
C904SR.21 28 x 15 10
C904SR.22 28 x 22 10 300
C904SR.232 35 x 15 1
C904SR.231 35 x 22 1
C904SR.23 35 x 28 1
C904SR.234 42 x 22
C904SR.236 42 x 28 1
C904SR.2361 42 x 35 1
C904SR.2375 54 x 22 1
C904SR.239 54 x 35 1
C904SR.24 54 x 42 1
CODE SIZE PACK BOX
elbo
ws
68
Equal ElbowC801SR
C801SR.02 8 25
C801SR.03 10 25
C801SR.04 12 25
C801SR.05 15 25 500
C801SR.08 22 25 300
C801SR.09 28 10 150
C801SR.10 35 1
C801SR.11 42 1
C801SR.12 54 1
CODE SIZE PACK BOX
M.I. Taper Elbow*P802TSR
P802TSR.13 15 x 1/2 20 200
P802TSR.14 22 x 3/4 10 100
CODE SIZE PACK BOX
F.I. Elbow*P803SR
P803SR.06 15 x 1/2 20 200
P803SR.07 22 x 3/4 10 100
CODE SIZE PACK BOX
*Other sizes available on request.69
elbo
ws
P803SFSR
Bent Tap Connector
C803SRStreet Elbow
C803SFSR.1 15 x 1/2 25 300
CODE SIZE PACK BOX
C803SR.05 15 25 500
C803SR.08 22 25 300
C803SR.09 28 10 150
CODE SIZE PACK BOX
P803WPSRWallplate Elbow
P803WPSR.2 15 x 1/2 25 20
CODE SIZE PACK BOX
elbo
ws
70
Obtuse ElbowC804SR
C804SR.05 15 25 500
C804SR.08 22 25 300
C804SR.09 28 10 150
C804SR.10 35 1
C804SR.11 42 1
C804SR.12 54 1
CODE SIZE PACK BOX
Bent Cylinder Union
C805SCSR
Bent Male Union ConnectorC806SCSR
C805SCSR.4 22 x 1 25
CODE SIZE PACK BOX
CODE SIZE PACK BOX
71te
esC701SREqual Tee
C702SRReducing Tee (branch)
C701SR.02 8 25
C701SR.03 10 25
C701SR.04 12 25
C701SR.05 15 25 700
C701SR.08 22 25 200
C701SR.09 28 10 100
C701SR.10 35 1
C701SR.11 42 1
C701SR.12 54 1
CODE SIZE PACK BOX
CODE SIZE PACK BOX
C702SR.16 22 x 22 x 15 25 25022 x 15 x 22
C702SR.19 28 x 28 x 15 10 10028 x 15 x 28
C702SR.20 28 x 28 x 22 10 10028 x 22 x 28
C702SR.205 35 x 35 x 15 1035 x 15 x 35
C702SR.21 35 x 35 x 22 135 x 22 x 35
C702SR.23 35 x 35 x 28 135 x 28 x 35
C702SR.25 42 x 42 x 22 142 x 22 x 42
C702SR.26 42 x 42 x 28 142 x 28 x 42
C702SR.27 42 x 42 x 35 142 x 35 x 42
C702SR.35 54 x 54 x 28 1
tees
72
Reducing TeeC703SR
Reducing Tee (branch)- ContC702SR
CODE SIZE PACK BOX
C703SR.15 22 x 15 x 22 25 200
22 x 22 x 15
C703SR.17 28 x 15 x 28 10 100
28 x 28 x 15
C703SR.18 28 x 22 x 28 10 100
28 x 28 x 22
C703SR.20 35 x 22 x 35 1
35 x 35 x 22
C703SR.21 35 x 28 x 35 1
35 x 35 x 28
Reducing TeeC704SR
CODE SIZE PACK BOX
C704SR.14 22 x 15 x 15 25 200
22 x 15 x 15
C704SR.171 28 x 22 x 22 10 100
CODE SIZE PACK BOX
C702SR.36 54 x 54 x 35 154 x 35 x 54
C702SR.37 54 x 54 x 42 154 x 42 x 54
73te
esC705SRReducing Tee
CODE SIZE PACK BOX
C705SR.13 15 x 15 x 22 25 200
15 x 22 x 15
C705SR.165 22 x 22 x 28 25
C706SRReducing Tee
CODE SIZE PACK BOX
C706SR.176 28 x 22 x 15 10
tees
74
F.I. Centre TeeP717SR
CODE SIZE PACK BOX
P717SR.1 15 x 15 x 1/2 20 100
15 x 1/2 x 15
P717SR.2 22 x 22 x 1/2 10 50
22 x 1/2 x 22
P717SR.3 22 x 22 x 3/4 10 50
22 x 3/4 x 22
P717SR.5 28 x 28 x 1/2 10 40
28 x 1/2 x 28
P717SR.6 28 x 28 x 3/4 10 40
F.I. End TeeP737SR
CODE SIZE PACK BOX
P737SR.1 15 x 1/2 x 15 20 10015 x 15 x 1/2
P737SR.2 22 x 1/2 x 22 10 5022 x 22 x 1/2
P737SR.4 28 x 1/2 x 28 10 4028 x 28 x 1/2
75co
mpo
nent
s a
nd
acce
ssor
ies
C708SRPart Crossover
CODE SIZE PACK BOX
C708SR.1 15 25
C708SR.2 22 25
C905SCSRStraight Cylinder Union
CODE SIZE PACK BOX
C905SCSR.2 15 x 1/2 25
C905SCSR.5 22 x 1 25
C707SRFull Crossover
CODE SIZE PACK BOX
C707SR.1 15 25
com
pone
nts
an
dac
cess
orie
s
76
Stop EndC923SR
CODE SIZE PACK BOX
C923SR.1 8 25
C923SR.2 10 25
C923SR.3 12 25
C923SR.4 15 25
C923SR.5 22 25
C923SR.6 28 10
C923SR.7 35 1
C923SR.8 42 1
C923SR.9 54 1
Straight Male UnionC906SCSR
CODE SIZE PACK BOX
C906SCSR.1 15 x 1/2 25
C906SCSR.5 22 x 3/4 25
77
Jointing Techniques forFlowflex Copper Capillary Lead Free Solder Ring
1.Ensure the tube conforms to thespecification.
2.Select the correct fitting for the size of thetube to be connected.
3.Ends of the tube for jointing must be cutcleanly across the true diameter and befree from contamination, surface damage ordefects.
4. Flux should be applied to the copper tubein accordance with the manufacturers’instructions.
5.Push fittings onto copper tube to full depthof socket.
6.Make joint by applying heat evenly untilsolder appears between copper tube andfitting.
7.Remove excess solder if necessary.
79
copper capillary
end feed fittings
All Flowflex copper capillary end feed fittings are manufactured
under an accredited BS EN ISO 9002 quality management system
to conform to EN1254/BS 864. Sizes range from 8mm to 54mm
and are suitable for hot and cold water services, central heating
and other general engineering applications.
Sizes 67 -159mm large size copper fitting are avaliable but require
the use of brazing alloys. Soft solder joining not permitted.
straight fittingselbowsteescomponents and accessories
78
copp
er c
apilla
ry e
nd fe
ed fi
ttings
80 81st
erlin
g ra
nge
C901EF.05 15 Straight Coupler †
C901EF.08 22
C901EF.09 28
C904EF.18 15 x 10 Fitting Reducer
C904EF.20 22 x 15
C904EF.22 28 x 22
C903SFEF.1 15 x 1/2 Straight Tap Connector †
C903SFEF.3 22 x 3/4
C801EF.05 15 Equal Elbow †
C801EF.08 22
C801EF.09 28
C803EF.05 15 Street Elbow †
C803EF.08 22
C803SFEF.1 15 x 1/2 Bent Tap Connector †
C701EF.05 15 Equal Tee
C701EF.08 22
C702EF.16 22 x 22 x 15 Reducing Tee
C703EF.15 22 x 15 x 22
C704EF.14 22 x 15 x 15
Sterling RangePart No. Size Description
British StandardKitemark Approval
Flowflex fittings are produced under a qualitysystem assessed against BS EN ISO 9002Quality Systems.
In addition, Flowflex Components Ltd have beengranted the Kitemark licence that can be affixedto the goods manufactured by the companywhich are in conformity with BS EN 1254Copper and Copper Alloys - Capillary fittings.
Products currently Kitemarked approved within theSterling Range at the time of printing of thiscatalogue are listed with a †. The current full rangeof Kitemarked products is available on request.
stra
ight
fittin
gs
82 83
Straight CouplerC901EF
stra
ight
fittin
gs
C901EF
C901EFMetric/Imperial Coupler*
C904EFFitting Reducer*
CODE SIZE PACK BOX
C901EF.02 8 25 2000
C901EF.03 10 25 2000
C901EF.05 15 25 1000
C901EF.08 22 25 500
C901EF.09 28 25 200
C901EF.10 35 10 200
C901EF.11 42 5 150
C901EF.12 54 5 100
C901EF.13 67 2 50
C901EF.14 76 1
C901EF.15 108 1
CODE SIZE PACK BOX
C901EF.245 15 x 1/2 25 1000
C901EF.25 22 x 3/4 25 500
C901EF.26 28 x 1 10 200
CODE SIZE PACK BOX
C904EF.14 10 x 8 25
C904EF.17 15 x 8 25 1000
C904EF.18 15 x 10 25 1000
C904EF.19 15 x 12 25 1000
C904EF.20 22 x 15 25 800
C904EF.21 28 x 15 25 300
C904EF.22 28 x 22 10 300
C904EF.226 35 x 15 10 150
C904EF.225 35 x 22 10 150
C904EF.23 35 x 28 10 150
C904EF.233 42 x 15 5 100
C904EF.234 42 x 22 5 100
C904EF.236 42 x 28 5 100
C904EF.2361 42 x 35 5 80
C904EF.2370 54 x 15 5 100
C904EF.2375 54 x 22 5 100
C904EF.238 54 x 28 5 100
C904EF.239 54 x 35 5 100
C904EF.30 67 x 54 1CODE SIZE PACK BOX
C901EF.20 22 x 15 1 500
C901EF.21 28 x 15 25 300
C901EF.22 28 x 22 10 300 Long Fitting Reducer
CODE SIZE PACK BOX
C904LEF.17 15 x 8 25 1000
C904LEF.18 15 x 10 25 1000
C904LEF
*Other sizes and bronze fittings are available on request.
stra
ight
fittin
gs
84 85st
raig
ht fi
ttings
Straight Tap Connector
M.I. Taper Coupler*P902TEF
CODE SIZE PACK BOX
C903SFEF.1 15 x 1/2 25 250
C903SFEF.2 15 x 3/4 25 250
CODE SIZE PACK BOX
P902TEF.04 8 x 1/4 25 300
P902TEF.09 12 x 1/4 25
P902TEF.12 15 x 1/4 25 200
P902TEF.14 15 x 1/2 20 200
P902TEF.18 22 x 3/4 10 100
P902TEF.19 28 x 1 5 50
F.I. Coupler*P903EF
CODE SIZE PACK BOX
P903EF.12 15 x 1/2 20 200
P903EF.18 22 x 3/4 10 100
P903EF.20 28 x 1 5 50
C905SCEFStraight Cylinder Connector
C905SCEF.4 22 x 1 25 150
C905SCEF.5 28 x 1 10 100
CODE SIZE PACK BOX
C903SFEF
*Other sizes and bronze fittings are available on request.
elbo
ws
86 87
Equal ElbowC801EF
elbo
ws
Street ElbowC803EF
Bent Tap ConnectorC803SFEF
C803(OB)EFObtuse Street Elbow
C804EFObtuse Elbow*
CODE SIZE PACK BOX
C801EF.02 8 25 3000
C801EF.03 10 25 3000
C801EF.05 15 25 1000
C801EF.08 22 25 300
C801EF.09 28 10 200
C801EF.10 35 5 100
C801EF.11 42 5 60
C801EF.12 54 2 30
C801EF.13 67 1 15
C801EF.14 76 1
C801EF.15 108 1
CODE SIZE PACK BOX
C803SFEF.1 15 x 1/2 25 300
C803SFEF.2 22 x 3/4 25 250
CODE SIZE PACK BOX
C803(OB)EF.05 15 25 1000
C803(OB)EF.08 22 25 400
C803(OB)EF.09 28 10 200
C803(OB)EF.10 35 5
C803(OB)EF.11 42 5
C803(OB)EF.12 54 2
CODE SIZE PACK BOX
C803EF.05 15 25 1000
C803EF.08 22 25 400
C803EF.09 28 10 200
C803EF.10 35 5 100
C803EF.11 42 5 60
C803EF.12 54 2 30
CODE SIZE PACK BOX
C804EF.05 15 25 1000
C804EF.08 22 25 100
C804EF.09 28 10 200
C804EF.10 35 5 100
C804EF.11 42 5 60
C804EF.12 54 2 30
C804EF.13 67 1
Wallplate Elbow
CODE SIZE PACK BOX
P803WPEF
*Other sizes and bronze fittings are available on request.
elbo
ws
88 89
M.I. Taper Elbow*P802TEF
teesC701EF
Equal Tee
F.I. Elbow*P803EF
C702EFReducing Tee*
C702EF.121 15 x 15 x 8 25 1000
15 x 8 x 15
C702EF.133 15 x 15 x 10 25 1000
15 x 10 x 15
C702EF.16 22 x 22 x 15 25 250
22 x 15 x 22
C702EF.19 28 x 28 x 15 10 120
28 x 15 x 28
C702EF.20 28 x 28 x 22 10 120
28 x 22 x 28
C702EF.22 35 x 35 x 15 10
35 x 15 x 35
C702EF.225 35 x 35 x 22 5 50
35 x 22 x 35
C702EF.23 35 x 35 x 28 5 50
35 x 28 x 35
CODE SIZE PACK BOX
P802TEF.13 15 x 1/2 20 200
P802TEF.14 22 x 3/4 10 100
CODE SIZE PACK BOX
P803EF.06 15 x 1/2 20 200
P803EF.07 22 x 3/4 10 100
P803EF.09 28 x 1 5 50
CODE SIZE PACK BOX
CODE SIZE PACK BOX
C701EF.02 8 25 1000
C701EF.03 10 25 1000
C701EF.05 15 25 600
C701EF.08 22 25 250
C701EF.09 28 10 100
C701EF.10 35 5 60
C701EF.11 42 5 40
C701EF.12 54 2 20
C701EF.13 67 1 15
C701EF.14 76 1
C701EF.15 108 1
Sizes in RED italic indicate European Specification
Bent Male Union ConnectorC806SCEF
CODE SIZE PACK BOX
Bent Cylinder Connector
CODE SIZE PACK BOX
C805SCEF.4 22 x 1 25 200
C805SCEF
*Other sizes and bronze fittings are available on request.
tees
90 91
Reducing Tee* - continuedC702EF
tees
C702EF.24 42 x 42 x 15 5 50
42 x 15 x 42
C702EF.25 42 x 42 x 22 5
42 x 22 x 42
C702EF.26 42 x 42 x 28 5 50
42 x 28 x 42
C702EF.27 42 x 42 x 35 5
42 x 35 x 42
C702EF.33 54 x 54 x 15 5 20
54 x 15 x 54
C702EF.34 54 x 54 x 22 2 20
54 x 22 x 54
C702EF.35 54 x 54 x 28 2 20
54 x 28 x 54
C702EF.36 54 x 54 x 35 2
54 x 35 x 54
C702EF.37 54 x 54 x 42 2 20
54 x 42 x 54
CODE SIZE PACK BOX
Reducing Tee*C703EF
CODE SIZE PACK BOX
C703EF.123 15 x 10 x 15 25 1000
15 x 15 x 10
C703EF.15 22 x 15 x 22 25 250
22 x 22 x 15
C703EF.17 28 x 15 x 28 10 120
28 x 28 x 15
C701EFReducing Tee* - continued
CODE SIZE PACK BOX
C703EF.18 28 x 22 x 28 10 120
C704EFReducing Tee*
CODE SIZE PACK BOX
C704EF.1210 15 x 10 x 10 25 1000
15 x 10 x 10
C704EF.14 22 x 15 x 15 25 300
22 x 15 x 15
C704EF.168 28 x 15 x 15 10 200
28 x 15 x 15
C704EF.171 28 x 22 x 22 10 120
28 x 22 x 22
C704EF.1710 35 x 28 x 28 5 50
35 x 28 x 28
C705EFReducing Tee*
CODE SIZE PACK BOX
C705EF.121 10 x 10 x 15 25 1000
10 x 15 x 10
C705EF.13 15 x 15 x 22 25 300
15 x 22 x 15
C705EF.165 22 x 22 x 28 10 120
22 x 28 x 22
*Other sizes and bronze fittings are available on request.
tees
92 93co
mpo
nent
s a
nd
acce
ssor
ies
C707EFFull CrossoverF.I. Centre Tee
P717EF
P717EF.1 15 x 15 x 1/2 20 100
15 x 1/2 x 15
P717DEF.2 22 x 22 x 1/2 10 50
22 x 1/2 x 22
P717EF.5 28 x 28 x 1/2 5 40
28 x 1/2 x 28
CODE SIZE PACK BOX
C707EF.1 15 25
CODE SIZE PACK BOX
C708EFPart Crossover
C708EF.1 15 25
C708EF.2 22 25 100
CODE SIZE PACK BOX
F.I. End TeeP737EF
P737EF.1 15 x 1/2 x 15 25
15 x 15 x 1/2
P737EF.2 22 x 1/2 x 22 10 50
22 x 22 x 1/2
P737EF.3 28 x 1/2 x 28 5 40
28 x 28 x 1/2
CODE SIZE PACK BOX
com
pone
nts
an
dac
cess
orie
s
94 95
End Cap/Stop End*C923EF
C923EF.1 8 25 2000
C923EF.2 10 25 2000
C923EF.4 15 25 3000
C923EF.5 22 25 800
C923EF.6 28 10 500
C923EF.7 35 5
C923EF.8 42 5
C923EF.9 54 2
CODE SIZE PACK BOX
Air Vent CapP440EF
P440EF.1 15 25
P440EF.2 22 25
CODE SIZE PACK BOX
Jointing Techniques for Flowflex Copper Capillary End Feed Fittings
1.Ensure the tube conforms to thespecification.
2.Select the correct fitting for the size of thetube to be connected.
3.Ends of the tube for jointing must be cutcleanly across the true diameter and befree from contamination, surface damage ordefects.
4.Clean end of pipe to be jointed with wirewool.
5. Flux should be applied to the copper tubein accordance with the manufacturers’instructions.
6.Push fittings onto copper tube to full depthof socket.
7.Make joint by applying heat evenly andapply solder as required.
8.Remove excess solder if necessary.
9.67mm - 159mm copper fittings must behard soldered using "silver brazing alloy"rods. Soft soldering is not permitted.
*Other sizes and bronze fittings are available on request.
9796
radiator valves manualthermostatic
99th
erm
osta
tic ra
diat
or v
alve
s
TRV001
TVR001 15 100
CODE SIZE PACK BOX
man
ual r
adia
tor v
alve
s
98
Straight Radiator ValveP461STRCP
P461STRCP.4 15 100
CODE SIZE PACK BOX
Radiator Valve with Drain OffP461CPDO
P461CPDO.4 15 100
CODE SIZE PACK BOX
Radiator Valve with Double'O' Ring Seal P461SSCP
P461SSCP.4 15 100
CODE SIZE PACK BOX
Manual Radiator ValveP461CP
P461CP.1 8 100
P461CP.2 10 100
P461CP.4 15 100
Brass version in 15mm only - P461.4
CODE SIZE PACK BOX
Thermostatic Radiator Valve
101
valvescocksmanifoldsflexible tap connectors
100
brassfoundryproducts
This Brassfoundry section brings together those items most often
purchased. Further sizes may be found under the relevant sections
in this catalogue.
All these popular products are tested to the rigorous quality
standards Flowflex employ throughout their manufacturing process
and the greater majority can be identified by the Flowflex name
stamped on each component.
valv
es, c
ocks
an
dm
anifo
lds 1/2 Type A MT Plug
with Gland ext. Thread x Hose
102 103
P183
valv
es, c
ocks
an
dm
anifo
lds
CODE SIZE BOX
P183.1 1/2 200
Type A MT Plug with Plain Shank for
P183
CODE SIZE BOX
P183.3 15 200
HUBT
CODE SIZE BOX
HUBT.01 1/2 without checkvalve 80
HUBT.02 3/4 without checkvalve 60
HUBTDC.01 1/2 with checkvalve 72
P479.1 wall bracket c/w tube 100
Crutch Head Stopcock
P460
CODE SIZE BOX
P460.1 15 50
P460.2 22 25
P460.3 28 48
P460.5 42 poly x cu 80
Combi-Filler LoopP468
CODE SIZE BOX
P468.1 15 x 1/2 straight 50
P468.2 15 x 1/2 tee 50
valv
es, c
ocks
an
dm
anifo
lds
104 105va
lves
, coc
ks a
nd
man
ifold
s
BV04
CODE SIZE BOX
BV.04 1/2 Part 1 50
BV05
CODE SIZE BOX
BV.05 1/2 Part 2 50
Brass Gate Valve - BS 5154P474
CODE SIZE BOX
P474.1 15 60
P474.2 22 40
P474.3 28 50
Pump Valve - Gate TypeP477
CODE SIZE BOX
P477.2 22 x 11/2 100
P477.3 28 x 11/2 80
Pump Valve - Ball TypeP478
CODE SIZE BOX
P478.2 22 x 11/2 100
P478.3 28 x 11/2 80
Double Checkvalve - in DZRP461
P470.1 15 200
P470.2 22 150
P470.3 28 100
CODE SIZE BOX
valv
es, c
ocks
an
dm
anifo
lds Isolating Valve
Chrome Plated cu x cu
106 107
P472CP
valv
es, c
ocks
an
dm
anifo
lds
CODE SIZE BOX
P472CP.1 15 200
P472CP.2 22 150
P473CPFB.2 15 full bore 200
P472CPBH.1 15 with black handle 200
Isolating ValveBrass cu x cu
P472
CODE SIZE BOX
P472.1 15 200
P472.2 22 150
Washing Machine ValveP462WMT
CODE SIZE BOX
P462WMT.1 15 x 3/4 Straight 210
P467.1 15 x 3/4 Elbow 200
P467.2 15 x15 x 3/4 Tee 200
P481
CODE SIZE BOX
P481CP.1 15 x 1/2 Straight 200
P473BCP.1 15 x 1/2 Angled 200
Ever Arm Ball Valvecu x cu
7111
CODE SIZE BOX
7111 15 120
7112 22 80
7113 28 60
Port ManifoldsP601
CODE SIZE BOX
P601.1 22 x 2 Port 10mm 10
P601.3 22 x 4 Port 10mm 10
flexi
ble
tap
conn
ecto
rs Flexible Tap ConnectorsStandard Bore
108 109
P466
flexi
ble
tap
conn
ecto
rs
CODE SIZE BOX
P466.1 15 x 1/2 x 300 100
P466.2 15 x 3/4 x 300 80
P466.3 22 x 3/4 x 300 80
P466.7 15 x 15 x 300 cu x fi 100
P466.8 22 x 22 x 300 cu x cu 100
P462MT2
CODE SIZE BOX
P462MT.2 15 x 10 x 300 (pair) 100
P462MT.3 15 x 12 x 300 (pair) 100
Flexible Tap Connectors
P466
CODE SIZE BOX
P466.9 15 x 1/2 x 300 100
P466.12 15 x 1/2 x 500 25
P466.10 22 x 3/4 x 300 100
Flexible Tap Connectors
P466
CODE SIZE BOX
P466.13 15 x 15 x 300 100
Standard Bore with Isolating Valve cu x fi
P475
CODE SIZE BOX
P475.1 15 x 1/2 x 300 200
PTFE TapePTFE
CODE BOX
PTFEW.01 For use with water 100
PTFEG.02 For use with gas 100
Solid Wire on ReelPTFE
CODE BOX
SW.LF Lead free solder wire 500gms
SW.L Lead solder wire 500gms
Mono Block Mixer TapStandard Bore
note
s
110 111no
tes