1/2 inch superflex and flex jumper cables

2
SPECIFICATION TECHNIQUE Data Sheet BRETELLES DE RACCORDEMENT / Jumper Cables AST-B01 Page: 1/1 Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A0 - 22 / 11 / 2000 DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - [email protected] - Site : www.acome.fr 1/2" SUPER FLEXIBLE JUMPERS - 7/16 male connectors 1. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics Impédance caractéristique / Impedance : 50 ± ± ± 1 Ω Ω Ω Fréquence d'utilisation / Operating frequency range : DC - 3.6 GHz Puissance efficace / RMS power (40°C - 2 GHz) : 0.52 kW Vitesse de propagation / Velocity : 84 % Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec 2 porteuses à 20 W : - 153 dBc / 3 rd order intermodulation product measured in swept frequency mode with 2 x 20 W carriers 2. CARACTERISTIQUES MECANIQUES / Mechanical characteristics Conducteurs intérieur et extérieur soudés à 100 % (périphérie) sur le connecteur Inner and outer contact 100 % soldered to the connector Matière et protection du corps : LAITON argenté / Material and finish of the body : Silver-plated brass Matière et protection de l'écrou d'accouplement : LAITON nickelé / Material and finish of the coupling nut : Nickel-plated brass Matière et protection du contact intérieur : BRONZE argenté / Material of finish of inner conductor : Silver-plated Bronze Etanchéité à l'accouplement / Coupling waterproofing : joint torique en SILICONE / Silicone rubber O-ring Couple de serrage / Coupling torque : 25 N.m max. Température d'utilisation. / Operating temperature range : - 40° C < < < θ θ θ < < < + 70° C Rayon de courbure mini / Minimum bending radius : 35 mm Indice d'étanchéité / Waterproofing index : IP67 - IP 68 (3 m / 3 h) Connecteurs / Connectors Longueur Length (m) Reference VSWR (1 GHz) VSWR (2 GHz) Affaiblissemenrt Attenuation (1 GHz) Affaiblissemenrt Attenuation (2 GHz) 7/16 mâle 1 1.5 2 2.5 3 4 5 C0021A C0016A C0022A C0023A C0018A C0246A C0248A 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.10 1.10 1.10 1.10 1.10 1.10 1.10 0.21 0.30 0.40 0.50 0.59 0.78 0.97 0.26 0.39 0.52 0.65 0.78 1.04 1.30 Retour sommaire

Upload: aerial-oy

Post on 27-Jun-2015

182 views

Category:

Devices & Hardware


5 download

DESCRIPTION

1/2 inch Superflex and Flex jumper cables

TRANSCRIPT

Page 1: 1/2 inch Superflex and Flex jumper cables

SPECIFICATION TECHNIQUEData Sheet

BRETELLES DE RACCORDEMENT / Jumper Cables

AST-B01Page: 1/1

Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A0 - 22 / 11 / 2000DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - [email protected] - Site : www.acome.fr

1/2" SUPER FLEXIBLE JUMPERS - 7/16 male connectors

1. CARACTERISTIQUES ELECTRIQUES / Electrical characteristicsImpédance caractéristique / Impedance : 50 ±±±± 1 ΩΩΩΩFréquence d'utilisation / Operating frequency range : DC - 3.6 GHzPuissance efficace / RMS power (40°C - 2 GHz) : 0.52 kWVitesse de propagation / Velocity : 84 %Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec 2 porteuses à 20 W : ≤≤≤≤ - 153 dBc/ 3rd order intermodulation product measured in swept frequency mode with 2 x 20 W carriers

2. CARACTERISTIQUES MECANIQUES / Mechanical characteristicsConducteurs intérieur et extérieur soudés à 100 % (périphérie) sur le connecteurInner and outer contact 100 % soldered to the connectorMatière et protection du corps : LAITON argenté/ Material and finish of the body : Silver-plated brassMatière et protection de l'écrou d'accouplement : LAITON nickelé/ Material and finish of the coupling nut : Nickel-plated brassMatière et protection du contact intérieur : BRONZE argenté/ Material of finish of inner conductor : Silver-plated BronzeEtanchéité à l'accouplement / Coupling waterproofing : joint torique en SILICONE / Silicone rubber O-ringCouple de serrage / Coupling torque : 25 N.m max.Température d'utilisation. / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° CRayon de courbure mini / Minimum bending radius : 35 mmIndice d'étanchéité / Waterproofing index : IP67 - IP 68 (3 m / 3 h)

Connecteurs / ConnectorsLongueur

Length(m)

ReferenceVSWR

(1 GHz)

VSWR

(2 GHz)

AffaiblissemenrtAttenuation

(1 GHz)

AffaiblissemenrtAttenuation

(2 GHz)

7/16 mâle

11.52

2.5345

C0021AC0016AC0022AC0023AC0018AC0246AC0248A

1.051.051.051.051.051.051.05

1.101.101.101.101.101.101.10

0.210.300.400.500.590.780.97

0.260.390.520.650.781.041.30

•••• Retour sommaire

Page 2: 1/2 inch Superflex and Flex jumper cables

SPECIFICATION TECHNIQUEData Sheet

BRETELLES DE RACCORDEMENT / Jumper Cables

AST-B02Page: 1/1

Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A0 - 22 / 11 / 2000

DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - [email protected] - Site : www.acome.fr

1/2" FLEXIBLE JUMPERS - 7/16 male connectors type

1. CARACTERISTIQUES ELECTRIQUES / Electrical characteristicsImpédance caractéristique / Impedance : 50 ±±±± 1 ΩΩΩΩFréquence d'utilisation / Operating frequency range : DC - 3.6 GHzPuissance efficace / RMS power (40°C - 2 GHz) : 0.83 kWVitesse de propagation / Velocity : 88 %Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec 2 porteuses à 20 W : ≤≤≤≤ - 153 dBc/ 3rd order intermodulation product measured in swept frequency mode with 2 x 20 W carriers

2. CARACTERISTIQUES MECANIQUES / Mechanical characteristicsConducteurs intérieur et extérieur soudés à 100 % (périphérie) sur le connecteurInner and outer contact 100 % soldered to the connectorMatière et protection du corps : LAITON argenté/ Material and finish of the body : Silver-plated brassMatière et protection de l'écrou d'accouplement : LAITON nickelé/ Material and finish of the coupling nut : Nickel-plated brassMatière et protection du contact intérieur : BRONZE argenté/Material and finish of inner conductor : Silver-plated BronzeEtanchéité à l'accouplement / Coupling waterproofing : joint torique en SILICONE / Silicone rubber O-ringCouple de serrage / Coupling torque : 25 N.m max.Température d'utilisation. / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° CRayon de courbure mini / Minimum bending radius : 70 mmIndice d'étanchéité / Waterproofing index : IP 67 - IP 68 ( 3m / 3h )

Connecteurs / Connectors

LongueurLength

(m)Reference

VSWR

(1 GHz)

VSWR

(2 GHz)

AffaiblissemenrtAttenuation

(1 GHz)

AffaiblissemenrtAttenuation

(2 GHz)

7/16 mâle

11.52

2.53

C0076AC0017AC0020AC0077AC0019A

1.051.051.051.051.05

1.101.101.101.101.10

0.170.210.250.290.33

0.200.250.300.350.40

•••• Retour sommaire